It makes sense to include the owner name (LHS) and record type in the
output, so that they can be checked for correctness.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Comment out bits of code that are only used when we *have* pid
namespaces, to avoid "unused code" warnings.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <xno817tnds.fsf@greed.delorie.com>
If the build itself is run in a container, we may not be able to
fully set up a nested container for test-container testing.
Notably is the mounting of /proc, since it's critical that it
be mounted from within the same PID namespace as its users, and
thus cannot be bind mounted from outside the container like other
mounts.
This patch defaults to using the parent's PID namespace instead of
creating a new one, as this is more likely to be allowed.
If the test needs an isolated PID namespace, it should add the "pidns"
command to its init script.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Use INT_STRLEN_BOUND to proper get the maximum pid_t size. Also
fix the wrong calculation (the 3 should multiply the sizeof (pid_t)).
Checked on x86_64-linux-gnu.
Check if the socket support 64-bit network packages timestamps
(SO_TIMESTAMP and SO_TIMESTAMPNS). This will be used on recvmsg
and recvmmsg tests to check if the timestamp should be generated.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Add new helpers support_create_and_chdir_toolong_temp_directory and
support_chdir_toolong_temp_directory to create and descend into
directory trees longer than PATH_MAX.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Some functions (e.g. stpcpy, pread64, etc.) had moved to POSIX in the
main headers as they got incorporated into the standard, but their
fortified variants remained under __USE_GNU. As a result, these
functions did not get fortified when _GNU_SOURCE was not defined.
Add test wrappers that check all functions tested in tst-chk0 at all
levels with _GNU_SOURCE undefined and then use the failures to (1)
exclude checks for _GNU_SOURCE functions in these tests and (2) Fix
feature macro guards in the fortified function headers so that they're
the same as the ones in the main headers.
This fixes BZ #28746.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Check if the socket support 64-bit network packages timestamps
(SO_TIMESTAMP and SO_TIMESTAMPNS). This will be used on recvmsg
and recvmmsg tests to check if the timestamp should be generated.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
On Ice Lake and Tiger Lake laptops, some test programs timeout when there
are 3 "make check -j8" runs in parallel. Add --with-timeoutfactor=NUM to
specify an integer to scale the timeout of test programs, which can be
overriden by TIMEOUTFACTOR environment variable.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This is the first of a 2-part patch set that fixes slow DSO sorting behavior in
the dynamic loader, as reported in BZ #17645. In order to facilitate such a
large modification to the dynamic loader, this first patch implements a testing
framework for validating shared object sorting behavior, to enable comparison
between old/new sorting algorithms, and any later enhancements.
This testing infrastructure consists of a Python script
scripts/dso-ordering-test.py' which takes in a description language, consisting
of strings that describe a set of link dependency relations between DSOs, and
generates testcase programs and Makefile fragments to automatically test the
described situation, for example:
a->b->c->d # four objects linked one after another
a->[bc]->d;b->c # a depends on b and c, which both depend on d,
# b depends on c (b,c linked to object a in fixed order)
a->b->c;{+a;%a;-a} # a, b, c serially dependent, main program uses
# dlopen/dlsym/dlclose on object a
a->b->c;{}!->[abc] # a, b, c serially dependent; multiple tests generated
# to test all permutations of a, b, c ordering linked
# to main program
(Above is just a short description of what the script can do, more
documentation is in the script comments.)
Two files containing several new tests, elf/dso-sort-tests-[12].def are added,
including test scenarios for BZ #15311 and Redhat issue #1162810 [1].
Due to the nature of dynamic loader tests, where the sorting behavior and test
output occurs before/after main(), generating testcases to use
support/test-driver.c does not suffice to control meaningful timeout for ld.so.
Therefore a new utility program 'support/test-run-command', based on
test-driver.c/support_test_main.c has been added. This does the same testcase
control, but for a program specified through a command-line rather than at the
source code level. This utility is used to run the dynamic loader testcases
generated by dso-ordering-test.py.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1162810
Signed-off-by: Chung-Lin Tang <cltang@codesourcery.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
GCC 4.9.0 added the alloc_align attribute to say that a function
argument specifies the alignment of the returned pointer. Clang supports
the attribute too. Using the attribute can allow a compiler to generate
better code if it knows the returned pointer has a minimum alignment.
See https://gcc.gnu.org/PR60092 for more details.
GCC implicitly knows the semantics of aligned_alloc and posix_memalign,
but not the obsolete memalign. As a result, GCC generates worse code
when memalign is used, compared to aligned_alloc. Clang knows about
aligned_alloc and memalign, but not posix_memalign.
This change adds a new __attribute_alloc_align__ macro to <sys/cdefs.h>
and then uses it on memalign (where it helps GCC) and aligned_alloc
(where GCC and Clang already know the semantics, but it doesn't hurt)
and xposix_memalign. It can't be used on posix_memalign because that
doesn't return a pointer (the allocated pointer is returned via a void**
parameter instead).
Unlike the alloc_size attribute, alloc_align only allows a single
argument. That means the new __attribute_alloc_align__ macro doesn't
really need to be used with double parentheses to protect a comma
between its arguments. For consistency with __attribute_alloc_size__
this patch defines it the same way, so that double parentheses are
required.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
I'd like to be able to test narrow and wide string interfaces, with
the narrow string tests using TEST_COMPARE_STRING and the wide string
tests using something analogous (possibly generated using macros from
a common test template for both the narrow and wide string tests where
appropriate).
Add such a TEST_COMPARE_STRING_WIDE, along with functions
support_quote_blob_wide and support_test_compare_string_wide that it
builds on. Those functions are built using macros from common
templates shared by the narrow and wide string implementations, though
I didn't do that for the tests of test functions. In
support_quote_blob_wide, I chose to use the \x{} delimited escape
sequence syntax proposed for C2X in N2785, rather than e.g. trying to
generate the end of a string and the start of a new string when
ambiguity would result from undelimited \x (when the next character
after such an escape sequence is valid hex) or forcing an escape
sequence to be used for the next character in the case of such
ambiguity.
Tested for x86_64.
The fd validity check in open_dev_null checks if fd > 0, which would
lead to a leaked fd if it is == 0.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some kernel versions (observed with kernel 5.14 and earlier) can list
"0" entries in /proc/self/task. This happens when a thread exits
while the task list is being constructed. Treat this entry as not
present, like the proposed kernel patch does:
[PATCH] procfs: Do not list TID 0 in /proc/<pid>/task
<https://lore.kernel.org/all/8735pn5dx7.fsf@oldenburg.str.redhat.com/>
Fixes commit 032d74eaf6 ("support: Add
support_wait_for_thread_exit").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
When testing nptl/tst-pthread-attr-affinity-fail fails with:
error: xsysconf.c:33: sysconf (83): Cannot allocate memory
error: 1 test failures
This happens as xsysconf checks the errno after running sysconf.
Internally the sysconf request for _SC_NPROCESSORS_CONF on linux
allocates memory. But there is a problem, even though malloc succeeds
errno is getting set to ENOMEM.
POSIX allows successful calls to clobber errno. So xsysconf just
checking errno is wrong. Fix xsysconf by only failing if we have an
error result and errno is set.
The recent change to use __KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64 to avoid
doing 64-bit checks on some platforms broke the test for hurd where
__KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64 is not defined. With error:
tst-itimer.c: In function 'do_test':
tst-itimer.c:103:11: error: '__KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64' undeclared (first use in this function)
103 | if (__KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tst-itimer.c:103:11: note: each undeclared identifier is reported only once for each function it appears in
Define a support helper to detect when setitimer and getitimer support
64-bit time_t.
Fixes commit 6e8a0aac2f ("time: Fix overflow itimer tests on 32-bit
systems").
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Joseph Myers <joseph@codesourcery.com>
It returns a range of file descriptor referring to the '/dev/null'
pathname. The function takes care of restarting the open range
if a file descriptor is found within the specified range and
also increases RLIMIT_NOFILE if required.
Checked on x86_64-linux-gnu.
If close() on infd and outfd succeeded, reset the fd numbers so that
we don't attempt to close them again.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
The benchmark and tests must fail in case of allocation failure in the
implementation array. Also annotate the x* allocators in support.h so
that the compiler has more information about them.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Replace _SC_MINSIGSTKSZ with _SC_SIGSTKSZ since sysconf (_SC_MINSIGSTKSZ)
returns the minimum number of bytes of free stack space required in order
to guarantee successful, non-nested handling of a single signal whose
handler is an empty function while sysconf (_SC_SIGSTKSZ) returns the
suggested minimum number of bytes of stack space required for a signal
stack.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Replace MINSIGSTKSZ with sysconf (_SC_MINSIGSTKSZ) since the constant
MINSIGSTKSZ used in glibc build may be too small.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The constant PTHREAD_STACK_MIN may be too small for some processors.
Rename _SC_SIGSTKSZ_SOURCE to _DYNAMIC_STACK_SIZE_SOURCE. When
_DYNAMIC_STACK_SIZE_SOURCE or _GNU_SOURCE are defined, define
PTHREAD_STACK_MIN to sysconf(_SC_THREAD_STACK_MIN) which is changed
to MIN (PTHREAD_STACK_MIN, sysconf(_SC_MINSIGSTKSZ)).
Consolidate <bits/local_lim.h> with <bits/pthread_stack_min.h> to
provide a constant target specific PTHREAD_STACK_MIN value.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The code to allocate a stack from xsigstack is refactored so it can
be more generic. The new support_stack_alloc() also set PROT_EXEC
if DEFAULT_STACK_PERMS has PF_X. This is required on some
architectures (hppa for instance) and trying to access the rtld
global from testsuite will require more intrusive refactoring
in the ldsodefs.h header.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also ran
tst-xsigstack on both hppa and ia64.
It is a wrapper for Linux clone syscall, to simplify the call to the
use only the most common arguments and remove architecture specific
handling (such as ia64 different name and signature).
It is a simple wrapper over timer_create, timer_settime, and
sigaction. It will be used to check for large timeout to trigger an
EINTR and to avoid use a large timeout (as for alarm()).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
The patch adds redirections for xstat, xlstat, and xfstat when
_TIME_BITS=64 is defined.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The patch adds redirections for xclock_gettime, xclock_settime,
timespec_add, timespec_sub, test_timespec_before_impl,
test_timespec_equal_or_after_impl, support_timespec_ns,
support_timespec_normalize, and support_timespec_check_in_range when
_TIME_BITS=64 is defined.
Co-authored-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Carlos O'Donell <carlos@redhat.com>
support_stat_nanoseconds cannot restore the ctime time, and
this may lead to sporadic test failures. Therefore, probe for
nanoseconds support before the initial statx call.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add a new function support_capture_subprogram_self_sgid that spawns an
sgid child of the running program with its own image and returns the
exit code of the child process. This functionality is used by at
least three tests in the testsuite at the moment, so it makes sense to
consolidate.
There is also a new function support_subprogram_wait which should
provide simple system() like functionality that does not set up file
actions. This is useful in cases where only the return code of the
spawned subprocess is interesting.
This patch also ports tst-secure-getenv to this new function. A
subsequent patch will port other tests. This also brings an important
change to tst-secure-getenv behaviour. Now instead of succeeding, the
test fails as UNSUPPORTED if it is unable to spawn a setgid child,
which is how it should have been in the first place.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Now that non-LFS stat function is implemented on to on LFS, it will
use statx when available. It allows to check for nanosecond timestamp
if the kernel supports __NR_statx.
Checked on s390-linux-gnu with 4.12.14 kernel.
Both new tests io/tst-stat and io/tst-stat-lfs (_FILE_OFFSET_BITS=64)
are comparing the nanosecond fields with the statx result. Unfortunately
on s390(31bit) those fields are always zero if old KABI with non-LFS
support is used. With _FILE_OFFSET_BITS=64 stat is using statx internally.
As suggested by Adhemerval this patch disables the nanosecond check for
s390(31bit).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some Linux filesystems might not fully support 64 bit timestamps [1],
which make some Linux specific tests to fail when they check for the
functionality.
This patch adds a new libsupport function, support_path_support_time64,
that returns whether the target file supports or not 64 bit timestamps.
The support is checked by issuing a utimensat and verifying both the
last access and last modification time against a statx call.
The tests that might fail are also adjusted to check the file support
as well:
$ dd if=/dev/zero of=loopbackfile.img bs=100M count=1
1+0 records in
1+0 records out
104857600 bytes (105 MB, 100 MiB) copied, 0,0589568 s, 1,8 GB/s
$ sudo losetup -fP loopbackfile.img
$ mkfs.xfs loopbackfile.img
meta-data=loopbackfile.img isize=512 agcount=4, agsize=6400 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1
data = bsize=4096 blocks=25600, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=1368, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
$ mkdir loopfs
$ sudo mount -o loop /dev/loop0 loopfs/
$ sudo chown -R azanella:azanella loopfs
$ TMPDIR=loopfs/ ./testrun.sh misc/tst-utimes
error: ../sysdeps/unix/sysv/linux/tst-utimes.c:55: File loopfs//utimesfECsK1 does not support 64-bit timestamps
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1795576
There's a small chance that a fresh checkout will result in some of
the test-specific container files will have the same timestamp and
size, which breaks the rsync logic in test-container, resulting in
tests running with the wrong support files.
This patch changes the rsync logic to always copy the test-specific
files, which normally would always be copied anyway. The rsync logic
for the testroot itself is unchanged.
The xclock_settime is a wrapper function on the clock_settime syscall
to be used in the test code.
It checks if the GLIBC_TEST_ALLOW_TIME_SETTING env variable is defined
in the environment in which test is executed. If it is not - the test
ends as unsupported. Otherwise, the clock-settime is executed and return
value is assessed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For configurations with cross-compiling equal to 'maybe' or 'no',
ldconfig will not run and thus the ld.so.cache will not be created
on the container testroot.pristine.
This lead to failures on both tst-glibc-hwcaps-prepend-cache and
tst-ldconfig-ld_so_conf-update on environments where the same
compiler can be used to build different ABIs (powerpc and x86 for
instance).
This patch addas a new test-container hook, ldconfig.run, that
triggers a ldconfig execution prior the test execution.
Checked on x86_64-linux-gnu and i686-linux-gnu.
POSIX states that system returned code for failure to execute the shell
shall be as if the shell had terminated using _exit(127). This
behaviour was removed with 5fb7fc9635.
Checked on x86_64-linux-gnu.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Tests such as posix/tst-waitid.c make heavy use of
support_process_state_wait, and thus on non-Linux where it falls back
to sleeping, a 2s sleep makes such test time out, while 1s remains
fine enough.
commit 04deeaa9ea
Author: Lucas A. M. Magalhaes <lamm@linux.ibm.com>
Date: Fri Jul 10 19:41:06 2020 -0300
Fix time/tst-cpuclock1 intermitent failures
has 2 issues:
1. It assumes time_t == long which is false on x32.
2. tst-timespec.c is compiled without -fexcess-precision=standard which
generates incorrect results on i686 in support_timespec_check_in_range:
double ratio = (double)observed_norm / expected_norm;
return (lower_bound <= ratio && ratio <= upper_bound);
This patch does
1. Compile tst-timespec.c with -fexcess-precision=standard.
2. Replace long with time_t.
3. Replace LONG_MIN and LONG_MAX with TYPE_MINIMUM (time_t) and
TYPE_MAXIMUM (time_t).
This test fails intermittently in systems with heavy load as
CLOCK_PROCESS_CPUTIME_ID is subject to scheduler pressure. Thus the
test boundaries were relaxed to keep it from failing on such systems.
A refactor of the spent time checking was made with some support
functions. With the advantage to representing time jitter in percent
of the target.
The values used by the test boundaries are all empirical.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
When detecting hole support, we write at 16MiB, and filesystems will
typically need two levels of data to record that. On filesystems with
8KB block, the two indirection blocks will require a total of 16KB
overhead, thus 32 512-byte sectors.
Spotted on GNU/Hurd with a 4KB blocks filesystem, but also happens on Linux
with 4KB or 8KB blocks filesystems.
* support/support_descriptor_supports_holes.c
(support_descriptor_supports_holes): Set block_headroom to 32.
In test-conainer we should set errno to 0 before calling strtol,
and check after with TEST_COMPARE.
In tst-support_capture_subprocess we should set errno to 0 before
checking it after the call to strtol.
Tested on x86_64.
Reviewed-by: DJ Delorie <dj@redhat.com>
Expand the support infrastructure:
- Create $(complocaledir) in the testroot.pristine to support localedef.
- Add the variable $complocaledir to script support.
- Add the script command 'mkdirp'.
All localedef tests which run with default paths need to have the
$(complocaledir) created in testroot.pristine. The localedef binary
will not by itself create the default path, but it will write into
the path. By adding this we can simplify the localedef tests.
The variable $complocaledir is the value of the configured
$(complocaledir) which is the location of the compiled locales that
will be searched by the runtime by default.
The command mkdirp will be available in script setup and will
be equivalent to running `mkdir -p`.
The variable and command can be used to write more complex tests.
Reviewed-by: DJ Delorie <dj@redhat.com>
During testing of localedef running in a minimal container
there were several error cases which were hard to diagnose
since they appeared as strerror (errno) values printed by the
higher level functions. This change adds three new verbose
messages for potential failure paths. The new messages give
the user the opportunity to use -v and display additional
information about why localedef might be failing. I found
these messages useful myself while writing a localedef
container test for --no-hard-links.
Since the changes cleanup the code that handle codeset
normalization we add tst-localedef-path-norm which contains
many sub-tests to verify the correct expected normalization of
codeset strings both when installing to default paths (the
only time normalization is enabled) and installing to absolute
paths. During the refactoring I created at least one
buffer-overflow which valgrind caught, but these tests did not
catch because the exec in the container had a very clean heap
with zero-initialized memory. However, between valgrind and
the tests the results are clean.
The new tst-localedef-path-norm passes without regression on
x86_64.
Change-Id: I28b9f680711ff00252a2cb15625b774cc58ecb9d
The advantage is that the buffer will always contain the number
of characters as returned from the function, which allows one to use
a sequence like
/* No more audit module output. */
line_length = xgetline (&buffer, &buffer_length, fp);
TEST_COMPARE_BLOB ("", 0, buffer, line_length);
to check for an expected EOF, while also reporting any unexpected
extra data encountered.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I'm debugging a situation where lots of tests using test-container fail
and it's possible knowing errno would help understand why.
Reviewed-by: DJ Delorie <dj@redhat.com>
It allows parent process to wait for child state using a polling
strategy over procfs on Linux. The polling is used over ptrace to
avoid the need to handle signals on the target pid and to handle some
system specific limitation (such as YAMA).
The polling has some limitations, such as resource consumption due
the procfs read in a loop and the lack of synchronization after the
state is obtained.
The interface idea is to simplify some sleep synchronization waitid
tests and is to reduce timeouts by replacing arbitrary waits.
exec <path_to_test_binary> [optional_argv_0]
copies test binary to specified location and runs it from
there. If the second argument is provided, that will
be used for argv[0]
cwd <directory>
attempts to chdir(directory) before running test
Note: "cwd" not "cd" as it takes effect just before the
test binary runs, not when it's encountered in the script,
so it can't be used as a path shortcut like "cd" would imply.
cleanup: use xstrdup() instead of strdup()
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This introduces a concept of trusted name servers, for which the
AD bit is passed through to applications. For untrusted name
servers (the default), the AD bit in responses are cleared, to
provide a safe default.
This approach is very similar to the one suggested by Pavel Šimerda
in <https://bugzilla.redhat.com/show_bug.cgi?id=1164339#c15>.
The DNS test framework in support/ is enhanced with support for
setting the AD bit in responses.
Tested on x86_64-linux-gnu.
Change-Id: Ibfe0f7c73ea221c35979842c5c3b6ed486495ccc
PTHREAD_STACK_MIN comes from <limits.h>, so include it explicitly.
However, it is not defined on Hurd, so compensate for that as well.
Built on x86_64-linux-gnu, i686-linux-gnu, i686-gnu.
Change-Id: Ifacc888ef86731c2639721b0932ae59583bd6b3e
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Since gettimeofday will shortly be implemented in terms of
clock_gettime on all platforms, internal code should use clock_gettime
directly; in addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday. (We can't
quite do that yet, but it'll be coming later in this patch series.)
In many cases, the changed code does fewer conversions.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
cannot fail. Most of the call sites were assuming gettimeofday could
not fail, but a few places were checking for errors. POSIX says
clock_gettime can only fail if the clock constant is invalid or
unsupported, and CLOCK_REALTIME is the one and only clock constant
that's required to be supported. For consistency I grepped the entire
source tree for any other places that checked for errors from
__clock_gettime (CLOCK_REALTIME), found one, and changed it too.
(For the record, POSIX also says gettimeofday can never fail.)
(It would be nice if we could declare that GNU systems will always
support CLOCK_MONOTONIC as well as CLOCK_REALTIME; there are several
places where we are using CLOCK_REALTIME where _MONOTONIC would be
more appropriate, and/or trying to use _MONOTONIC and then falling
back to _REALTIME. But the Hurd doesn't support CLOCK_MONOTONIC yet,
and it looks like adding it would involve substantial changes to
gnumach's internals and API. Oh well.)
A few Hurd-specific files were changed to use __host_get_time instead
of __clock_gettime, as this seemed tidier. We also assume this cannot
fail. Skimming the code in gnumach leads me to believe the only way
it could fail is if __mach_host_self also failed, and our
Hurd-specific code consistently assumes that can't happen, so I'm
going with that.
With the exception of support/support_test_main.c, test cases are not
modified, mainly because I didn't want to have to figure out which
test cases were testing gettimeofday specifically.
The definition of GETTIME in sysdeps/generic/memusage.h had a typo and
was not reading tv_sec at all. I fixed this. It appears nobody has been
generating malloc traces on a machine that doesn't have a superseding
definition.
There are a whole bunch of places where the code could be simplified
by factoring out timespec subtraction and/or comparison logic, but I
want to keep this patch as mechanical as possible.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
If WAIT_FOR_DEBUGGER is set to a non-zero value in the environment,
any test that runs will print some useful gdb information and wait
for gdb to attach to it and clear the "wait_for_debugger" variable.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
On i686-gnu the build is broken:
In file included from support_ptrace.c:22:
../include/sys/prctl.h:2:15: fatal error: sys/prctl.h: No such file or directory
#include_next <sys/prctl.h>
This patch just removes the unused prctl.h inclusion.
ChangeLog:
* support/support_ptrace.c: Remove inclusion of sys/prctl.h.
The testcase forks a child process and runs pldd with PID of
this child. On systems where /proc/sys/kernel/yama/ptrace_scope
differs from zero, pldd will fail with
/usr/bin/pldd: cannot attach to process 3: Operation not permitted
This patch checks if ptrace_scope exists, is zero "classic ptrace permissions"
or one "restricted ptrace". If ptrace_scope exists and has a higher
restriction, then the test is marked as UNSUPPORTED.
The case "restricted ptrace" is handled by rearranging the processes involved
during the test. Now we have the following process tree:
-parent: do_test (performs output checks)
--subprocess 1: pldd_process (becomes pldd via execve)
---subprocess 2: target_process (ptraced via pldd)
ChangeLog:
* elf/tst-pldd.c (do_test): Add UNSUPPORTED check.
Rearrange subprocesses.
(pldd_process): New function.
* support/Makefile (libsupport-routines): Add support_ptrace.
* support/xptrace.h: New file.
* support/support_ptrace.c: Likewise.
nss_db allows for getpwent et al to be called without a set*ent,
but it only works once. After the last get*ent a set*ent is
required to restart, because the end*ent did not properly reset
the module. Resetting it to NULL allows for a proper restart.
If the database doesn't exist, however, end*ent erroniously called
munmap which set errno.
The test case runs "makedb" inside the testroot, so needs selinux
DSOs installed.
