This patch increases the value of SIGSTKSZ and MINSIGSTKSZ
for powerpc64 similar to the kernel commit
2f82ec19757f58549467db568c56e7dfff8af283 to allow
further expansion of the signal stack frame size.
The generic (sysdeps/unix/sysv/linux/generic/bits/typesizes.h) and
default (bits/typesizes.h) differs in two fields:
bits/typesizes.h Linux generic
__NLINK_T_TYPE __UWORD_TYPE __U32_TYPE
__BLKSIZE_T_TYPE __SLONGWORD_TYPE __S32_TYPE
Sinceit leads to different C++ mangling names, the default typesize.h
is copied for the requires archtiectures and the generic is make the
default Linux one.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Similar to ppoll, the poll.h header needs to redirect the poll call
to a proper fortified ppoll with 64 bit time_t support.
The implementation is straightforward, just need to add a similar
check as __poll_chk and call the 64 bit time_t ppoll version. The
debug fortify tests are also extended to cover 64 bit time_t for
affected ABIs.
Unfortunately it requires an aditional symbol, which makes backport
tricky. One possibility is to add a static inline version if compiler
supports is and call abort instead of __chk_fail, so fortified version
will call __poll64 in the end.
Another possibility is to just remove the fortify support for
_TIME_BITS=64.
Checked on i686-linux-gnu.
The old exception handling implementation used function interposition
to replace the dynamic loader implementation (no TLS support) with the
libc implementation (TLS support). This results in problems if the
link order between the dynamic loader and libc is reversed (bug 25486).
The new implementation moves the entire implementation of the
exception handling functions back into the dynamic loader, using
THREAD_GETMEM and THREAD_SETMEM for thread-local data support.
These depends on Hurd support for these macros, added in commit
b65a82e4e7 ("hurd: Add THREAD_GET/SETMEM/_NC").
One small obstacle is that the exception handling facilities are used
before the TCB has been set up, so a check is needed if the TCB is
available. If not, a regular global variable is used to store the
exception handling information.
Also rename dl-error.c to dl-catch.c, to avoid confusion with the
dlerror function.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Linux 6.0 adds a constant ADDRB, a termios c_cflag bit, to its
include/uapi/asm-generic/termbits-common.h.
Add it accordingly to glibc's bits/termios-c_cflag.h headers. As
other constants in these headers are generally in octal, I converted
the value to octal to match. As ADDRB isn't in a POSIX-reserved
namespace, I made it conditional on __USE_MISC.
Tested for x86_64.
This allows us to define a generic no-op version of PTR_MANGLE and
PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE
unconditionally in C sources, avoiding an unintended loss of hardening
due to missing include files or unlucky header inclusion ordering.
In i386 and x86_64, we can avoid a <tls.h> dependency in the C
code by using the computed constant from <tcb-offsets.h>. <sysdep.h>
no longer includes these definitions, so there is no cyclic dependency
anymore when computing the <tcb-offsets.h> constants.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The older libc versions are obsolete for over twenty years now.
This patch removes the special flags for libc5 and libc4 and assumes
that all libraries cached are libc6 compatible and use FLAG_ELF_LIBC6.
Checked with a build for all affected architectures.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The implementation is based on scalar Chacha20 with per-thread cache.
It uses getrandom or /dev/urandom as fallback to get the initial entropy,
and reseeds the internal state on every 16MB of consumed buffer.
To improve performance and lower memory consumption the per-thread cache
is allocated lazily on first arc4random functions call, and if the
memory allocation fails getentropy or /dev/urandom is used as fallback.
The cache is also cleared on thread exit iff it was initialized (so if
arc4random is not called it is not touched).
Although it is lock-free, arc4random is still not async-signal-safe
(the per thread state is not updated atomically).
The ChaCha20 implementation is based on RFC8439 [1], omitting the final
XOR of the keystream with the plaintext because the plaintext is a
stream of zeros. This strategy is similar to what OpenBSD arc4random
does.
The arc4random_uniform is based on previous work by Florian Weimer,
where the algorithm is based on Jérémie Lumbroso paper Optimal Discrete
Uniform Generation from Coin Flips, and Applications (2013) [2], who
credits Donald E. Knuth and Andrew C. Yao, The complexity of nonuniform
random number generation (1976), for solving the general case.
The main advantage of this method is the that the unit of randomness is not
the uniform random variable (uint32_t), but a random bit. It optimizes the
internal buffer sampling by initially consuming a 32-bit random variable
and then sampling byte per byte. Depending of the upper bound requested,
it might lead to better CPU utilization.
Checked on x86_64-linux-gnu, aarch64-linux, and powerpc64le-linux-gnu.
Co-authored-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
[1] https://datatracker.ietf.org/doc/html/rfc8439
[2] https://arxiv.org/pdf/1304.1916.pdf
This change provides implementations for the mbrtoc8 and c8rtomb
functions adopted for C++20 via WG21 P0482R6 and for C2X via WG14
N2653. It also provides the char8_t typedef from WG14 N2653.
The mbrtoc8 and c8rtomb functions are declared in uchar.h in C2X
mode or when the _GNU_SOURCE macro or C++20 __cpp_char8_t feature
test macro is defined.
The char8_t typedef is declared in uchar.h in C2X mode or when the
_GNU_SOURCE macro is defined and the C++20 __cpp_char8_t feature
test macro is not defined (if __cpp_char8_t is defined, then char8_t
is a builtin type).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It was added on Linux 5.12 (2a1867219c7b27f928e2545782b86daaf9ad50bd)
to allow change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (a07b20004793d8926f78d63eb5980559f7813404)
to return a O_PATH-opened file descriptor to an existing mountpoint.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (cf3cba4a429be43e5527a3f78859b1bfd9ebc5fb)
that can be used to pick an existing mountpoint into an filesystem
context which can thereafter be used to reconfigure a superblock
with fsconfig syscall.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (ecdab150fddb42fe6a739335257949220033b782)
as a way to a configure filesystem creation context and trigger
actions upon it, to be used in conjunction with fsopen, fspick and
fsmount.
The fsconfig_command commands are currently only defined as an enum,
so they can't be checked on tst-mount-consts.py with current test
support.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (2db154b3ea8e14b04fee23e3fdfd5e9d17fbc6ae)
as way t move a mount from one place to another and, in the next
commit, allow to attach an unattached mount tree.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on 5.2 (93766fbd2696c2c4453dd8e1070977e9cd4e6b6d) to
provide a way by which a filesystem opened with fsopen and configured
by a series of fsconfig calls can have a detached mount object
created for it.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (24dcb3d90a1f67fe08c68a004af37df059d74005)
to start the process of preparing to create a superblock that will
then be mountable, using an fd as a context handle.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Added in Linux 5.15 (884a7e5964e06ed93c7771c0d7cf19c09a8946f1), the new
syscalls allows a caller to free the memory of a dying target process.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.10 (ecb8ac8b1f146915aa6b96449b66dd48984caacc)
with the same functionality as madvise but using a pidfd of the target
process.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.1(3eb39f47934f9d5a3027fe00d906a45fe3a15fad)
as a way to avoid the race condition of using kill (where PID might be
reused by the kernel between between obtaining the pid and sending the
signal).
If the siginfo_t argument is NULL then pidfd_send_signal is equivalent
to kill. If it is not NULL pidfd_send_signal is equivalent to
rt_sigqueueinfo.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.6 (8649c322f75c96e7ced2fec201e123b2b073bf09)
as a way to retrieve a file descriptors for another process though
pidfd (created either with CLONE_PIDFD or pidfd_getfd). The
functionality is similar to recvmmsg SCM_RIGHTS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.3 (32fcb426ec001cb6d5a4a195091a8486ea77e2df)
as a way to retrieve a pid file descriptors for process that has not
been created CLONE_PIDFD (by usual fork/clone).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
start_addresses in sysdeps/powerpc/powerpc64/start.S is historical
baggage that should disappear. Until someone does that, relocating
stinfo->main by hand is one solution to the fact that the field may be
unrelocated at the time it is accessed. This is similar to what is
done for dynamic tags via the D_PTR macro. stinfo->init and
stinfo->fini are zero in both powerpc64/start.S and powerpc32/start.S,
so make it a little more obvious they are unused by passing NULLs to
LIBC_START_MAIN. The makefile change is needed to pick up
elf/dl-static-tls.h from dl-machine.h.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Linux 5.17 has one new syscall, set_mempolicy_home_node. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
And optimize it slightly.
This is commit 8c8510ab27 revised.
In _dl_aux_init in elf/dl-support.c, use an explicit loop
and -fno-tree-loop-distribute-patterns to avoid memset.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
This reverts commit 8c8510ab27. The
revert is not perfect because the commit included a bug fix for
_dl_sysdep_start with an empty argv, introduced in commit
2d47fa6862 ("Linux: Remove
DL_FIND_ARG_COMPONENTS"), and this bug fix is kept.
The revert is necessary because the reverted commit introduced an
early memset call on aarch64, which leads to crash due to lack of TCB
initialization.
And optimize it slightly.
The large switch statement in _dl_sysdep_start can be replaced with
a large array. This reduces source code and binary size. On
i686-linux-gnu:
Before:
text data bss dec hex filename
7791 12 0 7803 1e7b elf/dl-sysdep.os
After:
text data bss dec hex filename
7135 12 0 7147 1beb elf/dl-sysdep.os
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This matches the data size initial-exec relocations use on most
targets.
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The posix_spawnattr_tcsetpgrp_np works on a file descriptor (the
controlling terminal), so it would make more sense to actually fit
it on the file actions API.
Also, POSIX_SPAWN_TCSETPGROUP is not really required since it is
implicit by the presence of tcsetpgrp file action.
The posix/tst-spawn6.c is also fixed when TTY can is not present.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The glibc 2.34 release really should have added a GLIBC_2.34
symbol to the dynamic loader. With it, we could move functions such
as dlopen or pthread_key_create that work on process-global state
into the dynamic loader (once we have fixed a longstanding issue
with static linking). Without the GLIBC_2.34 symbol, yet another
new symbol version would be needed because old glibc will fail to
load binaries due to the missing symbol version in ld.so that newly
linked programs will require.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Currently there is no proper way to set the controlling terminal through
posix_spawn in race free manner [1]. This forces shell implementations
to keep using fork+exec when launching background process groups,
even when using posix_spawn yields better performance.
This patch adds a new GNU extension so the creating process can
configure the created process terminal group. This is done with a new
flag, POSIX_SPAWN_TCSETPGROUP, along with two new attribute functions:
posix_spawnattr_tcsetpgrp_np, and posix_spawnattr_tcgetpgrp_np.
The function sets a new attribute, spawn-tcgroupfd, that references to
the controlling terminal.
The controlling terminal is set after the spawn-pgroup attribute, and
uses the spawn-tcgroupfd along with current creating process group
(so it is composable with POSIX_SPAWN_SETPGROUP).
To create a process and set the controlling terminal, one can use the
following sequence:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
If the idea is also to create a new process groups:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP
| POSIX_SPAWN_SETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
posix_spawnattr_setpgroup (&attr, 0);
The controlling terminal file descriptor is ignored if the new flag is
not set.
This interface is slight different than the one provided by QNX [2],
which only provides the POSIX_SPAWN_TCSETPGROUP flag. The QNX
documentation does not specify how the controlling terminal is obtained
nor how it iteracts with POSIX_SPAWN_SETPGROUP. Since a glibc
implementation is library based, it is more straightforward and avoid
requires additional file descriptor operations to request the caller
to setup the controlling terminal file descriptor (and it also allows
a bit less error handling by posix_spawn).
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://github.com/ksh93/ksh/issues/79
[2] https://www.qnx.com/developers/docs/7.0.0/index.html#com.qnx.doc.neutrino.lib_ref/topic/p/posix_spawn.html
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It is similar to epoll_wait, with the difference the timeout has
nanosecond resoluting by using struct timespec instead of int.
Although Linux interface only provides 64 bit time_t support, old
32 bit interface is also provided (so keep in sync with current
practice and to no force opt-in on 64 bit time_t).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Linux 5.16 has one new syscall, futex_waitv. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
Commit a4b4131355 changed default __TIMESIZE to 64, however
it added sub-architecture timesize.h for powerpc, s390, and
sparc.
Also simplify mips by removing _MIPS_SIM usage (which would require
to add sgidefs inclusion.
It can be used to speed up the libgcc unwinder, and the internal
_dl_find_dso_for_object function (which is used for caller
identification in dlopen and related functions, and in dladdr).
_dl_find_object is in the internal namespace due to bug 28503.
If libgcc switches to _dl_find_object, this namespace issue will
be fixed. It is located in libc for two reasons: it is necessary
to forward the call to the static libc after static dlopen, and
there is a link ordering issue with -static-libgcc and libgcc_eh.a
because libc.so is not a linker script that includes ld.so in the
glibc build tree (so that GCC's internal -lc after libgcc_eh.a does
not pick up ld.so).
It is necessary to do the i386 customization in the
sysdeps/x86/bits/dl_find_object.h header shared with x86-64 because
otherwise, multilib installations are broken.
The implementation uses software transactional memory, as suggested
by Torvald Riegel. Two copies of the supporting data structures are
used, also achieving full async-signal-safety.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The syscall function does not allocate the extra stack frame for scv like other
assembly syscalls using DO_CALL_SCV. So after commit d120fb9941 changed the
offset that is used to save LR, syscall ended up using an invalid offset,
causing regressions on powerpc64. So make sure the extra stack frame is
allocated in syscall.S as well to make it consistent with other uses of
DO_CALL_SCV and avoid similar issues in the future.
Tested on powerpc, powerpc64, and powerpc64le (with and without scv)
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper with
SVID error handling around the new code. There is no new symbol version
nor compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
Only ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
The relationship between the thread pointer and the rseq area
is made explicit. The constant offset can be used by JIT compilers
to optimize rseq access (e.g., for really fast sched_getcpu).
Extensibility is provided through __rseq_size and __rseq_flags.
(In the future, the kernel could request a different rseq size
via the auxiliary vector.)
Co-Authored-By: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
