The fix for BZ #17273 introduced a single byte of memory corruption when
the line is entirely blank. It would walk back past the start of the
buffer if the heap happened to be 0x20 or 0x09 and then write a NUL byte.
buffer = '\n';
end_ptr = buffer;
while (end_ptr[-1] == ' ' || end_ptr[-1] == '\t')
end_ptr--;
*end_ptr = '\0';
Fix that and rework the tests. Adding the testcase for BZ #17273 to the
existing \040 parser does not really make sense as it's unrelated, and
leads to confusing behavior: it implicitly relies on the new entry being
longer than the previous entry (since it just rewinds the FILE*). Split
it out into its own dedicated testcase instead.
glibc's Makeconfig defines some variables such as $(libm) and $(libdl)
for linking with libraries built by glibc, and nptl/Makeconfig
(included by the toplevel Makeconfig) defines others such as
$(shared-thread-library).
In some places glibc's Makefiles use those variables when linking
against the relevant libraries, but in other places they hardcode the
location of the libraries in the build tree. This patch cleans up
various places to use the variables that already exist (in the case of
libm, replacing several duplicate definitions of a $(link-libm)
variable in subdirectory Makefiles). (It's not necessarily exactly
equivalent to what the existing code does - in particular,
$(shared-thread-library) includes libpthread_nonshared, but is
replacing places that just referred to libpthread.so. But I think
that change is desirable on the general principle of linking things as
close as possible to the way in which they would be linked with an
installed library, unless there is a clear reason not to do so.)
To support running tests with an installed copy of glibc without
needing the full build tree from when that copy was built, I think it
will be useful to use such variables more generally and systematically
- every time the rules for building a test refer to some file from the
build tree that's also installed by glibc, use a makefile variable so
that the installed-testing case can point those variables to installed
copies of the files. This patch just deals with straightforward cases
where such variables already exist.
It's quite possible some uses of $(shared-thread-library) should
actually be a new $(thread-library) variable that's set appropriately
in the --disable-shared case, if those uses would in fact work without
shared libraries. I didn't change the status quo that those cases
hardcode use of a shared library whether or not it's actually needed
(but other uses such as $(libm) and $(libdl) would now get the static
library if the shared library isn't built, when some previously
hardcoded use of the shared library - if they actually need shared
libraries, the test itself needs an enable-shared conditional anyway).
Tested x86_64.
* benchtests/Makefile
($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm),
not $(common-objpfx)math/libm.so.
($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on
$(shared-thread-library), not $(common-objpfx)nptl/libpthread.so.
* elf/Makefile ($(objpfx)noload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
($(objpfx)tst-audit8): Depend on $(libm), not
$(common-objpfx)math/libm.so.
* malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl),
not $(common-objpfx)dlfcn/libdl.so.
* math/Makefile
($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))):
Depend on $(libm), not $(objpfx)libm.so. Do not condition on
[$(build-shared) = yes].
($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not
$(common-objpfx)nptl/libpthread.so.
* misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not
$(common-objpfx)math/libm.so$(libm.so-version) or
$(common-objpfx)math/libm.a depending on [$(build-shared) = yes].
* nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
* setjmp/Makefile (link-libm): Remove variable.
($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm).
* stdio-common/Makefile (link-libm): Remove variable.
($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm).
* stdlib/Makefile (link-libm): Remove variable.
($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm).
($(objpfx)tst-strtod-round): Likewise.
($(objpfx)tst-tininess): Likewise.
($(objpfx)tst-strtod-underflow): Likewise.
($(objpfx)tst-strtod6): Likewise.
($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and
$(libdl), not $(common-objpfx)nptl/libpthread.so and
$(common-objpfx)dlfcn/libdl.so.
This patch systematically renames miscellaneous tests so their outputs
use a *.out name (unless the test is just running some glibc program
with its conventional output file name, rather than a special program
at all, as in catgets tests generating *.cat). In the case of the
iconv test test-iconvconfig, output is redirected where it wasn't
before.
In various places the "generated" variable is updated to reflect the
revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading)
is also fixed. resolv/Makefile sets both "generate" (which appears
unused) and "generated". Bitrot in the settings of these variables
could no doubt be fixed so that "make clean" after build and testing
leaves results the same as after configure (and indeed the
tests-special / xtests-special variables could be used to simplify
things, by removing those files automatically rather than listing them
manually in these variables), and "make distclean" leaves an empty
build directory, but right now it appears various files don't get
deleted. I think they are liable to continue to bitrot in the absence
of routine testing that these targets actually work, given that
building in the source directory isn't supported and that was the main
use of such makefile targets.
Tested x86_64.
* elf/Makefile (tests-special): Rename tests to end with .out.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem.out): Likewise.
* iconv/Makefile (xtests-special): Change test-iconvconfig to
$(objpfx)test-iconvconfig.out.
(test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use
set -e inside subshell and redirect output to file.
* iconvdata/Makefile (generated): Rename tests to end with .out.
Correct type.
(tests-special): Rename tests to end with .out.
($(objpfx)mtrace-tst-loading): Likewise.
* intl/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)mtrace-tst-gettext): Likewise.
* misc/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)tst-error1-mem): Likewise.
* nptl/Makefile (tests-special): Likewise.
($(objpfx)tst-stack3-mem): Likewise.
(generated): Likewise.
* posix/Makefile (generated): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile (generate): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
(generated): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
localedata:
* Makefile (generated): Rename tests to end with .out.
(tests-special): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
* misc/Versions: Export preadv, preadv64, pwritev, pwritev64 for
GLIBC_2.10.
* misc/sys/uio.h: Declare preadv, preadv64, pwritev, pwritev64.
* sysdeps/unix/sysv/linux/kernel-features.h: Add entries for preadv
and pwritev.
* misc/preadv.c: New file.
* misc/preadv64.c: New file.
* misc/pwritev.c: New file.
* misc/pwritev64.c: New file.
* sysdeps/posx/preadv.c: New file.
* sysdeps/posx/preadv64.c: New file.
* sysdeps/posx/pwritev.c: New file.
* sysdeps/posx/pwritev64.c: New file.
* sysdeps/unix/sysv/linux/preadv.c: New file.
* sysdeps/unix/sysv/linux/preadv64.c: New file.
* sysdeps/unix/sysv/linux/pwritev.c: New file.
* sysdeps/unix/sysv/linux/pwritev64.c: New file.
* sysdeps/unix/sysv/linux/wordsize-64/preadv64.c: New file.
* sysdeps/unix/sysv/linux/wordsize-64/pwritev64.c: New file.
2009-01-23 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/tst-clone.c (do_test): Avoid warning.
* misc/hsearch_r.c (hcreate_r): We need at least three elements in
the hash table.
* misc/Makefile (tests): Add bug-hsearch1.
* misc/bug-hsearch1.c: New file.
* sysdeps/unix/sysv/linux/i386/fchownat.c: Diddle code so that "fail"
label is always used.
[BZ #2172]
* bits/syslog-path.h: New file.
* misc/Makefile (headers): Add it.
* misc/sys/syslog.h: Include it.
(_PATH_LOG): Macro removed.
From Robert Millan <robertmh@gnu.org>.
system call code to be redefined in macro CALL_PSELECT6.
* sysdeps/unix/sysv/linux/i386/Makefile [subdir=misc]
(sysdep_routines): Add call_pselect6.
* sysdeps/unix/sysv/linux/i386/call_pselect6.c: New file.
* sysdeps/unix/sysv/linux/i386/pselect.c: New file.
* misc/Makefile (tests): Add tst-pselect.
* misc/tst-pselect.c: New file.
* sysdeps/unix/sysv/linux/pselect.c: Fix typo in declaration.
* sysdeps/unix/sysv/linux/xmknodat.c (__xmknodat): Cast k_dev
value to unsigned int to match kernel.
prototype.
(nexttowardf): Redirect to __nldbl_nexttowardf.
(nexttoward): Redirect to nextafter.
(__MATHDECL_2, __MATHDECL_1): Redirect *l functions to
non-*l versions if __LONG_DOUBLE_MATH_OPTIONAL and
__NO_LONG_DOUBLE_MATH.
* math/complex.h (__MATHDECL_1): Likewise.
* math/bits/mathcalls.h (nexttoward): Don't prototype if
__LDBL_COMPAT.
* misc/sys/cdefs.h: Include <bits/wordsize.h>.
(__LDBL_COMPAT, __LDBL_REDIR1, __LDBL_REDIR, __LDBL_REDIR1_NTH,
__LDBL_REDIR_NTH, __LDBL_REDIR_DECL): New macros.
* libio/bits/stdio-ldbl.h: New file.
* libio/Makefile (headers): Add it.
* libio/stdio.h [__LDBL_COMPAT]: #include it.
* libio/bits/libio-ldbl.h: New file.
* libio/Makefile (headers): Add it.
* libio/libio.h [__LDBL_COMPAT]: #include it.
* libio/libioP.h: Include <math_ldbl_opt.h>.
* include/wchar.h (__fwprintf, __vfwprintf): Fix commented out
attribute.
(__vfwprintf_chk): New prototype. Add libc_hidden_proto.
* wcsmbs/bits/wchar-ldbl.h: New file.
* wcsmbs/Makefile (headers): Add it.
* wcsmbs/wchar.h [__LDBL_COMPAT]: #include it.
* wcsmbs/bits/wchar2.h (__vswprintf_alias): Removed.
(vswprintf): Define as a macro rather than inline function.
* stdio-common/bits/printf-ldbl.h: New file.
* stdio-common/Makefile (headers): Add it.
* stdio-common/printf.h [__LDBL_COMPAT]: #include it.
* libio/fwprintf.c: Include libioP.h.
(fwprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/fwscanf.c: Include libioP.h.
(fwscanf): Rename to __fwscanf and add ldbl_strong_alias.
* libio/iovdprintf.c (vdprintf): Use ldbl_weak_alias instead of
weak_alias.
* libio/iovsprintf.c (_IO_vsprintf): Rename to __IO_vsprintf,
add ldbl_strong_alias and use INTDEF2 instead of INTDEF.
(vsprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/iovsscanf.c (__vsscanf, vsscanf): Use ldbl_weak_alias
instead of weak_alias.
* libio/iovswscanf.c (vswscanf): Rename to __vswscanf,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* libio/obprintf.c (obstack_printf, obstack_vprintf): Use
ldbl_weak_alias instead of weak_alias.
* libio/swprintf.c: Include libioP.h.
(swprintf): Rename to __swprintf and add ldbl_strong_alias.
* libio/swscanf.c: Include libioP.h.
(swscanf): Rename to __swscanf and add ldbl_strong_alias.
* libio/vasprintf.c (vasprintf): Use ldbl_weak_alias instead of
weak_alias.
* libio/vscanf.c (vscanf): Use ldbl_weak_alias instead of
weak_alias.
* libio/vsnprintf.c (__vsnprintf, vsnprintf): Use ldbl_weak_alias
instead of weak_alias.
* libio/vswprintf.c (__vswprintf): Remove alias.
(vswprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/vwprintf.c: Include libioP.h.
(vwprintf): Rename to __vwprintf and add ldbl_strong_alias.
* libio/vwscanf.c (vwscanf): Rename to __vwscanf and add
ldbl_strong_alias.
* libio/wprintf.c: Include libioP.h.
(wprintf): Rename to __wprintf and add ldbl_strong_alias.
* libio/wscanf.c: Include libioP.h.
(wscanf): Rename to __wscanf and add ldbl_strong_alias.
* stdio-common/asprintf.c (__asprintf): Rename to ___asprintf, add
ldbl_strong_alias and use INTDEF2 instead of INTDEF.
(asprintf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/dprintf.c (dprintf): Rename to __dprintf, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdio-common/fprintf.c: Include libioP.h.
(fprintf): Rename to __fprintf, add ldbl_strong_alias and
use ldbl_hidden_def instead of libc_hidden_def.
(_IO_fprintf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/fscanf.c: Include libioP.h.
(fscanf): Rename to __fscanf and add ldbl_strong_alias.
* stdio-common/printf.c: Include libioP.h.
(printf): Rename to __printf and add ldbl_strong_alias.
(_IO_printf): Use ldbl_strong_alias instead of strong_alias.
* stdio-common/printf_fp.c (__printf_fp): Rename to __printf_fp, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdio-common/printf_size.c (printf_size): Rename to __printf_size
and add ldbl_strong_alias.
* stdio-common/scanf.c (scanf): Rename to __scanf and add
ldbl_strong_alias.
* stdio-common/snprintf.c (snprintf): Use ldbl_weak_alias instead of
weak_alias.
* stdio-common/sprintf.c (sprintf): Rename to __sprintf, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
(_IO_sprintf): Use ldbl_strong_alias instead of strong_alias.
* stdio-common/sscanf.c: Include libioP.h instead of iolibio.h.
(sscanf): Rename to __sscanf and add ldbl_strong_alias.
* stdio-common/vfprintf.c (vfprintf): Define to
_IO_vfprintf_internal. Use ldbl_strong_alias instead. Use
ldbl_hidden_def instead of libc_hidden_def.
(_IO_vfprintf_internal): Clear is_long_double if __ldbl_is_dbl,
handle the argument as double if it is non-zero.
(vfwprintf): Use ldbl_weak_alias instead of weak_alias.
(_IO_vfprintf): Add ldbl_strong_alias.
* stdio-common/vfscanf.c (_IO_vfscanf): Rename to
_IO_vfscanf_internal, don't use strtold if __ldbl_is_dbl, add
ldbl_strong_alias.
(vfwscanf): Use ldbl_weak_alias instead of weak_alias.
(__vfscanf): Rename to ___vfscanf, add ldbl_strong_alias and
use ldbl_hidden_def instead of libc_hidden_def.
(vfscanf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/vprintf.c: Include libioP.h.
(vprintf): Rename to __vprintf and add ldbl_strong_alias.
* debug/fprintf_chk.c (__fprintf_chk): Rename to ___fprintf_chk
and add ldbl_strong_alias.
* debug/printf_chk.c (__printf_chk): Rename to ___printf_chk
and add ldbl_strong_alias.
* debug/snprintf_chk.c: Include libioP.h.
(__snprintf_chk): Rename to ___snprintf_chk and add ldbl_strong_alias.
* debug/sprintf_chk.c: Include libioP.h.
(__sprintf_chk): Rename to ___sprintf_chk and add ldbl_strong_alias.
* debug/vfprintf_chk.c (__vfprintf_chk): Rename to ___vfprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* debug/vfwprintf_chk.c (__vfwprintf_chk): Add libc_hidden_def.
* debug/vprintf_chk.c (__vprintf_chk): Rename to ___vprintf_chk
and add ldbl_strong_alias.
* debug/vsnprintf_chk.c (__vsnprintf_chk): Rename to ___vsnprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* debug/vsprintf_chk.c (__vsprintf_chk): Rename to ___vsprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdlib/stdlib.h (strtold): Don't define inline if [!__LDBL_COMPAT].
* wcsmbs/wchar.h (wcstold): Likewise.
* stdlib/strtod_l.c: Include math_ldbl_opt.h.
(____STRTOF_INTERNAL): Define.
(INTERNAL (__STRTOF)): Rename to ____STRTOF_INTERNAL.
(__STRTOF): Call ____STRTOF_INTERNAL instead.
[LONG_DOUBLE_COMPAT] (strtold_l, wcstold_l, __strtold_l, __wcstold_l):
Add compatibility symbols.
* stdlib/strtod.c: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (strtold, wcstold, __strtold_internal,
__wcstold_internal): Add compatibility symbols.
* stdlib/strtold.c: Include bits/wordsize.h, wchar.h.
(NEW, NEW1): Define.
(__new_strtold, __new_wcstold): New prototypes.
(____new_strtold_internal, ____new_wcstold_internal): Likewise.
Add libc_hidden_proto.
(STRTOF): Define to NEW (*told).
[__LONG_DOUBLE_MATH_OPTIONAL] (wcstold, strtold): Add
long_double_symbol.
[__LONG_DOUBLE_MATH_OPTIONAL] (__wcstold_internal,
__strtold_internal): Likewise. Add libc_hidden_ver.
* stdlib/bits/stdlib-ldbl.h: New file.
* stdlib/Makefile (headers): Add it.
* stdlib/stdlib.h [__LDBL_COMPAT]: #include it.
* include/stdlib.h (ecvt_r, fcvt_r, qecvt_r, qfcvt_r): Remove
libc_hidden_proto.
(__ecvt, __fcvt, __gcvt, __ecvt_r, __fcvt_r, __qecvt, __qfcvt,
__qgcvt, __qecvt_r, __qfcvt_r): New prototypes.
* misc/efgcvt_r.c: Include shlib-compat.h.
(LONG_DOUBLE_CVT): Define.
(__APPEND, __APPEND2): Define.
(*fcvt_r): Use __APPEND instead of APPEND. Remove libc_hidden_def.
(*ecvt_r): Likewise.
(cvt_symbol): Define. Use it on fcvt_r and ecvt_r.
* misc/efgcvt.c: Include shlib-compat.h.
(LONG_DOUBLE_CVT): Define.
(__APPEND, __APPEND2): Define.
(fcvt): Use __APPEND instead of APPEND. Remove libc_hidden_def.
(ecvt, gcvt): Likewise.
(cvt_symbol): Define. Use it on fcvt, ecvt and gcvt.
* stdlib/bits/monetary-ldbl.h: New file.
* stdlib/Makefile (headers): Add it.
* stdlib/monetary.h [__LDBL_COMPAT]: #include it.
* stdlib/strfmon.c: Include math_ldbl_opt.h.
(strfmon): Rename to __strfmon and add ldbl_strong_alias.
* stdlib/strfmon_l.c: Remove all traces of [!USE_IN_LIBIO].
(__vstrfmon_l): Don't set is_long_double if __ldbl_is_dbl.
(__strfmon_l): Rename to ___strfmon_l and add ldbl_strong_alias.
(strfmon_l): Use ldbl_weak_alias instead of weak_alias.
* misc/bits/syslog-ldbl.h: New file.
* misc/Makefile (headers): Add it.
* misc/sys/syslog.h [__LDBL_COMPAT]: #include it.
* misc/syslog.c: Include math_ldbl_opt.h.
(syslog): Rename to __syslog and add ldbl_strong_alias,
use ldbl_hidden_def instead of libc_hidden_def.
(vsyslog): Rename to __vsyslog and add ldbl_strong_alias,
use ldbl_hidden_def instead of libc_hidden_def.
* sysdeps/generic/math_ldbl_opt.h: New file.
* math/w_j1l.c (j1l, y1l): Rename to __ prefixed variants.
Add weak_alias.
* math/w_j0l.c (j0l, y0l): Likewise.
* math/w_jnl.c (jnl, ynl): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c
(__nexttowardl): Remove strong_alias.
(nexttowardl): Remove weak_alias.
* sysdeps/ieee754/ldbl-96/s_erfl.c
(__erfl, __erfcl): Remove strong_alias.
(erfl, erfcl): Remove weak_alias.
* sysdeps/ieee754/ldbl-64-128/s_asinhl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_atanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_cbrtl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_ceill.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_copysignl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_cosl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_erfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_expm1l.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_fabsl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_finitel.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_floorl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_fpclassifyl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_frexpl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_ilogbl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_isinfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_isnanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_llrintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_llroundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_log1pl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_logbl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_lrintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_lroundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_modfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nearbyintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nextafterl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttoward.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttowardfd.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_remquol.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_rintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_roundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_scalblnl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_signbitl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_sincosl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_sinl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_tanhl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_tanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_truncl.c: New file.
* sysdeps/ieee754/ldbl-64-128/strtold_l.c: New file.
* sysdeps/ieee754/ldbl-64-128/w_expl.c: New file.
* sysdeps/ieee754/ldbl-opt/configure.in: New file.
* sysdeps/ieee754/ldbl-opt/configure: New file.
* sysdeps/ieee754/ldbl-opt/Makefile: New file.
* sysdeps/ieee754/ldbl-opt/Versions: New file.
* sysdeps/ieee754/ldbl-opt/cabs.c: New file.
* sysdeps/ieee754/ldbl-opt/cabsl.c: New file.
* sysdeps/ieee754/ldbl-opt/carg.c: New file.
* sysdeps/ieee754/ldbl-opt/cargl.c: New file.
* sysdeps/ieee754/ldbl-opt/cimag.c: New file.
* sysdeps/ieee754/ldbl-opt/cimagl.c: New file.
* sysdeps/ieee754/ldbl-opt/conj.c: New file.
* sysdeps/ieee754/ldbl-opt/conjl.c: New file.
* sysdeps/ieee754/ldbl-opt/creal.c: New file.
* sysdeps/ieee754/ldbl-opt/creall.c: New file.
* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.c: New file.
* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.h: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-acos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-acosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atan2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cabs.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cacos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cacosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-carg.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-casin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-casinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-catan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-catanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cbrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ccos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ccosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ceil.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cimag.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-clog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-clog10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-conj.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-copysign.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cpow.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cproj.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-creal.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ctan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ctanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-dprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-drem.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-erf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-erfc.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-expm1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fabs.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fdim.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-finite.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-floor.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmax.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmod.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-frexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-gamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-hypot.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ilogb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-iovfscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-isinf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-isnan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-j0.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-j1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-jn.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ldexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lgamma_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-llrint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-llround.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log1p.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-logb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lrint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lround.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-modf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nearbyint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nextafter.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nexttoward.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-obstack_printf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-obstack_vprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-pow.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_fp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_size.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qecvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qecvt_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qfcvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qfcvt_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qgcvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-remainder.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-remquo.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-rint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-round.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalbln.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalbn.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-signbit.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-significand.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sincos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-snprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-snprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtold.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtoldint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-syslog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-syslog_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-trunc.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vasprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vdprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsyslog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsyslog_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstoldint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-y0.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-y1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-yn.c: New file.
* sysdeps/ieee754/ldbl-opt/s_asinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_atan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacosh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacosl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cbrt.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccosh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccosl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ceil.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cexpl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog10.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog10l.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clogl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_copysign.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cpow.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cpowl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cproj.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cprojl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csqrtl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_erf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_expm1.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fabs.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fdim.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fdiml.c: New file.
* sysdeps/ieee754/ldbl-opt/s_finite.c: New file.
* sysdeps/ieee754/ldbl-opt/s_floor.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fma.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmal.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmax.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmaxl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fminl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_frexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ilogb.c: New file.
* sysdeps/ieee754/ldbl-opt/s_isinf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_isnan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ldexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ldexpl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_llrint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_llround.c: New file.
* sysdeps/ieee754/ldbl-opt/s_log1p.c: New file.
* sysdeps/ieee754/ldbl-opt/s_logb.c: New file.
* sysdeps/ieee754/ldbl-opt/s_lrint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_lround.c: New file.
* sysdeps/ieee754/ldbl-opt/s_modf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nearbyint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nextafter.c: New file.
* sysdeps/ieee754/ldbl-opt/s_remquo.c: New file.
* sysdeps/ieee754/ldbl-opt/s_rint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_round.c: New file.
* sysdeps/ieee754/ldbl-opt/s_scalbln.c: New file.
* sysdeps/ieee754/ldbl-opt/s_scalbn.c: New file.
* sysdeps/ieee754/ldbl-opt/s_significand.c: New file.
* sysdeps/ieee754/ldbl-opt/s_significandl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_sin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_sincos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_tan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_tanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_trunc.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acos.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acosh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acosl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_asin.c: New file.
* sysdeps/ieee754/ldbl-opt/w_asinl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atan2.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atan2l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atanh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_cosh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_coshl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_drem.c: New file.
* sysdeps/ieee754/ldbl-opt/w_dreml.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp10.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp10l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_fmod.c: New file.
* sysdeps/ieee754/ldbl-opt/w_fmodl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_hypot.c: New file.
* sysdeps/ieee754/ldbl-opt/w_hypotl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j0.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j0l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j1.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j1l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_jn.c: New file.
* sysdeps/ieee754/ldbl-opt/w_jnl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgamma_r.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgammal.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgammal_r.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log10.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log10l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log2.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log2l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_logl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_pow.c: New file.
* sysdeps/ieee754/ldbl-opt/w_powl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_remainder.c: New file.
* sysdeps/ieee754/ldbl-opt/w_remainderl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_scalb.c: New file.
* sysdeps/ieee754/ldbl-opt/w_scalbl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sinh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sqrtl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_tgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/w_tgammal.c: New file.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/Implies: New file.
* sysdeps/sparc/sparc32/Implies: Move ldbl-128 first and flt-32
after dbl-64.
* sysdeps/unix/sysv/linux/sparc/sparc32/Versions (NLDBL_VERSION):
%define this to to GLIBC_2.4.
* sysdeps/sparc/sparc32/fpu/e_sqrtl.c: New file.
* sysdeps/sparc/sparc32/fpu/s_fabs.c: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsl.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoui.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_qtoux.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_qtox.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_uitoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_uxtoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_xtoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_lltoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoll.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtou.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoull.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_ulltoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_utoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/Versions: New file.
* sysdeps/sparc/fpu/bits/mathinline.h (__unordered_cmp,
__unordered_v9cmp): Define differently depending on
-m32 -mlong-double-{64,128}.
(__signbitl, sqrtl, __ieee754_sqrtl): New inlines.
* sysdeps/sparc/fpu/bits/mathdef.h (__NO_LONG_DOUBLE_MATH): Remove.
* sysdeps/sparc/sparc32/soft-fp/Makefile (sparc32-quad-routines):
Set.
(sysdep-routines): Add sparc32-quad-routines.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h: Include stdlib.h.
(FP_HANDLE_EXCEPTIONS): Call ___Q_simulate_exceptions as a normal
function.
* sysdeps/sparc/sparc32/soft-fp/q_sqrt.c (__ieee754_sqrtl): New
alias to _Q_sqrt.
* sysdeps/sparc/sparc32/soft-fp/q_div.c (_Q_div): Fix a typo.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h: Include stdlib.h.
* sysdeps/sparc/sparc32/fpu/libm-test-ulps: Update.
* libio/libio.h (_IO_vfscanf, _IO_vfprintf): Remove __THROW.
(_IO_vfwscanf, _IO_vfwprintf): Likewise.
* libio/libioP.h (_IO_vdprintf): Likewise.
fchownat, and unlinkat.
(static-only-routines): Add fstatat and fstatat64.
(tests): Add tst-unlinkat, tst-fstatat, tst-futimesat, tst-renameat,
and tst-fchownat.
* io/Versions [GLIBC_2.4]: Add fchownat, __fxstatat, __fxstatat64,
and unlinkat.
* io/fcntl.h: Define AT_FDCWD, AT_SYMLINK_NOFOLLOW, and AT_REMOVEDIR.
* io/fstatat.c: New file.
* io/fstatat64.c: New file.
* io/sys/stat.h: Declare fstatat, fstatat64, __fxstatat, __fxstatat64
and define fstatat and fstatat64 inline functions.
* libio/stdio.h: Declare renameat.
* misc/Makefile (routines): Add futimesat.
* misc/Versions [GLIBC_2.4]: Add futimesat.
* posix/unistd.h: Declare fchownat and unlinkat.
* stdio-common/Makefile (routines): Add renameat.
* stdio-common/Versions [GLIBC_2.4]: Add renameat.
* sysdeps/generic/fchownat.c: New file.
* sysdeps/generic/futimesat.c: New file.
* sysdeps/generic/fxstatat.c: New file.
* sysdeps/generic/fxstatat64.c: New file.
* sysdeps/generic/renameat.c: New file.
* sysdeps/generic/unlinkat.c: New file.
* sysdeps/unix/sysv/linux/fchownat.c: New file.
* sysdeps/unix/sysv/linux/futimesat.c: New file.
* sysdeps/unix/sysv/linux/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/fxstatat64.c: New file.
* sysdeps/unix/sysv/linux/renameat.c: New file.
* sysdeps/unix/sysv/linux/unlinkat.c: New file.
* sysdeps/unix/sysv/linux/alpha/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/i386/fchownat.c: New file.
* sysdeps/unix/sysv/linux/i386/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/m68k/fchownat.c: New file.
* sysdeps/unix/sysv/linux/m68k/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/powerpc/fchownat.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/s390/s390-32/fchownat.c: New file.
* sysdeps/unix/sysv/linux/s390/s390-32/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/sh/fchownat.c: New file.
* sysdeps/unix/sysv/linux/sh/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/fchownat.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/wordsize-64/fxstatat.c: New file.
* sysdeps/unix/sysv/linux/wordsize-64/fxstatat64.c: New file.
* time/sys/time.h: Declare futimesat.
* include/fcntl.h: Declare __atfct_seterrno.
* sysdeps/unix/sysv/linux/openat.c (__atfct_seterrno): New function.
Split out from openat code and called.
(do_test): Allow openat to fail with ENOSYS. Handle AT_FDCWD.
* sysdeps/generic/openat.c: Handle AT_FDCWD.
* sysdeps/generic/openat64.c: Likewise.
* io/tst-unlinkat.c: New file.
* io/tst-fstatat.c: New file.
* io/tst-futimesat.c: New file.
* io/tst-renameat.c: New file.
* io/tst-fchownat.c: New file.
* io/tst-openat.c: Don't fail if openat is not implemented.
* sysdeps/unix/sysv/linux/powerpc/chown.c: Don't provide backward
compatibility code if new kernel is guaranteed.
* time/sys/time.h: Add a few nonnull attributes.
* misc/sys/syslog.h: Include <bits/syslog.h> for fortification.
* misc/Makefile (headers): Add bits/syslog.h.
* include/sys/syslog.h: Add __vsyslog_chk prototype and hidden_proto.
* sysdeps/generic/syslog.c: Change vsyslog function to __vsyslog_chk.
Call __vfprintf_chk if necessary. Make vsyslog a wrapper. Add
__syslog_chk.
* misc/Versions: Export __syslog_chk and __vsyslog_chk.
* nis/nis_xdr.c: Help gcc to avoid generating unnecessary wrapper
functions.
2003-09-17 Philip Blundell <philb@gnu.org>
* sysdeps/unix/sysv/linux/arm/vfork.S: Branch to fork if
libpthread is loaded. Elide backwards compatibility code when not
required.
More cancellation handling fixups.
* sysdeps/unix/sysv/linux/not-cancel.h: Add waitpid_not_cancel.
* sysdeps/generic/not-cancel.h: Likewise.
* catgets/open_catalog.c: Use not-cancelable syscalls.
* time/Makefile (CFLAGS-getdate.c): Add -fexceptions.
* sysdeps/unix/sysv/linux/llseek.c: Must not be cancelable.
* sysdeps/unix/syscalls.list: Don't mark lseek as cancelable.
* dlfcn/dlfcn.h: Mark dlopen with __THROW again.
* io/fcntl.h: Don't mark posix_fallocate with __THROW.
* libio/fileops.c: Use not-cancelable syscalls for fclose.
* libio/iopopen.c: Use no-cancelable syscalls.
* libio/stdio.h: Mark popen and pclose with __THROW again.
* misc/Makefile (CFLAGS-syslog.c): Add -fexceptions.
* misc/syslog.c: Fix locking and cancellation cleanup handling.
* posix/unistd.h: Mark ttyname and ttyname_r again with __THROW.
* stdio-common/Makefile (CFLAGS-tmpfile.c, CFLAGS-tmpfile64.c,
CFLAGS-tempname.c): Add -fexceptions.
* stdlib/Makefile (CFLAGS-mkstemp.c): Add -fexceptions.
* string/string.h: Mark strerror and strerror_r with _THROW again.
* sysdeps/generic/unwind.inc: New file. Copied from gcc.
* sysdeps/generic/unwind-dw2.c: Update from gcc version. Remove
#ifs since we now need all the code compiled.
* sysdeps/posix/spawni.c: Use close_not_cancel instead of close.
* sysdeps/unix/closedir.c: Use not-cancelable syscalls.
* sysdeps/unix/opendir.c: Likewise.
2003-06-15 Ulrich Drepper <drepper@redhat.com>
Fix cancellation point handling wrt exception based cleanup.
* io/Makefile: Compile fcntl.c, poll.c, and lockf.c with exceptions.
* misc/Makefile: Compile pselect.c, readv.c, writev.c, and usleep.c
with exceptions.
* posix/Makefile: Compile pread.c, pread64.c, pwrite.c, pwrite64.c,
sleep.c, wait.c, waitid.c, and waitpid.c with exceptions.
* rt/Makefile: Compile aio_suspend.c and clock_nanosleep.c with
exceptions.
* signal/Makefile: Compile sigpause.c, sigsuspend.c, sigtimedwait.c,
sigwait.c, and sigwaitinfo.c with exceptions.
* stdlib/Makefile: Compile system.c with exceptions.
* sysvipc/Makefile: Compile msgrcv.c and msgsnd.c with exceptions.
* termios/Makefile: Compile tcdrain.c with exceptions.
* sysdeps/generic/lockf.c: Add comment explaining the cancellation
situation.
* sysdeps/generic/pselect.c: Likewise.
* sysdeps/posix/sigpause.c: Likewise.
* sysdeps/posix/system.c: Likewise.
* sysdeps/posix/waitid.c: Likewise.
* sysdeps/unix/sysv/linux/sleep.c: Likewise.
* sysdeps/unix/sysv/linux/usleep.c: Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep.h: Major rewrite of
INTERNAL_SYSCALL to not use push inside asm statement so that
unwind info is correct around the syscall.
* sysdeps/unix/clock_nanosleep.c: Add cancellation support.
* sysdeps/unix/sysv/linux/clock_nanosleep.c: Likewise.
