Commit Graph

85 Commits

Author SHA1 Message Date
Adhemerval Zanella
8c1c0aae20 nptl: Move cancel type out of cancelhandling
Now that the thread cancellation type is not accessed concurrently
anymore, it is possible to move it out the cancelhandling.

By removing the cancel state out of the internal thread cancel handling
state there is no need to check if cancelled bit was set in CAS
operation.

It allows simplifing the cancellation wrappers and the
CANCEL_CANCELED_AND_ASYNCHRONOUS is removed.

Checked on x86_64-linux-gnu and aarch64-linux-gnu.
2021-06-09 15:16:45 -03:00
Adhemerval Zanella
2b51742531 nptl: Move cancel state out of cancelhandling
Now that thread cancellation state is not accessed concurrently anymore,
it is possible to move it out the 'cancelhandling'.

The code is also simplified: CANCELLATION_P is replaced with a
internal pthread_testcancel call and the CANCELSTATE_BIT{MASK} is
removed.

With this behavior pthread_setcancelstate does not require to act on
cancellation if cancel type is asynchronous (is already handled either
by pthread_setcanceltype or by the signal handler).

Checked on x86_64-linux-gnu and aarch64-linux-gnu.
2021-06-09 15:16:45 -03:00
Adhemerval Zanella
26cfbb7162 nptl: Remove CANCELING_BITMASK
The CANCELING_BITMASK is used as an optimization to avoid sending
the signal when pthread_cancel is called in a concurrent manner.

This requires then to put both the cancellation state and type on a
shared state (cancelhandling), since 'pthread_cancel' checks whether
cancellation is enabled and asynchrnous to either cancel itself of
 sending the signal.

It also requires handle the CANCELING_BITMASK on
__pthread_disable_asynccancel, however this incurs in the same issues
described on BZ#12683: the cancellation is acted upon even *after*
syscall returns with user visible side-effects.

This patch removes this optimization and simplifies the pthread
cancellation implementation: pthread_cancel now first checks if
cancellation is already pending and if not always, sends a signal
if the target is not itself.  The SIGCANCEL handler is also simpified
since there is not need to setup a CAS loop.

It also allows to move both the cancellation state and mode out of
'cancelhadling' (it is done in subsequent patches).

Checked on x86_64-linux-gnu and aarch64-linux-gnu.
2021-06-09 15:16:45 -03:00
Adhemerval Zanella
02189e8fb0 nptl: Deallocate the thread stack on setup failure (BZ #19511)
To setup either the thread scheduling parameters or affinity,
pthread_create enforce synchronization on created thread to wait until
its parent either release PD ownership or send a cancellation signal if
a failure occurs.

However, cancelling the thread does not deallocate the newly created
stack since cancellation expects that a pthread_join to deallocate any
allocated thread resouces (threads stack or TLS).

This patch changes on how the thread resource is deallocate in case of
failure to be synchronous, where the creating thread will signal the
created thread to exit early so it could be joined.  The creating thread
will be reponsible for the resource cleanup before returning to the
caller.

To signal the creating thread that a failure has occured, an unused
'struct pthread' member, parent_cancelhandling_unsed, now indicates
whether the setup has failed so creating thread can proper exit.

This strategy also simplifies by not using thread cancellation and
thus not running libgcc_so load in the signal handler (which is
avoided in thread cancellation since 'pthread_cancel' is the one
responsible to dlopen libgcc_s).  Another advantage is since the
early exit is move to first step at thread creation, the signal
mask is not already set and thus it can not act on change ID setxid
handler.

Checked on x86_64-linux-gnu and aarch64-linux-gnu.
2021-06-09 15:16:45 -03:00
Florian Weimer
c79a31fb36 nptl: Move stack cache management, __libpthread_freeres into libc
This replaces the FREE_P macro with the __nptl_stack_in_use inline
function.  stack_list_del is renamed to __nptl_stack_list_del,
stack_list_add to __nptl_stack_list_add, __deallocate_stack to
__nptl_deallocate_stack, free_stacks to __nptl_free_stacks.

It is convenient to move __libpthread_freeres into libc at the
same time.  This removes the temporary __default_pthread_attr_freeres
export and restores full freeres coverage for __default_pthread_attr.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2021-05-11 11:22:33 +02:00
Paul Eggert
2b778ceb40 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
2021-01-02 12:17:34 -08:00
Florian Weimer
1daccf403b nptl: Move stack list variables into _rtld_global
Now __thread_gscope_wait (the function behind THREAD_GSCOPE_WAIT,
formerly __wait_lookup_done) can be implemented directly in ld.so,
eliminating the unprotected GL (dl_wait_lookup_done) function
pointer.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>
2020-11-16 19:33:30 +01:00
H.J. Lu
0ad926f349 nptl: Zero-extend arguments to SETXID syscalls [BZ #26248]
nptl has

/* Opcodes and data types for communication with the signal handler to
   change user/group IDs.  */
struct xid_command
{
  int syscall_no;
  long int id[3];
  volatile int cntr;
  volatile int error;
};

 /* This must be last, otherwise the current thread might not have
     permissions to send SIGSETXID syscall to the other threads.  */
  result = INTERNAL_SYSCALL_NCS (cmdp->syscall_no, 3,
                                 cmdp->id[0], cmdp->id[1], cmdp->id[2]);

But the second argument of setgroups syscal is a pointer:

       int setgroups (size_t size, const gid_t *list);

But on x32, pointers passed to syscall must have pointer type so that
they will be zero-extended.  The kernel XID arguments are unsigned and
do not require sign extension.  Change xid_command to

struct xid_command
{
  int syscall_no;
  unsigned long int id[3];
  volatile int cntr;
  volatile int error;
};

so that all arguments are zero-extended.  A testcase is added for x32 and
setgroups returned with EFAULT when running as root without the fix.
2020-07-27 12:32:41 -07:00
Adhemerval Zanella
9deec7c8ba string: Remove old TLS usage on strsignal
The per-thread state is refactored two use two strategies:

  1. The default one uses a TLS structure, which will be placed in the
     static TLS space (using __thread keyword).

  2. Linux allocates via struct pthread and access it through THREAD_*
     macros.

The default strategy has the disadvantage of increasing libc.so static
TLS consumption and thus decreasing the possible surplus used in
some scenarios (which might be mitigated by BZ#25051 fix).

It is used only on Hurd, where accessing the thread storage in the in
single thread case is not straightforward (afaiu, Hurd developers could
correct me here).

The fallback static allocation used for allocation failure is also
removed: defining its size is problematic without synchronizing with
translated messages (to avoid partial translation) and the resulting
usage is not thread-safe.

Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.

Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-07-07 14:10:58 -03:00
Florian Weimer
b3cae39dcb nptl: Start new threads with all signals blocked [BZ #25098]
New threads inherit the signal mask from the current thread.  This
means that signal handlers can run on the newly created thread
immediately after the kernel has created the userspace thread, even
before glibc has initialized the TCB.  Consequently, new threads can
observe uninitialized ctype data, among other things.

To address this, block all signals before starting the thread, and
pass the original signal mask to the start routine wrapper.  On the
new thread, first perform all thread initialization, and then unblock
signals.

The cost of doing this is two rt_sigprocmask system calls on the old
thread, and one rt_sigprocmask system call on the new thread.  (If
there was a way to clone a new thread with a signals disabled, this
could be brought down to one system call each.)  The thread descriptor
increases in size, too, and sigset_t is fairly large.  This increase
could be brought down by reusing space the in the descriptor which is
not needed before running user code, or by switching to an internal
sigset_t definition which only covers the signals supported by the
kernel definition.  (Part of the thread descriptor size increase is
already offset by reduced stack usage in the thread start wrapper
routine after this commit.)

Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-04-27 10:04:24 +02:00
Joseph Myers
d614a75396 Update copyright dates with scripts/update-copyrights. 2020-01-01 00:14:33 +00:00
Paul Eggert
5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00
Adhemerval Zanella
1e372ded4f Refactor hp-timing rtld usage
This patch refactor how hp-timing is used on loader code for statistics
report.  The HP_TIMING_AVAIL and HP_SMALL_TIMING_AVAIL are removed and
HP_TIMING_INLINE is used instead to check for hp-timing avaliability.
For alpha, which only defines HP_SMALL_TIMING_AVAIL, the HP_TIMING_INLINE
is set iff for IS_IN(rtld).

Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked the builds for all afected ABIs.

	* benchtests/bench-timing.h: Replace HP_TIMING_AVAIL with
	HP_TIMING_INLINE.
	* nptl/descr.h: Likewise.
	* elf/rtld.c (RLTD_TIMING_DECLARE, RTLD_TIMING_NOW, RTLD_TIMING_DIFF,
	RTLD_TIMING_ACCUM_NT, RTLD_TIMING_SET): Define.
	(dl_start_final_info, _dl_start_final, dl_main, print_statistics):
	Abstract hp-timing usage with RTLD_* macros.
	* sysdeps/alpha/hp-timing.h (HP_TIMING_INLINE): Define iff IS_IN(rtld).
	(HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL): Remove.
	* sysdeps/generic/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL,
	HP_TIMING_NONAVAIL): Likewise.
	* sysdeps/ia64/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL):
	Likewise.
	* sysdeps/powerpc/powerpc32/power4/hp-timing.h (HP_TIMING_AVAIL,
	HP_SMALL_TIMING_AVAIL): Likewise.
	* sysdeps/powerpc/powerpc64/hp-timing.h (HP_TIMING_AVAIL,
	HP_SMALL_TIMING_AVAIL): Likewise.
	* sysdeps/sparc/sparc32/sparcv9/hp-timing.h (HP_TIMING_AVAIL,
	HP_SMALL_TIMING_AVAIL): Likewise.
	* sysdeps/sparc/sparc64/hp-timing.h (HP_TIMING_AVAIL,
	HP_SMALL_TIMING_AVAIL): Likewise.
	* sysdeps/x86/hp-timing.h (HP_TIMING_AVAIL, HP_SMALL_TIMING_AVAIL):
	Likewise.
	* sysdeps/generic/hp-timing-common.h: Update comment with
	HP_TIMING_AVAIL removal.
2019-03-22 17:30:44 -03:00
Adhemerval Zanella
38cc11daa4 nptl: Remove pthread_clock_gettime pthread_clock_settime
This patch removes CLOCK_THREAD_CPUTIME_ID and CLOCK_PROCESS_CPUTIME_ID support
from clock_gettime and clock_settime generic implementation.  For Linux, kernel
already provides supports through the syscall and Hurd HTL lacks
__pthread_clock_gettime and __pthread_clock_settime internal implementation.

As described in clock_gettime man-page [1] on 'Historical note for SMP
system', implementing CLOCK_{THREAD,PROCESS}_CPUTIME_ID with timer registers
is error-prone and susceptible to timing and accurary issues that the libc
can not deal without kernel support.

This allows removes unused code which, however, still incur in some runtime
overhead in thread creation (the struct pthread cpuclock_offset
initialization).

If hurd eventually wants to support them it should either either implement as
a kernel facility (or something related due its architecture) or in system
specific implementation.

Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu. I also
checked on a i686-gnu build.

	* nptl/Makefile (libpthread-routines): Remove pthread_clock_gettime and
	pthread_clock_settime.
	* nptl/pthreadP.h (__find_thread_by_id): Remove prototype.
	* elf/dl-support.c [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset): Remove.
	(_dl_non_dynamic_init): Remove _dl_cpuclock_offset setting.
	* elf/rtld.c (_dl_start_final): Likewise.
	* nptl/allocatestack.c (__find_thread_by_id): Remove function.
	* sysdeps/generic/ldsodefs.h [!HP_TIMING_NOAVAIL] (_dl_cpuclock_offset):
	Remove.
	* sysdeps/mach/hurd/dl-sysdep.c [!HP_TIMING_NOAVAIL]
	(_dl_cpuclock_offset): Remove.
	* nptl/descr.h (struct pthread): Rename cpuclock_offset to
	cpuclock_offset_ununsed.
	* nptl/nptl-init.c (__pthread_initialize_minimal_internal): Remove
	cpuclock_offset set.
	* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
	* sysdeps/nptl/fork.c (__libc_fork): Likewise.
	* nptl/pthread_clock_gettime.c: Remove file.
	* nptl/pthread_clock_settime.c: Likewise.
	* sysdeps/unix/clock_gettime.c (hp_timing_gettime): Remove function.
	[HP_TIMING_AVAIL] (realtime_gettime): Remove CLOCK_THREAD_CPUTIME_ID
	and CLOCK_PROCESS_CPUTIME_ID support.
	* sysdeps/unix/clock_settime.c (hp_timing_gettime): Likewise.
	[HP_TIMING_AVAIL] (realtime_gettime): Likewise.
	* sysdeps/posix/clock_getres.c (hp_timing_getres): Likewise.
	[HP_TIMING_AVAIL] (__clock_getres): Likewise.
	* sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P, INVALID_CLOCK_P):
	Likewise.
	(__clock_nanosleep): Remove CPUCLOCK_P and INVALID_CLOCK_P usage.

[1] http://man7.org/linux/man-pages/man2/clock_gettime.2.html
2019-03-22 15:37:43 -03:00
Florian Weimer
a198d37ade Move remaining nptl_db headers to sysdeps/nptl
sys/procfs.h was already using this sysdeps directory.

This avoids the need for  nptl-specific wrapper headers under
include/, a generic location in the source tree.
2019-02-16 08:25:16 +01:00
Joseph Myers
04277e02d7 Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2019-01-01 00:11:28 +00:00
Adhemerval Zanella
ce7528f637 nptl: Add C11 threads thrd_* functions
This patch adds the thrd_* definitions from C11 threads (ISO/IEC 9899:2011),
more specifically thrd_create, thrd_curent, rhd_detach, thrd_equal,
thrd_exit, thrd_join, thrd_sleep, thrd_yield, and required types.

Mostly of the definitions are composed based on POSIX conterparts, such as
thrd_t (using pthread_t).  For thrd_* function internally direct
POSIX pthread call are used with the exceptions:

  1. thrd_start uses pthread_create internal implementation, but changes
     how to actually calls the start routine.  This is due the difference
     in signature between POSIX and C11, where former return a 'void *'
     and latter 'int'.
     To avoid calling convention issues due 'void *' to int cast, routines
     from C11 threads are started slight different than default pthread one.
     Explicit cast to expected return are used internally on pthread_create
     and the result is stored back to void also with an explicit cast.

  2. thrd_sleep uses nanosleep internal direct syscall to avoid clobbering
     errno and to handle expected standard return codes.  It is a
     cancellation entrypoint to be consistent with both thrd_join and
     cnd_{timed}wait.

  3. thrd_yield also uses internal direct syscall to avoid errno clobbering.

Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).

Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.

	[BZ #14092]
	* conform/Makefile (conformtest-headers-ISO11): Add threads.h.
	(linknamespace-libs-ISO11): Add libpthread.a.
	* conform/data/threads.h-data: New file: add C11 thrd_* types and
	functions.
	* include/stdc-predef.h (__STDC_NO_THREADS__): Remove definition.
	* nptl/Makefile (headers): Add threads.h.
	(libpthread-routines): Add new C11 thread thrd_create, thrd_current,
	thrd_detach, thrd_equal, thrd_exit, thrd_join, thrd_sleep, and
	thrd_yield.
	* nptl/Versions (libpthread) [GLIBC_2.28]): Add new C11 thread
	thrd_create, thrd_current, thrd_detach, thrd_equal, thrd_exit,
	thrd_join, thrd_sleep, and thrd_yield symbols.
	* nptl/descr.h (struct pthread): Add c11 field.
	* nptl/pthreadP.h (ATTR_C11_THREAD): New define.
	* nptl/pthread_create.c (START_THREAD_DEFN): Call C11 thread start
	routine with expected function prototype.
	(__pthread_create_2_1): Add C11 threads check based on attribute
	value.
	* sysdeps/unix/sysdep.h (INTERNAL_SYSCALL_CANCEL): New macro.
	* nptl/thrd_create.c: New file.
	* nptl/thrd_current.c: Likewise.
	* nptl/thrd_detach.c: Likewise.
	* nptl/thrd_equal.c: Likewise.
	* nptl/thrd_exit.c: Likewise.
	* nptl/thrd_join.c: Likewise.
	* nptl/thrd_priv.h: Likewise.
	* nptl/thrd_sleep.c: Likewise.
	* nptl/thrd_yield.c: Likewise.
	* include/threads.h: Likewise.
2018-07-24 14:06:45 -03:00
H.J. Lu
0068c08588 nptl: Remove __ASSUME_PRIVATE_FUTEX
Since __ASSUME_PRIVATE_FUTEX is always defined, this patch removes the
!__ASSUME_PRIVATE_FUTEX paths.

Tested with build-many-glibcs.py.

	* nptl/allocatestack.c (allocate_stack): Remove the
	!__ASSUME_PRIVATE_FUTEX paths.
	* nptl/descr.h (header): Remove the !__ASSUME_PRIVATE_FUTEX path.
	* nptl/nptl-init.c (__pthread_initialize_minimal_internal):
	Likewise.
	* sysdeps/i386/nptl/tcb-offsets.sym (PRIVATE_FUTEX): Removed.
	* sysdeps/powerpc/nptl/tcb-offsets.sym (PRIVATE_FUTEX): Likewise.
	* sysdeps/sh/nptl/tcb-offsets.sym (PRIVATE_FUTEX): Likewise.
	* sysdeps/x86_64/nptl/tcb-offsets.sym (PRIVATE_FUTEX): Likewise.
	* sysdeps/i386/nptl/tls.h: (tcbhead_t): Remve the
	!__ASSUME_PRIVATE_FUTEX path.
	* sysdeps/s390/nptl/tls.h (tcbhead_t): Likewise.
	* sysdeps/sparc/nptl/tls.h (tcbhead_t): Likewise.
	* sysdeps/x86_64/nptl/tls.h (tcbhead_t): Likewise.
	* sysdeps/unix/sysv/linux/i386/lowlevellock.S: Remove the
	!__ASSUME_PRIVATE_FUTEX macros.
	* sysdeps/unix/sysv/linux/lowlevellock-futex.h: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/cancellation.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise.
	* sysdeps/unix/sysv/linux/kernel-features.h
	(__ASSUME_PRIVATE_FUTEX): Removed.
2018-05-17 04:25:10 -07:00
Carlos O'Donell
2ec0e7eade Revert Intel CET changes to __jmp_buf_tag (Bug 22743)
In commit cba595c350 and commit
f81ddabffd, ABI compatibility with
applications was broken by increasing the size of the on-stack
allocated __pthread_unwind_buf_t beyond the oringal size.
Applications only have the origianl space available for
__pthread_unwind_register, and __pthread_unwind_next to use,
any increase in the size of __pthread_unwind_buf_t causes these
functions to write beyond the original structure into other
on-stack variables leading to segmentation faults in common
applications like vlc. The only workaround is to version those
functions which operate on the old sized objects, but this must
happen in glibc 2.28.

Thank you to Andrew Senkevich, H.J. Lu, and Aurelien Jarno, for
submitting reports and tracking the issue down.

The commit reverts the above mentioned commits and testing on
x86_64 shows that the ABI compatibility is restored. A tst-cleanup1
regression test linked with an older glibc now passes when run
with the newly built glibc. Previously a tst-cleanup1 linked with
an older glibc would segfault when run with an affected glibc build.

Tested on x86_64 with no regressions.

Signed-off-by: Carlos O'Donell <carlos@redhat.com>
2018-01-25 23:43:46 -08:00
Szabolcs Nagy
630f4cc3aa [BZ #22637] Fix stack guard size accounting
Previously if user requested S stack and G guard when creating a
thread, the total mapping was S and the actual available stack was
S - G - static_tls, which is not what the user requested.

This patch fixes the guard size accounting by pretending the user
requested S+G stack.  This way all later logic works out except
when reporting the user requested stack size (pthread_getattr_np)
or when computing the minimal stack size (__pthread_get_minstack).

Normally this will increase thread stack allocations by one page.
TLS accounting is not affected, that will require a separate fix.

	[BZ #22637]
	* nptl/descr.h (stackblock, stackblock_size): Update comments.
	* nptl/allocatestack.c (allocate_stack): Add guardsize to stacksize.
	* nptl/nptl-init.c (__pthread_get_minstack): Remove guardsize from
	stacksize.
	* nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise.
2018-01-08 19:02:11 +00:00
Joseph Myers
688903eb3e Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2018-01-01 00:32:25 +00:00
H.J. Lu
f81ddabffd Linux/x86: Update cancel_jmp_buf to match __jmp_buf_tag [BZ #22563]
On x86, padding in struct __jmp_buf_tag is used for shadow stack pointer
to support shadow stack in Intel Control-flow Enforcemen Technology.
Since the cancel_jmp_buf array is passed to setjmp and longjmp by
casting it to pointer to struct __jmp_buf_tag, it should be as large
as struct __jmp_buf_tag.  Otherwise when shadow stack is enabled,
setjmp and longjmp will write and read beyond cancel_jmp_buf when saving
and restoring shadow stack pointer.

This patch adds bits/types/__cancel_jmp_buf_tag.h to define struct
__cancel_jmp_buf_tag so that Linux/x86 can add saved_mask to
cancel_jmp_buf.

Tested natively on i386, x86_64 and x32.  Tested hppa-linux-gnu with
build-many-glibcs.py.

	[BZ #22563]
	* bits/types/__cancel_jmp_buf_tag.h: New file.
	* sysdeps/unix/sysv/linux/x86/bits/types/__cancel_jmp_buf_tag.h
	* sysdeps/unix/sysv/linux/x86/pthreaddef.h: Likewise.
	* sysdeps/unix/sysv/linux/x86/nptl/pthreadP.h: Likewise.
	* nptl/Makefile (headers): Add
	bits/types/__cancel_jmp_buf_tag.h.
	* nptl/descr.h [NEED_SAVED_MASK_IN_CANCEL_JMP_BUF]
	(pthread_unwind_buf): Add saved_mask to cancel_jmp_buf.
	* sysdeps/nptl/pthread.h: Include
	<bits/types/__cancel_jmp_buf_tag.h>.
	(__pthread_unwind_buf_t): Use struct __cancel_jmp_buf_tag with
	__cancel_jmp_buf.
	* sysdeps/unix/sysv/linux/hppa/pthread.h: Likewise.
2017-12-19 02:44:04 -08:00
Adhemerval Zanella
06be6368da nptl: Define __PTHREAD_MUTEX_{NUSERS_AFTER_KIND,USE_UNION}
This patch adds two new internal defines to set the internal
pthread_mutex_t layout required by the supported ABIS:

  1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define
     __nusers fields before or after __kind.  The preferred value for
     is 0 for new ports and it sets __nusers before __kind.

  2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and
     __list members will be place inside an union for linuxthreads
     compatibility.  The preferred value is 0 for ports and it sets
     to not use an union to define both fields.

It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32.
Checked with a make check run-built-tests=no on all afected ABIs.

	[BZ #22298]
	* nptl/allocatestack.c (allocate_stack): Check if
	__PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if
	__PTHREAD_MUTEX_HAVE_PREV is defined.
	* nptl/descr.h (pthread): Likewise.
	* nptl/nptl-init.c (__pthread_initialize_minimal_internal):
	Likewise.
	* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
	* sysdeps/nptl/fork.c (__libc_fork): Likewise.
	* sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise.
	* sysdeps/nptl/bits/thread-shared-types.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
	defines.
	(__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead
	of __WORDSIZE for internal layout.
	(__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead
	of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION
	instead of __WORDSIZE whether to use an union for __spins and __list
	fields.
	(__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION
	case.
	* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
	defines.
	* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.
	* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.
	* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.
	* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.
	* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.
	* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.
	* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.
	* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.
	* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.
	* sysdeps/s390/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.
	* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.
	* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.
	* sysdeps/tile/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.
	* sysdeps/x86/nptl/bits/pthreadtypes-arch.h
	(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
	Likewise.

Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2017-11-07 09:48:41 -02:00
Zack Weinberg
500b3a499f Remove __need_list_t and __need_res_state.
These __need macros are only used internally, by nptl/descr.h.
However, including all of resolv.h from descr.h causes build failures
due to resolv.h's dozens of pseudo-struct-field macros, some of which
collide with struct fields in NPTL internal data structures.
Similarly, including all of list.h from descr.h produces an include
cycle, atomic.h -> atomic-machine.h -> tls.h -> descr.h -> list.h ->
atomic.h, and then list.h tries to use atomic.h macros that haven't
been defined yet.  So we do need mini-headers for these.  In the
list.h case I called it include/list_t.h since it isn't going to be
installed.

	* resolv/resolv.h: Remove __need_res_state logic.
	Move definition of res_state and related constants to ...
	* resolv/bits/types/res_state.h: ...this new file.
	* resolv/Makefile: Install bits/types/res_state.h.
	* include/bits/types/res_state.h: New wrapper.
	* include/list.h: Remove __need_list_t logic.
	Move definition of list_t to ...
	* include/list_t.h: ...this new file.

	* nptl/descr.h: Include list_t.h and bits/types/res_state.h
	instead of list.h and resolv.h.
2017-05-20 19:01:46 -04:00
Torvald Riegel
8f9450a0b7 Add compiler barriers around modifications of the robust mutex list.
Any changes to the per-thread list of robust mutexes currently acquired as
well as the pending-operations entry are not simply sequential code but
basically concurrent with any actions taken by the kernel when it tries
to clean up after a crash.  This is not quite like multi-thread concurrency
but more like signal-handler concurrency.
This patch fixes latent bugs by adding compiler barriers where necessary so
that it is ensured that the kernel crash handling sees consistent data.

This is meant to be easy to backport, so we do not use C11-style signal
fences yet.

	* nptl/descr.h (ENQUEUE_MUTEX_BOTH, DEQUEUE_MUTEX): Add compiler
	barriers and comments.
	* nptl/pthread_mutex_lock.c (__pthread_mutex_lock_full): Likewise.
	* nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock): Likewise.
	* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_full): Likewise.
2017-01-13 23:12:32 +01:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Adhemerval Zanella
c579f48edb Remove cached PID/TID in clone
This patch remove the PID cache and usage in current GLIBC code.  Current
usage is mainly used a performance optimization to avoid the syscall,
however it adds some issues:

  - The exposed clone syscall will try to set pid/tid to make the new
    thread somewhat compatible with current GLIBC assumptions.  This cause
    a set of issue with new workloads and usecases (such as BZ#17214 and
    [1]) as well for new internal usage of clone to optimize other algorithms
    (such as clone plus CLONE_VM for posix_spawn, BZ#19957).

  - The caching complexity also added some bugs in the past [2] [3] and
    requires more effort of each port to handle such requirements (for
    both clone and vfork implementation).

  - Caching performance gain in mainly on getpid and some specific
    code paths.  The getpid performance leverage is questionable [4],
    either by the idea of getpid being a hotspot as for the getpid
    implementation itself (if it is indeed a justifiable hotspot a
    vDSO symbol could let to a much more simpler solution).

    Other usage is mainly for non usual code paths, such as pthread
    cancellation signal and handling.

For thread creation (on stack allocation) the code simplification in fact
adds some performance gain due the no need of transverse the stack cache
and invalidate each element pid.

Other thread usages will require a direct getpid syscall, such as
cancellation/setxid signal, thread cancellation, thread fail path (at
create_thread), and thread signal (pthread_kill and pthread_sigqueue).
However these are hardly usual hotspots and I think adding a syscall is
justifiable.

It also simplifies both the clone and vfork arch-specific implementation.
And by review each fork implementation there are some discrepancies that
this patch also solves:

  - microblaze clone/vfork does not set/reset the pid/tid field
  - hppa uses the default vfork implementation that fallback to fork.
    Since vfork is deprecated I do not think we should bother with it.

The patch also removes the TID caching in clone. My understanding for
such semantic is try provide some pthread usage after a user program
issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
and pthread tid member).  However, as stated before in multiple discussions
threads, GLIBC provides clone syscalls without further supporting all this
semantics.

I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le.
For sparc32, sparc64, and mips I ran the basic fork and vfork tests from
posix/ folder (on a qemu system).  So it would require further testing
on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze
because it is already implementing the patch semantic regarding clone/vfork).

[1] https://codereview.chromium.org/800183004/
[2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368
[4] http://yarchive.net/comp/linux/getpid_caching.html

	* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
	* nptl/allocatestack.c (allocate_stack): Likewise.
	(__reclaim_stacks): Likewise.
	(setxid_signal_thread): Obtain pid through syscall.
	* nptl/nptl-init.c (sigcancel_handler): Likewise.
	(sighandle_setxid): Likewise.
	* nptl/pthread_cancel.c (pthread_cancel): Likewise.
	* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
	* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
	Likewise.
	* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
	* sysdeps/unix/sysv/linux/getpid.c: Remove file.
	* nptl/descr.h (struct pthread): Change comment about pid value.
	* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
	pid assert.
	* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
	Do not set pid value.
	* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
	pid cache check.
	* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
	* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
	* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
	* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
	* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
	* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
	struct access.
	(clone_test): Remove function.
	(do_test): Rewrite to take in consideration pid is not cached anymore.
2016-11-24 19:38:51 -02:00
Joseph Myers
f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Joseph Myers
3e2ee6f0e3 Remove sysdeps/nptl/configure.ac.
sysdeps/nptl/configure.ac tests for forced unwind support and the C
cleanup attribute, giving errors if either is unsupported.  It does
nothing beyond running those two tests.

Both the attribute, and _Unwind_GetCFA which is used in the forced
unwind test, were added in GCC 3.3.  Thus these tests are long
obsolete, and this patch removes the configure fragment running them,
along with associated conditionals.

Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).

	* sysdeps/nptl/configure.ac: Remove file.
	* sysdeps/nptl/configure: Remove generated file.
	* configure.ac (libc_cv_forced_unwind): Do not substitute.
	* configure: Regenerated.
	* config.h.in (HAVE_FORCED_UNWIND): Remove #undef.
	* config.make.in (have-forced-unwind): Remove variable.
	* nptl/Makefile [$(have-forced-unwind) = yes]: Make code
	unconditional.
	* nptl/descr.h [HAVE_FORCED_UNWIND]: Likewise.
	* nptl/unwind.c [HAVE_FORCED_UNWIND]: Likewise.
	(__pthread_unwind) [!HAVE_FORCED_UNWIND]: Remove conditional code.
	* nptl/version.c [HAVE_FORCED_UNWIND]: Make code unconditional.
	* sysdeps/nptl/Makefile [$(have-forced-unwind) = yes]: Make code
	unconditional.
2015-10-27 21:46:03 +00:00
Roland McGrath
45a8f0e662 NPTL: Use unsigned type for setxid_futex. 2015-06-24 18:09:32 -07:00
Joseph Myers
b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
Florian Weimer
771eb1415f nptl: Fix abort in case of set*id failure [BZ #17135]
If a call to the set*id functions fails in a multi-threaded program,
the abort introduced in commit 13f7fe35ae
was triggered.

We address by checking that all calls to set*id on all threads give
the same result, and only abort if we see success followed by failure
(or vice versa).
2014-07-11 12:30:53 +02:00
Allan McRae
d4697bc93d Update copyright notices with scripts/update-copyrights 2014-01-01 22:00:23 +10:00
Joseph Myers
568035b787 Update copyright notices with scripts/update-copyrights. 2013-01-02 19:05:09 +00:00
Siddhesh Poyarekar
439bf404b8 Allow a single-threaded program to cancel itself
There is nothing in the POSIX specification to disallow a
single-threaded program from cancelling itself, so we forcibly enable
multiple_threads to allow the next available cancellation point in the
thread to run.

Also added additional tests to cover various cancellation scenarios.
2012-05-15 09:41:57 +05:30
Paul Eggert
59ba27a63a Replace FSF snail mail address with URLs. 2012-02-09 23:18:22 +00:00
Andreas Schwab
7a775e6b3d Avoid race between {,__de}allocate_stack and __reclaim_stacks during fork 2011-09-15 15:36:18 +02:00
Ulrich Drepper
bd03a1afa2 Macro cleanup.
Better definition of the *_NITSET macros.
2009-07-31 22:30:30 -07:00
Ulrich Drepper
9e9b8cb84e (struct pthread): Increase padding for tcbhead_t to 24 words. 2008-12-08 23:25:14 +00:00
Ulrich Drepper
e51deae7f6 * sysdeps/unix/sysv/linux/powerpc/sem_post.c (__new_sem_post):
Use __asm __volatile (__lll_acq_instr ::: "memory") instead of
	atomic_full_barrier.

2007-07-31  Jakub Jelinek  <jakub@redhat.com>

	* allocatestack.c (stack_cache_lock): Change type to int.
	(get_cached_stack, allocate_stack, __deallocate_stack,
	__make_stacks_executable, __find_thread_by_id, __nptl_setxid,
	__pthread_init_static_tls, __wait_lookup_done): Add LLL_PRIVATE
	as second argument to lll_lock and lll_unlock macros on
	stack_cache_lock.
	* pthread_create.c (__find_in_stack_list): Likewise.
	(start_thread): Similarly with pd->lock.  Use lll_robust_dead
	macro instead of lll_robust_mutex_dead, pass LLL_SHARED to it
	as second argument.
	* descr.h (struct pthread): Change lock and setxid_futex field
	type to int.
	* old_pthread_cond_broadcast.c (__pthread_cond_broadcast_2_0): Use
	LLL_LOCK_INITIALIZER instead of LLL_MUTEX_LOCK_INITIALIZER.
	* old_pthread_cond_signal.c (__pthread_cond_signal_2_0): Likewise.
	* old_pthread_cond_timedwait.c (__pthread_cond_timedwait_2_0):
	Likewise.
	* old_pthread_cond_wait.c (__pthread_cond_wait_2_0): Likewise.
	* pthread_cond_init.c (__pthread_cond_init): Likewise.
	* pthreadP.h (__attr_list_lock): Change type to int.
	* pthread_attr_init.c (__attr_list_lock): Likewise.
	* pthread_barrier_destroy.c (pthread_barrier_destroy): Pass
	ibarrier->private ^ FUTEX_PRIVATE_FLAG as second argument to
	lll_{,un}lock.
	* pthread_barrier_wait.c (pthread_barrier_wait): Likewise and
	also for lll_futex_{wake,wait}.
	* pthread_barrier_init.c (pthread_barrier_init): Make iattr
	a pointer to const.
	* pthread_cond_broadcast.c (__pthread_cond_broadcast): Pass
	LLL_SHARED as second argument to lll_{,un}lock.
	* pthread_cond_destroy.c (__pthread_cond_destroy): Likewise.
	* pthread_cond_signal.c (__pthread_cond_singal): Likewise.
	* pthread_cond_timedwait.c (__pthread_cond_timedwait): Likewise.
	* pthread_cond_wait.c (__condvar_cleanup, __pthread_cond_wait):
	Likewise.
	* pthread_getattr_np.c (pthread_getattr_np): Add LLL_PRIVATE
	as second argument to lll_{,un}lock macros on pd->lock.
	* pthread_getschedparam.c (__pthread_getschedparam): Likewise.
	* pthread_setschedparam.c (__pthread_setschedparam): Likewise.
	* pthread_setschedprio.c (pthread_setschedprio): Likewise.
	* tpp.c (__pthread_tpp_change_priority, __pthread_current_priority):
	Likewise.
	* sysdeps/pthread/createthread.c (do_clone, create_thread):
	Likewise.
	* pthread_once.c (once_lock): Change type to int.
	(__pthread_once): Pass LLL_PRIVATE as second argument to
	lll_{,un}lock macros on once_lock.
	* pthread_rwlock_rdlock.c (__pthread_rwlock_rdlock): Use
	lll_{,un}lock macros instead of lll_mutex_{,un}lock, pass
	rwlock->__data.__shared as second argument to them and similarly
	for lll_futex_w*.
	* pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock):
	Likewise.
	* pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock):
	Likewise.
	* pthread_rwlock_tryrdlock.c (__pthread_rwlock_tryrdlock): Likewise.
	* pthread_rwlock_trywrlock.c (__pthread_rwlock_trywrlock): Likewise.
	* pthread_rwlock_unlock.c (__pthread_rwlock_unlock): Likewise.
	* pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock): Likewise.
	* sem_close.c (sem_close): Pass LLL_PRIVATE as second argument
	to lll_{,un}lock macros on __sem_mappings_lock.
	* sem_open.c (check_add_mapping): Likewise.
	(__sem_mappings_lock): Change type to int.
	* semaphoreP.h (__sem_mappings_lock): Likewise.
	* pthread_mutex_lock.c (LLL_MUTEX_LOCK, LLL_MUTEX_TRYLOCK,
	LLL_ROBUST_MUTEX_LOCK): Use lll_{,try,robust_}lock macros
	instead of lll_*mutex_*, pass LLL_SHARED as last
	argument.
	(__pthread_mutex_lock): Use lll_unlock instead of lll_mutex_unlock,
	pass LLL_SHARED as last argument.
	* sysdeps/unix/sysv/linux/pthread_mutex_cond_lock.c (LLL_MUTEX_LOCK,
	LLL_MUTEX_TRYLOCK, LLL_ROBUST_MUTEX_LOCK): Use
	lll_{cond_,cond_try,robust_cond}lock macros instead of lll_*mutex_*,
	pass LLL_SHARED as last argument.
	* pthread_mutex_timedlock.c (pthread_mutex_timedlock): Use
	lll_{timed,try,robust_timed,un}lock instead of lll_*mutex*, pass
	LLL_SHARED as last argument.
	* pthread_mutex_trylock.c (__pthread_mutex_trylock): Similarly.
	* pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt):
	Similarly.
	* sysdeps/pthread/bits/libc-lock.h (__libc_lock_lock,
	__libc_lock_lock_recursive, __libc_lock_unlock,
	__libc_lock_unlock_recursive): Pass LLL_PRIVATE as second
	argument to lll_{,un}lock.
	* sysdeps/pthread/bits/stdio-lock.h (_IO_lock_lock,
	_IO_lock_unlock): Likewise.
	* sysdeps/unix/sysv/linux/fork.c (__libc_fork): Don't use
	compound literal.
	* sysdeps/unix/sysv/linux/unregister-atfork.c (__unregister_atfork):
	Pass LLL_PRIVATE as second argument to lll_{,un}lock macros on
	__fork_lock.
	* sysdeps/unix/sysv/linux/register-atfork.c (__register_atfork,
	free_mem): Likewise.
	(__fork_lock): Change type to int.
	* sysdeps/unix/sysv/linux/fork.h (__fork_lock): Likewise.
	* sysdeps/unix/sysv/linux/sem_post.c (__new_sem_post): Pass
	isem->private ^ FUTEX_PRIVATE_FLAG as second argument to
	lll_futex_wake.
	* sysdeps/unix/sysv/linux/sem_timedwait.c (sem_timedwait): Likewise.
	* sysdeps/unix/sysv/linux/sem_wait.c (__new_sem_wait): Likewise.
	* sysdeps/unix/sysv/linux/lowlevellock.c (__lll_lock_wait_private):
	New function.
	(__lll_lock_wait, __lll_timedlock_wait): Add private argument and
	pass it through to lll_futex_*wait, only compile in when
	IS_IN_libpthread.
	* sysdeps/unix/sysv/linux/lowlevelrobustlock.c
	(__lll_robust_lock_wait, __lll_robust_timedlock_wait): Add private
	argument and pass it through to lll_futex_*wait.
	* sysdeps/unix/sysv/linux/alpha/lowlevellock.h: Renamed all
	lll_mutex_* resp. lll_robust_mutex_* macros to lll_* resp.
	lll_robust_*.  Renamed all __lll_mutex_* resp. __lll_robust_mutex_*
	inline functions to __lll_* resp. __lll_robust_*.
	(LLL_MUTEX_LOCK_INITIALIZER): Remove.
	(lll_mutex_dead): Add private argument.
	(__lll_lock_wait_private): New prototype.
	(__lll_lock_wait, __lll_robust_lock_wait, __lll_lock_timedwait,
	__lll_robust_lock_timedwait): Add private argument to prototypes.
	(__lll_lock): Add private argument, if it is constant LLL_PRIVATE,
	call __lll_lock_wait_private, otherwise pass private to
	__lll_lock_wait.
	(__lll_robust_lock, __lll_cond_lock, __lll_timedlock,
	__lll_robust_timedlock): Add private argument, pass it to
	__lll_*wait functions.
	(__lll_unlock): Add private argument, if it is constant LLL_PRIVATE,
	call __lll_unlock_wake_private, otherwise pass private to
	__lll_unlock_wake.
	(__lll_robust_unlock): Add private argument, pass it to
	__lll_robust_unlock_wake.
	(lll_lock, lll_robust_lock, lll_cond_lock, lll_timedlock,
	lll_robust_timedlock, lll_unlock, lll_robust_unlock): Add private
	argument, pass it through to __lll_* inline function.
	(__lll_mutex_unlock_force, lll_mutex_unlock_force): Remove.
	(lll_lock_t): Remove.
	(__lll_cond_wait, __lll_cond_timedwait, __lll_cond_wake,
	__lll_cond_broadcast, lll_cond_wait, lll_cond_timedwait,
	lll_cond_wake, lll_cond_broadcast): Remove.
	* sysdeps/unix/sysv/linux/ia64/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/i386/lowlevellock.h: Allow including
	the header from assembler.  Renamed all lll_mutex_* resp.
	lll_robust_mutex_* macros to lll_* resp. lll_robust_*.
	(LOCK, FUTEX_CMP_REQUEUE, FUTEX_WAKE_OP,
	FUTEX_OP_CLEAR_WAKE_IF_GT_ONE): Define.
	(LLL_MUTEX_LOCK_INITIALIZER, LLL_MUTEX_LOCK_INITIALIZER_LOCKED,
	LLL_MUTEX_LOCK_INITIALIZER_WAITERS): Remove.
	(__lll_mutex_lock_wait, __lll_mutex_timedlock_wait,
	__lll_mutex_unlock_wake, __lll_lock_wait, __lll_unlock_wake):
	Remove prototype.
	(__lll_trylock_asm, __lll_lock_asm_start, __lll_unlock_asm): Define.
	(lll_robust_trylock, lll_cond_trylock): Use LLL_LOCK_INITIALIZER*
	rather than LLL_MUTEX_LOCK_INITIALIZER* macros.
	(lll_trylock): Likewise, use __lll_trylock_asm, pass
	MULTIPLE_THREADS_OFFSET as another asm operand.
	(lll_lock): Add private argument, use __lll_lock_asm_start, pass
	MULTIPLE_THREADS_OFFSET as last asm operand, call
	__lll_lock_wait_private if private is constant LLL_PRIVATE,
	otherwise pass private as another argument to __lll_lock_wait.
	(lll_robust_lock, lll_cond_lock, lll_robust_cond_lock,
	lll_timedlock, lll_robust_timedlock): Add private argument, pass
	private as another argument to __lll_*lock_wait call.
	(lll_unlock): Add private argument, use __lll_unlock_asm, pass
	MULTIPLE_THREADS_OFFSET as another asm operand, call
	__lll_unlock_wake_private if private is constant LLL_PRIVATE,
	otherwise pass private as another argument to __lll_unlock_wake.
	(lll_robust_unlock): Add private argument, pass private as another
	argument to __lll_unlock_wake.
	(lll_robust_dead): Add private argument, use __lll_private_flag
	macro.
	(lll_islocked): Use LLL_LOCK_INITIALIZER instead of
	LLL_MUTEX_LOCK_INITIALIZER.
	(lll_lock_t): Remove.
	(LLL_LOCK_INITIALIZER_WAITERS): Define.
	(__lll_cond_wait, __lll_cond_timedwait, __lll_cond_wake,
	__lll_cond_broadcast, lll_cond_wait, lll_cond_timedwait,
	lll_cond_wake, lll_cond_broadcast): Remove.
	* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/i386/i486/libc-lowlevellock.S: Revert
	2007-05-2{3,9} changes.
	* sysdeps/unix/sysv/linux/i386/i486/lowlevellock.S: Include
	kernel-features.h and lowlevellock.h.
	(LOAD_PRIVATE_FUTEX_WAIT): Define.
	(LOAD_FUTEX_WAIT): Rewritten.
	(LOCK, SYS_gettimeofday, SYS_futex, FUTEX_WAIT, FUTEX_WAKE): Don't
	define.
	(__lll_lock_wait_private, __lll_unlock_wake_private): New functions.
	(__lll_mutex_lock_wait): Rename to ...
	(__lll_lock_wait): ... this.  Take futex addr from %edx instead of
	%ecx, %ecx is now private argument.  Don't compile in for libc.so.
	(__lll_mutex_timedlock_wait): Rename to ...
	(__lll_timedlock_wait): ... this.  Use __NR_gettimeofday.  %esi
	contains private argument.  Don't compile in for libc.so.
	(__lll_mutex_unlock_wake): Rename to ...
	(__lll_unlock_wake): ... this.  %ecx contains private argument.
	Don't compile in for libc.so.
	(__lll_timedwait_tid): Use __NR_gettimeofday.
	* sysdeps/unix/sysv/linux/i386/i486/lowlevelrobustlock.S: Include
	kernel-features.h and lowlevellock.h.
	(LOAD_FUTEX_WAIT): Define.
	(LOCK, SYS_gettimeofday, SYS_futex, FUTEX_WAIT, FUTEX_WAKE): Don't
	define.
	(__lll_robust_mutex_lock_wait): Rename to ...
	(__lll_robust_lock_wait): ... this.  Futex addr is now in %edx
	argument, %ecx argument contains private.  Use LOAD_FUTEX_WAIT
	macro.
	(__lll_robust_mutex_timedlock_wait): Rename to ...
	(__lll_robust_timedlock_wait): ... this.  Use __NR_gettimeofday.
	%esi argument contains private, use LOAD_FUTEX_WAIT macro.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_barrier_wait.S: Include
	lowlevellock.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
	(pthread_barrier_wait): Rename __lll_mutex_* to __lll_*, pass
	PRIVATE(%ebx) ^ LLL_SHARED as private argument in %ecx to
	__lll_lock_wait and __lll_unlock_wake, pass MUTEX(%ebx) address
	to __lll_lock_wait in %edx.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S:
	Include lowlevellock.h and pthread-errnos.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_REQUEUE,
	FUTEX_CMP_REQUEUE, EINVAL, LOCK): Don't define.
	(__pthread_cond_broadcast): Rename __lll_mutex_* to __lll_*, pass
	cond_lock address in %edx rather than %ecx to __lll_lock_wait,
	pass LLL_SHARED in %ecx to both __lll_lock_wait and
	__lll_unlock_wake.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S:
	Include lowlevellock.h and pthread-errnos.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_WAKE_OP,
	FUTEX_OP_CLEAR_WAKE_IF_GT_ONE, EINVAL, LOCK): Don't define.
	(__pthread_cond_signal): Rename __lll_mutex_* to __lll_*, pass
	cond_lock address in %edx rather than %ecx to __lll_lock_wait,
	pass LLL_SHARED in %ecx to both __lll_lock_wait and
	__lll_unlock_wake.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S:
	Include lowlevellock.h.
	(SYS_futex, SYS_gettimeofday, FUTEX_WAIT, FUTEX_WAKE, LOCK):
	Don't define.
	(__pthread_cond_timedwait): Rename __lll_mutex_* to __lll_*, pass
	cond_lock address in %edx rather than %ecx to __lll_lock_wait,
	pass LLL_SHARED in %ecx to both __lll_lock_wait and
	__lll_unlock_wake.  Use __NR_gettimeofday.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S:
	Include lowlevellock.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
	(__pthread_cond_wait, __condvar_w_cleanup): Rename __lll_mutex_*
	to __lll_*, pass cond_lock address in %edx rather than %ecx to
	__lll_lock_wait, pass LLL_SHARED in %ecx to both __lll_lock_wait
	and __lll_unlock_wake.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_rwlock_rdlock.S:
	Include lowlevellock.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
	(__pthread_rwlock_rdlock): Rename __lll_mutex_* to __lll_*, pass
	MUTEX(%ebx) address in %edx rather than %ecx to
	__lll_lock_wait, pass PSHARED(%ebx) in %ecx to both __lll_lock_wait
	and __lll_unlock_wake.  Move return value from %ecx to %edx
	register.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_rwlock_timedrdlock.S:
	Include lowlevellock.h.
	(SYS_futex, SYS_gettimeofday, FUTEX_WAIT, FUTEX_WAKE, LOCK):
	Don't define.
	(__pthread_rwlock_wrlock): Rename __lll_mutex_* to __lll_*, pass
	MUTEX(%ebp) address in %edx rather than %ecx to
	__lll_lock_wait, pass PSHARED(%ebp) in %ecx to both __lll_lock_wait
	and __lll_unlock_wake.  Move return value from %ecx to %edx
	register.  Use __NR_gettimeofday.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_rwlock_timedwrlock.S:
	Include lowlevellock.h.
	(SYS_futex, SYS_gettimeofday, FUTEX_WAIT, FUTEX_WAKE, LOCK):
	Don't define.
	(__pthread_rwlock_wrlock): Rename __lll_mutex_* to __lll_*, pass
	MUTEX(%ebp) address in %edx rather than %ecx to
	__lll_lock_wait, pass PSHARED(%ebp) in %ecx to both __lll_lock_wait
	and __lll_unlock_wake.  Move return value from %ecx to %edx
	register.  Use __NR_gettimeofday.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_rwlock_unlock.S:
	Include lowlevellock.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
	(__pthread_rwlock_unlock): Rename __lll_mutex_* to __lll_*, pass
	MUTEX(%edi) address in %edx rather than %ecx to
	__lll_lock_wait, pass PSHARED(%edi) in %ecx to both __lll_lock_wait
	and __lll_unlock_wake.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_rwlock_wrlock.S:
	Include lowlevellock.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
	(__pthread_rwlock_wrlock): Rename __lll_mutex_* to __lll_*, pass
	MUTEX(%ebx) address in %edx rather than %ecx to
	__lll_lock_wait, pass PSHARED(%ebx) in %ecx to both __lll_lock_wait
	and __lll_unlock_wake.  Move return value from %ecx to %edx
	register.
	* sysdeps/unix/sysv/linux/i386/pthread_once.S: Include
	lowlevellock.h.
	(LOCK, SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG): Don't
	define.
	* sysdeps/unix/sysv/linux/i386/i486/sem_post.S: Include lowlevellock.h.
	(LOCK, SYS_futex, FUTEX_WAKE): Don't define.
	* sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Include
	lowlevellock.h.
	(LOCK, SYS_futex, SYS_gettimeofday, FUTEX_WAIT): Don't define.
	(sem_timedwait): Use __NR_gettimeofday.
	* sysdeps/unix/sysv/linux/i386/i486/sem_trywait.S: Include
	lowlevellock.h.
	(LOCK): Don't define.
	* sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Include
	lowlevellock.h.
	(LOCK, SYS_futex, FUTEX_WAIT): Don't define.
	* sysdeps/unix/sysv/linux/powerpc/sem_post.c: Wake only when there
	are waiters.
	* sysdeps/unix/sysv/linux/x86_64/libc-lowlevellock.S: Revert
	2007-05-2{3,9} changes.
	* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Include
	kernel-features.h and lowlevellock.h.
	(LOAD_PRIVATE_FUTEX_WAIT): Define.
	(LOAD_FUTEX_WAIT): Rewritten.
	(LOCK, SYS_futex, FUTEX_WAIT, FUTEX_WAKE): Don't define.
	(__lll_lock_wait_private, __lll_unlock_wake_private): New functions.
	(__lll_mutex_lock_wait): Rename to ...
	(__lll_lock_wait): ... this.  %esi is now private argument.
	Don't compile in for libc.so.
	(__lll_mutex_timedlock_wait): Rename to ...
	(__lll_timedlock_wait): ... this.  %esi contains private argument.
	Don't compile in for libc.so.
	(__lll_mutex_unlock_wake): Rename to ...
	(__lll_unlock_wake): ... this.  %esi contains private argument.
	Don't compile in for libc.so.
	* sysdeps/unix/sysv/linux/x86_64/lowlevelrobustlock.S: Include
	kernel-features.h and lowlevellock.h.
	(LOAD_FUTEX_WAIT): Define.
	(LOCK, SYS_futex, FUTEX_WAIT, FUTEX_WAKE): Don't define.
	(__lll_robust_mutex_lock_wait): Rename to ...
	(__lll_robust_lock_wait): ... this.  %esi argument contains private.
	Use LOAD_FUTEX_WAIT macro.
	(__lll_robust_mutex_timedlock_wait): Rename to ...
	(__lll_robust_timedlock_wait): ... this. %esi argument contains
	private, use LOAD_FUTEX_WAIT macro.
	* sysdeps/unix/sysv/linux/x86_64/pthread_barrier_wait.S: Include
	lowlevellock.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
	(pthread_barrier_wait): Rename __lll_mutex_* to __lll_*, pass
	PRIVATE(%rdi) ^ LLL_SHARED as private argument in %esi to
	__lll_lock_wait and __lll_unlock_wake.
	* sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S:
	Include lowlevellock.h and pthread-errnos.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_REQUEUE,
	FUTEX_CMP_REQUEUE, EINVAL, LOCK): Don't define.
	(__pthread_cond_broadcast): Rename __lll_mutex_* to __lll_*,
	pass LLL_SHARED in %esi to both __lll_lock_wait and
	__lll_unlock_wake.
	* sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S:
	Include lowlevellock.h and pthread-errnos.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_WAKE_OP,
	FUTEX_OP_CLEAR_WAKE_IF_GT_ONE, EINVAL, LOCK): Don't define.
	(__pthread_cond_signal): Rename __lll_mutex_* to __lll_*,
	pass LLL_SHARED in %esi to both __lll_lock_wait and
	__lll_unlock_wake.
	* sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:
	Include lowlevellock.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
	(__pthread_cond_timedwait): Rename __lll_mutex_* to __lll_*,
	pass LLL_SHARED in %esi to both __lll_lock_wait and
	__lll_unlock_wake.
	* sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:
	Include lowlevellock.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, LOCK): Don't define.
	(__pthread_cond_wait, __condvar_cleanup): Rename __lll_mutex_*
	to __lll_*, pass LLL_SHARED in %esi to both __lll_lock_wait
	and __lll_unlock_wake.
	* sysdeps/unix/sysv/linux/x86_64/pthread_rwlock_rdlock.S:
	Include lowlevellock.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG, LOCK):
	Don't define.
	(__pthread_rwlock_rdlock): Rename __lll_mutex_* to __lll_*,
	pass PSHARED(%rdi) in %esi to both __lll_lock_wait
	and __lll_unlock_wake.
	* sysdeps/unix/sysv/linux/x86_64/pthread_rwlock_timedrdlock.S:
	Include lowlevellock.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG, LOCK):
	Don't define.
	(__pthread_rwlock_wrlock): Rename __lll_mutex_* to __lll_*,
	pass PSHARED(%rdi) in %esi to both __lll_lock_wait
	and __lll_unlock_wake.
	* sysdeps/unix/sysv/linux/x86_64/pthread_rwlock_timedwrlock.S:
	Include lowlevellock.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG, LOCK):
	Don't define.
	(__pthread_rwlock_wrlock): Rename __lll_mutex_* to __lll_*,
	pass PSHARED(%rdi) in %esi to both __lll_lock_wait
	and __lll_unlock_wake.
	* sysdeps/unix/sysv/linux/x86_64/pthread_rwlock_unlock.S:
	Include lowlevellock.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG, LOCK):
	Don't define.
	(__pthread_rwlock_unlock): Rename __lll_mutex_* to __lll_*,
	pass PSHARED(%rdi) in %esi to both __lll_lock_wait
	and __lll_unlock_wake.
	* sysdeps/unix/sysv/linux/x86_64/pthread_rwlock_wrlock.S:
	Include lowlevellock.h.
	(SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG, LOCK):
	Don't define.
	(__pthread_rwlock_wrlock): Rename __lll_mutex_* to __lll_*,
	pass PSHARED(%rdi) in %ecx to both __lll_lock_wait
	and __lll_unlock_wake.
	* sysdeps/unix/sysv/linux/x86_64/pthread_once.S: Include
	lowlevellock.h.
	(LOCK, SYS_futex, FUTEX_WAIT, FUTEX_WAKE, FUTEX_PRIVATE_FLAG): Don't
	define.
	* sysdeps/unix/sysv/linux/x86_64/sem_post.S: Include lowlevellock.h.
	(LOCK, SYS_futex, FUTEX_WAKE): Don't define.
	* sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Include
	lowlevellock.h.
	(LOCK, SYS_futex, FUTEX_WAIT): Don't define.
	* sysdeps/unix/sysv/linux/x86_64/sem_trywait.S: Include
	lowlevellock.h.
	(LOCK): Don't define.
	* sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Include
	lowlevellock.h.
	(LOCK, SYS_futex, FUTEX_WAIT): Don't define.
	* sysdeps/unix/sysv/linux/sparc/internaltypes.h: New file.
	* sysdeps/unix/sysv/linux/sparc/pthread_barrier_destroy.c: New file.
	* sysdeps/unix/sysv/linux/sparc/pthread_barrier_init.c: New file.
	* sysdeps/unix/sysv/linux/sparc/pthread_barrier_wait.c: New file.
	* sysdeps/unix/sysv/linux/sparc/sparc32/lowlevellock.c
	(__lll_lock_wait_private): New function.
	(__lll_lock_wait, __lll_timedlock_wait): Add private argument, pass
	it to lll_futex_*wait.  Don't compile in for libc.so.
	* sysdeps/unix/sysv/linux/sparc/sparc32/pthread_barrier_init.c:
	Remove.
	* sysdeps/unix/sysv/linux/sparc/sparc32/pthread_barrier_wait.c
	(struct sparc_pthread_barrier): Remove.
	(pthread_barrier_wait): Use union sparc_pthread_barrier instead of
	struct sparc_pthread_barrier.  Pass
	ibarrier->s.pshared ? LLL_SHARED : LLL_PRIVATE to lll_{,un}lock
	and lll_futex_wait macros.
	* sysdeps/unix/sysv/linux/sparc/sparc32/sparcv9/pthread_barrier_init.c:
	Remove.
	* sysdeps/unix/sysv/linux/sparc/sparc32/sparcv9/pthread_barrier_wait.c:
	Include sparc pthread_barrier_wait.c instead of generic one.
2007-08-01 04:47:26 +00:00
Ulrich Drepper
991fa82be5 * sysdeps/i386/tls.h (THREAD_GSCOPE_RESET_FLAG): Use explicit
insn suffix.
	(THREAD_GSCOPE_GET_FLAG): Remove.
	* sysdeps/x86_64/tls.h (THREAD_GSCOPE_GET_FLAG): Remove.
	* allocatestack.c (__wait_lookup_done): Revert 2007-05-24
	changes.
	* sysdeps/powerpc/tls.h (tcbhead_t): Remove gscope_flag.
	(THREAD_GSCOPE_GET_FLAG): Remove.
	(THREAD_GSCOPE_RESET_FLAG): Use THREAD_SELF->header.gscope_flag
	instead of THREAD_GSCOPE_GET_FLAG.
	(THREAD_GSCOPE_SET_FLAG): Likewise.  Add atomic_write_barrier after
	it.
	* sysdeps/s390/tls.h (THREAD_GSCOPE_FLAG_UNUSED,
	THREAD_GSCOPE_FLAG_USED, THREAD_GSCOPE_FLAG_WAIT,
	THREAD_GSCOPE_RESET_FLAG, THREAD_GSCOPE_SET_FLAG,
	THREAD_GSCOPE_WAIT): Define.
	* sysdeps/sparc/tls.h (THREAD_GSCOPE_FLAG_UNUSED,
	THREAD_GSCOPE_FLAG_USED, THREAD_GSCOPE_FLAG_WAIT,
	THREAD_GSCOPE_RESET_FLAG, THREAD_GSCOPE_SET_FLAG,
	THREAD_GSCOPE_WAIT): Define.
	* sysdeps/sh/tls.h (THREAD_GSCOPE_FLAG_UNUSED,
	THREAD_GSCOPE_FLAG_USED, THREAD_GSCOPE_FLAG_WAIT,
	THREAD_GSCOPE_RESET_FLAG, THREAD_GSCOPE_SET_FLAG,
	THREAD_GSCOPE_WAIT): Define.
	* sysdeps/ia64/tls.h (THREAD_GSCOPE_FLAG_UNUSED,
	THREAD_GSCOPE_FLAG_USED, THREAD_GSCOPE_FLAG_WAIT,
	THREAD_GSCOPE_RESET_FLAG, THREAD_GSCOPE_SET_FLAG,
	THREAD_GSCOPE_WAIT): Define.

2007-05-24  Richard Henderson  <rth@redhat.com>

	* descr.h (struct pthread): Add header.gscope_flag.
	* sysdeps/alpha/tls.h (THREAD_GSCOPE_FLAG_UNUSED,
	THREAD_GSCOPE_FLAG_USED, THREAD_GSCOPE_FLAG_WAIT,
	THREAD_GSCOPE_RESET_FLAG, THREAD_GSCOPE_SET_FLAG,
	THREAD_GSCOPE_WAIT): Define.
2007-05-28 16:42:08 +00:00
Ulrich Drepper
6df7ffad19 * sysdeps/unix/sysv/linux/powerpc/libc-start.c: Include <sysdep.h>. 2007-05-26 20:13:27 +00:00
Ulrich Drepper
341c566f05 * sysdeps/unix/sysv/linux/tst-getcpu.c: New file.
* sysdeps/unix/sysv/linux/Makefile [subdir=posix] (tests): Add
	tst-getcpu.

	* include/link.h: Move l_version and l_nversion members around to
	fill gaps.
2007-05-11 06:39:07 +00:00
Ulrich Drepper
11bf311edc [BZ #2510, BZ #2830, BZ #3137, BZ #3313, BZ #3426, BZ #3465, BZ #3480, BZ #3483, BZ #3493, BZ #3514, BZ #3515, BZ #3664, BZ #3673, BZ #3674]
2007-01-11  Jakub Jelinek  <jakub@redhat.com>
	* sysdeps/i386/soft-fp/sfp-machine.h: Remove.
	* sysdeps/x86_64/soft-fp/sfp-machine.h: Likewise.
2007-01-10  Ulrich Drepper  <drepper@redhat.com>
	* io/fts.c: Make sure fts_cur is always valid after return from
	fts_read.
	Patch by Miloslav Trmac <mitr@redhat.com>.
2006-10-27  Richard Sandiford  <richard@codesourcery.com>
	* elf/elf.h (R_MIPS_GLOB_DAT): Define.
	(R_MIPS_NUM): Bump by 1.
2007-01-03  Jakub Jelinek  <jakub@redhat.com>
	* posix/execvp.c: Include alloca.h.
	(allocate_scripts_argv): Renamed to...
	(scripts_argv): ... this.  Don't allocate buffer here nor count
	arguments.
	(execvp): Use alloca if possible.
	* posix/Makefile: Add rules to build and run tst-vfork3 test.
	* posix/tst-vfork3.c: New test.
	* stdlib/Makefile (tst-strtod3-ENV): Define.
2007-01-02  Ulrich Drepper  <drepper@redhat.com>
	* posix/getconf.c: Update copyright year.
	* nss/getent.c: Likewise.
	* iconv/iconvconfig.c: Likewise.
	* iconv/iconv_prog.c: Likewise.
	* elf/ldconfig.c: Likewise.
	* catgets/gencat.c: Likewise.
	* csu/version.c: Likewise.
	* elf/ldd.bash.in: Likewise.
	* elf/sprof.c (print_version): Likewise.
	* locale/programs/locale.c: Likewise.
	* locale/programs/localedef.c: Likewise.
	* nscd/nscd.c (print_version): Likewise.
	* debug/xtrace.sh: Likewise.
	* malloc/memusage.sh: Likewise.
	* malloc/mtrace.pl: Likewise.
	* debug/catchsegv.sh: Likewise.
2006-12-24  Ulrich Drepper  <drepper@redhat.com>
	* malloc/malloc.c (sYSMALLOc): Remove some unnecessary alignment
	attempts.
2006-12-23  Ulrich Drepper  <drepper@redhat.com>
	* posix/wordexp.c: Remove some unnecessary tests.
2006-12-20  SUGIOKA Toshinobu  <sugioka@itonet.co.jp>

	* sysdeps/unix/sysv/linux/sh/bits/shm.h: New file.

	* nss/getXXbyYY_r.c: Include atomic.h.
	(INTERNAL (REENTRANT_NAME)): Write startp after start_fct,
	add atomic_write_barrier () in between.

2006-11-28  Jakub Jelinek  <jakub@redhat.com>
	* elf/dl-support.c: Include dl-procinfo.h.
	* sysdeps/powerpc/dl-procinfo.h (PPC_PLATFORM_POWER4,
	PPC_PLATFORM_PPC970, PPC_PLATFORM_POWER5, PPC_PLATFORM_POWER5_PLUS,
	PPC_PLATFORM_POWER6, PPC_PLATFORM_CELL_BE, PPC_PLATFORM_POWER6X):
	Define.
	(_dl_string_platform): Use PPC_PLATFORM_* macros instead of
	hardcoded constants.
	* sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_platform): Use
	PPC_PLATFORM_* macros for array designators.
2006-11-11  Steven Munroe  <sjmunroe@us.ibm.com>
	* sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_cap_flags): Add 3 new cap
	names to the beginning.
	(_dl_powerpc_platforms): Add "power6x".
	* sysdeps/powerpc/dl-procinfo.h (_DL_HWCAP_FIRST): Decrease.
	(HWCAP_IMPORTANT): Add PPC_FEATURE_HAS_DFP.
	(_DL_PLATFORMS_COUNT): Increase.
	(_dl_string_platform): Handle power6x case.
	* sysdeps/powerpc/sysdep.h (PPC_FEATURE_PA6T, PPC_FEATURE_HAS_DFP,
	PPC_FEATURE_POWER6_EXT): Define.
	(PPC_FEATURE_POWER5, PPC_FEATURE_POWER5_PLUS): Correct Comment.
	[-2^31 .. 2^31) range.
	* sysdeps/unix/sysv/linux/bits/statvfs.h: Define ST_RELATIME.
	* sysdeps/unix/sysv/linux/internal_statvfs.c (__statvfs_getflags):
	Handle relatime mount option.

2006-12-13  Jakub Jelinek  <jakub@redhat.com>
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext.S: Include
	kernel-features.h.

2006-12-11  Ulrich Drepper  <drepper@redhat.com>

	* stdlib/strtod_l.c (____STRTOF_INTERNAL): Parse thousand
	separators also if no non-zero digits found.
	* stdlib/Makefile (tests): Add tst-strtod3.
	[BZ #3664]
	* stdlib/strtod_l.c (____STRTOF_INTERNAL): Fix test to recognize
	empty parsed strings.
	* stdlib/Makefile (tests): Add tst-strtod2.
	* stdlib/tst-strtod2.c: New file.

	[BZ #3673]
	* stdlib/strtod_l.c (____STRTOF_INTERNAL): Fix exp_limit
	computation.
	* stdlib/Makefile (tests): Add tst-atof2.
	* stdlib/tst-atof2.c: New file.

	[BZ #3674]
	* stdlib/strtod_l.c (____STRTOF_INTERNAL): Adjust exponent value
	correctly if removing trailing zero of hex-float.
	* stdlib/Makefile (tests): Add tst-atof1.
	* stdlib/tst-atof1.c: New file.

	* misc/mntent_r.c (__hasmntopt): Check p[optlen] even when p == rest.
	Start searching for next comma at p rather than rest.
	* misc/Makefile (tests): Add tst-mntent2.
	* misc/tst-mntent2.c: New test.

2006-12-08  Ulrich Drepper  <drepper@redhat.com>
	* malloc/memusage.c: Handle realloc with new size of zero and
	non-NULL pointer correctly.
	(me): Really write first record twice.
	(struct entry): Make format bi-arch safe.
	(dest): Write out more realloc statistics.
	* malloc/memusagestat.c (struct entry): Make format bi-arch safe.
2006-12-05  Jakub Jelinek  <jakub@redhat.com>
	* nis/nis_subr.c (nis_getnames): Revert last change.
2006-12-03  Kaz Kojima  <kkojima@rr.iij4u.or.jp>
	* sysdeps/unix/sysv/linux/sh/sys/io.h: Removed.
2006-11-30  H.J. Lu  <hongjiu.lu@intel.com>
	* sysdeps/i386/i686/memcmp.S: Use jump table as the base of
	jump table entries.

2006-11-30  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* sysdeps/unix/sysv/linux/i386/clone.S: Provide CFI for the outermost
	`clone' function to ensure proper unwinding stop of gdb.
	* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.

2006-12-01  Ulrich Drepper  <drepper@redhat.com>

	* nscd/nscd.init: Remove obsolete and commented-out -S option
	handling.

2006-11-23  Jakub Jelinek  <jakub@redhat.com>

	[BZ #3514]
	* manual/string.texi (strncmp): Fix pastos from wcscmp description.

	[BZ #3515]
	* manual/string.texi (strtok): Remove duplicate paragraph.

2006-12-01  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* sysdeps/unix/sysv/linux/x86_64/sigaction.c: Fix compatibility with
	libgcc not supporting `rflags' unwinding (register # >= 17).

2006-11-30  Jakub Jelinek  <jakub@redhat.com>

	* sunrpc/svc_run.c (svc_run): Set my_pollfd to new_pollfd if realloc
	succeeded.

2006-11-29  Daniel Jacobowitz  <dan@codesourcery.com>
	    Jakub Jelinek  <jakub@redhat.com>
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	* sysdeps/unix/sysv/linux/x86_64/sigaction.c (restore_rt): Add correct
	unwind information.
	* sysdeps/unix/sysv/linux/x86_64/Makefile: Provide symbols for
	'restore_rt' even in the 'signal' directory.
	* sysdeps/unix/sysv/linux/x86_64/ucontext_i.sym: Extend the regs list.
	malloc crashed.  Don't allocate memory unnecessarily in each
	loop.
2006-10-21  Jakub Jelinek  <jakub@redhat.com>
	* resolv/mapv4v6addr.h (map_v4v6_address): Fix last change.
2006-11-20  Ulrich Drepper  <drepper@redhat.com>
	* resolv/mapv4v6addr.h (map_v4v6_address): Optimize a bit.
2006-11-18  Bruno Haible  <bruno@clisp.org>
	* sysdeps/unix/sysv/linux/i386/getgroups.c (__getgroups): Invoke
	__sysconf only after having tried to call getgroups32.
2006-11-19  Ulrich Drepper  <drepper@redhat.com>
	* nss/nss_files/files-hosts.c (LINE_PARSER): Support IPv6-style
	addresses for IPv4 queries if they can be mapped.
2006-11-16  Jakub Jelinek  <jakub@redhat.com>
	* sysdeps/x86_64/fpu/s_copysignf.S (__copysignf): Switch to .text.
	* sysdeps/x86_64/fpu/s_copysign.S (__copysign): Likewise.
	(signmask): Add .size directive.
	(othermask): Add .type directive.
2006-11-14  Ulrich Drepper  <drepper@redhat.com>
	* po/nl.po: Update from translation team.
	* timezone/zdump.c: Redo fix for BZ #3137.
2006-11-14  Jakub Jelinek  <jakub@redhat.com>
	* nss/nss_files/files-alias.c (get_next_alias): Set line back
	to first_unused after parsing :include: file.
	* timezone/africa: Update from tzdata2006o.
	* timezone/antarctica: Likewise.
	* timezone/asia: Likewise.
	* timezone/australasia: Likewise.
	* timezone/backward: Likewise.
	* timezone/europe: Likewise.
	* timezone/iso3166.tab: Likewise.
	* timezone/northamerica: Likewise.
	* timezone/southamerica: Likewise.
	* timezone/zone.tab: Likewise.

	* time/tzfile.c (__tzfile_read): Extend to handle new file format
	on machines with 64-bit time_t.

	* timezone/checktab.awk: Update from tzcode2006o.
	* timezone/ialloc.c: Likewise.
	* timezone/private.h: Likewise.
	* timezone/scheck.c: Likewise.
	* timezone/tzfile.h: Likewise.
	* timezone/tzselect.ksh: Likewise.
	* timezone/zdump.c: Likewise.
	* timezone/zic.c: Likewise.

	[BZ #3483]
	* elf/ldconfig.c (main): Call setlocale and textdomain.
	Patch mostly by Benno Schulenberg <bensberg@justemail.net>.

	[BZ #3480]
	* manual/argp.texi: Fix typos.
	* manual/charset.texi: Likewise.
	* manual/errno.texi: Likewise.
	* manual/filesys.texi: Likewise.
	* manual/lang.texi: Likewise.
	* manual/maint.texi: Likewise.
	* manual/memory.texi: Likewise.
	* manual/message.texi: Likewise.
	* manual/resource.texi: Likewise.
	* manual/search.texi: Likewise.
	* manual/signal.texi: Likewise.
	* manual/startup.texi: Likewise.
	* manual/stdio.texi: Likewise.
	* manual/sysinfo.texi: Likewise.
	* manual/syslog.texi: Likewise.
	* manual/time.texi: Likewise.
	Patch by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>.

	[BZ #3465]
	* sunrpc/clnt_raw.c: Minimal message improvements.
	* sunrpc/pm_getmaps.c: Likewise.
	* nis/nss_nisplus/nisplus-publickey.c: Likewise.
	* nis/nis_print_group_entry.c: Likewise.
	* locale/programs/repertoire.c: Likewise.
	* locale/programs/charmap.c: Likewise.
	* malloc/memusage.sh: Likewise.
	* elf/dl-deps.c: Likewise.
	* locale/programs/ld-collate.c: Likewise.
	* libio/vswprintf.c: Likewise.
	* malloc/memusagestat.c: Likewise.
	* sunrpc/auth_unix.c: Likewise.
	* sunrpc/rpc_main.c: Likewise.
	* nscd/cache.c: Likewise.
	* locale/programs/repertoire.c: Unify output messages.
	* locale/programs/charmap.c: Likewise.
	* locale/programs/ld-ctype.c: Likewise.
	* locale/programs/ld-monetary.c: Likewise.
	* locale/programs/ld-numeric.c: Likewise.
	* locale/programs/ld-time.c: Likewise.
	* elf/ldconfig.c: Likewise.
	* nscd/selinux.c: Likewise.
	* elf/cache.c: Likewise.
	Patch mostly by Benno Schulenberg <bensberg@justemail.net>.

2006-11-10  Jakub Jelinek  <jakub@redhat.com>

	* string/strxfrm_l.c (STRXFRM): Fix trailing \1 optimization
	if N is one bigger than return value.
	* string/tst-strxfrm2.c (do_test): Also test strxfrm with l1 + 1
	and l1 last arguments, if buf is defined, verify the return value
	equals to strlen (buf) and verify no byte beyond passed length
	is modified.

2006-11-10  Ulrich Drepper  <drepper@redhat.com>

	* po/sv.po: Update from translation team.

	* sysdeps/gnu/siglist.c (__old_sys_siglist, __old_sys_sigabbrev):
	Use __new_sys_siglist instead of _sys_siglist_internal as
	second macro argument.
	(_old_sys_siglist): Use declare_symbol_alias macro instead of
	strong_alias.
2006-11-09  Ulrich Drepper  <drepper@redhat.com>

	[BZ #3493]
	* posix/unistd.h (sysconf): Remove const attribute.

	* sysdeps/posix/getaddrinfo.c (getaddrinfo): Fix test for
	temporary or deprecated addresses.
	Patch by Sridhar Samudrala <sri@us.ibm.com>.

	* string/Makefile (tests): Add tst-strxfrm2.
	* string/tst-strxfrm2.c: New file.

2006-10-09  Jakub Jelinek  <jakub@redhat.com>

	* elf/dl-debug.c (_dl_debug_initialize): Check r->r_map for 0
	rather than r->r_brk.
	* string/strxfrm_l.c (STRXFRM): Do the trailing \1 removal
	optimization even if needed > n.

2006-11-07  Jakub Jelinek  <jakub@redhat.com>

	* include/libc-symbols.h (declare_symbol): Rename to...
	(declare_symbol_alias): ... this.  Add ORIGINAL argument, imply
	strong_alias (ORIGINAL, SYMBOL) in asm to make sure it preceedes
	.size directive.
	* sysdeps/gnu/errlist-compat.awk: Adjust for declare_symbol_alias
	changes.
	* sysdeps/gnu/siglist.c: Likewise.

2006-11-03  Steven Munroe  <sjmunroe@us.ibm.com>

	* sysdeps/powerpc/fpu/bits/mathinline.h
	[__LIBC_INTERNAL_MATH_INLINES]: Moved to ...
	* sysdeps/powerpc/fpu/math_private.h: ...here.  New file.

2006-11-05  Ulrich Drepper  <drepper@redhat.com>

	* sysdeps/unix/sysv/linux/i386/sysconf.c (intel_check_word):
	Update handling of cache descriptor 0x49 for new models.
	* sysdeps/unix/sysv/linux/x86_64/sysconf.c (intel_check_word):
	Likewise.

2006-11-02  Ulrich Drepper  <drepper@redhat.com>

	* configure.in: Work around ld --help change and avoid -z relro
	test completely if the architecture doesn't care about security.

2006-11-01  Ulrich Drepper  <drepper@redhat.com>

	* po/sv.po: Update from translation team.

2006-10-31  Ulrich Drepper  <drepper@redhat.com>

	* stdlib/atexit.c (atexit): Don't mark as hidden when used to
	generate compatibility version.

2006-10-29  Ulrich Drepper  <drepper@redhat.com>

	* configure.in: Relax -z relro requirement a bit.

	* po/sv.po: Update from translation team.

2006-10-29  Jakub Jelinek  <jakub@redhat.com>

	* elf/dl-sym.c (do_sym): Use RTLD_SINGLE_THREAD_P.
	* elf/dl-runtime.c (_dl_fixup, _dl_profile_fixup): Likewise.
	* elf/dl-close.c (_dl_close_worker): Likewise.
	* elf/dl-open.c (_dl_open_worker): Likewise.
	* sysdeps/generic/sysdep-cancel.h (RTLD_SINGLE_THREAD_P): Define.

	* configure.in: Require assembler support for visibility, compiler
	support for visibility and aliases, linker support for various -z
	options.
	* Makeconfig: Remove conditional code which now is unnecessary.
	* config.h.in: Likewise.
	* config.make.in: Likewise.
	* dlfcn/Makefile: Likewise.
	* elf/Makefile: Likewise.
	* elf/dl-load.c: Likewise.
	* elf/rtld.c: Likewise.
	* include/libc-symbols.h: Likewise.
	* include/stdio.h: Likewise.
	* io/Makefile: Likewise.
	* io/fstat.c: Likewise.
	* io/fstat64.c: Likewise.
	* io/fstatat.c: Likewise.
	* io/fstatat64.c: Likewise.
	* io/lstat.c: Likewise.
	* io/lstat64.c: Likewise.
	* io/mknod.c: Likewise.
	* io/mknodat.c: Likewise.
	* io/stat.c: Likewise.
	* io/stat64.c: Likewise.
	* libio/stdio.c: Likewise.
	* nscd/Makefile: Likewise.
	* stdlib/Makefile: Likewise.
	* stdlib/atexit.c: Likewise.
	* sysdeps/generic/ldsodefs.h: Likewise.
	* sysdeps/i386/dl-machine.h: Likewise.
	* sysdeps/i386/sysdep.h: Likewise.
	* sysdeps/i386/i686/memcmp.S: Likewise.
	* sysdeps/powerpc/powerpc32/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/i386/sigaction.c: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/sigaction.c: Likewise.

	* Makerules: USE_TLS support is now default.
	* tls.make.c: Likewise.
	* csu/Versions: Likewise.
	* csu/libc-start.c: Likewise.
	* csu/libc-tls.c: Likewise.
	* csu/version.c: Likewise.
	* dlfcn/dlinfo.c: Likewise.
	* elf/dl-addr.c: Likewise.
	* elf/dl-cache.c: Likewise.
	* elf/dl-close.c: Likewise.
	* elf/dl-iteratephdr.c: Likewise.
	* elf/dl-load.c: Likewise.
	* elf/dl-lookup.c: Likewise.
	* elf/dl-object.c: Likewise.
	* elf/dl-open.c: Likewise.
	* elf/dl-reloc.c: Likewise.
	* elf/dl-support.c: Likewise.
	* elf/dl-sym.c: Likewise.
	* elf/dl-sysdep.c: Likewise.
	* elf/dl-tls.c: Likewise.
	* elf/ldconfig.c: Likewise.
	* elf/rtld.c: Likewise.
	* elf/tst-tls-dlinfo.c: Likewise.
	* elf/tst-tls1.c: Likewise.
	* elf/tst-tls10.h: Likewise.
	* elf/tst-tls14.c: Likewise.
	* elf/tst-tls2.c: Likewise.
	* elf/tst-tls3.c: Likewise.
	* elf/tst-tls4.c: Likewise.
	* elf/tst-tls5.c: Likewise.
	* elf/tst-tls6.c: Likewise.
	* elf/tst-tls7.c: Likewise.
	* elf/tst-tls8.c: Likewise.
	* elf/tst-tls9.c: Likewise.
	* elf/tst-tlsmod1.c: Likewise.
	* elf/tst-tlsmod13.c: Likewise.
	* elf/tst-tlsmod13a.c: Likewise.
	* elf/tst-tlsmod14a.c: Likewise.
	* elf/tst-tlsmod2.c: Likewise.
	* elf/tst-tlsmod3.c: Likewise.
	* elf/tst-tlsmod4.c: Likewise.
	* elf/tst-tlsmod5.c: Likewise.
	* elf/tst-tlsmod6.c: Likewise.
	* include/errno.h: Likewise.
	* include/link.h: Likewise.
	* include/tls.h: Likewise.
	* locale/global-locale.c: Likewise.
	* locale/localeinfo.h: Likewise.
	* malloc/arena.c: Likewise.
	* malloc/hooks.c: Likewise.
	* malloc/malloc.c: Likewise.
	* resolv/Versions: Likewise.
	* sysdeps/alpha/dl-machine.h: Likewise.
	* sysdeps/alpha/libc-tls.c: Likewise.
	* sysdeps/generic/ldsodefs.h: Likewise.
	* sysdeps/generic/tls.h: Likewise.
	* sysdeps/i386/dl-machine.h: Likewise.
	* sysdeps/ia64/dl-machine.h: Likewise.
	* sysdeps/ia64/libc-tls.c: Likewise.
	* sysdeps/mach/hurd/fork.c: Likewise.
	* sysdeps/mach/hurd/i386/tls.h: Likewise.
	* sysdeps/powerpc/powerpc32/dl-machine.c: Likwise.
	* sysdeps/powerpc/powerpc32/dl-machine.h: Likewise.
	* sysdeps/powerpc/powerpc64/dl-machine.h: Likewise.
	* sysdeps/s390/libc-tls.c: Likewise.
	* sysdeps/s390/s390-32/dl-machine.h: Likewise.
	* sysdeps/s390/s390-64/dl-machine.h: Likewise.
	* sysdeps/sh/dl-machine.h: Likewise.
	* sysdeps/sparc/sparc32/dl-machine.h: Likewise.
	* sysdeps/sparc/sparc64/dl-machine.h: Likewise.
	* sysdeps/x86_64/dl-machine.h: Likewise.

	[BZ #3426]
	* stdlib/stdlib.h: Adjust comment for canonicalize_file_name to
	reality.

2006-10-27  Jakub Jelinek  <jakub@redhat.com>

	* elf/dl-lookup.c (_dl_debug_bindings): Remove unused symbol_scope
	argument.
	(_dl_lookup_symbol_x): Adjust caller.

	* sysdeps/generic/ldsodefs.h (struct link_namespaces): Remove
	_ns_global_scope.
	* elf/rtld.c (dl_main): Don't initialize _ns_global_scope.

	* elf/dl-libc.c: Revert l_scope name changes.
	* elf/dl-load.c: Likewise.
	* elf/dl-object.c: Likewise.
	* elf/rtld.c: Likewise.
	* elf/dl-close.c (_dl_close): Likewise.
	* elf/dl-open.c (dl_open_worker): Likewise.  If not SINGLE_THREAD_P,
	always use __rtld_mrlock_{change,done}.  Always free old scope list
	here if not l_scope_mem.
	* elf/dl-runtime.c (_dl_fixup, _dl_profile_fixup): Revert l_scope name
	change.  Never free scope list here.  Just __rtld_mrlock_lock before
	the lookup and __rtld_mrlock_unlock it after the lookup.
	* elf/dl-sym.c: Likewise.
	* include/link.h (struct r_scoperec): Remove.
	(struct link_map): Replace l_scoperec with l_scope, l_scoperec_mem
	with l_scope_mem and l_scoperec_lock with l_scope_lock.

2006-10-25  Ulrich Drepper  <drepper@redhat.com>

	* sysdeps/gnu/netinet/tcp.h: Define TCP_CONGESTION.

2006-10-18  Ulrich Drepper  <drepper@redhat.com>

	* configure.in: Disable building profile libraries by default.

2006-10-18  Ulrich Drepper  <drepper@redhat.com>

	* elf/dl-lookup.c (_dl_lookup_symbol_x): Add warning to
	_dl_lookup_symbol_x code.

2006-10-17  Jakub Jelinek  <jakub@redhat.com>

	* elf/dl-runtime.c: Include sysdep-cancel.h.
	(_dl_fixup, _dl_profile_fixup): Use __rtld_mrlock_* and
	scoperec->nusers only if !SINGLE_THREAD_P.  Use atomic_*
	instead of catomic_* macros.
	* elf/dl-sym.c: Include sysdep-cancel.h.
	(do_sym): Use __rtld_mrlock_* and scoperec->nusers only
	if !SINGLE_THREAD_P.  Use atomic_* instead of catomic_* macros.
	* elf/dl-close.c: Include sysdep-cancel.h.
	(_dl_close): Use __rtld_mrlock_* and scoperec->nusers only
	if !SINGLE_THREAD_P.  Use atomic_* instead of catomic_* macros.
	* elf/dl-open.c: Include sysdep-cancel.h.
	(dl_open_worker): Use __rtld_mrlock_* and scoperec->nusers only
	if !SINGLE_THREAD_P.  Use atomic_* instead of catomic_* macros.

2006-10-17  Jakub Jelinek  <jakub@redhat.com>

	[BZ #3313]
	* malloc/malloc.c (malloc_consolidate): Set maxfb to address of last
	fastbin rather than end of fastbin array.

2006-10-18  Ulrich Drepper  <drepper@redhat.com>

	* sysdeps/i386/i486/bits/atomic.h (catomic_decrement): Use correct
	body macro.
	* sysdeps/x86_64/bits/atomic.h
	(__arch_c_compare_and_exchange_val_64_acq): Add missing casts.
	(catomic_decrement): Use correct body macro.

2006-10-17  Jakub Jelinek  <jakub@redhat.com>

	* include/atomic.h: Add a unique prefix to all local variables
	in macros.
	* csu/tst-atomic.c (do_test): Test also catomic_* macros.

2006-10-14  Ulrich Drepper  <drepper@redhat.com>

	* resolv/arpa/nameser.h: Document that ns_t_a6 is deprecated.

	[BZ #3313]
	* malloc/malloc.c (malloc_consolidate): Don't use get_fast_max to
	determine highest fast bin to consolidate, always look into all of
	them.
	(do_check_malloc_state): Only require for empty bins for large
	sizes in main arena.

	* libio/stdio.h: Add more __wur attributes.

2006-11-12  Andreas Jaeger  <aj@suse.de>

	[BZ #2510]
	* manual/search.texi (Hash Search Function): Clarify.
	(Array Search Function): Clarify.

2006-11-12  Joseph Myers  <joseph@codesourcery.com>

	[BZ #2830]
	* math/atest-exp.c (main): Cast hex value to mp_limb_t before
	shifting.
	* math/atest-exp2.c (read_mpn_hex): Likewise.
	* math/atest-sincos.c (main): Likewise.

	* sysdeps/unix/sysv/linux/syscalls.list: Add epoll_pwait.
	* sysdeps/unix/sysv/linux/sys/epoll.h: Declare epoll_pwait.
	* sysdeps/unix/sysv/linux/Versions (libc): Add epoll_pwait for
	version GLIBC_2.6.
	* Versions.def: Add GLIBC_2.6 for libc.

	* sysdeps/i386/i486/bits/atomic.h: Add catomic_* support.

2006-10-11  Jakub Jelinek  <jakub@redhat.com>

	* malloc/malloc.c (_int_malloc): Remove unused any_larger variable.

	* nis/nis_defaults.c (__nis_default_access): Don't call getenv twice.

	* nis/nis_subr.c (nis_getnames): Use __secure_getenv instead of getenv.
	* sysdeps/generic/unsecvars.h: Add NIS_PATH.

2006-10-11  Ulrich Drepper  <drepper@redhat.com>

	* include/atomic.c: Define catomic_* operations.
	* sysdeps/x86_64/bits/atomic.h: Likewise.  Fix a few minor problems.
	* stdlib/cxa_finalize.c: Use catomic_* operations instead of atomic_*.
	* malloc/memusage.c: Likewise.
	* gmon/mcount.c: Likewise.
	* elf/dl-close.c: Likewise.
	* elf/dl-open.c: Likewise.
	* elf/dl-profile.c: Likewise.
	* elf/dl-sym.c: Likewise.
	* elf/dl-runtime.c: Likewise.
	* elf/dl-fptr.c: Likewise.
	* resolv/res_libc.c: Likewise.

2006-10-10  Roland McGrath  <roland@frob.com>
	* sysdeps/mach/hurd/utimes.c: Use a union to avoid an improper cast.
	* sysdeps/mach/hurd/futimes.c: Likewise.
	* sysdeps/mach/hurd/lutimes.c: Likewise.

2006-10-09  Ulrich Drepper  <drepper@redhat.com>
	    Jakub Jelinek  <jakub@redhat.com>

	Implement reference counting of scope records.
	* elf/dl-close.c (_dl_close): Remove all scopes from removed objects
	from the list in objects which remain.  Always allocate new scope
	record.
	* elf/dl-open.c (dl_open_worker): When growing array for scopes,
	don't resize, allocate a new one.
	* elf/dl-runtime.c: Update reference counters before using a scope
	array.
	* elf/dl-sym.c: Likewise.
	* elf/dl-libc.c: Adjust for l_scope name change.
	* elf/dl-load.c: Likewise.
	* elf/dl-object.c: Likewise.
	* elf/rtld.c: Likewise.
	* include/link.h: Include <rtld-lowlevel.h>.  Define struct
	r_scoperec.  Replace r_scope with pointer to r_scoperec structure.
	Add l_scoperec_lock.
	* sysdeps/generic/ldsodefs.h: Include <rtld-lowlevel.h>.
	* sysdeps/generic/rtld-lowlevel.h: New file.

	* include/atomic.h: Rename atomic_and to atomic_and_val and
	atomic_or to atomic_or_val.  Define new macros atomic_and and
	atomic_or which do not return values.
	* sysdeps/x86_64/bits/atomic.h: Define atomic_and and atomic_or.
	Various cleanups.
	* sysdeps/i386/i486/bits/atomic.h: Likewise.

	* po/sv.po: Update from translation team.

2006-10-07  Ulrich Drepper  <drepper@redhat.com>

	* Versions.def: Add GLIBC_2.6 to libpthread.

	* include/shlib-compat.h (SHLIB_COMPAT): Expand parameters before use.
	(versioned_symbol): Likewise.
	(compat_symbol): Likewise.

	* po/tr.po: Update from translation team.
	* nis/Banner: Removed.  It's been integral part forever and the
	author info is incomplete anyway.
	* libio/Banner: Likewise.

2006-10-06  Ulrich Drepper  <drepper@redhat.com>

	* version.h (VERSION): Bump to 2.5.90 for new development tree.
2007-01-11 21:51:07 +00:00
Jakub Jelinek
32c075e1f0 . 2007-07-31 13:33:18 +00:00
Ulrich Drepper
457b559e2e * sysdeps/posix/getaddrinfo.c (rfc3484_sort): Implement rule 4,
home addresses.
	* sysdeps/unix/sysv/linux/check_pf.c (make_request): Recognize
	IFA_F_HOMEADDRESS flag for interfaces.
	* include/ifaddrs.h (struct in6addrinfo): Define
	in6ai_homeaddress.
2006-09-24 17:14:11 +00:00
Ulrich Drepper
b051fc4438 [BZ #3124]
2006-09-05  Ulrich Drepper  <drepper@redhat.com>
	[BZ #3124]
	* descr.h (struct pthread): Add parent_cancelhandling.
	* sysdeps/pthread/createthread.c (create_thread): Pass parent
	cancelhandling value to child.
	* pthread_create.c (start_thread): If parent thread was canceled
	reset the SIGCANCEL mask.
	* Makefile (tests): Add tst-cancel25.
	* tst-cancel25.c: New file.
2006-09-05 17:18:23 +00:00
Ulrich Drepper
f17efcb43e * sysdeps/powerpc/powerpc32/dl-trampoline.S (_dl_runtime_resolve):
Don't clobber caller's LRSAVE.
	(_dl_prof_resolve): Likewise.
2006-08-14 23:11:18 +00:00
Ulrich Drepper
df47504c78 2006-07-28 Ulrich Drepper <drepper@redhat.com>
Jakub Jelinek  <jakub@redhat.com>

	* descr.h: Change ENQUEUE_MUTEX and DEQUEUE_MUTEX for bit 0
	notification of PI mutex.  Add ENQUEUE_MUTEX_PI.
	* pthreadP.h: Define PTHREAD_MUTEX_PI_* macros for PI mutex types.
	* pthread_mutex_setprioceilining.c: Adjust for mutex type name change.
	* pthread_mutex_init.c: Add support for priority inheritance mutex.
	* pthread_mutex_lock.c: Likewise.
	* pthread_mutex_timedlock.c: Likewise.
	* pthread_mutex_trylock.c: Likewise.
	* pthread_mutex_unlock.c: Likewise.
	* sysdeps/pthread/pthread_cond_broadcast.c: For PI mutexes wake
	all mutexes.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.c: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.c: Likewise.
	* sysdeps/unix/sysv/linux/pthread-pi-defines.sym: New file.
	* sysdeps/unix/sysv/linux/Makefile (gen-as-const-header): Add
	pthread-pi-defines.sym.
	* sysdeps/unix/sysv/linux/i386/lowlevellock.h: Define FUTEX_LOCK_PI,
	FUTEX_UNLOCK_PI, and FUTEX_TRYLOCK_PI.
	* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/bits/posix_opt.h: Define
	_POSIX_THREAD_PRIO_INHERIT to 200112L.
	* tst-mutex1.c: Adjust to allow use in PI mutex test.
	* tst-mutex2.c: Likewise.
	* tst-mutex3.c: Likewise.
	* tst-mutex4.c: Likewise.
	* tst-mutex5.c: Likewise.
	* tst-mutex6.c: Likewise.
	* tst-mutex7.c: Likewise.
	* tst-mutex7a.c: Likewise.
	* tst-mutex8.c: Likewise.
	* tst-mutex9.c: Likewise.
	* tst-robust1.c: Likewise.
	* tst-robust7.c: Likewise.
	* tst-robust8.c: Likewise.
	* tst-mutexpi1.c: New file.
	* tst-mutexpi2.c: New file.
	* tst-mutexpi3.c: New file.
	* tst-mutexpi4.c: New file.
	* tst-mutexpi5.c: New file.
	* tst-mutexpi6.c: New file.
	* tst-mutexpi7.c: New file.
	* tst-mutexpi7a.c: New file.
	* tst-mutexpi8.c: New file.
	* tst-mutexpi9.c: New file.
	* tst-robust1.c: New file.
	* tst-robust2.c: New file.
	* tst-robust3.c: New file.
	* tst-robust4.c: New file.
	* tst-robust5.c: New file.
	* tst-robust6.c: New file.
	* tst-robust7.c: New file.
	* tst-robust8.c: New file.
	* Makefile (tests): Add the new tests.

	* pthread_create.c (start_thread): Add some casts to avoid warnings.
	* pthread_mutex_destroy.c: Remove unneeded label.
2006-07-29 04:42:09 +00:00
Ulrich Drepper
0f6699ea05 * sysdeps/unix/sysv/linux/kernel-features.h: Add
__ASSUME_SET_ROBUST_LIST.
2006-03-28 04:25:17 +00:00