Expand the support infrastructure:
- Create $(complocaledir) in the testroot.pristine to support localedef.
- Add the variable $complocaledir to script support.
- Add the script command 'mkdirp'.
All localedef tests which run with default paths need to have the
$(complocaledir) created in testroot.pristine. The localedef binary
will not by itself create the default path, but it will write into
the path. By adding this we can simplify the localedef tests.
The variable $complocaledir is the value of the configured
$(complocaledir) which is the location of the compiled locales that
will be searched by the runtime by default.
The command mkdirp will be available in script setup and will
be equivalent to running `mkdir -p`.
The variable and command can be used to write more complex tests.
Reviewed-by: DJ Delorie <dj@redhat.com>
We no longer write manual ChangeLog entries since they are
auto-generated at release time. Drop dependency of the `make dist`
target on the file and document the fact that the latest ChangeLog
entries can be read in the highest numbered ChangeLog.N file in
ChangeLog.old.
The ChangeLog.old/ChangeLog.20 file for 2.31 will thus be generated
just before tagging a release.
Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Debugging programs that have been dynamically linked against an
uninstalled glibc requires unusual steps, such as letting gdb know where
the thread db library is located and explicitly calling the loader.
However, when the program under test is statically linked, these steps
are not required (as a matter of fact, using the dynamic loader to run a
statically linked program is wrong and will fail), and gdb should be
called the usual way.
This patch modifies debugglibc.sh so that it checks if the program under
test is statically linked, then runs the debugger appropriately.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Some test cases are meant to be ran inside the container infrastructure
and make check automatically runs them as such. However, running a
single test case in a container without make check is useful.
This patch adds a new --tool option to testrun.sh that makes this easy,
as well as it adds a new option (-c or --in-container) to debugglibc.sh,
which causes the program under test to be ran in a container (with
WAIT_FOR_DEBUGGER=1), then automatically attaches GDB to it.
Automatically detecting if a test case is supposed to be ran inside a
container is harder (if not impossible), as Carlos pointed out [1],
however, this patch makes it easier to do it manually:
Using testrun.sh with containerized test:
$ ./testrun.sh --tool=container /absolute/path/to/program
Using debugglibc.sh with containerized test:
$ ./debugglibc.sh -c /absolute/path/to/program
Note: running these commands with relative paths causes error and
warning messages to be displayed, although the test case might succeed.
For example, with relative path:
$ ./testrun.sh --tool=container elf/tst-ldconfig-bad-aux-cache
error: subprocess failed: execv
error: unexpected error output from subprocess
/sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory
info: f 0 1064 /var/cache/ldconfig/aux-cache 20 aux-cache
[...]
Whereas with absolute paths, the errors and warnings are gone:
$ ./testrun.sh --tool=container $PWD/elf/tst-ldconfig-bad-aux-cache
info: f 0 1064 /var/cache/ldconfig/aux-cache 20 aux-cache
[...]
[1] https://sourceware.org/ml/libc-alpha/2019-11/msg00873.html
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The `test' make target passes a trailing slash in the subdir argument. This
does not play well with elf/rtld-Rules which looks for `elf' without any
trailing slash, and therefore doesn't find a match when running an elf test
individually. This commit removes the trailing slash from the invocation.
Reviewed-by: DJ Delorie <dj@redhat.com>
The testroot does not have a gunzip command, so the charmap files
should not be installed gzipped else they cannot be used (and thus
tested). With this patch, installing with INSTALL_UNCOMPRESSED=yes
installs uncompressed charmaps instead.
Note that we must purge the $(symbolic_link_list) as it contains
references to $(DESTDIR), which we change during the testroot
installation.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch addresses an issue reported in
<https://sourceware.org/ml/libc-alpha/2019-07/msg00661.html> where the
creation of testroot.pristine, on encountering
LD_TRACE_LOADED_OBJECTS=1 of the form
libc.so.6 => /scratch/jmyers/glibc/mbs/obj/glibc-8-0-mips64-linux-gnu-x86_64-linux-gnu/default/libc.so.6 (0x772dd000)
/lib32/ld.so.1 => /scratch/jmyers/glibc/mbs/obj/glibc-8-0-mips64-linux-gnu-x86_64-linux-gnu/default/elf/ld.so.1 (0x7747b000)
tries to copy /lib32/ld.so.1 (which does not exist) into the testroot
instead of copying the path on the RHS of "=>", which does exist,
because the Makefile logic assumes that the path on such a line with
'/' should be copied, when if there are such paths on both the LHS and
the RHS of "=>", only the one on the RHS necessarily exists and so
only that should be copied. The patch follows the approach suggested
by DJ in <https://sourceware.org/ml/libc-alpha/2019-07/msg00662.html>,
with the suggestion from Andreas in
<https://sourceware.org/ml/libc-alpha/2019-10/msg00514.html> of a
single sed command in place of pipeline of grep and three sed
commands.
Tested for x86_64, with and without --enable-hardcoded-path-in-tests;
a previous version with multiple sed commands, implementing the same
logic, also tested for MIPS, with and without
--enable-hardcoded-path-in-tests, to confirm it fixes the original
problem.
Co-authored-by: DJ Delorie <dj@redhat.com>
Adds "make test" for re-running just one test. Also adds
"make help" for help with our Makefile targets, and adds a
mini-help when you just run "make".
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch adds the ability to run debugglibc.sh's inferior program with
arguments specified on the command line. This enables convenient debugging
of non-testcase programs such as iconv/iconv_prog or other dynamically
linked programs. Program arguments may be passed using `--' as a separator.
For example:
$ ./debugglibc.sh -b iconv -- iconv/iconv_prog -f ASCII -t UTF-8 input.txt
This patch adds a new make rule that generates a helper script for
debugging glibc test cases. The new script, debugglibc.sh, is similar
to testrun.sh, in the sense that it allows the execution of the
specified test case, however, it opens the test case in GDB, setting the
library path the same way that testrun.sh does. The commands are based
on the instructions on the wiki for glibc debugging [1,2].
By default, the script tells GDB to load the test case for symbol
information, so that, when a breakpoint is hit, the call stack is
displayed correctly (instead of printing lots of '??'s). For instance,
after running 'make' and 'make check', one could do the following:
$ ./debugglibc.sh nptl/tst-exec1 -b pthread_join
Reading symbols from /home/gabriel/build/powerpc64le/glibc//elf/ld.so...done.
Breakpoint 1 at 0x1444
add symbol table from file "nptl/tst-exec1"
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/home/gabriel/build/powerpc64le/glibc//nptl_db/libthread_db.so.1".
Breakpoint 1, 0x00007ffff7fb1444 in _dl_start_user () from /home/gabriel/build/powerpc64le/glibc/elf/ld.so
Breakpoint 2 at 0x7ffff7f49d48: file pthread_join.c, line 23.
Notice that the script will always start GDB with the program running
and halted at _dl_start_user. So, in order to reach the actual
breakpoint of interest, one should hit 'c', not 'r':
>>> c
Continuing.
[New Thread 0x7ffff7d1f180 (LWP 76443)]
[Switching to Thread 0x7ffff7d1f180 (LWP 76443)]
Thread 2 "ld.so" hit Breakpoint 2, __pthread_join (threadid=140737354087616, thread_return=0x0) at pthread_join.c:24
24 return __pthread_timedjoin_ex (threadid, thread_return, NULL, true);
Then inspect the call stack with 'bt', as usual, and see symbols from
both the test case and from the libraries themselves:
>>> bt
#0 __pthread_join (threadid=140737354087616, thread_return=0x0) at pthread_join.c:24
#1 0x0000000010001f4c in tf (arg=<optimized out>) at tst-exec1.c:37
#2 0x00007ffff7f487e8 in start_thread (arg=0x7ffff7510000) at pthread_create.c:479
#3 0x00007ffff7e523a8 in clone () at ../sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S:82
Tested for powerpc64le and x86_64.
[1] https://sourceware.org/glibc/wiki/Debugging/Loader_Debugging
[2] https://sourceware.org/glibc/wiki/Testing/Builds#Required_gdb_setup
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Andreas Schwab <schwab@suse.de>
Commit 35e038c1d2 started to use an
incomplete list of subdirs based on $(all-subdirs) causing
testroot.pristine to miss files from nss.
Tested if the list of files in testroot.pristine remains the same.
[BZ #24794]
* Makeconfig (all-subdirs): Improved source comments.
* Makefile (testroot.pristine/install.stamp): Pass
subdirs='$(sorted-subdirs)' to make install.
Whenever a sub-make is created, it inherits the variable subdirs from its
parent. This is also true when make check is called with a restricted
list of subdirs. In this scenario, make install is executed "partially"
and testroot.pristine ends up with an incomplete installation.
[BZ #24794]
* Makefile (testroot.pristine/install.stamp): Pass
subdirs='$(all-subdirs)' to make install.
Reviewed-by: DJ Delorie <dj@redhat.com>
Some DSOs are distributed in hardware capability directories, e.g.
/usr/lib64/power7/libc.so.6
Whenever the processor is able to use one of these hardware-enabled
DSOs, testroot.pristine ends up with copies of glibc-provided libraries
from the system because it can't overwrite or remove them.
This patch avoids the unintended copies by executing ld.so with the same
arguments passed to each glibc test.
* Makefile (testroot.pristine/install.stamp): Execute ld.so with
the same arguments used in all tests.
If building on a subset of architectures only, it is easy to miss
wrapper headers which are required by other architectures because
they lack the corresponding sysdeps header. The check ensures
that every installed header which is not itself a sysdeps header
has a header under include/ (that presumably wraps the header,
and perhaps also adding declarations and definitions for !_ISOMAC).
Also check for the absence of the sysdeps/generic/bits directory
removed in commit c72565e5f1, to make
accidental re-introduction more difficult.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I noticed that, now that build-many-glibcs.py no longer copies glibc
sources, I was getting core dumps in my glibc source directories. The
cause appears to be, from the i686-gnu build:
for dso in ` env LD_TRACE_LOADED_OBJECTS=1 \
/scratch/jmyers/glibc-bot/build/glibcs/i686-gnu/glibc/elf/ld.so.1 \
/scratch/jmyers/glibc-bot/build/glibcs/i686-gnu/glibc/testroot.pristine/bin/sh \
[...]
Segmentation fault (core dumped)
In this case, the x86 architecture means the binary executes, but
dumps core rather than actually working.
Anything involving running the newly built glibc should only be done
ifeq ($(run-built-tests),yes). This patch conditions the relevant
part of the testroot setup accordingly.
Tested for x86_64, and with build-many-glibcs.py for i686-gnu.
* Makefile ($(objpfx)testroot.pristine/install.stamp): Do not run
dynamic linker unless [$(run-built-tests) = yes].
$(file …) appears to be the only convenient way to create files
with newlines and make substitution variables. This needs make 4.0
(released in 2013), so update the requirement to match.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
glibc has an add-ons mechanism to allow additional software to be
integrated into the glibc build. Such add-ons may be within the glibc
source tree, or outside it at a path passed to the --enable-add-ons
configure option.
localedata and crypt were once add-ons, distributed in separate
release tarballs, but long since stopped using that mechanism.
Linuxthreads was always an add-on. Ports spent some time as an add-on
with separate release tarballs, then was first moved into the glibc
source tree, then had its sysdeps files moved into the main sysdeps
hierarchy so the add-ons mechanism was no longer used. NPTL spent
some time as an add-on in the main glibc tree before stopping using
the add-on mechanism. libidn used to have separate release tarballs
but no longer does so, but still uses the add-ons mechanism within the
glibc source tree. Various other software has supported building with
the add-ons mechanism at times in the past, but I don't think any is
still widely used.
Add-ons involve significant, little-used complexity in the glibc build
system, and make it hard to understand what the space of possible
glibc configurations is. This patch removes the add-ons mechanism.
libidn is now built via the Subdirs mechanism to cause any
configuration using sysdeps/unix/inet to build libidn; HAVE_LIBIDN
(which effectively means shared libraries are available) is now
defined via sysdeps/unix/inet/configure. Various references to
add-ons around the source tree are removed (in the case of maint.texi,
the example list of sysdeps directories is still very out of date).
Externally maintained ports should now put their files in the normal
sysdeps directory structure rather than being arranged as add-ons;
they probably need to change e.g. elf.h anyway, rather than actually
being able to work just as a drop-in subtree. Hurd libpthread should
be arranged similarly to NPTL, so some files might go in a
hurd-pthreads (or similar) top-level directory in glibc, while sysdeps
files should go in the normal sysdeps directory structure (possibly in
hurd or hurd-pthreads subdirectories, just as there are nptl
subdirectories in the sysdeps tree).
Tested for x86_64, and with build-many-glibcs.py.
* configure.ac (--enable-add-ons): Remove option.
(machine): Do not mention add-ons in comment.
(LIBC_PRECONFIGURE): Likewise.
(add_ons): Remove variable and sanity checks and logic to locate
add-ons.
(add_ons_automatic): Remove variable.
(configured_add_ons): Likewise.
(add_ons_sfx): Likewise.
(add_ons_pfx): Likewise.
(add_on_subdirs): Likewise.
(sysnames_add_ons): Likewise. Remove loop over add-ons and
consideration of add-ons in Implies handling.
(sysdeps_add_ons): Likewise.
* configure: Regenerated.
* libidn/configure.ac: Remove.
* libidn/configure: Likewise.
* sysdeps/unix/inet/configure.ac: New file.
* sysdeps/unix/inet/configure: New generated file.
* sysdeps/unix/inet/Subdirs: Add libidn.
* Makeconfig (sysdeps-srcdirs): Remove variable.
(+sysdep_dirs): Do not include $(sysdeps-srcdirs).
($(common-objpfx)config.status): Do not depend on add-on files.
($(common-objpfx)shlib-versions.v.i): Do not mention add-ons in
comment.
(all-subdirs): Do not include $(add-on-subdirs).
* Makefile (dist-prepare): Do not use $(sysdeps-add-ons).
* config.make.in (add-ons): Remove variable.
(add-on-subdirs): Likewise.
(sysdeps-add-ons): Likewise.
* manual/Makefile (add-chapters): Remove.
($(objpfx)texis): Do not depend on $(add-chapters).
(nonexamples): Do not handle $(add-chapters).
(examples): Do not handle $(add-ons).
(chapters.% top-menu.%): Do not pass '$(add-chapters)' to
libc-texinfo.sh.
* manual/install.texi (Installation): Do not mention add-ons.
(--enable-add-ons): Do not document configure option.
* INSTALL: Regenerated.
* manual/libc-texinfo.sh: Do not handle $2 add-ons argument.
* manual/maint.texi (Hierarchy Conventions): Do not mention
add-ons.
* scripts/build-many-glibcs.py (Glibc.build_glibc): Do not use
--enable-add-ons.
* scripts/gen-sorted.awk: Do not handle Subdirs files from
add-ons.
* scripts/test-installation.pl: Do not handle glibc-compat add-on.
* sysdeps/nptl/Makeconfig: Do not mention add-ons in comment.
This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.
There are still quite a few tests that need to see internal gunk of
one variety or another. For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'. There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.
There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all. (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.) When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.
The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change. They should be
relatively self-explanatory. In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.
* Makerules: New subdir configuration variables 'tests-internal'
and 'test-internal-extras'. Test files in these categories will
still be compiled with MODULE_NAME=nonlib. Test files in the
existing categories (tests, xtests, test-srcs, test-extras) are
now compiled with MODULE_NAME=testsuite.
New subdir configuration variable 'modules-names-tests'. Files
which are in both 'modules-names' and 'modules-names-tests' will
be compiled with MODULE_NAME=testsuite instead of
MODULE_NAME=extramodules.
(gen-as-const-headers): Move to tests-internal.
(do-tests-clean, common-mostlyclean): Support tests-internal.
* Makeconfig (built-modules): Add testsuite.
* Makefile: Change libof-check-installed-headers-c and
libof-check-installed-headers-cxx to 'testsuite'.
* Rules: Likewise. Support tests-internal.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
Remove extra-modules.mk.
* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
very top of the file and rationalize their order.
If MODULE_NAME is not defined at all, define IS_IN to always be
false, and don't define _ISOMAC.
If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
true, define _ISOMAC and suppress everything else in this file,
starting with the inclusion of config.h.
Do check for inappropriate definitions of __OPTIMIZE__ and
__FAST_MATH__ here, but only if _ISOMAC is not defined.
Correct some out-of-date commentary.
* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
and _Mlong_double_ before including math.h.
* include/string.h: If _ISOMAC is defined, don't expose
_STRING_ARCH_unaligned. Move a comment to a more appropriate
location.
* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
* include/time.h, include/unistd.h, include/wchar.h: No need to
check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.
* misc/sys/cdefs.h (__NTHNL): New macro.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
(__m81_defun): Use __NTHNL to avoid errors with GCC 6.
* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
defined, for HAVE_TUNABLES.
* inet/tst-checks-posix.c: No need to define _ISOMAC.
* intl/tst-gettext2.c: Provide own definition of N_.
* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
* math/test-signgam-main.c: No need to define _ISOMAC.
* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
* stdlib/tst-strtod1i.c: ...this new file.
* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
Split tests of __strtod_internal to...
* stdlib/tst-strtod5i.c: ...this new file.
* string/test-string.h: Include stdint.h. Duplicate definition of
inhibit_loop_to_libcall here (from libc-symbols.h).
* string/test-strstr.c: Provide dummy definition of
libc_hidden_builtin_def when including strstr.c.
* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
unload, unload2, circleload1, neededtest, neededtest2,
neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
tst-stackguard1, tst-_dl_addr_inside_object, and all of the
ifunc tests to tests-internal.
Don't add $(modules-names) to test-extras.
* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
Add tst-deadline to tests-static-internal.
* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
tests-internal.
* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
tst-sem12-static, and tst-stackguard1-static to tests-internal.
Link tests-internal with libpthread also.
Don't add $(modules-names) to test-extras.
* nss/Makefile: Move tst-field to tests-internal.
* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
tests-internal.
* sunrpc/Makefile: Move tst-svc_register to tests-internal.
* sysdeps/powerpc/Makefile: Move test-get_hwcap and
test-get_hwcap-static to tests-internal.
* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
tests-internal.
* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
modules-names-tests.
glibc headers include some code (not particularly consistent or
systematic) to put various declarations in C++ namespaces std and
__c99, if _GLIBCPP_USE_NAMESPACES is defined.
As noted in <https://gcc.gnu.org/ml/libstdc++/2017-03/msg00025.html>,
this macro was removed from libstdc++ in 2000. I don't expect
compilation with such old versions of libstdc++ to work with current
glibc headers anyway (whereas old *binaries* are expected to stay
working with current glibc); this patch (which should be a no-op with
any libstdc++ version postdating that removal) removes all this code
from the glibc headers.
The begin-end-check.pl test, whose comments say it is about checking
these namespace macro calls, is also removed. The code in that test
would have covered __BEGIN_DECLS / __END_DECLS as well, but if those
weren't properly matched it would show up with the
check-installed-headers-cxx tests, so I don't think there is an actual
use for keeping begin-end-check.pl with the namespace code removed.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* misc/sys/cdefs.h (__BEGIN_NAMESPACE_STD): Remove macro.
(__END_NAMESPACE_STD): Likewise.
(__USING_NAMESPACE_STD): Likewise.
(__BEGIN_NAMESPACE_C99): Likewise.
(__END_NAMESPACE_C99): Likewise.
(__USING_NAMESPACE_C99): Likewise.
* math/math.h (_Mdouble_BEGIN_NAMESPACE): Do not define and
undefine macro.
(_Mdouble_END_NAMESPACE): Likewise.
* ctype/ctype.h: Do not handle C++ namespaces.
* libio/bits/stdio-ldbl.h: Likewise.
* libio/stdio.h: Likewise.
* locale/locale.h: Likewise.
* math/bits/mathcalls.h: Likewise.
* setjmp/setjmp.h: Likewise.
* signal/signal.h: Likewise.
* stdlib/bits/stdlib-float.h: Likewise.
* stdlib/bits/stdlib-ldbl.h: Likewise.
* stdlib/stdlib.h: Likewise.
* string/string.h: Likewise.
* sysdeps/x86/fpu/bits/mathinline.h: Likewise.
* time/bits/types/clock_t.h: Likewise.
* time/bits/types/struct_tm.h: Likewise.
* time/bits/types/time_t.h: Likewise.
* time/time.h: Likewise.
* wcsmbs/bits/wchar-ldbl.h: Likewise.
* wcsmbs/uchar.h: Likewise.
* wcsmbs/wchar.h: Likewise.
[_GLIBCPP_USE_NAMESPACES] (wint_t): Remove conditional definition.
* wctype/wctype.h: Do not handle C++ namespaces.
* scripts/begin-end-check.pl: Remove.
* Makefile (installed-headers): Likewise.
(tests-special): Do not add $(objpfx)begin-end-check.out.
($(objpfx)begin-end-check.out): Remove.
This adds a test to ensure that the problems fixed in the last several
patches do not recur. Each directory checks the headers that it
installs for two properties: first, each header must be compilable in
isolation, as both C and C++, under a representative combination of
language and library conformance levels; second, there is a blacklist
of identifiers that may not appear in any installed header, currently
consisting of the legacy BSD typedefs. (There is an exemption for the
headers that define those typedefs, and for the RPC headers. It may be
necessary to make this more sophisticated if we add more stuff to the
blacklist in the future.)
In order for this test to work correctly, every wrapper header
that actually defines something must guard those definitions with
#ifndef _ISOMAC. This is the existing mechanism used by the conform/
tests to tell wrapper headers not to define anything that the public
header wouldn't, and not to use anything from libc-symbols.h. conform/
only cares for headers that we need to check for standards conformance,
whereas this test applies to *every* header. (Headers in include/ that
are either installed directly, or are internal-use-only and do *not*
correspond to any installed header, are not affected.)
* scripts/check-installed-headers.sh: New script.
* Rules: In each directory that defines header files to be installed,
run check-installed-headers.sh on them as a special test.
* Makefile: Likewise for the headers installed at top level.
* include/aliases.h, include/alloca.h, include/argz.h
* include/arpa/nameser.h, include/arpa/nameser_compat.h
* include/elf.h, include/envz.h, include/err.h
* include/execinfo.h, include/fpu_control.h, include/getopt.h
* include/gshadow.h, include/ifaddrs.h, include/libintl.h
* include/link.h, include/malloc.h, include/mcheck.h
* include/mntent.h, include/netinet/ether.h
* include/nss.h, include/obstack.h, include/printf.h
* include/pty.h, include/resolv.h, include/rpc/auth.h
* include/rpc/auth_des.h, include/rpc/auth_unix.h
* include/rpc/clnt.h, include/rpc/des_crypt.h
* include/rpc/key_prot.h, include/rpc/netdb.h
* include/rpc/pmap_clnt.h, include/rpc/pmap_prot.h
* include/rpc/pmap_rmt.h, include/rpc/rpc.h
* include/rpc/rpc_msg.h, include/rpc/svc.h
* include/rpc/svc_auth.h, include/rpc/xdr.h
* include/rpcsvc/nis_callback.h, include/rpcsvc/nislib.h
* include/rpcsvc/yp.h, include/rpcsvc/ypclnt.h
* include/rpcsvc/ypupd.h, include/shadow.h
* include/stdio_ext.h, include/sys/epoll.h
* include/sys/file.h, include/sys/gmon.h, include/sys/ioctl.h
* include/sys/prctl.h, include/sys/profil.h
* include/sys/statfs.h, include/sys/sysctl.h
* include/sys/sysinfo.h, include/ttyent.h, include/utmp.h
* sysdeps/arm/nacl/include/bits/setjmp.h
* sysdeps/mips/include/sys/asm.h
* sysdeps/unix/sysv/linux/include/sys/sysinfo.h
* sysdeps/unix/sysv/linux/include/sys/timex.h
* sysdeps/x86/fpu/include/bits/fenv.h:
Add #ifndef _ISOMAC guard around internal declarations.
Add multiple-inclusion guard if not already present.
This patch implements support for the __STDC_WANT_LIB_EXT2__ feature
test macro from ISO/IEC TR 24731-2:2010, thereby implementing one
possible approach for supporting ISO C feature test macros.
Recall that, as described in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00486.html>, these
macros work based on the definition when affected headers are
included, so cannot be handled once when the first system header is
included because that might not be one of the headers the particular
macro in question affects.
<https://sourceware.org/ml/libc-alpha/2016-05/msg00680.html> expresses
views on possible approaches for implementation and
<https://sourceware.org/ml/libc-alpha/2016-06/msg00039.html> follows
up on that.
This patch arranges things so that the relevant condition is
__GLIBC_USE (LIB_EXT2), following one of the suggestions given.
Headers using these macros include <bits/libc-header-start.h>, which
in turn includes <features.h>. Headers must define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION before including
<bits/libc-header-start.h>, to discourage inclusion outside glibc as
requested. __USE_GNU conditions on affected functions are changed to
__GLIBC_USE (LIB_EXT2), while it's added as an additional alternative
on the conditions for functions already enabled for some POSIX
versions.
It would be possible to convert existing __USE_* conditionals to
__GLIBC_USE (with the relevant __GLIBC_USE_* being defined in
<features.h> where __USE_* are presently defined), and so make them
typo-proof (given -Wundef -Werror in glibc builds) because __GLIBC_USE
is used with #if not #ifdef / #if defined.
No attempt is made to enforce the rule about diagnosing different
definitions of __STDC_WANT_LIB_EXT2__ when affected headers are
included; such a diagnostic is incompatible with multiple-include
guards on the affected headers, unless compiler extensions are added
to support it.
As previously noted, glibc does not implement all features from TR
24731-2:2010: the functions aswprintf vaswprintf getwdelim getwline
are not in glibc, although they would be appropriate to add if someone
wished to do so. But I think it makes sense to support the feature
test macro if *any* of the controlled features are present in glibc.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h: New file.
* Makefile (headers): Add bits/libc-header-start.h.
* include/features.h (__STDC_WANT_LIB_EXT2__): Document.
(__GLIBC_USE): New macro.
* libio/stdio.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(fmemopen): Declare also if [__GLIBC_USE (LIB_EXT2)].
(open_memstream): Likewise.
(vasprintf): Declare if [__GLIBC_USE (LIB_EXT2)], not [__USE_GNU].
(__asprintf): Likewise.
(asprintf): Likewise.
(__getdelim): Declare also if [__GLIBC_USE (LIB_EXT2)].
(getdelim): Likewise.
(getline): Likewise.
* string/string.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(strdup): Declare also if [__GLIBC_USE (LIB_EXT2)]
(strndup): Likewise.
* wcsmbs/wchar.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(open_wmemstream): Declare also if [__GLIBC_USE (LIB_EXT2)].
* manual/creature.texi (__STDC_WANT_LIB_EXT2__): Document macro.
Now that GCC 4.7 or later is required to build glibc, this patch moves
the build from using -std=gnu99 to -std=gnu11 (option added in 4.7).
This allows use of C11 features from GCC's headers, such as new
float.h macros and max_align_t.
Tested for x86_64 and x86 (testsuite; installed stripped shared
libraries are unchanged by the patch on x86_64, while I see some
slight code reordering of no significance on x86).
* Makeconfig (CFLAGS): Use -std=gnu11 instead of -std=gnu99.
* Makefile ($(objpfx)c++-types-check.out): Filter out -std=gnu11
instead of -std=gnu99.
* configure.ac (systemtap): Test with -std=gnu11 instead of
-std=gnu99.
* configure: Regenerated.
* math/gen-auto-libm-tests.c: Use -std=gnu11 instead of -std=gnu99
in compilation command in comment.
There is a configure test for the presence of glibc 2.0 headers (that
were renamed / no longer installed in glibc 2.1) and associated
support for removing them on "make install".
Normal practice for subsequent removal / renaming of installed files
has been not to do anything special about removing them; if you want
installed files from an old installation removed reliably, you need to
use a packaging system that tracks what files were installed by a
previous glibc package (via installing in an intermediate directory
with install_root). I think it's been long enough since 2.0 that it's
not particularly useful to have that special logic for those old
headers either; this patch removes it.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* configure.ac (old_glibc_headers): Remove configure test.
* configure: Regenerated.
* config.make.in (old-glibc-headers): Remove variable.
* Makefile [!$(install_root) && $(old-glibc-headers) = yes]
(install): Remove dependency on remove-old-headers.
(headers2_0): Remove variable.
(remove-old-headers): Remove rule.
This patch makes glibc build with -Wold-style-definition to avoid
old-style function definitions creeping back in by accident.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch). Also tested build for arm,
mips64 and powerpc32. Hopefully there aren't any remaining
system-specific files with old-style definitions whose formatting
evaded my searches, but if there are, they will be easy to fix.
* Makeconfig (+gccwarn-c): Add -Wold-style-definition.
* Makefile ($(objpfx)c++-types-check.out): Filter out
$(+gccwarn-c) instead of -Wstrict-prototypes.
Consensus in [1] was that the right way to fix this was simply to
redirect from /dev/null to terminate the test if no inputs was found
by the tests own globbing e.g. "*/*.{o,os,oS}.d" This can happen when
the build is incomplete and the tests are started. This failure causes
check-local-headers.sh to hang forever waiting for input from stdin.
This change makes the test terminate immediately if the glob doesn't
return any files.
[1] https://sourceware.org/ml/libc-alpha/2014-12/msg00337.html
The bits/libc-lock.h and bits/stdio-lock.h headers are installed, but
not used by any other installed header.
Accordingly, this patch stops these headers from being installed. A
followup is intended to move these headers out of the bits/ namespace.
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
* Makefile (headers): Remove bits/libc-lock.h.
* libio/Makefile (headers): Remove bits/stdio-lock.h.
The conditional that evaluates if there are any FAILed test cases
currently always fails, since we ensure it fails if we find any
unexpected results in tests.sum and it would obviously fail if it does
not find failed results in tests.sum. This patch fixes this by simply
inverting the result of the egrep, i.e. succeed if egrep fails (to
find failed results) and fail if it succeeds.
Tested with 'make subdirs=localedata check' and 'make subdirs=locale
check' where all tests succeed and with 'make subdirs=elf check' where
a couple of tests fail for me.
* Makefile (summarize-tests): Fix return value on success.
Carlos reported failures in conform/ tests in environments where the
compiler used could only find headers in glibc's source and build
trees, not any previously installed headers
<https://sourceware.org/ml/libc-alpha/2014-09/msg00040.html>.
This patch moves nptl/semaphore.h to sysdeps/pthread/semaphore.h so
that it can be found by builds from all glibc subdirectories; it's not
in any way NPTL-specific. (I left the Makefile setting to install
this header in nptl/, but maybe it should move as well - it's just not
clear to me what ifeq ($(subdir),...) conditional should be used to
select the directory to associate the header with for installation
purposes. The path in the toplevel Makefile used for begin-end-check
also remains hardcoded; it's a known todo issue to rework that test to
run in each subdirectory checking the headers installed from that
subdirectory, rather than a separate hardcoded list.)
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch). I did *not* test a
configuration such as that in which Carlos saw failure.
* nptl/semaphore.h: Move to ...
* sysdeps/pthread/semaphore.h: ... here.
* Makefile (installed-headers): Change nptl/semaphore.h to
sysdeps/pthread/semaphore.h.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.
LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C. LC_ALL=C also takes
precedence over LANGUAGE, since
2001-01-02 Ulrich Drepper <drepper@redhat.com>
* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
value is ignored if the selected locale is the C locale.
* intl/tst-gettext.c: Set locale for above change.
* intl/tst-translit.c: Likewise.
and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set. One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.
This patch removes the redundant settings. It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).
If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation. However, I don't think we
need to be concerned about pre-2001 build tools.
Tested x86_64.
* Makefile (install): Don't set LANGUAGE.
* Makefile.in (install): Likewise.
* assert/Makefile (test-assert-ENV): Remove variable.
(test-assert-perr-ENV): Likewise.
* elf/Makefile (neededtest4-ENV): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* io/ftwtest-sh (LANG): Remove variable.
* libio/Makefile (tst-widetext-ENV): Likewise.
* manual/install.texi (Running make install): Don't refer to
environment settings for make install.
* INSTALL: Regenerated.
* nptl/tst-tls6.sh: Don't set LANG.
* posix/globtest.sh (LANG): Remove variable.
* string/Makefile (tester-ENV): Likewise.
(inl-tester-ENV): Likewise.
(noinl-tester-ENV): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Don't set LANGUAGE.
* timezone/Makefile (build-testdata): Use $(built-program-cmd)
without explicit environment settings.
localedata/ChangeLog:
* tst-fmon.sh: Don't set LANGUAGE.
* tst-locale.sh: Likewise.
As previously noted
<https://sourceware.org/ml/libc-alpha/2013-05/msg00696.html>,
$(elf-objpfx) and $(elfobjdir) are redundant and should be
consolidated. This patch consolidates on $(elf-objpfx) (for
consistency with $(csu-objpfx)), also changing direct uses of
$(common-objpfx)elf/ to use $(elf-objpfx).
Tested x86_64, including that installed shared libraries are unchanged
by the patch.
* Makeconfig [$(build-hardcoded-path-in-tests) = yes]
(rtld-tests-LDFLAGS): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
(link-libc-before-gnulib): Likewise.
(elfobjdir): Remove variable.
* Makefile (install): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
* Makerules (link-libc-args): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(link-libc-deps): Likewise.
($(common-objpfx)libc.so): Likewise.
($(common-objpfx)linkobj/libc.so): Likewise.
[$(cross-compiling) = no] (symbolic-link-prog): Use $(elf-objpfx)
instead of $(common-objpfx)elf/.
(symbolic-link-list): Likewise.
* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Likewise.
* sysdeps/arm/Makefile (gnulib-arch): Use $(elf-objpfx) instead of
$(elfobjdir)/.
(static-gnulib-arch): Likewise.
* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
[$(cross-compiling) = no]: Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
localedata/ChangeLog:
* Makefile (LOCALEDEF): Use $(elf-objpfx) instead of
$(common-objpfx)elf/.
This patch is an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and
<https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>.
Normal practice for software testsuites is that rather than
terminating immediately when a test fails, they continue running and
report at the end on how many tests passed or failed.
The principle behind the glibc testsuite stopping on failure was
probably that the expected state is no failures and so any failure
indicates a problem such as miscompilation. In practice, while this
is fairly close to true for native testing on x86_64 and x86 (kernel
bugs and race conditions can still cause intermittent failures), it's
less likely to be the case on other platforms, and so people testing
glibc run the testsuite with "make -k" and then examine the logs to
determine whether the failures are what they expect to fail on that
platform, possibly with some automation for the comparison.
This patch switches the glibc testsuite to the normal convention of
not stopping on failure - unless you use stop-on-test-failure=y, in
which case it behaves essentially as it did before (and does not
generate overall test summaries on failure). Instead, the summary
tests.sum may contain tests that FAILed. At the end of the test run,
any FAIL or ERROR lines from tests.sum are printed, and then it exits
with error status if there were any such lines. In addition, build
failures will also cause the test run to stop - this has the
justification that those *do* indicate serious problems that should be
promptly fixed and aren't generally hard to fix (but apart from that,
avoiding the build stopping on those failures seems harder).
Note that unlike the previous patches in this series, this *does*
require people with automation around testing glibc to change their
processes - either to start using tests.sum / xtests.sum to track
failures and compare them with expectations (with or without also
using "make -k" and examining "make" logs to identify build failures),
or else to use stop-on-test-failure=y and ignore the new tests.sum /
xtests.sum mechanism. (If all you check is the exit status from "make
check", no changes are needed unless you want to avoid test runs
continuing after the first failure.)
Tested x86_64.
* scripts/evaluate-test.sh: Handle fourth argument to determine
whether test run should stop on failure.
* Makeconfig (stop-on-test-failure): New variable.
(evaluate-test): Pass fourth argument to evaluate-test.sh based on
$(stop-on-test-failure).
* Makefile (tests): Give a summary of results from testing and
exit with failure status if they include an ERROR or FAIL.
(xtests): Likewise.
* manual/install.texi (Configuring and compiling): Mention
stop-on-test-failure=y.
* INSTALL: Regenerated.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00197.html>, makes
testsuite runs generate an overall summary of test results.
A new script merge-test-results.sh deals both with collecting results
within a directory to a file with all the results from that directory,
and collecting the results from subdirectories into a single overall
file (there's not much in common between the two modes of operation of
the script, but it seemed silly to have two separate scripts for
this). Within a directory, missing results produce UNRESOLVED lines;
at top level, missing results for a whole directory produce an ERROR
line (since toplevel can't identify what the specific missing tests
are in this case).
Note that this does not change the rules for when "make" considers
there has been an error, or terminates, so unexpected failures will
still cause make to terminate, or, with -k, mean the commands for
"tests" don't get run because of failure of a dependency.
Tested x86_64, including that the summary does in fact reflect all the
tests with .test-result files.
* scripts/merge-test-results.sh: New file.
* Makefile (tests-special-notdir): New variable.
(tests): Run merge-test-results.sh.
(xtests): Likewise.
* Rules (tests-special-notdir): New variable.
(xtests-special-notdir): Likewise.
(tests): Run merge-test-results.sh
(xtests): Likewise.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
