mirror of
https://sourceware.org/git/glibc.git
synced 2024-12-04 10:50:07 +00:00
04277e02d7
137 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Joseph Myers
|
df19fdcfec |
Fix MIPS n32 lseek, lseek64 (bug 21019).
The lseek consolidation broke lseek64 for MIPS n32, so resulting in io/test-lfs failing with an incorrect return from ftello64. This configuration uses the lseek syscall with a 64-bit return value; as the C syscall macros return long, they cannot be used in this case and so an assembly implementation is needed; accordingly, this patch adds lseek64 back to syscalls.list for this configuration. lseek was also broken, truncating the result without checking for overflow. lseek however was already broken before the consolidation; it aliased lseek64 so would return an out-of-range value, resulting in architecturally undefined behavior in the caller if it tried to use a non-sign-extended value with a 32-bit instruction. This patch adds a custom lseek implementation in C for n32, which calls __lseek64 to get the 64-bit value then checks for overflow. Because the prior lseek breakage did not show in test results, and the lseek64 breakage showed only indirectly through tests of ftello64, test coverage was clearly inadequate. This patch extends io/test-lfs.c to test the lseek64 return value (at a point where it has already seeked over 2GB into a file), and then to test the lseek return value (with the latter's expectations depending on whether off_t is smaller than off64_t). Tested for mips64 n32. Also tested test-lfs for x86_64 and x86, where as expected it passes. [BZ #21019] * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (lseek64): New syscall entry. * sysdeps/unix/sysv/linux/mips/mips64/n32/lseek.c: New file. * io/test-lfs.c (do_test): Test offset returned from lseek64 and lseek. |
||
Joseph Myers
|
bfff8b1bec | Update copyright dates with scripts/update-copyrights. | ||
Joseph Myers
|
423c2b9d08 |
Add fromfp functions.
TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp, ufromfpx, and float and long double variants) to convert from floating-point to an integer type with any signedness and any given width up to that of intmax_t, in any of the five IEEE rounding modes (the usual four for binary floating point, plus rounding to nearest with ties rounding away from zero), with control of whether in-range non-integer values should result in the "inexact" exception being raised. This patch implements these functions for glibc. These implementations are (apart from raising exceptions) pure integer implementations; it's entirely possible optimized versions could be devised for some architectures. A common math/fromfp.h header provides various common helper code that can readily be shared between the implementations for different types. For each type, the bulk of the implementation is also shared between the four functions, with wrappers that define UNSIGNED and INEXACT macros appropriately before including the main implementation. As the functions return intmax_t and uintmax_t without math.h being allowed to expose those typedef names, they are declared using __intmax_t and __uintmax_t as obtained from <bits/types.h>. The FP_INT_* rounding direction macros are defined as ascending integers in the order the names are listed in the TS; I see no significant value in allowing architectures to vary the values of them. The libm-test machinery is duly adapted to handle unsigned int arguments, and intmax_t and uintmax_t results. Because each test input is generally tested for four functions, five rounding modes and several different widths, the libm-test.inc additions are very large. Thus, the diffs in the body of this message exclude the libm-test.inc changes, with the full patch being attached gzipped. The bulk of the new tests were generated (expanded from a test input plus rounding results and information about where it lies in the relevant interval between integers, to libm-test tests for all relevant combinations of function, rounding direction and width) by a script that's included in the patch as math/gen-fromfp-tests.py (input data math/gen-fromfp-tests-inputs); as an ad hoc script that's not really expected to be rerun, it's not very polished, but it's at least plausibly useful for adding any further tests for these functions in future. I may split the libm-test tests up by function in future (so both libm-test.inc and auto-libm-test-out are split into separate files, and the tests for each function are also built and run separately), but not for 2.25. For no obvious reason, adding tgmath tests for the new functions resulted in -Wuninitialized errors from test-tgmath.c about the variable i being used uninitialized. Those errors were correct - the variable is read by the frexp version in test-tgmath.c (where real frexp would write through that pointer instead of reading it) - but I don't know why this patch would result in the pre-existing issue being newly detected. The patch initializes the variable to avoid those errors. With these changes, glibc 2.25 should have all the library features from TS 18661-1 other than the functions that round result to narrower type (and constant rounding directions, but I'm considering those mainly a compiler feature not a library one). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): New declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise. * math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise. * math/math.h: Include <bits/types.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum constant and macro. (FP_INT_DOWNWARD): Likewise. (FP_INT_TOWARDZERO): Likewise. (FP_INT_TONEARESTFROMZERO): Likewise. (FP_INT_TONEAREST): Likewise. * math/Versions (fromfp): New libm symbol at version GLIBC_2.25. (fromfpf): Likewise. (fromfpl): Likewise. (ufromfp): Likewise. (ufromfpf): Likewise. (ufromfpl): Likewise. (fromfpx): Likewise. (fromfpxf): Likewise. (fromfpxl): Likewise. (ufromfpx): Likewise. (ufromfpxf): Likewise. (ufromfpxl): Likewise. * math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF, s_fromfpxF and s_ufromfpxF. * math/gen-fromfp-tests.py: New file. * math/gen-fromfp-tests-inputs: Likewise. * math/libm-test.inc: Include <stdint.h> (check_intmax_t): New function. (check_uintmax_t): Likewise. (struct test_fiu_M_data): New type. (struct test_fiu_U_data): Likewise. (RUN_TEST_fiu_M): New macro. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (fromfp_test_data): New array. (fromfp_test): New function. (fromfpx_test_data): New array. (fromfpx_test): New function. (ufromfp_test_data): New array. (ufromfp_test): New function. (ufromfpx_test_data): New array. (ufromfpx_test): New function. (main): Call fromfp_test, fromfpx_test, ufromfp_test and ufromfpx_test. * math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor characters. * math/test-tgmath-ret.c: Include <stdint.h>. (rm): New variable. (width): Likewise. (CHECK_RET_CONST_TYPE): Take extra arguments and pass them to called function. (CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to CHECK_RET_CONST_TYPE. (CHECK_RET_CONST_DOUBLE): Likewise. (CHECK_RET_CONST_LDOUBLE): Likewise. (CHECK_RET_CONST): Take extra arguments and pass them to calls macros. (fromfp): New CHECK_RET_CONST call. (ufromfp): Likewise. (fromfpx): Likewise. (ufromfpx): Likewise. (do_test): Call check_return_fromfp, check_return_ufromfp, check_return_fromfpx and check_return_ufromfpx. * math/test-tgmath.c: Include <stdint.h> (NCALLS): Increase to 138. (F(compile_test)): Initialize i. Call fromfp functions. (F(fromfp)): New function. (F(fromfpx)): Likewise. (F(ufromfp)): Likewise. (F(ufromfpx)): Likewise. * manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD, FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO, FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf, ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and ufromfpxl. * manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx, ufromfp and ufromfpx. * math/fromfp.h: New file. * sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise. * sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise. * sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise. * sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise. * sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise. * sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise. * sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp, ufromfp, fromfpx and ufromfpx. (CFLAGS-nldbl-fromfp.c): New variable. (CFLAGS-nldbl-fromfpx.c): Likewise. (CFLAGS-nldbl-ufromfp.c): Likewise. (CFLAGS-nldbl-ufromfpx.c): Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>. * sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Adhemerval Zanella
|
50a6b4e0e4 |
Use shmget syscall for linux implementation
this patch add a direct call to shmget syscall if it is supported by kernel features. Checked on x86_64, i686, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/alpha/syscalls.list (shmget): Remove. * sysdeps/unix/sysv/linux/arm/syscalls.list (shmget): Likewise. * sysdeps/unix/sysv/linux/generic/syscalls.list (shmget): Likewise. * sysdeps/unix/sysv/linux/hppa/syscalls.list (shmget): Likewise. * sysdeps/unix/sysv/linux/ia64/syscalls.list (shmget): Likewise. * sysdeps/unix/sysv/linux/microblaze/syscalls.list (shmget): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (shmget): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (shmget): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (shmget): Likewise. * sysdeps/unix/sysv/linux/shmget.c (shmget): Use shmget syscall if it is defined. |
||
Adhemerval Zanella
|
214f017fdf |
Use shmdt syscall for linux implementation
this patch add a direct call to shmdt syscall if it is supported by kernel features. hecked on x86_64, i686, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/alpha/syscalls.list (shmdt): Remove. * sysdeps/unix/sysv/linux/arm/syscalls.list (shmdt): Likewise. * sysdeps/unix/sysv/linux/generic/syscalls.list (shmdt): Likewise. * sysdeps/unix/sysv/linux/hppa/syscalls.list (shmdt): Likewise. * sysdeps/unix/sysv/linux/ia64/syscalls.list (shmdt): Likewise. * sysdeps/unix/sysv/linux/microblaze/syscalls.list (shmdt): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (shmdt): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (shmdt): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (shmdt): Likewise. * sysdeps/unix/sysv/linux/shmdt.c (shmdt): Use shmdt syscall if it is defined. |
||
Adhemerval Zanella
|
e01f79e412 |
Consolidate Linux shmctl implementation
This patch consolidates the shmctl Linux implementation in only one default file, sysdeps/unix/sysv/linux/shmctl.c. If tries to use the direct syscall if it is supported, otherwise will use the old ipc multiplex mechanism. The patch also simplify header inclusion and reorganize internal compat symbol to be built only if old ipc is defined. Checked on x86_64, i686, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/alpha/Makefile (sysdeps_routines): Remove oldshmctl. * sysdeps/unix/sysv/linux/alpha/syscalls.list (shmctl): Remove. * sysdeps/unix/sysv/linux/arm/syscalls.list (shmctl): Likewise. * sysdeps/unix/sysv/linux/generic/syscalls.list (shmctl): Likewise. * sysdeps/unix/sysv/linux/hppa/syscalls.list (shmctl): Likewise. * sysdeps/unix/sysv/linux/ia64/syscalls.list (shmctl): Likewise. * sysdeps/unix/sysv/linux/microblaze/syscalls.list (shmctl): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (shmctl): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (shmctl): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (shmctl): Likewise. * sysdeps/unix/sysv/linux/alpha/shmctl.c: Remove file. * sysdeps/unix/sysv/linux/arm/shmctl.c: Likewise. * sysdeps/unix/sysv/linux/microblaze/shmctl.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/shmctl.c: Use default implementation. * sysdeps/unix/sysv/linux/shmctl.c (__new_shmctl): Use shmctl syscall if it is defined. |
||
Adhemerval Zanella
|
8232e7d209 |
Use shmat syscall for Linux implementation
This patch add a direct call to shmat syscall if it is supported by kernel features. Checked on x86_64, i686, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/alpha/syscalls.list (shmat): Remove. * sysdeps/unix/sysv/linux/arm/syscalls.list (shmat): Likewise. * sysdeps/unix/sysv/linux/generic/syscalls.list (shmat): Likewise. * sysdeps/unix/sysv/linux/hppa/syscalls.list (shmat): Likewise. * sysdeps/unix/sysv/linux/ia64/syscalls.list (shmat): Likewise. * sysdeps/unix/sysv/linux/microblaze/syscalls.list (shmat): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (shmat): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (shmat): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (shmat): Likewise. * sysdeps/unix/sysv/linux/alpha/kernel-features.h (__NR_shmat): Define to __NR_osf_shmat. * sysdeps/unix/sysv/linux/shmat.c (shmat): Use shmat syscall if it is defined. |
||
Adhemerval Zanella
|
38cee35b0c |
Consolidate Linux semtimedop implementation
This patch consolidates the semtimedop Linux implementation in only one default file, sysdeps/unix/sysv/linux/semtimedop.c. If tries to use the direct syscall if it is supported, otherwise will use the old ipc multiplex mechanism. Checked on x86_64, i686, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/alpha/syscalls.list (semtimedop): Remove. * sysdeps/unix/sysv/linux/arm/syscalls.list (semtimedop): Likewise. * sysdeps/unix/sysv/linux/generic/syscalls.list (semtimedop): Likewise. * sysdeps/unix/sysv/linux/hppa/syscalls.list (semtimedop): Likewise. * sysdeps/unix/sysv/linux/ia64/syscalls.list (semtimedop): Likewise. * sysdeps/unix/sysv/linux/microblaze/syscalls.list (semtimedop): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (semtimedop): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (semtimedop): Likewise. * sysdeps/unix/sysv/linux/m68k/semtimedop.S: Remove file. * sysdeps/unix/sysv/linux/s390/semtimedop.c: Reorganize headers and add a comment about s390 syscall difference from default one. * sysdeps/unix/sysv/linux/semtimedop.c (semtimedop): Use semtimedop syscall if it is defined. |
||
Adhemerval Zanella
|
0f97184020 |
Use semop syscall for Linux implementation
This patch add a direct call to semop syscall if it is supported by kernel headers. Checked on x86_64, i686, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/alpha/syscalls.list (semop): Remove. * sysdeps/unix/sysv/linux/arm/syscalls.list (semop): Likewise. * sysdeps/unix/sysv/linux/generic/syscalls.list (semop): Likewise. * sysdeps/unix/sysv/linux/hppa/syscalls.list (semop): Likewise. * sysdeps/unix/sysv/linux/ia64/syscalls.list (semop): Likewise. * sysdeps/unix/sysv/linux/microblaze/syscalls.list (semop): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (semop): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (semop): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (semop): Likewise. * sysdeps/unix/sysv/linux/semop.c (semop): Use semop syscall if it is defined. |
||
Adhemerval Zanella
|
d29f6bcdcc |
Use semget syscall for Linux implementation
This patch add a direct call to semget syscall if it is supported by kernel features. hecked on x86_64, i686, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/alpha/syscalls.list (semget): Remove. * sysdeps/unix/sysv/linux/arm/syscalls.list (semget): Likewise. * sysdeps/unix/sysv/linux/generic/syscalls.list (semget): Likewise. * sysdeps/unix/sysv/linux/hppa/syscalls.list (semget): Likewise. * sysdeps/unix/sysv/linux/ia64/syscalls.list (semget): Likewise. * sysdeps/unix/sysv/linux/microblaze/syscalls.list (semget): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (semget): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (semget): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (semget): Likewise. * sysdeps/unix/sysv/linux/semget.c (semget): Use semget syscall if it is defined. |
||
Adhemerval Zanella
|
40c0a78068 |
Consolidate Linux semctl implementation
This patch consolidates the semctl Linux implementation in only one default file, sysdeps/unix/sysv/linux/semctl.c. If tries to use the direct syscall if it is supported, otherwise will use the old ipc multiplex mechanism. The patch also simplify header inclusion and reorganize internal compat symbol to be built only if old ipc is defined. Checked on x86_64, i686, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/alpha/Makefile (sysdeps_routines): Remove oldsemctl. * sysdeps/unix/sysv/linux/alpha/semctl.c: Remove file. * sysdeps/unix/sysv/linux/arm/semctl.c: Likewise. * sysdeps/unix/sysv/linux/microblaze/semctl.c: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/semctl.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/semctl.c: Use defaulf implementation. * sysdeps/unix/sysv/linux/semctl.c (__new_semctl): Use semctl syscall if it is defined. * sysdeps/unix/sysv/linux/generic/syscalls.list (semctl): Remove. * sysdeps/unix/sysv/linux/alpha/syscalls.list (semctl): Likewise. * sysdeps/unix/sysv/linux/hppa/syscalls.list (semctl): Likewise. * sysdeps/unix/sysv/linux/ia64/syscalls.list (semctl): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (semctl): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (semctl): Likewise. |
||
Adhemerval Zanella
|
2182a151a7 |
Use msgget syscall for Linux implementation
This patch add a direct call to msgget syscall if it is supported by kernel features. hecked on x86_64, i686, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/alpha/syscalls.list (msgget): Remove. * sysdeps/unix/sysv/linux/arm/syscalls.list (msgget): Likewise. * sysdeps/unix/sysv/linux/generic/syscalls.list (msgget): Likewise. * sysdeps/unix/sysv/linux/hppa/syscalls.list (msgget): Likewise. * sysdeps/unix/sysv/linux/ia64/syscalls.list (msgget): Likewise. * sysdeps/unix/sysv/linux/microblaze/syscalls.list (msgget): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (msgget): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (msgget): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (msgget): Likewise. * sysdeps/unix/sysv/linux/msgget.c (msgget): Use msgget syscall if define. |
||
Adhemerval Zanella
|
692fe43ae2 |
Use msgsnd syscall for Linux implementation
This patch add a direct call to msgsnd syscall if it is supported by kernel features. hecked on x86_64, i686, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/alpha/syscalls.list (msgsnd): Remove. * sysdeps/unix/sysv/linux/arm/syscalls.list (msgsnd): Likewise. * sysdeps/unix/sysv/linux/generic/syscalls.list (msgsnd): Likewise. * sysdeps/unix/sysv/linux/hppa/syscalls.list (msgsnd): Likewise. * sysdeps/unix/sysv/linux/ia64/syscalls.list (msgsnd): Likewise. * sysdeps/unix/sysv/linux/microblaze/syscalls.list (msgsnd): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (msgsnd): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (msgsnd): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (msgsnd): Likewise. * sysdeps/unix/sysv/linux/msgsnd.c (__libc_msgsnd): Use msgsnd syscall if defined. |
||
Adhemerval Zanella
|
dee23189ae |
Consolidate Linux msgrcv implementation
This patch consolidates the msgrcv Linux implementation in only one default file, sysdeps/unix/sysv/linux/msgrcv.c. If tries to use the direct syscall if it is supported, otherwise will use the old ipc multiplex mechanism. Checked on x86_64, i686, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/alpha/syscalls.list (msgctl): Remove. * sysdeps/unix/sysv/linux/arm/syscalls.list (msgctl): Likewise. * sysdeps/unix/sysv/linux/generic/syscalls.list (msgctl): Likewise. * sysdeps/unix/sysv/linux/hppa/syscalls.list (msgctl): Likewise. * sysdeps/unix/sysv/linux/ia64/syscalls.list (msgctl): Likewise. * sysdeps/unix/sysv/linux/microblaze/syscalls.list (msgctl): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (msgctl): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (msgctl): Likewise, * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (msgctl): Likewise. * sysdeps/unix/sysv/linux/msgrcv.c (__libc_msgrcv): Use msgrcv syscall if defined. * sysdeps/unix/sysv/linux/sparc/sparc64/msgrcv.c: Remove file. |
||
Adhemerval Zanella
|
356c0aabd0 |
Consolidate Linux msgctl implementation
This patch consolidates the msgctl Linux implementation in only one default file, sysdeps/unix/sysv/linux/msgctl.c. If tries to use the direct syscall if it is supported, otherwise will use the old ipc multiplex mechanism. The patch also simplify header inclusion and reorganize internal compat symbol to be built only if old ipc is defined. Checked on x86_64, i686, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/alpha/Makefile (sysdeps_routines): Remove oldmsgctl. * sysdeps/unix/sysv/linux/alpha/msgctl.c: Remove file. * sysdeps/unix/sysv/linux/arm/msgctl.c: Likewise. * sysdeps/unix/sysv/linux/microblaze/msgctl.c: Likewise. * sysdeps/unix/sysv/linux/alpha/syscalls.list (oldmsgctl): Remove. * sysdeps/unix/sysv/linux/generic/syscalls.list (msgctl): Likewise. * sysdeps/unix/sysv/linux/hppa/syscalls.list (msgctl): Likewise. * sysdeps/unix/sysv/linux/ia64/syscalls.list (msgctl): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (msgctl): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (msgctl): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/msgctl.c: Use default implementation. * sysdeps/unix/sysv/linux/msgctl.c (__new_msgctl): Use msgctl syscall if defined. |
||
Adhemerval Zanella
|
1e5834c38a |
Refactor Linux ipc_priv header
Some architectures support the old-style IPC and require IPC_64 equal to 0x100 to be passed along SysV IPC syscalls, while new architectures should default to new IPC version (without the flags being set). This patch refactor current ipc_priv.h Linux headers in two directions: - Remove cross platform references (for instance alpha including powerpc definition) and add required definition for each required port. The idea is to avoid tie one architecture definition with another and make platform change independent. - Move all common definitions (the ipc syscall commands) on a common header, ipc_ops.h. * sysdeps/unix/sysv/linux/aarch64/ipc_priv.h: New file. * sysdeps/unix/sysv/linux/alpha/ipc_priv.h: Avoid included other arch definition and define its own. * sysdeps/unix/sysv/linux/ipc_ops.h: New file. * sysdeps/unix/sysv/linux/x86_64/ipc_priv.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/ipc_priv.h: Likewise. * sysdeps/unix/sysv/linux/mips/ipc_priv.h: Remove file. * sysdeps/unix/sysv/linux/mips/mips64/ipc_priv.h: New file. * sysdeps/unix/sysv/linux/ipc_priv.h: Move ipc syscall operation definitions to common header. * sysdeps/unix/sysv/linux/powerpc/ipc_priv.h: Use common syscall operation from ipc_ops.h. |
||
Joseph Myers
|
41c67149b9 |
Add roundeven, roundevenf, roundevenl.
TS 18661-1 defines roundeven functions that round a floating-point number to the nearest integer, in that floating-point type, with ties rounding to even (whereas the round functions round ties away from zero). As with other such functions, they raise no exceptions apart from "invalid" for signaling NaNs. There was a previous user request for this functionality in glibc in <https://sourceware.org/ml/libc-help/2015-02/msg00005.html>. This patch implements these functions for glibc. The implementations use integer bit-manipulation (or roundeven on the high and low parts, in the IBM long double case). It's possible that there may be faster approaches on some architectures (in particular, on AArch64 the frintn instruction should do exactly what's required); I'll leave it to architecture maintainers or others interested to implement such architecture-specific versions if desired. (Where architectures have instructions to round to nearest integer in the current rounding mode, implementations saving and restoring the rounding mode - and dealing with exceptions if those instructions generate "inexact" - are also possible, though their performance depends on the cost of manipulating exceptions / rounding mode state.) Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New macro. * math/Versions (roundeven): New libm symbol at version GLIBC_2.25. (roundevenf): Likewise. (roundevenl): Likewise. * math/Makefile (libm-calls): Add s_roundevenF. * math/libm-test.inc (roundeven_test_data): New array. (roundeven_test): New function. (main): Call roundeven_test. * math/test-tgmath.c (NCALLS): Increase to 134. (F(compile_test)): Call roundeven. (F(roundeven)): New function. * manual/arith.texi (Rounding Functions): Document roundeven, roundevenf and roundevenl. * manual/libm-err-tab.pl (@all_functions): Add roundeven. * include/math.h (roundeven): Use libm_hidden_proto. * sysdeps/ieee754/dbl-64/s_roundeven.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise. * sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add roundeven. (CFLAGS-nldbl-roundeven.c): New variable. * sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Joseph Myers
|
525f803984 |
Add fmaxmag, fminmag functions.
TS 18661-1 defines fmaxmag and fminmag functions that return the argument with maximum / minimum magnitude (acting like fmax / fmin if the arguments have the same magnitude or either argument is a NaN). These correspond to the IEEE 754-2008 operations maxNumMag and minNumMag. This patch implements these functions for glibc. They are implemented with type-generic templates. Tests are based on those for fmax and fmin. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fmaxmag): New declaration. (fminmag): Likewise. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fmaxmag): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fminmag): Likewise. * math/Versions (fmaxmag): New libm symbol at version GLIBC_2.25. (fmaxmagf): Likewise. (fmaxmagl): Likewise. (fminmag): Likewise. (fminmagf): Likewise. (fminmagl): Likewise. * math/Makefile (gen-libm-calls): Add s_fmaxmagF and s_fminmagF. * math/s_fmaxmag_template.c: New file. * math/s_fminmag_template.c: Likewise. * math/libm-test.inc (fmaxmag_test_data): New array. (fmaxmag_test): New function. (fminmag_test_data): New array. (fminmag_test): New function. (main): Call fmaxmag_test and fminmag_test. * math/test-tgmath.c (NCALLS): Increase to 132. (F(compile_test)): Call fmaxmag and fminmag. (F(fminmag)): New function. (F(fmaxmag)): Likewise. * manual/arith.texi (Misc FP Arithmetic): Document fminmag, fminmagf, fminmagl, fmaxmag, fmaxmagf and fmaxmagl. * manual/libm-err-tab.pl (@all_functions): Add fmaxmag and fminmag. * sysdeps/ieee754/ldbl-opt/nldbl-fmaxmag.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fminmag.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_fmaxmagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_fminmagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmaxmag and fminmag. (CFLAGS-nldbl-fmaxmag.c): New variable. (CFLAGS-nldbl-fminmag.c): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Zack Weinberg
|
ea1bd74def |
New string function explicit_bzero (from OpenBSD).
explicit_bzero(s, n) is the same as memset(s, 0, n), except that the compiler is not allowed to delete a call to explicit_bzero even if the memory pointed to by 's' is dead after the call. Right now, this effect is achieved externally by having explicit_bzero be a function whose semantics are unknown to the compiler, and internally, with a no-op asm statement that clobbers memory. This does mean that small explicit_bzero operations cannot be expanded inline as small memset operations can, but on the other hand, small memset operations do get deleted by the compiler. Hopefully full compiler support for explicit_bzero will happen relatively soon. There are two new tests: test-explicit_bzero.c verifies the visible semantics in the same way as the existing test-bzero.c, and tst-xbzero-opt.c verifies the not-being-optimized-out property. The latter is conceptually based on a test written by Matthew Dempsky for the OpenBSD regression suite. The crypt() implementation has an immediate use for this new feature. We avoid having to add a GLIBC_PRIVATE alias for explicit_bzero by running all of libcrypt's calls through the fortified variant, __explicit_bzero_chk, which is in the impl namespace anyway. Currently I'm not aware of anything in libc proper that needs this, but the glue is all in place if it does become necessary. The legacy DES implementation wasn't bothering to clear its buffers, so I added that, mostly for consistency's sake. * string/explicit_bzero.c: New routine. * string/test-explicit_bzero.c, string/tst-xbzero-opt.c: New tests. * string/Makefile (routines, strop-tests, tests): Add them. * string/test-memset.c: Add ifdeffage for testing explicit_bzero. * string/string.h [__USE_MISC]: Declare explicit_bzero. * debug/explicit_bzero_chk.c: New routine. * debug/Makefile (routines): Add it. * debug/tst-chk1.c: Test fortification of explicit_bzero. * string/bits/string3.h: Fortify explicit_bzero. * manual/string.texi: Document explicit_bzero. * NEWS: Mention addition of explicit_bzero. * crypt/crypt-entry.c (__crypt_r): Clear key-dependent intermediate data before returning, using explicit_bzero. * crypt/md5-crypt.c (__md5_crypt_r): Likewise. * crypt/sha256-crypt.c (__sha256_crypt_r): Likewise. * crypt/sha512-crypt.c (__sha512_crypt_r): Likewise. * include/string.h: Redirect internal uses of explicit_bzero to __explicit_bzero_chk[_internal]. * string/Versions [GLIBC_2.25]: Add explicit_bzero. * debug/Versions [GLIBC_2.25]: Add __explicit_bzero_chk. * sysdeps/arm/nacl/libc.abilist * sysdeps/unix/sysv/linux/aarch64/libc.abilist * sysdeps/unix/sysv/linux/alpha/libc.abilist * sysdeps/unix/sysv/linux/arm/libc.abilist * sysdeps/unix/sysv/linux/hppa/libc.abilist * sysdeps/unix/sysv/linux/i386/libc.abilist * sysdeps/unix/sysv/linux/ia64/libc.abilist * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist * sysdeps/unix/sysv/linux/microblaze/libc.abilist * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist * sysdeps/unix/sysv/linux/nios2/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist * sysdeps/unix/sysv/linux/sh/libc.abilist * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Add entries for explicit_bzero and __explicit_bzero_chk. |
||
Florian Weimer
|
92dcaa3e2f | Add getentropy, getrandom, <sys/random.h> [BZ #17252] | ||
Joseph Myers
|
55a38f8236 |
Add llogb, llogbf, llogbl.
TS 18661-1 defines llogb functions that are like ilogb except that they return long int instead of int. Corresponding FP_LLOGB* macros are defined, whose values are required to have the obvious correspondence to those of the FP_ILOGB* macros. This patch implements these functions and macros for glibc. llogb uses the type-generic infrastructure, with an implementation similar to the wrapper for ilogb but with additional conversion from FP_ILOGB* to FP_LLOGB*; this approach avoids needing to modify or duplicate any of the architecture-specific ilogb implementations. Tests are also based on those for ilogb. Ideally the llogb functions would alias the ilogb ones when long is 32-bit, but such aliasing requires the associated header declarations of the different-type alias to be hidden, typically by defining macros before including the header (see e.g. how sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to __hidden_lround before including <math.h>). The infrastructure for type-generic function implementations does not support defining such macros at present (since C code can't define a macro whose name is determined by other macros). So this patch leaves them as separate functions (similar to e.g. scalbln and scalbn being separate in such a case as well), but with the remapping of FP_ILOGB* to FP_LLOGB* conditioned out in the case where it would be the identity map. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New macro. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise. * math/Versions (llogb): New libm symbol at version GLIBC_2.25. (llogbf): Likewise. (llogbl): Likewise. * math/Makefile (gen-libm-calls): Add w_llogbF. (tests): Add test-fp-llogb-constants. * math/w_llogb_template.c: New file. Based on math/w_ilogb_template.c. * math/libm-test.inc (llogb_test_data): New array. (llogb_test): New function. (main): Call llogb_test. * math/test-fp-llogb-constants.c: New file. Based on math/test-fp-ilogb-constants.c. * math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call. (do_test): Call check_return_llogb. * math/test-tgmath.c (NCALLS): Increase to 126. (F(compile_test)): Call llogb. (F(llogb)): New function. * manual/math.texi (Exponents and Logarithms): Document llogb, llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN. * manual/libm-err-tab.pl (@all_functions): Add llogb. * sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file. * sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb. (CFLAGS-nldbl-llogb.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Florian Weimer
|
b04beebf07 |
ld.so: Remove __libc_memalign
It is no longer needed since commit
|
||
Joseph Myers
|
457663a7cd |
Add setpayloadsig, setpayloadsigf, setpayloadsigl.
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayloadsig functions for glibc; these are like the setpayload functions, but produce a signaling NaN instead of a quiet NaN. The substance of the implementation was included with the setpayload implementation, so the new files here just need to wrap the main files with different defines to build the new functions. Because the functions store a signaling NaN via a pointer and the libm-test macros choose a suitable initial value for the variable in such a case by comparing with the expected value, the relevant macro needs to clear exceptions after FE_INVALID may have been raised by that comparison. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayloadsig): New declaration. * math/Versions (setpayloadsig): New libm symbol at version GLIBC_2.25. (setpayloadsigf): Likewise. (setpayloadsigl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadsigF. * math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept (FE_ALL_EXCEPT) after initializing EXTRA_VAR. (setpayloadsig_test_data): New array. (setpayloadsig_test): New function. (main): Call setpayloadsig_test. * manual/arith.texi (FP Bit Twiddling): Document setpayloadsig, setpayloadsigf and setpayloadsigl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file. * sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayloadsig. (CFLAGS-nldbl-setpayloadsig.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Joseph Myers
|
eb3c12c784 |
Add setpayload, setpayloadf, setpayloadl.
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayload functions for glibc; these set a number (pointed to by a function argument) to a quiet NaN with the given payload, or to +0 if the given payload is not valid. The implementations are structured to allow the substance of the implementation to be shared with the setpayloadsig functions when those are added. The semantics in the TS are not entirely clear in the case where the payload passed to the function is zero (see discussion on the WG14 reflector last month). This patch implements what seems the most sensible interpretation, that -0 is never valid to give as the payload, but +0 is valid in the case where the kind of NaN being generated has its high mantissa bit set so payload 0 is actually possible in such a NaN. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayload): New declaration. * math/Versions (setpayload): New libm symbol at version GLIBC_2.25. (setpayloadf): Likewise. (setpayloadl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadF. * math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct test_Ff_b1_data. (RUN_TEST_Ff_b1): New macro. (RUN_TEST_LOOP_Ff_b1): Likewise. (canonicalize_test_data): Update type. (setpayload_test_data): New array. (setpayload_test): New function. (main): Call setpayload_test. * manual/arith.texi (FP Bit Twiddling): Document setpayload, setpayloadf and setpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayload.c: New file. * sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayload. (CFLAGS-nldbl-setpayload.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Adhemerval Zanella
|
d4d8a12960 |
Consolidate Linux truncate implementations
This patch consolidates all Linux truncate implementation on sysdeps/unix/sysv/linux/truncate{64}.c. It is based on {INTERNAL,INLINE}_SYSCALL patch [1] to simplify the syscall construction. General idea is to build ftruncate iff __OFF_T_MATCHES_OFF64_T is not defined, otherwise ftruncate64 will be build and ftruncate will be an alias. The fallocate will use old compat syscall and pass 32-bit off_t argument, while fallocate64 will handle the correct off64_t passing using __ALIGNMENT_ARG and SYSCALL_LL64 macros. Tested on x86_64, i386, aarch64, and armhf. * sysdeps/unix/sysv/linux/arm/truncate64.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/truncate.c: Likewise. * sysdeps/sysv/linux/generic/wordsize-32/truncate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/truncate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/truncate64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/truncate64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/truncate64.c: Likewise. * sysdeps/unix/sysv/linux/truncate.c: New file. * sysdeps/unix/sysv/linux/truncate64.c (truncate64): Use INLINE_SYSCALL_CALL, __ALIGNMENT_ARG and SYSCALL_LL64 macros. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (truncate): Remove. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (truncate): Likewise. [1] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html |
||
Adhemerval Zanella
|
87686aeefd |
Consolidate Linux ftruncate implementations
THis patch consolidates all Linux ftruncate implementation on sysdeps/unix/sysv/linux/ftruncate{64}.c. It is based on {INTERNAL,INLINE}_SYSCALL patch [1] to simplify the syscall construction. General idea is to build ftruncate iff __OFF_T_MATCHES_OFF64_T is not defined, otherwise ftruncate64 will be build and ftruncate will be an alias. The fallocate will use old compat syscall and pass 32-bit off_t argument, while fallocate64 will handle the correct off64_t passing using __ALIGNMENT_ARG and SYSCALL_LL64 macros. Tested on x86_64, i386, aarch64, and armhf. * posix/tst-truncate-common.c: New file. * posix/tst-truncate.c: Use tst-truncate-common.c. * posix/tst-truncate64.c: Likewise and add LFS tests. * sysdeps/unix/sysv/linux/arm/ftruncate64.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/ftruncate.c: Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/ftruncate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/ftruncate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/ftruncate64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ftruncate64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/ftruncate64.c: Likewise. * sysdeps/unix/sysv/linux/ftruncate.c: New file. * sysdeps/unix/sysv/linux/ftruncate64.c (__ftruncate64): Use INLINE_SYSCALL_CALL, __ALIGNMENT_ARG and SYSCALL_LL64 macros. [__OFF_T_MATCHES_OFF64_T] (ftruncate): Add alias. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (ftruncate): Remove. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (ftruncate): Likewise. [1] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html |
||
Adhemerval Zanella
|
3c7f1f59cd |
Consolidate lseek/lseek64/llseek implementations
This patch consolidates all Linux lseek/lseek64/llseek implementation in on on sysdeps/unix/sysv/linux/lseek{64}.c. It also removes the llseek file and instead consolidate the LFS lseek implementation on lseek64.c as for other LFS symbols implementations. The general idea is: - lseek: ABIs that not define __OFF_T_MATCHES_OFF64_T will preferable use __NR__llseek if kernel supports it, otherwise they will use __NR_lseek. ABIs that defines __OFF_T_MATCHES_OFF64_T won't produce any symbol. - lseek64: ABIs with __OFF_T_MATCHES_OFF64_T will preferable use __NR_lseek (since it will use 64-bit arguments without low/high splitting) and __NR__llseek if __NR_lseek is not defined (for some ILP32 ports). - llseek: files will be removed and symbols will be aliased ot lseek64. ABI without __OFF_T_MATCHES_OFF64_T and without __NR_llseek (basically MIPS64n32 so far) are covered by building lseek with off_t as expected and lseek64 using __NR_lseek (as expected for off64_t being passed using 64-bit registers). For this consolidation I mantained the x32 assembly specific implementation because to correctly fix this it would required both the x32 fix for {INLINE,INTERNAL}_SYSCALL [1] and a wrapper to correctly subscribe it to return 64 bits instead of default 32 bits (as for times). It could a future cleanup. It is based on my previous {INTERNAL,INLINE}_SYSCALL_CALL macro [2], although it is mainly for simplification. Tested on x86_64, i686, aarch64, armhf, and powerpc64le. * nptl/Makefile (libpthread-routines): Remove ptw-llseek and add ptw-lseek64. * sysdeps/unix/sysv/linux/Makefile (sysdeps_routines): Remove llseek. * sysdeps/unix/sysv/linux/alpha/Makefile (sysdeps_routines): Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/llseek.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/lseek.c: Remove file. * sysdeps/unix/sysv/linux/mips/mips64/llseek.c: Likewise. * sysdeps/unix/sysv/linux/llseek.c: Remove file. * sysdeps/unix/sysv/linux/lseek.c: New file. * sysdeps/unix/sysv/linux/lseek64.c: Add default Linux implementation. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list: Remove lseek and __libc_lseek64 from auto-generation. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/lseek64.S: New file. [1] https://sourceware.org/ml/libc-alpha/2016-08/msg00443.html [2] https://sourceware.org/ml/libc-alpha/2016-08/msg00646.html |
||
Joseph Myers
|
eaf5ad0bc4 |
Add canonicalize, canonicalizef, canonicalizel.
TS 18661-1 defines canonicalize functions to produce a canonical version of a floating-point representation. This patch implements these functions for glibc. As with the iscanonical macro, these functions are oriented to the decimal floating-point case, where some values have both canonical and noncanonical representations. However, the functions have a return value that says whether they succeeded in storing a canonical result; thus, they can fail for the case of an invalid representation (while still not making any particular choice from among multiple equally canonical valid representations of the same value). Since no floating-point formats in glibc actually have noncanonical valid representations, a type-generic implementation of these functions can be used that expects iscanonical to return 0 only for invalid representations. Now that iscanonical is used within libm.so, libm_hidden_proto / libm_hidden_def are added for __iscanonicall. The definition of these functions is intended to correspond to a convertFormat operation to the same floating-point format. Thus, they convert signaling NaNs to quiet NaNs, raising the "invalid" exception. Such a conversion "should" produce "the canonical version of that signaling NaN made quiet". libm-test.inc is made to check NaN payloads for the output of these functions, a new feature (at some point manipulation functions such as fabs and copysign should have tests added that verify payload preservation for them). As however some architectures may not follow the recommended practice of preserving NaN payloads when converting a signaling NaN to quiet, a new math-tests.h macro SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008 MIPS; any other architectures seeing test failures for lack of payload preservation in this case should also define this macro to 0. (If any cases arise where the sign isn't preserved either, those should have a similar macro added.) The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and adapted to test canonicalizel as well on the same representations. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (canonicalize): New declaration. * math/Versions (canonicalize): New libm symbol at version GLIBC_2.25. (canonicalizef): Likewise. (canonicalizel): Likewise. * math/Makefile (gen-libm-calls): Add s_canonicalizeF. * math/s_canonicalize_template.c: New file. * math/libm-test.inc: Update comment on functions tested and testing of NaN payloads. (TEST_NAN_PAYLOAD): New macro. (NO_TEST_INLINE): Update value. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): New macro. (check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD. (struct test_Ffp_b1_data): New type. (RUN_TEST_Ffp_b1): New macro. (RUN_TEST_LOOP_Ffp_b1): Likewise. (canonicalize_test_data): New array. (canonicalize_test): New function. (main): Call canonicalize_test. * manual/arith.texi (FP Bit Twiddling): Document canonicalize, canonicalizef and canonicalizel. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file. * sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add canonicalize. (CFLAGS-nldbl-canonicalize.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move to ... * sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c: ... here. (do_test): Also test canonicalizel. * sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm. * sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall): Use libm_hidden_def. * sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ... * sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here. (do_test): Also test canonicalizel. * sysdeps/ieee754/ldbl-96/Makefile (tests): Change test-iscanonical-ldbl-96 to test-canonical-ldbl-96. * sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use libm_hidden_def. * sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New macro. * sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008] (SNAN_TESTS_PRESERVE_PAYLOAD): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Gabriel F. T. Gomes
|
6962682ffe |
Add strfromd, strfromf, and strfroml functions
ISO/IEC TS 18661-1 adds several functions in the strfrom family to stdlib. This patch adds strfromd, strfromf, and strfroml. This is being done in preparation for the new floating-point type, float128. The added functions convert a floating-point value into a string, with configurable format. |
||
Joseph Myers
|
f8e8b8ed9f |
Add getpayload, getpayloadf, getpayloadl.
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the getpayload functions for glibc; these extract the NaN payload (from an argument passed as a pointer, for which corresponding libm-test support is added) and return it in the same floating-point type. The return value of these functions is unspecified for non-NaN arguments; the patch does the simplest thing to implement, which is that the functions do not check whether the argument is a NaN and just treat the relevant bits of the representation as a payload regardless. A conversion from integer to floating-point is used to produce the required return value, except in the ldbl-128 case; as 128-bit integers are not supported for all configurations using ldbl-128, the code constructs the required floating-point representation of the return value directly instead. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (getpayload): New declaration. * math/Versions (getpayload): New libm symbol at version GLIBC_2.25. (getpayloadf): Likewise. (getpayloadl): Likewise. * math/Makefile (libm-calls): Add s_getpayloadF. * math/libm-test.inc: Include <nan-high-order-bit.h>. (struct test_f_f_data): Add comment. (RUN_TEST_fp_f): New macro. (RUN_TEST_LOOP_fp_f): Likewise. (getpayload_test_data): New array. (getpayload_test): New function. (main): Call getpayload_test. * math/gen-libm-test.pl (parse_args): Handle 'p' in argument descriptor. * manual/arith.texi (FP Bit Twiddling): Document getpayload, getpayloadf and getpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_getpayload.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise. * sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Joseph Myers
|
cc6a8d7457 |
Add totalordermag, totalordermagf, totalordermagl.
In addition to the totalorder functions, TS 18661-1 defines totalordermag functions, which do the same comparison but on the absolute values of the arguments. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. In general the implementations are similar to but simpler than those for the totalorder functions. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New macro. * math/Versions (totalordermag): New libm symbol at version GLIBC_2.25. (totalordermagf): Likewise. (totalordermagl): Likewise. * math/Makefile (libm-calls): Add s_totalordermagF. * math/libm-test.inc (totalordermag_test_data): New array. (totalordermag_test): New function. (main): Call totalordermag_test. * math/test-tgmath.c (NCALLS): Increase to 125. (F(compile_test)): Call totalordermag. (F(totalordermag)): New function. * manual/arith.texi (FP Comparison Functions): Document totalordermag, totalordermagf and totalordermagl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalordermag.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Likewise. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalordermag. (CFLAGS-nldbl-totalordermag.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Also test totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Adhemerval Zanella
|
7164580495 |
Fix posix_fadvise64 build on mips64n64
Recent binutils versions (at least 2.27) complains about libc.so when linking sotruss-lib.so with: libc.so:(*IND*+0x0): multiple definition of `posix_fadvise64@GLIBC_2.2' libc.so::(.text+0xcf940): first defined here libc.so:(*IND*+0x0): multiple definition of `posix_fadvise64' collect2: error: ld returned 1 exit status Dynamic symbols for libc.so shows (readelf --dyn-syms): 262: 000000000010b950 28 FUNC GLOBAL DEFAULT 12 posix_fadvise64@GLIBC_2.2 417: 000000000010b950 28 FUNC WEAK DEFAULT 12 posix_fadvise64@@GLIBC_2.2 1505: 000000000010b950 28 FUNC GLOBAL DEFAULT 12 posix_fadvise64@@GLIBC_2.3.3 That is, two separate definitions at version GLIBC_2.2. The issue is sysdeps/unix/sysv/linux/posix_fadvise64.c creates posix_fadvise64 weak_alias, while sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise64.c then adds compat_symbol / versioned_symbol calls. The patch remove the weak_alias definition on mips64 specific version so direct weak_alias is disabled. Checked on mips64n64 build with binutils 2.27.51.20161012. * sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise64.c: Undefine weak_alias. |
||
Joseph Myers
|
5e9d98a3d9 |
Add totalorder, totalorderf, totalorderl.
TS 18661-1 defines totalorder functions implementing the totalOrder comparison operation from IEEE 754-2008. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. (The totalordermag functions will be added in a separate patch.) The description of the totalOrder operation is complicated. However, for IEEE interchange binary formats and the preferred quiet NaN convention, what that complicated description means is that you interpret the representation as a sign-magnitude integer (with -0 coming before +0) and do a <= comparison on that interpretation. For finite values and infinities the ordering of the sign-magnitude integers is just the same as the ordering of floating-point values, so this extends that to all representations. (Different representations of the same floating-point value - which includes same quantum in the decimal case - must still be considered equal by this operation, but that issue doesn't arise for IEEE interchange binary formats.) So the complications are: * When MIPS quiet NaN conventions are in use, the representation of NaNs needs adjusting before making such an integer comparison. This patch does this adjustment only when both arguments are NaNs, as there's no need for it if only one is a NaN, and as long as both are NaNs you can just flip the relevant bits without any problems from this turning a NaN into an infinity. * For the m68k version of ldbl-96, where the high mantissa bit is "don't care" for infinities and NaNs, representations where it differs must compare the same. Note: although the testcase for this compiles, I have not actually tested on m68k. * For ldbl-128ibm, the low part must be ignored when the high part is NaN, and low parts of +0 and -0 must be considered the same whatever the high part. The new tests in libm-test.inc are the first tests there specifying particular payloads for input NaNs. Separate tests are also added for the ldbl-96 and ldbl-128ibm special cases where there are different representations of the same value that must compare equal (which can't be covered in libm-test.inc as that only specifies values, not representations). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New macro. * math/Versions (totalorder): New libm symbol at version GLIBC_2.25. (totalorderf): Likewise. (totalorderl): Likewise. * math/Makefile (libm-calls): Add s_totalorderF. * math/gen-libm-test.pl (parse_args): Escape quotes in test name string. * math/libm-test.inc (PAYLOAD_DIG): New macro. (qnan_value_pl): Likewise. (snan_value_pl): Likewise. (qnan_value): Define using qnan_value_pl. (snan_value): Define using snan_value_pl. (struct test_ff_i_data): Add comment about which tests use this structure. (RUN_TEST_ff_b): New macro. (RUN_TEST_LOOP_ff_b): Likewise. (totalorder_test_data): New array. (totalorder_test): New function. (main): Call totalorder_test. * math/test-tgmath.c (NCALLS): Increase to 122. (F(compile_test)): Call totalorder. (F(totalorder)): New function. * manual/arith.texi (FP Comparison Functions): Document totalorder, totalorderf and totalorderl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalorder.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalorder. (CFLAGS-nldbl-totalorder.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New file. * sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-128ibm. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file. * sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-96. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Adhemerval Zanella
|
5da2c626a5 |
Consolidate Linux sync_file_range implementations
This patch consolidates all the sync_file_range implementation for Linux in only one (sysdeps/unix/sysv/linux/sync_file_range.c). It also removes the syscall from the auto-generation using assembly macros (except for x86_64 due x32 [1]). For current minimum supported kernel (2.6.32 for x86_64 and 3.2 for all other architectures) either sync_file_range or sync_file_range2 is supported and it is expected that any future Linux ABI will provide either of one syscall. So the code path that returns ENOSYS in the case of missing syscall is removed. Checked on x86_64, i386, powerpc64le, aarch64, and armhf. * sysdeps/unix/sysv/linux/Makefile (tests): Add tst-sync_file_range. * sysdeps/unix/sysv/linux/mips/mips32/sync_file_range.c: Remove file. * sysdeps/sysv/linux/powerpc/powerpc64/sync_file_range.c: Likewise. * sysdeps/unix/sysv/linux/sync_file_range.c: New file. * sysdeps/unix/sysv/linux/tst-sync_file_range.c (sync_file_range): Consolidate all Linux implementations. [1] https://patchwork.ozlabs.org/patch/659794/ |
||
Adhemerval Zanella
|
96b7fe4243 |
Consolidate posix_fadvise implementations
This patch consolidates mostly of the Linux posix_fadvise{64} implementations on sysdeps/unix/sysv/linux/posix_fadvise{64}.c. It still keeps arch-specific files for: * S390-32: it uses a packed structure to pass all the arguments on syscall. It is the only supported port that implements __NR_fadvise64_64 in this way. * ARM: it does not implement __NR_fadvise64 (as other 32-bits ports), so posix_fadvise calls internal posix_fadvise64 symbol. * MIPS64 n64: it requires a different version number that other ports. The new macro SYSCALL_LL{64} is used to handle the offset argument and INTERNAL_SYSCALL_CALL to handle passing the correct number of expect arguments. The default Linux adds two new defines a port can use to control how __NR_fadvise64_64 passes the kernel arguments: * __ASSUME_FADVISE64_64_6ARG: the 'advise' argument is moved on second position. This is the case of powerpc32 and arm to avoid implement 7 argument syscall. * __ASSUME_FADVISE64_64_NO_ALIGN: for ABIs that defines __ASSUME_ALIGNED_REGISTER_PAIRS packs the offset without the leading '0'. This is the case of tile 32 bits. ARM also defines __NR_fadvise64_64 as __NR_arm_fadvise64_64 (which is also handled on arch kernel-feature.h). Tested on x86_64, x32, i686, armhf, and aarch64. * posix/Makefile (tests): Add tst-posix_fadvise and tst-posix_fadvise64. * posix/tst-posix_fadvise.c: New file. * posix/tst-posix_fadvise64.c: Likewise. * posix/tst-posix_fadvise-common.c: Likewise. * sysdeps/unix/sysv/linux/arm/kernel-features.h (__ASSUME_FADVISE64_64_6ARG): Define. * sysdeps/unix/sysv/linux/powerpc/kernel-features.h [!__powerpc64__] (__ASSUME_FADVISE64_64_6ARG): Add define. * sysdeps/unix/sysv/linux/arm/posix_fadvise64.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/posix_fadvise.c: Likewise. * sysdeps/unix/sysv/linux/i386/posix_fadvise64.S: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/posix_fadvise.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/posix_fadvise64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/posix_fadvise.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/posix_fadvise64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/posix_fadvise.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/posix_fadvise64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/posix_fadvise.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/posix_fadvise64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise64.c (SHLIB_COMPAT(libc, GLIBC_2_2, GLIBC_2_3_3) [__posix_fadvise64_l64]: Alias to __posix_fadvise64_l32. (SHLIB_COMPAT(libc, GLIBC_2_2, GLIBC_2_3_3) [__posix_fadvise64_l32]: Add compat definition to posix_fadvise64. (SHLIB_COMPAT(libc, GLIBC_2_2, GLIBC_2_3_3) [__posix_fadvise64_l64]: Add versioned definition to posix_fadvise64. * sysdeps/unix/sysv/linux/posix_fadvise.c (posix_fadvise): Build iff __OFF_T_MATCHES_OFF64_T is defined, use INTERNAL_SYSCALL_CALL, add __ASSUME_FADVISE64_64_6ARG/__ASSUME_FADVISE64_64_NO_ALIGN support. * sysdeps/unix/sysv/linux/posix_fadvise64.c (posix_fadvise64): Add __ASSUME_FADVISE64_64_NO_ALIGN support and use INTERNAL_SYSCALL_CALL. |
||
Adhemerval Zanella
|
45ff2bfcb3 |
Consolidate posix_fallocate{64} implementations
This patch consolidates all the posix_fallocate{64} implementation for Linux in only one (sysdeps/unix/sysv/linux/posix_fallocate{64}.c). It also removes the syscall from the auto-generation using assembly macros. The macro SYSCALL_LL{64} is used to handle the offset argument along with the new INTERNAL_SYSCALL_CALL macro to define correct argument count for internal INTERNAL_SYSCALL call. Tested on x86_64, i686, x32, aarch64, ppc64le, and armhf. * io/Makefile (tests): Add tst-posix_fallocate and tst-posix_fallocate64. * io/tst-posix_fallocate-common.c: New file. * io/tst-posix_fallocate.c: Likewise. * io/tst-posix_fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/posix_fallocate.c: Remove file. * sysdeps/unix/sysv/linux/mips/mips64/n32/posix_fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fallocate.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/posix_fallocate.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/posix_fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/posix_fallocate.c (posix_fallocate): Use SYSCALL_LL to pass both offset and len arguments. * sysdeps/unix/sysv/linux/posix_fallocate64.c (posix_fallocate64): Likewise. * sysdeps/unix/sysv/linux/x86_64/syscalls.list (pwrite64): Add __libc_pwrite64 alias used by posix_fallocate64. |
||
Adhemerval Zanella
|
6c63e2d8df |
Consolidate fallocate{64} implementations
This patch consolidates all the fallocate{64} implementation for Linux in only one (sysdeps/unix/sysv/linux/fallocate{64}.c). It also removes the syscall from the auto-generation using assembly macros. The new macro SYSCALL_LL{64} is used to handle the offset argument. Checked on x86_64, x32, i386, aarch64, and ppc64le. * sysdeps/unix/sysv/linux/Makefile (test): Add tst-fallocate and tst-fallocate64. * sysdeps/unix/sysv/linux/tst-fallocate.c: New file. * sysdeps/unix/sysv/linux/tst-fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/tst-fallocate-common.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/fallocate.c: Remove file. * sysdeps/unix/sysv/linux/mips/mips64/n32/fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/fallocate.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/fallocate.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/fallocate64.c: Likewise. * sysdeps/unix/sysv/linux/fallocate.c (fallocate): Use SYSCALL_LL macro on offset argument. * sysdeps/unix/sysv/linux/fallocate64.c (fallocate64): Use SYSCALL_LL64 on offset argument. * test-skeleton.c (FAIL_RET): Add macro. (FAIL_EXIT): Likewise. (FAIL_EXIT1): Likewise. (_FAIL): Likewise. |
||
Joseph Myers
|
1e7c8fcca5 |
Add iseqsig.
TS 18661-1 adds an iseqsig type-generic comparison macro to <math.h>. This macro is like the == operator except that unordered operands result in the "invalid" exception and errno being set to EDOM. This patch implements this macro for glibc. Given the need to set errno, this is implemented with out-of-line functions __iseqsigf, __iseqsig and __iseqsigl (of which the last only exists at all if long double is ABI-distinct from double, so no function aliases or compat support are needed). The present patch ignores excess precision issues; I intend to deal with those in a followup patch. (Like comparison operators, type-generic comparison macros should *not* convert operands to their semantic types but should preserve excess range and precision, meaning that for some argument types and values of FLT_EVAL_METHOD, an underlying function should be called for a wider type than that of the arguments.) The underlying functions are implemented with the type-generic template machinery. Comparing x <= y && x >= y is sufficient in ISO C to achieve an equality comparison with "invalid" raised for unordered operands (and the results of those two comparisons can also be used to tell whether errno needs to be set). However, some architectures have GCC bugs meaning that unordered comparison instructions are used instead of ordered ones. Thus, a mechanism is provided for architectures to use an explicit call to feraiseexcept to raise exceptions if required. If your architecture has such a bug you should add a fix-fp-int-compare-invalid.h header for it, with a comment pointing to the relevant GCC bug report; if such a GCC bug is fixed, that header's contents should have a __GNUC_PREREQ conditional added so that the workaround can eventually be removed for that architecture. Tested for x86_64, x86, mips64, arm and powerpc. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): New macro. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__iseqsig): New declaration. * math/s_iseqsig_template.c: New file. * math/Versions (__iseqsigf): New libm symbol at version GLIBC_2.25. (__iseqsig): Likewise. (__iseqsigl): Likewise. * math/libm-test.inc (iseqsig_test_data): New array. (iseqsig_test): New function. (main): Call iseqsig_test. * math/Makefile (gen-libm-calls): Add s_iseqsigF. * manual/arith.texi (FP Comparison Functions): Document iseqsig. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/generic/fix-fp-int-compare-invalid.h: New file. * sysdeps/powerpc/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/x86/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Joseph Myers
|
ec94343f59 |
Add femode_t functions.
TS 18661-1 defines a type femode_t to represent the set of dynamic floating-point control modes (such as the rounding mode and trap enablement modes), and functions fegetmode and fesetmode to manipulate those modes (without affecting other state such as the raised exception flags) and a corresponding macro FE_DFL_MODE. This patch series implements those interfaces for glibc. This first patch adds the architecture-independent pieces, the x86 and x86_64 implementations, and the <bits/fenv.h> and ABI baseline updates for all architectures so glibc keeps building and passing the ABI tests on all architectures. Subsequent patches add the fegetmode and fesetmode implementations for other architectures. femode_t is generally an integer type - the same type as fenv_t, or as the single element of fenv_t where fenv_t is a structure containing a single integer (or the single relevant element, where it has elements for both status and control registers) - except where architecture properties or consistency with the fenv_t implementation indicate otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic pointer value (-1 cast to const femode_t *), a value that can be distinguished from valid pointers by its high bits but otherwise contains a representation of the desired register contents, or a pointer to a constant variable (the powerpc case; __fe_dfl_mode is added as an exported constant object, an alias to __fe_dfl_env). Note that where architectures (that share a register between control and status bits) gain definitions of new floating-point control or status bits in future, the implementations of fesetmode for those architectures may need updating (depending on whether the new bits are control or status bits and what the implementation does with previously unknown bits), just like existing implementations of <fenv.h> functions that take care not to touch reserved bits may need updating when the set of reserved bits changes. (As any new bits are outside the scope of ISO C, that's just a quality-of-implementation issue for supporting them, not a conformance issue.) As with fenv_t, femode_t should properly include any software DFP rounding mode (and for both fenv_t and femode_t I'd consider that fragment of DFP support appropriate for inclusion in glibc even in the absence of the rest of libdfp; hardware DFP rounding modes should already be included if the definitions of which bits are status / control bits are correct). Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). Other architecture versions are untested. * math/fegetmode.c: New file. * math/fesetmode.c: Likewise. * sysdeps/i386/fpu/fegetmode.c: Likewise. * sysdeps/i386/fpu/fesetmode.c: Likewise. * sysdeps/x86_64/fpu/fegetmode.c: Likewise. * sysdeps/x86_64/fpu/fesetmode.c: Likewise. * math/fenv.h: Update comment on inclusion of <bits/fenv.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * manual/arith.texi (FE_DFL_MODE): Document macro. (fegetmode): Document function. (fesetmode): Likewise. * math/Versions (fegetmode): New libm symbol at version GLIBC_2.25. (fesetmode): Likewise. * math/Makefile (libm-support): Add fegetmode and fesetmode. (tests): Add test-femode and test-femode-traps. * math/test-femode-traps.c: New file. * math/test-femode.c: Likewise. * sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as alias for __fe_dfl_env. * sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at version GLIBC_2.25. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Joseph Myers
|
780257d48d |
Add fetestexceptflag.
TS 18661-1 defines an fetestexceptflag function to test the exception state saved in an fexcept_t object by fegetexceptflag. This patch implements this function for glibc. Almost all architectures save exception state in such a way that it can be directly ANDed with exception flag bits, so rather than having lots of fetestexceptflag implementations that all do the same thing, the math/ implementation is made to use this generic logic (which is also OK in the fallback case where FE_ALL_EXCEPT is zero). The only architecture that seems to need anything different is s390. (fegetexceptflag and fesetexceptflag use abbreviated filenames fgetexcptflg.c and fsetexcptflg.c. Because we are no longer concerned by 14-character filename limits, fetestexceptflag uses the obvious filename fetestexceptflag.c.) The NEWS entry is intended to be expanded along the lines given in <https://sourceware.org/ml/libc-alpha/2016-08/msg00356.html> when fegetmode and fesetmode are added. Tested for x86_64, x86, mips64 and powerpc. * math/fetestexceptflag.c: New file. * sysdeps/s390/fpu/fetestexceptflag.c: Likewise. Comment by Stefan Liebler. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fetestexceptflag): New function declaration. * manual/arith.texi (fetestexceptflag): Document function. * math/Versions (fetestexceptflag): New libm symbol at version GLIBC_2.25. * math/Makefile (libm-support): Add fetestexceptflag. (tests): Add test-fetestexceptflag. * math/test-fetestexceptflag.c: New file. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Joseph Myers
|
5146356f5a |
Add fesetexcept.
TS 18661-1 defines an fesetexcept function for setting floating-point exception flags without the side-effect of causing enabled traps to be taken. This patch series implements this function for glibc. The present patch adds the fallback stub implementation, x86 and x86_64 implementations, documentation, tests and ABI baseline updates. The remaining patches, some of them untested, add implementations for other architectures. The implementations generally follow those of the fesetexceptflag function. As for fesetexceptflag, the approach taken for architectures where setting flags causes enabled traps to be taken is to set the flags (and potentially cause traps) rather than refusing to set the flags and returning an error. Since ISO C and TS 18661 provide no way to enable traps, this is formally in accordance with the standards. The NEWS entry should be considered a placeholder, since this patch series is intended to be followed by further such series adding other TS 18661-1 features, so that the NEWS entry would end up looking more like * New <fenv.h> features from TS 18661-1:2014 are added to libm: the fesetexcept, fetestexceptflag, fegetmode and fesetmode functions, the femode_t type and the FE_DFL_MODE macro. with hopefully more such entries for other features, rather than having an entry for a single function in the end. I believe we have consensus for adding TS 18661-1 interfaces as per <https://sourceware.org/ml/libc-alpha/2016-06/msg00421.html>. Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). * math/fesetexcept.c: New file. * sysdeps/i386/fpu/fesetexcept.c: Likewise. * sysdeps/x86_64/fpu/fesetexcept.c: Likewise. * math/fenv.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetexcept): New function declaration. * manual/arith.texi (fesetexcept): Document function. * math/Versions (fesetexcept): New libm symbol at version GLIBC_2.25. * math/Makefile (libm-support): Add fesetexcept. (tests): Add test-fesetexcept and test-fesetexcept-traps. * math/test-fesetexcept.c: New file. * math/test-fesetexcept-traps.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Zack Weinberg
|
63eb8df85a |
Minimize sysdeps code involved in defining major/minor/makedev.
Presently sys/sysmacros.h is entirely defined in sysdeps. This would mean that the deprecation logic coming up in the next patch would have to be written twice (in generic/ and unix/sysv/linux/). To avoid that, hoist all but the unavoidably system-dependent logic to misc/, leaving a bits/ header behind. This also promotes the Linux-specific encoding of dev_t, which accommodates 32-bit major and minor numbers in a 64-bit dev_t, to generic, as glibc's dev_t is always 64 bits wide. The former Linux implementation used inline functions to avoid evaluating arguments more than once. After this change, all platforms use inline functions, which means that three new symbols are added to the generic ABI. (These symbols are in the user namespace, which is how they have always been on Linux. They begin with "gnu_dev_", so collisions with user code are pretty unlikely.) New ports henceforth need only provide a bits/sysmacros.h defining internal macros __SYSMACROS_{DECLARE,DEFINE}_{MAJOR,MINOR,MAKEDEV}. This is only necessary if the kernel encoding is incompatible with the now-generic encoding (for instance, it would be necessary for FreeBSD). While I was at it, I added a basic round-trip test for these functions. * sysdeps/generic/sys/sysmacros.h: Delete file. * sysdeps/unix/sysv/linux/makedev.c: Delete file. * sysdeps/unix/sysv/linux/sys/sysmacros.h: Move file ... * bits/sysmacros.h: ... here; this encoding is now the generic encoding. Now defines only the following macros: __SYSMACROS_DECLARE_MAJOR, __SYSMACROS_DEFINE_MAJOR, __SYSMACROS_DECLARE_MINOR, __SYSMACROS_DEFINE_MINOR, __SYSMACROS_DECLARE_MAKEDEV, __SYSMACROS_DEFINE_MAKEDEV. * misc/sys/sysmacros.h, misc/makedev.c: New files that use bits/sysmacros.h and the above new macros to generate the public implementations of major, minor, and makedev. * misc/tst-makedev.c: New test. * include/sys/sysmacros.h: New wrapper. * misc/Makefile (headers): Add sys/sysmacros.h, bits/sysmacros.h. (routines): Add makedev. (tests): Add tst-makedev. * misc/Versions [GLIBC_2.25]: Add gnu_dev_major, gnu_dev_minor, gnu_dev_makedev. * posix/Makefile (headers): Remove sys/sysmacros.h. * sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove makedev. * sysdeps/arm/nacl/libc.abilist: Add GLIBC_2.25, gnu_dev_major, gnu_dev_makedev, gnu_dev_minor. * sysdeps/unix/sysv/linux/aarch64/libc.abilist * sysdeps/unix/sysv/linux/alpha/libc.abilist * sysdeps/unix/sysv/linux/arm/libc.abilist * sysdeps/unix/sysv/linux/hppa/libc.abilist * sysdeps/unix/sysv/linux/i386/libc.abilist * sysdeps/unix/sysv/linux/ia64/libc.abilist * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist * sysdeps/unix/sysv/linux/microblaze/libc.abilist * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist * sysdeps/unix/sysv/linux/nios2/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist * sysdeps/unix/sysv/linux/sh/libc.abilist * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Add GLIBC_2.25. |
||
Rajalakshmi Srinivasaraghavan
|
41a359e22f |
Add nextup and nextdown math functions
TS 18661 adds nextup and nextdown functions alongside nextafter to provide support for float128 equivalent to it. This patch adds nextupl, nextup, nextupf, nextdownl, nextdown and nextdownf to libm before float128 support. The nextup functions return the next representable value in the direction of positive infinity and the nextdown functions return the next representable value in the direction of negative infinity. These are currently enabled as GNU extensions. |
||
Adhemerval Zanella
|
78880cc185 |
Revert {send,sendm,recv,recvm}msg conformance changes
After some discussion in libc-alpha about this POSIX compliance fix, I see that GLIBC should indeed revert back to previous definition of msghdr and cmsghdr and implementation of sendmsg, recvmsg, sendmmsg, recvmmsg due some reasons: * The possible issue where the syscalls wrapper add the compatibility layer is quite limited in scope and range. And kernel current also add some limits to the values on the internal msghdr and cmsghdr fields: - msghdr::msg_iovlen larger than UIO_MAXIOV (1024) returns EMSGSIZE. - msghdr::msg_controllen larger than INT_MAX returns ENOBUFS. * There is a small performance hit for recvmsg/sendmsg/recmmsg which is neglectable, but it is a big hit for sendmmsg since now instead of calling the syscall for the packed structure, GLIBC is calling multiple sendmsg. This defeat the very existence of the syscall. * It currently breaks libsanitizer build on GCC [1] (I fixed on compiler-rt). However the fix is incomplete because it does add any runtime check since libsanitizer currently does not have any facility to intercept symbols with multiple version [2]. This, along with incorret dlsym/dlvsym return for versioned symbol due another bug [3], makes hard to interpose versioned symbols. Also, current approach of fixing GCC PR#71445 leads to half-baked solutions without versioned symbol interposing. This patch basically reverts commits |
||
Carlos O'Donell
|
47dd3543d3 |
Bug 20198: quick_exit should not call destructors.
In C++11 18.5.12 says "Objects shall not be destroyed as a result of calling quick_exit." In C11 quick_exit is silent about thread object destruction. Therefore to make glibc C++ compliant we do not call any thread local destructors. A new regression test verifies the fix. I will note that C++11 18.5.3 makes it clear that C++ defines additional requirements for _Exit() to prevent it from executing destructors. Given that the point of _Exit() is to terminate the process immediately it makes sense the C and C++ should line up and avoid calling destructors. No failures. New regtest passes. |
||
Adhemerval Zanella
|
af5fdf5a35 |
Consolidate pwritev/pwritev64 implementations
This patch consolidates all the pwritev{64} implementation for Linux in only one (sysdeps/unix/sysv/linux/pwritev{64}.c). It also removes the syscall from the auto-generation using assembly macros. It was based on previous pwrite/pwrite64 consolidation patch. The new macro SYSCALL_LL{64} is used to handle the offset argument and alias is created for __ASSUME_OFF_DIFF_OFF64 in case of pread64. Checked on x86_64, i386, aarch64, and powerpc64le. * misc/Makefile (CFLAGS-pwritev.c): New variable: add cancellation required flags. (CFLAGS-pwritev64.c): Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/pwritev.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/pwritev64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/pwritev64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/pwritev.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/pwritev64.: Likwise. * sysdeps/unix/sysv/linux/x86_64/x32/syscalls.list (pwritev): Remove syscall from auto-generation. * sysdeps/unix/sysv/linux/pwritev.c: Rewrite implementation. [WORDSIZE == 64] (pwritev64): Remove macro. [!PWRITEV] (PWRITEV): Likewise. [!PWRITEV] (PWRITEV_REPLACEMENT): Likewise. [!PWRITEV] (PWRITE): Likewise. [!PWRITEV] (OFF_T): Likewise. [!__ASSUME_PWRITEV] (PWRITEV_REPLACEMENT): Likewise. (LO_HI_LONG): Remove macro. [__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pwritev): Add function. * sysdeps/unix/sysv/linux/pwritev64.c: Rewrite implementation. (PWRITEV): Remove macro. (PWRITEV_REPLACEMENTE): Likewise. (PWRITE): Likewise. (OFF_T): Likewise. (pwritev64): New function. * nptl/tst-cancel4.c (tf_writev): Add test. |
||
Adhemerval Zanella
|
4e77815173 |
Consolidate preadv/preadv64 implementation
This patch consolidates all the preadv{64} implementation for Linux in only one (sysdeps/unix/sysv/linux/preadv{64}.c). It also removes the syscall from the auto-generation using assembly macros. It was based on previous pread/pread64 consolidation patch. The new macro SYSCALL_LL{64} is used to handle the offset argument and alias is created for __ASSUME_OFF_DIFF_OFF64 in case of pread64. Checked on x86_64, i386, aarch64, and powerpc64le. * misc/Makefile (CFLAGS-preadv.c): New variable: add cancellation required flags. (CFLAGS-preadv64.c): Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/preadv.c: Remove file. * sysdeps/unix/sysv/linux/generic/wordsize-32/preadv64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/preadv64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/preadv.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/preadv64.: Likwise. * sysdeps/unix/sysv/linux/x86_64/x32/syscalls.list (preadv): Remove syscall from auto-generation. * sysdeps/unix/sysv/linux/preadv.c: Rewrite implementation. [WORDSIZE == 64] (preadv64): Remove macro. [!PREADV] (PREADV): Likewise. [!PREADV] (PREADV_REPLACEMENT): Likewise. [!PREADV] (PREAD): Likewise. [!PREADV] (OFF_T): Likewise. [!__ASSUME_PREADV] (PREADV_REPLACEMENT): Likewise. (LO_HI_LONG): Remove macro. [__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (preadv): Add function. * sysdeps/unix/sysv/linux/preadv64.c: Rewrite implementation. (PREADV): Remove macro. (PREADV_REPLACEMENTE): Likewise. (PREAD): Likewise. (OFF_T): Likewise. (preadv64): New function. * nptl/tst-cancel4.c (tf_preadv): Add test. |
||
Adhemerval Zanella
|
222c2d7f43 |
network: recvmmsg and sendmmsg standard compliance (BZ#16919)
POSIX specifies that both msghdr::msg_iovlen and msghdr::msg_controllen to be of size int and socklen_t respectively, however Linux implements it as a size_t. So for 64-bits architecture where sizeof of size_t is larger than socklen_t, both sendmmsg and recvmmsg need to adjust the mmsghdr::msg_hdr internal fields before issuing the syscall itself. This patch fixes it by operating on the padding if it the case. For recvmmsg, the most straightfoward case, only zero padding the fields is suffice. However, for sendmmsg, where adjusting the buffer is out of the contract (since it may point to a read-only data), the function is rewritten to use sendmsg instead (which from previous patch allocates a temporary msghdr to operate on). Also for 64-bit ports that requires it, a new recvmmsg and sendmmsg compat version is created (which uses size_t for both cmsghdr::cmsg_len and internal Tested on x86_64, i686, aarch64, armhf, and powerpc64le. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = socket] (sysdep_routines): Add oldrecvmmsg and oldsendmmsg. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Add recvmmsg and sendmmsg. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/oldrecvmmsg.c: New file. * sysdeps/unix/sysv/linux/oldsendmmsg.c: Likewise. * sysdeps/unix/sysv/linux/recvmmsg.c (__recvmmsg): Adjust msghdr iovlen and controllen fields to adjust to POSIX specification. * sysdeps/unix/sysv/linux/sendmmsg.c (__sendmmsg): Likewise. |
||
Adhemerval Zanella
|
af7f7c7ec8 |
network: recvmsg and sendmsg standard compliance (BZ#16919)
POSIX specifies that both msghdr::msg_iovlen and msghdr::msg_controllen to be of size int and socklen_t respectively. However Linux defines it as both size_t and for 64-bit it requires some adjustments to make the functions standard compliance. This patch fixes it by creating a temporary header and zeroing the pad fields for 64-bits architecture where size of size_t exceeds the size of the int. Also the new recvmsg and sendmsg implementation is only added on libc, with libpthread only containing a compat symbol. Tested on x86_64, i686, aarch64, armhf, and powerpc64le. * conform/data/sys/socket.h-data (msghdr.msg_iovlen): Remove xfail- and change to correct expected type. (msghdr.msg_controllen): Likewise. (cmsghdr.cmsg_len): Likewise. * sysdeps/unix/sysv/linux/bits/socket.h (msghdr.msg_iovlen): Fix expected POSIX assumption about the size. (msghdr.msg_controllen): Likewise. (msghdr.__glibc_reserved1): Likewise. (msghdr.__glibc_reserved2): Likewise. (cmsghdr.cmsg_len): Likewise. (cmsghdr.__glibc_reserved1): Likewise. * nptl/Makefile (libpthread-routines): Remove ptw-recvmsg and ptw-sendmsg. Add ptw-oldrecvmsg and ptw-oldsendmsg. (CFLAGS-sendmsg.c): Remove rule. (CFLAGS-recvmsg.c): Likewise. (CFLAGS-oldsendmsg.c): Add rule. (CFLAGS-oldrecvmsg.c): Likewise. * sysdeps/unix/sysv/linux/alpha/Versions [libc] (GLIBC_2.24): Add recvmsg and sendmsg. * sysdeps/unix/sysv/linux/aarch64/Version [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/arm/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/ia64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/m68k/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/microblaze/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/nios2/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/powerpc/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sh/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sparc/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/Versions [libc] (GLIBC_2.24): Likewise. ( sysdeps/unix/sysv/linux/tile/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/Versions [libc] (GLIBC_2.24): Likewise. ( sysdeps/unix/sysv/linux/x86_64/64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/x84_64/Versions [libc] (GLIBC_2.24): Likewise. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = socket)] (sysdep_headers): Add oldrecvmsg and oldsendmsg. (CFLAGS-sendmsg.c): Add rule. (CFLAGS-recvmsg.c): Likewise. (CFLAGS-oldsendmsg.c): Likewise. (CFLAGS-oldrecvmsg.c): Likewise. * sysdeps/unix/sysv/linux/check_native.c (__check_native): Fix msghdr initialization. * sysdeps/unix/sysv/linux/check_pf.c (make_request): Likewise. * sysdeps/unix/sysv/linux/ifaddrs.c (__netlink_request): Likewise. * sysdeps/unix/sysv/linux/oldrecvmsg.c: New file. * sysdeps/unix/sysv/linux/oldsendmsg.c: Likewise. * sysdeps/unix/sysv/linux/recvmsg.c (__libc_recvmsg): Adjust msghdr iovlen and controllen fields to adjust to POSIX specification. * sysdeps/unix/sysv/linux/sendmsg.c (__libc_sendmsg): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: New version and added recvmsg and sendmsg. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdepe/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. Likewise. Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. |
||
Matthew Fortune
|
b39d84adff |
VDSO support for MIPS
This patch adds support for using the implementations of gettimeofday() and clock_gettime() provided by the kernel in the VDSO. The VDSO will always provide clock_gettime() as CLOCK_{REALTIME,MONOTONIC}_COARSE can be implemented regardless of platform. CLOCK_{REALTIME,MONOTONIC}, along with gettimeofday(), are only implemented on platforms which make use of either the CP0 count or GIC as their clocksource. On other platforms, the VDSO does not provide the __vdso_gettimeofday symbol, as it is never useful. The VDSO functions return ENOSYS when they encounter an unsupported request, in which case glibc should fall back to the standard syscall. Tested with upstream kernel 4.5 and QEMU emulating Malta. ./vdsotest gettimeofday bench gettimeofday: syscall: 1021 nsec/call gettimeofday: libc: 262 nsec/call gettimeofday: vdso: 174 nsec/call * sysdeps/unix/sysv/linux/mips/Makefile (sysdep_routines): Include dl-vdso. * sysdeps/unix/sysv/linux/mips/Versions: Add __vdso_clock_gettime. * sysdeps/unix/sysv/linux/mips/init-first.c: New file. * sysdeps/unix/sysv/linux/mips/libc-vdso.h: New file. * sysdeps/unix/sysv/linux/mips/mips32/sysdep.h: (INTERNAL_VSYSCALL_CALL): Define to be compatible with MIPS definitions of INTERNAL_SYSCALL_{ERROR_P,ERRNO}. (HAVE_CLOCK_GETTIME_VSYSCALL): Define. (HAVE_GETTIMEOFDAY_VSYSCALL): Define. * sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h: Likewise. |
||
Joseph Myers
|
5163b4b76f |
Fix MIPS mmap negative offset handling for consistency (bug 19550).
The handling of negative offsets in MIPS mmap is inconsistent with other architectures, as shown by failure of the test posix/tst-mmap-offset for o32 and n32. The MIPS mmap syscall uses a signed argument and does a signed arithmetic shift on it, whereas the glibc semantics expected by that test are for the offset to be considered as a large positive offset. This patch makes MIPS consistent with other architectures as far as possible by using the mmap2 syscall on o32 (#including the generic implementation), and making mmap not an alias for mmap64 for n32, with a custom implementation for n32 that zero-extends the offset argument to 64-bit before calling the mmap syscall. Tested for MIPS64 (o32, n32, n64). [BZ #19550] * sysdeps/unix/sysv/linux/mips/mips32/mmap.c: New file. * sysdeps/unix/sysv/linux/mips/mips64/mmap64.c: Move to .... * sysdeps/unix/sysv/linux/mips/mips64/n64/mmap64.c: ... here. * sysdeps/unix/sysv/linux/mips/mips64/n32/mmap.c: New file. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (mmap64): New syscall entry. * sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list (mmap): New syscall entry. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (mmap): Remove syscall entry. |
||
Joseph Myers
|
f7a9f785e5 | Update copyright dates with scripts/update-copyrights. | ||
Dmitry V. Levin
|
e0043e17df |
Fix linux personality syscall wrapper
The personality system call, starting with linux kernel commit v2.6.29-6609-g11d06b2a1e5658f448a308aa3beb97bacd64a940, always successfully changes the personality if requested. The syscall wrapper, however, still can return an error in the following cases: - the value returned by the system call looks like an error due to architecture limitations of 32-bit kernels; - a personality greater than 0xffffffff is passed to the system call, and the 64-bit kernel does not have commit v2.6.35-rc1-372-g485d527686850d68a0e9006dd9904f19f122485e that would truncate this value to unsigned int; - on sparc64, the value returned by the system call looks like an error due to sparc64 kernel sign extension bug. The solution is three-fold: - move generic syscalls.list personality entry to generic 64-bit syscalls.list file; - for each 32-bit architecture that use negated errno semantics, add a NOERRNO personality entry to their syscalls.list file; - for sparc64 and 32-bit architectures that use dedicated registers to flag syscall errors, add a wrapper around personality syscall; if the system call return value is flagged as an error, this wrapper returns the negated "would be errno" value, otherwise it returns the system call return value; on sparc64, it also truncates the personality argument to unsigned int before passing it to the kernel. [BZ #19408] * sysdeps/unix/sysv/linux/personality.c: New file. * sysdeps/unix/sysv/linux/sparc/sparc64/personality.c: Likewise. * sysdeps/unix/sysv/linux/tst-personality.c: Likewise. * sysdeps/unix/sysv/linux/Makefile [$(subdir) == misc] (sysdep_routines): Add personality. (tests): Add tst-personality. * sysdeps/unix/sysv/linux/syscalls.list (personality): Move ... * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: ... here. * sysdeps/unix/sysv/linux/arm/syscalls.list (personality): New entry. * sysdeps/unix/sysv/linux/hppa/syscalls.list (personality): Likewise. * sysdeps/unix/sysv/linux/i386/syscalls.list (personality): Likewise. * sysdeps/unix/sysv/linux/m68k/syscalls.list (personality): Likewise. * sysdeps/unix/sysv/linux/microblaze/syscalls.list (personality): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (personality): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list (personality): Likewise. * sysdeps/unix/sysv/linux/sh/syscalls.list (personality): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/syscalls.list (personality): Likewise. |
||
Joseph Myers
|
d709042a6e |
Fix lgamma setting signgam for ISO C (bug 15421).
The lgamma (and likewise lgammaf, lgammal) function wrongly sets the signgam variable even when building for strict ISO C conformance (-std=c99 / -std=c11), although the user may define such a variable and it's only in the implementation namespace for POSIX with XSI extensions enabled. Following discussions starting at <https://sourceware.org/ml/libc-alpha/2013-04/msg00767.html> and <https://sourceware.org/ml/libc-alpha/2015-10/msg00844.html>, it seems that the safest approach for fixing this particular issue is for signgam to become a weak alias for a newly exported symbol __signgam, with the library functions only setting __signgam, at which point static linker magic will preserve the alias for newly linked binaries that refer to the library's signgam rather than defining their own, while breaking the alias for programs that define their own signgam, with new symbol versions for lgamma functions and with compat symbols for existing binaries that set both signgam and __signgam. This patch implements that approach for the fix. signgam is made into a weak alias. The four symbols __signgam, lgamma, lgammaf, lgammal get new symbol versions at version GLIBC_2.23, with the existing versions of lgamma, lgammaf and lgammal becoming compat symbols. When the compat versions are built, gamma, gammaf and gammal are aliases for the compat versions (i.e. always set signgam); this is OK as they are not ISO C functions, and avoids adding new symbol versions for them unnecessarily. When the compat versions are not built (i.e. for static linking and for future glibc ports), gamma, gammaf and gammal are aliases for the new versions that set __signgam. The ldbl-opt versions are updated accordingly. The lgamma wrappers are adjusted so that the same source files, included from different files with different definitions of USE_AS_COMPAT, can build either the new versions or the compat versions. Similar changes are made to the ia64 versions (untested). Tests are added that the lgamma functions do not interfere with a user variable called signgam for ISO C, with various choices for the size of that variable, whether it is initialized, and for static and dynamic linking. The conformtest whitelist entry is removed as well. Tested for x86_64, x86, mips64 and powerpc, including looking at objdump --dynamic-syms output to make sure the expected sets of symbols were aliases. Also spot-tested that a binary built with old glibc works properly (i.e. gets signgam set) when run with new glibc. [BZ #15421] * sysdeps/ieee754/s_signgam.c (signgam): Rename to __signgam, initialize with 0 and define as weak alias of __signgam. * include/math.h [!_ISOMAC] (__signgam): Declare. * math/Makefile (libm-calls): Add w_lgamma_compat. (tests): Add test-signgam-uchar, test-signgam-uchar-init, test-signgam-uint, test-signgam-uint-init, test-signgam-ullong and test-signgam-ullong-init. (tests-static): Add test-signgam-uchar-static, test-signgam-uchar-init-static, test-signgam-uint-static, test-signgam-uint-init-static, test-signgam-ullong-static and test-signgam-ullong-init-static. (CFLAGS-test-signgam-uchar.c): New variable. (CFLAGS-test-signgam-uchar-init.c): Likewise. (CFLAGS-test-signgam-uchar-static.c): Likewise. (CFLAGS-test-signgam-uchar-init-static.c): Likewise. (CFLAGS-test-signgam-uint.c): Likewise. (CFLAGS-test-signgam-uint-init.c): Likewise. (CFLAGS-test-signgam-uint-static.c): Likewise. (CFLAGS-test-signgam-uint-init-static.c): Likewise. (CFLAGS-test-signgam-ullong.c): Likewise. (CFLAGS-test-signgam-ullong-init.c): Likewise. (CFLAGS-test-signgam-ullong-static.c): Likewise. (CFLAGS-test-signgam-ullong-init-static.c): Likewise. * math/Versions (libm): Add GLIBC_2.23. * math/lgamma-compat.h: New file. * math/test-signgam-main.c: Likewise. * math/test-signgam-uchar-init-static.c: Likewise. * math/test-signgam-uchar-init.c: Likewise. * math/test-signgam-uchar-static.c: Likewise. * math/test-signgam-uchar.c: Likewise. * math/test-signgam-uint-init-static.c: Likewise. * math/test-signgam-uint-init.c: Likewise. * math/test-signgam-uint-static.c: Likewise. * math/test-signgam-uint.c: Likewise. * math/test-signgam-ullong-init-static.c: Likewise. * math/test-signgam-ullong-init.c: Likewise. * math/test-signgam-ullong-static.c: Likewise. * math/test-signgam-ullong.c: Likewise. * math/w_lgamma.c: Rename to w_lgamma_main.c and replace by wrapper of w_lgamma_main.c. * math/w_lgamma_compat.c: New file. * math/w_lgamma_compatf.c: Likewise. * math/w_lgamma_compatl.c: Likewise. * math/w_lgamma_main.c: New file. Based on w_lgamma.c. Include <lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support defining compatibility symbols. (__lgamma): Change to LGFUNC (__lgamma). Use CALL_LGAMMA. * math/w_lgammaf.c: Rename to w_lgammaf_main.c and replace by wrapper of w_lgammaf_main.c. * math/w_lgammaf_main.c: New file. Based on w_lgammaf.c. Include <lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support defining compatibility symbols. (__lgammaf): Change to LGFUNC (__lgammaf). Use CALL_LGAMMA. * math/w_lgammal.c: Rename to w_lgammal_main.c and replace by wrapper of w_lgammal_main.c. * math/w_lgammal_main.c: New file. Based on w_lgammal.c. Include <lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support defining compatibility symbols. (__lgammal): Change to LGFUNC (__lgammal). Use CALL_LGAMMA. * sysdeps/ia64/fpu/lgamma-compat.h: New file. * sysdeps/ia64/fpu/w_lgamma.c: Move to .... * sysdeps/ia64/fpu/w_lgamma_main.c: ...here. Include <lgamma-compat.h>. (__ieee754_lgamma): Change to LGFUNC (lgamma). Use CALL_LGAMMA. (__ieee754_gamma): Define as alias. * sysdeps/ia64/fpu/w_lgammaf.c: Move to .... * sysdeps/ia64/fpu/w_lgammaf_main.c: ...here. Include <lgamma-compat.h>. (__ieee754_lgammaf): Change to LGFUNC (lgammaf). Use CALL_LGAMMA. (__ieee754_gammaf): Define as alias. * sysdeps/ia64/fpu/w_lgammal.c: Move to .... * sysdeps/ia64/fpu/w_lgammal_main.c: ...here. Include <lgamma-compat.h>. (__ieee754_lgammal): Change to LGFUNC (lgammal). Use CALL_LGAMMA. (__ieee754_gammal): Define as alias. * sysdeps/ieee754/ldbl-opt/w_lgamma.c: Move to .... * sysdeps/ieee754/ldbl-opt/w_lgamma_compat.c: ...here. Include <math/w_lgamma_compat.c>. [LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__lgammal_dbl_compat): Define as alias of __lgamma_compat and use in defining lgammal. * sysdeps/ieee754/ldbl-opt/w_lgammal.c: Move to .... * sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c: ...here. Include <math/lgamma-compat.h> and <math/w_lgamma_compatl.c>. (USE_AS_COMPAT): New macro. (LGAMMA_OLD_VER): Undefine and redefine. (lgammal): Do not define here. (gammal): Only define here if [GAMMA_ALIAS]. * conform/linknamespace.pl (@whitelist): Remove signgam. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
Florian Weimer
|
8c77b6ad40 |
Simplify the abilist format
The new format lists the version on each line, as in: VERSION SYMBOL TYPE [VALUE] This makes it easier to process the files with line-oriented tools. The abilist files were converted with this awk script: /^[^ ]/ { version = $1 } /^ / { print version, substr($0, 2) } And sorted under the "C" locale with sort. |
||
Mark Wielaard
|
8b7b7f75d9 |
Add LFS support for fts functions (bug 11460)
fts didn't have large-file support yet and fts.h had an #error preventing usage when _FILE_OFFSET_BITS was set. This required nasty workarounds for programs using fts with LFS. This patch implements LFS support for fts by adding FTS64 and FTENT64 variants plus fts64 functions. Which are simple aliases for 64bit off_t arches. Also includes a simple testcase for some of the fts functions with or without LFS enabled. [BZ #11460] * io/Makefile (routines): Add fts64. (tests): Add tst-fts and tst-fts-lfs. (CFLAGS-fts64.c): New. * io/Versions (GLIBC_2.23): New. * io/fts.c: Replace FTS with FTSOBJ, FTSENT with FTSENTRY. Use function defines FTS_OPEN, FTS_CLOSE, FTS_READ, FTS_SET and FTS_CHILDREN. Define FTSOBJ, FTSENTRY, FTS_OPEN, FTS_CLOSE, FTS_READ, FTS_SET, FTS_CHILDREN, INO_T, STAT and LSTAT if necessary. * io/fts.h (FTS64): New if _USE_LARGEFILE64. (FTSENT64): Likewise. (fts64_children): Likewise. (fts64_close): Likewise. (fts64_open): Likewise. (fts64_read): Likewise. (fts64_set): Likewise. * io/fts64.c: New file. * io/tst-fts.c: New test. * io/tst-fts-lfs.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist (GLIBC_2.23): Add GLIBC_2.23, fts64_children, fts64_close, fts64_open, fts64_read and fts64_set. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/wordsize-64/fts.c: New file. * sysdeps/wordsize-64/fts64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/fts.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/fts64.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/fts.c: likewise. * sysdeps/unix/sysv/linux/x86_64/x32/fts64.c: likewise. |
||
H.J. Lu
|
fb1cf10811 |
Add INLINE_SYSCALL_ERROR_RETURN_VALUE
For ia32 PIC, the first thing of many syscalls does is to call __x86.get_pc_thunk.reg to load PC into reg in case there is an error, which is required for setting errno. In most cases, there are no errors. But we still call __x86.get_pc_thunk.reg. This patch adds INLINE_SYSCALL_ERROR_RETURN_VALUE so that i386 can optimize setting errno by branching to the internal __syscall_error without PLT. With i386 INLINE_SYSCALL_ERROR_RETURN_VALUE and i386 syscall inlining optimization for GCC 5, for sysdeps/unix/sysv/linux/fchmodat.c with -O2 -march=i686 -mtune=generic, GCC 5.2 now generates: <fchmodat>: 0: push %ebx 1: mov 0x14(%esp),%eax 5: mov 0x8(%esp),%ebx 9: mov 0xc(%esp),%ecx d: mov 0x10(%esp),%edx 11: test $0xfffffeff,%eax 16: jne 38 <fchmodat+0x38> 18: test $0x1,%ah 1b: jne 48 <fchmodat+0x48> 1d: mov $0x132,%eax 22: call *%gs:0x10 29: cmp $0xfffff000,%eax 2e: ja 58 <fchmodat+0x58> 30: pop %ebx 31: ret 32: lea 0x0(%esi),%esi 38: pop %ebx 39: mov $0xffffffea,%eax 3e: jmp 3f <fchmodat+0x3f> 3f: R_386_PC32 __syscall_error 43: nop 44: lea 0x0(%esi,%eiz,1),%esi 48: pop %ebx 49: mov $0xffffffa1,%eax 4e: jmp 4f <fchmodat+0x4f> 4f: R_386_PC32 __syscall_error 53: nop 54: lea 0x0(%esi,%eiz,1),%esi 58: pop %ebx 59: jmp 5a <fchmodat+0x5a> 5a: R_386_PC32 __syscall_error instead of <fchmodat>: 0: sub $0x8,%esp 3: mov 0x18(%esp),%eax 7: mov %ebx,(%esp) a: call b <fchmodat+0xb> b: R_386_PC32 __x86.get_pc_thunk.bx f: add $0x2,%ebx 11: R_386_GOTPC _GLOBAL_OFFSET_TABLE_ 15: mov %edi,0x4(%esp) 19: test $0xfffffeff,%eax 1e: jne 70 <fchmodat+0x70> 20: test $0x1,%ah 23: jne 88 <fchmodat+0x88> 25: mov 0x14(%esp),%edx 29: mov 0x10(%esp),%ecx 2d: mov 0xc(%esp),%edi 31: xchg %ebx,%edi 33: mov $0x132,%eax 38: call *%gs:0x10 3f: xchg %edi,%ebx 41: cmp $0xfffff000,%eax 46: ja 58 <fchmodat+0x58> 48: mov (%esp),%ebx 4b: mov 0x4(%esp),%edi 4f: add $0x8,%esp 52: ret 53: nop 54: lea 0x0(%esi,%eiz,1),%esi 58: mov 0x0(%ebx),%edx 5a: R_386_TLS_GOTIE __libc_errno 5e: neg %eax 60: mov %eax,%gs:(%edx) 63: mov $0xffffffff,%eax 68: jmp 48 <fchmodat+0x48> 6a: lea 0x0(%esi),%esi 70: mov 0x0(%ebx),%eax 72: R_386_TLS_GOTIE __libc_errno 76: movl $0x16,%gs:(%eax) 7d: mov $0xffffffff,%eax 82: jmp 48 <fchmodat+0x48> 84: lea 0x0(%esi,%eiz,1),%esi 88: mov 0x0(%ebx),%eax 8a: R_386_TLS_GOTIE __libc_errno 8e: movl $0x5f,%gs:(%eax) 95: mov $0xffffffff,%eax 9a: jmp 48 <fchmodat+0x48> * sysdeps/unix/sysv/linux/sysdep.h: New file. * sysdeps/unix/sysv/linux/i386/sysdep.c: Likewise. * sysdeps/unix/sysv/linux/alpha/sysdep.h: Include <sysdeps/unix/sysv/linux/sysdep.h>. * sysdeps/unix/sysv/linux/arm/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/generic/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/hppa/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/sh/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) == csu] (sysdep-dl-routines): Add sysdep. [$(subdir) == nptl] (libpthread-routines): Likewise. [$(subdir) == rt] (librt-routines): Likewise. * sysdeps/unix/sysv/linux/i386/clone.S (__clone): Don't check PIC when branching to SYSCALL_ERROR_LABEL. * sysdeps/unix/sysv/linux/i386/sysdep.S: Removed. * sysdeps/unix/sysv/linux/i386/sysdep.h: Include <sysdeps/unix/sysv/linux/sysdep.h>. (SYSCALL_ERROR_LABEL): Changed to __syscall_error. (SYSCALL_ERROR_ERRNO): Removed. (SYSCALL_ERROR_HANDLER): Changed to empty. (SYSCALL_ERROR_HANDLER_TLS_STORE): Likewise. (__syscall_error): New prototype. [IS_IN (libc)] (INLINE_SYSCALL): New macro. (INLINE_SYSCALL_ERROR_RETURN_VALUE): Likewise. |
||
Adhemerval Zanella
|
0fcc93bce9 |
Mark lseek/llseek as non-cancellable
This patch sets lseek/llseek for 64-bit, MIPS n32, and x86_32 as non- cancelable. This make it consistant with 32-bit platform. Tested on i686, x86_64, and x32. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (lseek): Set as non-cancelable. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (llseek): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/lseek.S (__libc_lseek64): Likewise. |
||
Adhemerval Zanella
|
fdb7d390dd |
libio: fmemopen rewrite to POSIX compliance
This patch added a new fmemopen version, for glibc 2.22, that aims to be POSIX complaint. It fixes some long-stading glibc fmemopen issues, such as: * it changes the way fseek with SEEK_END works on fmemopen to seek relative to buffer size instead of first '\0'. This is default mode and 'b' opening mode does not change internal behavior (bz#6544). * fix apending opening mode to use as start position either first null byte of len specified in function call (bz#13152 and #13151). * remove binary option 'b' and internal different handling (bz#12836) * fix seek/SEE_END with negative values (bz#14292). A compatibility symbol is provided to with old behavior for older symbols version (2.2.5). * include/stdio.h (fmemopen): Remove hidden prototype. (__fmemopen): Add new hidden prototype. * libio/Makefile: Add oldfmemopen object. * libio/Versions [GLIBC_2.22]: Add new fmemopen symbol. * libio/fmemopen.c (__fmemopen): Function rewrite to be POSIX compliance. * libio/oldfmemopen.c: New file: old fmemopen implementation for symbol compatibility. * stdio-common/Makefile [tests]: Add new tst-fmemopen3. * stdio-common/psiginfo.c [psiginfo]: Call __fmemopen instead of fmemopen. * stdio-common/tst-fmemopen3.c: New file: more fmemopen tests, focus on append and read mode. * sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.22]: Add fmemopen. * sysdeps/unix/sysv/linux/alpha/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist [GLIBC_2.22]: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist [GLIBC_2.22]: Likewise. |
||
Adhemerval Zanella
|
c6bb095eb5 |
nptl: Rewrite cancellation macros
This patch changes the way cancellation entrypoints are defined to instead call the macro SYSCALL_CANCEL. An usual cnacellation definition is defined as: if (SINGLE_THREAD_P) return INLINE_SYSCALL (syscall, NARGS, args...) int oldtype = LIBC_CANCEL_ASYNC (); return INLINE_SYSCALL (syscall, NARGS, args...) LIBC_CANCEL_RESET (oldtype); And it is rewrited as just: SYSCALL_CANCEL (syscall, args...) The idea is to remove LIBC_CANCEL_ASYNC/LIBC_CANCEL_RESET explicit usage. Tested on i386, x86_64, powerpc32, powerpc64le, arm, and aarch64. * sysdeps/unix/sysdep.h [SYSCALL_CANCEL]: New macro: define cancellable syscalls. (SYS_ify): Add guard to no redefine it. (INLINE_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/accept4.c (accept4): Remove LIBC_CANCEL_ASYNC/INLINE_SYSCALL/LIBC_CANCEL_RESET and use SYSCALL_CANCEL instead. * sysdeps/unix/sysv/linux/alpha/fdatasync.c (__fdatasync): Likewise. * sysdeps/unix/sysv/linux/arm/pread.c (__libc_pread): Likewise. * sysdeps/unix/sysv/linux/arm/pread64.c (__libc_pread64): Likewise. * sysdeps/unix/sysv/linux/arm/pwrite.c (__libc_pwrite): Likewise. * sysdeps/unix/sysv/linux/arm/pwrite64.c (__libc_pwrite64): Likewise. * sysdeps/unix/sysv/linux/epoll_pwait.c (epoll_pwait): Likewise. * sysdeps/unix/sysv/linux/fallocate.c (fallocate): Likewise. * sysdeps/unix/sysv/linux/fallocate64.c (fallocate64): Likewise. * sysdeps/unix/sysv/linux/generic/open.c (__libc_open): Likewise. * sysdeps/unix/sysv/linux/generic/open64.c (__libc_open64): Likewise. * sysdeps/unix/sysv/linux/generic/pause.c (__libc_pause): Likewise. * sysdeps/unix/sysv/linux/generic/poll.c (__poll): Likewise. * sysdeps/unix/sysv/linux/generic/recv.c (__libc_recv): Likewise. * sysdeps/unix/sysv/linux/generic/select.c (__select): Likewise. * sysdeps/unix/sysv/linux/generic/send.c (__libc_send): Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/pread.c (__libc_pread): Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/pread64.c (__libc_pread64): Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/preadv.c (__libc_preadv): Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/preadv64.c (__libc_readv64): Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/pwrite.c (__libc_pwrite): Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/pwrite64.c (__libc_pwrite64): Likewise. * sysdeps/unix/sysv/linux/generic/wordsize-32/pwritev.c (__libc_pwritev): Likewise. * sysdeps/sysv/linux/generic/wordsize-32/pwritev64.c (__libc_pwritev64): Likewise. * sysdeps/unix/sysv/linux/i386/fcntl.c (__libc_fcntl): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/sync_file_range.c (sync_file_range): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/fallocate.c (fallocate): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/fallocate64.c (fallocate64): Likewise. * sysdeps/unix/sysv/linux/mips/pread.c (__libc_pread): Likewise. * sysdeps/unix/sysv/linux/mips/pread64.c (__libc_pread64): Likewise. * sysdeps/unix/sysv/linux/mips/pwrite.c (__libc_pwrite): Likewise. * sysdeps/unix/sysv/linux/mips/pwrite64.c (__libc_pwrite64): Likewise. * sysdeps/unix/sysv/linux/msgrcv.c (__libc_msgrcv): Likewise. * sysdeps/unix/sysv/linux/msgsnd.c (__libc_msgsnd): Likewise. * sysdeps/unix/sysv/linux/open64.c (__libc_open64): Likewise. * sysdeps/unix/sysv/linux/openat.c (__libc_openat): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/pread.c (__libc_pread): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/pread64.c (__libc_read64): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/pwrite.c (__libc_write): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/pwrite64.c (__libc_write64): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/fcntl.c (__libc_fcntl): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/pread.c (__libc_pread): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/pread64.c (__libc_pread64): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite.c (__libc_pwrite): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite64.c (__libc_pwrite64): Likewise. * sysdeps/sysv/linux/powerpc/powerpc64/sync_file_range.c (sync_file_range): Likewise. * sysdeps/unix/sysv/linux/ppoll.c (ppoll): Likewise. * sysdeps/unix/sysv/linux/pread.c (__libc_pread): Likewise. * sysdeps/unix/sysv/linux/pread64.c (__libc_pread64): Likewise. * sysdeps/unix/sysv/linux/preadv.c (__libc_preadv): Likewise. * sysdeps/unix/sysv/linux/pselect.c (__pselect): Likewise. * sysdeps/unix/sysv/linux/pwrite.c (__libc_pwrite): Likewise. * sysdeps/unix/sysv/linux/pwrite64.c (__libc_pwrite64): Likewise. * sysdeps/unix/sysv/linux/pwritev.c (PWRITEV): Likewise. * sysdeps/unix/sysv/linux/readv.c (__libc_readv): Likewise. * sysdeps/unix/sysv/linux/recvmmsg.c (recvmmsg): Likewise. * sysdeps/unix/sysv/linux/sendmmsg.c (sendmmsg): Likewise. * sysdeps/unix/sysv/linux/sh/pread.c (__libc_pread): Likewise. * sysdeps/unix/sysv/linux/sh/pread64.c (__libc_pread64): Likewise. * sysdeps/unix/sysv/linux/sh/pwrite.c (__libc_pwrite): Likewise. * sysdeps/unix/sysv/linux/sh/pwrite64.c (__libc_pwrite64): Likewise. * sysdeps/unix/sysv/linux/sigsuspend.c (__sigsuspend): Likewise. * sysdeps/unix/sysv/linux/sigtimedwait.c (__sigtimedwait): Likewise. * sysdeps/unix/sysv/linux/sigwaitinfo.c (__sigwaitinfo): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/msgrcv.c (__libc_msgrcv): Likewise. * sysdeps/unix/sysv/linux/sync_file_range.c (sync_file_range): Likewise. * sysdeps/unix/sysv/linux/tcdrain.c (__libc_tcdrain): Likewise. * sysdeps/unix/sysv/linux/timer_routines.c (timer_helper_thread): Likewise. * sysdeps/unix/sysv/linux/wait.c (__libc_wait): Likewise. * sysdeps/unix/sysv/linux/waitid.c (__waitid): Likewise. * sysdeps/unix/sysv/linux/waitpid.c (__libc_waitpid): Likewise. * sysdeps/unix/sysv/linux/wordsize-64/fallocate.c (fallocate): Likewise. * sysdeps/unix/sysv/linux/wordsize-64/preadv.c (preadv): Likewise. * sysdeps/unix/sysv/linux/wordsize-64/pwritev.c (pwritev): Likewise. * sysdeps/unix/sysv/linux/writev.c (__libc_writev): Likewise. * sysdeps/unix/sysv/linux/x86_64/recv.c (__libc_recv): Likewise. * sysdeps/unix/sysv/linux/x86_64/send.c (__libc_send): Likewise. |
||
Joseph Myers
|
e0c349b40c |
Use better variable names in MIPS syscall macros.
Carlos noted in <https://sourceware.org/ml/libc-alpha/2015-05/msg00680.html> that various ports use potentially problematic short variables names in their syscall macros, which could shadow variables with the same name from containing scopes. This patch fixes variables called err and ret in MIPS macros. (I left result_var and _sys_result - separate variables in different macros, which need separate names - alone.) Tested for mips64 (all three ABIs) that installed stripped shared libraries are unchanged by this patch. * sysdeps/unix/sysv/linux/mips/mips32/sysdep.h (INLINE_SYSCALL): Use variable name _sc_err instead of err. [__mips16] (INTERNAL_SYSCALL_NCS): Use variable name _sc_ret instead of ret. * sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h (INLINE_SYSCALL): Use variable name _sc_err instead of err. * sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h (INLINE_SYSCALL): Likewise. |
||
Florian Weimer
|
d0ccd0d977 |
__ASSUME_FALLOCATE is always true on 32-bit architectures
This means we can clean up the generic code a bit. The 64-bit variant still needs to support !__ASSUME_FALLOCATE for alpha. |
||
Joseph Myers
|
ac4c11f580 |
Fix MIPS n64 posix_fadvise namespace (bug 17796).
sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise.c defines posix_fadvise64 as a strong alias for posix_fadvise (for !SHLIB_COMPAT(libc, GLIBC_2_2, GLIBC_2_3_3) - i.e., for static linking, which is the case when this matters), but it should be a weak alias. This patch makes it a weak alias. Tested for MIPS that this fixes the observed linknamespace test failures. [BZ #17796] * sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise.c [!SHLIB_COMPAT(libc, GLIBC_2_2, GLIBC_2_3_3)] (posix_fadvise64): Define as weak alias not strong alias. |
||
Joseph Myers
|
b168057aaa | Update copyright dates with scripts/update-copyrights. | ||
Joseph Myers
|
2b89bce91e |
Fix MIPS sigaction build.
Building MIPS sigaction (for ABIs other than o32) fails because of "'restore_rt' used but never defined", arising from static functions being defined in asms and referred to from C code. There is no corresponding -W option for that warning, so this patch uses -Wno-error for building sigaction.c. * sysdeps/unix/sysv/linux/mips/mips64/Makefile [$(subdir) == signal] (CFLAGS-sigaction.c): New variable. [$(subdir) == nptl] (CFLAGS-sigaction.c): Likewise. |
||
Siddhesh Poyarekar
|
4f41c682f3 |
Remove NOT_IN_libc
Replace with !IS_IN (libc). This completes the transition from the IS_IN/NOT_IN macros to the IN_MODULE macro set. The generated code is unchanged on x86_64. * stdlib/isomac.c (fmt): Replace NOT_IN_libc with IN_MODULE. (get_null_defines): Adjust. * sunrpc/Makefile: Adjust comment. * Makerules (CPPFLAGS-nonlib): Remove NOT_IN_libc. * elf/Makefile (CPPFLAGS-sotruss-lib): Likewise. (CFLAGS-interp.c): Likewise. (CFLAGS-ldconfig.c): Likewise. (CPPFLAGS-.os): Likewise. * elf/rtld-Rules (rtld-CPPFLAGS): Likewise. * extra-lib.mk (CPPFLAGS-$(lib)): Likewise. * extra-modules.mk (extra-modules.mk): Likewise. * iconv/Makefile (CPPFLAGS-iconvprogs): Likewise. * locale/Makefile (CPPFLAGS-locale_programs): Likewise. * malloc/Makefile (CPPFLAGS-memusagestat): Likewise. * nscd/Makefile (CPPFLAGS-nscd): Likewise. * nss/Makefile (CPPFLAGS-nss_test1): Likewise. * stdlib/Makefile (CFLAGS-tst-putenvmod.c): Likewise. * sysdeps/gnu/Makefile ($(objpfx)errlist-compat.c): Likewise. * sysdeps/unix/sysv/linux/Makefile (CPPFLAGS-lddlibc4): Likewise. * iconvdata/Makefile (CPPFLAGS): Likewise. (cpp-srcs-left): Add libof for all iconvdata routines. * bits/stdio-lock.h: Replace NOT_IN_libc with IS_IN. * include/assert.h: Likewise. * include/ctype.h: Likewise. * include/errno.h: Likewise. * include/libc-symbols.h: Likewise. * include/math.h: Likewise. * include/netdb.h: Likewise. * include/resolv.h: Likewise. * include/stdio.h: Likewise. * include/stdlib.h: Likewise. * include/string.h: Likewise. * include/sys/stat.h: Likewise. * include/wctype.h: Likewise. * intl/l10nflist.c: Likewise. * libidn/idn-stub.c: Likewise. * libio/libioP.h: Likewise. * nptl/libc_multiple_threads.c: Likewise. * nptl/pthreadP.h: Likewise. * posix/regex_internal.h: Likewise. * resolv/res_hconf.c: Likewise. * sysdeps/arm/armv7/multiarch/memcpy.S: Likewise. * sysdeps/arm/memmove.S: Likewise. * sysdeps/arm/sysdep.h: Likewise. * sysdeps/generic/_itoa.h: Likewise. * sysdeps/generic/symbol-hacks.h: Likewise. * sysdeps/gnu/errlist.awk: Likewise. * sysdeps/gnu/errlist.c: Likewise. * sysdeps/i386/i586/memcpy.S: Likewise. * sysdeps/i386/i586/memset.S: Likewise. * sysdeps/i386/i686/memcpy.S: Likewise. * sysdeps/i386/i686/memmove.S: Likewise. * sysdeps/i386/i686/mempcpy.S: Likewise. * sysdeps/i386/i686/memset.S: Likewise. * sysdeps/i386/i686/multiarch/bcopy.S: Likewise. * sysdeps/i386/i686/multiarch/bzero.S: Likewise. * sysdeps/i386/i686/multiarch/memchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/memchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/memchr.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp-sse4.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3-rep.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy_chk.S: Likewise. * sysdeps/i386/i686/multiarch/memmove.S: Likewise. * sysdeps/i386/i686/multiarch/memmove_chk.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy_chk.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr-c.c: Likewise. * sysdeps/i386/i686/multiarch/memrchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr.S: Likewise. * sysdeps/i386/i686/multiarch/memset-sse2-rep.S: Likewise. * sysdeps/i386/i686/multiarch/memset-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/memset.S: Likewise. * sysdeps/i386/i686/multiarch/memset_chk.S: Likewise. * sysdeps/i386/i686/multiarch/rawmemchr.S: Likewise. * sysdeps/i386/i686/multiarch/strcat-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strcat-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/strcat.S: Likewise. * sysdeps/i386/i686/multiarch/strchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/strchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strchr.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp-sse4.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy.S: Likewise. * sysdeps/i386/i686/multiarch/strcspn.S: Likewise. * sysdeps/i386/i686/multiarch/strlen-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/strlen-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strlen.S: Likewise. * sysdeps/i386/i686/multiarch/strnlen.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr.S: Likewise. * sysdeps/i386/i686/multiarch/strspn.S: Likewise. * sysdeps/i386/i686/multiarch/wcschr-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcschr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcschr.S: Likewise. * sysdeps/i386/i686/multiarch/wcscmp-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcscmp.S: Likewise. * sysdeps/i386/i686/multiarch/wcscpy-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcscpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/wcscpy.S: Likewise. * sysdeps/i386/i686/multiarch/wcslen-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcslen-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcslen.S: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr.S: Likewise. * sysdeps/i386/i686/multiarch/wmemcmp-c.c: Likewise. * sysdeps/i386/i686/multiarch/wmemcmp.S: Likewise. * sysdeps/ia64/fpu/libm-symbols.h: Likewise. * sysdeps/nptl/bits/libc-lock.h: Likewise. * sysdeps/nptl/bits/libc-lockP.h: Likewise. * sysdeps/nptl/bits/stdio-lock.h: Likewise. * sysdeps/posix/closedir.c: Likewise. * sysdeps/posix/opendir.c: Likewise. * sysdeps/posix/readdir.c: Likewise. * sysdeps/posix/rewinddir.c: Likewise. * sysdeps/powerpc/novmx-sigjmp.c: Likewise. * sysdeps/powerpc/powerpc32/__longjmp.S: Likewise. * sysdeps/powerpc/powerpc32/bsd-_setjmp.S: Likewise. * sysdeps/powerpc/powerpc32/fpu/__longjmp.S: Likewise. * sysdeps/powerpc/powerpc32/fpu/setjmp.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/bzero.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcmp-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcpy-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memmove.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memrchr-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memrchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memset-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memset.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/rawmemchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strcasecmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strcasecmp_l.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strchrnul.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strlen-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strlen.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncase.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncase_l.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncmp-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strnlen.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcschr-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcschr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wordcopy.c: Likewise. * sysdeps/powerpc/powerpc32/power6/memset.S: Likewise. * sysdeps/powerpc/powerpc32/setjmp.S: Likewise. * sysdeps/powerpc/powerpc64/__longjmp.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/bzero.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcmp-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memmove-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memmove.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/mempcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/rawmemchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpncpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcasecmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcasecmp_l.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcat.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchrnul.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcspn.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strlen-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strlen.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncase.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncase_l.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncat.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strnlen.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strpbrk.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strrchr-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strspn-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strspn.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcschr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcscpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcsrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wordcopy.c: Likewise. * sysdeps/powerpc/powerpc64/setjmp.S: Likewise. * sysdeps/s390/s390-32/multiarch/ifunc-resolve.c: Likewise. * sysdeps/s390/s390-32/multiarch/memcmp.S: Likewise. * sysdeps/s390/s390-32/multiarch/memcpy.S: Likewise. * sysdeps/s390/s390-32/multiarch/memset.S: Likewise. * sysdeps/s390/s390-64/multiarch/ifunc-resolve.c: Likewise. * sysdeps/s390/s390-64/multiarch/memcmp.S: Likewise. * sysdeps/s390/s390-64/multiarch/memcpy.S: Likewise. * sysdeps/s390/s390-64/multiarch/memset.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-niagara1.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-niagara2.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-niagara4.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memset-niagara1.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memset-niagara4.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memset.S: Likewise. * sysdeps/unix/alpha/sysdep.S: Likewise. * sysdeps/unix/alpha/sysdep.h: Likewise. * sysdeps/unix/make-syscalls.sh: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. * sysdeps/unix/sysv/linux/arm/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/arm/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/getpid.c: Likewise. * sysdeps/unix/sysv/linux/hppa/nptl/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/hppa/nptl/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/i386/i486/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/i386/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/i386/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/i386/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/ia64/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep.S: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/lowlevellock-futex.h: Likewise. * sysdeps/unix/sysv/linux/m68k/bits/m68k-vdso.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/not-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/longjmp_chk.c: Likewise. * sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sh/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/sh/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/sh/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sh/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/brk.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/tile/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/tile/waitpid.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep.h: Likewise. * sysdeps/wordsize-32/symbol-hacks.h: Likewise. * sysdeps/x86_64/memcpy.S: Likewise. * sysdeps/x86_64/memmove.c: Likewise. * sysdeps/x86_64/memset.S: Likewise. * sysdeps/x86_64/multiarch/init-arch.h: Likewise. * sysdeps/x86_64/multiarch/memcmp-sse4.S: Likewise. * sysdeps/x86_64/multiarch/memcmp-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/memcmp.S: Likewise. * sysdeps/x86_64/multiarch/memcpy-avx-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/memcpy-ssse3-back.S: Likewise. * sysdeps/x86_64/multiarch/memcpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/memcpy.S: Likewise. * sysdeps/x86_64/multiarch/memcpy_chk.S: Likewise. * sysdeps/x86_64/multiarch/memmove.c: Likewise. * sysdeps/x86_64/multiarch/mempcpy.S: Likewise. * sysdeps/x86_64/multiarch/mempcpy_chk.S: Likewise. * sysdeps/x86_64/multiarch/memset-avx2.S: Likewise. * sysdeps/x86_64/multiarch/memset.S: Likewise. * sysdeps/x86_64/multiarch/memset_chk.S: Likewise. * sysdeps/x86_64/multiarch/strcat-sse2-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/strcat-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/strcat.S: Likewise. * sysdeps/x86_64/multiarch/strchr-sse2-no-bsf.S: Likewise. * sysdeps/x86_64/multiarch/strchr.S: Likewise. * sysdeps/x86_64/multiarch/strcmp-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/strcmp.S: Likewise. * sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/strcpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/strcpy.S: Likewise. * sysdeps/x86_64/multiarch/strcspn.S: Likewise. * sysdeps/x86_64/multiarch/strspn.S: Likewise. * sysdeps/x86_64/multiarch/wcscpy-c.c: Likewise. * sysdeps/x86_64/multiarch/wcscpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/wcscpy.S: Likewise. * sysdeps/x86_64/multiarch/wmemcmp-c.c: Likewise. * sysdeps/x86_64/multiarch/wmemcmp.S: Likewise. * sysdeps/x86_64/strcmp.S: Likewise. |
||
Siddhesh Poyarekar
|
ce9f10f7f0 |
Remove IS_IN_libpthread
Replace with IS_IN (libpthread). Generated code unchanged on x86_64. * nptl/lowlevellock.c: Use IS_IN instead of IS_IN_libpthread. * nptl/pthreadP.h: Likewise. * nptl_db/structs.def: Likewise. * sysdeps/arm/sysdep.h: Likewise. * sysdeps/nptl/bits/libc-lock.h: Likewise. * sysdeps/nptl/bits/libc-lockP.h: Likewise. * sysdeps/sparc/sparc32/lowlevellock.c: Likewise. * sysdeps/unix/alpha/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/arm/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/hppa/nptl/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/i386/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/i386/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/not-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sh/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/tile/waitpid.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/cancellation.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h: Likewise. |
||
Siddhesh Poyarekar
|
016afc75cd |
Remove IS_IN_librt
Replace with IS_IN (librt). Generated code unchanged on x86_64 * include/mqueue.h: Use IS_IN instead of IS_IN_librt. * nptl/pthreadP.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/arm/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/hppa/nptl/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/i386/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/not-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sh/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/tile/waitpid.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h: Likewise. |
||
Roland McGrath
|
37caf178e2 | MIPS: Consolidate nptl/ subdirectories under linux/... | ||
Joseph Myers
|
b351d85aa2 |
Fix MIPS64 *_nocancel gp setup.
The 64-bit MIPS ABIs involve the caller setting up t9 ($25) to the address of the called function, and the called function then using this in a .cpsetup directive to compute gp. The .cpsetup directive needs to name the function to which t9 points for this purpose. In the definition of *_nocancel functions, the directive pointed to the normal entry point rather than the _nocancel one, resulting in segfaults when the _nocancel functions were used. This patch corrects the function name used in the directive. (It seems the bug was latent until Roland's not-cancel.h unification, with the _nocancel entry points not previously being used - so not user-visible in a release, so no Bugzilla entry required.) Tested mips64 sufficiently to confirm the previously seen segfaults are fixed. * sysdeps/unix/sysv/linux/mips/mips64/nptl/sysdep-cancel.h [__PIC__] (PSEUDO): Use name of _nocancel entry point in corresponding .cpsetup call. |
||
Joseph Myers
|
809fdf0d23 |
Remove __ASSUME_ATFCTS conditionals in sysdeps/unix/sysv/linux/.
This patch cleans up for __ASSUME_ATFCTS now always being true for the supported Linux kernel versions by removing conditional code in sysdeps/unix/sysv/linux. Several fchownat.c files that were only present because of differences in the fallback syscalls used (depending on the architecture-specific names of chown-related syscalls for 32-bit uids) are removed. Files that looks like they could be replaced by syscalls.list entries have the standard "Consider moving to syscalls.list." comment (see bug 14138) added. Conditionals on the relevant __NR_* syscall numbers being defined are also removed, since my analysis indicated that the relevant syscalls are always defined for all relevant kernel versions using any affected file. Much of the removed fallback code had unbounded stack allocations, so this reduces the number of cases to consider for anyone reviewing uses of alloca and VLAs in glibc. There remain tests of __ASSUME_ATFCTS in io/openat.c (to determine whether to define __have_atfcts) and sysdeps/posix/getcwd.c (which also uses __have_atfcts); thus, the definition of __ASSUME_ATFCTS remains in kernel-features.h. The logical condition relevant there is whether openat64_not_cancel_3 is known to work. Hurd doesn't use this version of getcwd at all, so the conditionals in getcwd.c are always true in glibc. However, this code is also used in gnulib. So the best way to deal with the conditionals there may be for gnulib people to deal with merging all relevant changes in both directions between the glibc and gnulib versions of this file, at the end of which the openat conditionals should be in whatever form is best for gnulib, and hardcoded in the _LIBC case to having openat supported. Tested by comparing before-and-after disassembly of installed (stripped) shared libraries, on x86_64 and x86. On x86 the patch made no change to the disassembly; on x86_64, the only changes were in readlinkat, where formerly the return value from the readlinkat syscall was stored in an int variable before being converted to ssize_t for the return, and now the return value is returned directly without truncation to int. I think it's clearly correct not to truncate the return value (although I also think the truncation would not have been a user-visible bug because the kernel would never have returned a value it could have affected). * include/fcntl.h (__atfct_seterrno): Remove prototype. (__atfct_seterrno_2): Likewise. * sysdeps/unix/sysv/linux/alpha/dl-fxstatat64.c: Do not include <kernel-features.h>. (__ASSUME_ATFCTS): Do not undefine and redefine. * sysdeps/unix/sysv/linux/alpha/fxstatat.c [__ASSUME_ATFCTS] (__have_atfcts): Remove conditional definition. (__fxstatat([__NR_fstatat64]: Make code unconditional. (__fxstatat) [!__ASSUME_ATFCTS]: Remove conditional code and code unreachable if [__ASSUME_ATFCTS]. * sysdeps/unix/sysv/linux/dl-fxstatat64.c (__ASSUME_ATFCTS): Do not undefine and redefine. * sysdeps/unix/sysv/linux/faccessat.c: Do not include <kernel-features.h>. (faccessat) [__NR_faccessat]: Make code unconditional. (faccessat) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/fchmodat.c: Do not include <kernel-features.h>. (fchmodat) [__NR_fchmodat]: Make code unconditional. (fchmodat) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/fchownat.c: Do not include <kernel-features.h>. (fchownat) [__NR_fchownat]: Make code unconditional. (fchownat) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/futimesat.c: Do not include <kernel-features.h>. (futimesat) [__NR_futimesat]: Make code unconditional. (futimesat) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/fxstatat.c: Do not include <kernel-features.h>. (__fxstatat) [__NR_newfstatat]: Make code unconditional. (__fxstatat) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/fxstatat64.c: Do not include <kernel-features.h>. (__fxstatat64) [__NR_fstatat64]: Make code unconditional. (__fxstatat64) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/i386/fchownat.c: Remove file. * sysdeps/unix/sysv/linux/i386/fxstatat.c: Do not include <kernel-features.h>. (__fxstatat) [__NR_fstatat64]: Make code unconditional. (__fxstatat) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/linkat.c: Do not include <kernel-features.h>. (linkat) [__NR_linkat]: Make code unconditional. (linkat) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/m68k/fchownat.c: Remove file. * sysdeps/unix/sysv/linux/mips/mips64/fxstatat64.c: Do not include <kernel-features.h>. (__fxstatat64) [__NR_newfstatat]: Make code unconditional. (__fxstatat64) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/mkdirat.c: Do not include <kernel-features.h>. (mkdirat) [__NR_mkdirat]: Make code unconditional. (mkdirat) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/openat.c: Do not include <kernel-features.h>. [!__ASSUME_ATFCTS] (__atfct_seterrno): Remove function. [!__ASSUME_ATFCTS] (__have_atfcts): Remove variable. (OPENAT_NOT_CANCEL) [__NR_openat]: Make code unconditional. (OPENAT_NOT_CANCEL) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/powerpc/fchownat.c: Remove file. * sysdeps/unix/sysv/linux/readlinkat.c: Do not include <kernel-features.h>. (readlinkat) [__NR_readlinkat]: Make code unconditional. (readlinkat) [!__ASSUME_ATFCTS]: Remove conditional code. Return result of INLINE_SYSCALL directly, not via int variable. * sysdeps/unix/sysv/linux/renameat.c: Do not include <kernel-features.h>. [!__ASSUME_ATFCTS] (__atfct_seterrno_2): Remove function. (renameat) [__NR_renameat]: Make code unconditional. (renameat) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/s390/s390-32/fchownat.c: Remove file. * sysdeps/unix/sysv/linux/sh/fchownat.c: Remove file. * sysdeps/unix/sysv/linux/sparc/sparc32/fchownat.c: Remove file. * sysdeps/unix/sysv/linux/sparc/sparc64/dl-fxstatat64.c (__ASSUME_ATFCTS): Do not undefine and redefine. * sysdeps/unix/sysv/linux/symlinkat.c: Do not include <kernel-features.h>. (symlinkat) [__NR_symlinkat]: Make code unconditional. (symlinkat) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/unlinkat.c: Do not include <kernel-features.h>. (unlinkat) [__NR_unlinkat]: Make code unconditional. (unlinkat) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/wordsize-64/dl-fxstatat64.c (__ASSUME_ATFCTS): Do not undefine and redefine. * sysdeps/unix/sysv/linux/wordsize-64/fxstatat.c: Do not include <kernel-features.h>. (__fxstatat) [__NR_newfstatat]: Make code unconditional. (__fxstatat) [!__ASSUME_ATFCTS]: Remove conditional code. * sysdeps/unix/sysv/linux/xmknodat.c: Do not include <kernel-features.h>. (__xmknodat) [__NR_mknodat]: Make code unconditional. (__xmknodat) [!__ASSUME_ATFCTS]: Remove conditional code. |
||
Joseph Myers
|
2ad7600be7 |
Move mips from ports to libc.
I've moved the MIPS port from ports to the main sysdeps hierarchy. Beyond the README update, the move of the files was simply git mv ports/sysdeps/mips sysdeps/mips git mv ports/sysdeps/unix/mips sysdeps/unix/mips git mv ports/sysdeps/unix/sysv/linux/mips sysdeps/unix/sysv/linux/mips and in addition to the ChangeLog entries here, I put a note at the top of ports/ChangeLog.mips similar to those in other files. Tested that disassembly of installed shared libraries for mips is the same before and after this patch (except for ld.so where paths in assertions are involved, as for arm). * sysdeps/mips: Move directory from ports/sysdeps/mips. * sysdeps/unix/mips: Move directory from ports/sysdeps/unix/mips. * sysdeps/unix/sysv/linux/mips: Move directory from ports/sysdeps/unix/sysv/linux/mips. * README: Update listing for mips-*-linux-gnu and mips64-*-linux-gnu. * sysdeps/mips: Move directory to ../sysdeps/mips. * sysdeps/unix/mips: Move directory to ../sysdeps/unix/mips. * sysdeps/unix/sysv/linux/mips: Move directory to ../sysdeps/unix/sysv/linux/mips. |
||
Roland McGrath
|
0d5cb2c74f |
[BZ #2329]
2006-02-20 Roland McGrath <roland@redhat.com> * sysdeps/mips: Directory removed, saved in ports repository. * sysdeps/unix/mips: Likewise. * sysdeps/unix/sysv/linux/mips: Likewise. * sysdeps/mach/mips: Likewise. * sysdeps/mach/hurd/mips: Likewise. * shlib-versions: Remove mips matches, now in ports fragment. * sysdeps/unix/sysv/linux/kernel-features.h: Likewise. * configure.in (machine): Likewise. * configure: Regenerated. 2006-02-15 Thomas Schwinge <tschwinge@gnu.org> [BZ #2329] * include/unistd.h (__getresuid, __getresgid, __setresuid) (__setresgid): Fix argument name order in prototypes. * posix/unistd.h (getresuid, getresgid, setresuid, setresgid): Likewise. * posix/getresuid.c (__getresuid): Fix argument order in definition. * posix/getresgid.c (__getresgid): Likewise. * posix/setresuid.c (__setresuid): Likewise. * posix/setresgid.c (__setresgid): Likewise. * sysdeps/mach/hurd/getresuid.c (__getresuid): Likewise. * sysdeps/mach/hurd/getresgid.c (__getresgid): Likewise. * sysdeps/mach/hurd/setresuid.c (__setresuid): Likewise. * sysdeps/mach/hurd/setresgid.c (__setresgid): Likewise. Reported by Samuel Thibault <samuel.thibault@ens-lyon.org>. |
||
Roland McGrath
|
9de06f3c77 |
* po/.cvsignore: List libc.pot.files, and not any .pot names.
* manual/maint.texi (Porting): Don't mention Dist files. * sysdeps/alpha/soft-fp/Dist: File removed. * sysdeps/alpha/Dist: File removed. * sysdeps/i386/i686/Dist: File removed. * sysdeps/i386/soft-fp/Dist: File removed. * sysdeps/i386/Dist: File removed. * sysdeps/mips/soft-fp/Dist: File removed. * sysdeps/mips/mips64/soft-fp/Dist: File removed. * sysdeps/mips/mips64/Dist: File removed. * sysdeps/mips/Dist: File removed. * sysdeps/wordsize-32/Dist: File removed. * sysdeps/m68k/fpu/switch/Dist: File removed. * sysdeps/m68k/fpu/Dist: File removed. * sysdeps/powerpc/powerpc64/Dist: File removed. * sysdeps/powerpc/soft-fp/Dist: File removed. * sysdeps/powerpc/powerpc32/fpu/Dist: File removed. * sysdeps/powerpc/powerpc32/Dist: File removed. * sysdeps/powerpc/fpu/Dist: File removed. * sysdeps/powerpc/Dist: File removed. * sysdeps/unix/common/Dist: File removed. * sysdeps/unix/bsd/bsd4.4/Dist: File removed. * sysdeps/unix/bsd/Dist: File removed. * sysdeps/unix/sysv/linux/alpha/Dist: File removed. * sysdeps/unix/sysv/linux/i386/Dist: File removed. * sysdeps/unix/sysv/linux/mips/mips64/Dist: File removed. * sysdeps/unix/sysv/linux/mips/Dist: File removed. * sysdeps/unix/sysv/linux/m68k/Dist: File removed. * sysdeps/unix/sysv/linux/powerpc/powerpc64/Dist: File removed. * sysdeps/unix/sysv/linux/powerpc/powerpc32/Dist: File removed. * sysdeps/unix/sysv/linux/powerpc/aix/Dist: File removed. * sysdeps/unix/sysv/linux/powerpc/Dist: File removed. * sysdeps/unix/sysv/linux/sparc/sparc32/Dist: File removed. * sysdeps/unix/sysv/linux/sparc/sparc64/Dist: File removed. * sysdeps/unix/sysv/linux/sparc/Dist: File removed. * sysdeps/unix/sysv/linux/ia64/Dist: File removed. * sysdeps/unix/sysv/linux/s390/s390-64/Dist: File removed. * sysdeps/unix/sysv/linux/s390/Dist: File removed. * sysdeps/unix/sysv/linux/s390/s390-32/Dist: File removed. * sysdeps/unix/sysv/linux/sh/Dist: File removed. * sysdeps/unix/sysv/linux/x86_64/Dist: File removed. * sysdeps/unix/sysv/linux/hppa/Dist: File removed. * sysdeps/unix/sysv/linux/Dist: File removed. * sysdeps/unix/sysv/Dist: File removed. * sysdeps/unix/Dist: File removed. * sysdeps/generic/Dist: File removed. * sysdeps/sparc/sparc32/soft-fp/Dist: File removed. * sysdeps/sparc/sparc32/sparcv9/Dist: File removed. * sysdeps/sparc/sparc32/sparcv8/Dist: File removed. * sysdeps/sparc/sparc32/Dist: File removed. * sysdeps/sparc/sparc64/soft-fp/Dist: File removed. * sysdeps/sparc/sparc64/Dist: File removed. * sysdeps/sparc/Dist: File removed. * sysdeps/gnu/Dist: File removed. * sysdeps/ia64/fpu/Dist: File removed. * sysdeps/ia64/Dist: File removed. * sysdeps/mach/mips/Dist: File removed. * sysdeps/mach/hurd/alpha/Dist: File removed. * sysdeps/mach/hurd/i386/Dist: File removed. * sysdeps/mach/hurd/mips/Dist: File removed. * sysdeps/mach/hurd/powerpc/Dist: File removed. * sysdeps/mach/hurd/Dist: File removed. * sysdeps/s390/s390-64/Dist: File removed. * sysdeps/s390/Dist: File removed. * sysdeps/s390/s390-32/Dist: File removed. * sysdeps/sh/Dist: File removed. * sysdeps/posix/Dist: File removed. * sysdeps/ieee754/dbl-64/Dist: File removed. * sysdeps/ieee754/ldbl-128/Dist: File removed. * sysdeps/ieee754/flt-32/Dist: File removed. * sysdeps/ieee754/Dist: File removed. * sysdeps/x86_64/soft-fp/Dist: File removed. * sysdeps/x86_64/Dist: File removed. * sysdeps/hppa/Dist: File removed. * Makerules (common-clean): Don't remove distinfo file. ($(objpfx)distinfo): Target removed. * manual/Makefile (mostlyclean): Don't remove distinfo file. (glibc-targets): Remove echo-distinfo. * scripts/list-sources.sh: New file. * Makefile (TAGS): New target. * po/Makefile (libc.pot, libc.pot.files): New targets. * Makeconfig (XGETTEXT): New variable. * Makerules ($(..)po/%.pot): Rule removed. (TAGS): Target removed. * Rules (subdir_TAGS): Target removed. * MakeTAGS: File removed. * Makefile (iconvdata/% localedata/% po/% manual/%): Depend on FORCE. * Makeconfig ($(all-Depend-files)): New targets with no-op commands. |
||
Andreas Jaeger
|
2c923c369e |
[BZ #933]
2005-09-16 Maciej W. Rozycki <macro@linux-mips.org> [BZ #933] * sysdeps/unix/sysv/linux/mips/brk.c (__brk): Load the number of the syscall immediately before invocation. * sysdeps/unix/sysv/linux/mips/mips64/n64/ioctl.S (__ioctl): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/syscall.S (syscall): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/ioctl.S (__ioctl): Use macros to handle GP. * sysdeps/unix/sysv/linux/mips/mips64/syscall.S (syscall): Likewise. Update inaccurate comments. 2005-09-16 Maciej W. Rozycki <macro@linux-mips.org> [BZ #933] * sysdeps/unix/sysv/linux/mips/brk.c (__brk): Load the number of the syscall immediately before invocation. * sysdeps/unix/sysv/linux/mips/mips64/n64/ioctl.S (__ioctl): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/syscall.S (syscall): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/ioctl.S (__ioctl): Use macros to handle GP. * sysdeps/unix/sysv/linux/mips/mips64/syscall.S (syscall): Likewise. Update inaccurate comments. |
||
Andreas Jaeger
|
6740397ba7 |
[BZ #758]
2004-11-11 Richard Sandiford <rsandifo@redhat.com> [BZ #758] * sysdeps/unix/sysv/linux/mips/configure.in (asm-unistd.h): Only preprocess <asm/unistd.h> if it defines ABI-prefixed syscall names like __NR_N32_open. Just include <asm/unistd.h> otherwise. * sysdeps/unix/sysv/linux/mips/configure: Regenerate. * sysdeps/unix/sysv/linux/mips/mips32/kern64/sysdep.h: Delete * sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h (SYS_ify): Use the standard __NR prefix. * sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h (SYS_ify): Likewise. * sysdeps/unix/sysv/linux/mips/Makefile (syscall-%.h): Rework so that the output file is compatible with both pre-2.6 and 2.6 kernel headers. Extract separate syscall lists for each ABI. |
||
Ulrich Drepper
|
a334319f65 | (CFLAGS-tst-align.c): Add -mpreferred-stack-boundary=4. | ||
Jakub Jelinek
|
0ecb606cb6 | 2.5-18.1 | ||
Andreas Jaeger
|
30b7ba1d27 | (__SYSCALL_CLOBBERS): Add "memory". | ||
Andreas Jaeger
|
7851f30f8b | Add semtimedop. | ||
Roland McGrath
|
d057b5e76c |
* sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h: Remove
"#if 0" surrounding most of contents. (SYSCALL_ERROR_LABEL): Define. (__SYSCALL_CLOBBERS): Add $10. (internal_syscall7): Remove. * sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h: Likewise. |
||
Ulrich Drepper
|
4a244f0dce |
Update.
2003-09-02 Jakub Jelinek <jakub@redhat.com> * sysdeps/unix/sysv/linux/alpha/Makefile (sysdep_routines): Remove rt_sigsuspend, rt_sigprocmask, rt_sigtimedwait, rt_sigqueueinfo and rt_sigpending. * sysdeps/unix/sysv/linux/alpha/sigaction.c (__syscall_rt_sigaction): New prototype. * sysdeps/unix/sysv/linux/arm/syscalls.list (__syscall_*): Remove unused __syscall_ stubs. * sysdeps/unix/sysv/linux/arm/Makefile (sysdep_routines): Remove rt_*. * sysdeps/unix/sysv/linux/cris/Makefile: Removed. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (__syscall_recvfrom, __syscall_sendto): Remove unused aliases. * sysdeps/unix/sysv/linux/mips/syscalls.list (__syscall_*): Remove unused __syscall_ stubs. * sysdeps/unix/sysv/linux/mips/Makefile (sysdep_routines): Remove rt_*. * sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list (__syscall_*): Remove unused __syscall_ stubs. * sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list (__syscall_*): Likewise. * sysdeps/unix/sysv/linux/powerpc/Makefile (sysdep_routines): Remove rt_*. * sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (__syscall_*): Remove unused __syscall_ stubs. * sysdeps/unix/sysv/linux/sh/Makefile (sysdep_routines): Remove rt_*. * sysdeps/unix/sysv/linux/rt_sigaction.c: Removed. * sysdeps/unix/sysv/linux/rt_sigpending.c: Removed. * sysdeps/unix/sysv/linux/rt_sigprocmask.c: Removed. * sysdeps/unix/sysv/linux/rt_sigqueueinfo.c: Removed. * sysdeps/unix/sysv/linux/rt_sigreturn.c: Removed. * sysdeps/unix/sysv/linux/rt_sigsuspend.c: Removed. * sysdeps/unix/sysv/linux/rt_sigtimedwait.c: Removed. * sysdeps/unix/sysv/linux/s_pread64.c: Removed. * sysdeps/unix/sysv/linux/s_pwrite64.c: Removed. * sysdeps/unix/sysv/linux/alpha/gethostname.c: Remove unused __syscall_* prototypes. * sysdeps/unix/sysv/linux/alpha/ipc_priv.h: Likewise. * sysdeps/unix/sysv/linux/alpha/msgctl.c: Likewise. * sysdeps/unix/sysv/linux/alpha/semctl.c: Likewise. * sysdeps/unix/sysv/linux/alpha/shmctl.c: Likewise. * sysdeps/unix/sysv/linux/arm/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/i386/chown.c: Likewise. * sysdeps/unix/sysv/linux/i386/fchown.c: Likewise. * sysdeps/unix/sysv/linux/i386/fcntl.c: Likewise. * sysdeps/unix/sysv/linux/i386/fxstat.c: Likewise. * sysdeps/unix/sysv/linux/i386/getegid.c: Likewise. * sysdeps/unix/sysv/linux/i386/geteuid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setuid.c: Likewise. * sysdeps/unix/sysv/linux/i386/getgid.c: Likewise. * sysdeps/unix/sysv/linux/i386/getgroups.c: Likewise. * sysdeps/unix/sysv/linux/i386/getmsg.c: Likewise. * sysdeps/unix/sysv/linux/i386/xstat.c: Likewise. * sysdeps/unix/sysv/linux/i386/getresgid.c: Likewise. * sysdeps/unix/sysv/linux/i386/getresuid.c: Likewise. * sysdeps/unix/sysv/linux/i386/getrlimit.c: Likewise. * sysdeps/unix/sysv/linux/i386/getuid.c: Likewise. * sysdeps/unix/sysv/linux/i386/lchown.c: Likewise. * sysdeps/unix/sysv/linux/i386/lockf64.c: Likewise. * sysdeps/unix/sysv/linux/i386/lxstat.c: Likewise. * sysdeps/unix/sysv/linux/i386/putmsg.c: Likewise. * sysdeps/unix/sysv/linux/i386/setfsgid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setfsuid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setgid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setgroups.c: Likewise. * sysdeps/unix/sysv/linux/i386/setregid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setresgid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setresuid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setreuid.c: Likewise. * sysdeps/unix/sysv/linux/i386/setrlimit.c: Likewise. * sysdeps/unix/sysv/linux/i386/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/ia64/fxstat.c: Likewise. * sysdeps/unix/sysv/linux/ia64/lxstat.c: Likewise. * sysdeps/unix/sysv/linux/ia64/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/ia64/sigpending.c: Likewise. * sysdeps/unix/sysv/linux/ia64/sigprocmask.c: Likewise. * sysdeps/unix/sysv/linux/ia64/sigsuspend.c: Likewise. * sysdeps/unix/sysv/linux/ia64/xstat.c: Likewise. * sysdeps/unix/sysv/linux/m68k/chown.c: Likewise. * sysdeps/unix/sysv/linux/mips/ftruncate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/pread.c: Likewise. * sysdeps/unix/sysv/linux/mips/pread64.c: Likewise. * sysdeps/unix/sysv/linux/mips/ptrace.c: Likewise. * sysdeps/unix/sysv/linux/mips/pwrite.c: Likewise. * sysdeps/unix/sysv/linux/mips/pwrite64.c: Likewise. * sysdeps/unix/sysv/linux/mips/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/mips/truncate64.c: Likewise. * sysdeps/unix/sysv/linux/mips/ustat.c: Likewise. * sysdeps/unix/sysv/linux/mips/xmknod.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/chown.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/ioctl.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/chown.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/lchown.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/xstat.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/fxstat.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/lxstat.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigpending.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigprocmask.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sigsuspend.c: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sigpending.c: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sigprocmask.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/pwrite.c: Likewise. * sysdeps/unix/sysv/linux/execve.c: Likewise. * sysdeps/unix/sysv/linux/aio_sigqueue.c: Likewise. * sysdeps/unix/sysv/linux/reboot.c: Likewise. * sysdeps/unix/sysv/linux/_exit.c: Likewise. * sysdeps/unix/sysv/linux/ftruncate64.c: Likewise. * sysdeps/unix/sysv/linux/pwrite64.c: Likewise. * sysdeps/unix/sysv/linux/fxstat64.c: Likewise. * sysdeps/unix/sysv/linux/gai_sigqueue.c: Likewise. * sysdeps/unix/sysv/linux/readahead.c: Likewise. * sysdeps/unix/sysv/linux/getcwd.c: Likewise. * sysdeps/unix/sysv/linux/sigwait.c: Likewise. * sysdeps/unix/sysv/linux/getdents.c: Likewise. * sysdeps/unix/sysv/linux/readv.c: Likewise. * sysdeps/unix/sysv/linux/getpriority.c: Likewise. * sysdeps/unix/sysv/linux/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/ipc_priv.h: Likewise. * sysdeps/unix/sysv/linux/llseek.c: Likewise. * sysdeps/unix/sysv/linux/sysctl.c: Likewise. * sysdeps/unix/sysv/linux/lxstat64.c: Likewise. * sysdeps/unix/sysv/linux/mmap64.c: Likewise. * sysdeps/unix/sysv/linux/ustat.c: Likewise. * sysdeps/unix/sysv/linux/poll.c: Likewise. * sysdeps/unix/sysv/linux/pread64.c: Likewise. * sysdeps/unix/sysv/linux/writev.c: Likewise. * sysdeps/unix/sysv/linux/pread.c: Likewise. * sysdeps/unix/sysv/linux/ptrace.c: Likewise. * sysdeps/unix/sysv/linux/sigpending.c: Likewise. * sysdeps/unix/sysv/linux/sigprocmask.c: Likewise. * sysdeps/unix/sysv/linux/sigqueue.c: Likewise. * sysdeps/unix/sysv/linux/sigsuspend.c: Likewise. * sysdeps/unix/sysv/linux/sigtimedwait.c: Likewise. * sysdeps/unix/sysv/linux/sigwaitinfo.c: Likewise. * sysdeps/unix/sysv/linux/truncate64.c: Likewise. * sysdeps/unix/sysv/linux/xmknod.c: Likewise. * sysdeps/unix/sysv/linux/xstat64.c: Likewise. 2003-09-02 Jakub Jelinek <jakub@redhat.com> * sysdeps/unix/sysv/linux/i386/sysdep.h (PSEUDO): Revert last change. * sysdeps/unix/sysv/linux/powerpc/syscalls.list: New file. * sysdeps/unix/sysv/linux/sparc/syscalls.list: New file. * stdio-common/Makefile (CFLAGS-vprintf.c): Add -fexceptions. * intl/loadmsgcat.c: For _LIBC, call not cancelable versions of open, close, and read. |
||
Andreas Jaeger
|
cb76029b4d |
2003-05-30 Guido Guenther <agx@sigxcpu.org>
* sysdeps/mips/mips64/bsd-_setjmp.S: Include <sys/asm.h> for SETUP_GP64 and friends. * sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h: Fix register names in internal_syscall{6,7}. * sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/mips/pread.c [_MIPS_SIM == _ABI64]: Fix number of syscall arguments. * sysdeps/unix/sysv/linux/mips/pwrite.c: Likewise. * sysdeps/unix/sysv/linux/mips/pread64.c: Likewise. * sysdeps/unix/sysv/linux/mips/pwrite64.c: Likewise. |
||
Alexandre Oliva
|
743f1874ad |
* sysdeps/unix/sysv/linux/mips/mips64/n32/ftruncate64.c: New. * sysdeps/unix/sysv/linux/mips/mips64/n32/truncate64.c: New. * sysdeps/unix/sysv/linux/kernel-features.h: fcntl64 is available on mips n32. * sysdeps/unix/sysv/linux/mips/kernel_stat.h: Explain why XSTAT_IS_XSTAT64 must not be used for mips n64. Use 64-bit data structure on n32 as well. * sysdeps/unix/sysv/linux/mips/bits/stat.h: Use POSIX-compliant data types on n32 and n64.
2003-04-05 Alexandre Oliva <aoliva@redhat.com> * sysdeps/unix/sysv/linux/mips/mips64/n32/ftruncate64.c: New. * sysdeps/unix/sysv/linux/mips/mips64/n32/truncate64.c: New. * sysdeps/unix/sysv/linux/kernel-features.h: fcntl64 is available on mips n32. * sysdeps/unix/sysv/linux/mips/kernel_stat.h: Explain why XSTAT_IS_XSTAT64 must not be used for mips n64. Use 64-bit data structure on n32 as well. * sysdeps/unix/sysv/linux/mips/bits/stat.h: Use POSIX-compliant data types on n32 and n64. |
||
Alexandre Oliva
|
bfd49d5558 |
* sysdeps/unix/sysv/linux/mips/mips64/n64/ioctl.S: Sign-extend with a single instruction.
* sysdeps/unix/sysv/linux/mips/mips64/n64/ioctl.S: Sign-extend with a single instruction. |
||
Alexandre Oliva
|
5a0e429dd8 |
* sysdeps/mips/mips64/Implies: Move wordsize-64 to... * sysdeps/mips/mips64/n64/Implies: New file. * sysdeps/mips/mips64/n64/Makefile: New file. * sysdeps/mips/mips64/n64/el/bits/endian.h: New file. * sysdeps/mips/mips64/n32/Implies: New file. * sysdeps/mips/mips64/n32/Makefile: New file. * sysdeps/mips/mips64/n32/el/bits/endian.h: New file. * sysdeps/unix/mips/mips64/n32/sysdep.h: New file. * sysdeps/unix/mips/mips64/n64/sysdep.h: New file. * sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h: New file. * sysdeps/unix/sysv/linux/mips/mips64/n64/glob64.c: New file. * sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h: New file. * sysdeps/unix/sysv/linux/mips/mips64/ldconfig.h: New file. * sysdeps/unix/sysv/linux/mips/mips64/llseek.c: New file. * sysdeps/unix/sysv/linux/mips/mips64/recv.c: New file. * sysdeps/unix/sysv/linux/mips/mips64/send.c: New file. * sysdeps/unix/sysv/linux/mips/mips64/syscall.S: New file. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list: New file. * sysdeps/unix/sysv/linux/mips/mips64/umount.c: New file. * sysdeps/unix/sysv/linux/mips/mips64/n64/ioctl.S: New file.
* sysdeps/mips/mips64/Implies: Move wordsize-64 to... * sysdeps/mips/mips64/n64/Implies: New file. * sysdeps/mips/mips64/n64/Makefile: New file. * sysdeps/mips/mips64/n64/el/bits/endian.h: New file. * sysdeps/mips/mips64/n32/Implies: New file. * sysdeps/mips/mips64/n32/Makefile: New file. * sysdeps/mips/mips64/n32/el/bits/endian.h: New file. * sysdeps/unix/mips/mips64/n32/sysdep.h: New file. * sysdeps/unix/mips/mips64/n64/sysdep.h: New file. * sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h: New file. * sysdeps/unix/sysv/linux/mips/mips64/n64/glob64.c: New file. * sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h: New file. * sysdeps/unix/sysv/linux/mips/mips64/ldconfig.h: New file. * sysdeps/unix/sysv/linux/mips/mips64/llseek.c: New file. * sysdeps/unix/sysv/linux/mips/mips64/recv.c: New file. * sysdeps/unix/sysv/linux/mips/mips64/send.c: New file. * sysdeps/unix/sysv/linux/mips/mips64/syscall.S: New file. * sysdeps/unix/sysv/linux/mips/mips64/syscalls.list: New file. * sysdeps/unix/sysv/linux/mips/mips64/umount.c: New file. * sysdeps/unix/sysv/linux/mips/mips64/n64/ioctl.S: New file. |
||
Alexandre Oliva
|
fc32835abb |
* sysdeps/unix/sysv/linux/configure.in (libc_cv_slibdir): Use lib64 for mips64/n64 and lib32 for mips64/n32. (ldd_rewrite_script): Needed for all mips64 configurations. * sysdeps/unix/sysv/linux/configure: Rebuilt. * sysdeps/unix/sysv/linux/mips/mips64/ldd-rewrite.sed: New file. * sysdeps/unix/sysv/linux/mips/mips64/Dist: New file.
* sysdeps/unix/sysv/linux/configure.in (libc_cv_slibdir): Use lib64 for mips64/n64 and lib32 for mips64/n32. (ldd_rewrite_script): Needed for all mips64 configurations. * sysdeps/unix/sysv/linux/configure: Rebuilt. * sysdeps/unix/sysv/linux/mips/mips64/ldd-rewrite.sed: New file. * sysdeps/unix/sysv/linux/mips/mips64/Dist: New file. |