Initially, IBT and SHSTK are marked as active when CPU supports them
and CET are enabled in glibc. They can be disabled early by tunables
before relocation. Since after relocation, GLRO(dl_x86_cpu_features)
becomes read-only, we can't update GLRO(dl_x86_cpu_features) to mark
IBT and SHSTK as inactive. Instead, check the feature_1 field in TCB
to decide if IBT and SHST are active.
Previously, CET was enabled by kernel before passing control to user
space and the startup code must disable CET if applications or shared
libraries aren't CET enabled. Since the current kernel only supports
shadow stack and won't enable shadow stack before passing control to
user space, we need to enable shadow stack during startup if the
application and all shared library are shadow stack enabled. There
is no need to disable shadow stack at startup. Shadow stack can only
be enabled in a function which will never return. Otherwise, shadow
stack will underflow at the function return.
1. GL(dl_x86_feature_1) is set to the CET features which are supported
by the processor and are not disabled by the tunable. Only non-zero
features in GL(dl_x86_feature_1) should be enabled. After enabling
shadow stack with ARCH_SHSTK_ENABLE, ARCH_SHSTK_STATUS is used to check
if shadow stack is really enabled.
2. Use ARCH_SHSTK_ENABLE in RTLD_START in dynamic executable. It is
safe since RTLD_START never returns.
3. Call arch_prctl (ARCH_SHSTK_ENABLE) from ARCH_SETUP_TLS in static
executable. Since the start function using ARCH_SETUP_TLS never returns,
it is safe to enable shadow stack in ARCH_SETUP_TLS.
Sync with Linux kernel 6.6 shadow stack interface. Since only x86-64 is
supported, i386 shadow stack codes are unchanged and CET shouldn't be
enabled for i386.
1. When the shadow stack base in TCB is unset, the default shadow stack
is in use. Use the current shadow stack pointer as the marker for the
default shadow stack. It is used to identify if the current shadow stack
is the same as the target shadow stack when switching ucontexts. If yes,
INCSSP will be used to unwind shadow stack. Otherwise, shadow stack
restore token will be used.
2. Allocate shadow stack with the map_shadow_stack syscall. Since there
is no function to explicitly release ucontext, there is no place to
release shadow stack allocated by map_shadow_stack in ucontext functions.
Such shadow stacks will be leaked.
3. Rename arch_prctl CET commands to ARCH_SHSTK_XXX.
4. Rewrite the CET control functions with the current kernel shadow stack
interface.
Since CET is no longer enabled by kernel, a separate patch will enable
shadow stack during startup.
Code is mostly inspired from the LoongArch one, which has a similar ABI,
with minor changes to support riscv32 and register differences.
This fixes elf/tst-sprof-basic. This also fixes elf/tst-audit1,
elf/tst-audit2 and elf/tst-audit8 with recent binutils snapshots when
--enable-bind-now is used.
Resolves: BZ #31151
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Similar to other printf-like ones. It requires to be in a different
process so we can change the orientation of stdout.
Checked on aarch64, armhf, x86_64, and i686.
It requires to be in a container tests to avoid logging bogus
information on the system. The syslog also requires to be checked in
a different process because the internal printf call will abort with
the internal syslog lock taken (which makes subsequent syslog calls
deadlock).
Checked on aarch64, armhf, x86_64, and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The fortify wrappers for varargs functions already add fallbacks to
builtins calls if __va_arg_pack is not supported.
Checked on aarch64, armhf, x86_64, and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
_dl_tlsdesc_undefweak and _dl_tlsdesc_dynamic access the thread pointer
via the tcb field in TCB:
_dl_tlsdesc_undefweak:
_CET_ENDBR
movq 8(%rax), %rax
subq %fs:0, %rax
ret
_dl_tlsdesc_dynamic:
...
subq %fs:0, %rax
movq -8(%rsp), %rdi
ret
Since the tcb field in TCB is a pointer, %fs:0 is a 32-bit location,
not 64-bit. It should use "sub %fs:0, %RAX_LP" instead. Since
_dl_tlsdesc_undefweak returns ptrdiff_t and _dl_make_tlsdesc_dynamic
returns void *, RAX_LP is appropriate here for x32 and x86-64. This
fixes BZ #31185.
On x32, I got
FAIL: elf/tst-tlsgap
$ gdb elf/tst-tlsgap
...
open tst-tlsgap-mod1.so
Thread 2 "tst-tlsgap" received signal SIGSEGV, Segmentation fault.
[Switching to LWP 2268754]
_dl_tlsdesc_dynamic () at ../sysdeps/x86_64/dl-tlsdesc.S:108
108 movq (%rsi), %rax
(gdb) p/x $rsi
$4 = 0xf7dbf9005655fb18
(gdb)
This is caused by
_dl_tlsdesc_dynamic:
_CET_ENDBR
/* Preserve call-clobbered registers that we modify.
We need two scratch regs anyway. */
movq %rsi, -16(%rsp)
movq %fs:DTV_OFFSET, %rsi
Since the dtv field in TCB is a pointer, %fs:DTV_OFFSET is a 32-bit
location, not 64-bit. Load the dtv field to RSI_LP instead of rsi.
This fixes BZ #31184.
No bug because this is not visible if glibc is built with
optimization. Otherwise this would be a critical resource leak.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
In permissive mode, don't disable IBT nor SHSTK when dlopening a legacy
shared library if not single threaded since IBT and SHSTK may be still
enabled in other threads. Other threads with IBT or SHSTK enabled will
crash when calling functions in the legacy shared library. Instead, an
error will be issued.
Improve readability and make maintenance easier for dl-feature.c by
modularizing sysdeps/x86/dl-cet.c:
1. Support processors with:
a. Only IBT. Or
b. Only SHSTK. Or
c. Both IBT and SHSTK.
2. Lock CET features only if IBT or SHSTK are enabled and are not
enabled permissively.
This is a minimal regression test for bug 29039 which only affects
targets with TLSDESC and a reproducer requires that
1) Have modid gaps (closed modules) with old generation.
2) Update a DTV to a newer generation (needs a newer dlopen).
3) But do not update the closed gap entry in that DTV.
4) Reuse the modid gap for a new module (another dlopen).
5) Use dynamic TLSDESC in that new module with old generation (bug).
6) Access TLS via this TLSDESC and the now outdated DTV.
However step (3) in practice rarely happens: during DTV update the
entries for closed modids are initialized to "unallocated" and then
dynamic TLSDESC calls __tls_get_addr independently of its generation.
The only exception to this is DTV setup at thread creation (gaps are
initialized to NULL instead of unallocated) or DTV resize where the
gap entries are outside the previous DTV array (again NULL instead
of unallocated, and this requires loading > DTV_SURPLUS modules).
So the bug can only cause NULL (+ offset) dereference, not use after
free. And the easiest way to get (3) is via thread creation.
Note that step (5) requires that the newly loaded module has larger
TLS than the remaining optional static TLS. And for (6) there cannot
be other TLS access or dlopen in the thread that updates the DTV.
Tested on aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Added annotations for autovec by GCC and GFortran - this enables GCC
>= 9 to autovectorise math calls at -Ofast.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Compilers may emit calls to 'half-width' routines (two-lane
single-precision variants). These have been added in the form of
wrappers around the full-width versions, where the low half of the
vector is simply duplicated. This will perform poorly when one lane
triggers the special-case handler, as there will be a redundant call
to the scalar version, however this is expected to be rare at Ofast.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
If /tmp is mounted nosuid and make xcheck is run,
then tst-env-setuid fails UNSUPPORTED with "SGID failed: GID and EGID match"
and /var/tmp/tst-sonamemove-runmod1.so.profile is created.
If you then try to rerun the test with a suid mounted test-dir
(the SGID binary is created in test-dir which defaults to /tmp)
with something like that:
make tst-env-setuid-ENV="TMPDIR=..." t=elf/tst-env-setuid test
the test fails as the LD_PROFILE output file is still available
from the previous run.
Thus this patch removes the LD_PROFILE output file in parent
before spawning the SGID binary.
Even if LD_PROFILE is not supported anymore in static binaries,
use a different library and thus output file for tst-env-setuid
and tst-env-setuid-static in order to not interfere if both
tests are run in parallel.
Furthermore the checks in test_child are now more verbose.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When _FORTIFY_SOURCE is defined to 2, ____longjmp_chk is called,
instead of longjmp. ____longjmp_chk compares the relative stack
values to decide if it is called from a stack frame which called
setjmp. If not, ____longjmp_chk assumes that an alternate signal
stack is used. Since comparing the relative stack values isn't
reliable with user context, when there is no signal, ____longjmp_chk
will fail. Undefine _FORTIFY_SOURCE to avoid ____longjmp_chk in
user context test.
The expression
(excepts & FE_ALL_EXCEPT) << 27
produces a signed integer overflow when 'excepts' is specified as
FE_INVALID (= 0x10), because
- excepts is of type 'int',
- FE_ALL_EXCEPT is of type 'int',
- thus (excepts & FE_ALL_EXCEPT) is (int) 0x10,
- 'int' is 32 bits wide.
The patched code produces the same instruction sequence as
previosuly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It clears some exception flags that are outside the EXCEPTS argument.
It fixes math/test-fexcept on qemu-user.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
libc_feupdateenv_riscv should check for FE_DFL_ENV, similar to
libc_fesetenv_riscv.
Also extend the test-fenv.c to test fenvupdate.
Checked on riscv under qemu-system.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
According to ISO C23 (7.6.4.4), fesetexcept is supposed to set
floating-point exception flags without raising a trap (unlike
feraiseexcept, which is supposed to raise a trap if feenableexcept
was called with the appropriate argument).
The flags can be set in the 387 unit or in the SSE unit. When we need
to clear a flag, we need to do so in both units, due to the way
fetestexcept is implemented.
When we need to set a flag, it is sufficient to do it in the SSE unit,
because that is guaranteed to not trap. However, on i386 CPUs that have
only a 387 unit, set the flags in the 387, as long as this cannot trap.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
According to ISO C23 (7.6.4.4), fesetexcept is supposed to set
floating-point exception flags without raising a trap (unlike
feraiseexcept, which is supposed to raise a trap if feenableexcept
was called with the appropriate argument).
The flags can be set in the 387 unit or in the SSE unit. To set
a flag, it is sufficient to do it in the SSE unit, because that is
guaranteed to not trap. However, on i386 CPUs that have only a
387 unit, set the flags in the 387, as long as this cannot trap.
Checked on i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
According to ISO C23 (7.6.4.4), fesetexcept is supposed to set
floating-point exception flags without raising a trap (unlike
feraiseexcept, which is supposed to raise a trap if feenableexcept was
called with the appropriate argument).
This is a side-effect of how we implement the GNU extension
feenableexcept, where feenableexcept/fesetenv/fesetmode/feupdateenv
might issue prctl (PR_SET_FPEXC, PR_FP_EXC_PRECISE) depending of the
argument. And on PR_FP_EXC_PRECISE, setting a floating-point exception
flag triggers a trap.
To make the both functions follow the C23, fesetexcept and
fesetexceptflag now fail if the argument may trigger a trap.
The math tests now check for an value different than 0, instead
of bail out as unsupported for EXCEPTION_SET_FORCES_TRAP.
Checked on powerpc64le-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The loader now warns for invalid and out-of-range tunable values. The
patch also fixes the parsing of size_t maximum values, where
_dl_strtoul was failing for large values close to SIZE_MAX.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The tunable parsing duplicates the tunable environment variable so it
null-terminates each one since it simplifies the later parsing. It has
the drawback of adding another point of failure (__minimal_malloc
failing), and the memory copy requires tuning the compiler to avoid mem
operations calls.
The parsing now tracks the tunable start and its size. The
dl-tunable-parse.h adds helper functions to help parsing, like a strcmp
that also checks for size and an iterator for suboptions that are
comma-separated (used on hwcap parsing by x86, powerpc, and s390x).
Since the environment variable is allocated on the stack by the kernel,
it is safe to keep the references to the suboptions for later parsing
of string tunables (as done by set_hwcaps by multiple architectures).
Checked on x86_64-linux-gnu, powerpc64le-linux-gnu, and
aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Since GCC commit f31a019d1161ec78846473da743aedf49cca8c27 "Emit
funcall external declarations only if actually used.", the glibc
testsuite has failed to build for 32-bit SPARC with GCC mainline.
/scratch/jmyers/glibc-bot/install/compilers/sparc64-linux-gnu/lib/gcc/sparc64-glibc-linux-gnu/14.0.0/../../../../sparc64-glibc-linux-gnu/bin/ld: /scratch/jmyers/glibc-bot/install/compilers/sparc64-linux-gnu/lib/gcc/sparc64-glibc-linux-gnu/14.0.0/32/libgcc.a(_divsi3.o): in function `.div':
/scratch/jmyers/glibc-bot/src/gcc/libgcc/config/sparc/lb1spc.S:138: multiple definition of `.div'; /scratch/jmyers/glibc-bot/build/glibcs/sparcv9-linux-gnu/glibc/libc.a(sdiv.o):/scratch/jmyers/glibc-bot/src/glibc/gnulib/../sysdeps/sparc/sparc32/sparcv9/sdiv.S:13: first defined here
/scratch/jmyers/glibc-bot/install/compilers/sparc64-linux-gnu/lib/gcc/sparc64-glibc-linux-gnu/14.0.0/../../../../sparc64-glibc-linux-gnu/bin/ld: disabling relaxation; it will not work with multiple definitions
collect2: error: ld returned 1 exit status
make[3]: *** [../Rules:298: /scratch/jmyers/glibc-bot/build/glibcs/sparcv9-linux-gnu/glibc/nptl/tst-cancel24-static] Error 1
https://sourceware.org/pipermail/libc-testresults/2023q4/012154.html
I'm not sure of the exact sequence of undefined references that cause
first the glibc object file defining .div and then the libgcc object
file defining both .div and .udiv to be pulled in (which must have
been perturbed by that GCC change in a way that introduced the build
failure), but I think the failure illustrates that it's inherently
fragile for glibc to define symbols in separate object files that
libgcc defines in the same object file - and indeed for glibc to
redefine libgcc symbols at all, since the division into object files
shouldn't really be part of the interface between libgcc and libc.
These symbols appear to be in libc only for compatibility, maybe one
of the cases where they were accidentally exported from shared libc in
glibc 2.0 before the introduction of symbol versioning and so programs
started expecting shared libc to provide them. Thus, there is no need
to have them in static libc. Add this set of libgcc functions to
shared-only-routines so they are no longer provided in static libc.
(No change is made regarding .mul - dotmul source file - since unlike
the other symbols in this grouping, it doesn't actually appear to be a
libgcc symbol, at least in current GCC.)
Tested with build-many-glibcs.py for sparcv9-linux-gnu with GCC
mainline.
Verify that legacy shadow stack code in .init_array section in application
and shared library, which are marked as shadow stack enabled, will trigger
segfault.
So far if the ucontext structure was obtained by getcontext and co,
the return address was stored in general purpose register 14 as
it is defined as return address in the ABI.
In contrast, the context passed to a signal handler contains the address
in psw.addr field.
If somebody e.g. wants to dump the address of the context, the origin
needs to be known.
Now this patch adjusts getcontext and friends and stores the return address
also in psw.addr field.
Note that setcontext isn't adjusted and it is not supported to pass a
ucontext structure from signal-handler to setcontext. We are not able to
restore all registers and branching to psw.addr without clobbering one
register.
This commit uses a common implementation 'strlen-evex-base.S' for both
'strlen-evex' and 'strlen-evex512'
The motivation is to reduce the number of implementations to maintain.
This incidentally gives a small performance improvement.
All tests pass on x86.
Benchmarks were taken on SKX.
https://www.intel.com/content/www/us/en/products/sku/123613/intel-core-i97900x-xseries-processor-13-75m-cache-up-to-4-30-ghz/specifications.html
Geometric mean for strlen-evex512 over all benchmarks (N=10) was (new/old) 0.939
Geometric mean for wcslen-evex512 over all benchmarks (N=10) was (new/old) 0.965
Code Size Changes:
strlen-evex512.S : +24 bytes
wcslen-evex512.S : +54 bytes
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Since shadow stack (SHSTK) is enabled in the Linux kernel without
enabling indirect branch tracking (IBT), don't assume that SHSTK
implies IBT. Use "CPU_FEATURE_ACTIVE (IBT)" to check if IBT is active
and "CPU_FEATURE_ACTIVE (SHSTK)" to check if SHSTK is active.
Hello! I am Indonesian, was born and raised in Indonesia and still do live in
Indonesia.
This patch brings a few changes to the time locales of id_ID, which
includes :
\- Defining am_pm and time_fmpt_ampm
\- Changing time_fmt and d_t_fmt to use the 24-hour format
\- Changing first_weekday to Monday
This is a squashed version of what is previously a 5 patch set
Here are reasons and details of the changes :
Change 1 part 1
id_ID: Define `am_pm` string
Current formatting does not define am_pm string, leading to AM and PM
not being specified in 12 H time format. This change defines the string
by changing it from an empty string to "AM";"PM".
output of `date +%r`:
before commit: 01:23
after commit: 01:23 PM
Change 1 part 2
id_ID: Define time_fmt_ampm, change from an empty string
Currently, time_fmpt_ampm is set to an empty string, causing some
programs to not be able to display time in the 12-hour format, for
example, glib: https://gitlab.gnome.org/GNOME/glib/-/issues/2967.
This commit changes it from an empty string to "%I:%M:%S %p"
Change 2 part 1
id_ID: Use 24-hour format for time_fmt
Indonesian standard and formal time format uses the 24-hour format inst-
ead of the 12-hour format. This commit aims to change the id_ID locale's
time_fmt to match that accordingly.
Change 2 part 2
id_ID: Use 24-hour format for d_t_fmt.
Indonesian standard and formal time format uses the 24-hour format inst-
ead of the 12-hour format. This commit aims to change the id_ID locale's
d_t_fmt to match that accordingly.
Change 3
id_ID: Change first_weekday to monday
Indonesian calendar starts of the week with Monday, let's comply
Message-ID: <20230821035530.9075-1-rushing27alien@gmail.com>
Resolves: BZ # 30412
Reviewed-by: Mike Fabian <mfabian@redhat.com>
