Commit Graph

6 Commits

Author SHA1 Message Date
Paul Eggert
2b778ceb40 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
2021-01-02 12:17:34 -08:00
Lukasz Majewski
b8d3e8fbaa y2038: nptl: Convert sem_{clock|timed}wait to support 64 bit time
The sem_clockwait and sem_timedwait have been converted to support 64 bit time.

This change reuses futex_abstimed_wait_cancelable64 function introduced earlier.
The sem_{clock|timed}wait only accepts absolute time. Moreover, there is no
need to check for NULL passed as *abstime pointer to the syscalls as both calls
have exported symbols marked with __nonull attribute for abstime.

For systems with __TIMESIZE != 64 && __WORDSIZE == 32:
- Conversion from 32 bit time to 64 bit struct __timespec64 was necessary
- Redirection to __sem_{clock|timed}wait64 will provide support for 64 bit
  time

Build tests:
./src/scripts/build-many-glibcs.py glibcs

Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
  https://github.com/lmajewski/meta-y2038 and run tests:
  https://github.com/lmajewski/y2038-tests/commits/master

Above tests were performed with Y2038 redirection applied as well as without
to test the proper usage of both __sem_{clock|timed}wait64 and
__sem_{clock|timed}wait.

Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-09-14 09:37:10 +02:00
Joseph Myers
d614a75396 Update copyright dates with scripts/update-copyrights. 2020-01-01 00:14:33 +00:00
Lukasz Majewski
4812365660 time: Introduce function to check correctness of nanoseconds value
The valid_nanoseconds () static inline function has been introduced to
check if nanoseconds value is in the correct range - greater or equal to
zero and less than 1000000000.

The explicit #include <time.h> has been added to files where it was
missing.

The __syscall_slong_t type for ns has been used to avoid issues on x32.

Tested with:
- scripts/build-many-glibcs.py
- make PARALLELMFLAGS="-j12" && make PARALLELMFLAGS="-j12" xcheck on x86_64
2019-10-27 21:49:25 +01:00
Paul Eggert
5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00
Mike Crowe
6615f77978 nptl: Add POSIX-proposed sem_clockwait
Add:

 int sem_clockwait (sem_t *sem, clockid_t clock, const struct timespec
*abstime)

which behaves just like sem_timedwait, but measures abstime against the
specified clock. Currently supports CLOCK_REALTIME and CLOCK_MONOTONIC
and sets errno == EINVAL if any other clock is specified.

	* nptl/sem_waitcommon.c (do_futex_wait, __new_sem_wait_slow): Add
	clockid parameters to indicate the clock which abstime should be
	measured against.
	* nptl/sem_timedwait.c (sem_timedwait), nptl/sem_wait.c
	(__new_sem_wait): Pass CLOCK_REALTIME as clockid to
	__new_sem_wait_slow.
	* nptl/sem_clockwait.c: New file to implement sem_clockwait based
	on sem_timedwait.c.
	* nptl/Makefile: Add sem_clockwait.c source file. Add CFLAGS for
	sem_clockwait.c to match those used for sem_timedwait.c.
	* sysdeps/pthread/semaphore.h: Add sem_clockwait.
	* nptl/Versions (GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
	(GLIBC_2.30): Likewise.
	* nptl/tst-sem17.c: Add new test for passing invalid clock to
	sem_clockwait.
	* nptl/tst-sem13.c, nptl/tst-sem5.c: Modify existing sem_timedwait
	tests to also test sem_clockwait.
	* manual/threads.texi: Document sem_clockwait.

Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-07-12 13:36:23 +00:00