Testing with GCC 7 for 32-bit x86 showed some ulps differences,
presumably from variation in when values with excess precision get
spilled to the stack and so lose that precision. This patch updates
the libm-test-ulps files accordingly.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
Building for x86_64 with float128 support, I get a localplt test
failure from lrintf128 calling feraiseexcept.
The problem is that an inline optimized version of feraiseexcept calls
__feraiseexcept_renamed in cases where it doesn't completely expand
inline, and that in turn is redirected to feraiseexcept for a library
call, so meaning the redirection of feraiseexcept to
__GI_feraiseexcept inside libm is lost for that call.
This patch fixes the problem by moving the redirect to an internal
header in the _LIBC case, with the internal header using
__GI_feraiseexcept where appropriate.
Tested for x86_64 (in conjunction with float128 patches).
* sysdeps/x86/fpu/bits/fenv.h [_LIBC] (__feraiseexcept_renamed):
Do not declare.
* sysdeps/x86/fpu/include/bits/fenv.h [_LIBC &&
__USE_EXTERN_INLINES] (__feraiseexcept_renamed): Declare here,
redirected to __GI_feraiseexcept if [SHARED && IS_IN (libm)].
This code:
L(between_2_3):
/* Load as big endian with overlapping loads and bswap to avoid
branches. */
movzwl -2(%rdi, %rdx), %eax
movzwl -2(%rsi, %rdx), %ecx
shll $16, %eax
shll $16, %ecx
movzwl (%rdi), %edi
movzwl (%rsi), %esi
orl %edi, %eax
orl %esi, %ecx
bswap %eax
bswap %ecx
subl %ecx, %eax
ret
needs a saturating subtract because the full register is used.
With this commit, only the lower 24 bits of the register are used,
so a regular subtraction suffices.
The test case change adds coverage for these kinds of bugs.
Similar to the other functions in the strfrom class, strfromf128 calls
__printf_fp in order to convert the floating-point value to characters.
This requires the value of IO_MTSAFE_IO.
Tested for powerpc64le and s390x.
* sysdeps/ieee754/float128/Makefile (CFLAGS-strfromf128.c): Add
$(libio-mtsafe) to get the value of IO_MTSAFE_IO.
Most significant changes are code simplification and use of doubles for
intermediate values. Also, some rearrangement to move early
non-dependent code later, out of the faster paths.
* sysdeps/ieee754/flt-32/e_powf.c: Optimized implementation utilizing
rearranged code and doubles float types.
sysdeps/powerpc/powerpc64/fpu/multiarch/s_sinf-ppc64.c should fall back to
sysdeps/powerpc/fpu/s_sinf.c not to sysdeps/ieee754/flt-32/s_sinf.c.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_sinf-ppc64.c: Change
s_sinf.c from sysdeps/ieee754/flt-32/ to sysdeps/powerpc/fpu/.
Commit cdfbe5037f added sysconf support
for cache geometries on powerpc, but mishandled errno. For valid input
parameters, sysconf() should not set errno.
* sysdeps/unix/sysv/linux/powerpc/sysconf.c: Remove references
to errno, and simplify remaining related code.
Linux commit ID a4700a26107241cc7b9ac8528b2c6714ff99983d reserved 2 more
bits for the instructions darn (Deliver a Random Number) and scv (System
Call Vectored).
Linux commit ID 6997e57d693b07289694239e52a10d2f02c3a46f reserved
another bit for internal usage.
* sysdeps/powerpc/bits/hwcap.h: Add PPC_FEATURE2_DARN and
PPC_FEATURE2_SCV.
* sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_cap_flags): Add scv
and darn.
This patch adds _Float128 support to the ldbl-96 bits/iscanonical.h,
as needed for x86_64 / x86 / ia64 support of _Float128.
Tested for x86_64 (in conjunction with float128 patches).
* sysdeps/ieee754/ldbl-96/bits/iscanonical.h
[__HAVE_DISTINCT_FLOAT128] (__iscanonicalf128): New macro.
This patch makes math-tests.h, as used to describe support of given
floating-point types for sNaNs, rounding modes and exceptions, handle
distinguishing _Float128 from long double. This is needed for x86_64,
where if building with GCC 6 or earlier there is no __builtin_nansq,
so no way to get a signaling NaN of _Float128 type, so associated
tests cannot be run (although glibc itself works fine, as there is
never any need to create such an sNaN with a built-in function inside
glibc).
Tested for x86_64 (in conjunction with float128 patches).
* sysdeps/generic/math-tests.h: Include <bits/floatn.h>.
(MATH_TESTS_TG): New macro.
(SNAN_TESTS_float128): Likewise.
(ROUNDING_TESTS_float128): Likewise.
(EXCEPTION_TESTS_float128): Likewise.
(SNAN_TESTS): Define using MATH_TESTS_TG.
(ROUNDING_TESTS): Likewise.
(EXCEPTION_TESTS): Likewise.
As with other long double identifiers, float128_private.h has a
redefinition of SET_RESTORE_ROUNDL. However, that redefinition is
broken, since this is a macro with one argument being defined to take
no arguments. This patch fixes the redefinition. (x86_64 needs the
redefinition because SET_RESTORE_ROUNDL only changes the x87 rounding
mode, whereas _Float128 arithmetic uses the SSE rounding mode instead
on x86_64.)
Tested for x86_64 (in conjunction with float128 patches).
* sysdeps/ieee754/float128/float128_private.h
[SET_RESTORE_ROUNDF128] (SET_RESTORE_ROUNDL): Take an argument and
pass it to SET_RESTORE_ROUNDF128.
float128_private.h redefines ieee754.h identifiers ieee854_long_double
and IEEE854_LONG_DOUBLE_BIAS to map them to identifiers from
ieee754_float128.h.
This causes problems when ieee754.h is included after
float128_private.h and it's a version of ieee754.h that also defines
those identifiers; specifically, sysdeps/ieee754/ieee754.h, which
defines those identifiers for the x86 extended format. This patch
fixes this by ensuring an include of ieee754.h from float128_private.h
before the redefinitions.
Tested for x86_64 (in conjunction with float128 patches).
* sysdeps/ieee754/float128/float128_private.h: Include
<ieee754.h>.
The math_private.h macro min_of_type has broken _Float128 handling:
instead of passing its type argument to the key __EXPR_FLT128 macro,
it passes x, which is not a macro argument but whatever variable
called x happens to be visible in the calling function. If that
variable has the wrong type, the wrong one of long double and
_Float128 can get chosen. In particular, this applies to some
_Complex long double functions (where x happens to have type _Complex
long double, resulting in min_of_type returning a _Float128 value when
it should return a long double value). For some reason, this only
caused test failures for me on x86_64 with GCC 6 but not GCC 7 (I
suspect it triggers known bugs in conversions from x86 long double to
_Float128 that are present in GCC 6's soft-fp).
Tested for x86_64 (in conjunction with float128 patches).
* sysdeps/generic/math_private.h (__EXPR_FLT128): Do not apply
typeof to argument passed to __builtin_types_compatible_p.
(min_of_type): Pass type argument, not x, to __EXPR_FLT128.
Three float128 files still include xlocale.h after it was removed. I
don't know why this didn't cause problems for powerpc64le float128
testing; it did cause problems for my x86_64 float128 testing. This
patch changes the includes to use bits/types/locale_t.h.
Tested for x86_64 (in conjunction with float128 patches).
* sysdeps/ieee754/float128/strtof128_l.c: Include
<bits/types/locale_t.h> instead of <xlocale.h>.
* sysdeps/ieee754/float128/wcstof128.c: Likewise.
* sysdeps/ieee754/float128/wcstof128_l.c: Likewise.
Implement strcmp family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for strcmp family functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strcmp-sse2, strcmp-sse4_2, strncmp-sse2, strncmp-sse4_2,
strcasecmp_l-sse2, strcasecmp_l-sse4_2, strcasecmp_l-avx,
strncase_l-sse2, strncase_l-sse4_2 and strncase_l-avx.
* sysdeps/x86_64/multiarch/ifunc-strcasecmp.h: New file.
* sysdeps/x86_64/multiarch/strcasecmp.c: Likewise.
* sysdeps/x86_64/multiarch/strcasecmp_l-avx.S: Likewise.
* sysdeps/x86_64/multiarch/strcasecmp_l-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strcasecmp_l-sse4_2.S: Likewise.
* sysdeps/x86_64/multiarch/strcasecmp_l.c: Likewise.
* sysdeps/x86_64/multiarch/strcmp-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strcmp-sse4_2.S: Likewise.
* sysdeps/x86_64/multiarch/strcmp.c: Likewise.
* sysdeps/x86_64/multiarch/strncase.c: Likewise.
* sysdeps/x86_64/multiarch/strncase_l-avx.S : Likewise.
* sysdeps/x86_64/multiarch/strncase_l-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strncase_l-sse4_2.S: Likewise.
* sysdeps/x86_64/multiarch/strncase_l.c: Likewise.
* sysdeps/x86_64/multiarch/strncmp-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strncmp-sse4_2.S: Likewise.
* sysdeps/x86_64/multiarch/strncmp.c: Likewise.
* sysdeps/x86_64/multiarch/strcasecmp_l.S: Removed.
* sysdeps/x86_64/multiarch/strcmp.S: Likewise.
* sysdeps/x86_64/multiarch/strncase_l.S: Likewise.
* sysdeps/x86_64/multiarch/strncmp.S: Likewise.
* sysdeps/x86_64/multiarch/strcmp-sse42.S: Include <sysdep.h>.
(STRCMP_SSE42): New. Defined to __strcmp_sse42 if not defined.
[USE_AS_STRCASECMP_L || USE_AS_STRNCASECMP_L]: Include
"locale-defines.h".
(UPDATE_STRNCMP_COUNTER): New.
(SECTION): Likewise.
(GLABEL): Likewise.
(LABEL): Likewise.
* sysdeps/x86_64/multiarch/strncmp-ssse3.S: Rewrite and enable
for libc.a.
As shown by conform/ tests once the remaining namespace issues are
fixed, the tile bits/sigaction.h fails to declare SA_RESETHAND,
SA_RESTART and SA_NODEFER for non-XSI POSIX.1:2008 as other versions
do. Those constants were moved from XSI to Base in the 2008 edition
of POSIX. This patch fixes the conditions to match other versions of
this header.
Tested (compilation only) for tilegx-linux-gnu with
build-many-glibcs.py.
[BZ #21622]
* sysdeps/unix/sysv/linux/tile/bits/sigaction.h (SA_RESTART):
Define for [__USE_UNIX98 || __USE_XOPEN2K8], not [__USE_UNIX98 ||
__USE_MISC].
(SA_NODEFER): Likewise.
(SA_RESETHAND): Likewise.
Rename glibc.tune.ifunc to glibc.tune.hwcaps and move it to
sysdeps/x86/dl-tunables.list since it is x86 specicifc. Also
change type of data_cache_size, data_cache_size and
non_temporal_threshold to unsigned long int to match size_t.
Remove usage DEFAULT_STRLEN from cpu-tunables.c.
* elf/dl-tunables.list (glibc.tune.ifunc): Removed.
* sysdeps/x86/dl-tunables.list (glibc.tune.hwcaps): New.
Remove security_level on all fields.
* manual/tunables.texi: Replace ifunc with hwcaps.
* sysdeps/x86/cpu-features.c (TUNABLE_CALLBACK (set_ifunc)):
Renamed to ..
(TUNABLE_CALLBACK (set_hwcaps)): This.
(init_cpu_features): Updated.
* sysdeps/x86/cpu-features.h (cpu_features): Change type of
data_cache_size, data_cache_size and non_temporal_threshold to
unsigned long int.
* sysdeps/x86/cpu-tunables.c (DEFAULT_STRLEN): Removed.
(TUNABLE_CALLBACK (set_ifunc)): Renamed to ...
(TUNABLE_CALLBACK (set_hwcaps)): This. Update comments. Don't
use DEFAULT_STRLEN.
Backtrace through _dl_tlsdesc_resolve_rela was broken because the offset
of x30 from cfa was not in the debug info.
Add enough annotation so backtracing from the dynamic linker through
tlsdesc entry points works and the debugger shows registers correctly.
Many of the things defined by bits/signum.h are invariant across all
supported operating systems. This patch factors out all of them to a
new header bits/signum-generic.h, which each bits/signum.h will include
and then override whichever things need adjustment. Normally that will
mean, at most, adding or changing a few signal numbers.
A user-visible side effect is that the obsolete signal constant SIGUNUSED
(which is an alias for SIGSYS on all platforms that define it) is no
longer exposed by any version of bits/signum.h.
A side effect only relevant to glibc hackers is that _NSIG is now defined
in terms of __SIGRTMAX, instead of the other way around. This is because
__SIGRTMAX varies from platform to platform, but _NSIG==__SIGRTMAX+1 is
true universally. If your platform doesn't support realtime signals,
leave __SIGRTMAX equal to __SIGRTMIN.
I also added a Linux-specific test to make sure that our signal constants
match the ones in <asm/signal.h>, since we can't use that header (it's
not even vaguely namespace-clean).
* bits/signum-generic.h: Renamed from bits/signum.h.
Add proper multiple include guard and misuse check.
Define __SIGRTMIN = __SIGRTMAX = 32, and define _NSIG = __SIGRTMAX+1.
Move definition of SIGIO to "archaic names for compatibility" section.
* bits/signum.h: New file which just includes bits/signum-generic.h.
* sysdeps/unix/bsd/bits/signum.h
* sysdeps/unix/sysv/linux/bits/signum.h
* sysdeps/unix/sysv/linux/alpha/bits/signum.h
* sysdeps/unix/sysv/linux/hppa/bits/signum.h
* sysdeps/unix/sysv/linux/mips/bits/signum.h
* sysdeps/unix/sysv/linux/sparc/bits/signum.h
Just include <bits/signum-generic.h> and then add or adjust
signal constants. Do not define SIGUNUSED, SIGRTMIN, or SIGRTMAX.
* signal/Makefile: Install bits/signum-generic.h.
* signal/signal.h: Define SIGRTMIN and SIGRTMAX here.
* sysdeps/generic/siglist.h: SIGSYS and SIGWINCH are
universal. Prefer SIGPOLL to SIGIO. Simplify #ifdeffage.
* sysdeps/unix/sysv/linux/tst-signal-numbers.sh: New test.
* sysdeps/unix/sysv/linux/Makefile: Run it.
<locale.h> is specified to define locale_t in POSIX.1-2008, and so are
all of the headers that define functions that take locale_t arguments.
Under _GNU_SOURCE, the additional headers that define such functions
have also always defined locale_t. Therefore, there is no need to use
__locale_t in public function prototypes, nor in any internal code.
* ctype/ctype-c99_l.c, ctype/ctype.h, ctype/ctype_l.c
* include/monetary.h, include/stdlib.h, include/time.h
* include/wchar.h, locale/duplocale.c, locale/freelocale.c
* locale/global-locale.c, locale/langinfo.h, locale/locale.h
* locale/localeinfo.h, locale/newlocale.c
* locale/nl_langinfo_l.c, locale/uselocale.c
* localedata/bug-usesetlocale.c, localedata/tst-xlocale2.c
* stdio-common/vfscanf.c, stdlib/monetary.h, stdlib/stdlib.h
* stdlib/strfmon_l.c, stdlib/strtod_l.c, stdlib/strtof_l.c
* stdlib/strtol.c, stdlib/strtol_l.c, stdlib/strtold_l.c
* stdlib/strtoll_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
* string/strcasecmp.c, string/strcoll_l.c, string/string.h
* string/strings.h, string/strncase.c, string/strxfrm_l.c
* sysdeps/ieee754/float128/strtof128_l.c
* sysdeps/ieee754/float128/wcstof128.c
* sysdeps/ieee754/float128/wcstof128_l.c
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c
* sysdeps/powerpc/powerpc32/power7/strcasecmp.S
* sysdeps/powerpc/powerpc64/power7/strcasecmp.S
* sysdeps/x86_64/strcasecmp_l-nonascii.c
* sysdeps/x86_64/strncase_l-nonascii.c, time/strftime_l.c
* time/strptime_l.c, time/time.h, wcsmbs/mbsrtowcs_l.c
* wcsmbs/wchar.h, wcsmbs/wcscasecmp.c, wcsmbs/wcsncase.c
* wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
* wcsmbs/wcstof_l.c, wcsmbs/wcstol_l.c, wcsmbs/wcstold.c
* wcsmbs/wcstold_l.c, wcsmbs/wcstoll_l.c, wcsmbs/wcstoul_l.c
* wcsmbs/wcstoull_l.c, wctype/iswctype_l.c
* wctype/towctrans_l.c, wctype/wcfuncs_l.c
* wctype/wctrans_l.c, wctype/wctype.h, wctype/wctype_l.c:
Change all uses of __locale_t to locale_t.
xlocale.h is already a single-type micro-header, defining struct
__locale_struct and the typedefs __locale_t and locale_t. This patch
brings it into the bits/types/ scheme: there are now
bits/types/__locale_t.h which defines only __locale_struct and
__locale_t, and bits/types/locale_t.h which defines locale_t as well
as the other two. None of *our* headers need __locale_t.h, but it
appears to me that libstdc++ could make use of it.
There are a lot of external uses of xlocale.h, but all the uses I
checked had an autoconf test or equivalent for its existence. It has
never been available from other C libraries, and it has always
contained a comment reading "This file is not standardized, don't rely
on it, it can go away without warning" so I think dropping it is
pretty safe.
I also took the opportunity to clean up comments in various public
header files that still talk about the *_l interfaces as though they
were completely nonstandard. There are a few of them, notably the
strtoX_l and wcstoX_l families, that haven't been standardized, but
the bulk are in POSIX.1-2008.
* locale/xlocale.h: Rename to...
* locale/bits/types/__locale_t.h: ...here. Adjust commentary.
Only define struct __locale_struct and __locale_t, not locale_t.
* locale/bits/types/locale_t.h: New file; define locale_t here.
* locale/Makefile (headers): Update to match.
* include/xlocale.h: Delete wrapper.
* include/bits/types/__locale_t.h: New wrapper.
* include/bits/types/locale_t.h: New wrapper.
* ctype/ctype.h, include/printf.h, include/time.h
* locale/langinfo.h, locale/locale.h, stdlib/monetary.h
* stdlib/stdlib.h, string/string.h, string/strings.h, time/time.h
* wcsmbs/wchar.h, wctype/wctype.h: Use bits/types/locale_t.h.
Correct outdated comments regarding the standardization status of
the functions that take locale_t arguments.
* stdlib/strtod_l.c, stdlib/strtof_l.c, stdlib/strtol_l.c
* stdlib/strtold_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
* wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
* wcsmbs/wcstof_l.c, wcsmbs/wcstold.c, wcsmbs/wcstold_l.c:
Don't include xlocale.h. If necessary, include locale.h instead.
* stdlib/strtold_l.c: Unconditionally include wchar.h.
This patch consolidates the open Linux syscall implementation on
sysdeps/unix/sysv/linux/open{64}.c. The changes are:
1. Remove wordsize-64 openat{64}.
2. For architetures that define __OFF_T_MATCHES_OFF64_T openat64
will be default one with alias to required symbols. Otherwise
openat64 will pass the required O_LARGEFILE flag on syscall.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/openat.c (__libc_openat): Build only
for !__OFF_T_MATCHES_OFF64_T.
* sysdeps/unix/sysv/linux/openat64.c (__libc_openat64): New
implementation based on open64.
* sysdeps/unix/sysv/linux/wordsize-64/openat.c: Remove file.
* sysdeps/unix/sysv/linux/wordsize-64/openat64.c: Likewise.
This patch XFAILs one test where the powerpc32 ucontext_t has the
wrong type of a field, to allow the conform/ tests as a whole to pass
once the namespace issues are fixed.
Tested with build-many-glibcs.py.
[BZ #21635]
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = conform] (conformtest-xfail-conds): New variable.
* conform/data/signal.h-data (uc_mcontext): XFAIL for
powerpc32-linux.
* conform/data/ucontext.h-data (uc_mcontext): Likewise.
This patch XFAILs one test where the ia64 ucontext_t has the wrong
type of a field, to allow the conform/ tests as a whole to pass once
the namespace issues are fixed.
Tested with build-many-glibcs.py.
[BZ #21634]
* sysdeps/unix/sysv/linux/ia64/Makefile [$(subdir) = conform]
(conformtest-xfail-conds): New variable.
* conform/data/signal.h-data (uc_sigmask): XFAIL for ia64-linux.
* conform/data/ucontext.h-data (uc_sigmask): Likewise.
The current IFUNC selection is based on microbenchmarks in glibc. It
should give the best performance for most workloads. But other choices
may have better performance for a particular workload or on the hardware
which wasn't available at the selection was made. The environment
variable, GLIBC_TUNABLES=glibc.tune.ifunc=-xxx,yyy,-zzz...., can be used
to enable CPU/ARCH feature yyy, disable CPU/ARCH feature yyy and zzz,
where the feature name is case-sensitive and has to match the ones in
cpu-features.h. It can be used by glibc developers to override the
IFUNC selection to tune for a new processor or improve performance for
a particular workload. It isn't intended for normal end users.
NOTE: the IFUNC selection may change over time. Please check all
multiarch implementations when experimenting.
Also, GLIBC_TUNABLES=glibc.tune.x86_non_temporal_threshold=NUMBER is
provided to set threshold to use non temporal store to NUMBER,
GLIBC_TUNABLES=glibc.tune.x86_data_cache_size=NUMBER to set data cache
size, GLIBC_TUNABLES=glibc.tune.x86_shared_cache_size=NUMBER to set
shared cache size.
* elf/dl-tunables.list (tune): Add ifunc,
x86_non_temporal_threshold,
x86_data_cache_size and x86_shared_cache_size.
* manual/tunables.texi: Document glibc.tune.ifunc,
glibc.tune.x86_data_cache_size, glibc.tune.x86_shared_cache_size
and glibc.tune.x86_non_temporal_threshold.
* sysdeps/unix/sysv/linux/x86/dl-sysdep.c: New file.
* sysdeps/x86/cpu-tunables.c: Likewise.
* sysdeps/x86/cacheinfo.c
(init_cacheinfo): Check and get data cache size, shared cache
size and non temporal threshold from cpu_features.
* sysdeps/x86/cpu-features.c [HAVE_TUNABLES] (TUNABLE_NAMESPACE):
New.
[HAVE_TUNABLES] Include <unistd.h>.
[HAVE_TUNABLES] Include <elf/dl-tunables.h>.
[HAVE_TUNABLES] (TUNABLE_CALLBACK (set_ifunc)): Likewise.
[HAVE_TUNABLES] (init_cpu_features): Use TUNABLE_GET to set
IFUNC selection, data cache size, shared cache size and non
temporal threshold.
* sysdeps/x86/cpu-features.h (cpu_features): Add data_cache_size,
shared_cache_size and non_temporal_threshold.
Remove one more string inline that was defined directly in string.h;
in the absence of the rest of the inlines, it broke the build.
Like other ifunc shims for these functions,
x86_64/multiarch/{mem,st}pcpy.c need to define __NO_STRING_INLINES and
NO_MEMPCPY_STPCPY_REDIRECT.
* string/string.h (__mempcpy_inline): Delete.
* sysdeps/x86_64/multiarch/mempcpy.c
* sysdeps/x86_64/multiarch/stpcpy.c:
Define NO_MEMPCPY_STPCPY_REDIRECT and __NO_STRING_INLINES
before including string.h.
These machine-dependent inline string functions have never been on by
default, and even if they were a good idea at the time they were
introduced, they haven't really been touched in ten to fifteen years
and probably aren't a good idea on current-gen processors. Current
thinking is that this class of optimization is best left to the
compiler.
* bits/string.h, string/bits/string.h
* sysdeps/aarch64/bits/string.h
* sysdeps/m68k/m680x0/m68020/bits/string.h
* sysdeps/s390/bits/string.h, sysdeps/sparc/bits/string.h
* sysdeps/x86/bits/string.h: Delete file.
* string/string.h: Don't include bits/string.h.
* string/bits/string3.h: Rename to bits/string_fortified.h.
No need to undef various symbols that the removed headers
might have defined as macros.
* string/Makefile (headers): Remove bits/string.h, change
bits/string3.h to bits/string_fortified.h.
* string/string-inlines.c: Update commentary. Remove definitions
of various macros that nothing looks at anymore. Don't directly
include bits/string.h. Set _STRING_INLINE_unaligned here, based on
compiler-predefined macros.
* string/strncat.c: If STRNCAT is not defined, or STRNCAT_PRIMARY
_is_ defined, provide internal hidden alias __strncat.
* include/string.h: Declare internal hidden alias __strncat.
Only forward __stpcpy to __builtin_stpcpy if __NO_STRING_INLINES is
not defined.
* include/bits/string3.h: Rename to bits/string_fortified.h,
update to match above.
* sysdeps/i386/string-inlines.c: Define compat symbols for
everything formerly defined by sysdeps/x86/bits/string.h.
Make existing definitions into compat symbols as well.
Remove some no-longer-necessary messing around with macros.
* sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c
* sysdeps/powerpc/powerpc64/multiarch/mempcpy.c
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
* sysdeps/s390/multiarch/mempcpy.c
No need to define _HAVE_STRING_ARCH_mempcpy.
Do define __NO_STRING_INLINES and NO_MEMPCPY_STPCPY_REDIRECT.
* sysdeps/i386/i686/multiarch/strncat-c.c
* sysdeps/s390/multiarch/strncat-c.c
* sysdeps/x86_64/multiarch/strncat-c.c
Define STRNCAT_PRIMARY. Don't change definition of libc_hidden_def.
This patch removes some MIPS code in glibc that was conditional on old
GCC versions no longer supported for building glibc.
Tested with build-many-glibcs.py.
* sysdeps/mips/atomic-machine.h (R10K_BEQZ_INSN): Remove.
[__GNUC_PREREQ (4, 8) || __mips16]: Make code unconditional.
[!__GNUC_PREREQ (4, 8) && !__mips16]: Remove conditional code.
* sysdeps/mips/math-tests.h
[_MIPS_SIM != _ABIO32 && !__GNUC_PREREQ (4, 9)]: Remove
conditional code.
This patch removes PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS
and PTRACE_SETFPREGS as these requests does not exist on s390 kernel.
But the kernel has support for PTRACE_SINGLEBLOCK,
PTRACE_SECCOMP_GET_FILTER, PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA,
PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE and
PTRACE_TE_ABORT_RAND. Thus those are defined now.
The current kernel s390 specific ptrace.h file also defines
PTRACE_PEEKTEXT_AREA, PTRACE_PEEKDATA_AREA, PTRACE_POKETEXT_AREA,
PTRACE_POKEDATA_AREA, PTRACE_PEEK_SYSTEM_CALL, PTRACE_POKE_SYSTEM_CALL
and PTRACE_PROT, but those requests are not supported.
Thus those defines are skipped in glibc ptrace.h.
There were old includes of ptrace.h in sysdeps/s390/fpu/fesetenv.c.
The ptrace feature isn't used there anymore, thus I removed the includes.
Before this patch, <glibc>/sysdeps/unix/sysv/linux/s390/sys/ptrace.h
uses ptrace-request 12 for PTRACE_GETREGS,
but <kernel>/include/uapi/linux/ptrace.h uses 12 for PTRACE_SINGLEBLOCK.
The s390 kernel has never had support for PTRACE_GETREGS!
Thus glibc ptrace.h is adjusted to match kernel ptrace.h.
The new s390 specific test ensures, that PTRACE_SINGLEBLOCK defined
in glibc works as expected. If the kernel would interpret it as
PTRACE_GETREGS, then the testcase will not make any progress
and will time out.
ChangeLog:
[BZ #21539]
* NEWS: Mention s390 ptrace request changes.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h
(PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS,
PTRACE_SETFPREGS): Remove enum constant.
(PT_GETREGS, PT_SETREGS, PT_GETFPREGS, T_SETFPREGS):
Remove defines.
(PTRACE_SINGLEBLOCK): New enum constant.
(PT_STEPBLOCK): New define.
(PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA,
PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE,
PTRACE_TE_ABORT_RAND): New enum constant and define.
* sysdeps/s390/fpu/fesetenv.c: Remove ptrace.h includes.
* sysdeps/unix/sysv/linux/s390/tst-ptrace-singleblock.c:
New file.
* sysdeps/unix/sysv/linux/s390/Makefile: Add test.
This patch fixes a namespace issue for one more field in the x86
sys/ucontext.h that I missed in my previous changes.
Tested for x86_64.
[BZ #21457]
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h [__x86_64__] (struct
_libc_xmmreg): Use __ctx in defining field.
Some older standards (XPG4.2 through POSIX.1:2001, XSI only) require
sys/wait.h to include the definition of struct rusage. This is
missing in glibc.
This patch adds the required definition. struct rusage is moved to a
new header bits/types/struct_rusage.h to avoid bringing in the whole
of sys/resource.h (although the standards in question do allow the
whole of sys/resource.h to be brought in). In the five
bits/resource.h headers, the only variation between the definitions of
struct rusage is that the sysdeps/unix/sysv/linux version is prepared
for x32 (by having anonymous unions with __syscall_slong_t fields) and
the others are not. Thus, this version is suitable for use
generically (everything other than x32 simply has __syscall_slong_t
the same as long int, so there are no API or ABI changes involved, and
anonymous unions are already a required language feature for glibc
headers elsewhere), and this patch uses it as a base for the single
implementation of bits/types/struct_rusage.h.
Tested for x86_64, and with build-many-glibcs.py.
[BZ #21575]
* resource/bits/types/struct_rusage.h: New file.
* include/bits/types/struct_rusage.h: Likewise.
* bits/resource.h (struct rusage): Include
<bits/types/struct_rusage.h> instead of defining here.
* sysdeps/unix/sysv/linux/bits/resource.h (struct rusage):
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/resource.h (struct rusage):
Likewise.
* sysdeps/unix/sysv/linux/mips/bits/resource.h (struct rusage):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/resource.h (struct rusage):
Likewise.
* resource/Makefile (headers): Add bits/types/struct_rusage.h.
* posix/sys/wait.h [__USE_XOPEN_EXTENDED && !__USE_XOPEN2K8]:
Include <bits/types/struct_rusage.h>
Building glibc with gcc configured with --enable-default-pie failed on s390
due to assembler messages:
../sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S:44:
Error: junk at end of line, first unrecognized character is `@'
HIDDEN_JUMPTARGET was expanded to exit@PLT@GOTOFF.
If SHARED is not defined, HIDDEN_JUMPTARGET is defined to JUMPTARGET
in sysdeps/s390/s390-32/sysdep.h. There it expanded to exit@PLT
in non SHARED case as PIC is defined if gcc is configured with
--enable-default-pie. Thus I've changed the "ifdef PIC" to "ifdef SHARED"
as we do not want PLTs in the static obj files. I've also changed this
in sysdeps/s390/s390-64/sysdep.h.
I've also adjusted sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S.
If glibc is configured with --disable-hidden-plt, then NO_HIDDEN is defined.
In SHARED case HIDDEN_JUMPTARGET would be expanded to exit@PLT@GOTOFF
instead of __GI_exit@GOTOFF.
Now we jump to:
- __GI_exit if SHARED is defined
- exit@PLT if SHARED and NO_HIDDEN is defined
- exit if both are not defined.
On s390 31bit we have to setup GOT pointer in r12 if we use a PLT stub.
Therefore I use SYSCALL_PIC_SETUP from sysdep.h and added the missing semicolons.
ChangeLog:
[BZ #21537]
* sysdeps/s390/s390-32/sysdep.h (JUMPTARGET, SYSCALL_PIC_SETUP):
Check SHARED instead of PIC.
(SYSCALL_PIC_SETUP): Add missing semicolons.
* sysdeps/s390/s390-64/sysdep.h (JUMPTARGET, SYSCALL_PIC_SETUP):
Check SHARED instead of PIC.
* sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S
(__makecontext_ret): Adjust code to jump to exit.
Since kernel 2.6.0 all Linux version accept the system call number
in register 1 for svc 0. There is no need to have special handling
that uses EX for system calls < 256. This will simplify and speed
up that code.
A microbenchmark doing "syscall(__NR_getpid);" in a loops gets faster
by ~12%.
* sysdeps/unix/sysv/linux/s390/s390-32/syscall.S: Simplify
code by always using SVC 0 instead of EX.
* sysdeps/unix/sysv/linux/s390/s390-64/syscall.S: Likewise.
This patch consolidates Linux sync_file_range at default
sysdeps/unix/sysv/linux/sync_file_range.c implementation. It also
moves the rules flags from generic io/Makefile to Linux one due the
fact it is a Linux-only symbol.
Checked on i686-linux-gnu and x86_64-linux-gnu.
* io/Makefile (CFLAGS-sync_file_range.c): Remove rule.
* sysdeps/unix/sysv/linux/Makefile (CFLAGS-sync_file_range.c): New
rule.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Remove
sync_file_range.
Implement strcspn/strpbrk/strspn IFUNC selectors in C
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for strcspn/strpbrk/strspn functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strcspn-sse2, strpbrk-sse2 and strspn-sse2.
* sysdeps/x86_64/strcspn.S (STRPBRK_P): Removed.
Check USE_AS_STRPBRK instead of STRPBRK_P.
* sysdeps/x86_64/strpbrk.S (USE_AS_STRPBRK): New.
* sysdeps/x86_64/multiarch/ifunc-sse4_2.h: New file.
* sysdeps/x86_64/multiarch/strcspn-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strcspn.c: Likewise.
* sysdeps/x86_64/multiarch/strpbrk-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strpbrk.c: Likewise.
* sysdeps/x86_64/multiarch/strspn-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strspn.c: Likewise.
* sysdeps/x86_64/multiarch/strcspn.S: Removed.
* sysdeps/x86_64/multiarch/strpbrk.S: Likewise.
* sysdeps/x86_64/multiarch/strspn.S: Likewise.
* sysdeps/x86_64/multiarch/strpbrk-c.c: Remove "#ifdef SHARED"
and "#endif".
Implement strcat family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for strcat family functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strcat-sse2.
* sysdeps/x86_64/multiarch/strcat-sse2.S: New file.
* sysdeps/x86_64/multiarch/strcat.c: Likewise.
* sysdeps/x86_64/multiarch/strncat.c: Likewise.
* sysdeps/x86_64/multiarch/strcat.S: Removed.
* sysdeps/x86_64/multiarch/strncat.S: Likewise.
Implement memcmp family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for memcmp family functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memcmp-sse2.
* sysdeps/x86_64/multiarch/ifunc-memcmp.h: New file.
* sysdeps/x86_64/multiarch/memcmp-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/memcmp.c: Likewise.
* sysdeps/x86_64/multiarch/wmemcmp.c: Likewise.
* sysdeps/x86_64/multiarch/memcmp.S: Removed.
* sysdeps/x86_64/multiarch/wmemcmp.S: Likewise.
Implement memset family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for memset functions within libc.
2017-06-07 H.J. Lu <hongjiu.lu@intel.com>
Erich Elsen <eriche@google.com>
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memset-sse2-unaligned-erms, and memset_chk-nonshared.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add test for __memset_chk_erms.
Update comments.
* sysdeps/x86_64/multiarch/ifunc-memset.h: New file.
* sysdeps/x86_64/multiarch/memset-sse2-unaligned-erms.S: Likewise.
* sysdeps/x86_64/multiarch/memset.c: Likewise.
* sysdeps/x86_64/multiarch/memset_chk-nonshared.S: Likewise.
* sysdeps/x86_64/multiarch/memset_chk.c: Likewise.
* sysdeps/x86_64/multiarch/memset.S: Removed.
* sysdeps/x86_64/multiarch/memset_chk.S: Likewise.
* sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S
(__memset_chk_erms): New function.
Implement memmove family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for memmove family functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memmove-sse2-unaligned-erms, memcpy_chk-nonshared,
mempcpy_chk-nonshared and memmove_chk-nonshared.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __memmove_chk_erms,
__memcpy_chk_erms and __mempcpy_chk_erms. Update comments.
* sysdeps/x86_64/multiarch/ifunc-memmove.h: New file.
* sysdeps/x86_64/multiarch/memcpy.c: Likewise.
* sysdeps/x86_64/multiarch/memcpy_chk-nonshared.S: Likewise.
* sysdeps/x86_64/multiarch/memcpy_chk.c: Likewise.
* sysdeps/x86_64/multiarch/memmove-sse2-unaligned-erms.S: Likewise.
* sysdeps/x86_64/multiarch/memmove.c: Likewise.
* sysdeps/x86_64/multiarch/memmove_chk-nonshared.S: Likewise.
* sysdeps/x86_64/multiarch/memmove_chk.c: Likewise.
* sysdeps/x86_64/multiarch/mempcpy.c: Likewise.
* sysdeps/x86_64/multiarch/mempcpy_chk-nonshared.S: Likewise.
* sysdeps/x86_64/multiarch/mempcpy_chk.c: Likewise.
* sysdeps/x86_64/multiarch/memcpy.S: Removed.
* sysdeps/x86_64/multiarch/memcpy_chk.S: Likewise.
* sysdeps/x86_64/multiarch/memmove.S: Likewise.
* sysdeps/x86_64/multiarch/memmove_chk.S: Likewise.
* sysdeps/x86_64/multiarch/mempcpy.S: Likewise.
* sysdeps/x86_64/multiarch/mempcpy_chk.S: Likewise.
* sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
(__mempcpy_chk_erms): New function.
(__memmove_chk_erms): Likewise.
(__memcpy_chk_erms): New alias.
Since commit d957c4d3fa (i386: Compile
rtld-*.os with -mno-sse -mno-mmx -mfpmath=387), vector intrinsics can
no longer be used in ld.so, even if the compiled code never makes it
into the final ld.so link. This commit adds the missing IS_IN (libc)
guard to the SSE 4.2 strcspn implementation, so that it can be used from
ld.so in the future.
This is fairly complicated, not because the users of __need_Emath and
__need_error_t have complicated requirements, but because the core
changes had a lot of fallout.
__need_error_t exists for gnulib compatibility in argz.h and argp.h.
error_t itself is a Hurdism, an enum containing all the E-constants,
so you can do 'p (error_t) errno' in gdb and get a symbolic value.
argz.h and argp.h use it for function return values, and they want to
fall back to 'int' when that's not available. There is no reason why
these nonstandard headers cannot just go ahead and include all of
errno.h; so we do that.
__need_Emath is defined only by .S files; what they _really_ need is
for errno.h to avoid declaring anything other than the E-constants
(e.g. 'extern int __errno_location(void);' is a syntax error in
assembly language). This is replaced with a check for __ASSEMBLER__ in
errno.h, plus a carefully documented requirement for bits/errno.h not
to define anything other than macros. That in turn has the
consequence that bits/errno.h must not define errno - fortunately, all
live ports use the same definition of errno, so I've moved it to
errno.h. The Hurd bits/errno.h must also take care not to define
error_t when __ASSEMBLER__ is defined, which involves repeating all of
the definitions twice, but it's a generated file so that's okay.
* stdlib/errno.h: Remove __need_Emath and __need_error_t logic.
Reorganize file. Declare errno here. When __ASSEMBLER__ is
defined, don't declare anything other than the E-constants.
* include/errno.h: Change conditional for exposing internal
declarations to (not _ISOMAC and not __ASSEMBLER__).
* bits/errno.h: Remove logic for __need_Emath. Document
requirements for a port-specific bits/errno.h.
* sysdeps/unix/sysv/linux/bits/errno.h
* sysdeps/unix/sysv/linux/alpha/bits/errno.h
* sysdeps/unix/sysv/linux/hppa/bits/errno.h
* sysdeps/unix/sysv/linux/mips/bits/errno.h
* sysdeps/unix/sysv/linux/sparc/bits/errno.h:
Add multiple-include guard and check against improper inclusion.
Remove __need_Emath logic. Don't declare errno here. Ensure all
constants are defined as simple integer literals. Consistent
formatting.
* sysdeps/mach/hurd/errnos.awk: Likewise. Only define error_t and
enum __error_t_codes if __ASSEMBLER__ is not defined.
* sysdeps/mach/hurd/bits/errno.h: Regenerate.
* argp/argp.h, string/argz.h: Don't define __need_error_t before
including errno.h.
* sysdeps/i386/i686/fpu/multiarch/s_cosf-sse2.S
* sysdeps/i386/i686/fpu/multiarch/s_sincosf-sse2.S
* sysdeps/i386/i686/fpu/multiarch/s_sinf-sse2.S
* sysdeps/x86_64/fpu/s_cosf.S
* sysdeps/x86_64/fpu/s_sincosf.S
* sysdeps/x86_64/fpu/s_sinf.S:
Just include errno.h; don't define __need_Emath or include
bits/errno.h directly.
__need_FOPEN_MAX wasn't being used anywhere. __need_IOV_MAX was more
complicated; the basic deal is that sys/uio.h wants to define a
constant named UIO_MAXIOV and bits/xopen_lim.h wants to define a
constant named IOV_MAX, with the same meaning. For no apparent reason
this was being handled via bits/stdio_lim.h -- stdio.h is NOT supposed
to define IOV_MAX -- and some mess in Makerules. Also, bits/uio.h on
Linux was being used as a dumping ground for extension functions.
So now we have bits/uio_lim.h, which defines __IOV_MAX.
bits/xopen_lim.h and sys/uio.h use that to define their respective
constants. We also now have bits/uio-ext.h, which is the official
Proper Home for extensions to sys/uio.h. bits/uio.h is removed, and
stdio_lim.h doesn't define IOV_MAX at all.
* bits/uio_lim.h, sysdeps/unix/sysv/linux/bits/uio_lim.h
* bits/uio-ext.h, sysdeps/unix/sysv/linux/bits/uio-ext.h: New file.
* bits/uio.h, sysdeps/unix/sysv/linux/bits/uio.h: Delete file.
* include/bits/xopen_lim.h: Use bits/uio_lim.h to get the value
for IOV_MAX.
* misc/Makefile: Install bits/uio-ext.h and bits/uio_lim.h.
Don't install bits/uio.h.
* misc/sys/uio.h: Don't include bits/uio.h. Do include
bits/types/struct_iovec.h and bits/uio_lim.h. Set UIO_MAXIOV
based on __IOV_MAX. Under __USE_GNU, also include bits/uio-ext.h.
* stdio-common/stdio_lim.h.in: Remove logic for __need_FOPEN_MAX
and __need_IOV_MAX. Don't define IOV_MAX at all.
* Makerules (stdio_lim.h): Remove logic for setting IOV_MAX.
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h:
Include bits/types/struct_iovec.h, not bits/uio.h.
Use __ssize_t, not ssize_t, in function prototypes.
Don't use hard TAB for double space after period in comments.
ELFv2 functions with localentry:0 are those with a single entry point,
ie. global entry == local entry, that have no requirement on r2 or
r12 and guarantee r2 is unchanged on return. Such an external
function can be called via the PLT without saving r2 or restoring it
on return, avoiding a common load-hit-store for small functions.
This patch implements the ld.so changes necessary for this
optimization. ld.so needs to check that an optimized plt call
sequence is in fact calling a function implemented with localentry:0,
end emit a fatal error otherwise.
The elf/testobj6.c change is to stop "error while loading shared
libraries: expected localentry:0 `preload'" when running
elf/preloadtest, which we'd get otherwise.
* elf/elf.h (PPC64_OPT_LOCALENTRY): Define.
* sysdeps/alpha/dl-machine.h (elf_machine_fixup_plt): Add
refsym and sym parameters. Adjust callers.
* sysdeps/aarch64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/generic/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/mips/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_fixup_plt):
Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.c (_dl_error_localentry): New.
(_dl_reloc_overflow): Increase buffser size. Formatting.
* sysdeps/powerpc/powerpc64/dl-machine.h (ppc64_local_entry_offset):
Delete reloc param, add refsym and sym. Check optimized plt
call stubs for localentry:0 functions. Adjust callers.
(elf_machine_fixup_plt, elf_machine_plt_conflict): Add refsym
and sym parameters. Adjust callers.
(_dl_reloc_overflow): Move attribute.
(_dl_error_localentry): Declare.
* elf/dl-runtime.c (_dl_fixup): Save original sym. Pass
refsym and sym to elf_machine_fixup_plt.
* elf/testobj6.c (preload): Call printf.
Makes __stpncpy_power8 call __memset_power8 directly rather than via an
IFUNC. Fixes a missing _mcount, and removes some redundant NOPS. The
*_is_local defines are also used in a followup patch.
* sysdeps/powerpc/powerpc64/multiarch/strncpy-power7.S: Define
MEMSET_is_local.
* sysdeps/powerpc/powerpc64/multiarch/strncpy-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpncpy-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpncpy-power8.S: Likewise.
Define MEMSET.
* sysdeps/powerpc/powerpc64/multiarch/strstr-power7.S: Define
STRLEN_is_local, STRNLEN_is_local, and STRCHR_is_local.
* sysdeps/powerpc/powerpc64/power7/strstr.S: Likewise. Don't add
nop after local calls.
* sysdeps/powerpc/powerpc64/power7/strncpy.S: Define MEMSET_is_local.
Don't add nop after local call.
* sysdeps/powerpc/powerpc64/power8/strncpy.S: Likewise. Add missing
CALL_MCOUNT.
.align on some targets takes a byte alignment, on others like powerpc,
log2 of the byte alignment. It's a good idea to avoid .align,
particularly since x86 and powerpc are different. This patch fixes
the occurrences of .align in powerpc64/sysdep.h, renames DOT_LABEL
since the macro doesn't have anything to do with adding dots, removes
extraneous semicolons, and fixes some formatting.
* sysdeps/powerpc/powerpc64/sysdep.h: Formatting.
(FUNC_LABEL): Rename from DOT_LABEL.
(ENTRY_1): Use FUNC_LABEL and remove leading space from label.
Use .p2align rather than .align.
(TRACEBACK, TRACEBACK_MASK): Use .p2align rather than .align.
(ABORT_TRANSACTION): Likewise.
(ENTRY_1, ENTRY_2, END_2, LOCALENTRY): Remove unnecessary semicolons,
particularly at end. Add semicolon at invocation as necessary.
(TRACEBACK, TRACEBACK_MASK, PSEUDO, PSEUDO_NOERRNO): Likewise.
(PSEUDO_ERRVAL, PPC64_LOAD_FUNCPTR, OPD_ENT): Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strrchr-power8.S (ENTRY,
END): Adjust to suit.
I think FRAME_PARM[1-9]_SAVE confuse the code, particularly
FRAME_PARM9_SAVE. There are only 8 parameter save slots!
* sysdeps/powerpc/powerpc64/sysdep.h: (FRAME_BACKCHAIN,
FRAME_CR_SAVE, FRAME_LR_SAVE): Move out of conditional.
(FRAME_PARM1_SAVE, FRAME_PARM2_SAVE, FRAME_PARM3_SAVE,
FRAME_PARM4_SAVE, FRAME_PARM5_SAVE, FRAME_PARM6_SAVE,
FRAME_PARM7_SAVE, FRAME_PARM8_SAVE, FRAME_PARM9_SAVE): Delete.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/makecontext.S: Replace
uses of FRAME_PARM[1-9]_SAVE with FRAME_PARM_SAVE plus offset.
The macros used in assembly were broken on powerpc64 ELFv1.
* sysdeps/powerpc/powerpc64/sysdep.h: (call_mcount_parm_offset): Delete.
(SAVE_ARG, REST_ARG, CFI_SAVE_ARG): Correct.
General purpose registers in mcontext_t structure
are 8 bytes long for both MIPS32/MIPS64.
get/set/make/swap context implementations for MIPS O32
incorrectly assume that general purpose registers
in this structure are 4 bytes long.
This patch is fixing that.
Tested for MIPS O32 LE and BE.
Compared objdump of modified functions for mips n32 and mips n64.
[BZ #21548]
* sysdeps/unix/sysv/linux/mips/getcontext.S: Define MCONTEXT_SZGREG as
8 and use it when copying general purpose registers.
* sysdeps/unix/sysv/linux/mips/makecontext.S: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/Makefile: Include new test for
mips o32.
* sysdeps/unix/sysv/linux/mips/mips32/bug-getcontext-mips-gp.c: Added
new test for mips o32.
* sysdeps/unix/sysv/linux/mips/setcontext.S: Define MCONTEXT_SZGREG as
8 and use it when copying general purpose registers.
* sysdeps/unix/sysv/linux/mips/swapcontext.S: Likewise.
bits/sched.h has logic to expose only an impl-namespace variant of
struct sched_param (i.e. struct __sched_param), but nothing uses it,
and the only header that includes bits/sched.h is sched.h. The
__need_schedparam logic can therefore be removed.
bits/sched.h also has a great deal of code relating to cpu_set_t
objects that was *almost* the same between the two versions of
bits/sched.h in the tree; a little spelunking indicated that this is
because some bug fixes got applied to the Linux-specific bits/sched.h
but not the generic one. Introduce a new header, bits/cpu-set.h,
containing the version of that code with the bugfixes, have sched.h
include it directly, and delete all of the code from both versions of
bits/sched.h.
Also remove the unnecessary name mangling in the definition of struct
sched_param -- POSIX specifies a field 'sched_priority', so there is
no reason to define it as '__sched_priority' and then paper over that
with a macro. (Just in case someone was using the internal name,
'sched_priority' remains a macro defined to expand to itself, and
'__sched_priority' now expands to 'sched_priority'.)
Finally, as long as I'm touching these files anyway, merge new
constants from linux/sched.h into the Linux bits/sched.h.
* bits/sched.h: Remove __need_schedparam logic and replace with a
normal multiple-include guard. Change field name in struct
sched_param from __sched_priority to sched_priority. Delete
everything under #ifndef __cpu_set_t_defined.
* sysdeps/unix/sysv/linux/bits/sched.h: Likewise. Also sync with
kernel sched.h, adding SCHED_ISO and SCHED_DEADLINE constants.
* posix/sched.h: Include bits/cpu-set.h as well as bits/sched.h.
For compatibility, #define sched_priority to itself, and #define
__sched_priority as sched_priority.
* posix/bits/cpu-set.h: New file containing, verbatim, the code
that was under #ifndef __cpu_set_t_defined in
sysdeps/unix/sysv/linux/bits/sched.h.
* include/bits/cpu-set.h: New wrapper.
* posix/Makefile: Install bits/cpu-set.h.
The implementations are contained with sysdeps/ieee754/float128 as
they are only built when _Float128 is enabled within libc/m.
* include/gmp.h (__mpn_construct_float128): New declaration.
* include/stdlib.h: Include bits/floatn.h for _Float128 tests.
(__strtof128_l): New declaration.
(__strtof128_nan): Likewise.
(__wcstof128_nan): Likewise.
(__strtof128_internal): Likewise.
(____strtof128_l_internal): Likewise.
* include/wchar.h: Include bits/floatn.h for _Float128 tests.
(__wcstof128_l): New declaration.
(__wcstof128_internal): Likewise.
* stdlib/Makefile (bug-strtod2): Link libm too.
* stdlib/stdlib.h (strtof128): New declaration.
(strtof128_l): Likewise.
* stdlib/tst-strtod-nan-locale-main.c: Updated to use
tst-strtod.h macros to ensure float128 gets tested too.
* stdlib/tst-strtod-round-skeleton.c (CHOOSE_f128): New macro.
* stdlib/tst-strtod.h: Include bits/floatn.h for _Float128
tests.
(IF_FLOAT128): New macro.
(GEN_TEST_STRTOD): Update to optionally include _Float128 in
the tests.
(STRTOD_TEST_FOREACH): Likewise.
* sysdeps/ieee754/float128/Makefile: Insert new strtof128 and
wcstof128 functions into libc.
* sysdeps/ieee754/float128/Versions: Add exports for the above
new functions.
* sysdeps/ieee754/float128/mpn2float128.c: New file.
* sysdeps/ieee754/float128/strtod_nan_float128.h: New file.
* sysdeps/ieee754/float128/strtof128.c: New file.
* sysdeps/ieee754/float128/strtof128_l.c: New file.
* sysdeps/ieee754/float128/strtof128_nan.c: New file.
* sysdeps/ieee754/float128/wcstof128.c: New file.
* sysdeps/ieee754/float128/wcstof128_l.c: New file.
* sysdeps/ieee754/float128/wcstof128_nan.c: New fike.
* wcsmbs/Makefile: (CFLAGS-wcstof128.c): Append strtox-CFLAGS.
(CFLAGS-wcstof128_l): Likewise.
* wcsmbs/wchar.h: Include bits/floatn.h for _Float128 tests.
(wcstof128): New declaration.
(wcstof128_l): Likewise.
Implement strcpy family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for strcpy family functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strcpy-sse2 and stpcpy-sse2.
* sysdeps/x86_64/multiarch/ifunc-unaligned-ssse3.h: New file.
* sysdeps/x86_64/multiarch/stpcpy-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/stpcpy.c: Likewise.
* sysdeps/x86_64/multiarch/stpncpy.c: Likewise.
* sysdeps/x86_64/multiarch/strcpy-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strcpy.c: Likewise.
* sysdeps/x86_64/multiarch/strncpy.c: Likewise.
* sysdeps/x86_64/multiarch/stpcpy.S: Removed.
* sysdeps/x86_64/multiarch/stpncpy.S: Likewise.
* sysdeps/x86_64/multiarch/strcpy.S: Likewise.
* sysdeps/x86_64/multiarch/strncpy.S: Likewise.
* sysdeps/x86_64/multiarch/stpncpy-c.c (weak_alias): New.
(libc_hidden_def): Always defined as empty.
* sysdeps/x86_64/multiarch/strncpy-c.c (libc_hidden_builtin_def):
Always Defined as empty.
There is currently no "cross-platform" (x86 and POWER) support for
determining the cacheline size.
This patch adds support to sysconf() to correctly report cacheline sizes
based on the information in the auxilliary vector.
Thus, using sysconf() is a cross-platform (x86 and POWER) solution for
determining cacheline sizes.
Support is added (on powerpc) for:
_SC_LEVEL1_ICACHE_SIZE _SC_LEVEL1_ICACHE_ASSOC _SC_LEVEL1_ICACHE_LINESIZE
_SC_LEVEL1_DCACHE_SIZE _SC_LEVEL1_DCACHE_ASSOC _SC_LEVEL1_DCACHE_LINESIZE
_SC_LEVEL2_CACHE_SIZE _SC_LEVEL2_CACHE_ASSOC _SC_LEVEL2_CACHE_LINESIZE
_SC_LEVEL3_CACHE_SIZE _SC_LEVEL3_CACHE_ASSOC _SC_LEVEL3_CACHE_LINESIZE
* sysdeps/unix/sysv/linux/powerpc/sysconf.c: New file.
Add powerpc-specific overrides for L1, L2, L3 CACHE_SIZEs,
CACHE_ASSOCs, and CACHE_LINESIZEs, retrieving from auxv.
* sysdeps/unix/sysv/linux/powerpc/test-powerpc-linux-sysconf.c:
New file. Invoke newly supported sysconf values for powerpc,
and report results. If none are supported, report so.
* sysdeps/unix/sysv/linux/powerpc/Makefile (tests): Add new test,
tst-sysconf.
In sys/wait.h, waitid and associated constants and types are UX-shaded
in XPG4.2 (so not in XPG4), and XSI-shaded in POSIX before 2008, so
should be appropriately conditional in the headers. This patch fixes
the conditionals accordingly. (WCONTINUED is actually still
XSI-shaded in POSIX.1:2008, but W* is also reserved there without
XSI-shading, so nothing special needs to be done about the
conditionals on WCONTINUED to conform to POSIX.1:2008 namespace
rules.)
Tested for x86_64.
[BZ #21561]
* posix/sys/wait.h (idtype_t): Change [__USE_XOPEN] condition to
[__USE_XOPEN_EXTENDED].
(id_t): Likewise.
(include of <bits/types/siginfo_t.h): Likewise.
(waitid): Likewise.
* sysdeps/unix/sysv/linux/bits/waitflags.h (WSTOPPED): Condition
on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8].
(WEXITED): Likewise.
(WCONTINUED): Likewise.
(WNOWAIT): Likewise.
* conform/Makefile (test-xfail-XPG4/stdlib.h/conform): Remove.
(test-xfail-XPG4/sys/wait.h/conform): Likewise.
(test-xfail-POSIX/sys/wait.h/conform): Likewise.
A recent GCC change to expand floating-point classification built-in
functions inline using integer rather than floating-point arithmetic
in some cases resulted in localplt test failures for nios2 and sparc32
<https://sourceware.org/ml/libc-testresults/2017-q2/msg00320.html>.
This patch updates the localplt.data files in question to mark the
relevant symbols as optional / add a new optional symbol. (The GCC
patch has been reverted because of other problems it caused, but one
can assume it will be applied again, without changes that would affect
the PLT entries generated, once those issues have been resolved.)
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/nios2/localplt.data (__gtdf2): Mark
libc.so PLT entry optional.
(__gtsf2): Likewise.
(__unorddf2): Likewise.
(__unordsf2): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/localplt.data (_Q_fgt):
New optional libc.so PLT entry.
Optimize strrchr/wcsrchr with AVX2 to check 32 bytes with vector
instructions. It is as fast as SSE2 version for small data sizes
and up to 1X faster for large data sizes on Haswell. Select AVX2
version on AVX2 machines where vzeroupper is preferred and AVX
unaligned load is fast.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strrchr-sse2, strrchr-avx2, wcsrchr-sse2 and wcsrchr-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __strrchr_avx2,
__strrchr_sse2, __wcsrchr_avx2 and __wcsrchr_sse2.
* sysdeps/x86_64/multiarch/strrchr-avx2.S: New file.
* sysdeps/x86_64/multiarch/strrchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strrchr.c: Likewise.
* sysdeps/x86_64/multiarch/wcsrchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcsrchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wcsrchr.c: Likewise.
Optimize memrchr with AVX2 to search 32 bytes with a single vector
compare instruction. It is as fast as SSE2 memrchr for small data
sizes and up to 1X faster for large data sizes on Haswell. Select
AVX2 memrchr on AVX2 machines where vzeroupper is preferred and AVX
unaligned load is fast.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memrchr-sse2 and memrchr-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __memrchr_avx2 and
__memrchr_sse2.
* sysdeps/x86_64/multiarch/memrchr-avx2.S: New file.
* sysdeps/x86_64/multiarch/memrchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/memrchr.c: Likewise.
Optimize strchr/strchrnul/wcschr with AVX2 to search 32 bytes with vector
instructions. It is as fast as SSE2 versions for size <= 16 bytes and up
to 1X faster for or size > 16 bytes on Haswell. Select AVX2 version on
AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strchr-sse2, strchrnul-sse2, strchr-avx2, strchrnul-avx2,
wcschr-sse2 and wcschr-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __strchr_avx2,
__strchrnul_avx2, __strchrnul_sse2, __wcschr_avx2 and
__wcschr_sse2.
* sysdeps/x86_64/multiarch/strchr-avx2.S: New file.
* sysdeps/x86_64/multiarch/strchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strchr.c: Likewise.
* sysdeps/x86_64/multiarch/strchrnul-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/strchrnul-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strchrnul.c: Likewise.
* sysdeps/x86_64/multiarch/wcschr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcschr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wcschr.c: Likewise.
* sysdeps/x86_64/multiarch/strchr.S: Removed.
Optimize strlen/strnlen/wcslen/wcsnlen with AVX2 to check 32 bytes with
a single vector compare instruction. It is as fast as SSE2 versions for
size <= 16 bytes and up to 1X faster for or size > 16 bytes on Haswell.
Select AVX2 version on AVX2 machines where vzeroupper is preferred and
AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strlen-sse2, strnlen-sse2, strlen-avx2, strnlen-avx2,
wcslen-sse2, wcslen-avx2 and wcsnlen-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __strlen_avx2,
__strlen_sse2, __strnlen_avx2, __strnlen_sse2, __wcslen_avx2,
__wcslen_sse2 and __wcsnlen_avx2.
* sysdeps/x86_64/multiarch/strlen-avx2.S: New file.
* sysdeps/x86_64/multiarch/strlen-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strlen.c: Likewise.
* sysdeps/x86_64/multiarch/strnlen-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/strnlen-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strnlen.c: Likewise.
* sysdeps/x86_64/multiarch/wcslen-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcslen-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wcslen.c: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen.c (OPTIMIZE (avx2)): New.
(IFUNC_SELECTOR): Return OPTIMIZE (avx2) on AVX2 machines where
vzeroupper is preferred and AVX unaligned load is fast.
SSE2 memchr is extended to support wmemchr. AVX2 memchr/rawmemchr/wmemchr
are added to search 32 bytes with a single vector compare instruction.
AVX2 memchr/rawmemchr/wmemchr are as fast as SSE2 memchr/rawmemchr/wmemchr
for small sizes and up to 1.5X faster for larger sizes on Haswell and
Skylake. Select AVX2 memchr/rawmemchr/wmemchr on AVX2 machines where
vzeroupper is preferred and AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
* sysdeps/x86_64/memchr.S (MEMCHR): New. Depending on if
USE_AS_WMEMCHR is defined.
(PCMPEQ): Likewise.
(memchr): Renamed to ...
(MEMCHR): This. Support wmemchr if USE_AS_WMEMCHR is defined.
Replace pcmpeqb with PCMPEQ.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memchr-sse2, rawmemchr-sse2, memchr-avx2, rawmemchr-avx2,
wmemchr-sse4_1, wmemchr-avx2 and wmemchr-c.
* sysdeps/x86_64/multiarch/ifunc-avx2.h: New file.
* sysdeps/x86_64/multiarch/memchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/memchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/memchr.c: Likewise.
* sysdeps/x86_64/multiarch/rawmemchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/rawmemchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/rawmemchr.c: Likewise.
* sysdeps/x86_64/multiarch/wmemchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wmemchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wmemchr.c: Likewise.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Test __memchr_avx2, __memchr_sse2,
__rawmemchr_avx2, __rawmemchr_sse2, __wmemchr_avx2 and
__wmemchr_sse2.
1 << 31 is undefined, so replace it with a cleaner check. Also remove
magic numbers in comments.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h: Remove
mention of magic numbers in comments.
(_dl_procinfo): Fix undefined behavior
There are 2 minimal strtoul implementations in ld.so:
1. __strtoul_internal in elf/dl-minimal.c.
2. tunables_strtoul in elf/dl-tunables.c.
This patch adds _dl_strtoul to replace them. Tested builds with and
without --enable-tunables.
[BZ #21528]
* elf/dl-minimal.c (__strtoul_internal): Removed.
(strtoul): Likewise.
* elf/dl-misc.c (_dl_strtoul): New function.
* elf/dl-tunables.c (tunables_strtoul): Removed.
(tunable_initialize): Replace tunables_strtoul with _dl_strtoul.
* elf/rtld.c (process_envvars): Likewise.
* sysdeps/unix/sysv/linux/dl-librecon.h (_dl_osversion_init):
Likewise.
* sysdeps/generic/ldsodefs.h (_dl_strtoul): New prototype.
wint_t is a little finicky because it might be defined by stddef.h, which
belongs to the compiler.
In addition to the _types_, a bunch of other declarations shared between
wctype.h and wchar.h are factored out to their own header.
* libio/bits/types/FILE.h, libio/bits/types/__FILE.h
* wcsmbs/bits/types/mbstate_t.h, wcsmbs/bits/types/__mbstate_t.h
* wcsmbs/bits/types/wint_t.h: New single-type definition files.
* wctype/bits/wctype-wchar.h: New file holding declarations shared
between wctype.h and wchar.h.
* libio/Makefile, wcsmbs/Makefile, wctype/Makefile:
Install them.
* include/bits/types/FILE.h, include/bits/types/__FILE.h
* include/bits/types/mbstate_t.h, include/bits/types/__mbstate_t.h
* include/bits/types/wint_t.h, include/bits/wcsmbs-wchar.h:
New wrappers.
* include/stdio.h, include/wchar.h, include/wctype.h:
No need to handle __need macros.
* grp/grp.h, gshadow/gshadow.h, hurd/hurd.h, iconv/gconv.h
* libio/stdio.h, mach/mach.h, misc/mntent.h, pwd/pwd.h
* shadow/shadow.h, stdio-common/printf.h, wcsmbs/uchar.h
* wcsmbs/wchar.h, wctype/wctype.h
* sysdeps/generic/_G_config.h, sysdeps/unix/sysv/linux/_G_config.h
Use the new files instead of __need macros.
Add strfromf128 to stdlib when _Float128 support is enabled.
* stdio-common/printf-parsemb.c (__parse_one_specmb): Initialize
spec->info.is_binary128 to zero.
* stdio-common/printf.h (printf_info): Add new member is_binary128
to indicate that the number being converted to string is compatible
with the IEC 60559 binary128 format.
* stdio-common/printf_fp.c (__printf_fp_l): Add code to deal with
_Float128 numbers.
* stdio-common/printf_fphex.c: Include ieee754_float128.h and
ldbl-128/printf_fphex_macros.h
(__printf_fphex): Add code to deal with _Float128 numbers.
* stdio-common/printf_size.c (__printf_size): Likewise.
* stdio-common/vfprintf.c (process_arg): Initialize member
info.is_binary128 to zero.
* stdlib/fpioconst.h (FLT128_MAX_10_EXP_LOG): New macro.
* stdlib/stdlib.h: Include bits/floatn.h for _Float128 support.
(strfromf128): New declaration.
* stdlib/strfrom-skeleton.c (STRFROM): Set member info.is_binary128
to one.
* sysdeps/ieee754/float128/Makefile: Add strfromf128.
* sysdeps/ieee754/float128/Versions: Likewise.
* sysdeps/ieee754/float128/strfromf128.c: New file.
This patch refactors the macro PRINT_FPHEX_LONG_DOUBLE from the file
sysdeps/ieee754/ldbl-128/printf_fphex.c into a function-like macro to
enable its use for both long double and _Float128, when they are
ABI-distinct.
* sysdeps/ieee754/ldbl-128/printf_fphex.c: Include
ldbl-128/printf_fphex_macros.h for the definition of PRINT_FPHEX.
(PRINT_FPHEX_LONG_DOUBLE): Define based on PRINT_FPHEX.
* sysdeps/ieee754/ldbl-128/printf_fphex_macros.h
(PRINT_FPHEX): New function-like macro that can be used for long
double, as well as for _Float128
Reuse the code for __mpn_extract_long_double to implement
__mpn_extract_float128.
* include/gmp.h: Include bits/floatn.h
(__mpn_extract_float128): Declare when __HAVE_DISTINCT_FLOAT128 is 1.
* stdlib/gmp-impl.h: Also check if alloca is not defined before
including stack-alloc.h. It could have been defined by other header
which not necessarily defines HAVE_ALLOCA.
* sysdeps/ieee754/float128/Makefile: New file.
* sysdeps/ieee754/float128/float1282mpn.c: New file.
* sysdeps/ieee754/float128/float128_private.h: Include gmp.h before
redefining __mpn_extract_long_double to __mpn_extract_float128, then
redefine __mpn_extract_long_double to __mpn_extract_float128.
* sysdeps/ieee754/ldbl-128/ldbl2mpn.c: Replace long double with
_Float128 to allow float128_private.h overrides.
Since ifunc-sse4_1.h is included only by wcsnlen.c, we can fold it
into wcsnlen.c. No code changes in wcsnlen.o.
2017-06-07 H.J. Lu <hongjiu.lu@intel.com>
* sysdeps/x86_64/multiarch/ifunc-sse4_1.h: Removed and folded
into ...
* sysdeps/x86_64/multiarch/wcsnlen.c: Here. Don't include
ifunc-sse4_1.h.
`ptsname_r' is declared in stdlib.h to only accept a `nonnull'
second argument and therefore GCC may choose to make optimizations
based on the assumption that this argument is NULL. This means
that potentially, GCC can optimize away the NULL check at some
point in the future. Since this is a programming interface, we
might as well remove the NULL check ourselves.
This also warrants a change to the `ptsname_r' manual page that
must be submitted to the corresponding mailing list.
In addition, remove the NULL buffer test in login/tst-ptsname.c.
Add support for routines in dl-procinfo.h to show string versions of
HWCAP entries when a program is invoked with the LD_SHOW_AUXV
environment variable set and also to aid in path resolution for
ldconfig.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.c
(_dl_aarch64_cap_flags): New array.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h
(_dl_hwcap_string, _dl_string_hwcap, _dl_procinfo): Implement
functions.
The LD_HWCAP_MASK environment variable was ignored in static binaries,
which is inconsistent with the behaviour of dynamically linked
binaries. This seems to have been because of the inability of
ld_hwcap_mask being read early enough to influence anything but now
that it is in tunables, the mask is usable in static binaries as well.
This feature is important for aarch64, which relies on HWCAP_CPUID
being masked out to disable multiarch. A sanity test on x86_64 shows
that there are no failures. Likewise for aarch64.
* elf/dl-hwcaps.h [HAVE_TUNABLES]: Always read hwcap_mask.
* sysdeps/sparc/sparc32/dl-machine.h [HAVE_TUNABLES]:
Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Always set
up hwcap and hwcap_mask.
Now that LD_HWCAP_MASK (or glibc.tune.hwcap_mask) is read early enough
to influence cpu feature check in aarch64, use it to influence
multiarch selection. Setting LD_HWCAP_MASK such that it clears
HWCAP_CPUID will now disable multiarch for the binary.
HWCAP_CPUID is also now set in HWCAP_IMPORTANT so that it is set by
default. With this patch, this feature is only usable with
dyanmically linked binaries because LD_HWCAP_MASK is not read for
static binaries. A future patch fixes that.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
(init_cpu_features): Use glibc.tune.hwcap_mask.
* sysdeps/unix/sysv/linux/aarch64/dl-procinfo.h: New file.
Drop _dl_hwcap_mask when building with tunables. This completes the
transition of hwcap_mask reading from _dl_hwcap_mask to tunables.
* elf/dl-hwcaps.h: New file.
* elf/dl-hwcaps.c: Include it.
(_dl_important_hwcaps)[HAVE_TUNABLES]: Read and update
glibc.tune.hwcap_mask.
* elf/dl-cache.c: Include dl-hwcaps.h.
(_dl_load_cache_lookup)[HAVE_TUNABLES]: Read
glibc.tune.hwcap_mask.
* sysdeps/sparc/sparc32/dl-machine.h: Likewise.
* elf/dl-support.c (_dl_hwcap2)[HAVE_TUNABLES]: Drop
_dl_hwcap_mask.
* elf/rtld.c (rtld_global_ro)[HAVE_TUNABLES]: Drop
_dl_hwcap_mask.
(process_envvars)[HAVE_TUNABLES]: Likewise.
* sysdeps/generic/ldsodefs.h (rtld_global_ro)[HAVE_TUNABLES]:
Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Don't
initialize dl_hwcap_mask when tunables are enabled.
The dl-procinfo.h for linux/s390 and linux/i386 don't have include
guards, which causes them to fail since addition of LD_HWCAP_MASK to
tunables. Add _DL_I386_PROCINFO_H guard to avoid redefining
_dl_procinfo on multiple includes and also allow the subsequent
include of another dl-procinfo.h to work.
Verified with a build test on i686.
* sysdeps/unix/sysv/linux/i386/dl-procinfo.h: Add include
guard.
* sysdeps/unix/sysv/linux/s390/dl-procinfo.h: Likewise.
Since wcsnlen.S uses pminud which is the part of SSE4.1, move wcsnlen.S
to multiarch/wcsnlen-sse4_1.S.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
wcsnlen-sse4_1 and wcsnlen-c.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Test __wcsnlen_sse4_1 and
__wcsnlen_sse2.
* sysdeps/x86_64/multiarch/ifunc-sse4_1.h: New file.
* sysdeps/x86_64/multiarch/wcsnlen-c.c: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen-sse4_1.S: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen.c: Likewise.
* sysdeps/x86_64/wcsnlen.S: Removed.
This patch removes the s390 specific implementation of spinlock code
and is now using the generic one.
ChangeLog:
* sysdeps/s390/nptl/pthread_spin_init.c: Delete File.
* sysdeps/s390/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/s390/nptl/pthread_spin_trylock.c: Likewise.
* sysdeps/s390/nptl/pthread_spin_unlock.c: Likewise.
This patch optimizes the generic spinlock code.
The type pthread_spinlock_t is a typedef to volatile int on all archs.
Passing a volatile pointer to the atomic macros which are not mapped to the
C11 atomic builtins can lead to extra stores and loads to stack if such
a macro creates a temporary variable by using "__typeof (*(mem)) tmp;".
Thus, those macros which are used by spinlock code - atomic_exchange_acquire,
atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted.
According to the comment from Szabolcs Nagy, the type of a cast expression is
unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm):
__typeof ((__typeof (*(mem)) *(mem)) tmp;
Thus from spinlock perspective the variable tmp is of type int instead of
type volatile int. This patch adjusts those macros in include/atomic.h.
With this construct GCC >= 5 omits the extra stores and loads.
The atomic macros are replaced by the C11 like atomic macros and thus
the code is aligned to it. The pthread_spin_unlock implementation is now
using release memory order instead of sequentially consistent memory order.
The issue with passed volatile int pointers applies to the C11 like atomic
macros as well as the ones used before.
I've added a glibc_likely hint to the first atomic exchange in
pthread_spin_lock in order to return immediately to the caller if the lock is
free. Without the hint, there is an additional jump if the lock is free.
I've added the atomic_spin_nop macro within the loop of plain reads.
The plain reads are also realized by C11 like atomic_load_relaxed macro.
The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire
the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange
or a CAS. This is defined in atomic-machine.h for all architectures.
The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed.
There is no technical reason for throwing in a CAS every now and then,
and so far we have no evidence that it can improve performance.
If that would be the case, we have to adjust other spin-waiting loops
elsewhere, too! Using a CAS loop without plain reads is not a good idea
on many targets and wasn't used by one. Thus there is now no option to
do so.
Architectures are now using the generic spinlock automatically if they
do not provide an own implementation. Thus the pthread_spin_lock.c files
in sysdeps folder are deleted.
ChangeLog:
* NEWS: Mention new spinlock implementation.
* include/atomic.h:
(__atomic_val_bysize): Cast type to omit volatile qualifier.
(atomic_exchange_acq): Likewise.
(atomic_load_relaxed): Likewise.
(ATOMIC_EXCHANGE_USES_CAS): Check definition.
* nptl/pthread_spin_init.c (pthread_spin_init):
Use atomic_store_relaxed.
* nptl/pthread_spin_lock.c (pthread_spin_lock):
Use C11-like atomic macros.
* nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* nptl/pthread_spin_unlock.c (pthread_spin_unlock):
Use atomic_store_release.
* sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File.
* sysdeps/arm/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/mips/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define.
* sysdeps/alpha/atomic-machine.h: Likewise.
* sysdeps/arm/atomic-machine.h: Likewise.
* sysdeps/i386/atomic-machine.h: Likewise.
* sysdeps/ia64/atomic-machine.h: Likewise.
* sysdeps/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise.
* sysdeps/microblaze/atomic-machine.h: Likewise.
* sysdeps/mips/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise.
* sysdeps/s390/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc64/atomic-machine.h: Likewise.
* sysdeps/tile/tilegx/atomic-machine.h: Likewise.
* sysdeps/tile/tilepro/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise.
* sysdeps/x86_64/atomic-machine.h: Likewise.
Since cpu_features is available, use it instead of dl_x86_cpu_features.
* sysdeps/x86/cacheinfo.c (intel_check_word): Accept cpu_features
and use it instead of dl_x86_cpu_features.
(handle_intel): Replace maxidx with cpu_features. Pass
cpu_features to intel_check_word.
(__cache_sysconf): Pass cpu_features to handle_intel.
(init_cacheinfo): Likewise. Use cpu_features instead of
dl_x86_cpu_features.
Optimize x86-64 memcmp/wmemcmp with AVX2. It uses vector compare as
much as possible. It is as fast as SSE4 memcmp for size <= 16 bytes
and up to 2X faster for size > 16 bytes on Haswell and Skylake. Select
AVX2 memcmp/wmemcmp on AVX2 machines where vzeroupper is preferred and
AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
Key features:
1. For size from 2 to 7 bytes, load as big endian with movbe and bswap
to avoid branches.
2. Use overlapping compare to avoid branch.
3. Use vector compare when size >= 4 bytes for memcmp or size >= 8
bytes for wmemcmp.
4. If size is 8 * VEC_SIZE or less, unroll the loop.
5. Compare 4 * VEC_SIZE at a time with the aligned first memory area.
6. Use 2 vector compares when size is 2 * VEC_SIZE or less.
7. Use 4 vector compares when size is 4 * VEC_SIZE or less.
8. Use 8 vector compares when size is 8 * VEC_SIZE or less.
* sysdeps/x86/cpu-features.h (index_cpu_MOVBE): New.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memcmp-avx2 and wmemcmp-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Test __memcmp_avx2 and __wmemcmp_avx2.
* sysdeps/x86_64/multiarch/memcmp-avx2.S: New file.
* sysdeps/x86_64/multiarch/wmemcmp-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/memcmp.S: Use __memcmp_avx2 on AVX
2 machines if AVX unaligned load is fast and vzeroupper is
preferred.
* sysdeps/x86_64/multiarch/wmemcmp.S: Use __wmemcmp_avx2 on AVX
2 machines if AVX unaligned load is fast and vzeroupper is
preferred.
The difference between strlen and wcslen is byte vs int. We can
replace pminub and pcmpeqb with pminud and pcmpeqd to turn strlen
into wcslen.
* sysdeps/x86_64/strlen.S (PMINU): New.
(PCMPEQ): Likewise.
(SHIFT_RETURN): Likewise.
(FIND_ZERO): Replace pcmpeqb with PCMPEQ.
(strlen): Add SHIFT_RETURN before ret. Replace pcmpeqb and
pminub with PCMPEQ and PMINU.
* sysdeps/x86_64/wcsnlen.S: New file.
By x86-64 specification, 32-bit destination registers are zero-extended
to 64 bits. There is no need to use 64-bit registers when only the lower
32 bits are non-zero. Also 2 instructions in:
mov %rdi, %rcx
and $15, %rcx
jz L(length_less16_offset0)
mov %rdi, %rcx <<< redundant
and $15, %rcx <<< redundant
are redundant.
* sysdeps/x86_64/memrchr.S (__memrchr): Use 32-bit registers for
the lower 32 bits. Remove redundant instructions.
The kernel interface for p{readv,writev}{64}v is
(unsigned long fd, {const }struct iovec *iov, unsigned long vlen,
unsigned long pos_l, unsigned long pos_h)
Except for targets which define __ARCH_WANT_COMPAT_SYS_PREADV64 and
__ARCH_WANT_COMPAT_SYS_PWRITEV64,
(unsigned long fd, {const }struct iovec *iov, unsigned long vlen,
off64_t pos)
is used for p{readv,writev}{64}v. X32 is the only such target. The
LO_HI_LONG macro is used to pass offset to the pos_l and pos_h pair.
Since pos_h is ignored when size of offset == sizeof of pos_l, x86-64
has
#define LO_HI_LONG(val) (val)
But the kernel interface for p{readv,writev}{64}v2 is
(unsigned long fd, {const }struct iovec *iov, unsigned long vlen,
unsigned long pos_l, unsigned long pos_h, int flags)
Except for targets which define __ARCH_WANT_COMPAT_SYS_PREADV64V2 and
__ARCH_WANT_COMPAT_SYS_PWRITEV64V2,
(unsigned long fd, {const }struct iovec *iov, unsigned long vlen,
off64_t pos, int flags)
is used for p{readv,writev}{64}v2. X32 is the only such target. Update
x86-64 LO_HI_LONG to pass 0 as the high part of the offset argument for
p{readv,writev}{64}v2 and define a different LO_HI_LONG for x32 to only
pass one argument for offset.
Tested on x32 and x86-64.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h (LO_HI_LONG): Pass
0 as the high part of offset.
* sysdeps/unix/sysv/linux/x86_64/x32/sysdep.h (LO_HI_LONG): New.
Various bits/signum.h headers define SIG_HOLD if __USE_UNIX98. That
should be __USE_XOPEN, as this macro is in XPG4. This patch fixes the
conditionals accordingly. Because of other header bugs, this does not
allow any XFAILs to be removed (however, the XPG4/signal.h/conform
XFAIL only depends on a few such straightforward header bugs, not on
the more complicated to fix ucontext_t issues, as ucontext_t isn't
included in signal.h in XPG4).
Tested for x86_64.
[BZ #21538]
* bits/signum.h (SIG_HOLD): Define if [__USE_XOPEN], not
[__USE_UNIX98].
* sysdeps/unix/bsd/bits/signum.h (SIG_HOLD): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/signum.h (SIG_HOLD):
Likewise.
* sysdeps/unix/sysv/linux/bits/signum.h (SIG_HOLD): Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/signum.h (SIG_HOLD): Likewise.
* sysdeps/unix/sysv/linux/mips/bits/signum.h (SIG_HOLD): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/signum.h (SIG_HOLD):
Likewise.
glibc defines the stack_t type with the tag struct sigaltstack. This
is not permitted by POSIX; sigaltstack is only reserved with file
scope in the namespace of ordinary identifiers, not the tag namespace,
and in the case where stack_t is obtained from ucontext.h rather than
signal.h, it's not reserved with file scope at all.
This patch removes the tag accordingly and updates uses in glibc of
struct sigaltstack. This is similar to the removal of the "struct
siginfo" tag a few years ago: C++ name mangling changes are an
unavoidable consequence. A NEWS item is added to note the changed
mangling. There is inevitably some risk of breaking builds of
anything that relies on the struct sigaltstack name (though the first
few hits I looked at from codesearch.debian.net generally seemed to
involve code that could use the stack_t name conditionally, so
depending on how they determine the conditionals they may work with
glibc not defining the struct tag anyway).
Tested for x86_64 and x86, and with build-many-glibcs.py.
[BZ #21517]
* bits/types/stack_t.h (stack_t): Remove struct tag.
* sysdeps/unix/sysv/linux/bits/types/stack_t.h (stack_t):
Likewise.
* sysdeps/unix/sysv/linux/mips/bits/types/stack_t.h (stack_t):
Likewise.
* debug/segfault.c (install_handler): Use stack_t instead of
struct sigaltstack.
* hurd/hurd/signal.h (struct hurd_sigstate): Likewise.
* hurd/trampoline.c (_hurd_setup_sighandler): Likewise.
* include/signal.h (__sigaltstack): Likwise.
* signal/sigaltstack.c (__sigaltstack): Likewise.
* signal/signal.h (sigaltstack): Likewise.
* sysdeps/mach/hurd/i386/signal-defines.sym
(SIGALTSTACK__SS_SP__OFFSET): Likewise.
(SIGALTSTACK__SS_SIZE__OFFSET): Likewise.
(SIGALTSTACK__SS_FLAGS__OFFSET): Likewise.
* sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise.
* sysdeps/mach/hurd/sigstack.c (sigstack): Likewise.
* sysdeps/unix/sysv/linux/alpha/sys/procfs.h (struct
elf_prstatus): Likewise.
* sysdeps/unix/sysv/linux/hppa/____longjmp_chk.c (CHECK_SP):
Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/procfs.h (struct elf_prstatus):
Likewise.
* sysdeps/unix/sysv/linux/m68k/____longjmp_chk.c (CHECK_SP):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/procfs.h (struct
elf_prstatus): Likewise.
* sysdeps/unix/sysv/linux/sh/sys/procfs.h (struct elf_prstatus):
Likewise.
* sysdeps/unix/sysv/linux/sys/procfs.h (struct elf_prstatus):
Likewise.
__x86_shared_non_temporal_threshold was set to 6 times of per-core
shared cache size, based on the large memcpy micro benchmark in glibc
on a 8-core processor. For a processor with more than 8 cores, the
threshold is too low. Set __x86_shared_non_temporal_threshold to the
3/4 of the total shared cache size so that it is unchanged on 8-core
processors. On processors with less than 8 cores, the threshold is
lower.
* sysdeps/x86/cacheinfo.c (__x86_shared_non_temporal_threshold):
Set to the 3/4 of the total shared cache size.
A further simplification could eliminate the canon variable in
gaih_inet and replace it with canonbuf. However, canonbuf is
used as a flag in the nscd code, which makes this somewhat
non-straightforward.
On Linux-based configurations, bits/syscall.h is a generated file.
To avoid build-ordering problems, the Linux sys/syscall.h only includes
bits/syscall.h if _LIBC is not defined. After the _ISOMAC-testsuite
changes, this means any test case that includes sys/syscall.h tries to
pull in bits/syscall.h. This would be fine, because it'll definitely
have been generated by the time we start compiling tests, except that
the generated <builddir>/misc/bits/syscall.h is not visible in the
include path, because nothing needed it till now. So we either get
the bits/syscall.h from the host system, or the build fails.
The fix is simple: add a shim header for bits/syscall.h. I put it in
sysdeps/unix/sysv/linux/include instead of the top-level include/
because bits/syscall.h doesn't exist at all on other configurations as
far as I can tell.
This is known to affect nptl/tst-cond2[45]. Thanks to John David
Anglin for noticing the problem.
[BZ #21514]
* sysdeps/unix/sysv/linux/include/bits/syscall.h: New shim header
pointing to the generated file in <builddir>/misc/bits/syscall.h.
Continuing the fixes for namespace issues in sys/ucontext.h, this
patch moves various symbols into the implementation namespace in the
absence of __USE_MISC. As with previous changes, it is nonexhaustive,
just covering more straightforward cases.
Structure fields are generally changed to have a prefix __ in the
absence of __USE_MISC, via a macro __ctx (used without a space before
the open parenthesis, since the result is a single identifier).
Various macros such as NGREG also have leading __ added. No changes
are made to structure tags (and thus to C++ name mangling), except
that in the (unused) file sysdeps/i386/sys/ucontext.h, structures
defined inside other structures as the type for a field have their
tags removed in the non-__USE_MISC case (those structure tags would
not in any case have been visible in C++, because in C++ the scope of
such a tag is limited to the containing structure). No changes are
made to the contents of bits/sigcontext.h, or to whether it is
included. Because of remaining namespace issues, this patch does not
yet fix the bug or allow any XFAILs to be removed.
Tested for x86_64 and x86, and with build-many-glibcs.py.
[BZ #21457]
* sysdeps/arm/sys/ucontext.h (NGREG): Rename to __NGREG and define
NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(__ctx): New macro.
(mcontext_t): Use __ctx in defining fields.
* sysdeps/i386/sys/ucontext.h (NGREG): Rename to __NGREG and
define NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(__ctx): New macro.
(__ctxt): Likewise.
(fpregset_t): Use __ctx and __ctxt in defining fields.
(mcontext_t): Likewise.
* sysdeps/m68k/sys/ucontext.h (NGREG): Rename to __NGREG and
define NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(__ctx): New macro.
(mcontext_t): Use __ctx in defining fields.
* sysdeps/mips/sys/ucontext.h (NGREG): Rename to __NGREG and
define NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(__ctx): New macro.
(fpregset_t): Use __ctx in defining fields.
(mcontext_t): Likewise.
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (NGREG): Rename to
__NGREG and define NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if
[__USE_MISC].
(fpregset_t): Define using __NFPREG.
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (NGREG): Rename to
__NGREG and define NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(__ctx): New macro.
(fpregset_t): Use __ctx in defining fields.
(mcontext_t): Likewise.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h (NGREG): Rename to
__NGREG and define NGREG to __NGREG if [__USE_MISC].
(NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if
[__USE_MISC].
(gregset_t): Define using __NGREG.
(__ctx): New macro.
(fpregset_t): Use __ctx in defining fields.
(mcontext_t): Likewise.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (__ctx): New macro.
(mcontext_t): Use __ctx in defining fields.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (__ctx): New
macro.
[__WORDSIZE == 32] (NGREG): Rename to __NGREG and define NGREG to
__NGREG if [__USE_MISC].
[__WORDSIZE == 32] (gregset_t): Define using __NGREG.
[__WORDSIZE == 32] (fpregset_t): Use __ctx in defining fields.
(mcontext_t): Likewise.
[__WORDSIZE != 32] (NGREG): Rename to __NGREG and define NGREG to
__NGREG if [__USE_MISC].
[__WORDSIZE != 32] (NFPREG): Rename to __NFPREG and define NFPREG
to __NFPREG if [__USE_MISC].
[__WORDSIZE != 32] (NVRREG): Rename to __NVRREG and define NVRREG
to __NVRREG if [__USE_MISC].
[__WORDSIZE != 32] (gregset_t): Define using __NGREG.
[__WORDSIZE != 32] (fpregset_t): Define using __NFPREG.
[__WORDSIZE != 32] (vscr_t): Use __ctx in defining fields.
[__WORDSIZE != 32] (vrregset_t): Likewise.
[__WORDSIZE != 32] (mcontext_t): Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h (__ctx): New macro.
(__psw_t): Use __ctx in defining fields.
(NGREG): Rename to __NGREG and define NGREG to __NGREG if
[__USE_MISC].
(gregset_t): Define using __NGREG.
(fpreg_t): Use __ctx in defining fields.
(fpregset_t): Likewise.
(mcontext_t): Likewise.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h (NGREG): Rename to
__NGREG and define NGREG to __NGREG if [__USE_MISC].
(gregset_t): Define using __NGREG.
(NFPREG): Rename to __NFPREG and define NFPREG to __NFPREG if
[__USE_MISC].
(fpregset_t): Define using __NFPREG.
(__ctx): New macro.
(mcontext_t): Use __ctx in defining fields.
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h (__ctx): New macro.
[__x86_64__] (NGREG): Rename to __NGREG and define NGREG to
__NGREG if [__USE_MISC].
[__x86_64__] (gregset_t): Define using __NGREG.
[__x86_64__] (struct _libc_fpxreg): Use __ctx in defining fields.
[__x86_64__] (struct _libc_fpstate): Likewise.
[__x86_64__] (mcontext_t): Likewise.
[!__x86_64__] (NGREG): Rename to __NGREG and define NGREG to
__NGREG if [__USE_MISC].
[!__x86_64__] (gregset_t): Define using __NGREG.
[!__x86_64__] (struct _libc_fpreg): Use __ctx in defining fields.
[!__x86_64__] (struct _libc_fpstate): Likewise.
[!__x86_64__] (mcontext_t): Likewise.
libpthread used to have its own vfork implementation that differed
from libc's only in having a pointless micro-optimization. There is
no longer any use to having a separate copy in libpthread, but the
historical ABI requires a compatibility shim. microblaze was trying
to be slightly too clever about how it did this, and tickled a linker
bug. The linker bug should get fixed eventually, but there's no
reason for us to keep tickling it in the meantime.
This doesn't reuse the generic pt-vfork.c because microblaze doesn't
have IFUNC support yet, and it doesn't reuse aarch64/pt-vfork.c
because that fails to generate a tailcall (with GCC 7.1.1).
* sysdeps/unix/sysv/linux/microblaze/pt-vfork.S: Don't include
alpha/pt-vfork.S. Provide own compat shim for vfork and __vfork.
* sysdeps/unix/sysv/linux/microblaze/vfork.S: Add __libc_vfork alias.
* sysdeps/unix/sysv/linux/microblaze/localplt.data:
libpthread.so no longer references __errno_location.
This patch adds support of preadv2 and pwritev2 which are similar to
preadv/pwritev but with an extra flag argument. As for preadv/pwritev
both interfaces are added a non-standard GNU API.
For default 'posix' implementation trying to emulate the Linux supported
flags is troublesome:
* We can not temporary change the file state of the O_DSYNC and O_SYNC
flags to emulate RWF_{D}SYNC (attempts to change the state of using
fcntl are silently ignored).
* IOCB_HIPRI requires the file opened in O_DIRECT and uses an internal
semantic not provided by any other flag (O_NONBLOCK for instance).
So default sysdeps/posix implementations fails with EOPNOTSUPP for any non
supported flag (which are none currently) calls generic preadv/pwritev.
Basically this implementation supports only preadv2 called as preadv (with
flags sets to 0).
The Linux one uses the preadv2/pwritev2 syscall if defined, otherwise it
call preadv/writev. Instead of using the previous __ASSUME_* to
unconditionally issue the syscall (and avoid building the fallback routine),
it call pread/write if the preadv2/pwritev2 syscalls fails. The idea
is just avoid adding another __ASSUME_* and checking each architecture
on every kernel bump and simplify code conditionals.
Checked on x86_64-linux-gnu and on i686-linux-gnu and a check with
run-built-tests=no on aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips{64,64n32}-linux-gnu,
nios2-linux-gnu, powerpc{64,64le}-linux-gnu, s390{x}-linux-gnu,
sparc{64,v9}-linux-gnu, tile{gx,pro}-linux-gnu, and sh4-linux-gnu (all using
gcc 6.3).
* NEWS: Add note about pwritev2 and preadv2 inclusion.
* misc/Makefile (routines): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
(tests): Add tst-preadvwritev2 and tst-preadvwritev64v2.
* misc/Versions (GLIBC_2.26): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
* misc/preadv2.c: New file.
* misc/preadv64v2.c: Likewise.
* misc/pwritev2.c: Likewise.
* misc/pwritev64v2.c: Likewise.
* misc/tst-preadvwritev2.c: Likewise.
* misc/tst-preadvwritev64v2.c: Likewise.
* manual/llio.texi: Add preadv2 and pwritev2 documentation.
* misc/sys/uio.h [__USE_GNU && !__USE_FILE_OFFSET64] (preadv2): New
prototype.
[__USE_GNU && !__USE_FILE_OFFSET64] (pwritev2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (preadv64v2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (pwritev64v2): Likewise.
* misc/tst-preadvwritev-common.c (PREADV): Define if not defined.
(PWRITEV): Likewise.
(do_test_with_offset): Use PREADV and PWRITEV macros and check for
ENOSYS.
* nptl/tst-cancel4.c (tf_pwritev2): New test.
(tf_preadv2): Likewise.
(tf_fsync): Add tf_pwritev2 and tf_preadv2.
* sysdeps/posix/preadv2.c: Likewise.
* sysdeps/posix/preadv64v2.c: Likewise.
* sysdeps/posix/pwritev2.c: Likewise.
* sysdeps/posix/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/kernel-features.h: Add comment for syscall
support in kernel.
* sysdeps/unix/sysv/linux/preadv2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv64v2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv.c (preadv): Add libc_hidden_def.
* sysdeps/unix/sysv/linux/preadv64.c (preadv64): Likewise.
* sysdeps/unix/sysv/linux/pwritev.c (pwritev): Likewise.
* sysdeps/unix/sysv/linux/pwritev64.c (pwritev64): Likewise.
* sysdeps/unix/sysv/linux/bits/uio.h: Add supported preadv2/pwritev2
support flags on Linux.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist (GLIBC_2.26): Add
preadv2, preadv64v2, pwritev2, pwritev64v2.
* sysdeps/unix/sysv/linux/alpha/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist (GLIBC_2.26):
Likewise.
Allow the CPU features structure set up to be overridden by tunables
by delaying it to until after tunables are initialized. The
initialization is already delayed in dynamically linked glibc, it is
only in static binaries that the initialization is set early to allow
it to influence IFUNC relocations that happen in libc-start. It is a
bit too early however and there is a good place between tunables
initialization and IFUNC relocations where this can be done.
Verified that this does not regress the testsuite.
* csu/libc-start.c [!ARCH_INIT_CPU_FEATURES]: Define
ARCH_INIT_CPU_FEATURES.
(LIBC_START_MAIN): Call it.
* sysdeps/unix/sysv/linux/aarch64/libc-start.c
(__libc_start_main): Remove.
(ARCH_INIT_CPU_FEATURES): New macro.
* sysdeps/x86/libc-start.c (__libc_start_main): Remove.
(ARCH_INIT_CPU_FEATURES): New macro.
By x86-64 specification, 32-bit destination registers are zero-extended
to 64 bits. There is no need to use 64-bit registers when only the lower
32 bits are non-zero.
* sysdeps/x86_64/memchr.S (MEMCHR): Use 32-bit registers for
the lower 32 bits.
This change defines float128_private.h which contains
macros used to override long double naming conventions
when building a ldbl file.
* math/math.h [__HAVE_FLOAT128 && __GLIBC_USE (IEC_60559_TYPES_EXT)]
(SNANF128): New macro.
* math/e_sqrtf128.c: New file.
* math/s_fmaxmag_template.c: Include math_private.h in order to
make inline expansion of fabs128().
* math/s_fminmag_template.c: Likewise.
* sysdeps/ieee754/float128/e_acosf128.c: New file.
* sysdeps/ieee754/float128/e_acoshf128.c: New file.
* sysdeps/ieee754/float128/e_asinf128.c: New file.
* sysdeps/ieee754/float128/e_atan2f128.c: New file.
* sysdeps/ieee754/float128/e_atanhf128.c: New file.
* sysdeps/ieee754/float128/e_coshf128.c: New file.
* sysdeps/ieee754/float128/e_exp10f128.c: New file.
* sysdeps/ieee754/float128/e_expf128.c: New file.
* sysdeps/ieee754/float128/e_fmodf128.c: New file.
* sysdeps/ieee754/float128/e_gammaf128_r.c: New file.
* sysdeps/ieee754/float128/e_hypotf128.c: New file.
* sysdeps/ieee754/float128/e_ilogbf128.c: New file.
* sysdeps/ieee754/float128/e_j0f128.c: New file.
* sysdeps/ieee754/float128/e_j1f128.c: New file.
* sysdeps/ieee754/float128/e_jnf128.c: New file.
* sysdeps/ieee754/float128/e_lgammaf128_r.c: New file.
* sysdeps/ieee754/float128/e_log10f128.c: New file.
* sysdeps/ieee754/float128/e_log2f128.c: New file.
* sysdeps/ieee754/float128/e_logf128.c: New file.
* sysdeps/ieee754/float128/e_powf128.c: New file.
* sysdeps/ieee754/float128/e_rem_pio2f128.c: New file.
* sysdeps/ieee754/float128/e_remainderf128.c: New file.
* sysdeps/ieee754/float128/e_scalbf128.c: New file.
* sysdeps/ieee754/float128/e_sinhf128.c: New file.
* sysdeps/ieee754/float128/float128_private.h: New file.
* sysdeps/ieee754/float128/gamma_productf128.c: New file.
* sysdeps/ieee754/float128/ieee754_float128.h: New file.
* sysdeps/ieee754/float128/k_cosf128.c: New file.
* sysdeps/ieee754/float128/k_sincosf128.c: New file.
* sysdeps/ieee754/float128/k_sinf128.c: New file.
* sysdeps/ieee754/float128/k_tanf128.c: New file.
* sysdeps/ieee754/float128/lgamma_negf128.c: New file.
* sysdeps/ieee754/float128/lgamma_productf128.c: New file.
* sysdeps/ieee754/float128/s_asinhf128.c: New file.
* sysdeps/ieee754/float128/s_atanf128.c: New file.
* sysdeps/ieee754/float128/s_cbrtf128.c: New file.
* sysdeps/ieee754/float128/s_ceilf128.c: New file.
* sysdeps/ieee754/float128/s_copysignf128.c: New file.
* sysdeps/ieee754/float128/s_cosf128.c: New file.
* sysdeps/ieee754/float128/s_erff128.c: New file.
* sysdeps/ieee754/float128/s_expm1f128.c: New file.
* sysdeps/ieee754/float128/s_fabsf128.c: New file.
* sysdeps/ieee754/float128/s_finitef128.c: New file.
* sysdeps/ieee754/float128/s_floorf128.c: New file.
* sysdeps/ieee754/float128/s_fmaf128.c: New file.
* sysdeps/ieee754/float128/s_fpclassifyf128.c: New file.
* sysdeps/ieee754/float128/s_frexpf128.c: New file.
* sysdeps/ieee754/float128/s_fromfpf128.c: New file.
* sysdeps/ieee754/float128/s_fromfpxf128.c: New file.
* sysdeps/ieee754/float128/s_getpayloadf128.c: New file.
* sysdeps/ieee754/float128/s_isinff128.c: New file.
* sysdeps/ieee754/float128/s_isnanf128.c: New file.
* sysdeps/ieee754/float128/s_issignalingf128.c: New file.
* sysdeps/ieee754/float128/s_llrintf128.c: New file.
* sysdeps/ieee754/float128/s_llroundf128.c: New file.
* sysdeps/ieee754/float128/s_log1pf128.c: New file.
* sysdeps/ieee754/float128/s_logbf128.c: New file.
* sysdeps/ieee754/float128/s_lrintf128.c: New file.
* sysdeps/ieee754/float128/s_lroundf128.c: New file.
* sysdeps/ieee754/float128/s_modff128.c: New file.
* sysdeps/ieee754/float128/s_nearbyintf128.c: New file.
* sysdeps/ieee754/float128/s_nextafterf128.c: New file.
* sysdeps/ieee754/float128/s_nexttowardf128.c: New file.
* sysdeps/ieee754/float128/s_nextupf128.c: New file.
* sysdeps/ieee754/float128/s_remquof128.c: New file.
* sysdeps/ieee754/float128/s_rintf128.c: New file.
* sysdeps/ieee754/float128/s_roundevenf128.c: New file.
* sysdeps/ieee754/float128/s_roundf128.c: New file.
* sysdeps/ieee754/float128/s_scalblnf128.c: New file.
* sysdeps/ieee754/float128/s_scalbnf128.c: New file.
* sysdeps/ieee754/float128/s_setpayloadf128.c: New file.
* sysdeps/ieee754/float128/s_setpayloadsigf128.c: New file.
* sysdeps/ieee754/float128/s_signbitf128.c: New file.
* sysdeps/ieee754/float128/s_significandf128.c: New file.
* sysdeps/ieee754/float128/s_sincosf128.c: New file.
* sysdeps/ieee754/float128/s_sinf128.c: New file.
* sysdeps/ieee754/float128/s_tanf128.c: New file.
* sysdeps/ieee754/float128/s_tanhf128.c: New file.
* sysdeps/ieee754/float128/s_totalorderf128.c: New file.
* sysdeps/ieee754/float128/s_totalordermagf128.c: New file.
* sysdeps/ieee754/float128/s_truncf128.c: New file.
* sysdeps/ieee754/float128/s_ufromfpf128.c: New file.
* sysdeps/ieee754/float128/s_ufromfpxf128.c: New file.
* sysdeps/ieee754/float128/t_sincosf128.c: New file.
* sysdeps/ieee754/float128/x2y2m1f128.c: New file.
* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h:
(__iscanonicalf128): Define as a macro.
I just noticed that the array count for the hwcap flags list in ARM is
off by 10, i.e. 37 instead of 27. Following patch fixes this.
* sysdeps/unix/sysv/linux/arm/dl-procinfo.c
(_dl_arm_cap_flags): Fix array subscript.
* sysdeps/unix/sysv/linux/arm/dl-procinfo.h (_DL_HWCAP_COUNT):
Fix count.
Remove is_intel, is_amd and max_cpuid macros. Use __get_cpu_features
to get cpu_features instead.
* sysdeps/x86/cacheinfo.c (is_intel): Removed.
(is_amd): Likewise.
(max_cpuid): Likewise.
(__cache_sysconf): Use __get_cpu_features to get cpu_features.
(init_cacheinfo): Likewise.
The various sys/ucontext.h headers include <signal.h> and all the
headers split out of <bits/sigstack.h>. (Except that the powerpc
version does not include <signal.h>.)
None of the standard versions defining ucontext.h require or permit
such inclusions; rather, they all say that the stack_t and sigset_t
types from signal.h are defined. This patch fixes the headers to
include just the bits/ headers for those types (and the existing
includes of bits/sigcontext.h). Since bits/types/sigset_t.h is now
being included instead of bits/types/__sigset_t.h, __sigset_t uses in
the headers are replaced by direct use of the public sigset_t type.
sysdeps/unix/sysv/linux/x86/bits/sigcontext.h was relying on the prior
inclusion of <signal.h> to define types such as __uint32_t, so gets a
bits/types.h include added to provide those types.
Although one could keep some or all of the includes under a __USE_MISC
conditional, that seems unnecessary to me, especially given the lack
of a <signal.h> include in the powerpc version meaning that portable
programs already cannot rely on such an include.
Tested for x86_64 and x86, and with build-many-glibcs.py. As with
other such fixes, more namespace issues remain so this does not permit
any XFAILs to be removed or bugs to be closed.
[BZ #21457]
* sysdeps/arm/sys/ucontext.h: Do not include <signal.h>,
<bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/generic/sys/ucontext.h: Do not include <signal.h>,
<bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/i386/sys/ucontext.h: Do not include <signal.h>,
<bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/m68k/sys/ucontext.h: Do not include <signal.h>,
<bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/mips/sys/ucontext.h: Do not include <signal.h>,
<bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h>.
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include
<bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>.
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
* sysdeps/unix/sysv/linux/x86/bits/sigcontext.h: Include
<bits/types.h>.
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include
<signal.h>, <bits/sigstack.h>, <bits/types/struct_sigstack.h> or
<bits/ss_flags.h>. Include <bits/types/sigset_t.h> instead of
<bits/types/__sigset_t.h>.
(ucontext_t): Use sigset_t instead of __sigset_t.
siginfo-arch.h is included in two different places, so the default
definitions of the macros that it might or might not define need to
be done conditionally afterward, not unconditionally beforehand.
* sysdeps/unix/sysv/linux/bits/siginfo-consts.h
(__SI_ASYNCIO_AFTER_SIGIO): Define default after including
bits/siginfo-arch.h, only if not already defined.
* sysdeps/unix/sysv/linux/bits/types/siginfo_t.h
(__SI_ALIGNMENT, __SI_BAND_TYPE, __SI_CLOCK_T)
(__SI_ERRNO_THEN_CODE, __SI_HAVE_SIGSYS, __SI_SEGFAULT_ADDL):
Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h:
Unconditionally define __SI_* macros.
David Miller has not been shot yet AFAIK (yes, I googled for any news
that may seem relevant and I poked him on twitter some days ago) so
either nobody uses SPARC or the code is correct or nobody read the
instructions in the comment to shoot him. In all of those cases the
comment is clearly not useful, so getting rid of it.
The types affected are __sig_atomic_t, sig_atomic_t, __sigset_t,
sigset_t, sigval_t, sigevent_t, and siginfo_t. __sig_atomic_t is a
scalar, so it's now directly available from bits/types.h. The others
get bits/types/ headers.
Side effects include: There have been small changes to which
non-signal headers expose which subset of the signal-related types.
A couple of architectures' nested siginfo_t fields had to be renamed
to prevent undesired macro expansion. Internal code that wants to
manipulate signal masks must now include <sigsetops.h> (which is not
installed) and should be aware that __sigaddset, __sigandset,
__sigdelset, __sigemptyset, and __sigorset no longer return a value
(unlike the public API). Relatedly, the public signal.h no longer
declares any of those functions. The obsolete sigmask() macro no
longer has a system-specific definition -- in the cases where it
matters, it didn't work anyway.
New Linux architectures should create bits/siginfo-arch.h and/or
bits/siginfo-consts-arch.h to customize their siginfo_t, rather than
duplicating everything in bits/siginfo.h (which no longer exists).
Add new __SI_* macros if necessary. Ports to other operating systems
are strongly encouraged to generalize this scheme further.
* bits/sigevent-consts.h
* bits/siginfo-consts.h
* bits/types/__sigset_t.h
* bits/types/sigevent_t.h
* bits/types/siginfo_t.h
* sysdeps/unix/sysv/linux/bits/sigevent-consts.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts.h
* sysdeps/unix/sysv/linux/bits/types/__sigset_t.h
* sysdeps/unix/sysv/linux/bits/types/sigevent_t.h
* sysdeps/unix/sysv/linux/bits/types/siginfo_t.h:
New system-dependent bits headers.
* sysdeps/unix/sysv/linux/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h:
New Linux-only system-dependent bits headers.
* signal/bits/types/sig_atomic_t.h
* signal/bits/types/sigset_t.h
* signal/bits/types/sigval_t.h:
New non-system-dependent bits headers.
* sysdeps/generic/sigsetops.h
* sysdeps/unix/sysv/linux/sigsetops.h:
New internal headers.
* include/bits/types/sig_atomic_t.h
* include/bits/types/sigset_t.h
* include/bits/types/sigval_t.h:
New wrappers.
* signal/sigsetops.h
* bits/siginfo.h
* bits/sigset.h
* sysdeps/unix/sysv/linux/bits/siginfo.h
* sysdeps/unix/sysv/linux/bits/sigset.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo.h
* sysdeps/unix/sysv/linux/s390/bits/siginfo.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo.h:
Deleted.
* signal/Makefile, sysdeps/unix/sysv/linux/Makefile:
Update lists of installed headers.
* posix/bits/types.h: Define __sig_atomic_t here.
* signal/signal.h: Use the new bits headers; no need to handle
__need_sig_atomic_t nor __need_sigset_t. Don't use __sigmask
to define sigmask.
* include/signal.h: No need to handle __need_sig_atomic_t
nor __need_sigset_t. Don't define __sigemptyset.
* io/sys/poll.h, setjmp/setjmp.h
* sysdeps/arm/sys/ucontext.h, sysdeps/generic/sys/ucontext.h
* sysdeps/i386/sys/ucontext.h, sysdeps/m68k/sys/ucontext.h
* sysdeps/mach/hurd/i386/bits/sigcontext.h
* sysdeps/mips/sys/ucontext.h, sysdeps/powerpc/novmxsetjmp.h
* sysdeps/pthread/bits/sigthread.h
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h:
Use bits/types/__sigset_t.h.
* misc/sys/select.h, posix/spawn.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/sys/epoll.h
* sysdeps/unix/sysv/linux/sys/signalfd.h:
Use bits/types/sigset_t.h.
* resolv/netdb.h, rt/mqueue.h: Use bits/types/sigevent_t.h.
* rt/aio.h: Use bits/types/sigevent_t.h and bits/sigevent-consts.h.
* socket/sys/socket.h: Don't include bits/sigset.h.
* login/utmp_file.c, shadow/lckpwdf.c, signal/sigandset.c
* signal/sigisempty.c, stdlib/abort.c, sysdeps/posix/profil.c
* sysdeps/posix/sigignore.c, sysdeps/posix/sigintr.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c
* sysdeps/posix/sprofil.c, sysdeps/posix/sysv_signal.c
* sysdeps/unix/sysv/linux/nptl-signals.h:
Include sigsetops.h.
* signal/sigaddset.c, signal/sigandset.c, signal/sigdelset.c
* signal/sigorset.c, stdlib/abort.c, sysdeps/posix/sigignore.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c:
__sigaddset, __sigandset, __sigdelset, __sigemptyset, __sigorset
now return no value.
* signal/sigaddset.c, signal/sigdelset.c, signal/sigismem.c
Include <errno.h>, <signal.h>, and <sigsetops.h> instead of
"sigsetops.h".
* signal/sigsetops.c: Explicitly define __sigismember,
__sigaddset, and __sigdelset as compatibility symbols.
* signal/Versions: Correct commentary on __sigpause,
__sigaddset, __sigdelset, __sigismember.
* inet/rcmd.c: Include sigsetops.h. Convert old code using
__sigblock/__sigsetmask to use __sigprocmask and friends.
This semi-mechanical patch removes all uses and definitions of the
sfi_breg, sfi_pld, and sfi_sp macros from various ARM-specific
assembly files. These were only used by NaCl.
* sysdeps/arm/sysdep.h
(ARM_SFI_MACROS, sfi_breg, sfi_pld, sfi_sp): Delete definitions.
* sysdeps/arm/__longjmp.S, sysdeps/arm/add_n.S
* sysdeps/arm/addmul_1.S, sysdeps/arm/arm-mcount.S
* sysdeps/arm/armv6/rawmemchr.S, sysdeps/arm/armv6/strchr.S
* sysdeps/arm/armv6/strcpy.S, sysdeps/arm/armv6/strlen.S
* sysdeps/arm/armv6/strrchr.S, sysdeps/arm/armv6t2/memchr.S
* sysdeps/arm/armv6t2/strlen.S
* sysdeps/arm/armv7/multiarch/memcpy_impl.S
* sysdeps/arm/armv7/strcmp.S, sysdeps/arm/dl-tlsdesc.S
* sysdeps/arm/memcpy.S, sysdeps/arm/memmove.S
* sysdeps/arm/memset.S, sysdeps/arm/setjmp.S
* sysdeps/arm/strlen.S, sysdeps/arm/submul_1.S:
Remove all uses of sfi_breg, sfi_pld, and sfi_sp.
The NaCl port has not been actively maintained since before the 2.25
release. The complementary GCC back-end was never contributed to GCC,
and we are given to understand that the current NaCl SDK has switched
to Clang and therefore cannot be used to build glibc anymore, so we
doubt that the port remains useful.
This commit simply removes the sysdeps/arm/nacl and sysdeps/nacl
directories and the abi-tags entry.
Remove the NaCl port.
* abi-tags: Remove .*-.*-nacl.* entry.
* sysdeps/arm/nacl: Remove directory and contents.
* sysdeps/nacl: Likewise.
errno.texi documents error macros, their values, and error strings in
Texinfo @comments, some of which are also used for @standards. The
purpose of this commit is to separate the standards from the error
strings so that both the @standards conversion script picks up clean
@standards and the errno documentation framework is improved.
The error names, values, and messages are consolidated in a new custom
macro, @errno. It is not clear that scripts within the sources rely
on the special Texinfo @comment-based format to generate files used
throughout the library, so the definition of @errno in macros.texi now
provides a comment indicating the dependency. The dependent scripts
are updated to use @errno, which also simplifies them a bit. The
files those scripts generate were verified to be unchanged.
The @errno macro is not visibly rendered in any way at this time, but
it does use an @cindex command to add the error string to the Concept
Index, to facilitate searching on error messages.
* manual/errno.texi: Convert @comment-based errno
documentation to @errno.
* manual/macros.texi (@errno): New macro. Consolidate errors,
their values, and messages, adding the error string to the
Concept Index. Provide a warning in the comment about
external (to the manual) dependencies.
* sysdeps/gnu/errlist.awk: Use @errno instead of @comments.
* sysdeps/mach/hurd/errnos.awk: Likewise.
bits/sigstack.h contains four things: the legacy struct sigstack type,
the preferred stack_t type, the SS_* enum values and macros for signal
stack sizes.
These vary in different ways between glibc configurations; in
particular, the stack sizes vary much more than any of the other
pieces. Furthermore, these pieces have different standard namespace
rules for when they should be visible (not currently visible in
conform/ results both because the relevant tests are XFAILed for
sys/ucontext.h namespace issues, and because some of the expectations
are incorrect in the same way as the headers, e.g. neither
expectations nor headers reflect that current POSIX no longer has
either the sigstack function or the sigstack structure).
To reduce duplication of identical definitions, and facilitate
namespace fixes without requiring the same feature test macro
conditions to be repeated in many versions of the same header, this
patch splits bits/sigstack.h up into four headers. It keeps the stack
size macros, while new bits/types/struct_sigstack.h,
bits/types/stack_t.h and bits/ss_flags.h are added for the other
pieces. bits/types/struct_sigstack.h is the same everywhere,
bits/types/stack_t.h has three variants different in the order of the
structure elements (generic = MIPS Linux, and other Linux), and
bits/ss_flags.h has generic and Linux variants.
This patch includes the new headers everywhere that included
<bits/sigstack.h>, so should cause no difference to what any public
header defines. Subsequent namespace fixes would then remove or
condition some of those includes.
There should be no conflicts with Zack's changes to signal.h types,
beyond the trivial conflict of both making additions to
signal/Makefile's headers list; the two patches affect disjoint sets
of types and other definitions.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* bits/ss_flags.h: New file.
* bits/types/stack_t.h: Likewise.
* include/bits/types/struct_sigstack.h: Likewise.
* signal/bits/types/struct_sigstack.h: Likewise.
* sysdeps/unix/sysv/linux/bits/ss_flags.h: Likewise.
* sysdeps/unix/sysv/linux/bits/types/stack_t.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/types/stack_t.h: Likewise.
* signal/Makefile (headers): Add bits/types/struct_sigstack.h,
bits/types/stack_t.h and bits/ss_flags.h.
* signal/signal.h [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]:
Include <bits/types/struct_sigstack.h>, <bits/types/stack_t.h> and
<bits/ss_flags.h>.
* bits/sigstack.h (struct sigstack): Remove.
(stack_t): Likewise.
(SS_ONSTACK): Likewise.
(SS_DISABLE): Likewise.
* sysdeps/unix/sysv/linux/aarch64/bits/sigstack.h
(struct sigstack): Likewise.
(stack_t): Likewise.
(SS_ONSTACK): Likewise.
(SS_DISABLE): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/sigstack.h (struct sigstack):
Likewise.
(stack_t): Likewise.
(SS_ONSTACK): Likewise.
(SS_DISABLE): Likewise.
* sysdeps/unix/sysv/linux/bits/sigstack.h (struct sigstack):
Likewise.
(stack_t): Likewise.
(SS_ONSTACK): Likewise.
(SS_DISABLE): Likewise.
* sysdeps/unix/sysv/linux/mips/bits/sigstack.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/sigstack.h (struct sigstack):
Likewise.
(stack_t): Likewise.
(SS_ONSTACK): Likewise.
(SS_DISABLE): Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/sigstack.h
(struct sigstack): Likewise.
(stack_t): Likewise.
(SS_ONSTACK): Likewise.
(SS_DISABLE): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/sigstack.h (struct sigstack):
Likewise.
(stack_t): Likewise.
(SS_ONSTACK): Likewise.
(SS_DISABLE): Likewise.
* sysdeps/arm/sys/ucontext.h: Include
<bits/types/struct_sigstack.h>, <bits/types/stack_t.h> and
<bits/ss_flags.h>.
* sysdeps/generic/sys/ucontext.h: Likewise.
* sysdeps/i386/sys/ucontext.h: Likewise.
* sysdeps/m68k/sys/ucontext.h: Likewise.
* sysdeps/mips/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Likewise.
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Likewise.
SSE2 memchr computes "edx + ecx - 16" where ecx is less than 16. Use
"edx - (16 - ecx)", instead of satured math, to avoid possible addition
overflow. This replaces
add %ecx, %edx
sbb %eax, %eax
or %eax, %edx
sub $16, %edx
with
neg %ecx
add $16, %ecx
sub %ecx, %edx
It is the same for x86_64, except for rcx/rdx, instead of ecx/edx.
* sysdeps/i386/i686/multiarch/memchr-sse2.S (MEMCHR): Use
"edx + ecx - 16" to avoid possible addition overflow.
* sysdeps/x86_64/memchr.S (memchr): Likewise.
Commits ecade1c, afbbc18, and a5a34d2 added compiler flags for
vmsplice, splice, and open_by_handle_at respectively on default
misc/Makefile. However such symbols are build only for Linux and
the rules should on linux Makefile only.
Checked on x86_64-linux-gnu.
* misc/Makefile (CFLAGS-vmsplice.c): Remove rule.
(CFLAGS-splice.c): Likewise.
(CFLAGS-open_by_handle_at.c): Likewise.
* sysdeps/unix/sysv/linux/Makefile (CFLAGS-vmsplice.c): New rule.
(CFLAGS-splice.c): Likewise.
(CFLAGS-open_by_handle_at.c): Likewise.
This patch makes the glibc build generate an additional header
ldbl-compat-choose.h that defines LONG_DOUBLE_COMPAT_CHOOSE_* macros
for each libc and libm symbol, which select one or the other of their
arguments based on whether the symbol was added before a change to
long double != double.
The effect of this is that it is then possible to define a macro
maybe_long_double_symbol that automatically acts as either
long_double_symbol or weak_alias depending on when the symbol being
defined was added. This can be used when building long double
functions from type-generic templates. Thus, with this patch ldbl-opt
no longer needs special long double implementations of each new libm
function added using such a template, and the existing such
implementations are removed.
This is a step towards being able more generally to use common macros
to create all the aliases needed for a libm function, so reducing the
amount of special-case code needed in ldbl-opt and ldbl-64-128, and
facilitating subsequently adding *f32 / *f64 / *f128 / *f32x / *f64x
aliases to existing functions (where the set of aliases that a
function should have may depend on the architecture in various ways).
Tested with build-many-glibcs.py. Except for on
powerpc64le-linux-gnu, installed stripped shared libraries are
unchanged by the patch. powerpc64le-linux-gnu is the unique
configuration which used ldbl-opt from the start rather than adding a
new long double choice after originally only having had long double =
double. The effect of the patch there is that various cases that
previously used long_double_symbol unconditionally now use weak_alias
instead, so .os files contain e.g. a symbol cabsl instead of
cabsl@@GLIBC_2.17. The final dynamic symbols and versions in the
resulting shared libraries are unchanged (ABI tests pass), as is the
disassembly of the shared libraries, but the differences in the .os
files still result in different .gnu_hash contents in libm.so; the
differences are of no significance and logically using weak_alias is
what's most appropriate in those cases.
* scripts/versions.awk: Generate ldbl-compat-choose.h.
* sysdeps/ieee754/ldbl-opt/math-type-macros-ldouble.h: Include
<ldbl-compat-choose.h>.
(maybe_long_double_symbol): New macro.
[!declare_mgen_alias] (declare_mgen_alias): Use
maybe_long_double_symbol.
* sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Remove.
* sysdeps/ieee754/ldbl-opt/s_fmaxmagl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_fminmagl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_nextdownl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise.
* Makerules [$(build-shared) = yes && !avoid-generated]
(before-compile): Add $(common-objpfx)ldbl-compat-choose.h.
[$(build-shared) = yes && !avoid-generated]
($(common-objpfx)ldbl-compat-choose.h): New target.
This patch arranges for the glibc build to generate a header
first-versions.h that defines macros for the earliest symbol version
in which each public symbol (GLIBC_[0-9]* symbol version, name only
uses C identifier characters) is available.
This is used in sysdeps/ieee754/ldbl-opt/math-type-macros-double.h to
replace the manually defined LDOUBLE_*_libm_version macros for various
functions defined using type-generic templates, the purpose of which
is to use in LONG_DOUBLE_COMPAT tests "was this function originally
added before glibc supported long double != double on this platform?".
As discussed in
<https://sourceware.org/ml/libc-alpha/2016-12/msg00246.html>, I expect
this to be useful more generally in reducing the amount of
special-case code needed in ldbl-opt and ldbl-64-128.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* scripts/versions.awk: Generate first-versions.h.
* sysdeps/ieee754/ldbl-opt/math-type-macros-double.h: Include
<first-versions.h>.
(LDOUBLE_cabsl_libm_version): Remove macro.
(LDOUBLE_cargl_libm_version): Likewise.
(LDOUBLE_cimagl_libm_version): Likewise.
(LDOUBLE_conjl_libm_version): Likewise.
(LDOUBLE_creall_libm_version): Likewise.
(LDOUBLE_cacosl_libm_version): Likewise.
(LDOUBLE_cacoshl_libm_version): Likewise.
(LDOUBLE_ccosl_libm_version): Likewise.
(LDOUBLE_ccoshl_libm_version): Likewise.
(LDOUBLE_casinl_libm_version): Likewise.
(LDOUBLE_csinl_libm_version): Likewise.
(LDOUBLE_casinhl_libm_version): Likewise.
(LDOUBLE_csinhl_libm_version): Likewise.
(LDOUBLE_catanl_libm_version): Likewise.
(LDOUBLE_catanhl_libm_version): Likewise.
(LDOUBLE_ctanl_libm_version): Likewise.
(LDOUBLE_ctanhl_libm_version): Likewise.
(LDOUBLE_cexpl_libm_version): Likewise.
(LDOUBLE_clogl_libm_version): Likewise.
(LDOUBLE_cprojl_libm_version): Likewise.
(LDOUBLE_csqrtl_libm_version): Likewise.
(LDOUBLE_cpowl_libm_version): Likewise.
(LDOUBLE_clog10l_libm_version): Likewise.
(LDOUBLE___clog10l_libm_version): Likewise.
(LDOUBLE_fdiml_libm_version): Likewise.
(LDOUBLE_fmaxl_libm_version): Likewise.
(LDOUBLE_fminl_libm_version): Likewise.
(LDOUBLE_ilogbl_libm_version): Likewise.
(LDOUBLE_nanl_libm_version): Likewise.
[!M_LIBM_NEED_COMPAT] (M_LIBM_NEED_COMPAT): Use
FIRST_VERSION_libm_* macros.
[!declare_mgen_libm_compat] (declare_mgen_libm_compat): Likewise.
* Makerules [$(build-shared) = yes && !avoid-generated]
(before-compile): Add $(common-objpfx)first-versions.h.
[$(build-shared) = yes && !avoid-generated]
($(common-objpfx)first-versions.h): New target.
($(common-objpfx)sysd-versions): Depend on and change to rule for
building $(common-objpfx)versions.stmp.
This patch consolidates the mq_timedsend Linux syscall generation
on sysdeps/unix/sysv/linux/mq_timedsend.c. It basically removes it
from architecture auto-generation list.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* rt/Makefile (CFLAGS-mq_timedsend.c): New flag.
* sysdeps/unix/sysv/linux/mq_timedsend.c: New file.
* sysdeps/unix/sysv/linux/syscalls.list (mq_timedsend): Remove from
auto-generation list.
This patch consolidates the mq_timedreceive Linux syscall generation
on sysdeps/unix/sysv/linux/mq_timedreceive.c. It basically removes it
from architecture auto-generation list.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* rt/Makefile (CFLAGS-mq_timedreceive.c): New flag.
* sysdeps/unix/sysv/linux/mq_timedreceive.c: New file.
* sysdeps/unix/sysv/linux/syscalls.list (mq_timedreceive): Remove
from auto-generation list.
This patch consolidates the open_by_handle_at Linux syscall generation on
sysdeps/unix/sysv/linux/open_by_handle_at.c. It basically removes it from
architectures auto-generation list.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Add
open_by_handle_at.
(CFLAGS-open_by_handle_at.c): New flag.
* sysdeps/unix/sysv/linux/open_by_handle_at.c: New file.
* sysdeps/unix/sysv/linux/syscalls.list (open_by_handle_at): New
file.
* misc/Makefile (CFLAGS-open_by_handle_at.c): New rule.
This patch consolidates the splice Linux syscall generation on
sysdeps/unix/sysv/linux/splice.c. It basically removes it from
architectures auto-generation list.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Add splice.
(CFLAGS-splice.c): New flag.
* sysdeps/unix/sysv/linux/splice.c: New file.
* sysdeps/unix/sysv/linux/syscalls.list (splice): Remove from
auto-generation syscall list.
* misc/Makefile (CFLAGS-splice.c): New rule.
This patch consolidates the vmsplice Linux syscall generation on
sysdeps/unix/sysv/linux/vmsplice.c. It basically removes it from
architectures auto-generation list.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (CFLAGS-vmsplice.c): New flag.
* sysdeps/unix/sysv/linux/syscalls.list (vmsplice): Remove from
auto-generation syscall list.
* sysdeps/unix/sysv/linux/vmsplice.c: New file.
* misc/Makefile (CFLAGS-vmsplice.c): New rule.
This patch consolidates the fsync Linux syscall generation on
sysdeps/unix/sysv/linux/fsync.c. It basically removes it from
architectures auto-generation list.
For arm it also removes the __errno_location call since fsync
is not called with SYSCALL_CANCEL with call arch-specific
INLINE_SYSCALL macro which in turn will call __set_errno macro
(and setting errno directly).
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* misc/Makefile (CFLAGS-fsync.c): New flag.
* nptl/Makefile (CFLAGS-fsync.c): Likewise.
* sysdeps/unix/syscalls.list (fsync): Remove from auto-generation
syscall list.
* sysdeps/unix/sysv/linux/fsync.c: New file.
* sysdeps/unix/sysv/linux/arm/localplt.data [libpthread.so]
(__errno_location): Remove.
This patch consolidates the fdatasync Linux syscall generation on
sysdeps/unix/sysv/linux/fdatasync.c. It basically removes it from
architectures auto-generation list.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* misc/makefile (CFLAGS-datasync.c): New flag.
* nptl/makefile (CFLAGS-datasync.c): Likewise.
* sysdeps/unix/sysv/linux/syscalls.list (fdatasync): Remove from
auto-generation syscall list.
* sysdeps/unix/sysv/linux/fdatasync.c: New file.
This patch consolidates the msync Linux syscall generation on
sysdeps/unix/sysv/linux/msync.c. It basically removes it from
architectures auto-generation list.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* misc/Makefile (CFLAGS-msync.c): New rule.
* nptl/Makefile (CFLAGS-msync.c): Likewise.
* sysdeps/unix/syscalls.list: Remove msync from auto-generation list.
* sysdeps/unix/sysv/linux/msync.c: New file.
This patch consolidates the sigsuspend Linux syscall generation on
sysdeps/unix/sysv/linux/sigsuspend.c. It basically removes the alpha
assembly version which call the old sigsusped interface using only
the first doubleword from sigset. Current minimum supported kernel
on alpha (3.2) enforces rt_sigsuspend on the architecture
(__ARCH_WANT_SYS_RT_SIGSUSPEND option on kernel), so it is possible
to use the default implementation.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* sysdeps/unix/sysv/linux/alpha/sigsuspend.S: Remove file.
* sysdeps/unix/sysv/linux/sigsuspend.c: Simplify include list.
* nptl/Makefile (CFLAGS-sigsuspend.c): New rule.
* sysdeps/unix/sysv/linux/sparc/sparc64/Makefile
(CFLAGS-sigsuspend.c): Remove rule.
This patch consolidates the tee Linux syscall generation on
sysdeps/unix/sysv/linux/tee.c. It basically removes it from
architectures auto-generation list.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdeps_routines): Add tee.
(CFLAGS-tee.c): New rule.
* sysdeps/unix/sysv/linux/syscalls.list: Remove tee from
auto-generated list.
* sysdeps/unix/sysv/linux/tee.c: New file.
This patch consolidates the nanosleep Linux syscall generation on
sysdeps/unix/sysv/linux/nanosleep.c. It basically removes it from
architectures auto-generation list.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* nptl/Makefile (CFLAGS-nanosleep.c): New rule.
* posix/Makefile (CFLAGS-nanosleep.c): Likewise.
* sysdeps/unix/sysv/linux/nanosleep.c: New file.
* sysdeps/unix/sysv/linux/syscalls.list: Remove nanosleep from
auto-generated list.
This patch consolidates the waitpid Linux syscall generation on
sysdeps/unix/sysv/linux/waitpid.c. It basically removes it from
architecture auto-generation list and also remove arch specific
implementations.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/sh/syscalls.list: Remove waitpid from
auto-generated list.
* sysdeps/unix/sysv/linux/m68k/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/syscalls.list: Remove file.
* sysdeps/unix/sysv/linux/tile/waitpid.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/syscalls.list: Likewise.
This patch consolidates the pause Linux implementation on
sysdeps/unix/sysv/linux/pause.c. If defined the pause syscall
(__NR_pause) will be used, other ppoll with 0 arguments will be
used instead.
It has the small advantage of generic pause implementation with
uses rt_sigprocmask plus rt_sigsuspend because it requires only
one syscall and the pause is done atomically regarding signal
handling (for instance, pause may not be interrupted if the
signal arrives between the rt_sigprocmask and rt_sigsuspend
syscall).
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* sysdeps/unix/sysv/linux/generic/pause.c: Remove file.
* sysdeps/unix/sysv/linux/sparc/sparc64/pause.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h [__arch64__]
(__NR_pause): Undefine.
* sysdeps/unix/sysv/linux/pause.c: New file.
* sysdeps/unix/sysv/linux/syscalls.list: Remove pause from
auto-generation list.
This implementation is based on the one already used at
sysdeps/powerpc/powerpc64/fpu/multiarch/s_sinf-power8.S.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
[$(subdir) = math] (libm-sysdep_routines): Add s_cosf-power8 and
s_cosf-ppc64.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_cosf-power8.S: New file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_cosf-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_cosf.c: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_cosf.S: Likewise.
This patch converts the implementation of exp2l in math/e_exp2l.c into
a template in math/e_exp2_template.c, then adjusts Makefile to use
this template for long double (the implementations for float and
double in sysdeps have higher precedence and are not used). This
template can also be used for float128, thus reducing the amount of
duplicated code that gets added when adding support the new type.
Tested for powerpc64le and s390x.
* math/Makefile (libm-calls): Move e_exp2F to gen-libm-calls.
(gen-libm-calls): Add e_exp2F to use the template.
* math/e_exp2l.c: Rename to math/e_exp2_template.c.
* math/e_exp2_template.c: New file, renamed from
math/e_exp2l.c, and made into a template.
* sysdeps/generic/math-type-macros.h (M_MIN_EXP): New macro.
Currently all architectures but microblaze use wire-up syscall for
p{readv,write}v. Microblaze still uses the syscall emulation using
sysdep/posix/p{readv,writev}.c and it was reported in some ocasions
[1] [2] that it might have some issues with some linux specific
usage (mainly with O_DIRECT and the alignment requirement).
Although it is not an issue for virtually all the system, this
patch refactors the sysdeps/posix p{read,write}v syscall to avoid
such issue (by using posix_memalign on the buffer used on
p{read,write} call) and by refactoring it common files to avoid
the need check on defines to correct set the alias and internal
symbols.
Checked on microblaze-linux-gnu check with run-built-tests=no and
by using the sysdeps/posix implementation on x86_64-linux-gnu (just
for sanity test where it shown no regression).
* sysdeps/posix/preadv.c: Use sysdeps/posix/preadv_common.c.
* sysdeps/posix/preadv64.c: Likewise.
* sysdeps/unix/sysv/linux/preadv.c: Likewise.
* sysdeps/unix/sysv/linux/preadv64.c: Likewise.
* sysdeps/posix/pwritev.c: Use sysdeps/posix/pwritev_common.c.
* sysdeps/posix/pwritev64.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev64.c: Likewise.
* sysdeps/posix/preadv_common.c: New file.
* sysdeps/posix/pwritev_common.c: Likewise.
[1] http://www.mail-archive.com/qemu-devel@nongnu.org/msg25282.html
[2] https://bugzilla.redhat.com/show_bug.cgi?id=563103#c8
The templates for the IEEE functions wrappers implement wrappers that
do not rely on _LIB_VERSION / matherr / __kernel_standard
functionality to set errno and fix the return value of the functions.
The wrappers are ready to be used by all floating-point types, however
they will first be used by float128, since the old wrappers for float,
double, and long double need to be first deprecated and versioned.
This commits defines __USE_WRAPPER_TEMPLATE to 1 for float128 files,
so that the new wrapper templates are used for this type.
* sysdeps/generic/math-type-macros-float128.h
(__USE_WRAPPER_TEMPLATE): Define to 1 to enable use of the
wrapper templates.
