Static PIE extends address space layout randomization to static
executables. It provides additional security hardening benefits at
the cost of some memory and performance.
Dynamic linker, ld.so, is a standalone program which can be loaded at
any address. This patch adds a configure option, --enable-static-pie,
to embed the part of ld.so in static executable to create static position
independent executable (static PIE). A static PIE is similar to static
executable, but can be loaded at any address without help from a dynamic
linker. When --enable-static-pie is used to configure glibc, libc.a is
built as PIE and all static executables, including tests, are built as
static PIE. The resulting libc.a can be used together with GCC 8 or
above to build static PIE with the compiler option, -static-pie. But
GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC
with PIE support is needed. When an older GCC is used to build glibc
with --enable-static-pie, proper input files are passed to linker to
create static executables as static PIE, together with "-z text" to
prevent dynamic relocations in read-only segments, which are not allowed
in static PIE.
The following changes are made for static PIE:
1. Add a new function, _dl_relocate_static_pie, to:
a. Get the run-time load address.
b. Read the dynamic section.
c. Perform dynamic relocations.
Dynamic linker also performs these steps. But static PIE doesn't load
any shared objects.
2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in
libc.a. crt1.o, which is used to create dynamic and non-PIE static
executables, is updated to include a dummy _dl_relocate_static_pie.
rcrt1.o is added to create static PIE, which will link in the real
_dl_relocate_static_pie. grcrt1.o is also added to create static PIE
with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for
static PIE.
Static PIE can work on all architectures which support PIE, provided:
1. Target must support accessing of local functions without dynamic
relocations, which is needed in start.S to call __libc_start_main with
function addresses of __libc_csu_init, __libc_csu_fini and main. All
functions in static PIE are local functions. If PIE start.S can't reach
main () defined in a shared object, the code sequence:
pass address of local_main to __libc_start_main
...
local_main:
tail call to main via PLT
can be used.
2. start.S is updated to check PIC instead SHARED for PIC code path and
avoid dynamic relocation, when PIC is defined and SHARED isn't defined,
to support static PIE.
3. All assembly codes are updated check PIC instead SHARED for PIC code
path to avoid dynamic relocations in read-only sections.
4. All assembly codes are updated check SHARED instead PIC for static
symbol name.
5. elf_machine_load_address in dl-machine.h are updated to support static
PIE.
6. __brk works without TLS nor dynamic relocations in read-only section
so that it can be used by __libc_setup_tls to initializes TLS in static
PIE.
NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled
with -fPIE, regardless if --enable-static-pie is used to configure glibc.
When glibc is configured with --enable-static-pie, libc.a is compiled
with -fPIE, regardless whether GCC defaults to PIE or not. The same
libc.a can be used to build both static executable and static PIE.
There is no need for separate PIE copy of libc.a.
On x86-64, the normal static sln:
text data bss dec hex filename
625425 8284 5456 639165 9c0bd elf/sln
the static PIE sln:
text data bss dec hex filename
657626 20636 5392 683654 a6e86 elf/sln
The code size is increased by 5% and the binary size is increased by 7%.
Linker requirements to build glibc with --enable-static-pie:
1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from
static PIE.
2. Linker can create working static PIE. The x86-64 linker needs the
fix for
https://sourceware.org/bugzilla/show_bug.cgi?id=21782
The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax"
to "leal main@GOTOFF(%ebx), %eax" if main is defined locally.
Binutils 2.29 or above are OK for i686 and x86-64. But linker status for
other targets need to be verified.
3. Linker should resolve undefined weak symbols to 0 in static PIE:
https://sourceware.org/bugzilla/show_bug.cgi?id=22269
4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS
relocations, which should check bfd_link_executable instead:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Tested on aarch64, i686 and x86-64.
Using GCC 7 and binutils master branch, build-many-glibcs.py with
--enable-static-pie with all patches for static PIE applied have the
following build successes:
PASS: glibcs-aarch64_be-linux-gnu build
PASS: glibcs-aarch64-linux-gnu build
PASS: glibcs-armeb-linux-gnueabi-be8 build
PASS: glibcs-armeb-linux-gnueabi build
PASS: glibcs-armeb-linux-gnueabihf-be8 build
PASS: glibcs-armeb-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabi build
PASS: glibcs-arm-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabihf-v7a build
PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build
PASS: glibcs-m68k-linux-gnu build
PASS: glibcs-microblazeel-linux-gnu build
PASS: glibcs-microblaze-linux-gnu build
PASS: glibcs-mips64el-linux-gnu-n32 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n32-soft build
PASS: glibcs-mips64el-linux-gnu-n64 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n64-soft build
PASS: glibcs-mips64-linux-gnu-n32 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n32-soft build
PASS: glibcs-mips64-linux-gnu-n64 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n64-soft build
PASS: glibcs-mipsel-linux-gnu build
PASS: glibcs-mipsel-linux-gnu-nan2008 build
PASS: glibcs-mipsel-linux-gnu-nan2008-soft build
PASS: glibcs-mipsel-linux-gnu-soft build
PASS: glibcs-mips-linux-gnu build
PASS: glibcs-mips-linux-gnu-nan2008 build
PASS: glibcs-mips-linux-gnu-nan2008-soft build
PASS: glibcs-mips-linux-gnu-soft build
PASS: glibcs-nios2-linux-gnu build
PASS: glibcs-powerpc64le-linux-gnu build
PASS: glibcs-powerpc64-linux-gnu build
PASS: glibcs-tilegxbe-linux-gnu-32 build
PASS: glibcs-tilegxbe-linux-gnu build
PASS: glibcs-tilegx-linux-gnu-32 build
PASS: glibcs-tilegx-linux-gnu build
PASS: glibcs-tilepro-linux-gnu build
and the following build failures:
FAIL: glibcs-alpha-linux-gnu build
elf/sln is failed to link due to:
assertion fail bfd/elf64-alpha.c:4125
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-hppa-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
https://sourceware.org/bugzilla/show_bug.cgi?id=22537
FAIL: glibcs-ia64-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
FAIL: glibcs-powerpc-linux-gnu build
FAIL: glibcs-powerpc-linux-gnu-soft build
FAIL: glibcs-powerpc-linux-gnuspe build
FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22264
FAIL: glibcs-powerpc-linux-gnu-power4 build
elf/sln is failed to link due to:
findlocale.c:96:(.text+0x22c): @local call to ifunc memchr
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-s390-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped
assertion fail bfd/elflink.c:14299
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-sh3eb-linux-gnu build
FAIL: glibcs-sh3-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu-soft build
FAIL: glibcs-sh4-linux-gnu build
FAIL: glibcs-sh4-linux-gnu-soft build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS
code sequence expected by ld:
https://sourceware.org/bugzilla/show_bug.cgi?id=22270
FAIL: glibcs-sparc64-linux-gnu build
FAIL: glibcs-sparcv9-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu-32 build
FAIL: glibcs-tilegx-linux-gnu build
FAIL: glibcs-tilegx-linux-gnu-32 build
FAIL: glibcs-tilepro-linux-gnu build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
[BZ #19574]
* INSTALL: Regenerated.
* Makeconfig (real-static-start-installed-name): New.
(pic-default): Updated for --enable-static-pie.
(pie-default): New for --enable-static-pie.
(default-pie-ldflag): Likewise.
(+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F))
with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)).
Replace $(static-start-installed-name) with
$(real-static-start-installed-name).
(+prectorT): Updated for --enable-static-pie.
(+postctorT): Likewise.
(CFLAGS-.o): Add $(pie-default).
(CFLAGS-.op): Likewise.
* NEWS: Mention --enable-static-pie.
* config.h.in (ENABLE_STATIC_PIE): New.
* configure.ac (--enable-static-pie): New configure option.
(have-no-dynamic-linker): New LIBC_CONFIG_VAR.
(have-static-pie): Likewise.
Enable static PIE if linker supports --no-dynamic-linker.
(ENABLE_STATIC_PIE): New AC_DEFINE.
(enable-static-pie): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* csu/Makefile (omit-deps): Add r$(start-installed-name) and
gr$(start-installed-name) for --enable-static-pie.
(extra-objs): Likewise.
(install-lib): Likewise.
(extra-objs): Add static-reloc.o and static-reloc.os
($(objpfx)$(start-installed-name)): Also depend on
$(objpfx)static-reloc.o.
($(objpfx)r$(start-installed-name)): New.
($(objpfx)g$(start-installed-name)): Also depend on
$(objpfx)static-reloc.os.
($(objpfx)gr$(start-installed-name)): New.
* csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie
in libc.a.
* csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to
initimage.
* csu/static-reloc.c: New file.
* elf/Makefile (routines): Add dl-reloc-static-pie.
(elide-routines.os): Likewise.
(DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed.
(tst-tls1-static-non-pie-no-pie): New.
* elf/dl-reloc-static-pie.c: New file.
* elf/dl-support.c (_dl_get_dl_main_map): New function.
* elf/dynamic-link.h (ELF_DURING_STARTUP): Also check
STATIC_PIE_BOOTSTRAP.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* gmon/Makefile (tests): Add tst-gmon-static-pie.
(tests-static): Likewise.
(DEFAULT-LDFLAGS-tst-gmon-static): Removed.
(tst-gmon-static-no-pie): New.
(CFLAGS-tst-gmon-static-pie.c): Likewise.
(CRT-tst-gmon-static-pie): Likewise.
(tst-gmon-static-pie-ENV): Likewise.
(tests-special): Likewise.
($(objpfx)tst-gmon-static-pie.out): Likewise.
(clean-tst-gmon-static-pie-data): Likewise.
($(objpfx)tst-gmon-static-pie-gprof.out): Likewise.
* gmon/tst-gmon-static-pie.c: New file.
* manual/install.texi: Document --enable-static-pie.
* sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New.
(_dl_get_dl_main_map): Likewise.
* sysdeps/i386/configure.ac: Check if linker supports static PIE.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default).
(ASFLAGS-.op): Likewise.
On i386, when multi-arch is enabled, all external functions must be
called via PIC PLT in PIE, which requires setting up EBX register,
since they may be IFUNC functions.
* config.h.in (NO_HIDDEN_EXTERN_FUNC_IN_PIE): New.
* include/libc-symbols.h (__hidden_proto_hiddenattr): Add check
for PIC and NO_HIDDEN_EXTERN_FUNC_IN_PIE.
* sysdeps/i386/configure.ac (NO_HIDDEN_EXTERN_FUNC_IN_PIE): New
AC_DEFINE if multi-arch is enabled.
* sysdeps/i386/configure: Regenerated.
All calls to functions with the internal_function attribute
have been removed from assembler implementations, which means that
the definition of internal_function can be changed at the C level
without causing ABI issues with assembler code.
_dl_fixup still uses a regparm calling convention on i386, but this
is controlled through ARCH_FIXUP_ATTRIBUTE, not internal_function.
There are configure tests for the cpuid.h header for x86 / x86_64.
GCC 4.3 and later install this header, so those tests are obsolete.
This patch removes them.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* sysdeps/i386/configure.ac (cpuid.h): Do not test for header.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure.ac (cpuid.h): Do not test for header.
* sysdeps/x86_64/configure: Regenerated.
There are configure tests for the -mavx2 compiler option. AVX2
support was added in GCC 4.7, so these tests are now obsolete; this
patch removes them.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* sysdeps/i386/configure.ac (libc_cv_cc_avx2): Remove configure
test.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure.ac (libc_cv_cc_avx2): Remove configure
test.
* sysdeps/x86_64/configure: Regenerated.
* config.h.in (HAVE_AVX2_SUPPORT): Remove #undef.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memset-avx2 unconditionally instead of conditionally on
[$(config-cflags-avx2) = yes].
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list) [HAVE_AVX2_SUPPORT]: Make code
unconditional.
* sysdeps/x86_64/multiarch/memset.S [HAVE_AVX2_SUPPORT]: Likewise.
* sysdeps/x86_64/multiarch/memset_chk.S
[IS_IN (libc) && SHARED && HAVE_AVX2_SUPPORT]: Change conditional
to [IS_IN (libc) && SHARED].
There is a configure test for assembler support for -mtune=i686. This
option was added in binutils 2.18 so the test is obsolete; this patch
removes it.
Tested for x86 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/i386/configure.ac (libc_cv_as_i686): Remove configure
test.
* sysdeps/i386/configure: Regenerated.
* sysdeps/i386/i686/Makefile [$(config-asflags-i686) = yes]: Make
code unconditional.
GCC added support for -mno-vzeroupper in version 4.6. Thus the
configure tests for this support are obsolete, and this patch removes
them.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by this patch).
* sysdeps/i386/configure.ac (libc_cv_cc_novzeroupper): Remove
configure test.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure.ac (libc_cv_cc_novzeroupper): Remove
configure test.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/Makefile [$(config-cflags-novzeroupper) = yes]:
Make code unconditional.
GCC added support for -msse4 in version 4.3. Thus the configure tests
for it are obsolete, and this patch removes them.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by this patch).
* sysdeps/i386/configure.ac (libc_cv_cc_sse4): Remove configure
test.
* sysdeps/i386/configure: Regenerated.
* sysdeps/i386/i686/multiarch/Makefile
[$(config-cflags-sse4) = yes]: Make code unconditional.
* sysdeps/i386/i686/multiarch/strcspn.S [HAVE_SSE4_SUPPORT]:
Likewise.
* sysdeps/i386/i686/multiarch/strspn.S [HAVE_SSE4_SUPPORT]:
Likewise.
* sysdeps/x86_64/configure.ac (libc_cv_cc_sse4): Remove configure
test.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/multiarch/Makefile [$(config-cflags-sse4) = yes]:
Make code unconditional.
* sysdeps/x86_64/multiarch/strcspn.S [HAVE_SSE4_SUPPORT]:
Likewise.
* sysdeps/x86_64/multiarch/strspn.S [HAVE_SSE4_SUPPORT]: Likewise.
* config.h.in (HAVE_SSE4_SUPPORT): Remove #undef.
We need to save/restore bound registers and add a BND prefix before
branches in _dl_runtime_profile so that bound registers for pointer
pass and return are preserved when LD_AUDIT is used.
[BZ #18134]
* sysdeps/i386/configure.ac: Set HAVE_MPX_SUPPORT.
* sysdeps/i386/configure: Regenerated.
* sysdeps/i386/dl-trampoline.S (PRESERVE_BND_REGS_PREFIX): New.
(_dl_runtime_profile): Save and restore Intel MPX return bound
registers when calling _dl_call_pltexit. Add
PRESERVE_BND_REGS_PREFIX before return.
* sysdeps/i386/link-defines.sym (LRV_BND0_OFFSET): New.
(LRV_BND1_OFFSET): Likewise.
* sysdeps/x86/bits/link.h (La_i86_retval): Add lrv_bnd0 and
lrv_bnd1.
* sysdeps/x86_64/dl-trampoline.S (_dl_runtime_profile): Fix
typo in bndmov encoding.
* sysdeps/x86_64/dl-trampoline.h: Properly save and restore
Intel MPX bound registers. Add PRESERVE_BND_REGS_PREFIX before
branch instructions to preserve bounds.
* config.h.in (HAVE_AVX2_SUPPORT): New #undef.
* sysdeps/i386/configure.ac: Set HAVE_AVX2_SUPPORT and
config-cflags-avx2.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memset-avx2 only if config-cflags-avx2 is yes.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list):
Tests for memset_chk and memset only if HAVE_AVX2_SUPPORT is
defined.
* sysdeps/x86_64/multiarch/memset.S: Define multiple versions
only if HAVE_AVX2_SUPPORT is defined.
* sysdeps/x86_64/multiarch/memset_chk.S: Likewise.
This patch moves the USE_REGPARMS define from the toplevel
configure.ac to sysdeps/i386/configure.ac.
Tested x86 that the disassembly of installed shared libraries is
unchanged by this patch.
* configure.ac (USE_REGPARMS): Don't define here.
* configure: Regenerated.
* sysdeps/i386/configure.ac (USE_REGPARMS): Define here.
* sysdeps/i386/configure: Regenerated.
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
We no longer support configuring for i386, nor do we
elide such a configuration to i686. Configuring with
i386-* is a failure, and we provide an example of
how to fix that.
---
2013-04-17 Carlos O'Donell <carlos@redhat.com>
* configure.in: Remove i386 configure warning. Remove i386 case.
* configure: Regenerate.
* sysdeps/i386/configure.in: Raise error if config_machine is i386.
Add example to error message.
* sysdeps/i386/configure: Regenerate.
This change does two things:
* Treats a target i386-* as if it were i686.
* Fails configure if the user is generating code
for i386.
We no longer support i386 code-generation because the i386
lacks the atomic operations we need in glibc.
You can still configure for i386-*, but you get i686 code.
You can't build with --march=i386, --mtune=i386 or a compiler
that defaults to i386 code-generation.
I've added two i386 entries in the master todo list to discuss
merging and renaming:
http://sourceware.org/glibc/wiki/Development_Todo/Master#i386
The failure modes are fail-safe here. You compile for i386,
get i686, and try to run on i386 and it fails. The configure
log has a warning saying we elided to i686. There is no situation
that I can see where we run into any serious problems.
The patch makes the current state better in that we get less
confused users and we build successfully in more default
configurations.
The next enhancement would be to add --march=i?86
as suggested in #c20 of BZ#10062 for any i?86-* builds, which
would solve the problem of a 32-bit compiler that defaults to
i386 code-gen and glibc configured for i686-* target. Which
previously failed at build time, and now will fail at configure
time (requires adding --march=i686).
Updated NEWS with BZ #10060 and #10062.
No regressions.
---
2013-04-06 Carlos O'Donell <carlos@redhat.com>
[BZ #10060, #10062]
* aclocal.m4 (LIBC_COMPILER_BUILTIN_INLINED): New macro.
* sysdeps/i386/configure.in: Use LIBC_COMPILER_BUILTIN_INLINED and
fail configure if __sync_val_compare_and_swap is not inlined.
* sysdeps/i386/configure: Regenerate.
* configure.in: Build for i686 when configured for i386.
* configure: Regenerate.
* README: Remove i386 reference.
Pretty sure we require recent enough versions of gcc/binutils to make this
check pointless. I can't any logs in the last few years where this check
didn't return "yes".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
(_dl_out_of_memory): Use rtld_hidden_proto.
* elf/dl-error.c (_dl_out_of_memory): Use rtld_hidden_data_def.
(_dl_signal_error): Don't use INTUSE on _dl_out_of_memory.
* elf/dl-open.c (_dl_open): Likewise.
* elf/dl-deps.c (_dl_map_object_deps): Likewise.
* sunrpc/des_impl.c (des_set_key): Make first argument unsigned char *.
* elf/dl-addr.c (_dl_addr): Add a cast.
* elf/unload3mod4.c: Declare foo.
* elf/testobj2.c: Include <stdio.h>.
* sysdeps/gnu/errlist.awk: Emit NERR macro for _sys_nerr_internal
value constant, and use it in the defn.
* sysdeps/gnu/errlist-compat.awk: Use NERR in array decl.
Use actual size for compat array decls.
* config.make.in (cc-mtune): New substituted variable.
* configure.in (libc_cv_cc_mtune): New test for -mtune= switch,
done only if libc_mtune_example is defined.
* configure: Regenerated.
* sysdeps/i386/configure.in (libc_mtune_example): Set it.
* sysdeps/i386/configure: Regenerated.
* sysdeps/i386/Makefile (CFLAGS-initfini.s): Use $(cc-mtune).
