* manual/examples/strncat.c: Remove.
This example was misleading, as the code would have undefined
behavior if "hello" was longer than SIZE. Anyway, the manual
shouldn't encourage strncpy+strncat for this sort of thing.
* manual/string.texi (Copying Strings and Arrays): Split into
three sections Copying Strings and Arrays, Concatenating Strings,
and Truncating Strings, as this section was way too long. All
cross-referenced changed. Add advice about string-truncation
functions. Remove misleading strncat example.
NSS modules which can run in disconnected modes should
return NSS_STATUS_NOTFOUND and SUCCESS in order to follow
best practice for such modules and ensure user applications
can have these modules configured without causing problems
if the data sources are not connected.
Update __STDC_ISO_10646__ to 201505L for Unicode 8.0.0.
Update character encoding, ctype, and transliteration tables.
New scripts autogenerate transliteration tables.
- Remove duplicate transliterations for U+0152 and U+0153 from
C-translit.h.in.
- Change Ö U+00D6 LATIN CAPITAL LETTER O WITH STROKE → O
(instead of → OE)
- Change ö U+00F6 LATIN SMALL LETTER O WITH STROKE → o
(instead of → oe)
- Add ₹ U+20B9 INDIAN RUPEE SIGN → INR
- Add ₫ U+20AB DONG SIGN → Dong (in addition to "₫ → Đồng")
- Add many others from
http://unicode.org/cldr/trac/browser/trunk/common/transforms/Latin-ASCII.xml
- Add some more currency signs suggested by Marko Myllynen
- Add another patch with more characters by Marko Myllynen
The ldbl-128ibm implementation of logl is inaccurate for arguments
near 1, because when deciding whether to bypass a series expansion for
log(1+z), where z = x-1, it compares the square of z rather than z
itself with an epsilon value. This patch fixes that comparison, so
eliminating the test failures for inaccuracy of logl in such cases.
Tested for powerpc.
[BZ #19351]
* sysdeps/ieee754/ldbl-128ibm/e_logl.c (__ieee754_logl): When
expanding log(1+z), compare z rather than its square with epsilon
to determine when to avoid evaluating the expansion.
The ldbl-128ibm implementation of sinhl uses a slightly too small
overflow threshold (similar to bug 16407 for coshl). This patch fixes
it to use a safe threshold (so that values whose high part is above
the value compared with definitely result in an overflow in all
rounding modes).
Tested for powerpc.
[BZ #19350]
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c (__ieee754_sinhl):
Increase overflow threshold.
The ldbl-128ibm implementation of tanhl is inaccurate for small
arguments, because it returns x*(1+x) (maybe in an attempt to raise
"inexact") when x itself would be the accurate return value but
multiplying by 1+x introduces large errors. This patch fixes it to
return x in that case (when the mathematical result is x plus a
negligible remainder on the order of x^3) to avoid those errors.
Tested for powerpc.
[BZ #19349]
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c (__tanhl): Return argument
when small.
Now that we have __ASSUME_* macros for direct socket syscalls to use
them instead of socketcall when they can be assumed to be available on
socketcall architectures, this patch defines those macros when
appropriate for i386, m68k, microblaze and sh (for 4.3, 4.3, all
supported kernels and 2.6.37, respectively; the only use of socketcall
support on microblaze is it allows accept4 and sendmmsg to be
supported on a wider range of kernel versions).
David, it seems that 32-bit SPARC is the only architecture supported
by glibc that still lacks these direct syscalls. It would be good to
get them added to the SPARC kernel so we can eventually eliminate
socketcall support in glibc (and thereby just use entries in
sysdeps/unix/syscalls.list for most of these functions) when we can
assume new-enough kernels.
Tested for i386 (testsuite, and that installed shared libraries are
unchanged by this patch - not using a new enough kernel, so this
doesn't actually test much, but the i386 and m68k code is essentially
the same as that already in use for s390).
* sysdeps/unix/sysv/linux/i386/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SOCKET_SYSCALL):
New macro.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_BIND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_CONNECT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_ACCEPT4_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDTO_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVFROM_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SHUTDOWN_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SOCKET_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_BIND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_CONNECT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_ACCEPT4_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDTO_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SENDMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVFROM_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300]
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_RECVMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040300] (__ASSUME_SHUTDOWN_SYSCALL):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_SOCKET_SYSCALL): Likewise.
(__ASSUME_BIND_SYSCALL): Likewise.
(__ASSUME_CONNECT_SYSCALL): Likewise.
(__ASSUME_LISTEN_SYSCALL): Likewise.
(__ASSUME_ACCEPT_SYSCALL): Likewise.
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
(__ASSUME_SEND_SYSCALL): Likewise.
(__ASSUME_SENDTO_SYSCALL): Likewise.
(__ASSUME_RECV_SYSCALL): Likewise.
(__ASSUME_RECVFROM_SYSCALL): Likewise.
(__ASSUME_SHUTDOWN_SYSCALL): Likewise.
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
(__ASSUME_SENDMSG_SYSCALL): Likewise.
(__ASSUME_RECVMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SOCKET_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_BIND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_CONNECT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_ACCEPT_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_GETSOCKNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_GETPEERNAME_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_SOCKETPAIR_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SEND_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SENDTO_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_RECV_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_RECVFROM_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SHUTDOWN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_GETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_SENDMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x020625] (__ASSUME_RECVMSG_SYSCALL):
Likewise.
On MIPS when the toolchain is using the O32 FPXX ABI, the testsuite
fails to build for pre-R2 CPU.
It assumes that it is possible to use the -mfp64 option to build
tst-abi-fp64amod and tst-abi-fp64mod, while this requires a CPU which
supports the mfhc1 and mthc1 instructions, ie at least a R2 CPU:
error: '-mgp32' and '-mfp64' can only be combined if the target
supports the mfhc1 and mthc1 instructions
The same way it assumes that it is possible to use the -modd-spreg option
to build tst-abi-fpxxomod and tst-abi-fp64mod, while this requires at
least a R1 CPU:
warning: the 'mips2' architecture does not support odd
single-precision registers
This patches changes that by checking the usability of -mfp64 and
-modd-spreg options in configure, and disable those tests when they can
not be used.
Commit cf06a4e3 removed test-xfail-POSIX2008/unistd.h/linknamespace, but
left one basename namespace issue in grantpt. However this issue is not
visible with the default configuration buy only when configure is passed
the --enable-pt_chown option.
The ffs and ffsll functions were listed as math functions when they
are actually defined in strings.h and string.h respectively. Shuffle
around the Makefile variables a bit and make a separate space for ffs
and ffsll.
The sincos benchmark has only about a dozen inputs that don't measure
the impact of changes to various passes. Since much of the code
properties are inherited from sin and cos, copy those inputs in to get
more comprehensive coverage.
This patch allows to use x86_64 vector math functions with GCC 6.*
without OpenMP SIMD constructs. For additional details please visit
<https://sourceware.org/glibc/wiki/libmvec#Example_2>.
* sysdeps/x86/fpu/bits/math-vector.h: W/o -fopenmp declare vector math
functions with GCC 6.* __attribute__ ((__simd__)).
* manual/string.texi (Copying and Concatenation): Fix typos in
sample implementations of strncat and wcsncat, by having them use
the old value of the destination length, not the new one.
The nan, nanf and nanl functions handle payload strings by doing e.g.:
if (tagp[0] != '\0')
{
char buf[6 + strlen (tagp)];
sprintf (buf, "NAN(%s)", tagp);
return strtod (buf, NULL);
}
This is an unbounded stack allocation based on the length of the
argument. Furthermore, if the argument starts with an n-char-sequence
followed by ')', that n-char-sequence is wrongly treated as
significant for determining the payload of the resulting NaN, when ISO
C says the call should be equivalent to strtod ("NAN", NULL), without
being affected by that initial n-char-sequence. This patch fixes both
those problems by using the __strtod_nan etc. functions recently
factored out of strtod etc. for that purpose, with those functions
being exported from libc at version GLIBC_PRIVATE.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16961]
[BZ #16962]
* math/s_nan.c (__nan): Use __strtod_nan instead of constructing a
string on the stack for strtod.
* math/s_nanf.c (__nanf): Use __strtof_nan instead of constructing
a string on the stack for strtof.
* math/s_nanl.c (__nanl): Use __strtold_nan instead of
constructing a string on the stack for strtold.
* stdlib/Versions (libc): Add __strtof_nan, __strtod_nan and
__strtold_nan to GLIBC_PRIVATE.
* math/test-nan-overflow.c: New file.
* math/test-nan-payload.c: Likewise.
* math/Makefile (tests): Add test-nan-overflow and
test-nan-payload.
* manual/string.texi (String and Array Utilities):
Distinguish more carefully among bytes, multibyte characters,
and wide characters. Use "byte" when talking about C 'char',
to distinguish it more clearly from multibyte characters.
Say "wide character" or "multibyte character" instead of
"character", when a wide or multibyte character is intended.
Similarly for "multibyte string" versus "string".
Define these terms more carefully.
If a platform does not define "long-double-fcts = yes" in its
Makefiles and it does define __NO_LONG_DOUBLE_MATH in its installed
headers, it will currently create exported symbols for __finitel,
__isinfl, and __isnanl that can't be reached from userspace by
correct use of the finite(), isinf(), or isnan() macros in <math.h>.
To avoid this situation, by default for such platforms we now no
longer export these symbols, thus causing appropriate link-time
errors. However, for platforms that previously exported these
symbols, we continue to do so as compat symbols; this is enabled
by adding LDBL_CLASSIFY_COMPAT to math_private.h for the platform.
For tile, remove the now-unnecessary exports of those functions from
libc and libm.
This patch adds a new feature for powerpc. In order to get faster access to
the HWCAP/HWCAP2 bits and platform number (i.e. for implementing
__builtin_cpu_is () / __builtin_cpu_supports () in GCC) without the overhead of
reading from the auxiliary vector, we now reserve space for them in the TCB.
This is an ABI change for GLIBC 2.23.
A new versioned symbol '__parse_hwcap_and_convert_at_platform' is available to
get the data from the auxiliary vector and parse it, and store it for later use
in the TLS initialization code. This function is called very early
(in _dl_sysdep_start () via DL_PLATFORM_INFO for the dynamic linking case, and
in __libc_start_main () for the static linking case) to make sure the data is
available at the time of TLS initialization.
* sysdeps/powerpc/Makefile (sysdep-dl-routines): Add hwcapinfo.
(sysdep_routines): Likewise.
(sysdep-rtld-routines): Likewise.
[$(subdir) = nptl](tests): Add test-get_hwcap and test-get_hwcap-static
[$(subdir) = nptl](tests-static): test-get_hwcap-static
* sysdeps/powerpc/Versions: Added new
__parse_hwcap_and_convert_at_platform symbol to GLIBC-2.23.
* sysdeps/powerpc/hwcapinfo.c: New file.
(__tcb_parse_hwcap_and_convert_at_platform): New function to initialize
and parse hwcap, hwcap2 and platform number information.
* sysdeps/powerpc/hwcapinfo.h: New file. Creates global variables
to store HWCAP+HWCAP2 and platform number.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Added new offsets
for HWCAP+HWCAP2 and platform number in the TCB.
* sysdeps/powerpc/nptl/tls.h: New functionality. Stores
the HWCAP, HWCAP2 and platform number in the TCB.
(dtv): Added new fields for HWCAP+HWCAP2 and platform number.
(TLS_INIT_TP): Included calls to add the hwcap and
at_platform values in the TCB in TP initialization.
(TLS_DEFINE_INIT_TP): Likewise.
(THREAD_GET_HWCAP): New macro.
(THREAD_SET_HWCAP): Likewise.
(THREAD_GET_AT_PLATFORM): Likewise.
(THREAD_SET_AT_PLATFORM): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h:
(dl_platform_init): New function that calls
__parse_hwcap_and_convert_at_platform for the dymanic linking case for
powerpc32.
* sysdeps/powerpc/powerpc64/dl-machine.h: Likewise, for powerpc64.
* sysdeps/powerpc/test-get_hwcap-static.c: New file. Testcase for
this functionality, static linking case.
* sysdeps/powerpc/test-get_hwcap.c: New file. Likewise, dynamic
linking case.
* sysdeps/unix/sysv/linux/powerpc/libc-start.c: Added call to
__parse_hwcap_and_convert_at_platform for the static linking case.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist:
Included the new __parse_hwcap_and_convert_at_platform symbol in the
ABI list for GLIBC 2.23.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist:
Likewise.
Add comments for IBM930, IBM933, IBM935, IBM937, and IBM939 which
explain exactly what purpose these encodings have and provide a URL to
the upstream IBM database that further provides the details of the
encoding.
The tst-cancel20 open two pipes and creates a thread which blocks
reading the first pipe. It then issues a signal to activate the
signal handler which in turn blocks reading the second pipe end.
Finally the cancellation cleanup-up handlers are tested by first
closing the all the pipes ends and issuing a pthread_cancel.
The tst-cancel21 have a similar behavior, but use an extra fork
after the test itself.
The race condition occurs if the cancellation handling acts after the
pipe close: in this case read will return EOF (indicating side-effects)
and thus the cancellation must not act. However current GLIBC
cancellation behavior acts regardless the syscalls returns with
sid-effects.
This patch adjust the test by moving the pipe closing after the
cancellation handling. This avoid spurious cancellation if the case
of the race described.
Checked on x86_64 and i386.
* nptl/tst-cancel20.c (do_one_test): Move the pipe closing after
pthread_join.
* nptl/tst-cancel21.c (tf): Likewise.
Since x86-64 and x32 use the same set of sched_XXX system call interface:
[hjl@gnu-6 linux-stable]$ grep sched_
arch/x86/entry/syscalls/syscall_64.tbl
24 common sched_yield sys_sched_yield
142 common sched_setparam sys_sched_setparam
143 common sched_getparam sys_sched_getparam
144 common sched_setscheduler sys_sched_setscheduler
145 common sched_getscheduler sys_sched_getscheduler
146 common sched_get_priority_max sys_sched_get_priority_max
147 common sched_get_priority_min sys_sched_get_priority_min
148 common sched_rr_get_interval sys_sched_rr_get_interval
203 common sched_setaffinity sys_sched_setaffinity
204 common sched_getaffinity sys_sched_getaffinity
314 common sched_setattr sys_sched_setattr
315 common sched_getattr sys_sched_getattr
[hjl@gnu-6 linux-stable]$
__cpu_mask should be unsigned long long, instead of unsigned long, for
x32. This patch adds __CPU_MASK_TYPE so that each architecture can
define the proper type for __cpu_mask.
[BZ #19313]
* bits/typesizes.h (__CPU_MASK_TYPE): New.
* sysdeps/mach/hurd/bits/typesizes.h (__CPU_MASK_TYPE): Likewise.
* sysdeps/nacl/bits/typesizes.h (__CPU_MASK_TYPE): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h (__CPU_MASK_TYPE):
Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h (__CPU_MASK_TYPE):
* sysdeps/unix/sysv/linux/bits/sched.h (__cpu_mask): Replace
unsigned long int with __CPU_MASK_TYPE.
Various sysdeps/ieee754/dbl-64 functions use double constants defined
using a union between a double and two ints, with separate big-endian
and little-endian definitions of the constants.
With modern C, this is unnecessary complication; hex float constants
(or __builtin_inf etc.) suffice to specify the exact value desired,
and so can avoid separate versions for each endianness. Having this
complication also complicates cleanups such as removing slow paths
from these library functions, as they need to make sure to remove both
copies of variables that are no longer used after such a cleanup (and
in at least one case, proper removal of a slow path will also involve
removing slow-path-only values from the middle of an array - an array
with both big-endian and little-endian copies - and adjusting other
references to that array).
So it makes sense to clean up the code to define these constants using
hex floats and so eliminate the endianness conditional. This patch
does so in the case of sqrt, where the two constants are such that it
makes sense just to put them directly in the code using them and
eliminate the names for them altogether.
Tested for arm (the code generated for sqrt does change, though not in
any significant way).
* sysdeps/ieee754/dbl-64/e_sqrt.c: Do not include uroot.h.
(__ieee754_sqrt): Use hex float constants instead of tm256.x and
t512.x.
* sysdeps/ieee754/dbl-64/uroot.h: Remove file.
AMD CPUs uses the similar encoding scheme for extended family and model
as Intel CPUs as shown in:
http://support.amd.com/TechDocs/25481.pdf
This patch updates get_common_indeces to get family and model for both
Intel and AMD CPUs when family == 0x0f.
[BZ #19214]
* sysdeps/x86/cpu-features.c (get_common_indeces): Add an
argument to return extended model. Update family and model
with extended family and model when family == 0x0f.
(init_cpu_features): Updated.
The RPC interface used by mmap uses the unsigned vm_offset_t, not the
signed off_t, so 32bit bigger than 2GiB values are fine actually.
* sysdeps/mach/hurd/mmap64.c: New file.
Revision 3.50 of the MIPS architecture defined FCSR ABS2008 and NAN2008
bits as optionally read/write [1][2]. No hardware implementation has
ever made use of this feature though. For example the first processor
to implement these bits, the MIPS32r3 proAptiv core, has both bits
read-only, hardwired to 1 [3]. And as from revision 5.03 of the MIPS
architecture the bits are required to be read-only, preset by hardware
[4][5]. Additionally all hardware implementations in existence have the
bits hardwired both to the same value, either of `0' and `1'.
These bits may still be read/write or hardwired to opposite values in
simulated hardware implementations such as QEMU or the FPU emulator
included with the Linux kernel. However to match real hardware
implementations the Linux kernel will set FCSR ABS2008 and NAN2008 bits
both to the same value where possible, reflecting the setting of the
EF_MIPS_NAN2008 ELF file header bit.
Therefore update the bit patterns in macro definitions we use for the
control word, in the 2008-NaN encoding mode, so that both bits have the
same value in a given bit pattern. Additionally mark the FCSR ABS2008
bit as reserved, so that high-level calls to change the control word do
not affect the bit.
This covers the regular FPU configurations, only leaving exotic corner
cases with the value of FCSR control word initially set by the kernel
different to what our code thinks it is. To address the remaining cases
the AT_FPUCW auxiliary vector entry would have to be implemented in the
Linux kernel, which currently is not.
References:
[1] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS32 Architecture", MIPS Technologies, Inc., Document Number:
MD00082, Revision 3.50, September 20, 2012, Table 5.5 "FCSR Register
Field Descriptions", p. 80
[2] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS64 Architecture", MIPS Technologies, Inc., Document Number:
MD00083, Revision 3.50, September 20, 2012, Table 5.5 "FCSR Register
Field Descriptions", p. 82
[3] "MIPS32 proAptiv Multiprocessing System Software User's Manual",
MIPS Technologies, Inc., Document Number: MD00878, Revision 01.22,
May 14, 2013, Table 12.10 "FCSR Bit Field Descriptions", p. 570
[4] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS32 Architecture", MIPS Technologies, Inc., Document Number:
MD00082, Revision 5.03, Sept. 9, 2013, Table 5.7 "FCSR Register
Field Descriptions", p. 82
[5] "MIPS Architecture For Programmers, Volume I-A: Introduction to the
MIPS64 Architecture", MIPS Technologies, Inc., Document Number:
MD00083, Revision 5.03, Sept. 9, 2013, Table 5.7 "FCSR Register
Field Descriptions", p. 84
* sysdeps/mips/fpu_control.h (_FPU_RESERVED): Include ABS2008.
(_FPU_DEFAULT, _FPU_IEEE) [__mips_nan2008]: Set ABS2008.
In preparation to fix the --localedir configure argument we must
move the existing conflicting definition of localedir to a more
appropriate name. Given that all current internal uses of localedir
relate to the compiled locales we rename to complocaledir.
Old workaround based on assembly aliases can lead to link fail (bug 19058).
This patch makes workaround in another way to avoid it.
[BZ #19058]
* math/Makefile ($(inst_libdir)/libm.so): Added libmvec_nonshared.a
to AS_NEEDED.
* sysdeps/x86/fpu/bits/math-vector.h: Removed code with old workaround.
* sysdeps/x86_64/fpu/Makefile (libmvec-support,
libmvec-static-only-routines): Added new file.
* sysdeps/x86_64/fpu/svml_finite_alias.S: New file.
The nan* functions handle their string argument by constructing a
NAN(...) string on the stack as a VLA and passing it to strtod
functions.
This approach has problems discussed in bug 16961 and bug 16962: the
stack usage is unbounded, and it gives incorrect results in certain
cases where the argument is not a valid n-char-sequence.
The natural fix for both issues is to refactor the NaN payload parsing
out of strtod into a separate function that the nan* functions can
call directly, so that no temporary string needs constructing on the
stack at all. This patch does that refactoring in preparation for
fixing those bugs (but without actually using the new functions from
nan* - which will also require exporting them from libc at version
GLIBC_PRIVATE). This patch is not intended to change any user-visible
behavior, so no tests are added (fixes for the above bugs will of
course add tests for them).
This patch builds on my recent fixes for strtol and strtod issues in
Turkish locales. Given those fixes, the parsing of NaN payloads is
locale-independent; thus, the new functions do not need to take a
locale_t argument.
Tested for x86_64, x86, mips64 and powerpc.
* stdlib/strtod_nan.c: New file.
* stdlib/strtod_nan_double.h: Likewise.
* stdlib/strtod_nan_float.h: Likewise.
* stdlib/strtod_nan_main.c: Likewise.
* stdlib/strtod_nan_narrow.h: Likewise.
* stdlib/strtod_nan_wide.h: Likewise.
* stdlib/strtof_nan.c: Likewise.
* stdlib/strtold_nan.c: Likewise.
* sysdeps/ieee754/ldbl-128/strtod_nan_ldouble.h: Likewise.
* sysdeps/ieee754/ldbl-128ibm/strtod_nan_ldouble.h: Likewise.
* sysdeps/ieee754/ldbl-96/strtod_nan_ldouble.h: Likewise.
* wcsmbs/wcstod_nan.c: Likewise.
* wcsmbs/wcstof_nan.c: Likewise.
* wcsmbs/wcstold_nan.c: Likewise.
* stdlib/Makefile (routines): Add strtof_nan, strtod_nan and
strtold_nan.
* wcsmbs/Makefile (routines): Add wcstod_nan, wcstold_nan and
wcstof_nan.
* include/stdlib.h (__strtof_nan): Declare and use
libc_hidden_proto.
(__strtod_nan): Likewise.
(__strtold_nan): Likewise.
(__wcstof_nan): Likewise.
(__wcstod_nan): Likewise.
(__wcstold_nan): Likewise.
* include/wchar.h (____wcstoull_l_internal): Declare.
* stdlib/strtod_l.c: Do not include <ieee754.h>.
(____strtoull_l_internal): Remove declaration.
(STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
(STRTOULL): Likewise.
(____STRTOF_INTERNAL): Use STRTOF_NAN to parse NaN payload.
* stdlib/strtof_l.c (____strtoull_l_internal): Remove declaration.
(STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-128/strtold_l.c (STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c (STRTOF_NAN): Define
macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-64-128/strtold_l.c (STRTOF_NAN): Define
macro.
(SET_MANTISSA): Remove macro.
* sysdeps/ieee754/ldbl-96/strtold_l.c (STRTOF_NAN): Define macro.
(SET_MANTISSA): Remove macro.
* wcsmbs/wcstod_l.c (____wcstoull_l_internal): Remove declaration.
* wcsmbs/wcstof_l.c (____wcstoull_l_internal): Likewise.
* wcsmbs/wcstold_l.c (____wcstoull_l_internal): Likewise.
The implementations of strtod and related functions use
locale-specific conversions to lower case when parsing the contents of
a string NAN(n-char-sequence_opt). This has the consequence that
NAN(I) is not treated as being of that form (only the initial NAN part
is accepted). The syntax of n-char-sequence directly maps to the
ASCII letters, digits and underscore as in identifiers, so it is
unambiguous that all ASCII letters must be accepted in all locales.
This patch, relative to a tree with
<https://sourceware.org/ml/libc-alpha/2015-11/msg00258.html> (pending
review) applied and depending on that patch, fixes this problem by
checking directly for ASCII letters. This will have the side effect
of no longer accepting 'İ' (dotted 'I') inside NAN() in Turkish
locales, which seems appropriate (that letter wouldn't have been
interpreted as having any meaning in the NaN payload anyway, as not
acceptable to strtoull).
Tested for x86_64 and x86.
[BZ #19266]
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Check directly for
upper case and lower case letters inside NAN(), not using TOLOWER.
* stdlib/tst-strtod-nan-locale-main.c: New file.
* stdlib/tst-strtod-nan-locale.c: Likewise.
* stdlib/Makefile (tests): Add tst-strtod-nan-locale.
[$(run-built-tests) = yes] ($(objpfx)tst-strtod-nan-locale.out):
Depend on $(gen-locales).
($(objpfx)tst-strtod-nan-locale): Depend on $(libm).
* wcsmbs/tst-wcstod-nan-locale.c: New file.
* wcsmbs/Makefile (tests): Add tst-wcstod-nan-locale.
[$(run-built-tests) = yes] ($(objpfx)tst-wcstod-nan-locale.out):
Depend on $(gen-locales).
($(objpfx)tst-wcstod-nan-locale): Depend on $(libm).
This avoids build failures in the tests, and matches what is in
bits/mathdef.h.
Update the libc and libm abilist files to include __finitel,
__isinfl, and __isnanl.
With current kernel versions, the check does not reliably detect that
unavailable CPUs are requested, for these reasons:
(1) The kernel will silently ignore non-allowed CPUs, that is, CPUs
which are physically present but disallowed for the thread
based on system configuration.
(2) Similarly, CPU bits which lack an online CPU (possible CPUs)
are ignored.
(3) The existing probing code assumes that the CPU mask size is a
power of two and at least 1024. Neither has it to be a power
of two, nor is the minimum possible value 1024, so the value
determined is often too large. This means that the CPU set
size check in glibc accepts CPU bits beyond the actual hard
system limit.
(4) Future kernel versions may not even have a fixed CPU set size.
After the removal of the probing code, the kernel still returns
EINVAL if no CPU in the requested set remains which can run the
thread after the affinity change.
Applications which care about the exact affinity mask will have
to query it using sched_getaffinity after setting it. Due to the
effects described above, this commit does not change this.
The new tests supersede tst-getcpu, which is removed. This
addresses bug 19164 because the new tests allocate CPU sets
dynamically.
* nptl/check-cpuset.h: Remove.
* nptl/pthread_attr_setaffinity.c (__pthread_attr_setaffinity_new):
Remove CPU set size check.
* nptl/pthread_setattr_default_np.c (pthread_setattr_default_np):
Likewise.
* sysdeps/unix/sysv/linux/check-cpuset.h: Remove.
* sysdeps/unix/sysv/linux/pthread_setaffinity.c
(__kernel_cpumask_size, __determine_cpumask_size): Remove.
(__pthread_setaffinity_new): Remove CPU set size check.
* sysdeps/unix/sysv/linux/sched_setaffinity.c
(__kernel_cpumask_size): Remove.
(__sched_setaffinity_new): Remove CPU set size check.
* manual/threads.texi (Default Thread Attributes): Remove stale
reference to check_cpuset_attr, determine_cpumask_size in comment.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == posix] (tests):
Remove tst-getcpu. Add tst-affinity, tst-affinity-pid.
[$(subdir) == nptl] (tests): Add tst-thread-affinity-pthread,
tst-thread-affinity-pthread2, tst-thread-affinity-sched.
* sysdeps/unix/sysv/linux/tst-affinity.c: New file.
* sysdeps/unix/sysv/linux/tst-affinity-pid.c: New file.
* sysdeps/unix/sysv/linux/tst-skeleton-affinity.c: New skeleton test file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-sched.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread2.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-skeleton-affinity.c: New
skeleton test file.
* sysdeps/unix/sysv/linux/tst-getcpu.c: Remove. Superseded by
tst-affinity-pid.
This patch updates <sys/ptrace.h> for Linux 4.3, adding
PTRACE_O_SUSPEND_SECCOMP and updating the value of PTRACE_O_MASK.
Some architectures were missing the older PTRACE_O_EXITKILL, so that
was added to the files missing it as well.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h
(PTRACE_O_EXITKILL): New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h (PTRACE_O_EXITKILL):
New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/sys/ptrace.h (PTRACE_O_SUSPEND_SECCOMP):
New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/tile/sys/ptrace.h (PTRACE_O_EXITKILL):
New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
