This is a follow up patch to the fix for bug 19329. This adds relaxed
MO atomics to accesses that were previously data races but are now
race conditions, and where relaxed MO is sufficient.
The race conditions all follow the pattern that the write is behind the
dlopen lock, but a read can happen concurrently (e.g. during tls access)
without holding the lock. For slotinfo entries the read value only
matters if it reads from a synchronized write in dlopen or dlclose,
otherwise the related dtv entry is not valid to access so it is fine
to leave it in an inconsistent state. The same applies for
GL(dl_tls_max_dtv_idx) and GL(dl_tls_generation), but there the
algorithm relies on the fact that the read of the last synchronized
write is an increasing value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
DTV setup at thread creation (_dl_allocate_tls_init) is changed
to take the dlopen lock, GL(dl_load_lock). Avoiding data races
here without locks would require design changes: the map that is
accessed for static TLS initialization here may be concurrently
freed by dlclose. That use after free may be solved by only
locking around static TLS setup or by ensuring dlclose does not
free modules with static TLS, however currently every link map
with TLS has to be accessed at least to see if it needs static
TLS. And even if that's solved, still a lot of atomics would be
needed to synchronize DTV related globals without a lock. So fix
both bug 19329 and bug 27111 with a lock that prevents DTV setup
running concurrently with dlopen or dlclose.
_dl_update_slotinfo at TLS access still does not use any locks
so CONCURRENCY NOTES are added to explain the synchronization.
The early exit from the slotinfo walk when max_modid is reached
is not strictly necessary, but does not hurt either.
An incorrect acquire load was removed from _dl_resize_dtv: it
did not synchronize with any release store or fence and
synchronization is now handled separately at thread creation
and TLS access time.
There are still a number of racy read accesses to globals that
will be changed to relaxed MO atomics in a followup patch. This
should not introduce regressions compared to existing behaviour
and avoid cluttering the main part of the fix.
Not all TLS access related data races got fixed here: there are
additional races at lazy tlsdesc relocations see bug 27137.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
All the stack lists are now in _rtld_global, so it is possible
to change stack permissions directly from there, instead of
calling into libpthread to do the change.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Permissions of the cached stacks may have to be updated if an object
is loaded that requires executable stacks, so the dynamic loader
needs to know about these cached stacks.
The move of in_flight_stack and stack_cache_actsize is a requirement for
merging __reclaim_stacks into the fork implementation in libc.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This is an early variant of __tls_init_tp, primarily for initializing
thread-related elements of _rtld_global/GL.
Some existing initialization code not needed for NPTL is moved into
the generic version of this function.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If libpthread is included in libc, it is not necessary to delay
initialization of the lock/unlock function pointers until libpthread
is loaded. This eliminates two unprotected function pointers
from _rtld_global and removes some initialization code from
libpthread.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Previously, the source file nptl/cancellation.c was compiled multiple
times, for libc, libpthread, librt. This commit switches to a single
implementation, with new __pthread_enable_asynccancel@@GLIBC_PRIVATE,
__pthread_disable_asynccancel@@GLIBC_PRIVATE exports.
The almost-unused CANCEL_ASYNC and CANCEL_RESET macros are replaced
by LIBC_CANCEL_ASYNC and LIBC_CANCEL_ASYNC macros. They call the
__pthread_* functions unconditionally now. The macros are still
needed because shared code uses them; Hurd has different definitions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The stack list is available in ld.so since commit
1daccf403b ("nptl: Move stack list
variables into _rtld_global"), so it's possible to walk the stack
list directly in ld.so and perform the initialization there.
This eliminates an unprotected function pointer from _rtld_global
and reduces the libpthread initialization code.
TLS_INIT_TP is processor-specific, so it is not a good place to
put thread library initialization code (it would have to be repeated
for all CPUs). Introduce __tls_init_tp as a separate function,
to be called immediately after TLS_INIT_TP. Move the existing
stack list setup code for NPTL to this function.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Calling free directly may end up freeing a pointer allocated by the
dynamic loader using malloc from libc.so in the base namespace using
the allocator from libc.so in a secondary namespace, which results in
crashes.
This commit redirects the free call through GLRO and the dynamic
linker, to reach the correct namespace. It also cleans up the dlerror
handling along the way, so that pthread_setspecific is no longer
needed (which avoids triggering bug 24774).
Commit 9e78f6f6e7 ("Implement
_dl_catch_error, _dl_signal_error in libc.so [BZ #16628]") has the
side effect that distinct namespaces, as created by dlmopen, now have
separate implementations of the rtld exception mechanism. This means
that the call to _dl_catch_error from libdl in a secondary namespace
does not actually install an exception handler because the
thread-local variable catch_hook in the libc.so copy in the secondary
namespace is distinct from that of the base namepace. As a result, a
dlsym/dlopen/... failure in a secondary namespace terminates the process
with a dynamic linker error because it looks to the exception handler
mechanism as if no handler has been installed.
This commit restores GLRO (dl_catch_error) and uses it to set the
handler in the base namespace.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It's necessary to stub out __libc_disable_asynccancel and
__libc_enable_asynccancel via rtld-stubbed-symbols because the new
direct references to the unwinder result in symbol conflicts when the
rtld exception handling from libc is linked in during the construction
of librtld.map.
unwind-forcedunwind.c is merged into unwind-resume.c. libc now needs
the functions that were previously only used in libpthread.
The GLIBC_PRIVATE exports of __libc_longjmp and __libc_siglongjmp are
no longer needed, so switch them to hidden symbols.
The symbol __pthread_unwind_next has been moved using
scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
Remove generic tlsdesc code related to lazy tlsdesc processing since
lazy tlsdesc relocation is no longer supported. This includes removing
GL(dl_load_lock) from _dl_make_tlsdesc_dynamic which is only called at
load time when that lock is already held.
Added a documentation comment too.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
map is not valid to access here because it can be freed by a concurrent
dlclose: during tls access (via __tls_get_addr) _dl_update_slotinfo is
called without holding dlopen locks. So don't check the modid of map.
The map == 0 and map != 0 code paths can be shared (avoiding the dtv
resize in case of map == 0 is just an optimization: larger dtv than
necessary would be fine too).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Since
commit a509eb117f
Avoid late dlopen failure due to scope, TLS slotinfo updates [BZ #25112]
the generation counter update is not needed in the failure path.
That commit ensures allocation in _dl_add_to_slotinfo happens before
the demarcation point in dlopen (it is called twice, first time is for
allocation only where dlopen can still be reverted on failure, then
second time actual dtv updates are done which then cannot fail).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The test dlopens a large number of modules with TLS, they are reused
from an existing test.
The test relies on the reuse of slotinfo entries after dlclose, without
bug 27135 fixed this needs a failing dlopen. With a slotinfo list that
has non-monotone increasing generation counters, bug 27136 can trigger.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The max modid is a valid index in the dtv, it should not be skipped.
The bug is observable if the last module has modid == 64 and its
generation is same or less than the max generation of the previous
modules. Then dtv[0].counter implies dtv[64] is initialized but
it isn't. Fixes bug 27136.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When parse_tunables tries to erase a tunable marked as SXID_ERASE for
setuid programs, it ends up setting the envvar string iterator
incorrectly, because of which it may parse the next tunable
incorrectly. Given that currently the implementation allows malformed
and unrecognized tunables pass through, it may even allow SXID_ERASE
tunables to go through.
This change revamps the SXID_ERASE implementation so that:
- Only valid tunables are written back to the tunestr string, because
of which children of SXID programs will only inherit a clean list of
identified tunables that are not SXID_ERASE.
- Unrecognized tunables get scrubbed off from the environment and
subsequently from the child environment.
- This has the side-effect that a tunable that is not identified by
the setxid binary, will not be passed on to a non-setxid child even
if the child could have identified that tunable. This may break
applications that expect this behaviour but expecting such tunables
to cross the SXID boundary is wrong.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Instead of passing GLIBC_TUNABLES via the environment, pass the
environment variable from parent to child. This allows us to test
multiple variables to ensure better coverage.
The test list currently only includes the case that's already being
tested. More tests will be added later.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The simplification of tunable_set interfaces took care of
signed/unsigned conversions while setting values, but comparison with
bounds ended up being incorrect; comparing TUNABLE_SIZE_T values for
example will fail because SIZE_MAX is seen as -1.
Add comparison helpers that take tunable types into account and use
them to do comparison instead.
dlopen updates libname_list by writing to lastp->next, but concurrent
reads in _dl_name_match_p were not synchronized when it was called
without holding GL(dl_load_lock), which can happen during lazy symbol
resolution.
This patch fixes the race between _dl_name_match_p reading lastp->next
and add_name_to_object writing to it. This could cause segfault on
targets with weak memory order when lastp->next->name is read, which
was observed on an arm system. Fixes bug 21349.
(Code is from Maninder Singh, comments and description is from Szabolcs
Nagy.)
Co-authored-by: Vaneet Narang <v.narang@samsung.com>
Co-authored-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This does not change the emitted code since __libc_start_main does not
return, but is important for formal flags compliance.
This also cleans up the cosmetic inconsistency in the stack protector
flags in csu, especially the incorrect value of STACK_PROTECTOR_LEVEL.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Enabling --enable-stack-protector=all causes the following tests to fail:
FAIL: elf/ifuncmain9picstatic
FAIL: elf/ifuncmain9static
Nick Alcock (who committed the stack protector code) marked the IFUNC
resolvers with inhibit_stack_protector when he done the original work and
suggested doing so again @ BZ #25680. This patch adds
inhibit_stack_protector to ifuncmain9.
After patch is applied, --enable-stack-protector=all does not fail the
above tests.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In this case, use the link map of the dynamic loader itself as
a replacement. This is more than just a hack: if we ever support
DT_RUNPATH/DT_RPATH for the dynamic loader, reporting it for
ld.so --help (without further command line arguments) would be the
right thing to do.
Fixes commit 3324213125 ("elf: Always
set l in _dl_init_paths (bug 23462)").
After d1d5471579 ("Remove dead
DL_DST_REQ_STATIC code.") we always setup the link map l to make the
static and shared cases the same. The bug is that in elf/dl-load.c
(_dl_init_paths) we conditionally set l only in the #ifdef SHARED
case, but unconditionally use it later. The simple solution is to
remove the #ifdef SHARED conditional, because it's no longer needed,
and unconditionally setup l for both the static and shared cases. A
regression test is added to run a static binary with
LD_LIBRARY_PATH='$ORIGIN' which crashes before the fix and runs after
the fix.
Co-Authored-By: Florian Weimer <fweimer@redhat.com>
It turns out the startup code in csu/elf-init.c has a perfect pair of
ROP gadgets (see Marco-Gisbert and Ripoll-Ripoll, "return-to-csu: A
New Method to Bypass 64-bit Linux ASLR"). These functions are not
needed in dynamically-linked binaries because DT_INIT/DT_INIT_ARRAY
are already processed by the dynamic linker. However, the dynamic
linker skipped the main program for some reason. For maximum
backwards compatibility, this is not changed, and instead, the main
map is consulted from __libc_start_main if the init function argument
is a NULL pointer.
For statically linked binaries, the old approach based on linker
symbols is still used because there is nothing else available.
A new symbol version __libc_start_main@@GLIBC_2.34 is introduced because
new binaries running on an old libc would not run their ELF
constructors, leading to difficult-to-debug issues.
The elision interfaces are closely aligned between the targets that
implement them, so declare them in the generic <lowlevellock.h>
file.
Empty .c stubs are provided, so that fewer makefile updates
under sysdeps are needed. Also simplify initialization via
__libc_early_init.
The symbols __lll_clocklock_elision, __lll_lock_elision,
__lll_trylock_elision, __lll_unlock_elision, __pthread_force_elision
move into libc. For the time being, non-hidden references are used
from libpthread to access them, but once that part of libpthread
is moved into libc, hidden symbols will be used again. (Hidden
references seem desirable to reduce the likelihood of transactions
aborts.)
The kernel does not put the vDSO at special addresses, so writev can
write the name directly. Also remove the incorrect comment about not
setting l_name.
Andy Lutomirski confirmed in
<https://lore.kernel.org/linux-api/442A16C0-AE5A-4A44-B261-FE6F817EAF3C@amacapital.net/>
that this copy is not necessary.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The glibc.malloc.mmap_max tunable as well as al of the INT_32 tunables
don't have use for negative values, so pin the hardcoded limits in the
non-negative range of INT. There's no real benefit in any of those
use cases for the extended range of unsigned, so I have avoided added
a new type to keep things simple.
The TUNABLE_SET interface took a primitive C type argument, which
resulted in inconsistent type conversions internally due to incorrect
dereferencing of types, especialy on 32-bit architectures. This
change simplifies the TUNABLE setting logic along with the interfaces.
Now all numeric tunable values are stored as signed numbers in
tunable_num_t, which is intmax_t. All calls to set tunables cast the
input value to its primitive type and then to tunable_num_t for
storage. This relies on gcc-specific (although I suspect other
compilers woul also do the same) unsigned to signed integer conversion
semantics, i.e. the bit pattern is conserved. The reverse conversion
is guaranteed by the standard.
Add _SC_MINSIGSTKSZ for the minimum signal stack size derived from
AT_MINSIGSTKSZ, which is the minimum number of bytes of free stack
space required in order to gurantee successful, non-nested handling
of a single signal whose handler is an empty function, and _SC_SIGSTKSZ
which is the suggested minimum number of bytes of stack space required
for a signal stack.
If AT_MINSIGSTKSZ isn't available, sysconf (_SC_MINSIGSTKSZ) returns
MINSIGSTKSZ. On Linux/x86 with XSAVE, the signal frame used by kernel
is composed of the following areas and laid out as:
------------------------------
| alignment padding |
------------------------------
| xsave buffer |
------------------------------
| fsave header (32-bit only) |
------------------------------
| siginfo + ucontext |
------------------------------
Compute AT_MINSIGSTKSZ value as size of xsave buffer + size of fsave
header (32-bit only) + size of siginfo and ucontext + alignment padding.
If _SC_SIGSTKSZ_SOURCE or _GNU_SOURCE are defined, MINSIGSTKSZ and SIGSTKSZ
are redefined as
/* Default stack size for a signal handler: sysconf (SC_SIGSTKSZ). */
# undef SIGSTKSZ
# define SIGSTKSZ sysconf (_SC_SIGSTKSZ)
/* Minimum stack size for a signal handler: SIGSTKSZ. */
# undef MINSIGSTKSZ
# define MINSIGSTKSZ SIGSTKSZ
Compilation will fail if the source assumes constant MINSIGSTKSZ or
SIGSTKSZ.
The reason for not simply increasing the kernel's MINSIGSTKSZ #define
(apart from the fact that it is rarely used, due to glibc's shadowing
definitions) was that userspace binaries will have baked in the old
value of the constant and may be making assumptions about it.
For example, the type (char [MINSIGSTKSZ]) changes if this #define
changes. This could be a problem if an newly built library tries to
memcpy() or dump such an object defined by and old binary.
Bounds-checking and the stack sizes passed to things like sigaltstack()
and makecontext() could similarly go wrong.
The existing code specifies -Wl,--defsym=malloc=0 and other malloc.os
definitions before libc_pic.a so that libc_pic.a(malloc.os) is not
fetched. This trick is used to avoid multiple definition errors which
would happen as a chain result:
dl-allobjs.os has an undefined __libc_scratch_buffer_set_array_size
__libc_scratch_buffer_set_array_size fetches libc_pic.a(scratch_buffer_set_array_size.os)
libc_pic.a(scratch_buffer_set_array_size.os) has an undefined free
free fetches libc_pic.a(malloc.os)
libc_pic.a(malloc.os) has an undefined __libc_message
__libc_message fetches libc_pic.a(libc_fatal.os)
libc_fatal.os will cause a multiple definition error (__GI___libc_fatal)
>>> defined at dl-fxstatat64.c
>>> /tmp/p/glibc/Release/elf/dl-allobjs.os:(__GI___libc_fatal)
>>> defined at libc_fatal.c
>>> libc_fatal.os:(.text+0x240) in archive /tmp/p/glibc/Release/libc_pic.a
LLD processes --defsym after all input files, so this trick does not
suppress multiple definition errors with LLD. Split the step into two
and use an object file to make the intention more obvious and make LLD
work.
This is conceptually more appropriate because --defsym defines a SHN_ABS
symbol while a normal definition is relative to the image base.
See https://sourceware.org/pipermail/libc-alpha/2020-March/111910.html
for discussions about the --defsym semantics.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
For configurations with cross-compiling equal to 'maybe' or 'no',
ldconfig will not run and thus the ld.so.cache will not be created
on the container testroot.pristine.
This lead to failures on both tst-glibc-hwcaps-prepend-cache and
tst-ldconfig-ld_so_conf-update on environments where the same
compiler can be used to build different ABIs (powerpc and x86 for
instance).
This patch addas a new test-container hook, ldconfig.run, that
triggers a ldconfig execution prior the test execution.
Checked on x86_64-linux-gnu and i686-linux-gnu.
elf/tst-prelink-cmp was initially added for x86 (commit fe534fe898) to validate
the fix for Bug 19178, and later applied to all architectures that use GLOB_DAT
relocations (commit 89569c8bb6). However, that bug only affected targets that
handle GLOB_DAT relocations as ELF_TYPE_CLASS_EXTERN_PROTECTED_DATA, so the test
should only apply to targets defining DL_EXTERN_PROTECTED_DATA, which gates the
usage of the elf type class above. For all other targets not meeting that
criteria, the test now returns with UNSUPPORTED status.
Fixes the test on POWER10 processors, which started using R_PPC64_GLOB_DAT.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Extern symbol access in position independent code usually involves GOT
indirection which needs RELATIVE reloc in a static linked PIE. (On
some targets this is avoided e.g. because the linker can relax a GOT
access to a pc-relative access, but this is not generally true.) Code
that runs before static PIE self relocation must avoid relying on
dynamic relocations which can be ensured by using hidden visibility.
However we cannot just make all symbols hidden:
On i386, all calls to IFUNC functions must go through PLT and calls to
hidden functions CANNOT go through PLT in PIE since EBX used in PIE PLT
may not be set up for local calls to hidden IFUNC functions.
This patch aims to make symbol references hidden in code that is used
before and by _dl_relocate_static_pie when building a static PIE libc.
Note: for an object that is used in the startup code, its references
and definition may not have consistent visibility: it is only forced
hidden in the startup code.
This is needed for fixing bug 27072.
Co-authored-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
With static pie linking pointers in the tunables list need
RELATIVE relocs since the absolute address is not known at link
time. We want to avoid relocations so the static pie self
relocation can be done after tunables are initialized.
This is a simple fix that embeds the tunable strings into the
tunable list instead of using pointers. It is possible to have
a more compact representation of tunables with some additional
complexity in the generator and tunable parser logic. Such
optimization will be useful if the list of tunables grows.
There is still an issue that tunables_strdup allocates and the
failure handling code path is sufficiently complex that it can
easily have RELATIVE relocations. It is possible to avoid the
early allocation and only change environment variables in a
setuid exe after relocations are processed. But that is a
bigger change and early failure is fatal anyway so it is not
as critical to fix right away. This is bug 27181.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The representation of the tunables including type information and
the tunable list structure are only used in the implementation not
in the tunables api that is exposed to usage within glibc.
This patch moves the representation related definitions into the
existing dl-tunable-types.h and uses that only for implementation.
The tunable callback and related types are moved to dl-tunables.h
because they are part of the tunables api.
This reduces the details exposed in the tunables api so the internals
are easier to change.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Since __libc_init_secure is called before ARCH_SETUP_TLS, it must use
"int $0x80" for system calls in i386 static PIE. Add startup_getuid,
startup_geteuid, startup_getgid and startup_getegid to <startup.h>.
Update __libc_init_secure to use them.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Set the default _dl_sysinfo in _dl_aux_init to avoid RELATIVE relocation
in static PIE.
This is needed for fixing bug 27072 on x86.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On x86, ifuncmain6pie failed with:
[hjl@gnu-cfl-2 build-i686-linux]$ ./elf/ifuncmain6pie --direct
./elf/ifuncmain6pie: IFUNC symbol 'foo' referenced in '/export/build/gnu/tools-build/glibc-32bit/build-i686-linux/elf/ifuncmod6.so' is defined in the executable and creates an unsatisfiable circular dependency.
[hjl@gnu-cfl-2 build-i686-linux]$ readelf -rW elf/ifuncmod6.so | grep foo
00003ff4 00000706 R_386_GLOB_DAT 0000400c foo_ptr
00003ff8 00000406 R_386_GLOB_DAT 00000000 foo
0000400c 00000401 R_386_32 00000000 foo
[hjl@gnu-cfl-2 build-i686-linux]$
Remove non-JUMP_SLOT relocations against foo in ifuncmod6.so, which
trigger the circular IFUNC dependency, and build ifuncmain6pie with
-Wl,-z,lazy.
Store ISA level in the portion of the unused upper 32 bits of the hwcaps
field in cache and the unused pad field in aux cache. ISA level is stored
and checked only for shared objects in glibc-hwcaps subdirectories. The
shared objects in the default directories aren't checked since there are
no fallbacks for these shared objects.
Tested on x86-64-v2, x86-64-v3 and x86-64-v4 machines with
--disable-hardcoded-path-in-tests and --enable-hardcoded-path-in-tests.
Since commit 2f056e8a5d
"aarch64: define PI_STATIC_AND_HIDDEN",
building glibc with gcc-8 on aarch64 fails with
/BLD/elf/librtld.os: in function `elf_get_dynamic_info':
/SRC/elf/get-dynamic-info.h:70:(.text+0xad8): relocation truncated to
fit: R_AARCH64_ADR_PREL_PG_HI21 against symbol `_rtld_local' defined
in .data section in /BLD/elf/librtld.os
This is a gcc bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98618
The bug is fixed on gcc-10 and not yet backported. gcc-9 is affected,
but the issue happens to not trigger in glibc, gcc-8 and older seems
to miscompile rtld.os.
Rewriting the affected code in elf_get_dynamic_info seems to make the
issue go away on <= gcc-9.
The change makes the logic a bit clearer too (by separating the index
computation and array update) and drops an older gcc workaround (since
gcc 4.6 is no longer supported).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
GCC 11 supports -march=x86-64-v[234] to enable x86 micro-architecture ISA
levels:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97250
and -mneeded to emit GNU_PROPERTY_X86_ISA_1_NEEDED property with
GNU_PROPERTY_X86_ISA_1_V[234] marker:
https://gitlab.com/x86-psABIs/x86-64-ABI/-/merge_requests/13
Binutils support for GNU_PROPERTY_X86_ISA_1_V[234] marker were added by
commit b0ab06937385e0ae25cebf1991787d64f439bf12
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Oct 30 06:49:57 2020 -0700
x86: Support GNU_PROPERTY_X86_ISA_1_BASELINE marker
and
commit 32930e4edbc06bc6f10c435dbcc63131715df678
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Oct 9 05:05:57 2020 -0700
x86: Support GNU_PROPERTY_X86_ISA_1_V[234] marker
GNU_PROPERTY_X86_ISA_1_NEEDED property in x86 ELF binaries indicate the
micro-architecture ISA level required to execute the binary. The marker
must be added by programmers explicitly in one of 3 ways:
1. Pass -mneeded to GCC.
2. Add the marker in the linker inputs as this patch does.
3. Pass -z x86-64-v[234] to the linker.
Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234]
marker support to ld.so if binutils 2.32 or newer is used to build glibc:
1. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234]
markers to elf.h.
2. Add GNU_PROPERTY_X86_ISA_1_BASELINE and GNU_PROPERTY_X86_ISA_1_V[234]
marker to abi-note.o based on the ISA level used to compile abi-note.o,
assuming that the same ISA level is used to compile the whole glibc.
3. Add isa_1 to cpu_features to record the supported x86 ISA level.
4. Rename _dl_process_cet_property_note to _dl_process_property_note and
add GNU_PROPERTY_X86_ISA_1_V[234] marker detection.
5. Update _rtld_main_check and _dl_open_check to check loaded objects
with the incompatible ISA level.
6. Add a testcase to verify that dlopen an x86-64-v4 shared object fails
on lesser platforms.
7. Use <get-isa-level.h> in dl-hwcaps-subdirs.c and tst-glibc-hwcaps.c.
Tested under i686, x32 and x86-64 modes on x86-64-v2, x86-64-v3 and
x86-64-v4 machines.
Marked elf/tst-isa-level-1 with x86-64-v4, ran it on x86-64-v3 machine
and got:
[hjl@gnu-cfl-2 build-x86_64-linux]$ ./elf/tst-isa-level-1
./elf/tst-isa-level-1: CPU ISA level is lower than required
[hjl@gnu-cfl-2 build-x86_64-linux]$
I've updated copyright dates in glibc for 2021. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus csu/version.c which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a small change to the copyright notice
in NEWS which should let NEWS get updated automatically next year.
Please remember to include 2021 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Add a new glibc tunable: mem.tagging. This is a decimal constant in
the range 0-255 but used as a bit-field.
Bit 0 enables use of tagged memory in the malloc family of functions.
Bit 1 enables precise faulting of tag failure on platforms where this
can be controlled.
Other bits are currently unused, but if set will cause memory tag
checking for the current process to be enabled in the kernel.
Change sbrk to fail for !__libc_initial (in the generic
implementation). As a result, sbrk is (relatively) safe to use
for the __libc_initial case (from the main libc). It is therefore
no longer necessary to avoid using it in that case (or updating the
brk cache), and the __libc_initial flag does not need to be updated
as part of dlmopen or static dlopen.
As before, direct brk system calls on Linux may lead to memory
corruption.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Otherwise, it will not participate in the dependency sorting.
Fixes commit 9ffa50b26b
("elf: Include libc.so.6 as main program in dependency sort
(bug 20972)").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The failure paths in _dl_map_object_from_fd did not clean every
potentially allocated resource up.
Handle l_phdr, l_libname and mapped segments in the common failure
handling code.
There are various bits that may not be cleaned properly on failure
(e.g. executable stack, incomplete dl_map_segments) fixing those
need further changes.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
_dl_map_object_from_fd has complex error handling with cleanups.
It was managed by a separate function to avoid code bloat at
every failure case, but since the code was changed to use gotos
there is no longer such code bloat from inlining.
Maintaining a separate error handling function is harder as it
needs to access local state which has to be passed down. And the
same lose function was used in open_verify which is error prone.
The goto labels are changed since there is no longer a call.
The new code generates slightly smaller binary.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Since elf.h is a public header file copied to other projects,
try to make it free from spelling typos.
This change fixes the following spelling typos in comments of elf.h:
Auxialiary -> Auxiliary
tenatively -> tentatively
compatability -> compatibility
_dl_map_object_deps always sorts the initially loaded object first
during dependency sorting. This means it is relocated last in
dl_open_worker. This results in crashes in IFUNC resolvers without
lazy bindings if libraries are preloaded that refer to IFUNCs in
libc.so.6: the resolvers are called when libc.so.6 has not been
relocated yet, so references to _rtld_global_ro etc. crash.
The fix is to check against the libc.so.6 link map recorded by the
__libc_early_init framework, and let it participate in the dependency
sort.
This fixes bug 20972.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
To handle GNU property notes on aarch64 some segments need to
be mmaped again, so the fd of the loaded ELF module is needed.
When the fd is not available (kernel loaded modules), then -1
is passed.
The fd is passed to both _dl_process_pt_gnu_property and
_dl_process_pt_note for consistency. Target specific note
processing functions are updated accordingly.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Program headers are processed in two pass: after the first pass
load segments are mmapped so in the second pass target specific
note processing logic can access the notes.
The second pass is moved later so various link_map fields are
set up that may be useful for note processing such as l_phdr.
The second pass should be before the fd is closed so that is
available.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Subdirectories z13, z14, z15 can be selected, mostly based on the
level of support for vector instructions.
Co-Authored-By: Stefan Liebler <stli@linux.ibm.com>
The misattributed dependencies can cause failures in parallel testing
if the dependencies have not been built yet.
Fixes commit a332bd1518
("elf: Add elf/tst-dlopenfail-2 [BZ #25396]").
This recognizes the DL_CACHE_HWCAP_EXTENSION flag in cache entries,
and picks the supported cache entry with the highest priority.
The elf/tst-glibc-hwcaps-prepend-cache test documents a non-desired
aspect of the current cache implementation: If the cache selects a DSO
that does not exist on disk, _dl_map_object falls back to open_path,
which may or may not find an alternative implementation. This is an
existing limitation that also applies to the legacy hwcaps processing
for ld.so.cache.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Libraries from these subdirectories are added to the cache
with a special hwcap bit DL_CACHE_HWCAP_EXTENSION, so that
they are ignored by older dynamic loaders.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This simplifies the string table construction in elf/cache.c
because there is no more need to keep track of offsets explicitly;
the string table implementation does this internally.
This change slightly reduces the size of the cache on disk. The
file format does not change as a result. The strings are
null-terminated, without explicit length, so tail merging is
transparent to readers.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This will be used in ldconfig to reduce the ld.so.cache size slightly.
Tail merging is an optimization where a pointer points into another
string if the first string is a suffix of the second string.
The hash function FNV-1a was chosen because it is simple and achieves
good dispersion even for short strings (so that the hash table bucket
count can be a power of two). It is clearly superior to the hsearch
hash and the ELF hash in this regard.
The hash table uses chaining for collision resolution.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
A previously unused new-format header field is used to record
the address of an extension directory.
This change adds a demo extension which records the version of
ldconfig which builds a file.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use a reserved byte in the new format cache header to indicate whether
the file is in little endian or big endian format. Eventually, this
information could be used to provide a unified cache for qemu-user
and similiar scenarios.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This hacks non-power-set processing into _dl_important_hwcaps.
Once the legacy hwcaps handling goes away, the subdirectory
handling needs to be reworked, but it is premature to do this
while both approaches are still supported.
ld.so supports two new arguments, --glibc-hwcaps-prepend and
--glibc-hwcaps-mask. Each accepts a colon-separated list of
glibc-hwcaps subdirectory names. The prepend option adds additional
subdirectories that are searched first, in the specified order. The
mask option restricts the automatically selected subdirectories to
those listed in the option argument. For example, on systems where
/usr/lib64 is on the library search path,
--glibc-hwcaps-prepend=valgrind:debug causes the dynamic loader to
search the directories /usr/lib64/glibc-hwcaps/valgrind and
/usr/lib64/glibc-hwcaps/debug just before /usr/lib64 is searched.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On GNU/Hurd we not only need $(common-objpfx) in LD_LIBRARY_PATH when loading
dynamic objects, but also $(common-objpfx)/mach and $(common-objpfx)/hurd. This
adds an ld-library-path variable to be used as LD_LIBRARY_PATH basis in
Makefiles, and a sysdep-ld-library-path variable for sysdeps to add some
more paths, here mach/ and hurd/.
Now __thread_gscope_wait (the function behind THREAD_GSCOPE_WAIT,
formerly __wait_lookup_done) can be implemented directly in ld.so,
eliminating the unprotected GL (dl_wait_lookup_done) function
pointer.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
We need NO_RTLD_HIDDEN because of the need for PLT calls in ld.so.
See Roland's comment in
https://sourceware.org/bugzilla/show_bug.cgi?id=15605
"in the Hurd it's crucial that calls like __mmap be the libc ones
instead of the rtld-local ones after the bootstrap phase, when the
dynamic linker is being used for dlopen and the like."
We used to just avoid all hidden use in the rtld ; this commit switches to
keeping only those that should use PLT calls, i.e. essentially those defined in
sysdeps/mach/hurd/dl-sysdep.c:
__assert_fail
__assert_perror_fail
__*stat64
_exit
This fixes a few startup issues, notably the call to __tunable_get_val that is
made before PLTs are set up.
struct file_entry_new starts with the fields of struct file_entry,
so the code can be shared if the size computation is made dynamic.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The elf/elf.h header is shared, verbatim, by the elfutils project.
However, elfutils can be used on systems with libcs other than glibc,
making the presence of __BEGIN_DECLS, __END_DECLS and <features.h> in
the file something that downstream distros may have to add patches for.
Furthermore, this file doesn't declare anything with language linkage,
so `extern "C" {}` blocks aren't necessary; it also doesn't have any
conditional definitions based on feature test macros, making inclusion
of features.h unnecessary.
The SXID_* tunable properties only influence processes that are
AT_SECURE, so make that a bit more explicit in the documentation and
comment.
Revisiting the code after a few years I managed to confuse myself, so
I imagine there could be others who may have incorrectly assumed like
I did that the SXID_ERASE tunables are not inherited by children of
non-AT_SECURE processes.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
They have been renamed from env_path_list and rtld_search_dirs to
avoid linknamespace issues.
This change will allow future use these variables in diagnostics.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This requires defining a macro for the full path, matching the
-Wl,--dynamic-link= arguments used for linking glibc programs,
and ldd script.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This prints out version information for the dynamic loader and
exits immediately, without further command line processing
(which seems to match what some GNU tools do).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
--help processing is deferred to the point where the executable has
been loaded, so that it is possible to eventually include information
from the main executable in the help output.
As suggested in the GNU command-line interface guidelines, the help
message is printed to standard output, and the exit status is
successful.
Handle usage errors closer to the GNU command-line interface
guidelines.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Also add a comment to elf/Makefile, explaining why we cannot use
config.status for autoconf template processing.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Introduce struct dl_main_state and move it to <dl-main.h>. Rename
enum mode to enum rtld_mode and add the rtld_mode_ prefix to the enum
constants.
This avoids the need for putting state that is only needed during
startup into the ld.so data segment.
In some cases, it is difficult to determine the kind of malloc
based on the execution context, so a function to determine that
is helpful.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The generic version is parallel to _dl_writev. It cannot use
_dl_writev directly because the errno value needs to be obtained
under a lock.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This functionality does not seem to be useful since static dlopen
is mostly used for iconv/character set conversion and NSS support.
gconv modules are loaded with full paths anyway, so that the
HWCAP subdirectory logic does not apply.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some tunable values and their minimum/maximum values must be determinted
at run-time. Add TUNABLE_SET_WITH_BOUNDS and TUNABLE_SET_WITH_BOUNDS_FULL
to update tunable value together with minimum and maximum values.
__tunable_set_val is updated to set tunable value as well as min/max
values.
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Constants double checked against binutils and the ELF for the Arm 64-bit
Architecture (AArch64) Release 2020Q2 document.
Only BTI PLT is used in glibc, there's no PAC PLT with glibc, and people
are expected to use BIND_NOW.
The _sys_errlist and _sys_siglist symbols are deprecated since 2.32.
This patch adds a TEST_COMPAT check around the tests. This fixes test
failures on new architectures (such as RV32) that don't have this
symbol defined.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Make the computation in elf/dl-tls.c more transparent, and add
an explicit test for the historic value.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The kernel ABI is not finalized, and there are now various proposals
to change the size of struct rseq, which would make the glibc ABI
dependent on the version of the kernels used for building glibc.
This is of course not acceptable.
This reverts commit 48699da1c4 ("elf:
Support at least 32-byte alignment in static dlopen"), commit
8f4632deb3 ("Linux: rseq registration
tests"), commit 6e29cb3f61 ("Linux: Use
rseq in sched_getcpu if available"), and commit
0c76fc3c2b ("Linux: Perform rseq
registration at C startup and thread creation"), resolving the conflicts
introduced by the ARC port and the TLS static surplus changes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
On some targets static TLS surplus area can be used opportunistically
for dynamically loaded modules such that the TLS access then becomes
faster (TLSDESC and powerpc TLS optimization). However we don't want
all surplus TLS to be used for this optimization because dynamically
loaded modules with initial-exec model TLS can only use surplus TLS.
The new contract for surplus static TLS use is:
- libc.so can have up to 192 bytes of IE TLS,
- other system libraries together can have up to 144 bytes of IE TLS.
- Some "optional" static TLS is available for opportunistic use.
The optional TLS is now tunable: rtld.optional_static_tls, so users
can directly affect the allocated static TLS size. (Note that module
unloading with dlclose does not reclaim static TLS. After the optional
TLS runs out, TLS access is no longer optimized to use static TLS.)
The default setting of rtld.optional_static_tls is 512 so the surplus
TLS is 3*192 + 4*144 + 512 = 1664 by default, the same as before.
Fixes BZ #25051.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The new static TLS surplus size computation is
surplus_tls = 192 * (nns-1) + 144 * nns + 512
where nns is controlled via the rtld.nns tunable. This commit
accounts audit modules too so nns = rtld.nns + audit modules.
rtld.nns should only include the namespaces required by the
application, namespaces for audit modules are accounted on top
of that so audit modules don't use up the static TLS that is
reserved for the application. This allows loading many audit
modules without tuning rtld.nns or using up static TLS, and it
fixes
FAIL: elf/tst-auditmany
Note that DL_NNS is currently a hard upper limit for nns, and
if rtld.nns + audit modules go over the limit that's a fatal
error. By default rtld.nns is 4 which allows 12 audit modules.
Counting the audit modules is based on existing audit string
parsing code, we cannot use GLRO(dl_naudit) before the modules
are actually loaded.
TLS_STATIC_SURPLUS is 1664 bytes currently which is not enough to
support DL_NNS (== 16) number of dynamic link namespaces, if we
assume 192 bytes of TLS are reserved for libc use and 144 bytes
are reserved for other system libraries that use IE TLS.
A new tunable is introduced to control the number of supported
namespaces and to adjust the surplus static TLS size as follows:
surplus_tls = 192 * (rtld.nns-1) + 144 * rtld.nns + 512
The default is rtld.nns == 4 and then the surplus TLS size is the
same as before, so the behaviour is unchanged by default. If an
application creates more namespaces than the rtld.nns setting
allows, then it is not guaranteed to work, but the limit is not
checked. So existing usage will continue to work, but in the
future if an application creates more than 4 dynamic link
namespaces then the tunable will need to be set.
In this patch DL_NNS is a fixed value and provides a maximum to
the rtld.nns setting.
Static linking used fixed 2048 bytes surplus TLS, this is changed
so the same contract is used as for dynamic linking. With static
linking DL_NNS == 1 so rtld.nns tunable is forced to 1, so by
default the surplus TLS is reduced to 144 + 512 = 656 bytes. This
change is not expected to cause problems.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add generic code to handle PT_GNU_PROPERTY notes. Invalid
content is ignored, _dl_process_pt_gnu_property is always called
after PT_LOAD segments are mapped and it has no failure modes.
Currently only one NT_GNU_PROPERTY_TYPE_0 note is handled, which
contains target specific properties: the _dl_process_gnu_property
hook is called for each property.
The old _dl_process_pt_note and _rtld_process_pt_note differ in how
the program header is read. The old _dl_process_pt_note is called
before PT_LOAD segments are mapped and _rtld_process_pt_note is called
after PT_LOAD segments are mapped. The old _rtld_process_pt_note is
removed and _dl_process_pt_note is always called after PT_LOAD
segments are mapped and now it has no failure modes.
The program headers are scanned backwards so that PT_NOTE can be
skipped if PT_GNU_PROPERTY exists.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The auditing interface identifies namespaces by their first loaded
module. Once the namespace is empty, it is no longer possible to signal
LA_ACT_CONSISTENT for it because the first loaded module is already gone
at that point.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The variable is placed in libc.so, and it can be true only in
an outer libc, not libcs loaded via dlmopen or static dlopen.
Since thread creation from inner namespaces does not work,
pthread_create can update __libc_single_threaded directly.
Using __libc_early_init and its initial flag, implementation of this
variable is very straightforward. A future version may reset the flag
during fork (but not in an inner namespace), or after joining all
threads except one.
Reviewed-by: DJ Delorie <dj@redhat.com>
Register rseq TLS for each thread (including main), and unregister for
each thread (excluding main). "rseq" stands for Restartable Sequences.
See the rseq(2) man page proposed here:
https://lkml.org/lkml/2018/9/19/647
Those are based on glibc master branch commit 3ee1e0ec5c.
The rseq system call was merged into Linux 4.18.
The TLS_STATIC_SURPLUS define is increased to leave additional room for
dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working.
The increase (76 bytes) is larger than 32 bytes because it has not been
increased in quite a while. The cost in terms of additional TLS storage
is quite significant, but it will also obscure some initial-exec-related
dlopen failures.
Now that ldconfig defaults to the new format (only), check for it
first. Also apply the corruption check added in commit 2954daf00b
("Add more checks for valid ld.so.cache file (bug 18093)") to the
new-format-only case.
Suggested-by: Josh Triplett <josh@joshtriplett.org>
The existing macros are fragile and expect local variables with a
certain name. Fix this by defining them as functions with default
implementation in a new header dl-runtime.h which arches can override
if need be.
This came up during ARC port review, hence the need for argument pltgot
in reloc_index() which is not needed by existing ports.
This patch potentially only affects hppa/x86 ports,
build tested for both those configs and a few more.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
There are:
#define TUNABLE_SET_VAL_IF_VALID_RANGE(__cur, __val, __type) \
({ \
__type min = (__cur)->type.min; \
__type max = (__cur)->type.max; \
\
if ((__type) (__val) >= min && (__type) (val) <= max) \
^^^ Should be __val
{ \
(__cur)->val.numval = val; \
^^^ Should be __val
(__cur)->initialized = true; \
} \
})
Luckily since all TUNABLE_SET_VAL_IF_VALID_RANGE usages are
TUNABLE_SET_VAL_IF_VALID_RANGE (cur, val, int64_t);
this didn't cause any issues.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Historically, this mechanism was used to process "nosegneg"
subdirectories, and it is still used to include the "tls"
subdirectories. With nosegneg support gone from ld.so, this is part
no longer useful.
The entire mechanism is not well-designed because it causes the
meaning of hwcap bits in ld.so.cache to depend on the kernel version
that was used to generate the cache, which makes it difficult to use
this mechanism for anything else in the future.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This was only ever used for the "nosegneg" flag. This approach for
passing hardware capability information creates a subtle dependency
between the kernel and userspace, and ld.so.cache contents. It seems
inappropriate for toady, where people expect to be able to run
system images which very different kernel versions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This change makes it easier to set a breakpoint on these calls.
This also addresses the issue that including <ldsodefs.h> without
<unistd.h> does not result usable _dl_*printf macros because of the
use of the STD*_FILENO macros there.
(The private symbol for _dl_fatal_printf will go away again
once the exception handling implementation is unified between
libc and ld.so.)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These property values are specified by the AArch64 ELF ABI and
binutils can create binaries marked with them.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This was originally added to support binutils older than version
2.22:
<https://sourceware.org/ml/libc-alpha/2010-12/msg00051.html>
Since 2.22 is older than the minimum required binutils version
for building glibc, we no longer need this. (The changes do
not impact the statically linked startup code.)
If we try to run constructors before relocation, this is always
a dynamic linker bug. An assert is easier to notice than a call
via an invalid function pointer (which may not even produce a valid
call stack).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
1. Include <dl-procruntime.c> to get architecture specific initializer in
rtld_global.
2. Change _dl_x86_feature_1[2] to _dl_x86_feature_1.
3. Add _dl_x86_feature_control after _dl_x86_feature_1, which is a
struct of 2 bitfields for IBT and SHSTK control
This fixes [BZ #25887].
The second call does not do anything because the data structures have
already been resized by the call that comes before the demarcation
point. Fixes commit a509eb117f
("Avoid late dlopen failure due to scope, TLS slotinfo updates
[BZ #25112]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Improve the commentary to aid future developers who will stumble
upon this novel, yet not always perfect, mechanism to support
alternative formats for long double.
Likewise, rename __LONG_DOUBLE_USES_FLOAT128 to
__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI now that development work
has settled down. The command used was
git grep -l __LONG_DOUBLE_USES_FLOAT128 ':!./ChangeLog*' | \
xargs sed -i 's/__LONG_DOUBLE_USES_FLOAT128/__LDOUBLE_REDIRECTS_TO_FLOAT128_ABI/g'
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
The rseq initialization should happen only for the libc in the base
namespace (in the dynamic case) or the statically linked libc. The
__libc_multiple_libcs flag does not quite cover this case at present,
so this commit introduces a flag argument to __libc_early_init,
indicating whether the libc being libc is the primary one (of the main
program).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This function is defined in libc.so, and the dynamic loader calls
right after relocation has been finished, before any ELF constructors
or the preinit function is invoked. It is also used in the static
build for initializing parts of the static libc.
To locate __libc_early_init, a direct symbol lookup function is used,
_dl_lookup_direct. It does not search the entire symbol scope and
consults merely a single link map. This function could also be used
to implement lookups in the vDSO (as an optimization).
A per-namespace variable (libc_map) is added for locating libc.so,
to avoid repeated traversals of the search scope. It is similar to
GL(dl_initfirst). An alternative would have been to thread a context
argument from _dl_open down to _dl_map_object_from_fd (where libc.so
is identified). This could have avoided the global variable, but
the change would be larger as a result. It would not have been
possible to use this to replace GL(dl_initfirst) because that global
variable is used to pass the function pointer past the stack switch
from dl_main to the main program. Replacing that requires adding
a new argument to _dl_init, which in turn needs changes to the
architecture-specific libc.so startup code written in assembler.
__libc_early_init should not be used to replace _dl_var_init (as
it exists today on some architectures). Instead, _dl_lookup_direct
should be used to look up a new variable symbol in libc.so, and
that should then be initialized from the dynamic loader, immediately
after the object has been loaded in _dl_map_object_from_fd (before
relocation is run). This way, more IFUNC resolvers which depend on
these variables will work.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
MIPS needs to ignore certain existing symbols during symbol lookup.
The old scheme uses the ELF_MACHINE_SYM_NO_MATCH macro, with an
inline function, within its own header, with a sysdeps override for
MIPS. This allows re-use of the function from another file (without
having to include <dl-machine.h> or providing the default definition
for ELF_MACHINE_SYM_NO_MATCH).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
GNU ld and gold's -Map include a line like:
path/to/build/libc_pic.a(check_fds.os)
lld -Map does not have the archive member list, but we can still derive the
members from the following output
VMA LMA Size Align Out In Symbol
...
1a1c0 1a1c0 e2 16 path/to/build/libc_pic.a(check_fds.os):(.text)
binutils ld has supported --audit, --depaudit for a long time,
only support in glibc has been missing.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
All list elements are colon-separated strings, and there is a hard
upper limit for the number of audit modules, so it is possible to
pre-allocate a fixed-size array of strings to which the LD_AUDIT
environment variable and --audit arguments are added.
Also eliminate the global variables for the audit list because
the list is only needed briefly during startup.
There is a slight behavior change: All duplicate LD_AUDIT environment
variables are now processed, not just the last one as before. However,
such environment vectors are invalid anyway.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The ldbl redirects for ieee128 have some jagged edges when
inspecting and manipulating symbols directly.
e.g asprintf is unconditionally redirected to __asprintfieee128
thus any tests relying on GCC's redirect behavior will encounter
problems if they inspect the symbol names too closely.
I've mitigated tests which expose the limitations of the
ldbl -> f128 redirects by giving them knowledge about the
redirected symbol names.
Hopefully there isn't much user code which depends on this
implementation specific behavior.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
