As noted in bug 17786, MIPS o32 struct stat has the wrong type of
st_dev. This patch XFAILs that test in the conformtest expectations
for this case (the test still fails after the patch because there's
also a similar issue for st_rdev that needs reporting and XFAILing
separately, and the bug should not be closed without an actual fix,
not just XFAILing).
Tested for mips with build-many-glibcs.py.
[BZ #17786]
* sysdeps/unix/sysv/linux/mips/mips32/Makefile: New file.
* conform/data/sys/stat.h-data (stat.st_dev): XFAIL for
mips-o32-linux.
As noted in bug 21260, sysdeps/unix/sysv/linux/alpha/bits/netdb.h
defines struct netent with n_net of type unsigned long instead of the
correct uint32_t. This patch XFAILs that test in the conformtest
expectations for alpha. (This is not a fix for the bug, and it should
not be closed without an actual fix.)
Tested for alpha with build-many-glibcs.py.
[BZ #21260]
* sysdeps/unix/sysv/linux/alpha/Makefile
[$(subdir) = conform] (conformtest-xfail-conds): New variable.
This patch fixes multiple issues of test-errno.c (9a56f87183):
- Rename Linux test-errno.c to test-errno-linux.c to avoid build
the same source for both tests.
- Add a mlock check for 32 bits build running on 64 bits kernels.
Althuough man pages states that mlock fails with EINVAL if final
address overflows, kernels does not return it for aforementioned
condition (it returns ENOMEM instead). Although it seems to be
a kernel issue for compat syscall handling, I think it is worth
to still check syscall return and document the behavior.
- Initialize option lenght for setsockopt check.
- Change open test from EINVAL to EISDIR.
Checked on x86_64-linux-gnu and i686-linux-gnu (running on 64 bits
kernel).
* posix/test-errno.c (do_test): Initialize setsockopt optlen.
* sysdeps/unix/sysv/linux/test-errno.c: Move to ...
* sysdeps/unix/sysv/linux/test-errno-linux.c: ... here.
(test_wrp_rv): Fix format.
(test_wrp_rv2): New macro.
(do_test): Handle mlock return on 64 bits kernels with 32 bits
binaries.
This patch fixes the missing posix_fadvise64 symbol for static build
required for _FILE_OFFSET_BITS=64 on mips64 build.
Checked on a mips64-linux-gnu build with run-built-tests=no.
[BZ #21232]
* sysdeps/unix/sysv/linux/mips/mips64/n64/posix_fadvise64.c: Add
posix_fadvise64 weak_alias for static build.
Linux 4.10 adds IPV6_RECVFRAGSIZE to include/uapi/linux/in6.h, which
shows that several such IPV6_* macros are missing from glibc's
sysdeps/unix/sysv/linux/bits/in.h (while older ones are present). I
don't know whether any of these might be deliberately omitted, but
this patch adds what appear to be the missing more recent macros to
glibc.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/in.h (IPV6_AUTOFLOWLABEL): New
macro.
(IPV6_ADDR_PREFERENCES): Likewise.
(IPV6_MINHOPCOUNT): Likewise.
(IPV6_ORIGDSTADDR): Likewise.
(IPV6_RECVORIGDSTADDR): Likewise.
(IPV6_TRANSPARENT): Likewise.
(IPV6_UNICAST_IF): Likewise.
(IPV6_RECVFRAGSIZE): Likewise.
Fix 60f9423b type for alpha kernel-features.h definition.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_RECV_SYSCALL): Replace duplicate by
__ASSUME_SEND_SYSCALL.
This patch consolidates the send Linux syscall implementation on
sysdeps/unix/sysv/linux/send{to}.c. The changes are:
1. Remove send from auto-generation syscalls.list on the architecture
that uses __NR_send.
2. Define __NR_send for architectures that supports it. It was done instead
of defining in default kernel-features.h because current Linux practice
for new ports are to implement only __NR_sendto [1] and it will
require adding new kernel-features for ports that do not require it
(aarch64 for instance).
3. Remove __ASSUME_SENDTO_FOR_SEND_SYSCALL and decide to use
__NR_sendto for send generation based on __ASSUME_SENDTO_SYSCALL.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
aarch64-linux-gnu, arm-linux-gnueabihf, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/sysdep.h (HAVE_INTERNAL_SEND_SYMBOL):
Define.
* sysdeps/unix/sysv/linux/aarch64/sysdep.h
(HAVE_INTERNAL_SEND_SYMBOL): Undefine.
* sysdeps/unix/sysv/linux/nios2/sysdep.h
(HAVE_INTERNAL_SEND_SYMBOL): Likewise.
* sysdeps/unix/sysv/linux/tile/sysdep.h
(HAVE_INTERNAL_SEND_SYMBOL): Likewise.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_RECV_SYSCALL): Define.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/i386/kernel-features.h
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Remove define.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/alpha/syscalls.list: Remove send from
auto-generation list.
* sysdeps/unix/sysv/linux/arm/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list: Likewike.
* sysdeps/unix/sysv/linux/mips/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/send.c: Simplify includes.
(__ASSUME_SENDTO_FOR_SEND_SYSCALL): Replace by
__ASSUME_SENDTO_SYSCALL.
* sysdeps/unix/sysv/linux/x86_64/send.c: Remove file.
* sysdeps/unix/sysv/linux/mips/mips64/send.c: Likewise.
* sysdeps/unix/sysv/linux/generic/send.c: Likewise.
This patch consolidates the recv Linux syscall implementation on
sysdeps/unix/sysv/linux/recv.c. The changes are:
1. Remove recv from auto-generation syscalls.list on the architecture
that uses __NR_recv.
2. Define __NR_recv for architectures that supports it. It was done
instead of defining in default kernel-features.h because current Linux
practice for new ports is to implement only __NR_recvfrom [1] and it will
require adding new kernel-features for ports that do not require it
(aarch64 for instance).
3. Remove __ASSUME_RECVFROM_FOR_RECV_SYSCALL and decide to use
__NR_recvfrom for recv generation based on __ASSUME_RECVFROM_SYSCALL.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
aarch64-linux-gnu, arm-linux-gnueabihf, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/alpha/syscalls.list: Remove recv from
auto-generation list.
* sysdeps/unix/sysv/linux/arm/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/mips/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_RECV_SYSCALL): New define.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
(__ASSUME_RECV_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/i386/kernel-features.h
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Remove define.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Remove define.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
(__ASSUME_RECVFROM_FOR_RECV_SYSCALL): Remove define.
* sysdeps/unix/sysv/linux/generic/recv.c: Remove file.
* sysdeps/unix/sysv/linux/mips/mips64/recv.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/recv.c: Likewise.
* sysdeps/unix/sysv/linux/recv.c: Simplify includes.
(__libc_recv): Use __ASSUME_RECVFROM_SYSCALL instead of
__ASSUME_RECVFROM_FOR_RECV_SYSCALL to issue recvfrom syscall.
[1] include/asm-generic/unistd.h (__ARCH_WANT_SYSCALL_DEPRECATED)
This patch consolidates the connect Linux syscall implementation on
sysdeps/unix/sysv/linux/accept.c. The changes are:
1. Remove connect from auto-generation syscalls.list on the architecture
that uses __NR_connect.
2. Define __NR_connect as default (__ASSUME_CONNECT_SYSCALL) and undef for
architectures that do not support it.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
aarch64-linux-gnu, arm-linux-gnueabihf, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/alpha/syscalls.list: Remove connect from
auto-generation list.
* sysdeps/unix/sysv/linux/arm/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/generic/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/mips/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/connect.c: Simplify include list.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_CONNECT_SYSCALL): Define.
* sysdeps/unix/sysv/linux/i386/kernel-features.h
(__ASSUME_CONNECT_SYSCALL): Undef if kernel does not support it.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_CONNECT_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
(__ASSUME_CONNECT_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h
(__ASSUME_CONNECT_SYSCALL): Likewise.
This patch consolidates the accept Linux syscall implementation on
sysdeps/unix/sysv/linux/accept.c. The changes are:
1. Remove accept from auto-generation syscalls.list on the architecture
that uses __NR_accept.
2. Define __NR_accept as default (__ASSUME_ACCEPT_SYSCALL) and undef for
architectures that do not support it.
3. Remove __ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL and decide to use
__NR_accept4 for accept generation based on __ASSUME_ACCEPT4_SYSCALL.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
aarch64-linux-gnu, arm-linux-gnueabihf, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/accept.c (__libc_accept): Replace
__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL by __ASSUME_ACCEPT4_SYSCALL.
* sysdeps/unix/sysv/linux/alpha/syscalls.list: Remove accept from
auto-generation list.
* sysdeps/unix/sysv/linux/arm/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/generic/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/mips/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/kernel-features.h
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Remove define.
(__ASSUME_ACCEPT_SYSCALL): Undefine.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_ACCEPT_SYSCALL): New define.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Remove define.
(__ASSUME_ACCEPT_SYSCALL): Define wheter kernel version supports.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_ACCEPT_SYSCALL): Define.
* sysdeps/unix/sysv/linux/powerpc/kernel-features.h
(__ASSUME_ACCEPT_SYSCALL): Undefine.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
(__ASSUME_ACCEPT4_FOR_ACCEPT_SYSCALL): Remove define.
(__ASSUME_ACCEPT_SYSCALL): Undefine.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_ACCEPT_SYSCALL): Undefine.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h
(__ASSUME_ACCEPT_SYSCALL): Undefine for 32 bits.
This patch adds tests for POSIX and Linux specific syscalls
that implemented with syscall templates machinery. The reason
of tests is to receive the expected error code and test if
it's handled properly by glibc.
2017-03-08 Yury Norov <ynorov@caviumnetworks.com>
Zack Weinberg <zackw@panix.com>
* posix/test-errno.c: New file.
* posix/Makefile (tests): Add test-errno.
* sysdeps/unix/sysv/linux/test-errno.c: New file.
* sysdeps/unix/sysv/linux/Makefile (tests): Add test-errno.
In 1e5834c38a ("Refactor Linux ipc_priv header") a different
approach to passing __IPC_64 as zero was created. Hppa kernel ABI
requires to oass __IPC_64 as zero since it does not set
CONFIG_ARCH_WANT_IPC_PARSE_VERSION in the kernel.
Checked on hppa-linux-gnu with some adjustments to avoid BZ#21016
(basically by removing hppa compat implementations and adjusting
required headers).
* sysdeps/unix/sysv/linux/hppa/ipc_priv.h: New file.
posix/wordexp-test.c used libc-internal.h for PTR_ALIGN_DOWN; similar
to what was done with libc-diag.h, I have split the definitions of
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and PTR_ALIGN_DOWN
to a new header, libc-pointer-arith.h.
It then occurred to me that the remaining declarations in libc-internal.h
are mostly to do with early initialization, and probably most of the
files including it, even in the core code, don't need it anymore. Indeed,
only 19 files actually need what remains of libc-internal.h. 23 others
need libc-diag.h instead, and 12 need libc-pointer-arith.h instead.
No file needs more than one of them, and 16 don't need any of them!
So, with this patch, libc-internal.h stops including libc-diag.h as
well as losing the pointer arithmetic macros, and all including files
are adjusted.
* include/libc-pointer-arith.h: New file. Define
cast_to_integer, ALIGN_UP, ALIGN_DOWN, PTR_ALIGN_UP, and
PTR_ALIGN_DOWN here.
* include/libc-internal.h: Definitions of above macros
moved from here. Don't include libc-diag.h anymore either.
* posix/wordexp-test.c: Include stdint.h and libc-pointer-arith.h.
Don't include libc-internal.h.
* debug/pcprofile.c, elf/dl-tunables.c, elf/soinit.c, io/openat.c
* io/openat64.c, misc/ptrace.c, nptl/pthread_clock_gettime.c
* nptl/pthread_clock_settime.c, nptl/pthread_cond_common.c
* string/strcoll_l.c, sysdeps/nacl/brk.c
* sysdeps/unix/clock_settime.c
* sysdeps/unix/sysv/linux/i386/get_clockfreq.c
* sysdeps/unix/sysv/linux/ia64/get_clockfreq.c
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c
* sysdeps/unix/sysv/linux/sparc/sparc64/get_clockfreq.c:
Don't include libc-internal.h.
* elf/get-dynamic-info.h, iconv/loop.c
* iconvdata/iso-2022-cn-ext.c, locale/weight.h, locale/weightwc.h
* misc/reboot.c, nis/nis_table.c, nptl_db/thread_dbP.h
* nscd/connections.c, resolv/res_send.c, soft-fp/fmadf4.c
* soft-fp/fmasf4.c, soft-fp/fmatf4.c, stdio-common/vfscanf.c
* sysdeps/ieee754/dbl-64/e_lgamma_r.c
* sysdeps/ieee754/dbl-64/k_rem_pio2.c
* sysdeps/ieee754/flt-32/e_lgammaf_r.c
* sysdeps/ieee754/flt-32/k_rem_pio2f.c
* sysdeps/ieee754/ldbl-128/k_tanl.c
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
* sysdeps/ieee754/ldbl-96/k_tanl.c, sysdeps/nptl/futex-internal.h:
Include libc-diag.h instead of libc-internal.h.
* elf/dl-load.c, elf/dl-reloc.c, locale/programs/locarchive.c
* nptl/nptl-init.c, string/strcspn.c, string/strspn.c
* malloc/malloc.c, sysdeps/i386/nptl/tls.h
* sysdeps/nacl/dl-map-segments.h, sysdeps/x86_64/atomic-machine.h
* sysdeps/unix/sysv/linux/spawni.c
* sysdeps/x86_64/nptl/tls.h:
Include libc-pointer-arith.h instead of libc-internal.h.
* elf/get-dynamic-info.h, sysdeps/nacl/dl-map-segments.h
* sysdeps/x86_64/atomic-machine.h:
Add multiple include guard.
These are a grab bag of changes where the testsuite was using internal
symbols of some variety, but this was straightforward to fix, and the
fixed code should work with or without the change to compile the
testsuite under _ISOMAC.
Four of these are just more #include adjustments, but I want to highlight
sysdeps/powerpc/fpu/tst-setcontext-fpscr.c, which appears to have been
written before the advent of sys/auxv.h. I think a big chunk of this file
could be replaced by a simple call to getauxval, but I'll let someone who
actually has a powerpc machine to test on do that.
dlfcn/tst-dladdr.c was including ldsodefs.h just so it could use
DL_LOOKUP_ADDRESS to print an additional diagnostic; as requested by Carlos,
I have removed this.
math/test-misc.c was using #ifndef NO_LONG_DOUBLE, which is an internal
configuration macro, to decide whether to do certain tests involving
'long double'. I changed the test to #if LDBL_MANT_DIG > DBL_MANT_DIG
instead, which uses only public float.h macros and is equivalent on
all supported platforms. (Note that NO_LONG_DOUBLE doesn't mean 'the
compiler doesn't support long double', it means 'long double is the
same as double'.)
tst-writev.c has a configuration macro 'ARTIFICIAL_LIMIT' that the
Makefiles are expected to define, and sysdeps/unix/sysv/linux/Makefile
was using the internal __getpagesize in the definition; changed to
sysconf(_SC_PAGESIZE) which is the POSIX equivalent.
ia64-linux doesn't supply 'clone', only '__clone2', which is not
defined in the public headers(!) All the other clone tests have local
extern declarations of __clone2, but tst-clone.c doesn't; it was
getting away with this because include/sched.h does declare __clone2.
* nss/tst-cancel-getpwuid_r.c: Include nss.h.
* string/strcasestr.c: No need to include config.h.
* sysdeps/powerpc/fpu/tst-setcontext-fpscr.c: Include
sys/auxv.h. Don't include sysdep.h.
* sysdeps/powerpc/tst-set_ppr.c: Don't include dl-procinfo.h.
* dlfcn/tst-dladdr.c: Don't include ldsodefs.h. Don't use
DL_LOOKUP_ADDRESS.
* math/test-misc.c: Instead of testing NO_LONG_DOUBLE, test whether
LDBL_MANT_DIG is greater than DBL_MANT_DIG.
* sysdeps/unix/sysv/linux/Makefile (CFLAGS-tst-writev.c): Use
sysconf (_SC_PAGESIZE) instead of __getpagesize in definition
of ARTIFICIAL_LIMIT.
* sysdeps/unix/sysv/linux/tst-clone.c [__ia64__]: Add extern
declaration of __clone2.
In Linux 4.10, timerfd constants moved to a new uapi header, which
showed up that glibc's sys/timerfd.h is missing the old flag
TFD_TIMER_CANCEL_ON_SET. This patch adds that flag to glibc's header.
Tested for x86_64.
* sysdeps/unix/sysv/linux/sys/timerfd.h (TFD_TIMER_CANCEL_ON_SET):
New enum constant and macro.
Linux 4.10 adds a new IP_RECVFRAGSIZE macro to
include/uapi/linux/in.h. This patch adds it to glibc's
sysdeps/unix/sysv/linux/bits/in.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/in.h (IP_RECVFRAGSIZE): New macro.
Commit 6b1df8b27f fixed the -OS build issue on i386 (BZ#20729) by
expliciting disabling frame pointer (-fomit-frame-pointer) on the
faulty objects. Although it does fix the issue, it is a subpar
workaround that adds complexity in build process (a rule for each
object to add the required compiler option and pontentially more
rules for objects that call {INLINE,INTERNAL}_SYSCALL) and does not
allow the implementations to get all the possible debug/calltrack
information possible (used mainly in debuggers and performance
measurement tools).
This patch fixes it by adding an explicit configure check to see
if -fno-omit-frame-pointer is set and to act accordingly (set or
not OPTIMIZE_FOR_GCC_5). The make rules is simplified and only
one is required: to add libc-do-syscall on loader due mmap
(which will be empty anyway for default build with
-fomit-frame-pointer).
Checked on i386-linux-gnu with GCC 6.2.1 with CFLAGS sets as
'-Os', '-O2 -fno-omit-frame-pointer', and '-O2 -fomit-frame-pointer'.
For '-Os' the testsuite issues described by BZ#19463 and BZ#15105
still applied.
It fixes BZ #21029, although it is marked as duplicated of #20729
(I reopened to track this cleanup).
[BZ #21029]
* config.h.in [CAN_USE_REGISTER_ASM_EBP]: New define.
* sysdeps/unix/sysv/linux/i386/Makefile
[$(subdir) = elf] (sysdep-dl-routines): Add libc-do-syscall.
(uses-6-syscall-arguments): Remove.
[$(subdir) = misc] (CFLAGS-epoll_pwait.o): Likewise.
[$(subdir) = misc] (CFLAGS-epoll_pwait.os): Likewise.
[$(subdir) = misc] (CFLAGS-mmap.o): Likewise.
[$(subdir) = misc] (CFLAGS-mmap.os): Likewise.
[$(subdir) = misc] (CFLAGS-mmap64.o): Likewise.
[$(subdir) = misc] (CFLAGS-mmap64.os): Likewise.
[$(subdir) = misc] (CFLAGS-pselect.o): Likewise.
[$(subdir) = misc] (cflags-pselect.o): Likewise.
[$(subdir) = misc] (cflags-pselect.os): Likewise.
[$(subdir) = misc] (cflags-rtld-mmap.os): Likewise.
[$(subdir) = sysvipc] (cflags-semtimedop.o): Likewise.
[$(subdir) = sysvipc] (cflags-semtimedop.os): Likewise.
[$(subdir) = io] (CFLAGS-posix_fadvise64.o): Likewise.
[$(subdir) = io] (CFLAGS-posix_fadvise64.os): Likewise.
[$(subdir) = io] (CFLAGS-posix_fallocate.o): Likewise.
[$(subdir) = io] (CFLAGS-posix_fallocate.os): Likewise.
[$(subdir) = io] (CFLAGS-posix_fallocate64.o): Likewise.
[$(subdir) = io] (CFLAGS-posix_fallocate64.os): Likewise.
[$(subdir) = io] (CFLAGS-sync_file_range.o): Likewise.
[$(subdir) = io] (CFLAGS-sync_file_range.os): Likewise.
[$(subdir) = io] (CFLAGS-fallocate.o): Likewise.
[$(subdir) = io] (CFLAGS-fallocate.os): Likewise.
[$(subdir) = io] (CFLAGS-fallocate64.o): Likewise.
[$(subdir) = io] (CFLAGS-fallocate64.os): Likewise.
[$(subdir) = nptl] (CFLAGS-pthread_rwlock_timedrdlock.o):
Likewise.
[$(subdir) = nptl] (CFLAGS-pthread_rwlock_timedrdlock.os):
Likewise.
[$(subdir) = nptl] (CFLAGS-pthread_rwlock_timedrwlock.o):
Likewise.
[$(subdir) = nptl] (CFLAGS-pthread_rwlock_timedrwlock.os):
Likewise.
[$(subdir) = nptl] (CFLAGS-sem_wait.o): Likewise.
[$(subdir) = nptl] (CFLAGS-sem_wait.os): Likewise.
[$(subdir) = nptl] (CFLAGS-sem_timedwait.o): Likewise.
[$(subdir) = nptl] (CFLAGS-sem_timedwait.os): Likewise.
* sysdeps/unix/sysv/linux/i386/configure.ac: Add check if compiler allows
ebp on inline assembly.
* sysdeps/unix/sysv/linux/i386/configure: Regenerate.
* sysdeps/unix/sysv/linux/i386/sysdep.h (OPTIMIZE_FOR_GCC_5):
Set if CAN_USE_REGISTER_ASM_EBP is set.
(check_consistency): Likewise.
* crypt/md5.h: Test _LIBC with #if defined, not #if.
* dirent/opendir-tst1.c: Include sys/stat.h.
* dirent/tst-fdopendir.c: Include sys/stat.h.
* dirent/tst-fdopendir2.c: Include stdlib.h.
* dirent/tst-scandir.c: Include stdbool.h.
* elf/tst-auditmod1.c: Include link.h and stddef.h.
* elf/tst-tls15.c: Include stdlib.h.
* elf/tst-tls16.c: Include stdlib.h.
* elf/tst-tls17.c: Include stdlib.h.
* elf/tst-tls18.c: Include stdlib.h.
* iconv/tst-iconv6.c: Include endian.h.
* iconvdata/bug-iconv11.c: Include limits.h.
* io/test-utime.c: Include stdint.h.
* io/tst-faccessat.c: Include sys/stat.h.
* io/tst-fchmodat.c: Include sys/stat.h.
* io/tst-fchownat.c: Include sys/stat.h.
* io/tst-fstatat.c: Include sys/stat.h.
* io/tst-futimesat.c: Include sys/stat.h.
* io/tst-linkat.c: Include sys/stat.h.
* io/tst-mkdirat.c: Include sys/stat.h and stdbool.h.
* io/tst-mkfifoat.c: Include sys/stat.h and stdbool.h.
* io/tst-mknodat.c: Include sys/stat.h and stdbool.h.
* io/tst-openat.c: Include stdbool.h.
* io/tst-readlinkat.c: Include sys/stat.h.
* io/tst-renameat.c: Include sys/stat.h.
* io/tst-symlinkat.c: Include sys/stat.h.
* io/tst-unlinkat.c: Include stdbool.h.
* libio/bug-memstream1.c: Include stdlib.h.
* libio/bug-wmemstream1.c: Include stdlib.h.
* libio/tst-fwrite-error.c: Include stdlib.h.
* libio/tst-memstream1.c: Include stdlib.h.
* libio/tst-memstream2.c: Include stdlib.h.
* libio/tst-memstream3.c: Include stdlib.h.
* malloc/tst-interpose-aux.c: Include stdint.h.
* misc/tst-preadvwritev-common.c: Include sys/stat.h.
* nptl/tst-basic7.c: Include limits.h.
* nptl/tst-cancel25.c: Include pthread.h, not pthreadP.h.
* nptl/tst-cancel4.c: Include stddef.h, limits.h, and sys/stat.h.
* nptl/tst-cancel4_1.c: Include stddef.h.
* nptl/tst-cancel4_2.c: Include stddef.h.
* nptl/tst-cond16.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond18.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond4.c: Include stdint.h.
* nptl/tst-cond6.c: Include stdint.h.
* nptl/tst-stack2.c: Include limits.h.
* nptl/tst-stackguard1.c: Include stddef.h.
* nptl/tst-tls4.c: Include stdint.h. Don't include tls.h.
* nptl/tst-tls4moda.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls4modb.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls5.h: Include stddef.h. Don't include stdlib.h or tls.h.
* posix/tst-getaddrinfo2.c: Include stdio.h.
* posix/tst-getaddrinfo5.c: Include stdio.h.
* posix/tst-pathconf.c: Include sys/stat.h.
* posix/tst-posix_fadvise-common.c: Include stdint.h.
* posix/tst-preadwrite-common.c: Include sys/stat.h.
* posix/tst-regex.c: Include stdint.h.
Don't include spawn.h or spawn_int.h.
* posix/tst-regexloc.c: Don't include spawn.h or spawn_int.h.
* posix/tst-vfork3.c: Include sys/stat.h.
* resolv/tst-bug18665-tcp.c: Include stdlib.h.
* resolv/tst-res_hconf_reorder.c: Include stdlib.h.
* resolv/tst-resolv-search.c: Include stdlib.h.
* stdio-common/tst-fmemopen2.c: Include stdint.h.
* stdio-common/tst-vfprintf-width-prec.c: Include stdlib.h.
* stdlib/test-canon.c: Include sys/stat.h.
* stdlib/tst-tls-atexit.c: Include stdbool.h.
* string/test-memchr.c: Include stdint.h.
* string/tst-cmp.c: Include stdint.h.
* sysdeps/pthread/tst-timer.c: Include stdint.h.
* sysdeps/unix/sysv/linux/tst-sync_file_range.c: Include stdint.h.
* sysdeps/wordsize-64/tst-writev.c: Include limits.h and stdint.h.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/tst-auditmod10b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod3b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod4b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod5b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6c.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod7b.c: Include link.h and stddef.h.
* time/clocktest.c: Include stdint.h.
* time/tst-posixtz.c: Include stdint.h.
* timezone/tst-timezone.c: Include stdint.h.
Add PTRACE_EVENT_STOP value to Linux's sys/ptrace.h, modify related
comments accordingly.
This constant initially appeared in Linux 3.1 (kernel commit 3544d72a,
"ptrace: implement PTRACE_SEIZE") but its value has changed later
in Linux 3.4 (kernel commit 5cdf389a, "ptrace: renumber
PTRACE_EVENT_STOP so that future new options and events can match").
The comment is also taken from the above commit.
This constant is used by e.g. strace, CRIU, Mozilla RR.
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h (__ptrace_eventcodes):
Add PTRACE_EVENT_STOP.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/tile/sys/ptrace.h: Likewise.
It is no longer needed to preserve the flags parameter to `clone' since
the commit c579f48edb (Remove cached
PID/TID in clone).
Testing was performed successfully on sparcv9/Linux.
[BZ #21075]
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S (__clone): Remove
unused assignment.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S (__clone): Likewise.
As noted by c1f0601389, previous posix_fadvise consolidation
broke on mips o32. As stated in commit message, MIPS o32 only defines
__NR_fadvise64 and it is behaves like __NR_fadvise64_64.
This patches consolidates both ARM and mips o32 version by fixing
the ARM used option (__NR_fadvise64_64 withouth the alignment required
by abi) and added another option, __ASSUME_FADVISE64_AS_64_64,
which is used on mips o32.
When this option is used, posix_fadvise will use __NR_fadvise64_64
behavior (by defining or not __ASSUME_FADVISE64_64_6ARG). For
mips, if __NR_fadvise64_64 is not defined, __NR_fadvise will be used.
I also updated the posix_fadvise comments to explain better the
different kernel abi used in the supported architectures.
I checked with a mips o32 and verified that posix_fadvise.o is
indeed using 7 argument syscall with the expected argument position.
I also checked on i686-linux-gnu and arm-gnu-eabihf.
* sysdeps/unix/sysv/linux/arm/posix_fadvise.c: Remove file.
* sysdeps/unix/sysv/linux/mips/mips32/posix_fadvise.c: Likewise.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
(__ASSUME_FADVISE64_AS_64_64): Define.
* sysdeps/unix/sysv/linux/posix_fadvise.c [__NR_fadvise64]: Add
!defined __ASSUME_FADVISE64_AS_64_64 to use syscall issue.
[!__NR_fadvise64 && __ASSUME_FADVISE64_64_6ARG]: Remove
__ALIGNMENT_ARG usage.
[!__NR_fadvise64 && !__ASSUME_FADVISE64_64_6ARG]: Define
__NR_fadvise64_64 if it is not defined.
The commit documents the ownership rules around 'struct pthread' and
when a thread can read or write to the descriptor. With those ownership
rules in place it becomes obvious that pd->stopped_start should not be
touched in several of the paths during thread startup, particularly so
for detached threads. In the case of detached threads, between the time
the thread is created by the OS kernel and the creating thread checks
pd->stopped_start, the detached thread might have already exited and the
memory for pd unmapped. As a regression test we add a simple test which
exercises this exact case by quickly creating detached threads with
large enough stacks to ensure the thread stack cache is bypassed and the
stacks are unmapped. Before the fix the testcase segfaults, after the
fix it works correctly and completes without issue.
For a detailed discussion see:
https://www.sourceware.org/ml/libc-alpha/2017-01/msg00505.html
The problem is basically that sys/ucontext.h is defining R0..R15
which happens to conflict with some packages like Firefox when
trying to build on SH.
The very same problem existed on arm back then [1] and it was fixed by
renaming R0..R15 to REG_R0..REG_R15. This patch imploy a similar
strategy for SH.
Checked on sh4-linux-gnu with run-built-tests=no and I also got reports
that it fixes Firefox build on Debian sh4.
* sysdeps/unix/sysv/linux/sh/sh3/ucontext_i.sym: Use new REG_R*
constants instead of the old R* ones.
* sysdeps/unix/sysv/linux/sh/sh4/ucontext_i.sym: Likewise.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h (NGPREG): Rename...
(NGREG): ... to this, to fit in with other architectures.
(gpregset_t): Use new NGREG macro.
[__USE_GNU]: Remove condition; all architectures other than tile
are unconditional.
(R*): Rename to REG_R*.
This patch adjusts s390 specific lock elision code after review
of the following patches:
-S390: Use own tbegin macro instead of __builtin_tbegin.
(8bfc4a2ab4)
-S390: Use new __libc_tbegin_retry macro in elision-lock.c.
(53c5c3d5ac)
-S390: Optimize lock-elision by decrementing adapt_count at unlock.
(dd037fb3df)
The futex value is not tested before starting a transaction,
__glibc_likely is used instead of __builtin_expect and comments
are adjusted.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/htm.h: Adjust comments.
* sysdeps/unix/sysv/linux/s390/elision-unlock.c: Likewise.
* sysdeps/unix/sysv/linux/s390/elision-lock.c: Adjust comments.
(__lll_lock_elision): Do not test futex before starting a
transaction. Use __glibc_likely instead of __builtin_expect.
* sysdeps/unix/sysv/linux/s390/elision-trylock.c: Adjust comments.
(__lll_trylock_elision): Do not test futex before starting a
transaction. Use __glibc_likely instead of __builtin_expect.
MicroBlaze had clock_* functions exported from librt in glibc 2.18 and
2.19, as confirmed in
<https://sourceware.org/ml/libc-alpha/2017-01/msg00369.html>, and they
then disappeared in 2.20, presumably as a result of the fix
<https://sourceware.org/ml/libc-alpha/2014-02/msg00598.html> for a
Versions.def bug that had resulted in their unintended inclusion in
2.18 (followed by removal of the Versions.def mechanism that allowed
such bugs).
As they were released in that library, they should be considered part
of the GLIBC_2.18 ABI and so restored for the sake of any binaries
that expect them in that library. This patch restores them by adding
a MicroBlaze version of clock-compat.c that overrides SHLIB_COMPAT.
Tested (compilation only) with build-many-glibcs.py (where this fixes
the librt ABI test failure; elf/check-execstack still fails and still
needs architecture maintainer attention to fix it or XFAIL it with an
appropriate explanatory comment).
[BZ #21061]
* sysdeps/unix/sysv/linux/microblaze/clock-compat.c: New file.
The soft-float powerpc version of swapcontext does not restore the
signal mask, resulting in stdlib/tst-setcontext2 failing:
after getcontext
after setcontext
after swapcontext
FAIL: SIGUSR2 is blocked after swapcontext.
This patch fixes this by adjusting the arguments passed to
__sigprocmask so that it restores the saved signal mask as well as
saving the existing one. (For hard-float, this code is only used for
a compat symbol, not for the current version of swapcontext.)
Tested for soft-float powerpc.
[BZ #21045]
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S
(__CONTEXT_FUNC_NAME): Pass address of signal mask to be restored
to __sigprocmask.
In 1e5834c38a ("Refactor Linux ipc_priv header") a different
approach to passing __IPC_64 as zero was created. The tile
architecture also needs to pass __IPC_64 as zero since it does
not set CONFIG_ARCH_WANT_IPC_PARSE_VERSION in the kernel.
So create a minimal ipc_priv.h that specifies __IPC_64 as zero.
lll_robust_unlock on i386 and x86_64 first sets the futex word to
FUTEX_WAITERS|0 before calling __lll_unlock_wake, which will set the
futex word to 0. If the thread is killed between these steps, then the
futex word will be FUTEX_WAITERS|0, and the kernel (at least current
upstream) will not set it to FUTEX_OWNER_DIED|FUTEX_WAITERS because 0 is
not equal to the TID of the crashed thread.
The lll_robust_lock assembly code on i386 and x86_64 is not prepared to
deal with this case because the fastpath tries to only CAS 0 to TID and
not FUTEX_WAITERS|0 to TID; the slowpath simply waits until it can CAS 0
to TID or the futex_word has the FUTEX_OWNER_DIED bit set.
This issue is fixed by removing the custom x86 assembly code and using
the generic C code instead. However, instead of adding more duplicate
code to the custom x86 lowlevellock.h, the code of the lll_robust* functions
is inlined into the single call sites that exist for each of these functions
in the pthread_mutex_* functions. The robust mutex paths in the latter
have been slightly reorganized to make them simpler.
This patch is meant to be easy to backport, so C11-style atomics are not
used.
[BZ #20985]
* nptl/Makefile: Adapt.
* nptl/pthread_mutex_cond_lock.c (LLL_ROBUST_MUTEX_LOCK): Remove.
(LLL_ROBUST_MUTEX_LOCK_MODIFIER): New.
* nptl/pthread_mutex_lock.c (LLL_ROBUST_MUTEX_LOCK): Remove.
(LLL_ROBUST_MUTEX_LOCK_MODIFIER): New.
(__pthread_mutex_lock_full): Inline lll_robust* functions and adapt.
* nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock): Inline
lll_robust* functions and adapt.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_full): Likewise.
* sysdeps/nptl/lowlevellock.h (__lll_robust_lock_wait,
__lll_robust_lock, lll_robust_cond_lock, __lll_robust_timedlock_wait,
__lll_robust_timedlock, __lll_robust_unlock): Remove.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h (lll_robust_lock,
lll_robust_cond_lock, lll_robust_timedlock, lll_robust_unlock): Remove.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h (lll_robust_lock,
lll_robust_cond_lock, lll_robust_timedlock, lll_robust_unlock): Remove.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h (__lll_robust_lock_wait,
__lll_robust_lock, lll_robust_cond_lock, __lll_robust_timedlock_wait,
__lll_robust_timedlock, __lll_robust_unlock): Remove.
* nptl/lowlevelrobustlock.c: Remove file.
* nptl/lowlevelrobustlock.sym: Likewise.
* sysdeps/unix/sysv/linux/i386/lowlevelrobustlock.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/lowlevelrobustlock.S: Likewise.
The posix_fadvise consolidation broke posix_fadvise for MIPS o32, so
resulting in posix/tst-posix_fadvise failing.
MIPS o32 (and the other ABIs) has only the posix_fadvise64 syscall,
which acts like posix_fadvise64_64 (in the o32 case, because of the
alignment argument it's actually a 7-argument syscall). The generic
posix_fadvise implementation presumes that if __NR_fadvise64 is
defined, it's for the case where a single len argument is passed to
the syscall rather than two syscall arguments in the case of a 32-bit
system.
The generic posix_fadvise64 works fine for this case (defining
__NR_fadvise64_64 to __NR_fadvise64 as needed). ARM has a
posix_fadvise.c that uses __posix_fadvise64_l64 in posix_fadvise, and
that approach also works for MIPS o32, so this patch makes MIPS o32
include the ARM file.
Tested for MIPS o32.
* sysdeps/unix/sysv/linux/mips/mips32/posix_fadvise.c: New file.
This patch updates the MicroBlaze localplt.data based on the results
of a build with build-many-glibcs.py. This is simply an empirical
update; quite possibly the port could be optimized to remove more
local PLT entry usage.
Tested (compilation tests) with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/microblaze/localplt.data (__pread64):
Add libc.so PLT entry.
(__tls_get_addr): Make ld.so PLT entry optional.
As noted in bug 20126, MIPS n64 uses an incorrect implementation of
readahead intended for 32-bit systems. This patch adds a
syscalls.list entry to fix this. An updated version of the
consolidation patch
<https://sourceware.org/ml/libc-alpha/2016-09/msg00527.html> could
remove this syscalls.list entry again.
Tested with compilation (only) for mips64; the nature of the syscall
doesn't allow for a glibc test to detect this issue.
[BZ #21026]
* sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list
(readahead): New syscall entry.
The update of *adapt_count after the release of the lock causes a race
condition when thread A unlocks, thread B continues and destroys the
mutex, and thread A writes to *adapt_count.
The lseek consolidation broke lseek64 for MIPS n32, so resulting in
io/test-lfs failing with an incorrect return from ftello64. This
configuration uses the lseek syscall with a 64-bit return value; as
the C syscall macros return long, they cannot be used in this case and
so an assembly implementation is needed; accordingly, this patch adds
lseek64 back to syscalls.list for this configuration.
lseek was also broken, truncating the result without checking for
overflow. lseek however was already broken before the consolidation;
it aliased lseek64 so would return an out-of-range value, resulting in
architecturally undefined behavior in the caller if it tried to use a
non-sign-extended value with a 32-bit instruction. This patch adds a
custom lseek implementation in C for n32, which calls __lseek64 to get
the 64-bit value then checks for overflow.
Because the prior lseek breakage did not show in test results, and the
lseek64 breakage showed only indirectly through tests of ftello64,
test coverage was clearly inadequate. This patch extends
io/test-lfs.c to test the lseek64 return value (at a point where it
has already seeked over 2GB into a file), and then to test the lseek
return value (with the latter's expectations depending on whether
off_t is smaller than off64_t).
Tested for mips64 n32. Also tested test-lfs for x86_64 and x86, where
as expected it passes.
[BZ #21019]
* sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (lseek64):
New syscall entry.
* sysdeps/unix/sysv/linux/mips/mips64/n32/lseek.c: New file.
* io/test-lfs.c (do_test): Test offset returned from lseek64 and
lseek.
This is a new implementation for condition variables, required
after http://austingroupbugs.net/view.php?id=609 to fix bug 13165. In
essence, we need to be stricter in which waiters a signal or broadcast
is required to wake up; this couldn't be solved using the old algorithm.
ISO C++ made a similar clarification, so this also fixes a bug in
current libstdc++, for example.
We can't use the old algorithm anymore because futexes do not guarantee
to wake in FIFO order. Thus, when we wake, we can't simply let any
waiter grab a signal, but we need to ensure that one of the waiters
happening before the signal is woken up. This is something the previous
algorithm violated (see bug 13165).
There's another issue specific to condvars: ABA issues on the underlying
futexes. Unlike mutexes that have just three states, or semaphores that
have no tokens or a limited number of them, the state of a condvar is
the *order* of the waiters. A waiter on a semaphore can grab a token
whenever one is available; a condvar waiter must only consume a signal
if it is eligible to do so as determined by the relative order of the
waiter and the signal.
Therefore, this new algorithm maintains two groups of waiters: Those
eligible to consume signals (G1), and those that have to wait until
previous waiters have consumed signals (G2). Once G1 is empty, G2
becomes the new G1. 64b counters are used to avoid ABA issues.
This condvar doesn't yet use a requeue optimization (ie, on a broadcast,
waking just one thread and requeueing all others on the futex of the
mutex supplied by the program). I don't think doing the requeue is
necessarily the right approach (but I haven't done real measurements
yet):
* If a program expects to wake many threads at the same time and make
that scalable, a condvar isn't great anyway because of how it requires
waiters to operate mutually exclusive (due to the mutex usage). Thus, a
thundering herd problem is a scalability problem with or without the
optimization. Using something like a semaphore might be more
appropriate in such a case.
* The scalability problem is actually at the mutex side; the condvar
could help (and it tries to with the requeue optimization), but it
should be the mutex who decides how that is done, and whether it is done
at all.
* Forcing all but one waiter into the kernel-side wait queue of the
mutex prevents/avoids the use of lock elision on the mutex. Thus, it
prevents the only cure against the underlying scalability problem
inherent to condvars.
* If condvars use short critical sections (ie, hold the mutex just to
check a binary flag or such), which they should do ideally, then forcing
all those waiter to proceed serially with kernel-based hand-off (ie,
futex ops in the mutex' contended state, via the futex wait queues) will
be less efficient than just letting a scalable mutex implementation take
care of it. Our current mutex impl doesn't employ spinning at all, but
if critical sections are short, spinning can be much better.
* Doing the requeue stuff requires all waiters to always drive the mutex
into the contended state. This leads to each waiter having to call
futex_wake after lock release, even if this wouldn't be necessary.
[BZ #13165]
* nptl/pthread_cond_broadcast.c (__pthread_cond_broadcast): Rewrite to
use new algorithm.
* nptl/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise.
* nptl/pthread_cond_init.c (__pthread_cond_init): Likewise.
* nptl/pthread_cond_signal.c (__pthread_cond_signal): Likewise.
* nptl/pthread_cond_wait.c (__pthread_cond_wait): Likewise.
(__pthread_cond_timedwait): Move here from pthread_cond_timedwait.c.
(__condvar_confirm_wakeup, __condvar_cancel_waiting,
__condvar_cleanup_waiting, __condvar_dec_grefs,
__pthread_cond_wait_common): New.
(__condvar_cleanup): Remove.
* npt/pthread_condattr_getclock.c (pthread_condattr_getclock): Adapt.
* npt/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* npt/pthread_condattr_getpshared.c (pthread_condattr_getpshared):
Likewise.
* npt/pthread_condattr_init.c (pthread_condattr_init): Likewise.
* nptl/tst-cond1.c: Add comment.
* nptl/tst-cond20.c (do_test): Adapt.
* nptl/tst-cond22.c (do_test): Likewise.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_cond_t): Adapt
structure.
* sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/x86/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/nptl/internaltypes.h (COND_NWAITERS_SHIFT): Remove.
(COND_CLOCK_BITS): Adapt.
* sysdeps/nptl/pthread.h (PTHREAD_COND_INITIALIZER): Adapt.
* nptl/pthreadP.h (__PTHREAD_COND_CLOCK_MONOTONIC_MASK,
__PTHREAD_COND_SHARED_MASK): New.
* nptl/nptl-printers.py (CLOCK_IDS): Remove.
(ConditionVariablePrinter, ConditionVariableAttributesPrinter): Adapt.
* nptl/nptl_lock_constants.pysym: Adapt.
* nptl/test-cond-printers.py: Adapt.
* sysdeps/unix/sysv/linux/hppa/internaltypes.h (cond_compat_clear,
cond_compat_check_and_clear): Adapt.
* sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c: Remove file ...
* sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c
(__pthread_cond_timedwait): ... and move here.
* nptl/DESIGN-condvar.txt: Remove file.
* nptl/lowlevelcond.sym: Likewise.
* nptl/pthread_cond_timedwait.c: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: Likewise.
TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp,
ufromfpx, and float and long double variants) to convert from
floating-point to an integer type with any signedness and any given
width up to that of intmax_t, in any of the five IEEE rounding modes
(the usual four for binary floating point, plus rounding to nearest
with ties rounding away from zero), with control of whether in-range
non-integer values should result in the "inexact" exception being
raised. This patch implements these functions for glibc.
These implementations are (apart from raising exceptions) pure integer
implementations; it's entirely possible optimized versions could be
devised for some architectures. A common math/fromfp.h header
provides various common helper code that can readily be shared between
the implementations for different types. For each type, the bulk of
the implementation is also shared between the four functions, with
wrappers that define UNSIGNED and INEXACT macros appropriately before
including the main implementation.
As the functions return intmax_t and uintmax_t without math.h being
allowed to expose those typedef names, they are declared using
__intmax_t and __uintmax_t as obtained from <bits/types.h>.
The FP_INT_* rounding direction macros are defined as ascending
integers in the order the names are listed in the TS; I see no
significant value in allowing architectures to vary the values of
them.
The libm-test machinery is duly adapted to handle unsigned int
arguments, and intmax_t and uintmax_t results. Because each test
input is generally tested for four functions, five rounding modes and
several different widths, the libm-test.inc additions are very large.
Thus, the diffs in the body of this message exclude the libm-test.inc
changes, with the full patch being attached gzipped. The bulk of the
new tests were generated (expanded from a test input plus rounding
results and information about where it lies in the relevant interval
between integers, to libm-test tests for all relevant combinations of
function, rounding direction and width) by a script that's included in
the patch as math/gen-fromfp-tests.py (input data
math/gen-fromfp-tests-inputs); as an ad hoc script that's not really
expected to be rerun, it's not very polished, but it's at least
plausibly useful for adding any further tests for these functions in
future. I may split the libm-test tests up by function in future (so
both libm-test.inc and auto-libm-test-out are split into separate
files, and the tests for each function are also built and run
separately), but not for 2.25.
For no obvious reason, adding tgmath tests for the new functions
resulted in -Wuninitialized errors from test-tgmath.c about the
variable i being used uninitialized. Those errors were correct - the
variable is read by the frexp version in test-tgmath.c (where real
frexp would write through that pointer instead of reading it) - but I
don't know why this patch would result in the pre-existing issue being
newly detected. The patch initializes the variable to avoid those
errors.
With these changes, glibc 2.25 should have all the library features
from TS 18661-1 other than the functions that round result to narrower
type (and constant rounding directions, but I'm considering those
mainly a compiler feature not a library one).
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(fromfp): New declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
* math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise.
* math/math.h: Include <bits/types.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum
constant and macro.
(FP_INT_DOWNWARD): Likewise.
(FP_INT_TOWARDZERO): Likewise.
(FP_INT_TONEARESTFROMZERO): Likewise.
(FP_INT_TONEAREST): Likewise.
* math/Versions (fromfp): New libm symbol at version GLIBC_2.25.
(fromfpf): Likewise.
(fromfpl): Likewise.
(ufromfp): Likewise.
(ufromfpf): Likewise.
(ufromfpl): Likewise.
(fromfpx): Likewise.
(fromfpxf): Likewise.
(fromfpxl): Likewise.
(ufromfpx): Likewise.
(ufromfpxf): Likewise.
(ufromfpxl): Likewise.
* math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF,
s_fromfpxF and s_ufromfpxF.
* math/gen-fromfp-tests.py: New file.
* math/gen-fromfp-tests-inputs: Likewise.
* math/libm-test.inc: Include <stdint.h>
(check_intmax_t): New function.
(check_uintmax_t): Likewise.
(struct test_fiu_M_data): New type.
(struct test_fiu_U_data): Likewise.
(RUN_TEST_fiu_M): New macro.
(RUN_TEST_LOOP_fiu_M): Likewise.
(RUN_TEST_fiu_U): Likewise.
(RUN_TEST_LOOP_fiu_U): Likewise.
(fromfp_test_data): New array.
(fromfp_test): New function.
(fromfpx_test_data): New array.
(fromfpx_test): New function.
(ufromfp_test_data): New array.
(ufromfp_test): New function.
(ufromfpx_test_data): New array.
(ufromfpx_test): New function.
(main): Call fromfp_test, fromfpx_test, ufromfp_test and
ufromfpx_test.
* math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor
characters.
* math/test-tgmath-ret.c: Include <stdint.h>.
(rm): New variable.
(width): Likewise.
(CHECK_RET_CONST_TYPE): Take extra arguments and pass them to
called function.
(CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to
CHECK_RET_CONST_TYPE.
(CHECK_RET_CONST_DOUBLE): Likewise.
(CHECK_RET_CONST_LDOUBLE): Likewise.
(CHECK_RET_CONST): Take extra arguments and pass them to calls
macros.
(fromfp): New CHECK_RET_CONST call.
(ufromfp): Likewise.
(fromfpx): Likewise.
(ufromfpx): Likewise.
(do_test): Call check_return_fromfp, check_return_ufromfp,
check_return_fromfpx and check_return_ufromfpx.
* math/test-tgmath.c: Include <stdint.h>
(NCALLS): Increase to 138.
(F(compile_test)): Initialize i. Call fromfp functions.
(F(fromfp)): New function.
(F(fromfpx)): Likewise.
(F(ufromfp)): Likewise.
(F(ufromfpx)): Likewise.
* manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD,
FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO,
FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf,
ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and
ufromfpxl.
* manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx,
ufromfp and ufromfpx.
* math/fromfp.h: New file.
* sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise.
* sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise.
* sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise.
* sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise.
* sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise.
* sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp,
ufromfp, fromfpx and ufromfpx.
(CFLAGS-nldbl-fromfp.c): New variable.
(CFLAGS-nldbl-fromfpx.c): Likewise.
(CFLAGS-nldbl-ufromfp.c): Likewise.
(CFLAGS-nldbl-ufromfpx.c): Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>.
* sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
this patch add a direct call to shmget syscall if it is supported by
kernel features.
Checked on x86_64, i686, powerpc64le, aarch64, and armhf.
* sysdeps/unix/sysv/linux/alpha/syscalls.list (shmget): Remove.
* sysdeps/unix/sysv/linux/arm/syscalls.list (shmget): Likewise.
* sysdeps/unix/sysv/linux/generic/syscalls.list (shmget): Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list (shmget): Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list (shmget): Likewise.
* sysdeps/unix/sysv/linux/microblaze/syscalls.list (shmget): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (shmget):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (shmget):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list (shmget): Likewise.
* sysdeps/unix/sysv/linux/shmget.c (shmget): Use shmget syscall if it
is defined.
this patch add a direct call to shmdt syscall if it is supported by
kernel features.
hecked on x86_64, i686, powerpc64le, aarch64, and armhf.
* sysdeps/unix/sysv/linux/alpha/syscalls.list (shmdt): Remove.
* sysdeps/unix/sysv/linux/arm/syscalls.list (shmdt): Likewise.
* sysdeps/unix/sysv/linux/generic/syscalls.list (shmdt): Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list (shmdt): Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list (shmdt): Likewise.
* sysdeps/unix/sysv/linux/microblaze/syscalls.list (shmdt): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (shmdt):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (shmdt):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list (shmdt): Likewise.
* sysdeps/unix/sysv/linux/shmdt.c (shmdt): Use shmdt syscall if it is
defined.
This patch consolidates the shmctl Linux implementation in only
one default file, sysdeps/unix/sysv/linux/shmctl.c. If tries to use
the direct syscall if it is supported, otherwise will use the old ipc
multiplex mechanism.
The patch also simplify header inclusion and reorganize internal
compat symbol to be built only if old ipc is defined.
Checked on x86_64, i686, powerpc64le, aarch64, and armhf.
* sysdeps/unix/sysv/linux/alpha/Makefile (sysdeps_routines): Remove
oldshmctl.
* sysdeps/unix/sysv/linux/alpha/syscalls.list (shmctl): Remove.
* sysdeps/unix/sysv/linux/arm/syscalls.list (shmctl): Likewise.
* sysdeps/unix/sysv/linux/generic/syscalls.list (shmctl): Likewise.
* sysdeps/unix/sysv/linux/hppa/syscalls.list (shmctl): Likewise.
* sysdeps/unix/sysv/linux/ia64/syscalls.list (shmctl): Likewise.
* sysdeps/unix/sysv/linux/microblaze/syscalls.list (shmctl): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/syscalls.list (shmctl):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list (shmctl):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/syscalls.list (shmctl): Likewise.
* sysdeps/unix/sysv/linux/alpha/shmctl.c: Remove file.
* sysdeps/unix/sysv/linux/arm/shmctl.c: Likewise.
* sysdeps/unix/sysv/linux/microblaze/shmctl.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/shmctl.c: Use default
implementation.
* sysdeps/unix/sysv/linux/shmctl.c (__new_shmctl): Use shmctl syscall
if it is defined.
