This patch filters out the internal NPTL signals (SIGCANCEL/SIGTIMER and
SIGSETXID) from signal functions. GLIBC on Linux requires both signals to
proper implement pthread cancellation, posix timers, and set*id posix
thread synchronization.
And not filtering out the internal signal is troublesome:
- A conformant program on a architecture that does not filter out the
signals might inadvertently disable pthread asynchronous cancellation,
set*id synchronization or posix timers.
- It might also to security issues if SIGSETXID is masked and set*id
functions are called (some threads might have effective user or group
id different from the rest).
The changes are basically:
- Change __is_internal_signal to bool and used on all signal function
that has a signal number as input. Also for signal function which accepts
signals sets (sigset_t) it assumes that canonical function were used to
add/remove signals which lead to some input simplification.
- Fix tst-sigset.c to avoid check for SIGCANCEL/SIGTIMER and SIGSETXID.
It is rewritten to check each signal indidually and to check realtime
signals using canonical macros.
- Add generic __clear_internal_signals and __is_internal_signal
version since both symbols are used on generic implementations.
- Remove superflous sysdeps/nptl/sigfillset.c.
- Remove superflous SIGTIMER handling on Linux __is_internal_signal
since it is the same of SIGCANCEL.
- Remove dangling define and obvious comment on nptl/sigaction.c.
Checked on x86_64-linux-gnu.
[BZ #22391]
* nptl/sigaction.c (__sigaction): Use __is_internal_signal to
check for internal nptl signals.
* nptl/sigaction.c (__sigaction): Likewise.
* signal/sigaddset.c (sigaddset): Likewise.
* signal/sigdelset.c (sigdelset): Likewise.
* sysdeps/posix/signal.c (__bsd_signal): Likewise.
* sysdeps/posix/sigset.c (sigset): Call and check sigaddset return
value.
* signal/sigfillset.c (sigfillset): User __clear_internal_signals
to filter out internal nptl signals.
* signal/tst-sigset.c (do_test): Check ech signal indidually and
also check realtime signals using standard macros.
* sysdeps/generic/internal-signals.h (__clear_internal_signals,
__is_internal_signal, __libc_signal_block_all,
__libc_signal_block_app, __libc_signal_restore_set): New functions.
* sysdeps/nptl/sigfillset.c: Remove file.
* sysdeps/unix/sysv/linux/internal-signals.h (__is_internal_signal):
Change return to bool.
(__clear_internal_signals): Remove SIGTIMER clean since it is
equal to SIGCANEL on Linux.
* sysdeps/unix/sysv/linux/sigtimedwait.c (__sigtimedwait): Assume
signal set was constructed using standard functions.
Reported-by: Yury Norov <ynorov@caviumnetworks.com>
Now that send might be implemented calling sendto syscall on Linux,
I am seeing some issue in some kernel configurations where tst-cancel4
sendto do not block as expected.
The socket used to force the syscall blocking is used with default
system configuration for buffer sending size, which might not be
suffice to force blocking. This patch fixes it by explicit setting
buffer socket lower than the buffer size used. It also enables sendto
cancellation tests to work in both ways (since internally send is
implemented routing to sendto on Linux kernel).
The patch also removes unrequired make rules on some archictures
for send/recv. The generic nptl Makefile already set the compiler flags
required on some architectures for correct unwinding and libc object
are not strictly required to support unwind (since pthread_cancel
requires linking against libpthread).
Checked on aarch64-linux-gnu and x86_64-linux-gnu. I also did a
sniff test with tst-cancel{4,5} on a simulated mips64-linux-gnu.
* nptl/tst-cancel4-common.h (set_socket_buffer): New function.
* nptl/tst-cancel4-common.c (do_test): Call set_socket_buffer
for socketpair endpoint.
* nptl/tst-cancel4.c (tf_send): Call set_socket_buffer and use
WRITE_BUFFER_SIZE as buffer size for sending socket.
(tf_sendto): Use SOCK_STREAM instead of SOCK_DGRAM and fix an
issue on system where send is implemented with sendto syscall.
* sysdeps/unix/sysv/linux/mips/mips64/Makefile [$(subdir) = socket]
(CFLAGS-recv.c, CFLAGS-send.c): Remove rules.
[$(subdir) = nptl] (CFLAGS-recv.c, CFLAGS-send.c): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/Makefile: Remove file.
libpthread_nonshared.a is unused after this, so remove it from the
build.
There is no ABI impact because pthread_atfork was implemented using
__register_atfork in libc even before this change.
pthread_atfork has to be a weak alias because pthread_* names are not
reserved in libc.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Current implementation (sysdeps/nptl/fork.c) replicates the atfork
handlers list backward to invoke the child handlers after fork/clone
syscall.
The internal atfork handlers is implemented as a single-linked list
so a lock-free algorithm can be used, trading fork mulithread call
performance for some code complexity and dynamic stack allocation
(since the backwards list should not fail).
This patch refactor it to use a dynarary instead of a linked list.
It simplifies the external variables need to be exported and also
the internal atfork handler member definition.
The downside is a serialization of fork call in multithread, since to
operate on the dynarray the internal lock should be used. However
as noted by Florian, it already acquires external locks for malloc
and libio so it is already hitting some lock contention. Besides,
posix_spawn should be faster and more scalable to run external programs
in multithread environments.
Checked on x86_64-linux-gnu.
* nptl/Makefile (routines): Remove unregister-atfork.
* nptl/register-atfork.c (fork_handler_pool): Remove variable.
(fork_handler_alloc): Remove function.
(fork_handlers, fork_handler_init): New variables.
(__fork_lock): Rename to atfork_lock.
(__register_atfork, __unregister_atfork, libc_freeres_fn): Rewrite
to use a dynamic array to add/remove atfork handlers.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* sysdeps/nptl/fork.h (__fork_lock, __fork_handlers, __linkin_atfork):
Remove declaration.
(fork_handler): Remove next, refcntr, and need_signal member.
(__run_fork_handler_type): New enum.
(__run_fork_handlers): New prototype.
* sysdeps/nptl/libc-lockP.h (__libc_atfork): Remove declaration.
This patch renames the nptl-signals.h header to internal-signals.h.
On Linux the definitions and functions are not only NPTL related, but
used for other POSIX definitions as well (for instance SIGTIMER for
posix times, SIGSETXID for id functions, and signal block/restore
helpers) and since generic functions will be places and used in generic
implementation it makes more sense to decouple it from NPTL.
Checked on x86_64-linux-gnu.
* sysdeps/nptl/nptl-signals.h: Move to ...
* sysdeps/generic/internal-signals.h: ... here. Adjust internal
comments.
* sysdeps/unix/sysv/linux/internal-signals.h: Add include guards.
(__nptl_is_internal_signal): Rename to __is_internal_signal.
(__nptl_clear_internal_signals): Rename to __clear_internal_signals.
* sysdeps/unix/sysv/linux/raise.c: Adjust nptl-signal.h to
include-signals.h rename.
* nptl/pthreadP.h: Likewise.
* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Call
__is_internal_signal instead of __nptl_is_internal_signal.
An elided mutex don't fail destroy. Elision was disabled for the
test nptl/tst-mutex8 in nptl/Makefile. Thus we can run tests which
destroy a locked mutex.
As elision is only disabled for tst-mutex8, the variants
tst-mutex8-static, tst-mutexpi8 and tst-mutexpi8-static are still
failing if lock elision is enabled.
This patch adds a runtime check, if the checked type of mutex will
be elided. This check is using TUNABLE_GET_FULL to determine if
elision is enabled via the tunables framework.
The pthread_mutex_destroy tests are only run if we dont't assume an
elided mutex.
This way, we can run the whole glibc testsuite with or without enabled
lock elision.
ChangeLog:
* nptl/Makefile (tst-mutex8-ENV): Delete.
* nptl/tst-mutex8.c (check_type):
Add runtime check if mutex will be elided.
In commit cba595c350 and commit
f81ddabffd, ABI compatibility with
applications was broken by increasing the size of the on-stack
allocated __pthread_unwind_buf_t beyond the oringal size.
Applications only have the origianl space available for
__pthread_unwind_register, and __pthread_unwind_next to use,
any increase in the size of __pthread_unwind_buf_t causes these
functions to write beyond the original structure into other
on-stack variables leading to segmentation faults in common
applications like vlc. The only workaround is to version those
functions which operate on the old sized objects, but this must
happen in glibc 2.28.
Thank you to Andrew Senkevich, H.J. Lu, and Aurelien Jarno, for
submitting reports and tracking the issue down.
The commit reverts the above mentioned commits and testing on
x86_64 shows that the ABI compatibility is restored. A tst-cleanup1
regression test linked with an older glibc now passes when run
with the newly built glibc. Previously a tst-cleanup1 linked with
an older glibc would segfault when run with an affected glibc build.
Tested on x86_64 with no regressions.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
I verified that without the guard accounting change in commit
630f4cc3aa (Fix stack guard size
accounting) and RTLD_NOW for libgcc_s introduced by commit
f993b87540 (nptl: Open libgcc.so with
RTLD_NOW during pthread_cancel), the tst-minstack-cancel test fails on
an AVX-512F machine. tst-minstack-exit still passes, and either of
the mentioned commit by itself frees sufficient stack space to make
tst-minstack-cancel pass, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Previously if user requested S stack and G guard when creating a
thread, the total mapping was S and the actual available stack was
S - G - static_tls, which is not what the user requested.
This patch fixes the guard size accounting by pretending the user
requested S+G stack. This way all later logic works out except
when reporting the user requested stack size (pthread_getattr_np)
or when computing the minimal stack size (__pthread_get_minstack).
Normally this will increase thread stack allocations by one page.
TLS accounting is not affected, that will require a separate fix.
[BZ #22637]
* nptl/descr.h (stackblock, stackblock_size): Update comments.
* nptl/allocatestack.c (allocate_stack): Add guardsize to stacksize.
* nptl/nptl-init.c (__pthread_get_minstack): Remove guardsize from
stacksize.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise.
GCC PR 83641 results in a miscompilation of libpthread, which
causes pthread_exit not to restore callee-saved registers before
running destructors for objects on the stack. This test detects
this situation:
info: unsigned int, direct pthread_exit call
tst-thread-exit-clobber.cc:80: numeric comparison failure
left: 4148288912 (0xf741dd90); from: value
right: 1600833940 (0x5f6ac994); from: magic_values.v2
info: double, direct pthread_exit call
info: unsigned int, indirect pthread_exit call
info: double, indirect pthread_exit call
error: 1 test failures
`make check' sometimes triggers a rebuild of librt.so using
nptl/Makefile, which ignores librt's dependence on libpthread. This
causes the build to blow up when we attempt to run the test suite on
RISC-V.
2018-01-06 Palmer Dabbelt <palmer@sifive.com>
* nptl/Makefile (/librt.so): Always depend on
"$(shared-thread-library)".
This patch consolidates the pthread_join and gnu extensions to avoid
code duplication. The function pthread_join, pthread_tryjoin_np, and
pthread_timedjoin_np are now based on pthread_timedjoin_ex.
It also fixes some inconsistencies on ESRCH, EINVAL, EDEADLK handling
(where each implementation differs from each other) and also on
clenup handler (which now always use a CAS).
Checked on i686-linux-gnu and x86_64-linux-gnu.
* nptl/pthreadP.h (__pthread_timedjoin_np): Define.
* nptl/pthread_join.c (pthread_join): Use __pthread_timedjoin_np.
* nptl/pthread_tryjoin.c (pthread_tryjoin): Likewise.
* nptl/pthread_timedjoin.c (cleanup): Use CAS on argument setting.
(pthread_timedjoin_np): Define internal symbol and common code from
pthread_join.
* sysdeps/unix/sysv/linux/i386/lowlevellock.h (__lll_timedwait_tid):
Remove superflous checks.
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h (__lll_timedwait_tid):
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
All binaries use TLS and thus need a properly set up TCB, so we can
simply return its address directly, instead of forwarding to the
libpthread implementation from libc.
For versioned symbols, the dynamic linker checks that the soname matches
the name supplied by the link editor, so a compatibility symbol in
libpthread is needed.
To avoid linking against the libpthread function in all cases, we would
have to bump the symbol version of libpthread in libc.so and supply a
compat symbol. This commit does not do that because the function
implementation is so small, so the overhead by two active copies of the
same function might well be smaller than the increase in symbol table
size.
On x86, padding in struct __jmp_buf_tag is used for shadow stack pointer
to support shadow stack in Intel Control-flow Enforcemen Technology.
Since the cancel_jmp_buf array is passed to setjmp and longjmp by
casting it to pointer to struct __jmp_buf_tag, it should be as large
as struct __jmp_buf_tag. Otherwise when shadow stack is enabled,
setjmp and longjmp will write and read beyond cancel_jmp_buf when saving
and restoring shadow stack pointer.
This patch adds bits/types/__cancel_jmp_buf_tag.h to define struct
__cancel_jmp_buf_tag so that Linux/x86 can add saved_mask to
cancel_jmp_buf.
Tested natively on i386, x86_64 and x32. Tested hppa-linux-gnu with
build-many-glibcs.py.
[BZ #22563]
* bits/types/__cancel_jmp_buf_tag.h: New file.
* sysdeps/unix/sysv/linux/x86/bits/types/__cancel_jmp_buf_tag.h
* sysdeps/unix/sysv/linux/x86/pthreaddef.h: Likewise.
* sysdeps/unix/sysv/linux/x86/nptl/pthreadP.h: Likewise.
* nptl/Makefile (headers): Add
bits/types/__cancel_jmp_buf_tag.h.
* nptl/descr.h [NEED_SAVED_MASK_IN_CANCEL_JMP_BUF]
(pthread_unwind_buf): Add saved_mask to cancel_jmp_buf.
* sysdeps/nptl/pthread.h: Include
<bits/types/__cancel_jmp_buf_tag.h>.
(__pthread_unwind_buf_t): Use struct __cancel_jmp_buf_tag with
__cancel_jmp_buf.
* sysdeps/unix/sysv/linux/hppa/pthread.h: Likewise.
nptl/tst-attr3 fails to build with GCC mainline because of
(deliberate) aliasing between the second (attributes) and fourth
(argument to thread start routine) arguments to pthread_create.
Although both those arguments are restrict-qualified in POSIX,
pthread_create does not actually dereference its fourth argument; it's
an opaque pointer passed to the thread start routine. Thus, the
aliasing is actually valid in this case, and it's deliberate in the
test. So this patch makes the test disable -Wrestrict for the two
pthread_create calls in question. (-Wrestrict was added in GCC 7,
hence the __GNUC_PREREQ conditions, but the particular warning in
question is new in GCC 8.)
Tested compilation with build-many-glibcs.py for aarch64-linux-gnu.
* nptl/tst-attr3.c: Include <libc-diag.h>.
(do_test) [__GNUC_PREREQ (7, 0)]: Ignore -Wrestrict for two tests.
This patch adds several new tunables to control the behavior of
elision on supported platforms[1]. Since elision now depends
on tunables, we should always *compile* with elision enabled,
and leave the code disabled, but available for runtime
selection. This gives us *much* better compile-time testing of
the existing code to avoid bit-rot[2].
Tested on ppc, ppc64, ppc64le, s390x and x86_64.
[1] This part of the patch was initially proposed by
Paul Murphy but was "staled" because the framework have changed
since the patch was originally proposed:
https://patchwork.sourceware.org/patch/10342/
[2] This part of the patch was inititally proposed as a RFC by
Carlos O'Donnell. Make sense to me integrate this on the patch:
https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html
* elf/dl-tunables.list: Add elision parameters.
* manual/tunables.texi: Add entries about elision tunable.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c:
Add callback functions to dynamically enable/disable elision.
Add multiple callbacks functions to set elision parameters.
Deleted __libc_enable_secure check.
* sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise.
* configure: Regenerated.
* configure.ac: Option enable_lock_elision was deleted.
* config.h.in: ENABLE_LOCK_ELISION flag was deleted.
* config.make.in: Remove references to enable_lock_elision.
* manual/install.texi: Elision configure option was removed.
* INSTALL: Regenerated to remove enable_lock_elision.
* nptl/Makefile:
Disable elision so it can verify error case for destroying a mutex.
* sysdeps/powerpc/nptl/elide.h:
Cleanup ENABLE_LOCK_ELISION check.
Deleted macros for the case when ENABLE_LOCK_ELISION was not defined.
* sysdeps/s390/configure: Regenerated.
* sysdeps/s390/configure.ac: Remove references to enable_lock_elision..
* nptl/tst-mutex8.c:
Deleted all #ifndef ENABLE_LOCK_ELISION from the test.
* sysdeps/powerpc/powerpc32/sysdep.h:
Deleted all ENABLE_LOCK_ELISION checks.
* sysdeps/powerpc/powerpc64/sysdep.h: Likewise.
* sysdeps/powerpc/sysdep.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise.
* sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/s390/Makefile: Remove references to
enable-lock-elision.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
GCC 4.9 (the minimum current supported) emits an warning for universal
zero initializer ({0}) on ASSERT_PTHREAD_INTERNAL_SIZE:
pthread_attr_init.c: In function ‘__pthread_attr_init_2_1’:
pthread_attr_init.c:37:3: error: missing braces around initializer [-Werror=missing-braces]
ASSERT_PTHREAD_INTERNAL_SIZE (pthread_attr_t, struct pthread_attr);
^
pthread_attr_init.c:37:3: error: (near initialization for ‘(anonymous).__size’) [-Werror=missing-braces]
It is fact GCC BZ#53119 [1] fixed in later version (GCC5+). Since
current branch is closed and there is no indication it will be backports
(comment #20 in same bug report) this patch fixes by using a double
bracket to zero initialize the struct.
Checked on x86_64-linux-gnu with GCC 7 and GCC 4.9.
* nptl/pthreadP.h (ASSERT_PTHREAD_INTERNAL_SIZE): Add workarond for
-Wmissing-braces on GCC 4.9.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Update all sourceware links to https. The website redirects
everything to https anyway so let the web server do a bit less work.
The only reference that remains unchanged is the one in the old
ChangeLog, since it didn't seem worth changing it.
* NEWS: Update sourceware link to https.
* configure.ac: Likewise.
* crypt/md5test-giant.c: Likewise.
* dlfcn/bug-atexit1.c: Likewise.
* dlfcn/bug-atexit2.c: Likewise.
* localedata/README: Likewise.
* malloc/tst-mallocfork.c: Likewise.
* manual/install.texi: Likewise.
* nptl/tst-pthread-getattr.c: Likewise.
* stdio-common/tst-fgets.c: Likewise.
* stdio-common/tst-fwrite.c: Likewise.
* sunrpc/Makefile: Likewise.
* sysdeps/arm/armv7/multiarch/memcpy_impl.S: Likewise.
* wcsmbs/tst-mbrtowc2.c: Likewise.
* configure: Regenerate.
* INSTALL: Regenerate.
This patch adds two new internal defines to set the internal
pthread_mutex_t layout required by the supported ABIS:
1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define
__nusers fields before or after __kind. The preferred value for
is 0 for new ports and it sets __nusers before __kind.
2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and
__list members will be place inside an union for linuxthreads
compatibility. The preferred value is 0 for ports and it sets
to not use an union to define both fields.
It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32.
Checked with a make check run-built-tests=no on all afected ABIs.
[BZ #22298]
* nptl/allocatestack.c (allocate_stack): Check if
__PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if
__PTHREAD_MUTEX_HAVE_PREV is defined.
* nptl/descr.h (pthread): Likewise.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal):
Likewise.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise.
* sysdeps/nptl/bits/thread-shared-types.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
(__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead
of __WORDSIZE for internal layout.
(__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead
of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION
instead of __WORDSIZE whether to use an union for __spins and __list
fields.
(__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION
case.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds a new build test to check for internal fields
offsets for user visible internal field. Although currently
the only field which is statically initialized to a non zero value
is pthread_mutex_t.__data.__kind value, the tests also check the
offset of __kind, __spins, __elision (if supported), and __list
internal member. A internal header (pthread-offset.h) is added
to each major ABI with the reference value.
Checked on x86_64-linux-gnu and with a build check for all affected
ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu,
mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu,
s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu,
sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32,
tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32).
* nptl/pthreadP.h (ASSERT_PTHREAD_STRING,
ASSERT_PTHREAD_INTERNAL_OFFSET): New macro.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time
checks for internal pthread_mutex_t offsets.
* sysdeps/aarch64/nptl/pthread-offsets.h
(__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET,
__PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET,
__PTHREAD_MUTEX_LIST_OFFSET): New macro.
* sysdeps/alpha/nptl/pthread-offsets.h: Likewise.
* sysdeps/arm/nptl/pthread-offsets.h: Likewise.
* sysdeps/hppa/nptl/pthread-offsets.h: Likewise.
* sysdeps/i386/nptl/pthread-offsets.h: Likewise.
* sysdeps/ia64/nptl/pthread-offsets.h: Likewise.
* sysdeps/m68k/nptl/pthread-offsets.h: Likewise.
* sysdeps/microblaze/nptl/pthread-offsets.h: Likewise.
* sysdeps/mips/nptl/pthread-offsets.h: Likewise.
* sysdeps/nios2/nptl/pthread-offsets.h: Likewise.
* sysdeps/powerpc/nptl/pthread-offsets.h: Likewise.
* sysdeps/s390/nptl/pthread-offsets.h: Likewise.
* sysdeps/sh/nptl/pthread-offsets.h: Likewise.
* sysdeps/sparc/nptl/pthread-offsets.h: Likewise.
* sysdeps/tile/nptl/pthread-offsets.h: Likewise.
* sysdeps/x86_64/nptl/pthread-offsets.h: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Various subdirectories of glibc include Banner files to put some text
in the output of executing libc.so.6, under "Available extensions".
Some of those subdirectories (e.g. crypt) may originally have been
add-ons (and so optional, so a particular glibc build might or might
not have included them), but except for libidn they aren't now (or if
only included in some builds, in the case of soft-fp, the inclusion
depends on the architecture for which glibc is configured rather than
having any glibc configuration for which it's an optional feature),
and it doesn't seem useful for the libc.so.6 output to call out a few
features like that.
This patch removes the non-add-on Banner files, updating contrib.texi
where they noted contributions not otherwise mentioned there.
Tested for x86_64.
* crypt/Banner: Remove file.
* nptl/Banner: Likewise.
* resolv/Banner: Likewise.
* soft-fp/Banner: Likewise.
* nptl/Makefile ($(objpfx)banner.h): Remove rule.
($(objpfx)version.d): Remove dependency on banner.h.
($(objpfx)version.os): Likewise.
* nptl/version.c (banner): Do not include banner.h.
* manual/contrib.texi: Update entries for Richard Henderson, Jakub
Jelinek and BIND code.
On very large multi-processor systems, creating hundreds of threads
runs into a test time out. The tests do not seem to benefit from
massive over-scheduling.
This patch fixes ia64 failures on thread exit by madvise the required
area taking in consideration its disjoing stacks
(NEED_SEPARATE_REGISTER_STACK). Also the snippet that setup the
madvise call to advertise kernel the area won't be used anymore in
near future is reallocated in allocatestack.c (for consistency to
put all stack management function in one place).
Checked on x86_64-linux-gnu and i686-linux-gnu for sanity (since
it is not expected code changes for architecture that do not
define NEED_SEPARATE_REGISTER_STACK) and also got a report that
it fixes ia64-linux-gnu failures from Sergei Trofimovich
<slyfox@gentoo.org>.
[BZ #21672]
* nptl/allocatestack.c [_STACK_GROWS_DOWN] (setup_stack_prot):
Set to use !NEED_SEPARATE_REGISTER_STACK as well.
(advise_stack_range): New function.
* nptl/pthread_create.c (START_THREAD_DEFN): Move logic to mark
stack non required to advise_stack_range at allocatestack.c
This patch consolidates all the non cancellable nanosleep calls to use
the __nanosleep_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock): Replace
nanosleep_not_cancel with __nanosleep_nocancel.
* sysdeps/generic/not-cancel.h (nanosleep_not_cancel): Remove macro.
(__nanosleep_nocancel): New macro.
* sysdeps/unix/sysv/linux/nanosleep.c (__nanosleep_nocancel): New
function.
* sysdeps/unix/sysv/linux/not-cancel.h (nanosleep_not_cancel): Remove
macro.
(__nanosleep_nocancel): New prototype.
This patch consolidates all the non cancellable pause calls to use
the __pause_nocancel identifier. For non cancellable targets it will
be just a macro to call the default respective symbol while on Linux
will be a internal one.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock_full): Replace
pause_not_cancel with __pause_nocancel.
* sysdeps/generic/not-cancel.h (pause_not_cancel): Remove macro.
(__pause_nocancel): New macro.
* sysdeps/unix/sysv/linux/not-cancel.h (pause_not_cancel): Remove
macro.
(__pause_nocancel): New prototype.
* sysdeps/unix/sysv/linux/pause.c (__pause_nocancel): New function.
Unlike the vfork forwarder and like the fork forwarder as in bug 19861,
there won't be a problem when the compiler does not turn this into a tail
call.
65810f0ef0 fixed a robust mutex bug but
introduced BZ 21778: if the CAS used to try to acquire a lock fails, the
expected value is not updated, which breaks other cases in the loce
acquisition loop. The fix is to simply update the expected value with
the value returned by the CAS, which ensures that behavior is as if the
first case with the CAS never happened (if the CAS fails).
This is a regression introduced in the last release.
Tested on x86_64, i686, ppc64, ppc64le, s390x, aarch64, armv7hl.
Without this fix, the rwlock can fail to execute the explicit hand-over
in certain cases (e.g., empty critical sections that switch quickly between
read and write phases). This can then lead to errors in how __wrphase_futex
is accessed, which in turn can lead to deadlocks.
Single thread optimization is valid if at thread creation time the
optimization can be disabled. This is in principle true for all
stream objects that user code can access (and thus needs locking),
using the same internal list as fflush(0) uses. However in glibc
open_memstream is not on that list (BZ 21735) so the optimization
has to be disabled.
* libio/memstream.c (__open_memstream): Set _IO_FLAGS2_NEED_LOCK.
* libio/wmemstream.c (open_wmemstream): Likewise.
* nptl/tst-memstream.c: New.
This patch increases the timeouts for some tests that I've seen timing
out on slow systems in my 2.26 release testing. (In the case of
tst-tsearch.c, increasing the timeout means removing a setting of 10
that was put there before the default timeout was increased to 20
seconds, so putting the default into effect.)
* iconvdata/tst-loading.c (TIMEOUT): Define to 30.
* misc/tst-tsearch.c (TIMEOUT): Remove.
* nptl/tst-create-detached.c (TIMEOUT): Define to 100.
* nptl/tst-robust-fork.c (TIMEOUT): Likewise.
* nptl/tst-rwlock19.c (TIMEOUT): Likewise.
* string/tst-cmp.c (TIMEOUT): Define to 600.
Locking overhead can be significant in some stdio operations
that are common in single threaded applications.
This patch adds the _IO_FLAGS2_NEED_LOCK flag to indicate if
an _IO_FILE object needs to be locked and some of the stdio
functions just jump to their _unlocked variant when not. The
flag is set on all _IO_FILE objects when the first thread is
created. A new GLIBC_PRIVATE libc symbol, _IO_enable_locks,
was added to do this from libpthread.
The optimization can be applied to more stdio functions,
currently it is only applied to single flag check or single
non-wide-char standard operations. The flag should probably
be never set for files with _IO_USER_LOCK, but that's just a
further optimization, not a correctness requirement.
The optimization is valid in a single thread because stdio
operations are non-as-safe (so lock state is not observable
from a signal handler) and stdio locks are recursive (so lock
state is not observable via deadlock). The optimization is not
valid if a thread may be created while an stdio lock is taken
and thus it should be disabled if any user code may run during
an stdio operation (interposed malloc, printf hooks, etc).
This makes the optimization more complicated for some stdio
operations (e.g. printf), but those are bigger and thus less
important to optimize so this patch does not try to do that.
* libio/libio.h (_IO_FLAGS2_NEED_LOCK, _IO_need_lock): Define.
* libio/libioP.h (_IO_enable_locks): Declare.
* libio/Versions (_IO_enable_locks): New symbol.
* libio/genops.c (_IO_enable_locks): Define.
(_IO_old_init): Initialize flags2.
* libio/feof.c.c (_IO_feof): Avoid locking when not needed.
* libio/ferror.c (_IO_ferror): Likewise.
* libio/fputc.c (fputc): Likewise.
* libio/putc.c (_IO_putc): Likewise.
* libio/getc.c (_IO_getc): Likewise.
* libio/getchar.c (getchar): Likewise.
* libio/ioungetc.c (_IO_ungetc): Likewise.
* nptl/pthread_create.c (__pthread_create_2_1): Enable stdio locks.
* libio/iofopncook.c (_IO_fopencookie): Enable locking for the file.
* sysdeps/pthread/flockfile.c (__flockfile): Likewise.
