This patch updates syscall-names.list for Linux 5.3, adding two new
syscalls.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 5.3.
(clone3): New syscall.
(pidfd_open): Likewise.
This patch makes build-many-glibcs.py use Linux 5.3.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
* scripts/build-many-glibcs.py (Context.checkout): Default Linux
version to 5.3.
This patch adds support for HP_TIMING_NOW if we build at least
with -march=z10 -mzarch. Otherwise we are still using the
generic hp-timing.h.
ChangeLog:
* sysdeps/s390/hp-timing.h: New file.
Building glibc for RISC-V with Linux 5.3 kernel headers fails because
<linux/sched.h>, included in vfork.S for CLONE_* constants, contains a
structure definition not safe for inclusion in assembly code.
All other architectures already avoid use of that header in vfork.S,
either defining the CLONE_* constants locally or embedding the
required values directly in the relevant instruction, where they
implement vfork using the clone syscall (see the implementations for
aarch64, ia64, mips and nios2). This patch makes the RISC-V version
define the constants locally like the other architectures.
Tested build for all three RISC-V configurations in
build-many-glibcs.py with Linux 5.3 headers.
* sysdeps/unix/sysv/linux/riscv/vfork.S: Do not include
<linux/sched.h>.
(CLONE_VM): New macro.
(CLONE_VFORK): Likewise.
The testcase forks a child process and runs pldd with PID of
this child. On systems where /proc/sys/kernel/yama/ptrace_scope
differs from zero, pldd will fail with
/usr/bin/pldd: cannot attach to process 3: Operation not permitted
This patch checks if ptrace_scope exists, is zero "classic ptrace permissions"
or one "restricted ptrace". If ptrace_scope exists and has a higher
restriction, then the test is marked as UNSUPPORTED.
The case "restricted ptrace" is handled by rearranging the processes involved
during the test. Now we have the following process tree:
-parent: do_test (performs output checks)
--subprocess 1: pldd_process (becomes pldd via execve)
---subprocess 2: target_process (ptraced via pldd)
ChangeLog:
* elf/tst-pldd.c (do_test): Add UNSUPPORTED check.
Rearrange subprocesses.
(pldd_process): New function.
* support/Makefile (libsupport-routines): Add support_ptrace.
* support/xptrace.h: New file.
* support/support_ptrace.c: Likewise.
There is no need to sparc64 provide an arch-specific implementation to
route to POSIX one (which uses gettimeofday). Linux one already handles
the case for architecture that does not have __NR_time.
No semantic changes, checked against a build for sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/sparc/sparc64/time.c: Remove file.
This patch consolidates the mips, mips64, and mips64-n32
INTERNAL_VSYSCALL_CALL on a single implementation.
No semantic changes. I checked against a build for mips-linux-gnu,
mips64-linux-gnu, and mips64-n32-linux-gnu.
* sysdeps/unix/sysv/linux/mips/mips32/sysdep.h
(INTERNAL_VSYSCALL_CALL): Remove.
* sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h
(INTERNAL_VSYSCALL_CALL): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h
(INTERNAL_VSYSCALL_CALL): Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep.h (INTERNAL_VSYSCALL_CALL):
New macro.
This patch simplifies the powerpc internal macros for vDSO calls
by:
- Removing INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK, used solely on
get_timebase_freq.
- Adjust INTERNAL_VSYSCALL_CALL_TYPE powerpc32 to follow powerpc64
argument ordering.
- Use HAVE_*_VSYSCALL instead of explicit strings.
- Make powerpc libc-vdso.h include generic implementation.
No semantic change expected, checked on powerpc-linux-gnu-power4,
powerpc64-linux-gnu, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/libc-vdso.h (VDSO_IFUNC_RET): Define if not
defined.
* sysdeps/unix/sysv/linux/powerpc/get_timebase_freq.c
(__get_timebase_freq): Remove use of
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK.
(get_timebase_freq_fallback): New symbol.
* sysdeps/unix/sysv/linux/powerpc/gettimeofday.c (time): Use
HAVE_GETTIMEOFDAY_VSYSCALL.
* sysdeps/unix/sysv/linux/powerpc/time.c (gettimeofday): Use
HAVE_TIME_VSYSCALL.
* sysdeps/unix/sysv/linux/powerpc/libc-vdso.h: Include generic
implementation.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h
(INTERNAL_VSYSCALL_CALL_TYPE): Make calling convention similar to
powerpc64.
(INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK): Remove macro.
* .../sysv/linux/powerpc/powerpc64/sysdep.h
(INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sysdep.h
(HAVE_GETTIMEOFDAY_VSYSCALL): Define.
Linux vDSO initialization code the internal function pointers require a
lot of duplicated boilerplate over different architectures. This patch
aims to simplify not only the code but the required definition to enable
a vDSO symbol.
The changes are:
1. Consolidate all init-first.c on only one implementation and enable
the symbol based on HAVE_*_VSYSCALL existence.
2. Set the HAVE_*_VSYSCALL to the architecture expected names string.
3. Add a new internal implementation, get_vdso_mangle_symbol, which
returns a mangled function pointer.
Currently the clock_gettime, clock_getres, gettimeofday, getcpu, and time
are handled in an arch-independent way, powerpc still uses some
arch-specific vDSO symbol handled in a specific init-first implementation.
Checked on aarch64-linux-gnu, arm-linux-gnueabihf, i386-linux-gnu,
mips64-linux-gnu, powerpc64le-linux-gnu, s390x-linux-gnu,
sparc64-linux-gnu, and x86_64-linux-gnu.
* sysdeps/powerpc/powerpc32/backtrace.c (is_sigtramp_address,
is_sigtramp_address_rt): Use HAVE_SIGTRAMP_{RT}32 instead of SHARED.
* sysdeps/powerpc/powerpc64/backtrace.c (is_sigtramp_address):
Likewise.
* sysdeps/unix/sysv/linux/aarch64/init-first.c: Remove file.
* sysdeps/unix/sysv/linux/aarch64/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/arm/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/arm/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/mips/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/mips/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/i386/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/riscv/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/s390/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/s390/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/x86/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/sysdep.h
(HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Define value based on kernel exported
name.
* sysdeps/unix/sysv/linux/arm/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sysdep.h
(HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETCPU_VSYSCALL, HAVE_TIME_VSYSCALL, HAVE_GET_TBFREQ,
HAVE_SIGTRAMP_RT64, HAVE_SIGTRAMP_32, HAVE_SIGTRAMP_RT32i,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/riscv/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL,
HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL,
HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL,
HAVE_GETTIMEOFDAY_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h
(HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL,
HAVE_GETCPU_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/dl-vdso.h (VDSO_NAME, VDSO_HASH): Define to
invalid names if architecture does not define them.
(get_vdso_mangle_symbol): New symbol.
* sysdeps/unix/sysv/linux/init-first.c: New file.
* sysdeps/unix/sysv/linux/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/init-first.c (gettimeofday,
clock_gettime, clock_getres, getcpu, time): Remove declaration.
(__libc_vdso_platform_setup_arch): Likewise and use
get_vdso_mangle_symbol to setup vDSO symbols.
(sigtramp_rt64, sigtramp32, sigtramp_rt32, get_tbfreq): Add
attribute_hidden.
* sysdeps/unix/sysv/linux/powerpc/libc-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/sysdep-vdso.h (VDSO_SYMBOL): Remove
definition.
Fix a small error in the HP_TIMING_PRINT trailing zero setting; the '\0'
should be set at MIN(Len,string length), instead of always at the 'Len'
position.
* sysdeps/generic/hp-timing-common.h (HP_TIMING_PRINT): Correct
position of string null termination.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On alpha, Linux kernel 5.1 added the standard getegid, geteuid and
getppid syscalls (commit ecf7e0a4ad15287). Up to now alpha was using
the corresponding OSF1 syscalls through:
- sysdeps/unix/alpha/getegid.S
- sysdeps/unix/alpha/geteuid.S
- sysdeps/unix/alpha/getppid.S
When building against kernel headers >= 5.1, the glibc now use the new
syscalls through sysdeps/unix/sysv/linux/syscalls.list. When it is then
used with an older kernel, the corresponding 3 functions fail.
A quick fix is to move the OSF1 wrappers under the
sysdeps/unix/sysv/linux/alpha directory so they override the standard
linux ones. A better fix would be to try the new syscalls and fallback
to the old OSF1 in case the new ones fail. This can be implemented in
a later commit.
Changelog:
[BZ #24986]
* sysdeps/unix/alpha/getegid.S: Move to ...
* sysdeps/unix/sysv/linux/alpha/getegid.S: ... here.
* sysdeps/unix/alpha/geteuid.S: Move to ...
* sysdeps/unix/sysv/linux/alpha/geteuid.S: ... here.
* sysdeps/unix/alpha/getppid.S: Move to ...
* sysdeps/unix/sysv/linux/alpha/getppid.S: ... here
This propagates the recent http->https URL changes.
Since I used gperf 3.1 to regenerate, this is also a minor
internal-to-localedef API change.
URL problem reported by Joseph Myers in:
https://www.sourceware.org/ml/libc-alpha/2019-09/msg00143.html
* locale/programs/charmap-kw.h, locale/programs/locfile-kw.h:
Regenerate with gperf 3.1.
* locale/programs/linereader.h (kw_hash_fct_t):
* locale/programs/repertoire.c (repertoiremap_hash):
2nd arg is now size_t not unsigned, for compatibility with gperf 3.1.
Since the commit
commit 42760d7646
Author: Joseph Myers <joseph@codesourcery.com>
Date: Thu Aug 15 15:18:34 2019 +0000
Make totalorder and totalordermag functions take pointer arguments.
the test case math/test-totalorderl-ldbl-128ibm fails on every input
pair, when compiled with -O2, which is the case for glibc test suite.
Debugging showed that the test case is passing arguments incorrectly to
totalorderl. This can also be inferred by the fact that compiling the
test case with -O0 hides the bug.
The documentation for the const attribute in GCC manual reads:
Note that a function that has pointer arguments and examines the data
pointed to must not be declared const if the pointed-to data might
change between successive invocations of the function. In general,
since a function cannot distinguish data that might change from data
that cannot, const functions should never take pointer or, in C++,
reference arguments. Likewise, a function that calls a non-const
function usually must not be const itself.
Since the pointed-to data is likely to be changed by user code between
invocations of totalorder*, this patch removes the const attribute from
the declarations of all totalorder functions, replacing it with the pure
attribute, as suggested in the manual:
The pure attribute imposes similar but looser restrictions on a
function’s definition than the const attribute: pure allows the
function to read any non-volatile memory, even if it changes in
between successive invocations of the function.
Tested for powerpc64le and x86_64.
Add a macro to linux/kernel-features.h, __ASSUME_TIME64_SYSCALLS, to
indicate whether the kernel can be assumed to provide a set of system
calls that process 64-bit time_t.
__ASSUME_TIME64_SYSCALLS does not indicate whether time_t is actually
64 bits (that's __TIMEBITS) and also does not indicate whether the
64-bit time_t system calls have "time64" suffixes on their names.
Code that uses __ASSUME_TIME64_SYSCALLS will be added in subsequent
patches.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_TIME64_SYSCALLS): New macro.
Reviewed-by: Alistair Francis <alistair23@gmail.com>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Zack Weinberg <zackw@panix.com>
In glibc 2.17, the functions clock_getcpuclockid, clock_getres,
clock_gettime, clock_nanosleep, and clock_settime were moved from
librt.so to libc.so, leaving compatibility stubs behind. Now that the
dynamic linker no longer insists on finding versioned symbols in the
same library that originally defined them, we do not need the stubs
anymore, and this means we don't need GLIBC_PRIVATE __-prefix aliases
for most of the functions anymore either. (clock_gettime still needs
one.) For ports added before 2.17, libc.so needs to provide two
symbol versions for each, the default at GLIBC_2.17 plus a compat
version matching what librt had.
While I'm at it, move the clock_*.c files and their tests from rt/ to
time/.
struct charseq used a zero-length array instead of a flexible array
member. This required a strange construct to initialize struct
charseq objects, and GCC 10 warns about that:
cc1: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
In file included from programs/repertoire.h:24,
from programs/localedef.h:32,
from programs/ld-ctype.c:35:
programs/charmap.h:63:17: note: destination object declared here
63 | unsigned char bytes[0];
| ^~~~~
cc1: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
programs/charmap.h:63:17: note: destination object declared here
cc1: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
programs/charmap.h:63:17: note: destination object declared here
cc1: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
programs/charmap.h:63:17: note: destination object declared here
The change makes the object physically const, but it is not expected
to be modified.
Historically autofs mounts were not included in mount table
listings. This is the case in other SysV autofs implementations
and was also the case with Linux autofs.
But now that /etc/mtab is a symlink to the proc filesystem
mount table the autofs mount entries appear in the mount table
on Linux.
Prior to the symlinking of /etc/mtab mount table it was
sufficient to call mount(2) and simply not update /etc/mtab
to exclude autofs mounts from mount listings.
Also, with the symlinking of /etc/mtab we have seen a shift in
usage toward using the proc mount tables directly.
But the autofs mount entries need to be retained when coming
from the proc file system for applications that need them
(largely autofs file system users themselves) so filtering out
these entries within the kernel itself can't be done. So it
needs be done in user space.
There are three reasons to omit the autofs mount entries.
One is that certain types of auto-mounts have an autofs mount
for every entry in their autofs mount map and these maps can
be quite large. This leads to mount table listings containing
a lot of unnecessary entries.
Also, this change in behaviour between autofs implementations
can cause problems for applications that use getmntent(3) in
other OS implementations as well as Linux.
Lastly, there's very little that user space can do with autofs
mount entries since this must be left to the autofs mount owner,
typically the automount daemon. But it can also lead to attempts
to access automount managed paths resulting mounts being triggered
when they aren't needed or mounts staying mounted for much longer
thay they need be. While the point of this change ins't to help
with these problems (and it can be quite a problem) it may be
a welcome side effect.
So the Linux autofs file system has been modified to accept a
pseudo mount option of "ignore" (as is used in other OS
implementations) so that user space can use this as a hint to
skip autofs entries on reading the mount table.
The Linux autofs automount daemon used getmntent(3) itself and
has been modified to use the proc file system directly so that
it can "ignore" mount option.
The use of this mount option is opt-in and a configuration
option has been added which defaults to not use this option
so if there are applications that need these entries, other
than autofs itself, they can be retained. Also, since this
filtering is based on an added mount option earlier versions
of Linux autofs iand other autofs file system users will not
use the option and so won't be affected by the change.
Use the generic C memset/memcpy/memmove in benchtests since comparing
against a slow byte-oriented implementation makes no sense.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-29 Wilco Dijkstra <wdijkstr@arm.com>
* benchtests/bench-memcpy.c (simple_memcpy): Remove.
(generic_memcpy): Include generic C memcpy.
* benchtests/bench-memmove.c (simple_memmove): Remove.
(generic_memmove): Include generic C memmove.
* benchtests/bench-memset.c (simple_memset): Remove.
(generic_memset): Include generic C memset.
* benchtests/bench-memset-large.c (simple_memset): Remove.
(generic_memset): Include generic C memset.
* benchtests/bench-memset-walk.c (simple_memset): Remove.
(generic_memset): Include generic C memset.
* string/memcpy.c (MEMCPY): Add defines to enable redirection.
* string/memset.c (MEMSET): Likewise.
* sysdeps/x86_64/memcopy.h: Remove empty file.
* sysdeps/mach/hurd/i386/sigreturn.c (__sigreturn2): New function,
unlocks SS and returns to the saved PC.
(__sigreturn): Do not unlock SS, and "return" into __sigreturn2 on the
thread stack instead of the saved PC.
Optimizing anonymous maps brings bugs, and does not optimize much anyway.
[BZ #19903]
* sysdeps/mach/hurd/mmap.c (__mmap): Remove optimizing anonymous maps
as __vm_allocate.
This fixes the following:
- On error, poll must not return without polling, including EBADF, and instead
report POLLHUP/POLLERR/POLLNVAL
- Select must report EBADF if some set contains an invalid FD.
The idea is to move error management to after all select calls, in the
poll/select final treatment. The error is instead recorded in a new `error'
field, and a new SELECT_ERROR bit set.
Thanks Svante Signell for the initial version of the patch.
* hurd/hurdselect.c (SELECT_ERROR): New macro.
(_hurd_select):
- Add `error' field to `d' structures array.
- If a poll descriptor is bogus, set EBADF, but continue with a zero
timeout.
- Go through the whole fd_set, not only until _hurd_dtablesize. Return
EBADF there is any bit set above _hurd_dtablesize.
- Do not request io_select on bogus descriptors (SELECT_ERROR).
- On io_select request error, record the error.
- On io_select bogus reply, use EIO error code.
- On io_select bogus or error reply, record the error.
- Do not destroy reply port for bogus FDs.
- On error, make poll set POLLHUP in the EPIPE case, POLLNVAL in the
EBADF case, or else POLLERR.
- On error, make select simulated readiness.
Rely on servers to implement timeouts, so that very short values (including
0) don't make mach_msg return before valid replies can be received. The
purpose of this scheme is to guarantee a full client-server round-trip,
whatever the timeout value.
This change depends on the new io_select_timeout RPC being implemented by
servers.
* hurd/Makefile (user-interfaces): Add io_reply and io_request.
* hurd/hurdselect.c: Include <sys/time.h>, <hurd/io_request.h> and
<limits.h>.
(_hurd_select): Replace the call to __io_select with either
__io_select_request or __io_select_timeout_request, depending on the
timeout. Count the number of ready descriptors (replies for which at
least one type bit is set). Implement the timeout locally when there is
no file descriptor.
To be efficient, the remap translator simply returns ports from the underlying
filesystem, and thus the root directory found through browsing '..' is the
underlying root, not the remap root. This should not be a reason for getcwd to
fail.
* sysdeps/mach/hurd/getcwd.c (_hurd_canonicalize_directory_name_internal): Do
not remove the heading slash if we got an unknown root directory.
(__getcwd): Do not fail with EGRATUITOUS if we got an unknown root directory.
The preemptor sigcode doesn't match since the POSIX sigcode SI_TIMER is
used when SIGALRM is sent. In addition, The inline version of
hurd_preempt_signals doesn't update _hurdsig_preempted_set. For these
reasons, the preemptor would be skipped by post_signal.
* sysdeps/mach/hurd/setitimer.c (setitimer_locked): Fix preemptor setup.
The function attempts to optimize this case by performing one IPC system
call with the timeout included among the parameters, but in the absence
of a reply, it will call mach_msg again with the same timeout later,
effectively doubling the total timeout of the select/poll call.
Remove this optimization for the time being.
* hurd/hurdselect.c (_hurd_select): Always call __io_select with no
timeout.
This patch is a reimplementation of [1], which was submitted back in
2015. Copyright issue has been sorted [2] last year. It proposed a new
section (.gnu.xhash) and related dynamic tag (GT_GNU_XHASH). The new
section would be virtually identical to the existing .gnu.hash except
for the translation table (xlat) which would contain correct MIPS
.dynsym indexes corresponding to the hashvals in chains. This is because
MIPS ABI imposes a different ordering of the dynsyms than the one
expected by the .gnu.hash section. Another addition would be a leading
word at the beggining of the section, which would contain the number of
entries in the translation table.
In this patch, the new section name and dynamic tag are changed to
reflect the fact that the section should be treated as MIPS specific
(.MIPS.xhash and DT_MIPS_XHASH).
This patch addresses the alignment issue reported in [3] which is caused
by the leading word of the .MIPS.xhash section. Leading word is now
removed in the corresponding binutils patch, and the number of entries
in the translation table is computed using DT_MIPS_SYMTABNO dynamic tag.
Since the MIPS specific dl-lookup.c file was removed following the
initial patch submission, I opted for the definition of three new macros
in the generic ldsodefs.h. ELF_MACHINE_GNU_HASH_ADDRIDX defines the
index of the dynamic tag in the l_info array. ELF_MACHINE_HASH_SYMIDX is
used to calculate the index of a symbol in GNU hash. On MIPS, it is
defined to look up the symbol index in the translation table.
ELF_MACHINE_XHASH_SETUP is defined for MIPS only. It initializes the
.MIPS.xhash pointer in the link_map_machine struct.
The other major change is bumping the highest EI_ABIVERSION value for
MIPS to suggest that the dynamic linker now supports GNU hash.
The patch was tested by running the glibc testsuite for the three MIPS
ABIs (o32, n32 and n64) and for x86_64-linux-gnu.
[1] https://sourceware.org/ml/binutils/2015-10/msg00057.html
[2] https://sourceware.org/ml/binutils/2018-03/msg00025.html
[3] https://sourceware.org/ml/binutils/2016-01/msg00006.html
* elf/dl-addr.c (determine_info): Calculate the symbol index
using the newly defined ELF_MACHINE_HASH_SYMIDX macro.
* elf/dl-lookup.c (do_lookup_x): Ditto.
(_dl_setup_hash): Initialize MIPS xhash translation table.
* elf/elf.h (SHT_MIPS_XHASH): New define.
(DT_MIPS_XHASH): New define.
* sysdeps/generic/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New
define.
(ELF_MACHINE_HASH_SYMIDX): Ditto.
(ELF_MACHINE_XHASH_SETUP): Ditto.
* sysdeps/mips/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New
define.
(ELF_MACHINE_HASH_SYMIDX): Ditto.
(ELF_MACHINE_XHASH_SETUP): Ditto.
* sysdeps/mips/linkmap.h (struct link_map_machine): New member.
* sysdeps/unix/sysv/linux/mips/ldsodefs.h: Increment valid ABI
version.
* sysdeps/unix/sysv/linux/mips/libc-abis: New ABI version.
The fix for BZ#18231 requires new symbols only for sh4eb. This patch
adds the required folder and files for both BE and LE abilist. No
semantic changes are expected.
Checked with check-abi for sh4eb-linux-gnu and sh4-linux-gnu.
* sysdeps/sh/preconfigure.ac: New file.
* sysdeps/sh/preconfigure: Regenerate.
* sysdeps/sh/be/sh3/Implies: New file.
* sysdeps/sh/be/sh4/Implies: Likewise.
* sysdeps/sh/le/sh3/Implies: Likewise.
* sysdeps/sh/le/sh4/Implies: Likewise.
* sysdeps/unix/sysv/linux/sh/le/sh3/Implies: Likewise.
* sysdeps/unix/sysv/linux/sh/le/sh4/Implies: Likewise.
* sysdeps/unix/sysv/linux/sh/*.abilist: Move to
sysdeps/unix/sysv/linux/sh/le/*.abilist.
* sysdeps/unix/sysv/linux/sh/be/*.abilist: New files.
The fix for BZ#18231 requires new symbols only for microblaze. This patch
adds the required folder and files for both BE and LE abilist. No semantic
changes are expected.
Checked with check-abi for microblaze-linux-gnueabihf and
microblazeel-linux-gnueabihf.
* sysdeps/microblaze/preconfigure.ac: New file.
* sysdeps/microblaze/preconfigure: Regenerate.
* sysdeps/microblaze/be/implies: New file.
* sysdeps/microblaze/le/implies: Likewise.
* sysdeps/unix/sysv/linux/microblaze/be/implies: Likewise.
* sysdeps/unix/sysv/linux/microblaze/le/implies: Likewise.
* sysdeps/unix/sysv/linux/microblaze/*.abilist. Move to
sysdeps/unix/sysv/linux/microblaze/be/*.abilist.
* sysdeps/unix/sysv/linux/microblaze/le/*.abilist: New files.
The fix for BZ#18231 requires new symbols only for armeb. This patch
adds the required folder and files for both BE and LE abilist. No
semantic changes are expected.
Checked with check-abi for arm-linux-gnueabihf and armeb-linux-gnueabihf.
* sysdeps/arm/preconfigure.ac: Set machine based on endianness.
* sysdeps/arm/preconfigure: Regenerate.
* sysdeps/arm/be/Implies: New file.
* sysdeps/arm/be/armv6/Implies: Likewise.
* sysdeps/arm/be/armv6t2/Implies: Likewise.
* sysdeps/arm/be/armv7/Implies: Likewise.
* sysdeps/arm/le/Implies: Likewise.
* sysdeps/unix/sysv/linux/arm/be/Implies: Likewise.
* sysdeps/unix/sysv/linux/arm/le/Implies: Likewise.
* sysdeps/unix/sysv/linux/arm/*.abilist: Move to
sysdeps/unix/sysv/linux/arm/le/*.abilist.
* sysdeps/unix/sysv/linux/arm/be/l*.abilist: New files.
Problem reported by Stefan Liebler in:
https://sourceware.org/ml/libc-alpha/2019-08/msg00658.html
* posix/tst-regex.c: Convert this file from Latin-1 to UTF-8.
(do_test, test_expr): Adjust to the fact that this source file,
and the test data in ChangeLog.8, is now UTF-8 instead of Latin-1.
* posix/tst-regex.input: Copy from ChangeLog.old/ChangeLog.8,
so that it is now UTF-8.
fegetenv_status() wants to use the lighter weight instruction 'mffsl'
for reading the Floating-Point Status and Control Register (FPSCR).
It currently will use it directly if compiled '-mcpu=power9', and will
perform a runtime check (cpu_supports("arch_3_00")) otherwise.
Nicely, it turns out that the 'mffsl' instruction will decode to
'mffs' on architectures older than "arch_3_00" because the additional
bits set for 'mffsl' are "don't care" for 'mffs'. 'mffs' is a superset
of 'mffsl'.
So, just generate 'mffsl'.
fesetenv() reads the current value of the Floating-Point Status and Control
Register (FPSCR) to determine the difference between the current state of
exception enables and the newly requested state. All of these bits are also
returned by the lighter weight 'mffsl' instruction used by fegetenv_status().
Use that instead.
Also, remove a local macro _FPU_MASK_ALL in favor of a common macro,
FPU_ENABLES_MASK from fenv_libc.h.
Finally, use a local variable ('new') in favor of a pointer dereference
('*envp').
SET_RESTORE_ROUND uses libc_feholdsetround_ppc_ctx and
libc_feresetround_ppc_ctx to bracket a block of code where the floating point
rounding mode must be set to a certain value.
For the *prologue*, libc_feholdsetround_ppc_ctx is used and performs:
1. Read/save FPSCR.
2. Create new value for FPSCR with new rounding mode and enables cleared.
3. If new value is different than current value,
a. If transitioning from a state where some exceptions enabled,
enter "ignore exceptions / non-stop" mode.
b. Write new value to FPSCR.
c. Put a mark on the wall indicating the FPSCR was changed.
(1) uses the 'mffs' instruction. On POWER9, the lighter weight 'mffsl'
instruction can be used, but it doesn't return all of the bits in the FPSCR.
fegetenv_status uses 'mffsl' on POWER9, 'mffs' otherwise, and can thus be
used instead of fegetenv_register.
(3b) uses 'mtfsf 0b11111111' to write the entire FPSCR, so it must
instead use 'mtfsf 0b00000011' to write just the enables and the mode,
because some of the rest of the bits are not valid if 'mffsl' was used.
fesetenv_mode uses 'mtfsf 0b00000011' on POWER9, 'mtfsf 0b11111111'
otherwise.
For the *epilogue*, libc_feresetround_ppc_ctx checks the mark on the wall, then
calls libc_feresetround_ppc, which just calls __libc_femergeenv_ppc with
parameters such that it performs:
1. Retreive saved value of FPSCR, saved in prologue above.
2. Read FPSCR.
3. Create new value of FPSCR where:
- Summary bits and exception indicators = current OR saved.
- Rounding mode and enables = saved.
- Status bits = current.
4. If transitioning from some exceptions enabled to none,
enter "ignore exceptions / non-stop" mode.
5. If transitioning from no exceptions enabled to some,
enter "catch exceptions" mode.
6. Write new value to FPSCR.
The summary bits are hardwired to the exception indicators, so there is no
need to restore any saved summary bits.
The exception indicator bits, which are sticky and remain set unless
explicitly cleared, would only need to be restored if the code block
might explicitly clear any of them. This is certainly not expected.
So, the only bits that need to be restored are the enables and the mode.
If it is the case that only those bits are to be restored, there is no need to
read the FPSCR. Steps (2) and (3) are unnecessary, and step (6) only needs to
write the bits being restored.
We know we are transitioning out of "ignore exceptions" mode, so step (4) is
unnecessary, and in step (6), we only need to check the state we are
entering.
Since fe{en,dis}ableexcept() and fesetmode() read-modify-write just the
"mode" (exception enable and rounding mode) bits of the Floating Point Status
Control Register (FPSCR), the lighter weight 'mffsl' instruction can be used
to read the FPSCR (enables and rounding mode), and 'mtfsf 0b00000011' can be
used to write just those bits back to the FPSCR. The net is better performance.
In addition, fe{en,dis}ableexcept() read the FPSCR again after writing it, or
they determine that it doesn't need to be written because it is not changing.
In either case, the local variable holds the current values of the enable
bits in the FPSCR. This local variable can be used instead of again reading
the FPSCR.
Also, that value of the FPSCR which is read the second time is validated
against the requested enables. Since the write can't fail, this validation
step is unnecessary, and can be removed. Instead, the exceptions to be
enabled (or disabled) are transformed into available bits in the FPSCR,
then validated after being transformed back, to ensure that all requested
bits are actually being set. For example, FE_INVALID_SQRT can be
requested, but cannot actually be set. This bit is not mapped during the
transformations, so a test for that bit being set before and after
transformations will show the bit would not be set, and the function will
return -1 for failure.
Finally, convert the local macros in fesetmode.c to more generally useful
macros in fenv_libc.h.
The exceptions passed to fe{en,dis}ableexcept() are defined in the ABI
as a bitmask, a combination of FE_INVALID, FE_OVERFLOW, etc.
Within the functions, these bits must be translated to/from the corresponding
enable bits in the Floating Point Status Control Register (FPSCR).
This translation is currently done bit-by-bit. The compiler generates
a series of conditional bit operations. Nicely, the "FE" exception
bits are all a uniform offset from the FPSCR enable bits, so the bit-by-bit
operation can instead be performed by a shift with appropriate masking.
Both the buffer and struct mntent are now allocated on the heap.
This results in a slight reduction of RSS usage.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The internal_getut_r function updates the file_offset variable and
therefore must always update last_entry as well.
Previously, if pututxline could not upgrade the read lock to a
write lock, internal_getut_r would update file_offset only,
without updating last_entry, and a subsequent call would not
overwrite the existing utmpx entry at file_offset, instead
creating a new entry. This has been observed to cause unbounded
file growth in high-load situations.
This commit removes the buffer argument to internal_getut_r and
updates the last_entry variable directly, along with file_offset.
Initially reported and fixed by Ondřej Lysoněk.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
The recent commit e6855a3bdf
changed the encoding of ChangeLog.old/ChangeLog.8 from ISO-8859 to UTF-8.
Unfortunately the test posix/tst-regex assumes the former encoding.
Furthermore Francesco Potortì is now written with 'ì' instead of 'i`'
which would lead to two further matches in the first call to test_expr.
This patch just copies the former ChangeLog.8 file to tst-regex.input
and adjusts the test in order to use this new input file.
ChangeLog:
* posix/tst-regex.c (do_test): Use tst-regex.input as input file.
* posix/tst-regex.input: New file.
This bumps the highest valid EI_ABIVERSION value to ABSOLUTE ABI.
New testcase loads the symbol from the GOT with the "lb" instruction
so that the EI_ABIVERSION header field of the shared object is set
to ABSOLUTE (it doesn't actually check the value of the symbol), and
makes sure that the main executable is executed without "ABI version
invalid" error.
Tested for all three ABIs (o32, n32, n64) using both static linker which
handles undefined weak symbols correctly [1] (and sets the EI_ABIVERSION
of the test module) and the one that doesn't (EI_ABIVERSION left as 0).
[1] https://sourceware.org/ml/binutils/2018-07/msg00268.html
[BZ #24916]
* sysdeps/mips/Makefile [$(subdir) = elf] (tests): Add
tst-undefined-weak.
[$(subdir) = elf] (modules-names): Add tst-undefined-weak-lib.
[$(subdir) = elf] ($(objpfx)tst-undefined-weak): Add dependency.
* sysdeps/mips/tst-undefined-weak-lib.S: New file.
* sysdeps/mips/tst-undefined-weak.c: Likewise.
* sysdeps/unix/sysv/linux/mips/ldsodefs.h (VALID_ELF_ABIVERSION):
Increment highest valid ABIVERSION value.
Linux/Mips kernels prior to 4.8 could potentially crash the user
process when doing FPU emulation while running on non-executable
user stack.
Currently, gcc doesn't emit .note.GNU-stack for mips, but that will
change in the future. To ensure that glibc can be used with such
future gcc, without silently resulting in binaries that might crash
in runtime, this patch forces RWX stack for all built objects if
configured to run against minimum kernel version less than 4.8.
* sysdeps/unix/sysv/linux/mips/Makefile
(test-xfail-check-execstack):
Move under mips-has-gnustack != yes.
(CFLAGS-.o*, ASFLAGS-.o*): New rules.
Apply -Wa,-execstack if mips-force-execstack == yes.
* sysdeps/unix/sysv/linux/mips/configure: Regenerated.
* sysdeps/unix/sysv/linux/mips/configure.ac
(mips-force-execstack): New var.
Set to yes for hard-float builds with minimum_kernel < 4.8.0
or minimum_kernel not set at all.
(mips-has-gnustack): New var.
Use value of libc_cv_as_noexecstack
if mips-force-execstack != yes, otherwise set to no.
As indicated by Joseph's comment on BZ#17726, this symbol is most
likely a historical ABI accident. This patch make it on both arm
and sparc ABIs a compat_symbol.
Checked against a build arm-linux-gnueabihf, sparcv9-linux-gnu, adn
sparc64-linux-gnu to see if the symbol is still present.
* gmon/Versions (libc) [GLIBC_2.31]: New entry.
* sysdeps/unix/sysv/linux/arm/profil-counter.h (profil_counter):
Make a compat_symbol.
* sysdeps/unix/sysv/linux/sparc/profil-counter.h
(__profil_counter_global): Likewise.
