The functions encrypt, setkey, encrypt_r, setkey_r, cbc_crypt,
ecb_crypt, and des_setparity should not be used in new programs,
because they use the DES block cipher, which is unacceptably weak by
modern standards. Demote all of them to compatibility symbols, and
remove their prototypes from installed headers. cbc_crypt, ecb_crypt,
and des_setparity were already compat symbols when glibc was
configured with --disable-obsolete-rpc.
POSIX requires encrypt and setkey to be available when _XOPEN_CRYPT
is defined, so this change also removes the definition of X_OPEN_CRYPT
from <unistd.h>.
The entire "DES Encryption" section is dropped from the manual, as is
the mention of AUTH_DES and FIPS 140-2 in the introduction to
crypt.texi. The documentation of 'memfrob' cross-referenced the DES
Encryption section, which is replaced by a hyperlink to libgcrypt, and
while I was in there I spruced up the actual documentation of
'memfrob' and 'strfry' a little. It's still fairly jokey, because
those functions _are_ jokes, but they do also have real use cases, so
people trying to use them for real should have all the information
they need.
DES-based authentication for Sun RPC is also insecure and should be
deprecated or even removed, but maybe that can be left as TI-RPC's
problem.
As noted in bug 13888, and as I noted previously in
<https://sourceware.org/ml/libc-alpha/2000-10/msg00111.html>, various
tests used hardcoded paths in /tmp, so posing issues for simultaneous
test runs from different build directories.
This patch fixes such uses of hardcoded file names to put them in the
build directory instead (in the case of stdio-common/bug5 the file
names are changed as well, to avoid a conflict with the name bug5.out
also used for the automatic test output redirection). It also fixes
test-installation.pl likewise (that was using filenames with $$ in
them rather than strictly hardcoded names, but that's still not good
practice for temporary file naming).
Note that my list of files changed is not identical to that in bug
13888. I added tst-spawn3.c and test-installation.pl, and removed
some tests that seem to me (now) to create temporary files securely
(simply using /tmp is not itself a problem if the temporary files are
handled properly with mkstemp; I haven't checked whether those tests
used to do things insecurely). conformtest is not changed because the
makefiles always pass a --tmpdir option so the /tmp default is
irrelevant, and for the same reason there is no actual problem with
nptl/tst-umask1.c because again the makefiles always override the
default.
nptl/sockperf.c is ignored because there is no code to run it;
probably that file should actually be removed.
Some tests use the mktemp function, but I think they all use it in a
way that *is* secure (for generating names for directories / sockets /
fifos / symlinks, where the operation using the name will not follow
symlinks and so there is no potential for a symlink attack on the
account running the testsuite).
Some tests use the tmpnam function to generate temporary file names.
This is in principle insecure, but not addressed by this patch (I
consider it a separate issue from the fully hardcoded paths).
Tested for x86_64.
[BZ #13888]
* posix/Makefile (CFLAGS-tst-spawn3.c): New variable.
* posix/tst-spawn3.c (do_test): Put tst-spwan3.pid in OBJPFX, not
/tmp.
* scripts/test-installation.pl: Put temporary files in build
directory, not /tmp.
* stdio-common/Makefile (CFLAGS-bug3.c): New variable.
(CFLAGS-bug4.c): Likewise.
(CFLAGS-bug5.c): Likewise.
(CFLAGS-test-fseek.c): Likewise.
(CFLAGS-test-popen.c): Likewise.
(CFLAGS-test_rdwr.c): Likewise.
* stdio-common/bug3.c (main): Put temporary file in OBJPFX, not
/tmp.
* stdio-common/bug4.c (main): Likewise.
* stdio-common/bug5.c (main): Likewise.
* stdio-common/test-fseek.c (TESTFILE): Likewise.
* stdio-common/test-popen.c (do_test): Likewise.
* stdio-common/test_rdwr.c (main): Likewise.
Neither the <dlfcn.h> entry points, nor lazy symbol resolution, nor
initial shared library load-up, are cancellation points, so ld.so
should exclusively use I/O primitives that are not cancellable. We
currently achieve this by having the cancellation hooks compile as
no-ops when IS_IN(rtld); this patch changes to using exclusively
_nocancel primitives in the source code instead, which makes the
intent clearer and significantly reduces the amount of code compiled
under IS_IN(rtld) as well as IS_IN(libc) -- in particular,
elf/Makefile no longer thinks we require a copy of unwind.c in
rtld-libc.a. (The older mechanism is preserved as a backstop.)
The bulk of the change is splitting up the files that define the
_nocancel I/O functions, so they don't also define the variants that
*are* cancellation points; after which, the existing logic for picking
out the bits of libc that need to be recompiled as part of ld.so Just
Works. I did this for all of the _nocancel functions, not just the
ones used by ld.so, for consistency.
fcntl was a little tricky because it's only a cancellation point for
certain opcodes (F_SETLKW(64), which can block), and the existing
__fcntl_nocancel wasn't applying the FCNTL_ADJUST_CMD hook, which
strikes me as asking for trouble, especially as the only nontrivial
definition of FCNTL_ADJUST_CMD (for powerpc64) changes F_*LK* opcodes.
To fix this, fcntl_common moves to fcntl_nocancel.c along with
__fcntl_nocancel, and changes its name to the extern (but hidden)
symbol __fcntl_nocancel_adjusted, so that regular fcntl can continue
calling it. __fcntl_nocancel now applies FCNTL_ADJUST_CMD; so that
both both fcntl.c and fcntl_nocancel.c can see it, the only nontrivial
definition moves from sysdeps/u/s/l/powerpc/powerpc64/fcntl.c to
.../powerpc64/sysdep.h and becomes entirely a macro, instead of a macro
that calls an inline function.
The nptl version of libpthread also changes a little, because its
"compat-routines" formerly included files that defined all the
_nocancel functions it uses; instead of continuing to duplicate them,
I exported the relevant ones from libc.so as GLIBC_PRIVATE. Since the
Linux fcntl.c calls a function defined by fcntl_nocancel.c, it can no
longer be used from libpthread.so; instead, introduce a custom
forwarder, pt-fcntl.c, and export __libc_fcntl from libc.so as
GLIBC_PRIVATE. The nios2-linux ABI doesn't include a copy of vfork()
in libpthread, and it was handling that by manipulating
libpthread-routines in .../linux/nios2/Makefile; it is cleaner to do
what other such ports do, and have a pt-vfork.S that defines no symbols.
Right now, it appears that Hurd does not implement _nocancel I/O, so
sysdeps/generic/not-cancel.h will forward everything back to the
regular functions. This changed the names of some of the functions
that sysdeps/mach/hurd/dl-sysdep.c needs to interpose.
* elf/dl-load.c, elf/dl-misc.c, elf/dl-profile.c, elf/rtld.c
* sysdeps/unix/sysv/linux/dl-sysdep.c
Include not-cancel.h. Use __close_nocancel instead of __close,
__open64_nocancel instead of __open, __read_nocancel instead of
__libc_read, and __write_nocancel instead of __libc_write.
* csu/check_fds.c (check_one_fd)
* sysdeps/posix/fdopendir.c (__fdopendir)
* sysdeps/posix/opendir.c (__alloc_dir): Use __fcntl_nocancel
instead of __fcntl and/or __libc_fcntl.
* sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np)
* sysdeps/unix/sysv/linux/pthread_getname.c (pthread_getname_np)
* sysdeps/unix/sysv/linux/i386/smp.h (is_smp_system):
Use __open64_nocancel instead of __open_nocancel.
* sysdeps/unix/sysv/linux/not-cancel.h: Move all of the
hidden_proto declarations to the end and issue them if either
IS_IN(libc) or IS_IN(rtld).
* sysdeps/unix/sysv/linux/Makefile [subdir=io] (sysdep_routines):
Add close_nocancel, fcntl_nocancel, nanosleep_nocancel,
open_nocancel, open64_nocancel, openat_nocancel, pause_nocancel,
read_nocancel, waitpid_nocancel, write_nocancel.
* io/Versions [GLIBC_PRIVATE]: Add __libc_fcntl,
__fcntl_nocancel, __open64_nocancel, __write_nocancel.
* posix/Versions: Add __nanosleep_nocancel, __pause_nocancel.
* nptl/pt-fcntl.c: New file.
* nptl/Makefile (pthread-compat-wrappers): Remove fcntl.
(libpthread-routines): Add pt-fcntl.
* include/fcntl.h (__fcntl_nocancel_adjusted): New function.
(__libc_fcntl): Remove attribute_hidden.
* sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Call
__fcntl_nocancel_adjusted, not fcntl_common.
(__fcntl_nocancel): Move to new file fcntl_nocancel.c.
(fcntl_common): Rename to __fcntl_nocancel_adjusted; also move
to fcntl_nocancel.c.
* sysdeps/unix/sysv/linux/fcntl_nocancel.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fcntl.c: Remove file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h:
Define FCNTL_ADJUST_CMD here, as a self-contained macro.
* sysdeps/unix/sysv/linux/close.c: Move __close_nocancel to...
* sysdeps/unix/sysv/linux/close_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/nanosleep.c: Move __nanosleep_nocancel to...
* sysdeps/unix/sysv/linux/nanosleep_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/open.c: Move __open_nocancel to...
* sysdeps/unix/sysv/linux/open_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/open64.c: Move __open64_nocancel to...
* sysdeps/unix/sysv/linux/open64_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/openat.c: Move __openat_nocancel to...
* sysdeps/unix/sysv/linux/openat_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/openat64.c: Move __openat64_nocancel to...
* sysdeps/unix/sysv/linux/openat64_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/pause.c: Move __pause_nocancel to...
* sysdeps/unix/sysv/linux/pause_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/read.c: Move __read_nocancel to...
* sysdeps/unix/sysv/linux/read_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/waitpid.c: Move __waitpid_nocancel to...
* sysdeps/unix/sysv/linux/waitpid_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/write.c: Move __write_nocancel to...
* sysdeps/unix/sysv/linux/write_nocancel.c: ...this new file.
* sysdeps/unix/sysv/linux/nios2/Makefile: Don't override
libpthread-routines.
* sysdeps/unix/sysv/linux/nios2/pt-vfork.S: New file which
defines nothing.
* sysdeps/mach/hurd/dl-sysdep.c: Define __read instead of
__libc_read, and __write instead of __libc_write. Define
__open64 in addition to __open.
Current posix_spawnp implementation wrongly tries to execute invalid
binaries (for instance script without shebang) as a shell script in
non compat mode. It was a regression introduced by
9ff72da471 when __spawni started to use
__execvpe instead of __execve (glibc __execvpe try to execute ENOEXEC
as shell script regardless).
This patch fixes it by using an internal symbol (__execvpex) with the
faulty semantic (since compat mode is handled by spawni.c itself).
It was reported by Daniel Drake on libc-help [1].
Checked on x86_64-linux-gnu and i686-linux-gnu.
[BZ #23264]
* include/unistd.h (__execvpex): New prototype.
* posix/Makefile (tests): Add tst-spawn4.
(tests-internal): Add tst-spawn4-compat.
* posix/execvpe.c (__execvpe_common, __execvpex): New functions.
* posix/tst-spawn4-compat.c: New file.
* posix/tst-spawn4.c: Likewise.
* sysdeps/unix/sysv/linux/spawni.c (__spawni): Do not interpret invalid
binaries as shell scripts.
* sysdeps/posix/spawni.c (__spawni): Likewise.
[1] https://sourceware.org/ml/libc-help/2018-06/msg00012.html
* bits/sched.h: Include <bits/types/struct_sched_param.h> and move struct
sched_param definition to it.
* sysdeps/unix/sysv/linux/bits/sched.h: Likewise.
* bits/types/struct_sched_param.h: New file.
* sysdeps/htl/bits/types/struct___pthread_attr.h: Include
<bits/types/struct_sched_param.h> instead of <sched.h>.
* posix/Makefile (headers): Add bits/types/struct_sched_param.h.
See:
http://pubs.opengroup.org/onlinepubs/7908799/xbd/re.html
> A range expression represents the set of collating elements that fall
> between two elements in the current collation sequence,
> inclusively. It is expressed as the starting point and the ending
> point separated by a hyphen (-).
>
> Range expressions must not be used in portable applications because
> their behaviour is dependent on the collating sequence. Ranges will be
> treated according to the current collating sequence, and include such
> characters that fall within the range based on that collating
> sequence, regardless of character values. This, however, means that
> the interpretation will differ depending on collating sequence. If,
> for instance, one collating sequence defines ä as a variant of a,
> while another defines it as a letter following z, then the expression
> [ä-z] is valid in the first language and invalid in the second.
Therefore, using [a-z] does not make much sense except in the C/POSIX locale.
The new iso14651_t1_common lists upper case and lower case Latin characters
in a different order than the old one which causes surprising results
for example in the de_DE locale: [a-z] now includes A because A comes
after a in iso14651_t1_common but does not include Z because that comes
after z in iso14651_t1_common.
* posix/tst-fnmatch.input: Fix results for range expressions
for non C locales.
* posix/tst-regexloc.c: Do not use a range expression for
de_DE.ISO-8859-1 locale.
This test case tests how many collating elements are defined in
da_DK.ISO-8859-1 locale. The da_DK locale source defines 4:
collating-element <A-A> from "<U0041><U0041>"
collating-element <A-a> from "<U0041><U0061>"
collating-element <a-A> from "<U0061><U0041>"
collating-element <a-a> from "<U0061><U0061>"
The new iso14651_t1_common file defines more collating elements, two
of them are in the ISO-8859-1 range:
collating-element <U004C_00B7> from "<U004C><U00B7>" % decomposition of LATIN CAPITAL LETTER L WITH MIDDLE DOT
collating-element <U006C_00B7> from "<U006C><U00B7>" % decomposition of LATIN SMALL LETTER L WITH MIDDLE DOT
So the total count is now 6 instead of 4.
* posix/bug-regex5.c: Fix test case because with the new
iso14651_t1_common file, the da_DK locale now has 6 collating elements
in the ISO-8859-1 range instead of 4 with the old iso14651_t1_common
file.
The tst-glob_lstat_compat test needs to run tests on the previous
version of glob. On alpha, there are three versions of glob, GLIBC_2.0,
GLIBC_2.1 and GLIBC_2.27, while on other architectures there are only
the GLIBC_2.0 and GLIBC_2.27 version. Therefore on alpha the previous
version is GLIBC_2.1 and not GLIBC_2.0.
Changelog:
[BZ #22818]
* posix/tst-glob_lstat_compat.c [__alpha__] (glob): Access
the GLIBC_2.1 version.
This completes the deprecation and removal of this inclusion, which
was begun in the 2.25 release.
* posix/sys/types.h: Don't include sys/sysmacros.h.
* misc/sys/sysmacros.h: Remove the conditional deprecation
warnings for the macros defined by this header.
As noted in bug 17979 (and as I noted earlier in
<https://sourceware.org/ml/libc-alpha/2012-02/msg00647.html>), uchar.h
has gratuitously complicated code to determine the types for char16_t
and char32_t, and to reject including that header for pre-C11
compilers not defining __CHAR16_TYPE__ and __CHAR32_TYPE__. Since
those types are always required to match uint_least16_t and
uint_least32_t, which glibc knows how to define without reference to
such predefined macros, it's safe just to define those types the same
as the *least* types are defined in stdint.h, so allowing the header
to work with (for example) GCC 4.3.
This patch implements that. bits/types.h is made to define
__int_leastN_t and __uint_leastN_t so the logic for those types can
stay in a single place, and stdint.h is made to use those __*_t to
define the public *_t types. uchar.h is then made to use
__uint_least16_t and __uint_least32_t to define char16_t and char32_t,
so simplifying the logic there. A new test is added that verifies the
types chosen for char16_t and char32_t do indeed match the types the
compiler uses for u"" and U"" string literals.
Tested for x86_64. (I have not tested with any of the older compilers
for which this would actually make a difference to whether you can
include uchar.h.)
[BZ #17979]
* posix/bits/types.h (__int_least8_t): New typedef.
(__uint_least8_t): Likewise.
(__int_least16_t): Likewise.
(__uint_least16_t): Likewise.
(__int_least32_t): Likewise.
(__uint_least32_t): Likewise.
(__int_least64_t): Likewise.
(__uint_least64_t): Likewise.
* sysdeps/generic/stdint.h (int_least8_t): Define using
__int_least8_t.
(int_least16_t): Define using __int_least16_t.
(int_least32_t): Define using __int_least32_t.
(int_least64_t): Define using __int_least64_t.
(uint_least8_t): Define using __uint_least8_t.
(uint_least16_t): Define using __uint_least16_t.
(uint_least32_t): Define using __uint_least32_t.
(uint_least64_t): Define using __uint_least64_t.
* wcsmbs/uchar.h: Include <bits/types.h>.
(char16_t): Define using __uint_least16_t conditional only on
[!__USE_ISOCXX11].
(char32_t): Define using __uint_least32_t conditional only on
[!__USE_ISOCXX11].
* wcsmbs/test-char-types.c: New file.
* wcsmbs/Makefile (tests): Add test-char-types.
Building with -Os produces linknamespace and localplt failures for,
among other functions, gnu_dev_major, gnu_dev_minor and
gnu_dev_makedev.
The issue is that those functions are not inlined when building with
-Os. While one could force them to be inlined in that case, it seems
more natural to fix this issue similarly to other namespace issues.
Thus, this patch makes gnu_dev_* into weak aliases for hidden symbols
__gnu_dev_*; __gnu_dev_* are then defined as inlines in the internal
include/sys/sysmacros.h, and uses of gnu_dev_* (often via the macros
major, minor and makedev) for which there are namespace issues are
changed to use __gnu_dev_*; where there are no namespace issues, use
of libc_hidden_proto serves to avoid unnecessary local PLT entry use.
Tested for x86_64, (a) without -Os, to verify the testsuite continues
to pass without problems and that the functions called under their new
names continue to be inlined as expected in that case; (b) with -Os,
to verify that the linknamespace and localplt failures in question go
away (but because of other such failures present, neither of the
relevant bugs can yet be closed).
[BZ #15105]
[BZ #19463]
* include/sys/sysmacros.h [!_ISOMAC]
(__SYSMACROS_NEED_IMPLEMENTATION): Define macro.
[!_SYS_SYSMACROS_H_WRAPPER && !_ISOMAC]
(_SYS_SYSMACROS_H_WRAPPER): Likewise.
[!_SYS_SYSMACROS_H_WRAPPER && !_ISOMAC] (gnu_dev_major): Use
libc_hidden_proto.
[!_SYS_SYSMACROS_H_WRAPPER && !_ISOMAC] (gnu_dev_minor): Likewise.
[!_SYS_SYSMACROS_H_WRAPPER && !_ISOMAC] (gnu_dev_makedev):
Likewise.
[!_SYS_SYSMACROS_H_WRAPPER && !_ISOMAC] (__SYSMACROS_DECL_TEMPL):
Undefine and redefine to add use __gnu_dev_ prefix.
[!_SYS_SYSMACROS_H_WRAPPER && !_ISOMAC] (__SYSMACROS_IMPL_TEMPL):
Likewise.
[!_SYS_SYSMACROS_H_WRAPPER && !_ISOMAC] (__gnu_dev_major): Declare
and define as hidden inline function.
[!_SYS_SYSMACROS_H_WRAPPER && !_ISOMAC] (__gnu_dev_minor):
Likewise.
[!_SYS_SYSMACROS_H_WRAPPER && !_ISOMAC] (__gnu_dev_makedev):
Likewise.
* misc/makedev.c (OUT_OF_LINE_IMPL_TEMPL): Use __gnu_dev_ prefix.
(gnu_dev_major): Use weak_alias and libc_hidden_weak.
(gnu_dev_minor): Likewise.
(gnu_dev_makedev): Likewise.
* csu/check_fds.c (check_one_fd): Use __gnu_dev_makedev instead of
makedev.
* posix/wordexp.c (exec_comm_child): Likewise.
* sysdeps/mach/hurd/xmknodat.c (__xmknodat): Use __gnu_dev_minor
instead of minor and __gnu_dev_major instead of major.
* sysdeps/unix/sysv/linux/device-nrs.h (DEV_TTY_P): Use
__gnu_dev_major instead of major.
* sysdeps/unix/sysv/linux/pathconf.c (distinguish_extX): Use
__gnu_dev_major instead of gnu_dev_major and __gnu_dev_minor
instead of gnu_dev_minor.
* sysdeps/unix/sysv/linux/ptsname.c (MASTER_P): Likewise.
(SLAVE_P): Likewise.
(__ptsname_internal): Use __gnu_dev_minor instead of minor.
* sysdeps/unix/sysv/linux/ttyname.h (is_pty): Use __gnu_dev_major
instead of major.
Bug 13575 reports that SSIZE_MAX is wrongly defined as LONG_MAX on
32-bit systems where ssize_t is defined as int (which is most 32-bit
systems supported by glibc).
This patch fixes the definition, using a conditional on
__WORDSIZE32_SIZE_ULONG to determine the appropriate type in the
32-bit case. Formally ssize_t need not be the signed type
corresponding to size_t, but as it is for all current glibc
configurations, there is no need for a new macro different from the
one used for defining SIZE_MAX. A testcase is added for both the type
and the value of SSIZE_MAX.
There is a relevant peculiarity in
sysdeps/unix/sysv/linux/s390/bits/typesizes.h:
/* Compatibility with g++ 2.95.x. */
/* size_t is unsigned long int on s390 -m31. */
This has the effect that for GCC 2 for s390, ssize_t does not match
__WORDSIZE32_SIZE_ULONG. I don't think such a conditional on the GCC
version makes sense - to have a well-defined ABI, the choices of
standard types should not depend on the GCC version. It's also the
case that upstream GCC 2.95 did not support s390, and glibc headers
don't in general try to support past development GCC versions - only
actual releases and current mainline development. But whether or not
that GCC 2 case should be removed (with or without a NEWS entry for
such a change), this patch does not result in any changes for s390;
the value is always still LONG_MAX in the s390 case because
__WORDSIZE32_SIZE_ULONG is always defined for 32-bit s390. I don't
think any such oddity in code only active for unofficial or unreleased
old compiler versions should block closing the present bug as fixed
once this patch is in.
Tested for x86_64 and x86, and with build-many-glibcs.py.
[BZ #13575]
* posix/bits/posix1_lim.h: Include <bits/wordsize.h>.
[!SSIZE_MAX && !(__WORDSIZE == 64 || __WORDSIZE32_SIZE_ULONG)]
(SSIZE_MAX): Define to INT_MAX.
* posix/test-ssize-max.c: New file.
* posix/Makefile (tests): Add test-ssize-max.
Bug 14553 reports that sys/types.h defines loff_t unconditionally,
despite it not being part of any supported standard. This is
permitted by the POSIX *_t reservation, but as a
quality-of-implementation issue it's still best not to define it
except for __USE_MISC. This patch conditions the definition
accordingly, updating a macro in sysdeps/unix/sysv/linux/sys/quota.h
to use __loff_t so it still works even if __USE_MISC is not defined.
codesearch.debian.net suggests there are quite a lot of loff_t uses
outside glibc, but it might well make sense to change all (few) uses
of loff_t or __loff_t inside glibc to use off64_t or __off64_t
instead, leaving only the definitions, treating this name as
obsolescent.
Tested for x86_64.
[BZ #14553]
* posix/sys/types.h (loff_t): Only define for [__USE_MISC].
* sysdeps/unix/sysv/linux/sys/quota.h (dqoff): Use __loff_t
instead of loff_t.
This patch increases timeouts on three tests I observed timing out on
slow systems.
* malloc/tst-malloc-tcache-leak.c (TIMEOUT): Define to 50.
* posix/tst-glob-tilde.c (TIMEOUT): Define to 200.
* resolv/tst-resolv-res_ninit.c (TIMEOUT): Define to 50.
Sync with gnulib 0e14f025d2.
Checked on x86_64-linux-gnu.
* lib/glob.c (glob): Use a 'char *', not a 'void *', in pointer
arithmetic.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Problem reported by Tim Rühsen [1]. Sync with gnulib 0e14f025d2.
[1] https://lists.gnu.org/archive/html/bug-gnulib/2017-10/msg00054.html
Checked on x86_64-linux-gnu.
* lib/glob.c (glob): Do not pass NULL to mempcpy.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The test posix/tst-glob_symlinks.c fails to build with GCC mainline:
tst-glob_symlinks.c: In function 'do_test':
tst-glob_symlinks.c:124:30: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=]
snprintf (buf, sizeof buf, "%s?", dangling_link);
^~~~~
tst-glob_symlinks.c:124:3: note: 'snprintf' output between 2 and 4097 bytes into a destination of size 4096
snprintf (buf, sizeof buf, "%s?", dangling_link);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tst-glob_symlinks.c:128:30: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=]
snprintf (buf, sizeof buf, "%s*", dangling_link);
^~~~~
tst-glob_symlinks.c:128:3: note: 'snprintf' output between 2 and 4097 bytes into a destination of size 4096
snprintf (buf, sizeof buf, "%s*", dangling_link);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This patch fixes the test to avoid such truncation warnings by
increasing the buffer in question by one byte, to ensure it can hold
any possible result of %s? or %s* formats where %s comes from a buffer
of size PATH_MAX.
Tested compilation with build-many-glibcs.py for aarch64-linux-gnu.
* posix/tst-glob_symlinks.c (do_test): Increase size of buf.
Three tests fail with a read-only source directory because they try to
write into the source directory. None of these write into it in a way
that should actually be problematic for concurrent builds sharing the
same writable source directory, but avoiding any writing into the
source directory (from testing, or from building glibc if the source
timestamps are properly ordered) is still a good idea, as being able
to build with read-only sources helps make sure there isn't anything
that could cause problems for concurrent builds.
This patch changes the tests in question to use either /tmp or the
build directory to write their temporary files (or to test O_TMPFILE,
as applicable).
Tested for x86_64.
* io/Makefile (tst-open-tmpfile-ARGS): New variable.
* posix/tst-mmap-offset.c (fname): Use /tmp.
* stdlib/tst-setcontext3.sh (tempfile): Use ${objpfx}.
These tests need a working Internet connection with DNS.
We have additional coverage of getaddrinfo through the resolv tests, so
the loss of default test coverage seems acceptable.
Hide internal __sched_setparam function to allow direct access within
libc.so and libc.a without using GOT nor PLT.
__GI___sched_setparam is defined when sysdeps/unix/syscalls.list is
used to generate sched_setparam. Otherwise libc_hidden_def is needed
explicitly.
[BZ #18822]
* include/sched.h (__sched_setparam): Add libc_hidden_proto.
* posix/sched_setp.c (__sched_setparam): Add libc_hidden_def.
Hide internal __posix_spawn_file_actions_realloc and /__spawni functions
to allow direct access within libc.so and libc.a without using GOT nor
PLT.
[BZ #18822]
* posix/spawn_int.h (__posix_spawn_file_actions_realloc): Add
attribute_hidden.
(__spawni): Likewise.
This patch follows commit 5554304f0 (posix: Allow glob to match dangling
symlinks [BZ #866]) by adding a compat symbol that follow previous
semantic of not following dangling symlinks and thus avoiding call
gl_lstat with GLOB_ALTDIRFUNC.
It avoids failure with old binaries that not set the alternate function
pointer for lstat (GNUmake for instance). The following scenario, for
instance, fails with current GNUmake because glibc will access unitialized
memory when calling gl_lstat:
$ cat src/t/t.c
int main ()
{
return 0;
}
$ cat Makefile
SRC = $(wildcard src/*/t.c)
OBJ = $(patsubst src/%.c, obj/%.o, $(SRC))
prog: $(OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) $(LIBS) $(OBJ) -o prog
obj/%.o: src/%.c
$(CC) $(CFLAGS) -c $< -o $@
$ make
This works as expected with the patch applied. Since it is for generic
ABI, default compat symbols are added with override for Linux due LFS.
Now we have two compat symbols for glob on Linux:
1. sysdeps/unix/sysv/linux/oldglob.c which implements glob64 with
the old dirent layout. For this implementation I also set it to
not follow dangling symlinks (which is the safest path).
2. sysdeps/unix/sysv/linux/glob{64}-lstat-compat.c which implements
the compat symbol for dangling symlinks. As for generic glob,
the implementation uses XSTAT_IS_XSTAT64 to define whether
both __glob_lstat_compat and __glob64_lstat_compat should be
different implementations. For archictures that define
XSTAT_IS_XSTAT64, __glob_lstat_compat is aliased to
__glob64_lstat_compat.
3. sysdeps/unix/sysv/linux/alpha/oldglob.c with a different glob_t
layout. As for 1. this patch changes it to not follow dangling
symlinks.
The patch also bumps _GNU_GLOB_INTERFACE_VERSION to 2 to advertise the
new semantic. On GNUmake, for instance, it will force to it use its
internal glob implementation instead and avoiding triggering the same
failure on builds against newer GLIBCs.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also checked
with a build against the major ABIs required to check for the abilist.
The changes should also work on gnulib (I run gnulib-tool.py check glob
and it shown no regressions).
[BZ #22183]
* include/gnu-versions.h (_GNU_GLOB_INTERFACE_VERSION): Increase
version to 2.
* posix/Makefile (routines): Add glob-lstat-compat and
glob64-lstat-compat.
* posix/Versions (GLIBC_2.27, glob, glob64): Add symbol version.
* posix/glob-lstat-compat.c: New file.
* posix/glob64-lstat-compat.c: Likewise.
* posix/tst-glob_lstat_compat.c: Likewise.
* sysdeps/unix/sysv/linux/glob-lstat-compat.c: Likewise.
* sysdeps/unix/sysv/linux/alpha/glob-lstat-compat.c: Likewise.
* sysdeps/unix/sysv/linux/glob64-lstat-compat.c: Likewise.
* sysdeps/unix/sysv/linux/alpha/glob.c: Remove file.
* posix/glob.c (glob_lstat): New function.
(glob): Rename to __glob and add versioned symbol to 2.27.
(glob_in_dir): Use glob_lstat.
* posix/glob64.c (glob64): Add GLOB_ATTRIBUTE.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/glob.c (glob): Add versioned symbol for
2.27.
* sysdeps/unix/sysv/linux/glob64.c (glob64): Likewise.
* sysdeps/unix/sysv/linux/oldglob.c (GLOB_NO_LSTAT): Define.
* sysdeps/unix/sysv/linux/alpha/oldglob.c (__old_glob): Do not use
gl_lstat on glob call.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Add GLIBC_2.27 glob
and glob64 symbols.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
This patch replaces the internal integer constant from
__glob_pattern_type return with a proper enum.
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
* posix/glob_internal.h (glob_pattern_type_t): New enumeration.
(__glob_pattern_type): Use __glob_pat_types.
* posix/glob_pattern_p.c (__glob_pattern_p): Likewise.
* posix/glob.c (glob): Likewise.
(glob_in_dir): Likewise.
Current glob implementation allows unlimited user name for home
directory construction on GLOB_TILDE case. To accomplish it glob
either construct a name on stack if size are small enough (based
on current alloca_used) or in heap otherwise.
This patch simplifies storage allocation by using the same scratch
buffer for both get_rlogin_r and getpwnam_r.
This also syncs with gnulib commit 064df0b (glob: fix bugs with long
login names).
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
* posix/glob.c (GET_LOGIN_NAME_MAX): Remove.
(glob): Use the same scratch buffer for both getlogin_r and
getpwnam_r. Don’t require preallocation of the login name. This
simplifies storage allocation, and corrects the handling of
long login names.
This patch fixes longstanding misuse of errno after getpwnam_r,
which returns an error number rather than setting errno. This is
sync with gnulib commit 5db9301.
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
[BZ #1062]
* posix/glob.c (glob): Port recent patches to platforms
lacking getpwnam_r.
(glob): Fix longstanding misuse of errno after getpwnam_r, which
returns an error number rather than setting errno.
This patch makes glob match dangling symlinks. Compared to other glob
implementation (*BSD, bash, musl, and other shells as well), GLIBC seems
the be the only one that does not match dangling symlinks. As for
comment #5 in BZ #866, POSIX does not have any strict specification for
dangling symlinks match and it is reasonable that trying to glob everything
in a path should return all types of files (such as for a 'rm *'). Also,
comment #7 shows even more example where GLIBC current behavior is
unexepected.
I avoided adding another GNU specific flag to set this behavior and
instead make it the default. Although this change the semanthic from
previous implementation, I think adding another compat symbol to be
really unecessary as from aforementioned reasons (current behavior not
defined in any standard, general idea of different implementation is
to list dangling symbols).
This also sync glob with gnulib commit fd1daf4 (glob: match dangling
symlinks).
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
[BZ #866]
[BZ #1062]
* posix/Makefile (tests): Remove bug-glob1 and tst-glob_symlinks.
* posix/bug-glob1.c: Remove file.
* posix/tst-glob_symlinks.c: New file.
* posix/glob.c (__lstat64): New macro.
(is_dir): New function.
(glob, glob_in_dir): Match symlinks even if they are dangling.
(link_stat, link_exists_p): Remove. All uses removed.
According to this kernel commit 2adc376c55194, d_ino 0 is a regular inode
number on Linux (which also matches POSIX, as it does not treat the value
as special). This patch makes glob accept is a valid inode number.
This is also a sync with gnulib commit c8e57c1.
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
[BZ #1062]
[BZ #19971]
* posix/glob.c (struct readdir_result): Remove skip_entry member.
(readdir_result_skip_entry, D_INO_TO_RESULT): Remove.
All uses removed.
This patch syncs posix/glob.c implementation with gnulib version
b5ec983 (glob: simplify symlink detection). The only difference
to gnulib code is
* DT_UNKNOWN, DT_DIR, and DT_LNK definition in the case there
were not already defined. Gnulib code which uses
HAVE_STRUCT_DIRENT_D_TYPE will redefine them wrongly because
GLIBC does not define HAVE_STRUCT_DIRENT_D_TYPE. Instead
the patch check for each definition instead.
Also, the patch requires additional globfree and globfree64 files
for compatibility version on some architectures. Also the code
simplification leads to not macro simplification (not need for
NO_GLOB_PATTERN_P anymore).
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
[BZ #1062]
* posix/Makefile (routines): Add globfree, globfree64, and
glob_pattern_p.
* posix/flexmember.h: New file.
* posix/glob_internal.h: Likewise.
* posix/glob_pattern_p.c: Likewise.
* posix/globfree.c: Likewise.
* posix/globfree64.c: Likewise.
* sysdeps/gnu/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/alpha/globfree.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/oldglob.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/globfree.c: Likewise.
* sysdeps/wordsize-64/globfree.c: Likewise.
* sysdeps/wordsize-64/globfree64.c: Likewise.
* posix/glob.c (HAVE_CONFIG_H): Use !_LIBC instead.
[NDEBUG): Remove comments.
(GLOB_ONLY_P, _AMIGA, VMS): Remove define.
(dirent_type): New type. Use uint_fast8_t not
uint8_t, as C99 does not require uint8_t.
(DT_UNKNOWN, DT_DIR, DT_LNK): New macros.
(struct readdir_result): Use dirent_type. Do not define skip_entry
unless it is needed; this saves a byte on platforms lacking d_ino.
(readdir_result_type, readdir_result_skip_entry):
New functions, replacing ...
(readdir_result_might_be_symlink, readdir_result_might_be_dir):
these functions, which were removed. This makes the callers
easier to read. All callers changed.
(D_INO_TO_RESULT): Now empty if there is no d_ino.
(size_add_wrapv, glob_use_alloca): New static functions.
(glob, glob_in_dir): Check for size_t overflow in several places,
and fix some size_t checks that were not quite right.
Remove old code using SHELL since Bash no longer
uses this.
(glob, prefix_array): Separate MS code better.
(glob_in_dir): Remove old Amiga and VMS code.
(globfree, __glob_pattern_type, __glob_pattern_p): Move to
separate files.
(glob_in_dir): Do not rely on undefined behavior in accessing
struct members beyond their bounds. Use a flexible array member
instead
(link_stat): Rename from link_exists2_p and return -1/0 instead of
0/1. Caller changed.
(glob): Fix memory leaks.
* posix/glob64 (globfree64): Move to separate file.
* sysdeps/gnu/glob64.c (NO_GLOB_PATTERN_P): Remove define.
(globfree64): Remove hidden alias.
* sysdeps/unix/sysv/linux/Makefile (sysdeps_routines): Add
oldglob.
* sysdeps/unix/sysv/linux/alpha/glob.c (__new_globfree): Move to
separate file.
* sysdeps/unix/sysv/linux/i386/glob64.c (NO_GLOB_PATTERN_P): Remove
define.
Move compat code to separate file.
* sysdeps/wordsize-64/glob.c (globfree): Move definitions to
separate file.
Mark internal nss symbols with attribute_hidden to allow direct access
within libc.so and libc.a without using GOT nor PLT.
Tested on x86-64 with and without --disable-nscd.
[BZ #18822]
* grp/initgroups.c (__nss_group_database): Removed.
(__nss_initgroups_database): Likewise.
* nscd/gai.c (__nss_hosts_database): Likewise.
* nss/XXX-lookup.c (DATABASE_NAME_SYMBOL): Likewise.
* posix/tst-rfc3484-2.c (__nss_hosts_database): Likewise.
* posix/tst-rfc3484-3.c (__nss_hosts_database): Likewise.
* posix/tst-rfc3484.c (__nss_hosts_database): Likewise.
* sysdeps/posix/getaddrinfo.c (__nss_hosts_database): Likewise.
* nss/getXXent.c (INTERNAL (REENTRANT_GETNAME)): Add
attribute_hidden.
* nss/nsswitch.c (__nss_database_custom): Define only if
USE_NSCD is defined.
(__nss_configure_lookup): Use __nss_database_custom only if
USE_NSCD is defined.
* nss/nsswitch.h (__nss_database_custom): Declare only if
USE_NSCD is defined. Add attribute_hidden.
(__nss_setent): Add attribute_hidden.
(__nss_endent): Likewise.
(__nss_getent_r): Likewise.
(__nss_getent): Likewise.
(DEFINE_DATABASE): Declare __nss_##arg##_database.
bits/types.h defines a type __qaddr_t that is not used anywhere in
glibc. It doesn't appear to be widely used outside glibc either
(judging by codesearch.debian.net, where hits are generally copies of
definitions of this type, not uses), so it seems appropriate to remove
this type, which this patch does.
Tested for x86_64.
* posix/bits/types.h (__qaddr_t): Remove.
posix/sched_cpucount.c assumes that size of __cpu_mask == size of long,
which is incorrect for x32. This patch uses __builtin_popcount, which
is availabe in GCC 4.9, in posix/sched_cpucount.c.
Tested on i686, x86-64 and x32 with multi-arch disabled.
[BZ #21696]
* posix/sched_cpucount.c: Don't include <limits.h>.
(__sched_cpucount): Use __builtin_popcount.
The wait3 function was removed in the 2001 edition of POSIX.
sys/wait.h wrongly declares it for the 2001 and 2008 editions of POSIX
when XSI features are enabled. This patch fixes the conditionals.
Tested for x86_64.
[BZ #21625]
* posix/sys/wait.h (strust rusage forward declaration): Change
[__USE_XOPEN_EXTENDED] conditional to [__USE_XOPEN_EXTENDED &&
!__USE_XOPEN2K].
(wait3): Likewise.
Some older standards (XPG4.2 through POSIX.1:2001, XSI only) require
sys/wait.h to include the definition of struct rusage. This is
missing in glibc.
This patch adds the required definition. struct rusage is moved to a
new header bits/types/struct_rusage.h to avoid bringing in the whole
of sys/resource.h (although the standards in question do allow the
whole of sys/resource.h to be brought in). In the five
bits/resource.h headers, the only variation between the definitions of
struct rusage is that the sysdeps/unix/sysv/linux version is prepared
for x32 (by having anonymous unions with __syscall_slong_t fields) and
the others are not. Thus, this version is suitable for use
generically (everything other than x32 simply has __syscall_slong_t
the same as long int, so there are no API or ABI changes involved, and
anonymous unions are already a required language feature for glibc
headers elsewhere), and this patch uses it as a base for the single
implementation of bits/types/struct_rusage.h.
Tested for x86_64, and with build-many-glibcs.py.
[BZ #21575]
* resource/bits/types/struct_rusage.h: New file.
* include/bits/types/struct_rusage.h: Likewise.
* bits/resource.h (struct rusage): Include
<bits/types/struct_rusage.h> instead of defining here.
* sysdeps/unix/sysv/linux/bits/resource.h (struct rusage):
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/resource.h (struct rusage):
Likewise.
* sysdeps/unix/sysv/linux/mips/bits/resource.h (struct rusage):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/resource.h (struct rusage):
Likewise.
* resource/Makefile (headers): Add bits/types/struct_rusage.h.
* posix/sys/wait.h [__USE_XOPEN_EXTENDED && !__USE_XOPEN2K8]:
Include <bits/types/struct_rusage.h>
bits/sched.h has logic to expose only an impl-namespace variant of
struct sched_param (i.e. struct __sched_param), but nothing uses it,
and the only header that includes bits/sched.h is sched.h. The
__need_schedparam logic can therefore be removed.
bits/sched.h also has a great deal of code relating to cpu_set_t
objects that was *almost* the same between the two versions of
bits/sched.h in the tree; a little spelunking indicated that this is
because some bug fixes got applied to the Linux-specific bits/sched.h
but not the generic one. Introduce a new header, bits/cpu-set.h,
containing the version of that code with the bugfixes, have sched.h
include it directly, and delete all of the code from both versions of
bits/sched.h.
Also remove the unnecessary name mangling in the definition of struct
sched_param -- POSIX specifies a field 'sched_priority', so there is
no reason to define it as '__sched_priority' and then paper over that
with a macro. (Just in case someone was using the internal name,
'sched_priority' remains a macro defined to expand to itself, and
'__sched_priority' now expands to 'sched_priority'.)
Finally, as long as I'm touching these files anyway, merge new
constants from linux/sched.h into the Linux bits/sched.h.
* bits/sched.h: Remove __need_schedparam logic and replace with a
normal multiple-include guard. Change field name in struct
sched_param from __sched_priority to sched_priority. Delete
everything under #ifndef __cpu_set_t_defined.
* sysdeps/unix/sysv/linux/bits/sched.h: Likewise. Also sync with
kernel sched.h, adding SCHED_ISO and SCHED_DEADLINE constants.
* posix/sched.h: Include bits/cpu-set.h as well as bits/sched.h.
For compatibility, #define sched_priority to itself, and #define
__sched_priority as sched_priority.
* posix/bits/cpu-set.h: New file containing, verbatim, the code
that was under #ifndef __cpu_set_t_defined in
sysdeps/unix/sysv/linux/bits/sched.h.
* include/bits/cpu-set.h: New wrapper.
* posix/Makefile: Install bits/cpu-set.h.
In sys/wait.h, waitid and associated constants and types are UX-shaded
in XPG4.2 (so not in XPG4), and XSI-shaded in POSIX before 2008, so
should be appropriately conditional in the headers. This patch fixes
the conditionals accordingly. (WCONTINUED is actually still
XSI-shaded in POSIX.1:2008, but W* is also reserved there without
XSI-shading, so nothing special needs to be done about the
conditionals on WCONTINUED to conform to POSIX.1:2008 namespace
rules.)
Tested for x86_64.
[BZ #21561]
* posix/sys/wait.h (idtype_t): Change [__USE_XOPEN] condition to
[__USE_XOPEN_EXTENDED].
(id_t): Likewise.
(include of <bits/types/siginfo_t.h): Likewise.
(waitid): Likewise.
* sysdeps/unix/sysv/linux/bits/waitflags.h (WSTOPPED): Condition
on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8].
(WEXITED): Likewise.
(WCONTINUED): Likewise.
(WNOWAIT): Likewise.
* conform/Makefile (test-xfail-XPG4/stdlib.h/conform): Remove.
(test-xfail-XPG4/sys/wait.h/conform): Likewise.
(test-xfail-POSIX/sys/wait.h/conform): Likewise.
sys/wait.h includes signal.h unconditionally. But the permission to
do so is UX-shaded in XPG4.2, and XSI-shaded in POSIX before 2008, so
this should not be unconditional. This patch fixes this
conservatively: the include is kept, but conditioned on the standards
that permit it (meaning it is still present by default, because
non-XSI POSIX.1:2008 is enabled by default). <bits/types.h> is now
included unconditionally to provide the required definition of
__pid_t; it was previously included via <signal.h>. Some standards
require pid_t to be defined here, and all allow it to be defined here;
previously defined via <signal.h>, it's now defined directly in this
header.
Tested for x86_64. This does not fix any of the sys/wait.h
conformtest failures, but substantially reduces the number of
namespace failures for sys/wait.h for XPG4 and POSIX.
[BZ #21560]
* posix/sys/wait.h: Condition include of <signal.h> on
[__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. Include <bits/types.h>
unconditionally.
[!__pid_t_defined] (pid_t): Define typedef.
The types affected are __sig_atomic_t, sig_atomic_t, __sigset_t,
sigset_t, sigval_t, sigevent_t, and siginfo_t. __sig_atomic_t is a
scalar, so it's now directly available from bits/types.h. The others
get bits/types/ headers.
Side effects include: There have been small changes to which
non-signal headers expose which subset of the signal-related types.
A couple of architectures' nested siginfo_t fields had to be renamed
to prevent undesired macro expansion. Internal code that wants to
manipulate signal masks must now include <sigsetops.h> (which is not
installed) and should be aware that __sigaddset, __sigandset,
__sigdelset, __sigemptyset, and __sigorset no longer return a value
(unlike the public API). Relatedly, the public signal.h no longer
declares any of those functions. The obsolete sigmask() macro no
longer has a system-specific definition -- in the cases where it
matters, it didn't work anyway.
New Linux architectures should create bits/siginfo-arch.h and/or
bits/siginfo-consts-arch.h to customize their siginfo_t, rather than
duplicating everything in bits/siginfo.h (which no longer exists).
Add new __SI_* macros if necessary. Ports to other operating systems
are strongly encouraged to generalize this scheme further.
* bits/sigevent-consts.h
* bits/siginfo-consts.h
* bits/types/__sigset_t.h
* bits/types/sigevent_t.h
* bits/types/siginfo_t.h
* sysdeps/unix/sysv/linux/bits/sigevent-consts.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts.h
* sysdeps/unix/sysv/linux/bits/types/__sigset_t.h
* sysdeps/unix/sysv/linux/bits/types/sigevent_t.h
* sysdeps/unix/sysv/linux/bits/types/siginfo_t.h:
New system-dependent bits headers.
* sysdeps/unix/sysv/linux/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h:
New Linux-only system-dependent bits headers.
* signal/bits/types/sig_atomic_t.h
* signal/bits/types/sigset_t.h
* signal/bits/types/sigval_t.h:
New non-system-dependent bits headers.
* sysdeps/generic/sigsetops.h
* sysdeps/unix/sysv/linux/sigsetops.h:
New internal headers.
* include/bits/types/sig_atomic_t.h
* include/bits/types/sigset_t.h
* include/bits/types/sigval_t.h:
New wrappers.
* signal/sigsetops.h
* bits/siginfo.h
* bits/sigset.h
* sysdeps/unix/sysv/linux/bits/siginfo.h
* sysdeps/unix/sysv/linux/bits/sigset.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo.h
* sysdeps/unix/sysv/linux/s390/bits/siginfo.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo.h:
Deleted.
* signal/Makefile, sysdeps/unix/sysv/linux/Makefile:
Update lists of installed headers.
* posix/bits/types.h: Define __sig_atomic_t here.
* signal/signal.h: Use the new bits headers; no need to handle
__need_sig_atomic_t nor __need_sigset_t. Don't use __sigmask
to define sigmask.
* include/signal.h: No need to handle __need_sig_atomic_t
nor __need_sigset_t. Don't define __sigemptyset.
* io/sys/poll.h, setjmp/setjmp.h
* sysdeps/arm/sys/ucontext.h, sysdeps/generic/sys/ucontext.h
* sysdeps/i386/sys/ucontext.h, sysdeps/m68k/sys/ucontext.h
* sysdeps/mach/hurd/i386/bits/sigcontext.h
* sysdeps/mips/sys/ucontext.h, sysdeps/powerpc/novmxsetjmp.h
* sysdeps/pthread/bits/sigthread.h
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h:
Use bits/types/__sigset_t.h.
* misc/sys/select.h, posix/spawn.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/sys/epoll.h
* sysdeps/unix/sysv/linux/sys/signalfd.h:
Use bits/types/sigset_t.h.
* resolv/netdb.h, rt/mqueue.h: Use bits/types/sigevent_t.h.
* rt/aio.h: Use bits/types/sigevent_t.h and bits/sigevent-consts.h.
* socket/sys/socket.h: Don't include bits/sigset.h.
* login/utmp_file.c, shadow/lckpwdf.c, signal/sigandset.c
* signal/sigisempty.c, stdlib/abort.c, sysdeps/posix/profil.c
* sysdeps/posix/sigignore.c, sysdeps/posix/sigintr.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c
* sysdeps/posix/sprofil.c, sysdeps/posix/sysv_signal.c
* sysdeps/unix/sysv/linux/nptl-signals.h:
Include sigsetops.h.
* signal/sigaddset.c, signal/sigandset.c, signal/sigdelset.c
* signal/sigorset.c, stdlib/abort.c, sysdeps/posix/sigignore.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c:
__sigaddset, __sigandset, __sigdelset, __sigemptyset, __sigorset
now return no value.
* signal/sigaddset.c, signal/sigdelset.c, signal/sigismem.c
Include <errno.h>, <signal.h>, and <sigsetops.h> instead of
"sigsetops.h".
* signal/sigsetops.c: Explicitly define __sigismember,
__sigaddset, and __sigdelset as compatibility symbols.
* signal/Versions: Correct commentary on __sigpause,
__sigaddset, __sigdelset, __sigismember.
* inet/rcmd.c: Include sigsetops.h. Convert old code using
__sigblock/__sigsetmask to use __sigprocmask and friends.
This patch consolidates the nanosleep Linux syscall generation on
sysdeps/unix/sysv/linux/nanosleep.c. It basically removes it from
architectures auto-generation list.
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* nptl/Makefile (CFLAGS-nanosleep.c): New rule.
* posix/Makefile (CFLAGS-nanosleep.c): Likewise.
* sysdeps/unix/sysv/linux/nanosleep.c: New file.
* sysdeps/unix/sysv/linux/syscalls.list: Remove nanosleep from
auto-generated list.
This patch consolidates the pause Linux implementation on
sysdeps/unix/sysv/linux/pause.c. If defined the pause syscall
(__NR_pause) will be used, other ppoll with 0 arguments will be
used instead.
It has the small advantage of generic pause implementation with
uses rt_sigprocmask plus rt_sigsuspend because it requires only
one syscall and the pause is done atomically regarding signal
handling (for instance, pause may not be interrupted if the
signal arrives between the rt_sigprocmask and rt_sigsuspend
syscall).
Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32,
arch64-linux-gnu, arm-linux-gnueabihf, powerpc64le-linux-gnu,
sparc64-linux-gnu, and sparcv9-linux-gnu.
* sysdeps/unix/sysv/linux/generic/pause.c: Remove file.
* sysdeps/unix/sysv/linux/sparc/sparc64/pause.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h [__arch64__]
(__NR_pause): Undefine.
* sysdeps/unix/sysv/linux/pause.c: New file.
* sysdeps/unix/sysv/linux/syscalls.list: Remove pause from
auto-generation list.
This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.
There are still quite a few tests that need to see internal gunk of
one variety or another. For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'. There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.
There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all. (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.) When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.
The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change. They should be
relatively self-explanatory. In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.
* Makerules: New subdir configuration variables 'tests-internal'
and 'test-internal-extras'. Test files in these categories will
still be compiled with MODULE_NAME=nonlib. Test files in the
existing categories (tests, xtests, test-srcs, test-extras) are
now compiled with MODULE_NAME=testsuite.
New subdir configuration variable 'modules-names-tests'. Files
which are in both 'modules-names' and 'modules-names-tests' will
be compiled with MODULE_NAME=testsuite instead of
MODULE_NAME=extramodules.
(gen-as-const-headers): Move to tests-internal.
(do-tests-clean, common-mostlyclean): Support tests-internal.
* Makeconfig (built-modules): Add testsuite.
* Makefile: Change libof-check-installed-headers-c and
libof-check-installed-headers-cxx to 'testsuite'.
* Rules: Likewise. Support tests-internal.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
Remove extra-modules.mk.
* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
very top of the file and rationalize their order.
If MODULE_NAME is not defined at all, define IS_IN to always be
false, and don't define _ISOMAC.
If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
true, define _ISOMAC and suppress everything else in this file,
starting with the inclusion of config.h.
Do check for inappropriate definitions of __OPTIMIZE__ and
__FAST_MATH__ here, but only if _ISOMAC is not defined.
Correct some out-of-date commentary.
* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
and _Mlong_double_ before including math.h.
* include/string.h: If _ISOMAC is defined, don't expose
_STRING_ARCH_unaligned. Move a comment to a more appropriate
location.
* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
* include/time.h, include/unistd.h, include/wchar.h: No need to
check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.
* misc/sys/cdefs.h (__NTHNL): New macro.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
(__m81_defun): Use __NTHNL to avoid errors with GCC 6.
* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
defined, for HAVE_TUNABLES.
* inet/tst-checks-posix.c: No need to define _ISOMAC.
* intl/tst-gettext2.c: Provide own definition of N_.
* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
* math/test-signgam-main.c: No need to define _ISOMAC.
* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
* stdlib/tst-strtod1i.c: ...this new file.
* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
Split tests of __strtod_internal to...
* stdlib/tst-strtod5i.c: ...this new file.
* string/test-string.h: Include stdint.h. Duplicate definition of
inhibit_loop_to_libcall here (from libc-symbols.h).
* string/test-strstr.c: Provide dummy definition of
libc_hidden_builtin_def when including strstr.c.
* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
unload, unload2, circleload1, neededtest, neededtest2,
neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
tst-stackguard1, tst-_dl_addr_inside_object, and all of the
ifunc tests to tests-internal.
Don't add $(modules-names) to test-extras.
* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
Add tst-deadline to tests-static-internal.
* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
tests-internal.
* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
tst-sem12-static, and tst-stackguard1-static to tests-internal.
Link tests-internal with libpthread also.
Don't add $(modules-names) to test-extras.
* nss/Makefile: Move tst-field to tests-internal.
* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
tests-internal.
* sunrpc/Makefile: Move tst-svc_register to tests-internal.
* sysdeps/powerpc/Makefile: Move test-get_hwcap and
test-get_hwcap-static to tests-internal.
* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
tests-internal.
* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
modules-names-tests.
This patch removes all the replicated pthread definition accross the
architectures and consolidates it on shared headers. The new
organization is as follow:
* Architecture specific definition (such as pthread types sizes) are
place in the new pthreadtypes-arch.h header in arch specific path.
* All shared structure definition are moved to a common NPTL header
at sysdeps/nptl/bits/pthreadtypes.h (with now includes the arch
specific one for internal definitions).
* Also, for C11 future thread support, both mutex and condition
definition are placed in a common header at
sysdeps/nptl/bits/thread-shared-types.h.
It is also a refactor patch without expected functional changes.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu,
m68k-linux-gnu, microblaze-linux-gnu, mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
tile{pro,gx}-linux-gnu, and x86_64-linux-gnu).
* posix/Makefile (headers): Add pthreadtypes-arch.h and
thread-shared-types.h.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h: New file: arch
specific thread definition.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/nptl/bits/thread-shared-types.h: New file: shared
thread definition between POSIX and C11.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h.: Remove file.
* sysdeps/alpha/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/nptl/bits/pthreadtypes.h: New file: common thread
definitions shared across all architectures.
Otherwise, another user might recreate these files after the first
deletion. Particularly with temporary directories, this could result
in the removal of unintended files through symbol link attacks.
conform/ namespace tests of arpa/inet.h, netdb.h and netinet/in.h fail
for UNIX98 and XPG42 because of inclusion of stdint.h, which defines
macros not permitted in those headers for those standards. UNIX98
allows them to include inttypes.h, but (predating C99) has restricted
inttypes.h contents (not yet tested in the conform/ tests) not
including those macros; XPG4.2 has no such permission and no
inttypes.h / stdint.h at all.
This patch rearranges the headers to avoid this issue. intN_t
definitions move to bits/stdint-intn.h, and uintN_t definitions to
bits/stdint-uintn.h. (These are not bits/types/ headers because they
each define four types. They are separate rather than just a single
header because sys/types.h defines intN_t but u_intN_t rather than
uintN_t - and while sys/types.h could define uintN_t because of the
POSIX reservation of *_t, existing practice there is largely to
condition types on appropriate feature test macros, and indeed there
is at least one open bug report (14553) about a type that's not
so-conditioned, so maybe types there should actually have conditions
added where appropriate.) The affected network headers are then made
to include bits/stdint-uintn.h instead of stdint.h. This allows six
XFAILs to be removed.
This doesn't do anything about inttypes.h defining more than it should
for UNIX98, but we don't have conformtest expectations for that case
at present (and my inclination is that a fix for that should be as
local as possible - affecting only inttypes.h, not stdint.h, only for
the case of __USE_UNIX98 && !__USE_ISOC99).
Tested for x86_64.
[BZ #21455]
* bits/stdint-intn.h: New file.
* bits/stdint-uintn.h: Likewise.
* stdlib/Makefile (headers): Add bits/stdint-intn.h and
bits/stdint-uintn.h.
* inet/netinet/in.h: Include <bits/stdint-uintn.h> instead of
<stdint.h>.
* posix/sys/types.h: Include <bits/stdint-intn.h>.
(__int8_t_defined): Do not define here.
(int8_t): Likewise.
(int16_t): Likewise.
(int32_t): Likewise.
(int64_t): Likewise.
[__GNUC_PREREQ (2, 7)] (__intN_t): Likewise.
* resolv/netdb.h: Include <bits/stdint-uintn.h> instead of
<stdint.h>.
* include/netdb.h [_ISOMAC]: Do not include <stdint.h>.
* sysdeps/generic/stdint.h: Include <bits/stdint-intn.h> and
<bits/stdint-uintn.h>.
(int8_t): Do not define here.
(int16_t): Likewise.
(int32_t): Likewise.
(int64_t): Likewise.
(uint8_t): Likewise.
(uint16_t): Likewise.
(uint32_t): Likewise.
(uint64_t): Likewise.
* conform/Makefile (test-xfail-XPG42/arpa/inet.h/conform): Remove
variable.
(test-xfail-XPG42/netdb.h/conform): Likewise.
(test-xfail-XPG42/netinet/in.h/conform): Likewise.
(test-xfail-UNIX98/arpa/inet.h/conform): Likewise.
(test-xfail-UNIX98/netdb.h/conform): Likewise.
(test-xfail-UNIX98/netinet/in.h/conform): Likewise.
sys/socket.h includes sys/uio.h to get the definition of the iovec
structure.
POSIX allows sys/socket.h to make all sys/uio.h symbols visible.
However, all of sys/uio.h is XSI-shaded, so for non-XSI POSIX this
results in conformtest failures (for sys/socket.h and other headers
that include it):
Namespace violation: "UIO_MAXIOV"
Namespace violation: "readv"
Namespace violation: "writev"
Now, there is some ambiguity in POSIX about what namespace
reservations apply in this case - see
http://austingroupbugs.net/view.php?id=1127 - but glibc convention
would still avoid declaring readv and writev, for example, for feature
test macros that don't include them (if only headers from the relevant
standard are included), even if such declarations are permitted, so
there is a bug here according to glibc conventions.
This patch moves the struct iovec definition to a new
bits/types/struct_iovec.h header and includes that from sys/socket.h
instead of including the whole of sys/uio.h. This fixes the namespace
issue; however, three files in glibc that were relying on the implicit
inclusion needed to be updated to include sys/uio.h explicitly. So
there is a question of whether sys/socket.h should continue to include
sys/uio.h under some conditions, such as __USE_XOPEN or __USE_MISC or
__USE_XOPEN || __USE_MISC, for greater compatibility with code that
(wrongly) expects this optional inclusion to be present there. (I
think the three affected files in glibc should still have explicit
sys/uio.h inclusions added in any case, however.)
Tested for x86_64.
[BZ #21426]
* misc/bits/types/struct_iovec.h: New file.
* misc/Makefile (headers): Add bits/types/struct_iovec.h.
* include/bits/types/struct_iovec.h: New file.
* bits/uio.h (struct iovec): Replace by inclusion of
<bits/types/struct_iovec.h>.
* sysdeps/unix/sysv/linux/bits/uio.h (struct iovec): Likewise.
* socket/sys/socket.h: Include <bits/types/struct_iovec.h> instead
of <sys/uio.h>.
* nptl/tst-cancel4.c: Include <sys/uio.h>
* posix/test-errno.c: Likewise.
* support/resolv_test.c: Likewise.
* conform/Makefile (test-xfail-POSIX2008/arpa/inet.h/conform):
Remove.
(test-xfail-POSIX2008/netdb.h/conform): Likewise.
(test-xfail-POSIX2008/netinet/in.h/conform): Likewise.
(test-xfail-POSIX2008/sys/socket.h/conform): Likewise.
This patch adds support for the POSIX_SPAWN_SETSID flag.
It was recently accepted by the Austin Group:
http://austingroupbugs.net/view.php?id=1044
Checked on x86_64
Daurnimator <quae@daurnimator.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
[BZ #21340]
* posix/Makefile (tests): Add tst-posix_spawn-setsid to list of tests.
* posix/spawn.h: define POSIX_SPAWN_SETSID flag.
* posix/spawnattr_setflags.c (ALL_FLAGS): Add POSIX_SPAWN_SETSID to
valid flags.
* posix/tst-posix_spawn-setsid.c: Add test for POSIX_SPAWN_SETSID.
* sysdeps/mach/hurd/spawni.c (__spawni): Implementation of
POSIX_SPAWN_SETSID.
* sysdeps/posix/spawni.c (__spawni): Likewise.
* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Likewise.
* NEWS: Add note about POSIX_SPAWN_SETSID support.
This patch consolidates all Linux mmap implementations on default
sysdeps/unix/sysv/linux/mmap{64}.c one. To accomodate all required
architecture specific requeriments a new internal header is created
(mmap_internal.h) where each architecture add its specific code
requirements. Currently only x86_64 (to define MMAP_PREPARE to add
MAP_32BITS), s390 (which have a different kernel ABI for mmap), m68k
(which have variable minimum page sizes), and MIPS n32 (which zero
extend the offset to handle negative one correctly) redefine the new
header.
The patch also fixes BZ#21270 where default mmap64 on architectures
which uses mmap2 silent truncates large offsets value (larger than
1 << (page shift + 8 * sizeof (off_t)) or 1<<44 on architectures with
4096 bytes page size). The new consolidate implementation returns
EINVAL as allowed by POSIX.
It also adds a tests for on current tst-mmap-offset one. I have run
a full make check on x86_64, x86_64-32, i686, aarch64, armhf, powerpc,
powerpc64le, sparc64, and sparcv9 without any regressions. I also ran
some basic tests (tst-mmap-offset) on sh4, m68k, and on qemu simulated
MIPS32 and MIPS64.
[BZ #21270]
* posix/tst-mmap-offset.c (do_prepare): New function.
(do_test): Rename to do_test_bz18877 and use FAIL_RET.
(do_test_bz21270): New function.
* sysdeps/unix/sysv/linux/aarch64/mmap.c: Remove file.
* sysdeps/unix/sysv/linux/arm/mmap.c: Remove file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/mmap.c: Likewise.
* sysdeps/unix/sysv/linux/hppa/mmap.c: Likewise.
* sysdeps/unix/sysv/linux/i386/mmap.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/mmap.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/mmap64.c: Likewise.
* sysdeps/unix/sysv/linux/microblaze/mmap.S: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/mmap.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/mmap.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/mmap64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/mmap.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/mmap64.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/mmap.S: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/mmap.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/mmap64.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/mmap.c: Likewise.
* sysdeps/unix/sysv/linux/mmap_internal.h: New file.
* sysdeps/unix/sysv/linux/m68k/mmap_internal.h: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/mmap_internal.h: Likewise.
* sysdeps/unix/sysv/linux/s390/mmap_internal.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/mmap_internal.h: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/syscalls.list: Remove mmap
from auto-generation list.
* sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/mmap.c: New file.
* sysdeps/unix/sysv/linux/mmap64.c (__mmap64): Add check for invalid
offsets and support for mmap2 syscall.
This patch prevents lingering files for SIGSEGV failures by adding
a cleanup handler on trap handler. Checked on x86_64-linux-gnu.
* posix/globtest.sh: Add cleanup routine on trap 0.
As the final act in this patchset, adjust the "This file is part of
the GNU C Library" message at the top of each file to indicate which
files are synced with gnulib.
* posix/bits/getopt_core.h, posix/bits/getopt_ext.h
* posix/getopt.c, posix/getopt1.c, posix/getopt_int.h:
Mention in top-of-file boilerplate that these files are shared
with gnulib.
* posix/getopt.h, posix/bits/getopt_posix.h:
Mention in top-of-file boilerplate that these files are NOT shared
with gnulib, unlike the rest of the getopt implementation.
__need_getopt is misnamed; what it really means is "we want only the
getopt features specified in POSIX, not the GNU extensions". Because
this code is shared with gnulib, it winds up being cleanest to split
getopt.h into *four* headers. getopt_core.h and getopt_ext.h will
be shared with gnulib, getopt_posix.h will be just for glibc, and
each project will have its own copy of getopt.h.
* posix/bits/getopt_core.h, posix/bits/getopt_ext.h:
New files, intended to be shared with gnulib.
* posix/bits/getopt_posix.h:
New file, not intended to be shared with gnulib.
* posix/getopt.h: Now just includes features.h,
bits/getopt_core.h, and bits/getopt_ext.h. Will
no longer be shared with gnulib.
* include/bits/getopt_core.h, include/bits/getopt_ext.h
* include/bits/getopt_posix.h: New wrappers.
* posix/Makefile: Install new headers.
* posix/unistd.h, libio/stdio.h:
Include bits/getopt_posix.h instead of getopt.h.
gnulib now has annotations on at least some functions to cater to
compilation with -Wunused-parameter. In order to follow suit cleanly,
I've added to libc-symbols.h some of the _GL_* macros that
gnulib-common.m4 puts into config.h. (I don't think they belong in
sys/cdefs.h, at least not without further thought.)
At this point all gnulib-side changes to getopt.c have been merged.
* include/libc-symbols.h: For gnulib compatibility, define
_GL_UNUSED, _GL_UNUSED_LABEL, _GL_ATTRIBUTE_PURE, and
_GL_ATTRIBUTE_CONST.
* posix/getopt.c (_getopt_initialize): Mark argc and argv
parameters with _GL_UNUSED.
In one place, glibc's getopt uses alloca to construct a linked list of
possibilities for an "ambiguous" long option. In gnulib, malloc
should be used instead. Providing for both cases complicates things a
fair bit. Instead of merging straight across, therefore, I have
chosen to rewrite it using a boolean vector instead of a linked list.
There is then only one allocation that might need freeing; in glibc it
can honor __libc_use_alloca as usual, and in gnulib we define
__libc_use_alloca to always be false, so we don't need ifdefs in the
middle of the function. This should also be slightly more efficient
in the normal case of long options being fully spelled out -- I think
most people aren't even aware they _can_ sometimes abbreviate long
options.
One interesting consequence is that the list of possibilities is now
printed in exactly the order they appear in the list of long options,
instead of the first possibility being shuffled to the end. This
shouldn't be a big deal but it did break one test that relied on the
exact text of this error message.
(The reason the previous patch was "in aid of" merging from gnulib is
I didn't want to have to make this change in two places.)
(The patch looks bigger than it really is because there's a fair bit
of reindentation and code rearrangement.)
* posix/getopt.c: When used standalone, define __libc_use_alloca
as always false and alloca to abort if called.
(process_long_option): Rewrite handling of ambiguous long options
to use a single boolean vector, not a linked list; use
__libc_use_alloca to decide whether to allocate this using alloca.
* posix/tst-getopt_long1.c: Adjust text of expected error message.
There were two copies of the bulk of the code to handle long options.
Now there is only one. (Yes, this is in aid of merging from gnulib.)
The change to bug-getopt4.c clarifies the error messages when the test
fails.
* posix/getopt.c (process_long_option): New function split out
from _getopt_internal_r.
(_getopt_internal_r): Replace both copies of the long-option
processing code with calls to process_long_option.
* posix/bug-getopt4.c (one_test): Print argv[0] in error messages.
(do_test): Differentiate argv[0] in the two subtests.
_getopt_data.__posixly_correct is completely redundant to
_getopt_data.__ordering, and some work that logically belongs in
_getopt_initialize was being done by _getopt_internal_r, making the
code harder to understand.
As a side effect, getenv will no longer be called if the first
character of the options string is '+' or '-', which is probably a
Good Thing. (Perhaps we should have a flag character that
specifically asks for the permutation behavior?)
* posix/getopt_int.h (_getopt_data): Remove __posixly_correct field.
* posix/getopt.c (_getopt_internal_r): Move some initialization code...
(_getopt_initialize): ...here. Don't set d->__posixly_correct.
For standards compliance, getopt, getopt_long, and getopt_long_only in
glibc have to take 'char *const *argv' even though they can mutate the
array. gnulib has tried to clean this up as much as possible: all the
internal functions use 'char **argv', and when used standalone, so do
getopt_long and getopt_long_only.
Also brought over are __nonnull annotations, corrections to documentation,
and apparently it is no longer necessary to worry about conflicting
prototypes for getopt. The macroification of the definitions of
getopt and __posix_getopt goes beyond what is currently in gnulib.
At this point getopt1.c and getopt_int.h are identical to their gnulib
versions.
* posix/getopt.h: Add backup definition of __nonnull for
consistency with gnulib. Define __getopt_argv_const to const
if not already defined.
(getopt): Update doc comment from gnulib. Prototype
unconditionally. Add __nonnull annotation.
(__posix_getopt): Add __nonnull annotation.
(getopt_long, getopt_long_only): Use __getopt_argv_const in
prototypes for consistency with gnulib. Add __nonnull
annotations.
* posix/getopt.c (_getopt_initialize, _getopt_internal_r)
(getopt_internal): Change 'argv' argument to type 'char **'.
Remove now-unnecessary casts.
(getopt, __posix_getopt): Eliminate repetition with a macro.
Cast 'argv' to 'char **' when calling _getopt_internal.
* posix/getopt1.c (getopt_long, getopt_long_only):
Use __getopt_argv_const for consistency with gnulib.
Cast 'argv' to 'char **' when calling _getopt_internal.
(_getopt_long_r, _getopt_long_only_r):
Change 'argv' argument to type 'char **'.
(main): Constify 'long_options'.
* posix/getopt_int.h (getopt_internal, _getopt_internal_r)
(_getopt_long_r, _getopt_long_only_r):
Change 'argv' argument to type 'char **'.
getopt can print a whole bunch of error messages, and when used
standalone (from gnulib) it uses fprintf to do that. But fprintf is a
cancellation point and getopt isn't, and also applying fprintf to a
stream in wide-character mode is not allowed.
glibc has an internal function called __fxprintf that writes a narrow
format string to a stream regardless of mode, but it only handles
ASCII format strings, and it's still a cancellation point. getopt's
messages are translated, so they might not be ASCII. So getopt has an
error message to an asprintf buffer, monkeys with internal flag bits
on stderr to disable cancellation, and then calls
__fxprintf(stderr, "%s", buffer). There isn't even a helper function,
the code is duplicated every time.
This patch fixes __fxprintf to handle arbitrary multibyte format
strings, and adds a variant __fxprintf_nocancel that does the same
thing but also isn't a cancellation point. (It still _works_ by
monkeying with internal flag bits on the FILE, but that's not really a
layering violation for code in stdio-common.) All of the #ifdef _LIBC
blocks can then be reduced to their standalone versions with a little
help from some macros at the top of the file.
I also wrote a test case to verify that getopt really isn't a
cancellation point, and I'm glad I did, because it found two bugs, one
of which wasn't even to do with cancellation (see previous patch).
* stdio-common/fxprintf.c (__fxprintf_nocancel): New function.
(locked_vfxprintf): New helper function. Handle arbitrary
multibyte strings, not just ASCII.
* include/stdio.h: Declare __fxprintf_nocancel.
* posix/getopt.c: When _LIBC is defined, define fprintf to
__fxprintf_nocancel, flockfile to _IO_flockfile, and
funlockfile to _IO_funlockfile. When neither _LIBC nor
_POSIX_THREAD_SAFE_FUNCTIONS is defined, define flockfile and
funlockfile as no-ops. (_getopt_internal_r): Remove all
internal #ifdef _LIBC blocks; the standalone error-printing
code can now be used for libc as well. Add an
flockfile/funlockfile pair around one case where the error
message is printed in several chunks. Don't use fputc.
* posix/tst-getopt-cancel.c: New test.
* posix/Makefile: Run it.
getopt_long contains an undocumented (AFAICT) feature in which, if you
put "W;" in the short-options list, then '-W foo' and '-Wfoo' are
treated as equivalent to '--foo'. This is implemented with a partial
second copy of the code for handling long options, and that code
increments optind one too many times when recovering from an ambiguous
abbreviated option, which can cause the main loop to walk past the end
of argv and crash.
I discovered this while writing a test case that tries to exercise all
of getopt's error reporting paths; I wouldn't be surprised to learn
that this feature is never used by real applications.
* posix/getopt.c (_getopt_internal_r): Don't increment
d->optind a second time when reporting ambiguous -W options.
This covers changes with little or no consequences when the code is
used in glibc.
* posix/getopt_int.h: Include getopt.h.
Use impl-namespace names for all arguments to _getopt_internal and
_getopt_internal_r.
Declare __ordering enum outside the struct.
Harmonize comments with gnulib.
* posix/getopt1.c: Simplify #ifdeffage at top of file. Remove
ELIDE_CODE logic entirely. Move inclusion of stdlib.h to
#ifdef TEST block and make unconditional. Do not define NULL.
* posix/getopt.c: Partial merge from gnulib, covering the
initial includes and global declarations, commentary, and
a couple of semantically-neutral code changes.
I'm not sure whether this is official GNU style now, but `...' quotes
haven't looked properly balanced in most people's terminal fonts since
2001ish? and gnulib has chosen to switch over to '...' quotes.
I'm merging this separately from the other changes in gnulib because
it's very mechanical.
* posix/getopt.c, posix/getopt.h, posix/getopt1.c, posix/getopt_int.h:
Use '...' instead of `...' for quotation marks inside
comments and strings.
glibc's implementation of getopt includes code to parse an environment
variable named _XXX_GNU_nonoption_argv_flags_ (where XXX is the
current process's PID in decimal); but all of it has been #ifdefed out
since 2001, with no official way to turn it back on.
According to commentary in our config.h.in, bash version 2.0 set this
environment variable to indicate argv elements that were the result of
glob expansion and therefore should not be treated as options, but the
feature was "disabled later" because "it caused problems". According
to bash's CHANGES file, "later" was release 2.01; it gives no more
detail about what the problems were.
Version 2.0 of bash was released on the last day of 1996, and version
2.01 in June of 1997. Twenty years later, I think it is safe to
assume that this environment variable isn't coming back.
* config.h.in (USE_NONOPTION_FLAGS): Remove.
* csu/init-first.c: Remove all #ifdef USE_NONOPTION_FLAGS blocks.
* sysdeps/mach/hurd/i386/init-first.c: Likewise.
* posix/getopt_int.h: Likewise.
* posix/getopt.c: Likewise. Also remove SWAP_FLAGS and the
__libc_argc and __libc_argv externs, which were only used by
#ifdef USE_NONOPTION_FLAGS blocks.
* posix/getopt_init.c: Remove file.
* posix/Makefile (routines): Remove getopt_init.
* include/getopt.h: Don't declare __getopt_initialize_environment.
* manual/getopt.texi: Remove mention of USE_NONOPTION_FLAGS in
a comment.
This patch fixes multiple issues of test-errno.c (9a56f87183):
- Rename Linux test-errno.c to test-errno-linux.c to avoid build
the same source for both tests.
- Add a mlock check for 32 bits build running on 64 bits kernels.
Althuough man pages states that mlock fails with EINVAL if final
address overflows, kernels does not return it for aforementioned
condition (it returns ENOMEM instead). Although it seems to be
a kernel issue for compat syscall handling, I think it is worth
to still check syscall return and document the behavior.
- Initialize option lenght for setsockopt check.
- Change open test from EINVAL to EISDIR.
Checked on x86_64-linux-gnu and i686-linux-gnu (running on 64 bits
kernel).
* posix/test-errno.c (do_test): Initialize setsockopt optlen.
* sysdeps/unix/sysv/linux/test-errno.c: Move to ...
* sysdeps/unix/sysv/linux/test-errno-linux.c: ... here.
(test_wrp_rv): Fix format.
(test_wrp_rv2): New macro.
(do_test): Handle mlock return on 64 bits kernels with 32 bits
binaries.
calls with constant strings shows a small (~10%) performance gain, strdup is
typically used in error reporting code, so not performance critical.
Remove the now unused __need_malloc_and_calloc related defines from stdlib.h.
Rename existing uses of str(n)dup to __str(n)dup so it no longer needs to be
redirected to a builtin. Also building GLIBC with -Os now no longer shows
localplt or linkname space failures (partial fix for BZ #15105 and BZ #19463).
[BZ #15105]
[BZ #19463]
* elf/dl-cache.c (_dl_load_cache_lookup): Use __strdup.
* inet/rcmd.c (rcmd_af): Likewise.
* inet/rexec.c (rexec_af): Likewise.
* intl/dcigettext.c (_LIBC): Likewise.
* intl/finddomain.c (_nl_find_domain): Use strdup expansion.
* locale/loadarchive.c (_nl_load_locale_from_archive): Use __strdup.
* locale/setlocale.c (setlocale): Likewise.
* posix/spawn_faction_addopen.c
(posix_spawn_file_actions_addopen): Likewise.
* stdlib/putenv.c (putenv): Use __strndup.
* sunrpc/svc_simple.c (__registerrpc): Use __strdup.
* sysdeps/posix/getaddrinfo.c (gaih_inet): Use __strdup/__strndup.
* include/stdlib.h (__need_malloc_and_calloc): Remove uses.
(__Need_M_And_C) Remove define/undef.
* stdlib/stdlib.h (__need_malloc_and_calloc): Remove uses.
(__malloc_and_calloc_defined): Remove define.
* string/bits/string2.h (__strdup): Remove define.
(strdup): Likewise.
(__strndup): Likewise.
(strndup): Likewise.
This patch adds tests for POSIX and Linux specific syscalls
that implemented with syscall templates machinery. The reason
of tests is to receive the expected error code and test if
it's handled properly by glibc.
2017-03-08 Yury Norov <ynorov@caviumnetworks.com>
Zack Weinberg <zackw@panix.com>
* posix/test-errno.c: New file.
* posix/Makefile (tests): Add test-errno.
* sysdeps/unix/sysv/linux/test-errno.c: New file.
* sysdeps/unix/sysv/linux/Makefile (tests): Add test-errno.
