The majority of grp routines are entry points for nss functionality.
This commit removes the 'grp' subdirectory and moves all nss-relevant
functionality and all tests to 'nss', and the 'setgroups' stub into
'posix' (alongside the 'getgroups' stub). References to grp/ are
accordingly changed. In addition, compat-initgroups.c, a fallback
implementation of initgroups is renamed to initgroups-fallback.c so that
the build system does not confuse it for nss_compat/compat-initgroups.c.
Build time improves very slightly; e.g. down from an average of 45.5s to
44.5s on an 8-thread mobile x86_64 CPU.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
With gcc 13.1 with --enable-fortify-source=2, tst-tcfree3 fails to
build on csky-linux-gnuabiv2 with:
../string/bits/string_fortified.h: In function ‘do_test’:
../string/bits/string_fortified.h:26:8: error: inlining failed in call
to ‘always_inline’ ‘memcpy’: target specific option mismatch
26 | __NTH (memcpy (void *__restrict __dest, const void *__restrict
__src,
| ^~~~~~
../misc/sys/cdefs.h:81:62: note: in definition of macro ‘__NTH’
81 | # define __NTH(fct) __attribute__ ((__nothrow__ __LEAF)) fct
| ^~~
tst-tcfree3.c:45:3: note: called from here
45 | memcpy (c, a, 32);
| ^~~~~~~~~~~~~~~~~
Instead of relying on -O0 to avoid malloc/free to be optimized away,
disable the builtin.
Reviewed-by: DJ Delorie <dj@redhat.com>
When building the testroot, the script runs the newly built ld.so on a
couple of binaries in order to copy over any additional libraries
needed. However, if the dependencies are found in the system cache, it
will be copied over using that path.
This is problematic if the system ld.so and the one built don't have the
exact same search configuration. We encountered this in Ubuntu, where we
build a variant of libc with -fno-omit-frame-pointer for accurate
performance profiling.
This variant is built using a non-standard slibdir to be able to be
co-installed with the default library (e.g. slibdir = /lib/libc6-prof).
Since we have /lib pointing to /usr/lib, any additional dependency
should still be reachable via /usr. However, resolving via the cache
might result in the additional DSOs being copied into $testroot/lib, out
of the search path in the container.
The problem has been triggered by 1d5024f4f0
("support: Build with exceptions and asynchronous unwind tables [BZ #30587]")
which introduced a dependency on libgcc_s.so.1 under some circumstances.
Downstream bug: https://bugs.launchpad.net/ubuntu/+source/glibc/+bug/2031495
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This avoids crashes due to partially written files, after a package
update is interrupted.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The arguments for "expected" and "got" are mismatched. Furthermore
this patch is dumping both values as hex.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
If feenableexcept or fedisableexcept gets excepts=FE_INVALID=0x80
as input, we have a signed left shift: 0x80 << 24 which is not
representable as int and thus is undefined behaviour according to
C standard.
This patch casts excepts as unsigned int before shifting, which is
defined.
For me, the observed undefined behaviour is that the shift is done
with "unsigned"-instructions, which is exactly what we want.
Furthermore, I don't get any exception-flags.
After the fix, the code is using the same instruction sequence as
before.
This reverts commit 6985865bc3.
Reason for revert:
The commit changes the order of ELF destructor calls too much relative
to what applications expect or can handle. In particular, during
process exit and _dl_fini, after the revert commit, we no longer call
the destructors of the main program first; that only happens after
some dlopen'ed objects have been destructed. This robs applications
of an opportunity to influence destructor order by calling dlclose
explicitly from the main program's ELF destructors. A couple of
different approaches involving reverse constructor order were tried,
and none of them worked really well. It seems we need to keep the
dependency sorting in _dl_fini.
There is also an ambiguity regarding nested dlopen calls from ELF
constructors: Should those destructors run before or after the object
that called dlopen? Commit 6985865bc3 used reverse order
of the start of ELF constructor calls for destructors, but arguably
using completion of constructors is more correct. However, that alone
is not sufficient to address application compatibility issues (it
does not change _dl_fini ordering at all).
This patch implements comprehensive tests for strlcat/wcslcat
functions. Tests are mostly derived from strncat test suites
and modified to incorporate strlcat/wcslcat specifications.
Reviewed-by: DJ Delorie <dj@redhat.com>
This patch implements comprehensive tests for strlcpy/wcslcpy
functions. Tests are mostly derived from strncpy test suites
and modified to incorporate strlcpy/wcslcpy specifications.
Reviewed-by: DJ Delorie <dj@redhat.com>
Linux 6.5 adds a constant SCM_PIDFD (recall that the non-uapi
linux/socket.h, where this constant is added, is in fact a header
providing many constants that are part of the kernel/userspace
interface). This shows up that SCM_SECURITY, from the same set of
definitions and added in Linux 2.6.17, is also missing from glibc,
although glibc has the first two constants from this set, SCM_RIGHTS
and SCM_CREDENTIALS; add both missing constants to glibc.
Tested for x86_64.
Linux 6.5 adds a constant AT_HANDLE_FID; add it to glibc. Because
this is a flag for the function name_to_handle_at declared in
bits/fcntl-linux.h, put the flag there rather than alongside other
AT_* flags in (OS-independent) fcntl.h.
Tested for x86_64.
With GCC 14 on 32-bit x86 the compiler emits a maybe-uninitialized
warning:
../sysdeps/ieee754/dbl-64/k_rem_pio2.c: In function '__kernel_rem_pio2':
../sysdeps/ieee754/dbl-64/k_rem_pio2.c:364:20: error: 'fq' may be used uninitialized [-Werror=maybe-uninitialized]
364 | y[0] = fq[0]; y[1] = fq[1]; y[2] = fw;
| ~~^~~
This is similar to the warning that is suppressed in the other branch of
the switch. Help the compiler knowing that the variable is always
initialized, which also makes the suppression obsolete.
For container tests, gdb needs to set the sysroot to the corresponding
testroot.root directory. The assumption was that PIDs < 3 means that
we are running within a container.
Starting with commit 2fe64148a8
"Allow for unpriviledged nested containers", the default is to use
the PID namespace of the parent. Thus support_test_main.c does not
recognize our container anymore.
This patch now assumes that we are running inside a container if
test-container.c has set PID_OUTSIDE_CONTAINER and always uses this
PID independent of having a new PID namespace or not.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The grouping verification only worked for a single-byte thousands
separator. With a multi-byte separator it returned as if no separators
were present. The actual parsing in str_to_mpn will then go wrong when
there are multiple adjacent multi-byte separators in the number.
Notes for future devs:
* Add tools as you find they're needed, with version 0,0
* Bump version when you find an old tool that doesn't work
* Don't add a version just because you know it works
Co-authored-by: Lukasz Majewski <lukma@denx.de>
Co-authored-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
This commit refactors `strrchr-evex` and `strrchr-evex512` to use a
common implementation: `strrchr-evex-base.S`.
The motivation is `strrchr-evex` needed to be refactored to not use
64-bit masked registers in preperation for AVX10.
Once vec-width masked register combining was removed, the EVEX and
EVEX512 implementations can easily be implemented in the same file
without any major overhead.
The net result is performance improvements (measured on TGL) for both
`strrchr-evex` and `strrchr-evex512`. Although, note there are some
regressions in the test suite and it may be many of the cases that
make the total-geomean of improvement/regression across bench-strrchr
are cold. The point of the performance measurement is to show there
are no major regressions, but the primary motivation is preperation
for AVX10.
Benchmarks where taken on TGL:
https://www.intel.com/content/www/us/en/products/sku/213799/intel-core-i711850h-processor-24m-cache-up-to-4-80-ghz/specifications.html
EVEX geometric_mean(N=5) of all benchmarks New / Original : 0.74
EVEX512 geometric_mean(N=5) of all benchmarks New / Original: 0.87
Full check passes on x86.
* Transpose table layout for improved memory access
* Use half-vector special comparisons for AdvSIMD
* Improve register use near special-case branches
- Due to the presence of a function call, return value would get
mov-d out of x0 in order to facilitate PCS. By moving the final
computation after the branch this can be avoided
Also change SVE routines to use overloaded intrinsics for readability.
Use overloaded intrinsics for readability. Codegen does not
change, however while we're bringing the routines up-to-date with
recent improvements to other routines in AOR it is worth copying
this change over as well.
* Update ULP comment reflecting a new observed max in [-pi/2, pi/2]
* Use the same polynomial in AdvSIMD and SVE, rather than FTRIG instructions
* Improve register use near special-case branch
Also use overloaded intrinsics for SVE.
When -D_FORTIFY_SOURCE=2 was given during compilation,
sprintf and similar functions will check if their
first argument is in read-only memory and exit with
*** %n in writable segment detected ***
otherwise. To check if the memory is read-only, glibc
reads frpm the file "/proc/self/maps". If opening this
file fails due to too many open files (EMFILE), glibc
will now ignore this error.
Fixes [BZ #30932]
Signed-off-by: Volker Weißmann <volker.weissmann@gmx.de>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Rearrange lists of routines, tests, etc. into one-per-line in
nss/Makefile and sort them using scripts/sort-makefile-lines.py.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Rearrange lists of routines, tests, etc. into one-per-line in
inet/Makefile and sort them using scripts/sort-makefile-lines.py.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The iconv buffer sizes must not include the \0 string terminator.
And the output termination with *outbufpos = '\0' was OOB.
Consistently use non-null-terminated buffer sizes.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The string parsing routine may end up writing beyond bounds of tunestr
if the input tunable string is malformed, of the form name=name=val.
This gets processed twice, first as name=name=val and next as name=val,
resulting in tunestr being name=name=val:name=val, thus overflowing
tunestr.
Terminate the parsing loop at the first instance itself so that tunestr
does not overflow.
This also fixes up tst-env-setuid-tunables to actually handle failures
correct and add new tests to validate the fix for this CVE.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
GLIBC_TUNABLES scrubbing happens earlier than envvar scrubbing and some
tunables are required to propagate past setxid boundary, like their
env_alias. Rely on tunable scrubbing to clean out GLIBC_TUNABLES like
before, restoring behaviour in glibc 2.37 and earlier.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux v5.10 added a mount option MS_NOSYMFOLLOW, which was added to
glibc in commit 0ca21427d9.
Add the corresponding statfs/statvfs flag bit, ST_NOSYMFOLLOW.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The bufsize on current Linux build is:
size_t bufsize = (type == 439963904 ? 2 : 1) * (12 + 4 + 255 + 1);
So with upper bound as 544 (2 * (12 + 4 + 255 + 1)). However, it might
increase to 2 * PACKETSIZE later with malloc. The default scratch_buffer
should fullfill the most usual allocation requirement.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Joe Simmons-Talbott <josimmon@redhat.com>
Read directly into the mips_abiflags struct rather than reading the
entire segment and using alloca when the passed buffer is not big enough.
Checked with build-many-glibcs.py on mips-linux-gnu
Tested-by: Ying Huang <ying.huang@oss.cipunited.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This commit add support for the new AVX10 cpu features:
https://cdrdv2-public.intel.com/784267/355989-intel-avx10-spec.pdf
We add checks for:
- `AVX10`: Check if AVX10 is present.
- `AVX10_{X,Y,Z}MM`: Check if a given vec class has AVX10 support.
`make check` passes and cpuid output was checked against GNR/DMR on an
emulator.
getaddrinfo doesn't look for any RESOLVER defines for conditional
compilation. Therefore, remove the unnecessary -DRESOLVER build flag in
getaddrinfo's CFLAGS.
Checked on x86_64 for code generation changes; none found.
ISO C2x defines scanf length modifiers wN (for intN_t / int_leastN_t /
uintN_t / uint_leastN_t) and wfN (for int_fastN_t / uint_fastN_t).
Add support for those length modifiers, similar to the printf support
previously added.
Tested for x86_64 and x86.
If the binary to run is 'env', test-containers skips it and adds
any required environment variable on the process envs variables.
This simplifies the required code to spawn new process (no need
to build an env-like program).
However, this is an issue for recursive_remove if there is any
LD_PRELOAD, since test-container will not prepend the loader command
along with required paths. If the required preloaded library can
not be loaded by the system glibc, the 'post-clean rsync' will
eventually fail.
One example is if system glibc does not support DT_RELR and the
built glibc does, the nss/tst-nss-gai-hv2-canonname test fails
with:
../scripts/evaluate-test.sh nss/tst-nss-gai-hv2-canonname $? false false
86_64-linux-gnu/nss/tst-nss-gai-hv2-canonname.test-result
rm: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_ABI_DT_RELR' not
found (required by x86_64-linux-gnu/malloc/libc_malloc_debug.so)
Instead trying to figure out the required loader arguments on how
to spawn the 'rm -rf', replace the command with a nftw call.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
Compilation fails when building with -DNDEBUG after commit a3189f66a5.
Here is the error:
dl-close.c: In function ‘_dl_close_worker’:
dl-close.c:140:22: error: unused variable ‘nloaded’ [-Werror=unused-variable]
140 | const unsigned int nloaded = ns->_ns_nloaded;
Add __attribute_maybe_unused__ for‘nloaded’to fix it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
