Linux kernel powerpc documentation states issuing a syscall inside a
transaction is not recommended and may lead to undefined behavior. It
also states syscalls does not abort transactoin neither they run in
transactional state.
To avoid side-effects being visible outside transactions, GLIBC with
lock elision enabled will issue a transaction abort instruction just
before all syscalls if hardware supports hardware transactions.
This updates glibc for the changes in the ELFv2 relating to the
stack frame layout. These are described in more detail here:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01149.htmlhttp://gcc.gnu.org/ml/gcc-patches/2013-11/msg01146.html
Specifically, the "compiler and linker doublewords" were removed,
which has the effect that the save slot for the TOC register is
now at offset 24 rather than 40 to the stack pointer.
In addition, a function may now no longer necessarily assume that
its caller has set up a 64-byte register save area its use.
To address the first change, the patch goes through all assembler
files and replaces immediate offsets in instructions accessing the
ABI-defined stack slots by symbolic offsets. Those already were
defined in ucontext_i.sym and used in some of the context routines,
but that doesn't really seem like the right place for those defines.
The patch instead defines those symbolic offsets in sysdeps.h,
in two variants for the old and new ABI, and uses them systematically
in all assembler files, not just the context routines.
The second change only affected a few assembler files that used
the save area to temporarily store some registers. In those
cases where this happens within a leaf function, this patch
changes the code to store those registers to the "red zone"
below the stack pointer. Otherwise, the functions already allocate
a stack frame, and the patch changes them to add extra space in
these frames as temporary space for the ELFv2 ABI.
This patch adds support for the ELFv2 ABI feature to remove function
descriptors. See this GCC patch for in-depth discussion:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01141.html
This mostly involves two types of changes: updating assembler source
files to the new logic, and updating the dynamic loader.
After the refactoring in the previous patch, most of the assembler source
changes can be handled simply by providing ELFv2 versions of the
macros in sysdep.h. One somewhat non-obvious change is in __GI__setjmp:
this used to "fall through" to the immediately following __setjmp ENTRY
point. This is no longer safe in the ELFv2 since ENTRY defines both
a global and a local entry point, and you cannot simply fall through
to a global entry point as it requires r12 to be set up.
Also, makecontext needs to be updated to set up registers according to
the new ABI for calling into the context's start routine.
The dynamic linker changes mostly consist of removing special code
to handle function descriptors. We also need to support the new PLT
and glink format used by the the ELFv2 linker, see:
https://sourceware.org/ml/binutils/2013-10/msg00376.html
In addition, the dynamic linker now verifies that the dynamic libraries
it loads match its own ABI.
The hack in VDSO_IFUNC_RET to "synthesize" a function descriptor
for vDSO routines is also no longer necessary for ELFv2.
This is the first patch to support the new ELFv2 ABI in glibc.
As preparation, this patch simply refactors some of the powerpc64 assembler
code to move all code related to creating function descriptors (.opd section)
or using function descriptors (function pointer call) into a central place
in sysdep.h.
Note that most locations creating .opd entries were already using macros
in sysdep.h, this patch simply extends this to the remaining places.
No relevant change in generated code expected.
directive to ENTRY macros.
(END): Add cfi_endproc directive to END macro.
* sysdeps/powerpc/powerpc64/sysdep.h (ENTRY, EALIGN): Add cfi_startproc
directive to ENTRY macros.
(END, END_GEN_TB): Add cfi_endproc directive to END macros.
* sysdeps/powerpc/powerpc32/dl-start.S: Remove ENTRY()s for
_dl_start_user and _dl_main_dispatch.
* sysdeps/powerpc/powerpc32/fpu/fprrest.S: Use END macro.
* sysdeps/powerpc/powerpc32/fpu/fprsave.S: Use Likewise.
* sysdeps/powerpc/powerpc32/gprrest0.S: Likewise.
* sysdeps/powerpc/powerpc32/gprrest1.S: Likewise.
* sysdeps/powerpc/powerpc32/gprsave0.S: Likewise.
* sysdeps/powerpc/powerpc32/gprsave1.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/socket.S: Remove redundant
cfi_startproc and cfi_endproc.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/socket.S: Likewise.
2006-01-04 Ulrich Drepper <drepper@redhat.com>
* sysdeps/pthread/aio_misc.h (struct waitlist): Add result member.
* sysdeps/pthread/aio_notify.c (__aio_notify): For synchronous waiters,
failed I/O, and a result pointer, set value to -1.
* sysdeps/pthread/aio_suspend.c: Initialize result pointer to NULL.
* sysdeps/pthread/lio_listio.c: For LIO_WAIT, point result pointer in
wait list to local variable result. If nonzero afterwards, set errno
to EIO. For LIO_NOWAIT set result to NULL.
* rt/Makefile (tests): Add tst-aio8.
* rt/tst-aio8.c: New file.
* sysdeps/posix/getaddrinfo.c (gaih_inet): Set no_inet6_date alse
if only PF_INET address is needed.
* nss/getXXbyYY_r.c: Make sure we always return a nonzero value in
case of an error.
2003-01-11 Jim Meyering <jim@meyering.net>
* io/ftw.c [HAVE_CONFIG_H]: Include <config.h>.
[HAVE_SYS_PARAM_H || _LIBC]: Guard inclusion of <sys/param.h>.
Include <sys/stat.h>, not <include/sys/stat.h>, if !_LIBC.
[!_LIBC] (__chdir, __closedir, __fchdir, __getcwd, __opendir): Define.
[!_LIBC] (__readdir64, __tdestroy, __tfind, __tsearch): Define.
[!_LIBC] (internal_function, dirent64, MAX): Define.
(__set_errno): Define if not already defined.
(open_dir_stream): When FTW_CHDIR is enabled, invoke opendir on
the basename, not the entire file name.
(process_entry): When FTW_CHDIR is enabled, invoke XSTAT or LXSTAT on
the basename, not the entire file name.
2003-01-12 Ulrich Drepper <drepper@redhat.com>
* string/tester.c (test_strcpy): Disable last added strcpy until
it is fixed.
2003-01-11 Philip Blundell <philb@gnu.org>
* sysdeps/unix/sysv/linux/arm/socket.S: Add cancellation support.
2003-01-11 Andreas Schwab <schwab@suse.de>
* Makerules: Add vpath for %.dynsym and %.so so that the
implicit rule chaining for check-abi works.
2003-01-11 Kaz Kojima <kkojima@rr.iij4u.or.jp>
* sysdeps/unix/sysv/linux/sh/sysdep.h (SYSCALL_ERROR_HANDLER):
Add non-PIC case.
2003-01-11 Jakub Jelinek <jakub@redhat.com>
* elf/tls-macros.h [__ia64__] (__TLS_CALL_CLOBBERS): Define.
[__ia64__] (TLS_LE, TLS_IE): Fix typos. Add ;; at start of asm if
gp is used early.
[__ia64__] (TLS_LD, TLS_GD): Likewise. Use __TLS_CALL_CLOBBERS.
* elf/Makefile ($(objpfx)tst-tlsmod5.so, $(objpfx)tst-tlsmod6.so):
Ensure libc.so in DT_NEEDED.
* sysdeps/alpha/dl-machine.h (elf_machine_rela): Move
CHECK_STATIC_TLS before l_tls_offset use.
* sysdeps/i386/dl-machine.h (elf_machine_rel, elf_machine_rela):
Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/generic/dl-tls.c (_dl_allocate_tls_storage) [TLS_DTV_AT_TP]:
Allocate TLS_PRE_TCB_SIZE bytes below result.
(_dl_deallocate_tls) [TLS_DTV_AT_TP]: Adjust before freeing.
* sysdeps/generic/libc-tls.c (__libc_setup_tls): If
TLS_INIT_TP_EXPENSIVE is not defined, allocate even if no PT_TLS
segment has been found. If TLS_DTV_AT_TP, allocate TLS_PRE_TCB_SIZE
bytes below result and add tcb_offset to memsz.
* sysdeps/ia64/dl-tls.h (__tls_get_addr): New prototype.
* sysdeps/ia64/dl-machine.h: Include tls.h.
(elf_machine_type_class): Return ELF_RTYPE_CLASS_PLT for TLS relocs
too.
(elf_machine_rela): Assume if sym_map != NULL sym is non-NULL too.
Handle R_IA64_DTPMOD*, R_IA64_DTPREL* and R_IA64_TPREL* relocations.
* sysdeps/ia64/libc-tls.c: New file.
2003-01-10 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/sysdep.h (PSEUDO_RET): Add branch hit.
* sysdeps/unix/sysv/linux/powerpc/bits/stat.h (STAT_VER_LINUX):
Fix type. Move definition out of #if.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ftruncate64.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pread.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pread64.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite64.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/socket.S: Add cancellation
support.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Remove
ftruncate64, pread64, pwrite64, truncate64 entries.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h
(INLINE_SYSCALL): New version that supports function call like
syscalls. Add __builtin_expect.
(LOADARGS_n): Add argument size safety checks.
(INTERNAL_SYSCALL): New Macro.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/truncate64.c: New file.
* sysdeps/unix/sysv/linux/powerpc/sys/procfs.h [__PPC_ELF_H]: Avoid
redefinition of elf_fpreg_t and elf_fpregset_t.
2003-01-12 Ulrich Drepper <drepper@redhat.com>
* elf/dl-close.c (_dl_close): Add several asserts. Correct and
simplify test for unloading. If loader of a DSO is unloaded do not
use its scope anymore. Fall back to own scope and adjust opencounts.
Fix several comments.
* elf/dl-deps.c (_dl_map_object_deps): Always allocate memory for
the l_searchlist, not only for l_initfini.
* elf/dl-lookup.c (add_dependencies): Avoid creating relocation
dependencies if objects cannot be removed. Remove object with the
definition as not unloadable if necessary.
* elf/reldep6.c: Create relocation dependency before closing the first
module.
2003-01-10 Guido Günther <agx@sigxcpu.org>
* elf/Makefile: Add rules to build and run reldep9 test.
* elf/reldep9.c: New file.
* elf/reldep9mod1.c: New file.
* elf/reldep9mod2.c: New file.
* elf/reldep9mod3.c: New file.
2003-01-09 Jakub Jelinek <jakub@redhat.com>
* elf/Makefile: Add rules to build and run nodelete2 test.
* elf/nodelete2.c: New file.
* elf/nodel2mod1.c: New file.
* elf/nodel2mod2.c: New file.
* elf/nodel2mod3.c: New file.
2003-01-09 Jakub Jelinek <jakub@redhat.com>
* sysdeps/powerpc/powerpc32/sysdep.h: New file. Define powerpc32
specific macros copied from sysdeps/powerpc/sysdep.h.
* sysdeps/powerpc/powerpc64/sysdep.h: New file. Define powerpc64
specific macros.
* sysdeps/unix/powerpc/sysdep.h: Include <bits/wordsize.h>.
[__WORDSIZE==64]: Include sysdeps/powerpc/powerpc64/sysdep.h.
[!__WORDSIZE==64]: Include sysdeps/powerpc/powerpc32/sysdep.h.
