This recently came up during a cleanup to remove misaligned accesses
from the RISC-V port.
Link: https://sourceware.org/pipermail/libc-alpha/2022-June/139961.html
Suggested-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Fangrui Song <maskray@google.com>
As discussed at the patch review meeting
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Reviewed-by: Simon Chopin <simon.chopin@canonical.com>
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the logp1 functions (aliases for log1p functions - the
name is intended to be more consistent with the new log2p1 and
log10p1, where clearly it would have been very confusing to name those
functions log21p and log101p). As aliases rather than new functions,
the content of this patch is somewhat different from those actually
adding new functions.
Tests are shared with log1p, so this patch *does* mechanically update
all affected libm-test-ulps files to expect the same errors for both
functions.
The vector versions of log1p on aarch64 and x86_64 are *not* updated
to have logp1 aliases (and thus there are no corresponding header,
tests, abilist or ulps changes for vector functions either). It would
be reasonable for such vector aliases and corresponding changes to
other files to be made separately. For now, the log1p tests instead
avoid testing logp1 in the vector case (a Makefile change is needed to
avoid problems with grep, used in generating the .c files for vector
function tests, matching more than one ALL_RM_TEST line in a file
testing multiple functions with the same inputs, when it assumes that
the .inc file only has a single such line).
Tested for x86_64 and x86, and with build-many-glibcs.py.
These structs describe file formats under /var/log, and should not
depend on the definition of _TIME_BITS. This is achieved by
defining __WORDSIZE_TIME64_COMPAT32 to 1 on 32-bit ports that
support 32-bit time_t values (where __time_t is 32 bits).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The default <utmp-size.h> is for ports with a 64-bit time_t.
Ports with a 32-bit time_t or with __WORDSIZE_TIME64_COMPAT32=1
need to override it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The aarch64 uses 'trad' for traditional tls and 'desc' for tls
descriptors, but unlike other targets it defaults to 'desc'. The
gnutls2 configure check does not set aarch64 as an ABI that uses
TLS descriptors, which then disable somes stests.
Also rename the internal machinery fron gnu2 to tls descriptors.
Checked on aarch64-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
ARM _dl_tlsdesc_dynamic slow path has two issues:
* The ip/r12 is defined by AAPCS as a scratch register, and gcc is
used to save the stack pointer before on some function calls. So it
should also be saved/restored as well. It fixes the tst-gnu2-tls2.
* None of the possible VFP registers are saved/restored. ARM has the
additional complexity to have different VFP bank sizes (depending of
VFP support by the chip).
The tst-gnu2-tls2 test is extended to check for VFP registers, although
only for hardfp builds. Different than setcontext, _dl_tlsdesc_dynamic
does not have HWCAP_ARM_IWMMXT (I don't have a way to properly test
it and it is almost a decade since newer hardware was released).
With this patch there is no need to mark tst-gnu2-tls2 as XFAIL.
Checked on arm-linux-gnueabihf.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The commit 49d877a80b (arm: Remove
_dl_skip_args usage) removed the _SKIP_ARGS literal, which was
previously loader to r4 on loader _start. However, the cleanup did not
remove the following 'ldr r4, [sl, r4]' on _dl_start_user, used to check
to skip the arguments after ld self-relocations.
In my testing, the kernel initially set r4 to 0, which makes the
ldr instruction just read the _GLOBAL_OFFSET_TABLE_. However, since r4
is a callee-saved register; a different runtime might not zero
initialize it and thus trigger an invalid memory access.
Checked on arm-linux-gnu.
Reported-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
WG14 decided to use the name C23 as the informal name of the next
revision of the C standard (notwithstanding the publication date in
2024). Update references to C2X in glibc to use the C23 name.
This is intended to update everything *except* where it involves
renaming files (the changes involving renaming tests are intended to
be done separately). In the case of the _ISOC2X_SOURCE feature test
macro - the only user-visible interface involved - support for that
macro is kept for backwards compatibility, while adding
_ISOC23_SOURCE.
Tested for x86_64.
The _dl_non_dynamic_init does not parse LD_PROFILE, which does not
enable profile for dlopen objects. Since dlopen is deprecated for
static objects, it is better to remove the support.
It also allows to trim down libc.a of profile support.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Bump autoconf requirement to 2.71 to allow regenerating configure on
more recent distributions. autoconf 2.71 has been in Fedora since F36
and is the current version in Debian stable (bookworm). It appears to
be current in Gentoo as well.
All sysdeps configure and preconfigure scripts have also been
regenerated; all changes are trivial transformations that do not affect
functionality.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The __builtin_arm_uqsub8 is an internal GCC builtin which might change
in future release (the correct way is to include "arm_acle.h" and use
__uqsub8 ()). Since not all compilers support it, just use the
inline assembler instead.
Checked on armv7a-linux-gnueabihf.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
__builtin_arm_uqsub8 is only available on gcc newer or equal than 10.
Checked on arm-linux-gnueabihf built with gcc 9.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
While arm has the more important string functions in assembly,
there are still a few generic routines used.
Use the UQSUB8 insn for testing of zeros.
Checked on armv7-linux-gnueabihf
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
clang emits an warning when a double alias redirection is used, to warn
the the original symbol will be used even when weak definition is
overridden. However, this is a common pattern for weak_alias, where
multiple alias are set to same symbol.
Reviewed-by: Fangrui Song <maskray@google.com>
The ARM preconfigure script tries to detect the capabilities of the
target platform by checking the compiler's predefined architecture
macros. However, if the compiler is tuning for AArch32 on ARMv8/v9 this
step fails:
checking for sysdeps preconfigure fragments... aarch64 alpha arc arm
WARNING: arm/preconfigure: Did not find ARM architecture type; using default
This is because preconfigure.ac doesn't escape the square brackets in
the glob for matching compilers targeting ARMv8. Adding another pair of
brackets to escape the first pair fixes this:
checking for sysdeps preconfigure fragments... aarch64 alpha arc arm
Found compiler is configured for something newer than v7 - using v7
Signed-off-by: Felix Riemann <felix.riemann@sma.de>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In the future, this will result in a compilation failure if the
macros are unexpectedly undefined (due to header inclusion ordering
or header inclusion missing altogether).
Assembler sources are more difficult to convert. In many cases,
they are hand-optimized for the mangling and no-mangling variants,
which is why they are not converted.
sysdeps/s390/s390-32/__longjmp.c and sysdeps/s390/s390-64/__longjmp.c
are special: These are C sources, but most of the implementation is
in assembler, so the PTR_DEMANGLE macro has to be undefined in some
cases, to match the assembler style.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This allows us to define a generic no-op version of PTR_MANGLE and
PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE
unconditionally in C sources, avoiding an unintended loss of hardening
due to missing include files or unlucky header inclusion ordering.
In i386 and x86_64, we can avoid a <tls.h> dependency in the C
code by using the computed constant from <tcb-offsets.h>. <sysdep.h>
no longer includes these definitions, so there is no cyclic dependency
anymore when computing the <tcb-offsets.h> constants.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
As per other architectures. I have checked on a armv8 hardware with
the following configurations:
arm-linux-gnueabihf (gcc built with --with-float=hard --with-cpu=arm926ej-s)
armv5-linux-gnueabihf (-march=armv5te -mfpu=vfpv3)
armv7-linux-gnueabihf (-march=armv7-a -mfpu=vfpv3)
armv7-thumb-linux-gnueabihf (-march=armv7-a -mfpu=vfpv3 -mthumb)
armv7-neon-linux-gnueabihf (-march=armv7-a -mfpu=neon)
armv7-neonhard-linux-gnueabihf (-march=armv7-a -mfpu=neon -mfloat-abi=hard)
Without any regression.
I haven't dig into the code, but since Linux atomic-machine.h handle
pre-ARMv6 and ARMv6 I expect the compiler might have some small room
to optimize.
The code size also improves is most of the configurations:
* master
text data bss dec hex filename
1727801 9720 37928 1775449 1b1759 arm-linux-gnueabihf/libc.so
1691729 9720 37928 1739377 1a8a71 arm-linux-gnueabihf-armv7-disable-multi-arch/libc.so
1725509 9720 37928 1773157 1b0e65 armv5-linux-gnueabihf/libc.so
1700757 9720 37928 1748405 1aadb5 armv6-linux-gnueabihf/libc.so
1698973 9720 37928 1746621 1aa6bd armv6t2-linux-gnueabihf/libc.so
1695481 9752 37928 1743161 1a9939 armv7-linux-gnueabihf/libc.so
1692917 9744 37928 1740589 1a8f2d armv7-neonhard-linux-gnueabihf/libc.so
1692917 9744 37928 1740589 1a8f2d armv7-neon-linux-gnueabihf/libc.so
1225353 9752 37928 1273033 136cc9 armv7-thumb-linux-gnueabihf/libc.so
* patched
text data bss dec hex filename
1726805 9720 37928 1774453 1b1375 arm-linux-gnueabihf/libc.so
1689321 9720 37928 1736969 1a8109 arm-linux-gnueabihf-armv7-disable-multi-arch/libc.so
1724433 9720 37928 1772081 1b0a31 armv5-linux-gnueabihf/libc.so
1698301 9720 37928 1745949 1aa41d armv6-linux-gnueabihf/libc.so
1696525 9720 37928 1744173 1a9d2d armv6t2-linux-gnueabihf/libc.so
1693009 9752 37928 1740689 1a8f91 armv7-linux-gnueabihf/libc.so
1690493 9744 37928 1738165 1a85b5 armv7-neonhard-linux-gnueabihf/libc.so
1690493 9744 37928 1738165 1a85b5 armv7-neon-linux-gnueabihf/libc.so
1223837 9752 37928 1271517 1366dd armv7-thumb-linux-gnueabihf/libc.so
The idea is eventually move all architectures to use compiler builtins.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Rename atomic_exchange_rel/acq to use atomic_exchange_release/acquire
since these map to the standard C11 atomic builtins.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add a proper bounds check to __libc_ifunc_impl_list. This makes MAX_IFUNC
redundant and fixes several targets that will write outside the array.
To avoid unnecessary large diffs, pass the maximum in the argument 'i' to
IFUNC_IMPL_ADD - 'max' can be used in new ifunc definitions and existing
ones can be updated if desired.
Passes buildmanyglibc.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Newer versions of GNU grep (after grep 3.7, not inclusive) will warn on
'egrep' and 'fgrep' invocations.
Convert usages within the tree to their expanded non-aliased counterparts
to avoid irritating warnings during ./configure and the test suite.
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. It makes the _fixup_stack branch ununsed.
Checked with qemu-user that arguments are correctly passed on both
constructors and main program.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
_dl_skip_args is always 0, so the target specific code that modifies
argv after relro protection is applied is no longer used.
After the patch relro protection is applied to _dl_argv consistently
on all targets.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
PI_STATIC_AND_HIDDEN indicates whether accesses to internal linkage
variables and hidden visibility variables in a shared object (ld.so)
need dynamic relocations (usually R_*_RELATIVE). PI (position
independent) in the macro name is a misnomer: a code sequence using GOT
is typically position-independent as well, but using dynamic relocations
does not meet the requirement.
Not defining PI_STATIC_AND_HIDDEN is legacy and we expect that all new
ports will define PI_STATIC_AND_HIDDEN. Current ports defining
PI_STATIC_AND_HIDDEN are more than the opposite. Change the configure
default.
No functional change.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
-z combreloc has been the default regadless of the architecture since
binutils commit f4d733664aabd7bd78c82895e030ec9779a92809 (2002). The
configure check added in commit fdde83499a (2001) has long been
unneeded.
We can therefore treat HAVE_Z_COMBRELOC as always 1 and delete dead code
paths in dl-machine.h files (many were copied from commit a711b01d34
and ee0cb67ec2).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Prelinked binaries and libraries still work, the dynamic tags
DT_GNU_PRELINKED, DT_GNU_LIBLIST, DT_GNU_CONFLICT just ignored
(meaning the process is reallocated as default).
The loader environment variable TRACE_PRELINKING is also removed,
since it used solely on prelink.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
It can be used to speed up the libgcc unwinder, and the internal
_dl_find_dso_for_object function (which is used for caller
identification in dlopen and related functions, and in dladdr).
_dl_find_object is in the internal namespace due to bug 28503.
If libgcc switches to _dl_find_object, this namespace issue will
be fixed. It is located in libc for two reasons: it is necessary
to forward the call to the static libc after static dlopen, and
there is a link ordering issue with -static-libgcc and libgcc_eh.a
because libc.so is not a linker script that includes ld.so in the
glibc build tree (so that GCC's internal -lc after libgcc_eh.a does
not pick up ld.so).
It is necessary to do the i386 customization in the
sysdeps/x86/bits/dl_find_object.h header shared with x86-64 because
otherwise, multilib installations are broken.
The implementation uses software transactional memory, as suggested
by Torvald Riegel. Two copies of the supporting data structures are
used, also achieving full async-signal-safety.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And use machine-sp.h instead. The Linux implementation is based on
already provided CURRENT_STACK_FRAME (used on nptl code) and
STACK_GROWS_UPWARD is replaced with _STACK_GROWS_UP.
It consolidates the code required to call la_pltexit audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
TLS_INIT_TCB_ALIGN is not actually used. TLS_TCB_ALIGN was likely
introduced to support a configuration where the thread pointer
has not the same alignment as THREAD_SELF. Only ia64 seems to use
that, but for the stack/pointer guard, not for storing tcbhead_t.
Some ports use TLS_TCB_OFFSET and TLS_PRE_TCB_SIZE to shift
the thread pointer, potentially landing in a different residue class
modulo the alignment, but the changes should not impact that.
In general, given that TLS variables have their own alignment
requirements, having different alignment for the (unshifted) thread
pointer and struct pthread would potentially result in dynamic
offsets, leading to more complexity.
hppa had different values before: __alignof__ (tcbhead_t), which
seems to be 4, and __alignof__ (struct pthread), which was 8
(old default) and is now 32. However, it defines THREAD_SELF as:
/* Return the thread descriptor for the current thread. */
# define THREAD_SELF \
({ struct pthread *__self; \
__self = __get_cr27(); \
__self - 1; \
})
So the thread pointer points after struct pthread (hence __self - 1),
and they have to have the same alignment on hppa as well.
Similarly, on ia64, the definitions were different. We have:
# define TLS_PRE_TCB_SIZE \
(sizeof (struct pthread) \
+ (PTHREAD_STRUCT_END_PADDING < 2 * sizeof (uintptr_t) \
? ((2 * sizeof (uintptr_t) + __alignof__ (struct pthread) - 1) \
& ~(__alignof__ (struct pthread) - 1)) \
: 0))
# define THREAD_SELF \
((struct pthread *) ((char *) __thread_self - TLS_PRE_TCB_SIZE))
And TLS_PRE_TCB_SIZE is a multiple of the struct pthread alignment
(confirmed by the new _Static_assert in sysdeps/ia64/libc-tls.c).
On m68k, we have a larger gap between tcbhead_t and struct pthread.
But as far as I can tell, the port is fine with that. The definition
of TCB_OFFSET is sufficient to handle the shifted TCB scenario.
This fixes commit 23c77f6018
("nptl: Increase default TCB alignment to 32").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
rseq support will use a 32-byte aligned field in struct pthread,
so the whole struct needs to have at least that alignment.
nptl/tst-tls3mod.c uses TCB_ALIGNMENT, therefore include <descr.h>
to obtain the fallback definition.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The lld linker does not support TLSDESC for arm. The have-arm-tls-desc
is a leftover of 56583289b1 to support NaCL.
Reviewed-by: Fangrui Song <maskray@google.com>
