The symbols were moved using scripts/move-symbol-to-libc.py.
There is a minor oddity here: This is generic code shared with Hurd,
and Hurd does not have time64 support. This is why the
versioned_symbol export for __aio_suspend_time64 is restricted to
the PTHREAD_IN_LIBC code.
Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
Both symbols have to be moved at the same time because they
are intertwined for __WORDSIZE == 64. The treatment of this case
is also changed to match more closely how the other files suppress
the declaration of the *64 identifier.
The symbols were moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbols were moved using scripts/move-symbol-to-libc.py.
A version placeholder symbol is needed on alpha and sparc because
of the additional symbols formerly at version GLIBC_2.3.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>:
This commit also moves the aio_misc and aio_sigquue helper,
so GLIBC_PRIVATE exports need to be added.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The Linux nptl implementation is used as base for generic fork
implementation to handle the internal locks and mutexes. The
system specific bits are moved a new internal _Fork symbol.
(This new implementation will be used to provide a async-signal-safe
_Fork now that POSIX has clarified that fork might not be
async-signal-safe [1]).
For Hurd it means that the __nss_database_fork_prepare_parent and
__nss_database_fork_subprocess will be run in a slight different
order.
[1] https://austingroupbugs.net/view.php?id=62
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
The large timeout are already tests by io/tst-utimensat-skeleton.c.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It breaks the usage case of live migration like CRIU or similar
and most usages can be optimized away by either building glibc with
a minimum 5.1 kernel or by using the 32-bit syscall for the common
case.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It breaks the usage case of live migration like CRIU or similar.
The performance drawback is it would require an extra syscall
on older kernels without 64-bit time support.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It breaks the usage case of live migration like CRIU or similar.
The performance drawback is it would require an extra syscall
on older kernels without 64-bit time support.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one. This also avoids the need
to use supports_time64() (which breaks the usage case of live migration
like CRIU or similar).
It also fixes an issue on 32-bit select call for !__ASSUME_PSELECT
(microblase with older kernels only) where the expected timeout
is a 'struct timeval' instead of 'struct timespec'.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one. This also avoids the need
to use supports_time64() (which breaks the usage case of live migration
like CRIU or similar).
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one. This also avoids the need
to use supports_time64() (which breaks the usage case of live migration
like CRIU or similar).
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For the legacy ABI with supports 32-bit time_t it calls the 64-bit
time directly, since the LFS symbols calls the 64-bit time_t ones
internally.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
This mirrors the situation on Hurd. These directories are on
the include search part, so #include <pthreadP.h> works after this
change on both Hurd and nptl.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The pthread-based implementation is the generic one. Replacing
the stubs makes it clear that they do not have to be adjusted for
the libpthread move.
Result of:
git mv -f sysdeps/pthread/aio_misc.h sysdeps/generic/
git mv sysdeps/pthread/timer_routines.c sysdeps/htl/
git mv -f sysdeps/pthread/{aio,lio,timer}_*.c rt/
Followed by manual adjustment of the #include paths in
sysdeps/unix/sysv/linux/wordsize-64, and a move of the version
definitions formerly in sysdeps/pthread/Versions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This function has no dependency on libpthread, so the move is also
applied to Hurd.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This function has no dependency on libpthread, so the move is also
applied to Hurd.
To avoid localplt failures, use __open64_nocancel instead of
pthread_setcancelstate and open.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These were turned into compat symbols as part of the libpthread
move. It turns out they are used by language run-time libraries
(e.g., the GCC D front end), so it makes to preserve them as
external symbols even though they are not declared in any header
file.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Starting with recent commit 92a7d13439
"x86-64: Align child stack to 16 bytes [BZ #27902]"
the new test misc/tst-misalign-clone has failed on s390x/s390.
This patch is now aligning the stack to a double
word boundary as also done in start.S files.
Similar to fts, ftw routines passes a stat pointer that might
differ of size and layout when 64-bit time API is used.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Similar to glob, fts routines passes a stat pointer that might
differ of size and layout when 64-bit time API is used.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The glob might pass a different stat struct for gl_stat and gl_lstat
when GLOB_ALTDIRFUNC is used. This requires add a new 64-bit time
version that also uses 64-bit time stat functions.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default). The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.
Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.
On Linux the full 64-bit time support requires a minimum of kernel
version v5.1. Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).
The i686-gnu does not yet support 64-bit time.
This patch exports following rediretions to support 64-bit time:
* libc:
adjtime
adjtimex
clock_adjtime
clock_getres
clock_gettime
clock_nanosleep
clock_settime
cnd_timedwait
ctime
ctime_r
difftime
fstat
fstatat
futimens
futimes
futimesat
getitimer
getrusage
gettimeofday
gmtime
gmtime_r
localtime
localtime_r
lstat_time
lutimes
mktime
msgctl
mtx_timedlock
nanosleep
nanosleep
ntp_gettime
ntp_gettimex
ppoll
pselec
pselect
pthread_clockjoin_np
pthread_cond_clockwait
pthread_cond_timedwait
pthread_mutex_clocklock
pthread_mutex_timedlock
pthread_rwlock_clockrdlock
pthread_rwlock_clockwrlock
pthread_rwlock_timedrdlock
pthread_rwlock_timedwrlock
pthread_timedjoin_np
recvmmsg
sched_rr_get_interval
select
sem_clockwait
semctl
semtimedop
sem_timedwait
setitimer
settimeofday
shmctl
sigtimedwait
stat
thrd_sleep
time
timegm
timerfd_gettime
timerfd_settime
timespec_get
utime
utimensat
utimes
utimes
wait3
wait4
* librt:
aio_suspend
mq_timedreceive
mq_timedsend
timer_gettime
timer_settime
* libanl:
gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It is only used for !__USE_MISC, the default way uses the kernel
headers. The patch also adds the SO_TIMESTAMP, SO_TIMESTAMPNS, and
SO_TIMESTAMPING which uses new values for 64-bit time_t kernel
interfaces.
The __USE_TIME_BITS64 is not defined internally yet, although the
internal header is used when building the 64-bit stat implementations.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Instead of replicate the same definitions from struct_shmid64_ds.h
on the multiple struct_shmid_ds.h, use a common header which is included
when required (struct_shmid64_ds_helper.h).
The __USE_TIME_BITS64 is not defined internally yet, although the
internal header is used when building the 64-bit semctl implementation.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Instead of replicate the same definitions from struct_semid64_ds.h
on the multiple struct_semid_ds.h, use a common header which is included
when required (struct_semid64_ds_helper.h).
The __USE_TIME_BITS64 is not defined internally yet, although the
internal header is used when building the 64-bit semctl implementation.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Instead of replicate the same definitions from struct_msqid64_ds.h
on the multiple struct_msqid_ds.h, use a common header which is included
when required (struct_msqid64_ds_helper.h).
The __USE_TIME_BITS64 is not defined internally yet, although the
internal header is used when building the 64-bit stat implementations.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Instead of replicate the same definitions from struct_stat_time64.h
on the multiple struct_stat.h, use a common header which is included
when required (struct_stat_time64_helper.h). The 64-bit time support
is added only for LFS support.
The __USE_TIME_BITS64 is not defined internally yet, although the
internal header is used when building the 64-bit stat implementations.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The __USE_TIME_BITS64 is not defined internally yet.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Handle the SO_TIMESTAMP{NS} similar to recvmsg: for
!__ASSUME_TIME64_SYSCALLS it converts the first 32-bit time SO_TIMESTAMP
or SO_TIMESTAMPNS and appends it to the control buffer if has extra
space or returns MSG_CTRUNC otherwise. The 32-bit time field is kept
as-is.
Also for !__ASSUME_TIME64_SYSCALLS it limits the maximum number of
'struct mmsghdr *' to IOV_MAX (and also increases the stack size
requirement to IOV_MAX times sizeof (socklen_t)). The Linux imposes
a similar limit to sendmmsg, so bound the array size on recvmmsg is not
unreasonable. And this will be used only on older when building with
32-bit time support.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The recvmsg handling is more complicated because it requires check the
returned kernel control message and make some convertions. For
!__ASSUME_TIME64_SYSCALLS it converts the first 32-bit time SO_TIMESTAMP
or SO_TIMESTAMPNS and appends it to the control buffer if has extra
space or returns MSG_CTRUNC otherwise. The 32-bit time field is kept
as-is.
Calls with __TIMESIZE=32 will see the converted 64-bit time control
messages as spurious control message of unknown type. Calls with
__TIMESIZE=64 running on pre-time64 kernels will see the original
message as a spurious control ones of unknown typ while running on
kernel with native 64-bit time support will only see the time64 version
of the control message.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The constant values will be changed for __TIMESIZE=64, so binaries built
with 64-bit time support might fail to work properly on old kernels.
Both {get,set}sockopt will retry the syscall with the old constant
values and the timeout value adjusted when kernel returns ENOTPROTOPT.
It also adds an internal only SO_{RCV,SND}TIMEO where
COMPAT_SO_{RCV,SND}TIMEO_OLD indicates pre 32-bit time support and
COMPAT_SO_{RCV,SND}TIMEO_NEW indicates time64 support. It allows to
refer to constant independently of the time_t ABI and kernel version
used.
Checked on x86_64-linux-gnu and i686-linux-gnu (on 5.4 and on 4.15
kernel).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The s390 will require the 64-bit time symbols for y2038 support.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The n32 will require the 64-bit time symbols for y2038 support.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The n32 will require the 64-bit time symbols for y2038 support.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Commit 68ab82f566 added support for the scv
syscall ABI on powerpc. Since then systems that have kernel and processor
support started using scv. However adding the proper support for a new syscall
ABI requires changes to several other projects (e.g. qemu, valgrind, strace,
kernel), which are gradually receiving support.
Meanwhile, having a way to disable scv on glibc at build time can be useful for
distros that may encounter conflicts with projects that still do not support the
scv ABI, buying time until proper support is added.
This commit adds a --disable-scv option that disables scv support and uses sc
for all syscalls, like before commit 68ab82f566.
Reviewed-by: Raphael M Zinsly <rzinsly@linux.ibm.com>
Now that pthread_kill is provided by libc.so it is possible to
implement the generic POSIX implementation as
'pthread_kill(pthread_self(), sig)'.
For Linux implementation, pthread_kill read the targeting TID from
the TCB. For raise, this it not possible because it would make raise
fail when issue after vfork (where creates the resulting process
has a different TID from the parent, but its TCB is not updated as
for pthread_create). To make raise use pthread_kill, it is make
usable from vfork by getting the target thread id through gettid
syscall.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
This patch replaced obsolete AC_TRY_COMPILE to AC_COMPILE_IFELSE or
AC_PREPROC_IFELSE.
It has been confirmed that GNU 'autoconf' 2.69 suppressed obsolete
warnings, updated the following files:
- configure
- sysdeps/mach/configure
- sysdeps/mach/hurd/configure
- sysdeps/s390/configure
- sysdeps/unix/sysv/linux/configure
and didn't change the following files:
- sysdeps/ieee754/ldbl-opt/configure
- sysdeps/unix/sysv/linux/powerpc/configure
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
In elf/Makefile, remove the $(libdl) dependency from testobj1.so
because it the unused libdl DSO now causes elf/tst-unused-deps to
fail.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
There is a minor functionality enhancement: dlerror now sets
errno if it was set as part of the exception. (This is the result
of using %m in asprintf, to avoid the strerror PLT call.) The
previous errno value upon function return was unpredictable.
Documenting this as a feature is premature; we need to make sure
that the error codes are meaningful when they are set by the dynamic
loader.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some targets have a GLIBC_2.0 baseline for libdl, while using
GLIBC_2.2 for libc. This means that the generated libc.map file
does not have any version nodes for GLIBC_2.0 or GLIBC_2.1. However,
moving symbols from libdl into libc needs such version nodes.
(Future symbol moves from librt will need this as well.)
This kludge is only necessary for symbols predating GLIBC_2.2 because
the affected targets use GLIBC_2.2 as the baseline for libc. Given
the small number and fixed set of affected architectures, no generic
mechanism is implemented, and instead the map file fragment is
hard-coded in scripts/versions.mk.
The compat_symbol macro already emits the appropriate version strings,
so no adjustments are needed there.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some symbols have explicit versioned_symbol or compat_symbol markers
in the sources, but no corresponding entry in the Versions files.
This presently works because the local: * directive is only applied
to the base version.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
__pthread_attr_copy can fail and does not initialize the attribute
structure in that case.
If __pthread_attr_copy is never called and there is no allocated
attribute, pthread_attr_destroy should not be called, otherwise
there is a null pointer dereference in rt/tst-mqueue6.
Fixes commit 42d3593505
("Use __pthread_attr_copy in mq_notify (bug 27896)").
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch optimizes the performance of memcpy/memmove for A64FX [1]
which implements ARMv8-A SVE and has L1 64KB cache per core and L2 8MB
cache per NUMA node.
The performance optimization makes use of Scalable Vector Register
with several techniques such as loop unrolling, memory access
alignment, cache zero fill, and software pipelining.
SVE assembler code for memcpy/memmove is implemented as Vector Length
Agnostic code so theoretically it can be run on any SOC which supports
ARMv8-A SVE standard.
We confirmed that all testcases have been passed by running 'make
check' and 'make xcheck' not only on A64FX but also on ThunderX2.
And also we confirmed that the SVE 512 bit vector register performance
is roughly 4 times better than Advanced SIMD 128 bit register and 8
times better than scalar 64 bit register by running 'make bench'.
[1] https://github.com/fujitsu/A64FX
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Reviewed-by: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
This patch is a test helper script to change Vector Length for child
process. This script can be used as test-wrapper for 'make check'.
Usage examples:
~/build$ make check subdirs=string \
test-wrapper='~/glibc/sysdeps/unix/sysv/linux/aarch64/vltest.py 16'
~/build$ ~/glibc/sysdeps/unix/sysv/linux/aarch64/vltest.py 16 \
make test t=string/test-memcpy
~/build$ ~/glibc/sysdeps/unix/sysv/linux/aarch64/vltest.py 32 \
./debugglibc.sh string/test-memmove
~/build$ ~/glibc/sysdeps/unix/sysv/linux/aarch64/vltest.py 64 \
./testrun.sh string/test-memset
Since the variable expands to nothing under Linux, it is no longer
necessary to clutter the makefiles with it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Only the placeholder compatibility symbols are left now.
The __errno_location symbol was removed (moved) using
scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbols were moved using scripts/move-symbol-to-libc.py.
The libpthread placeholder symbols need some changes because some
symbol versions have gone away completely. But
__errno_location@@GLIBC_2.0 still exists, so the GLIBC_2.0 version
is still there.
The internal __pthread_create symbol now points to the correct
function, so the sysdeps/nptl/thrd_create.c override is no longer
necessary.
There was an issue how the hidden alias of pthread_getattr_default_np
was defined, so this commit cleans up that aspects and removes the
GLIBC_PRIVATE export altogether.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The tst-timespec_getres (e5ac7bd679) triggers an issue on 32-bit
architecture on Linux older than 5.1, where the fallback syscall
is used.
Checked on powerpc-linux-gnu.
ISO C2X adds a timespec_getres function alongside the C11
timespec_get, with functionality similar to that of POSIX clock_getres
(including allowing a NULL pointer to be passed to the function).
Implement this function for glibc, similarly to the implementation of
timespec_get.
This includes a basic test like that of timespec_get, but no
documentation in the manual, given that TIME_UTC and timespec_get
aren't documented in the manual at all. The handling of 64-bit time
follows that in timespec_get; people maintaining patch series for
64-bit time will need to update them accordingly (to export
__timespec_getres64, redirect calls in time.h and run the test for
_TIME_BITS=64).
Tested for x86_64 and x86, and (previous version; only testcase
differs) with build-many-glibcs.py.
The symbol was moved using scripts/move-symbol-to-libc.py.
The GLIBC_2.11 version is now empty, so add a placeholder symbol.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
The GLIBC_2.3.4 version is now empty, so add a placeholder symbol.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
Add __libpthread_version_placeholder@@GLIBC_2.12 for the targets
that need it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
__libpthread_version_placeholder@@GLIBC_2.2 is needed by this change;
the Versions entry for GLIBC_2.2 in libpthread had leftover symbols
due to an error in a previous conflict resolution. The condition
for the placeholder symbol is complicated because some architectures
have earlier symbols at the GLIBC_2.2 symbol versions, so the
placeholder is not required there (yet).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
A new placeholder symbol __libpthread_version_placeholder@GLIBC_2.18
is needed to keep the GLIBC_2.18 symbol version in libpthread.
The __pthread_getattr_default_np@@GLIBC_PRIVATE export is used
from pthread_create.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The error paths of __check_native would leave the socket FD open on
return, resulting in an FD leak. Rework function exit paths so that
the fd is always closed on return.
The symbols were moved using scripts/move-symbol-to-libc.py,
in one commit due to their dependency on the internal
__concurrency_level variable.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbols were moved using scripts/move-symbol-to-libc.py.
Also clean up some unwinder linking leftover in the same spot
in nptl/pthreadP.h.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
It is necessary to arrange for a
__libpthread_version_placeholder@GLIBC_2.6 on some of the powerpc
targets.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbols pthread_clockjoin_np, pthread_join, pthread_timedjoin_np,
pthread_tryjoin_np, thrd_join were moved using
scripts/move-symbol-to-libc.py.
Moving the symbols at the same time avoids the need for temporary
exports.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
The export of __default_pthread_attr_freeres is temporary. There
is a minor regression in freeres coverage because in the dynamic case,
__default_pthread_attr_freeres is no longer called if libpthread is
not linked in.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The nptl version is used as default, since now with symbol always
present the single-thread optimization is tricky.
Hurd is not change, it is used it own lock scheme (which call
_cthreads_funlockfile).
Checked on x86_64-linux-gnu.
The nptl version is used as default, since now with symbol always
present the single-thread optimization is tricky.
Hurd is not change, it is used it own lock scheme (which call
_cthreads_ftrylockfile).
Checked on x86_64-linux-gnu.
The nptl version is used as default, since now with symbol always
present the single-thread optimization is tricky.
Hurd is not change, it is used it own lock scheme (which call
_cthreads_flockfile).
Checked on x86_64-linux-gnu.
Linux 5.12 adds the constants PTRACE_SYSEMU and
PTRACE_SYSEMU_SINGLESTEP for s390. Add these to glibc.
Tested with build-many-glibcs.py for s390-linux-gnu and
s390x-linux-gnu.
All the stack lists are now in _rtld_global, so it is possible
to change stack permissions directly from there, instead of
calling into libpthread to do the change.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Always use __libc_multiple_threads if beneficial, and do not assume
the the dynamic loader is single-threaded. This assumption could
become incorrect by accident once more code is moved from libpthread
into it. The previous commit introducing the
NO_SYSCALL_CANCEL_CHECKING macro enables this change.
Do not hint to the compiler that multi-threaded programs are unlikely
(which is not quite true anymore).
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Historically, SINGLE_THREAD_P is defined to 1 in the dynamic loader.
This has the side effect of disabling cancellation points. In order
to enable future use of SINGLE_THREAD_P for single-thread
optimizations in the dynamic loader (which becomes important once
more code is moved from libpthread), introduce a new
NO_SYSCALL_CANCEL_CHECKING macro which is always 1 for IS_IN (rtld),
indepdently of the actual SINGLE_THREAD_P value.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This allows the elimination of the __libc_multiple_threads_ptr
variable in libpthread and its initialization procedure.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Big win in binary size and avoids duplicating the logic in multiple
places.
On x86_64, dropped from 1883206 to 1881790, a 1416 byte decrease.
Also changed logic to track if ttyname_buf has been allocated by
checking if it's NULL instead of tracking buflen as an additional
variable.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Simplifies the logic and makes intent clearer, while at the same time
decreasing binary size.
On x86_64, dropped from 1883270 to 1883206, a 64 byte decrease.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
There is no much gain in fallback to cpuinfo if sysfs is no present,
usually on restricted environment neither will be present. It also
simplifies the code and make all architecture use the sched_getaffinity
as the sysfs fallback.
Checked on sparc64-linux-gnu.
Both the sysfs and procfs parsing (through GET_NPROCS_PARSER) are
removed in favor the syscall. The initial scratch buffer should
fit to most of the common usage (1024 bytes with maps to 8192 CPUs).
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
This change continues the improvements to compile-time out of bounds
checking by decorating more APIs with either attribute access, or by
explicitly providing the array bound in APIs such as tmpnam() that
expect arrays of some minimum size as arguments. (The latter feature
is new in GCC 11.)
The only effects of the attribute and/or the array bound is to check
and diagnose calls to the functions that fail to provide a sufficient
number of elements, and the definitions of the functions that access
elements outside the specified bounds. (There is no interplay with
_FORTIFY_SOURCE here yet.)
Tested with GCC 7 through 11 on x86_64-linux.
The symbol was moved using scripts/move-symbol-to-libc.py.
A small adjust to the sem_unlink implementation is necessary to avoid
a check-localplt failure.
A placeholder symbol to keep the GLIBC_2.1.1 version alive in
libpthread is added with this commit.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbols were moved using move-symbol-to-libc.py.
Both functions are moved at the same time because they depend
on internal functions in sysdeps/pthread/sem_routines.c, which
are moved in this commit as well. Additional hidden prototypes
are required to avoid check-localplt failures.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
A new placeholder version is added at version GLIBC_2.30, to
preserve that version in libpthread.so.0.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Previously, the source file nptl/cancellation.c was compiled multiple
times, for libc, libpthread, librt. This commit switches to a single
implementation, with new __pthread_enable_asynccancel@@GLIBC_PRIVATE,
__pthread_disable_asynccancel@@GLIBC_PRIVATE exports.
The almost-unused CANCEL_ASYNC and CANCEL_RESET macros are replaced
by LIBC_CANCEL_ASYNC and LIBC_CANCEL_ASYNC macros. They call the
__pthread_* functions unconditionally now. The macros are still
needed because shared code uses them; Hurd has different definitions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
A temporary __pthread_testcancel@@GLIBC_PRIVATE export is created
because it is needed by the semaphore implementation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It operates similar to execve and it is is already used to implement
fexecve without requiring /proc to be mounted. However, different
than fexecve, if the syscall is not supported by the kernel an error
is returned instead of trying a fallback.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And deprecate it in <pthread.h>, redirecting it to sched_yield
for the time being.
The symbol was moved using scripts/move-symbol-to-libc.py.
No GLIBC_2.34 symbol version is added because of the compatibility
symbol status.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And __pthread_rwlock_trywrlock as a compatibility symbol.
Remove the unused __libc_rwlock_trywrlock macro.
The symbols were moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And __pthread_rwlock_tryrdlock as a compatibility symbol.
Remove the unused __libc_rwlock_tryrdlock macro.
The symbols were moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
