The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper
with SVID error handling around the new code. There is no new symbol
version nor compatibility code on !LIBM_SVID_COMPAT targets
(e.g. riscv).
The ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation. For both i686 and m68k,
which provive arch specific implementation, wrappers are added so
no new symbol are added (which would require to change the
implementations).
It shows an small improvement, the results for fmod:
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 12.5049 | 9.40992
x86_64 (Ryzen 9) | normal | 296.939 | 296.738
x86_64 (Ryzen 9) | close-exponents | 16.0244 | 13.119
aarch64 (N1) | subnormal | 6.81778 | 4.33313
aarch64 (N1) | normal | 155.620 | 152.915
aarch64 (N1) | close-exponents | 8.21306 | 5.76138
armhf (N1) | subnormal | 15.1083 | 14.5746
armhf (N1) | normal | 244.833 | 241.738
armhf (N1) | close-exponents | 21.8182 | 22.457
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants for the %i scanf format (in addition to the %b format,
which isn't yet implemented for scanf in glibc). Implement that scanf
support for glibc.
As with the strtol support, this is incompatible with previous C
standard versions, in that such an input string starting with 0b or 0B
was previously required to be parsed as 0 (with the rest of the input
potentially matching subsequent parts of the scanf format string).
Thus this patch adds 12 new __isoc23_* functions per long double
format (12, 24 or 36 depending on how many long double formats the
glibc configuration supports), with appropriate header redirection
support (generally very closely following that for the __isoc99_*
scanf functions - note that __GLIBC_USE (DEPRECATED_SCANF) takes
precedence over __GLIBC_USE (C2X_STRTOL), so the case of GNU
extensions to C89 continues to get old-style GNU %a and does not get
this new feature). The function names would remain as __isoc23_* even
if C2x ends up published in 2024 rather than 2023.
When scanf %b support is added, I think it will be appropriate for all
versions of scanf to follow C2x rules for inputs to the %b format
(given that there are no compatibility concerns for a new format).
Tested for x86_64 (full glibc testsuite). The first version was also
tested for powerpc (32-bit) and powerpc64le (stdio-common/ and wcsmbs/
tests), and with build-many-glibcs.py.
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And remove redundant entries on other architectures Version. The
version for fallocate64 was supposed to be 2.10, but it was then
added to 32-bit platforms in 2.11 because it mistakenly wasn't
exported for them in 2.10 (see the commit message for
1f3615a1c9).
The linux/generic did not exist before 2.15, i.e. when the tile
ports were added (and microblaze did not exist before 2.18), which
explains those differences but also illustrates that "2.11 for 32-bit,
2.10 for 64-bit" should be sufficient since versions older than the
minimum for the architecture are automatically adjusted.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants in strtol-family functions when the base passed is 0
or 2. Implement that strtol support for glibc.
As discussed at
<https://sourceware.org/pipermail/libc-alpha/2020-December/120414.html>,
this is incompatible with previous C standard versions, in that such
an input string starting with 0b or 0B was previously required to be
parsed as 0 (with the rest of the string unprocessed). Thus, as
proposed there, this patch adds 20 new __isoc23_* functions with
appropriate header redirection support. This patch does *not* do
anything about scanf %i (which will need 12 new functions per long
double variant, so 12, 24 or 36 depending on the glibc configuration),
instead leaving that for a future patch. The function names would
remain as __isoc23_* even if C2x ends up published in 2024 rather than
2023.
Making this change leads to the question of what should happen to
internal uses of these functions in glibc and its tests. The header
redirection (which applies for _GNU_SOURCE or any other feature test
macros enabling C2x features) has the effect of redirecting internal
uses but without those uses then ending up at a hidden alias (see the
comment in include/stdio.h about interaction with libc_hidden_proto).
It seems desirable for the default for internal uses to be the same
versions used by normal code using _GNU_SOURCE, so rather than doing
anything to disable that redirection, similar macro definitions to
those in include/stdio.h are added to the include/ headers for the new
functions.
Given that the default for uses in glibc is for the redirections to
apply, the next question is whether the C2x semantics are correct for
all those uses. Uses with the base fixed to 10, 16 or any other value
other than 0 or 2 can be ignored. I think this leaves the following
internal uses to consider (an important consideration for review of
this patch will be both whether this list is complete and whether my
conclusions on all entries in it are correct):
benchtests/bench-malloc-simple.c
benchtests/bench-string.h
elf/sotruss-lib.c
math/libm-test-support.c
nptl/perf.c
nscd/nscd_conf.c
nss/nss_files/files-parse.c
posix/tst-fnmatch.c
posix/wordexp.c
resolv/inet_addr.c
rt/tst-mqueue7.c
soft-fp/testit.c
stdlib/fmtmsg.c
support/support_test_main.c
support/test-container.c
sysdeps/pthread/tst-mutex10.c
I think all of these places are OK with the new semantics, except for
resolv/inet_addr.c, where the POSIX semantics of inet_addr do not
allow for binary constants; thus, I changed that file (to use
__strtoul_internal, whose semantics are unchanged) and added a test
for this case. In the case of posix/wordexp.c I think accepting
binary constants is OK since POSIX explicitly allows additional forms
of shell arithmetic expressions, and in stdlib/fmtmsg.c SEV_LEVEL is
not in POSIX so again I think accepting binary constants is OK.
Functions such as __strtol_internal, which are only exported for
compatibility with old binaries from when those were used in inline
functions in headers, have unchanged semantics; the __*_l_internal
versions (purely internal to libc and not exported) have a new
argument to specify whether to accept binary constants.
As well as for the standard functions, the header redirection also
applies to the *_l versions (GNU extensions), and to legacy functions
such as strtoq, to avoid confusing inconsistency (the *q functions
redirect to __isoc23_*ll rather than needing their own __isoc23_*
entry points). For the functions that are only declared with
_GNU_SOURCE, this means the old versions are no longer available for
normal user programs at all. An internal __GLIBC_USE_C2X_STRTOL macro
is used to control the redirections in the headers, and cases in glibc
that wish to avoid the redirections - the function implementations
themselves and the tests of the old versions of the GNU functions -
then undefine and redefine that macro to allow the old versions to be
accessed. (There would of course be greater complexity should we wish
to make any of the old versions into compat symbols / avoid them being
defined at all for new glibc ABIs.)
strtol_l.c has some similarity to strtol.c in gnulib, but has already
diverged some way (and isn't listed at all at
https://sourceware.org/glibc/wiki/SharedSourceFiles unlike strtoll.c
and strtoul.c); I haven't made any attempts at gnulib compatibility in
the changes to that file.
I note incidentally that inttypes.h and wchar.h are missing the
__nonnull present on declarations of this family of functions in
stdlib.h; I didn't make any changes in that regard for the new
declarations added.
The generic (sysdeps/unix/sysv/linux/generic/bits/typesizes.h) and
default (bits/typesizes.h) differs in two fields:
bits/typesizes.h Linux generic
__NLINK_T_TYPE __UWORD_TYPE __U32_TYPE
__BLKSIZE_T_TYPE __SLONGWORD_TYPE __S32_TYPE
Sinceit leads to different C++ mangling names, the default typesize.h
is copied for the requires archtiectures and the generic is make the
default Linux one.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Similar to ppoll, the poll.h header needs to redirect the poll call
to a proper fortified ppoll with 64 bit time_t support.
The implementation is straightforward, just need to add a similar
check as __poll_chk and call the 64 bit time_t ppoll version. The
debug fortify tests are also extended to cover 64 bit time_t for
affected ABIs.
Unfortunately it requires an aditional symbol, which makes backport
tricky. One possibility is to add a static inline version if compiler
supports is and call abort instead of __chk_fail, so fortified version
will call __poll64 in the end.
Another possibility is to just remove the fortify support for
_TIME_BITS=64.
Checked on i686-linux-gnu.
The old exception handling implementation used function interposition
to replace the dynamic loader implementation (no TLS support) with the
libc implementation (TLS support). This results in problems if the
link order between the dynamic loader and libc is reversed (bug 25486).
The new implementation moves the entire implementation of the
exception handling functions back into the dynamic loader, using
THREAD_GETMEM and THREAD_SETMEM for thread-local data support.
These depends on Hurd support for these macros, added in commit
b65a82e4e7 ("hurd: Add THREAD_GET/SETMEM/_NC").
One small obstacle is that the exception handling facilities are used
before the TCB has been set up, so a check is needed if the TCB is
available. If not, a regular global variable is used to store the
exception handling information.
Also rename dl-error.c to dl-catch.c, to avoid confusion with the
dlerror function.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This allows us to define a generic no-op version of PTR_MANGLE and
PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE
unconditionally in C sources, avoiding an unintended loss of hardening
due to missing include files or unlucky header inclusion ordering.
In i386 and x86_64, we can avoid a <tls.h> dependency in the C
code by using the computed constant from <tcb-offsets.h>. <sysdep.h>
no longer includes these definitions, so there is no cyclic dependency
anymore when computing the <tcb-offsets.h> constants.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It avoid a possible compiler warning where right size of operator
is converted from a negative value to unsigned.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
A new internal definition, __LIBC_LOCK_ALIGNMENT, is used to force
the 4-byte alignment only for m68k, other architecture keep the
natural alignment of the type used internally (and hppa does not
require 16-byte alignment for kernel-assisted CAS).
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The older libc versions are obsolete for over twenty years now.
This patch removes the special flags for libc5 and libc4 and assumes
that all libraries cached are libc6 compatible and use FLAG_ELF_LIBC6.
Checked with a build for all affected architectures.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The implementation is based on scalar Chacha20 with per-thread cache.
It uses getrandom or /dev/urandom as fallback to get the initial entropy,
and reseeds the internal state on every 16MB of consumed buffer.
To improve performance and lower memory consumption the per-thread cache
is allocated lazily on first arc4random functions call, and if the
memory allocation fails getentropy or /dev/urandom is used as fallback.
The cache is also cleared on thread exit iff it was initialized (so if
arc4random is not called it is not touched).
Although it is lock-free, arc4random is still not async-signal-safe
(the per thread state is not updated atomically).
The ChaCha20 implementation is based on RFC8439 [1], omitting the final
XOR of the keystream with the plaintext because the plaintext is a
stream of zeros. This strategy is similar to what OpenBSD arc4random
does.
The arc4random_uniform is based on previous work by Florian Weimer,
where the algorithm is based on Jérémie Lumbroso paper Optimal Discrete
Uniform Generation from Coin Flips, and Applications (2013) [2], who
credits Donald E. Knuth and Andrew C. Yao, The complexity of nonuniform
random number generation (1976), for solving the general case.
The main advantage of this method is the that the unit of randomness is not
the uniform random variable (uint32_t), but a random bit. It optimizes the
internal buffer sampling by initially consuming a 32-bit random variable
and then sampling byte per byte. Depending of the upper bound requested,
it might lead to better CPU utilization.
Checked on x86_64-linux-gnu, aarch64-linux, and powerpc64le-linux-gnu.
Co-authored-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
[1] https://datatracker.ietf.org/doc/html/rfc8439
[2] https://arxiv.org/pdf/1304.1916.pdf
This change provides implementations for the mbrtoc8 and c8rtomb
functions adopted for C++20 via WG21 P0482R6 and for C2X via WG14
N2653. It also provides the char8_t typedef from WG14 N2653.
The mbrtoc8 and c8rtomb functions are declared in uchar.h in C2X
mode or when the _GNU_SOURCE macro or C++20 __cpp_char8_t feature
test macro is defined.
The char8_t typedef is declared in uchar.h in C2X mode or when the
_GNU_SOURCE macro is defined and the C++20 __cpp_char8_t feature
test macro is not defined (if __cpp_char8_t is defined, then char8_t
is a builtin type).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It was added on Linux 5.12 (2a1867219c7b27f928e2545782b86daaf9ad50bd)
to allow change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (a07b20004793d8926f78d63eb5980559f7813404)
to return a O_PATH-opened file descriptor to an existing mountpoint.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (cf3cba4a429be43e5527a3f78859b1bfd9ebc5fb)
that can be used to pick an existing mountpoint into an filesystem
context which can thereafter be used to reconfigure a superblock
with fsconfig syscall.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (ecdab150fddb42fe6a739335257949220033b782)
as a way to a configure filesystem creation context and trigger
actions upon it, to be used in conjunction with fsopen, fspick and
fsmount.
The fsconfig_command commands are currently only defined as an enum,
so they can't be checked on tst-mount-consts.py with current test
support.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (2db154b3ea8e14b04fee23e3fdfd5e9d17fbc6ae)
as way t move a mount from one place to another and, in the next
commit, allow to attach an unattached mount tree.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on 5.2 (93766fbd2696c2c4453dd8e1070977e9cd4e6b6d) to
provide a way by which a filesystem opened with fsopen and configured
by a series of fsconfig calls can have a detached mount object
created for it.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (24dcb3d90a1f67fe08c68a004af37df059d74005)
to start the process of preparing to create a superblock that will
then be mountable, using an fd as a context handle.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Added in Linux 5.15 (884a7e5964e06ed93c7771c0d7cf19c09a8946f1), the new
syscalls allows a caller to free the memory of a dying target process.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.10 (ecb8ac8b1f146915aa6b96449b66dd48984caacc)
with the same functionality as madvise but using a pidfd of the target
process.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.1(3eb39f47934f9d5a3027fe00d906a45fe3a15fad)
as a way to avoid the race condition of using kill (where PID might be
reused by the kernel between between obtaining the pid and sending the
signal).
If the siginfo_t argument is NULL then pidfd_send_signal is equivalent
to kill. If it is not NULL pidfd_send_signal is equivalent to
rt_sigqueueinfo.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.6 (8649c322f75c96e7ced2fec201e123b2b073bf09)
as a way to retrieve a file descriptors for another process though
pidfd (created either with CLONE_PIDFD or pidfd_getfd). The
functionality is similar to recvmmsg SCM_RIGHTS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.3 (32fcb426ec001cb6d5a4a195091a8486ea77e2df)
as a way to retrieve a pid file descriptors for process that has not
been created CLONE_PIDFD (by usual fork/clone).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The Linux version used by i686 and m68k provide three overrrides for
generic code:
1. DISTINGUISH_LIB_VERSIONS to print additional information when
libc5 is used by a dependency.
2. EXTRA_LD_ENVVARS to that enabled LD_LIBRARY_VERSION environment
variable.
3. EXTRA_UNSECURE_ENVVARS to add two environment variables related
to aout support.
None are really requires, it has some decades since libc5 or aout
suppported was removed and Linux even remove support for aout files.
The LD_LIBRARY_VERSION is also dead code, dl_correct_cache_id is not
used anywhere.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Linux 5.17 has one new syscall, set_mempolicy_home_node. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
The posix_spawnattr_tcsetpgrp_np works on a file descriptor (the
controlling terminal), so it would make more sense to actually fit
it on the file actions API.
Also, POSIX_SPAWN_TCSETPGROUP is not really required since it is
implicit by the presence of tcsetpgrp file action.
The posix/tst-spawn6.c is also fixed when TTY can is not present.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The glibc 2.34 release really should have added a GLIBC_2.34
symbol to the dynamic loader. With it, we could move functions such
as dlopen or pthread_key_create that work on process-global state
into the dynamic loader (once we have fixed a longstanding issue
with static linking). Without the GLIBC_2.34 symbol, yet another
new symbol version would be needed because old glibc will fail to
load binaries due to the missing symbol version in ld.so that newly
linked programs will require.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Currently there is no proper way to set the controlling terminal through
posix_spawn in race free manner [1]. This forces shell implementations
to keep using fork+exec when launching background process groups,
even when using posix_spawn yields better performance.
This patch adds a new GNU extension so the creating process can
configure the created process terminal group. This is done with a new
flag, POSIX_SPAWN_TCSETPGROUP, along with two new attribute functions:
posix_spawnattr_tcsetpgrp_np, and posix_spawnattr_tcgetpgrp_np.
The function sets a new attribute, spawn-tcgroupfd, that references to
the controlling terminal.
The controlling terminal is set after the spawn-pgroup attribute, and
uses the spawn-tcgroupfd along with current creating process group
(so it is composable with POSIX_SPAWN_SETPGROUP).
To create a process and set the controlling terminal, one can use the
following sequence:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
If the idea is also to create a new process groups:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP
| POSIX_SPAWN_SETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
posix_spawnattr_setpgroup (&attr, 0);
The controlling terminal file descriptor is ignored if the new flag is
not set.
This interface is slight different than the one provided by QNX [2],
which only provides the POSIX_SPAWN_TCSETPGROUP flag. The QNX
documentation does not specify how the controlling terminal is obtained
nor how it iteracts with POSIX_SPAWN_SETPGROUP. Since a glibc
implementation is library based, it is more straightforward and avoid
requires additional file descriptor operations to request the caller
to setup the controlling terminal file descriptor (and it also allows
a bit less error handling by posix_spawn).
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://github.com/ksh93/ksh/issues/79
[2] https://www.qnx.com/developers/docs/7.0.0/index.html#com.qnx.doc.neutrino.lib_ref/topic/p/posix_spawn.html
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It is similar to epoll_wait, with the difference the timeout has
nanosecond resoluting by using struct timespec instead of int.
Although Linux interface only provides 64 bit time_t support, old
32 bit interface is also provided (so keep in sync with current
practice and to no force opt-in on 64 bit time_t).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Linux 5.16 has one new syscall, futex_waitv. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Trapping SIGSEGV within the process is error-prone, adds security
issues, and modern analysis design tends to happen out of the
process (either by attaching a debugger or by post-mortem analysis).
The libSegfault also has some design problems, it uses non
async-signal-safe function (backtrace) on signal handler.
There are multiple alternatives if users do want to use similar
functionality, such as sigsegv gnulib module or libsegfault.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
It can be used to speed up the libgcc unwinder, and the internal
_dl_find_dso_for_object function (which is used for caller
identification in dlopen and related functions, and in dladdr).
_dl_find_object is in the internal namespace due to bug 28503.
If libgcc switches to _dl_find_object, this namespace issue will
be fixed. It is located in libc for two reasons: it is necessary
to forward the call to the static libc after static dlopen, and
there is a link ordering issue with -static-libgcc and libgcc_eh.a
because libc.so is not a linker script that includes ld.so in the
glibc build tree (so that GCC's internal -lc after libgcc_eh.a does
not pick up ld.so).
It is necessary to do the i386 customization in the
sysdeps/x86/bits/dl_find_object.h header shared with x86-64 because
otherwise, multilib installations are broken.
The implementation uses software transactional memory, as suggested
by Torvald Riegel. Two copies of the supporting data structures are
used, also achieving full async-signal-safety.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper with
SVID error handling around the new code. There is no new symbol version
nor compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
Only ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
The relationship between the thread pointer and the rseq area
is made explicit. The constant offset can be used by JIT compilers
to optimize rseq access (e.g., for really fast sched_getcpu).
Extensibility is provided through __rseq_size and __rseq_flags.
(In the future, the kernel could request a different rseq size
via the auxiliary vector.)
Co-Authored-By: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The LFS prlimit64 requires a arch-specific implementation in
syscalls.list. Instead add a generic one that handles the
required symbol alias for __RLIM_T_MATCHES_RLIM64_T.
HPPA is the only outlier which requires a different default
symbol.
Checked on x86_64-linux-gnu and with build for the affected ABIs.
