This slightly reduces code size, as can be seen below.
__libc_lock_unlock is usually used along with __libc_lock_lock in
the same function. __libc_lock_lock already has an out-of-line
slow path, so this change should not introduce many additional
non-leaf functions.
This change also fixes a link failure in 32-bit Arm thumb mode
because commit 1f9c804fbd
("nptl: Use internal low-level lock type for !IS_IN (libc)")
introduced __libc_do_syscall calls outside of libc.
Before x86-64:
text data bss dec hex filename
1937748 20456 54896 2013100 1eb7ac libc.so.6
25601 856 12768 39225 9939 nss/libnss_db.so.2
40310 952 25144 66406 10366 nss/libnss_files.so.2
After x86-64:
text data bss dec hex filename
1935312 20456 54896 2010664 1eae28 libc.so.6
25559 864 12768 39191 9917 nss/libnss_db.so.2
39764 960 25144 65868 1014c nss/libnss_files.so.2
Before i686:
2110961 11272 39144 2161377 20fae1 libc.so.6
27243 428 12652 40323 9d83 nss/libnss_db.so.2
43062 476 25028 68566 10bd6 nss/libnss_files.so.2
After i686:
2107347 11272 39144 2157763 20ecc3 libc.so.6
26929 432 12652 40013 9c4d nss/libnss_db.so.2
43132 480 25028 68640 10c20 nss/libnss_files.so.2
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The remaining symbols are mostly used by libthread_db.
__pthread_get_minstack has to remain exported even though unused.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Now that there are no internal users anymore, these new symbol
versions can be removed from the public ABI. The compatibility
symbols remain.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The valgrind/helgrind test suite needs a way to make stack dealloction
more prompt, and this feature seems to be generally useful.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This allows distributions to strip debugging information from
libc.so.6 without impacting the debugging experience.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
librt.so is no longer installed for PTHREAD_IN_LIBC, and tests
are not linked against it. $(librt) is introduced globally for
shared tests that need to be linked for both PTHREAD_IN_LIBC
and !PTHREAD_IN_LIBC.
GLIBC_PRIVATE symbols that were needed during the transition are
removed again.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This commit also moves the aio_misc and aio_sigquue helper,
so GLIBC_PRIVATE exports need to be added.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The pthread_atfork is similar between Linux and Hurd, only the compat
version bits differs. The generic version is place at sysdeps/pthread
with a common name.
It also fixes an issue with Hurd license, where the static-only object
did not use LGPL + exception.
Checked on x86_64-linux-gnu, i686-linux-gnu, and with a build for
i686-gnu.
The usage of signals to implementation pthread cancellation is an
implementation detail and should not be visible through cancellation
entrypoints.
However now that pthread_cancel always send the SIGCANCEL, some
entrypoint might be interruptable and return EINTR to the caller
(for instance on sem_wait).
Using SA_RESTART hides this, since the cancellation handler should
either act uppon cancellation (if asynchronous cancellation is enable)
or ignore the cancellation internal signal.
Checked on x86_64-linux-gnu and i686-linux-gnu.
The (private) symbols __pthread_clock_gettime, __pthread_clock_settime and
__pthread_initialize_minimal haven't been defined by libpthread for some
time.
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
This mirrors the situation on Hurd. These directories are on
the include search part, so #include <pthreadP.h> works after this
change on both Hurd and nptl.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These were turned into compat symbols as part of the libpthread
move. It turns out they are used by language run-time libraries
(e.g., the GCC D front end), so it makes to preserve them as
external symbols even though they are not declared in any header
file.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
A new build flag, _TIME_BITS, enables the usage of the newer 64-bit
time symbols for legacy ABI (where 32-bit time_t is default). The 64
bit time support is only enabled if LFS (_FILE_OFFSET_BITS=64) is
also used.
Different than LFS support, the y2038 symbols are added only for the
required ABIs (armhf, csky, hppa, i386, m68k, microblaze, mips32,
mips64-n32, nios2, powerpc32, sparc32, s390-32, and sh). The ABIs with
64-bit time support are unchanged, both for symbol and types
redirection.
On Linux the full 64-bit time support requires a minimum of kernel
version v5.1. Otherwise, the 32-bit fallbacks are used and might
results in error with overflow return code (EOVERFLOW).
The i686-gnu does not yet support 64-bit time.
This patch exports following rediretions to support 64-bit time:
* libc:
adjtime
adjtimex
clock_adjtime
clock_getres
clock_gettime
clock_nanosleep
clock_settime
cnd_timedwait
ctime
ctime_r
difftime
fstat
fstatat
futimens
futimes
futimesat
getitimer
getrusage
gettimeofday
gmtime
gmtime_r
localtime
localtime_r
lstat_time
lutimes
mktime
msgctl
mtx_timedlock
nanosleep
nanosleep
ntp_gettime
ntp_gettimex
ppoll
pselec
pselect
pthread_clockjoin_np
pthread_cond_clockwait
pthread_cond_timedwait
pthread_mutex_clocklock
pthread_mutex_timedlock
pthread_rwlock_clockrdlock
pthread_rwlock_clockwrlock
pthread_rwlock_timedrdlock
pthread_rwlock_timedwrlock
pthread_timedjoin_np
recvmmsg
sched_rr_get_interval
select
sem_clockwait
semctl
semtimedop
sem_timedwait
setitimer
settimeofday
shmctl
sigtimedwait
stat
thrd_sleep
time
timegm
timerfd_gettime
timerfd_settime
timespec_get
utime
utimensat
utimes
utimes
wait3
wait4
* librt:
aio_suspend
mq_timedreceive
mq_timedsend
timer_gettime
timer_settime
* libanl:
gai_suspend
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The testcase provided on BZ#19366 may update __nptl_nthreads in a wrong
order, triggering an early process exit because the thread decrement
the value twice.
The issue is once the thread exits without acting on cancellation,
it decreaments '__nptl_nthreads' and then atomically set
'cancelhandling' with EXITING_BIT (thus preventing further cancellation
handler to act). The issue happens if a SIGCANCEL is received between
checking '__ntpl_nthreads' and setting EXITING_BIT. To avoid it, the
'__nptl_nthreads' decrement is moved after EXITING_BIT.
It does fully follow the POSIX XSH 2.9.5 Thread Cancellation under
the heading Thread Cancellation Cleanup Handlers that states that
when a cancellation request is acted upon, or when a thread calls
pthread_exit(), the thread first disables cancellation by setting its
cancelability state to PTHREAD_CANCEL_DISABLE and its cancelability type
to PTHREAD_CANCEL_DEFERRED. The issue is '__pthread_enable_asynccancel'
explicit enabled assynchrnous cancellation, so an interrupted syscall
within the cancellation cleanup handlers might see an invalid cancelling
type (a possible fix might be possible with my proposed solution to
BZ#12683).
Trying to come up with a test is quite hard since it requires to
mimic the timing issue described below, however I see that the
bug report reproducer does not early exit anymore.
Checked on x86_64-linux-gnu.
It consolidates the tgkill call and it is the first step of making
pthread_cancel async-signal-safe. It also fix a possible issue
where the 'struct pthread' tid is not read atomically, which might
send an invalid cancellation signal (similar to what
db988e50a8 fixed for pthread_join).
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Now that pthread_kill is provided by libc.so it is possible to
implement the generic POSIX implementation as
'pthread_kill(pthread_self(), sig)'.
For Linux implementation, pthread_kill read the targeting TID from
the TCB. For raise, this it not possible because it would make raise
fail when issue after vfork (where creates the resulting process
has a different TID from the parent, but its TCB is not updated as
for pthread_create). To make raise use pthread_kill, it is make
usable from vfork by getting the target thread id through gettid
syscall.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Now that the thread cancellation type is not accessed concurrently
anymore, it is possible to move it out the cancelhandling.
By removing the cancel state out of the internal thread cancel handling
state there is no need to check if cancelled bit was set in CAS
operation.
It allows simplifing the cancellation wrappers and the
CANCEL_CANCELED_AND_ASYNCHRONOUS is removed.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Now that thread cancellation state is not accessed concurrently anymore,
it is possible to move it out the 'cancelhandling'.
The code is also simplified: CANCELLATION_P is replaced with a
internal pthread_testcancel call and the CANCELSTATE_BIT{MASK} is
removed.
With this behavior pthread_setcancelstate does not require to act on
cancellation if cancel type is asynchronous (is already handled either
by pthread_setcanceltype or by the signal handler).
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
The CANCELING_BITMASK is used as an optimization to avoid sending
the signal when pthread_cancel is called in a concurrent manner.
This requires then to put both the cancellation state and type on a
shared state (cancelhandling), since 'pthread_cancel' checks whether
cancellation is enabled and asynchrnous to either cancel itself of
sending the signal.
It also requires handle the CANCELING_BITMASK on
__pthread_disable_asynccancel, however this incurs in the same issues
described on BZ#12683: the cancellation is acted upon even *after*
syscall returns with user visible side-effects.
This patch removes this optimization and simplifies the pthread
cancellation implementation: pthread_cancel now first checks if
cancellation is already pending and if not always, sends a signal
if the target is not itself. The SIGCANCEL handler is also simpified
since there is not need to setup a CAS loop.
It also allows to move both the cancellation state and mode out of
'cancelhadling' (it is done in subsequent patches).
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Now that cancellation is not used anymore to handle thread setup
creation failure, the sighandle can be installed only when
pthread_cancel is actually used.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
To setup either the thread scheduling parameters or affinity,
pthread_create enforce synchronization on created thread to wait until
its parent either release PD ownership or send a cancellation signal if
a failure occurs.
However, cancelling the thread does not deallocate the newly created
stack since cancellation expects that a pthread_join to deallocate any
allocated thread resouces (threads stack or TLS).
This patch changes on how the thread resource is deallocate in case of
failure to be synchronous, where the creating thread will signal the
created thread to exit early so it could be joined. The creating thread
will be reponsible for the resource cleanup before returning to the
caller.
To signal the creating thread that a failure has occured, an unused
'struct pthread' member, parent_cancelhandling_unsed, now indicates
whether the setup has failed so creating thread can proper exit.
This strategy also simplifies by not using thread cancellation and
thus not running libgcc_so load in the signal handler (which is
avoided in thread cancellation since 'pthread_cancel' is the one
responsible to dlopen libgcc_s). Another advantage is since the
early exit is move to first step at thread creation, the signal
mask is not already set and thus it can not act on change ID setxid
handler.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
This commit removes the ELF constructor and internal variables from
dlfcn/dlfcn.c. The file now serves the same purpose as
nptl/libpthread-compat.c, so it is renamed to dlfcn/libdl-compat.c.
The use of libdl-shared-only-routines ensures that libdl.a is empty.
This commit adjusts the test suite not to use $(libdl). The libdl.so
symbolic link is no longer installed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some symbols have explicit versioned_symbol or compat_symbol markers
in the sources, but no corresponding entry in the Versions files.
This presently works because the local: * directive is only applied
to the base version.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It checks whether an invalid affinity mask does return an error,
similar to what sysdeps/pthread/tst-bad-schedattr.c does for
pthread_attr_setschedparam.
Checked on x86_64-linux-gnu.
The 'create_thread' function is moved to pthread_create.c. It removes
the START_THREAD_DEFN and START_THREAD_SELF macros and make the
lock usage more clear (no need to cross-reference multiple files).
No functional change.
The signal is sent to all threads, some of which may have switched
to very small stacks. If they have also installed an alternate
signal stack, SA_ONSTACK makes this work. The Go runtime needs this:
runtime: C.setuid/C.setgid smashes Go stack
<https://github.com/golang/go/issues/9400>
Doing this for SIGCANCEL is less obviously beneficial and needs further
testing.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since the variable expands to nothing under Linux, it is no longer
necessary to clutter the makefiles with it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Only the placeholder compatibility symbols are left now.
The __errno_location symbol was removed (moved) using
scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbols were moved using scripts/move-symbol-to-libc.py.
The libpthread placeholder symbols need some changes because some
symbol versions have gone away completely. But
__errno_location@@GLIBC_2.0 still exists, so the GLIBC_2.0 version
is still there.
The internal __pthread_create symbol now points to the correct
function, so the sysdeps/nptl/thrd_create.c override is no longer
necessary.
There was an issue how the hidden alias of pthread_getattr_default_np
was defined, so this commit cleans up that aspects and removes the
GLIBC_PRIVATE export altogether.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
No abilist updates here because it is a GLIBC_PRIVATE symbol.
It's also necessary to move nptl_version into pthread_create, so
that it still ends up in static binaries.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use the __nptl_tls_static_size_for_stack inline function instead,
and the GLRO (dl_tls_static_align) value directly.
The computation of GLRO (dl_tls_static_align) in
_dl_determine_tlsoffset ensures that the alignment is at least
TLS_TCB_ALIGN, which at least STACK_ALIGN (see allocate_stack).
Therefore, the additional rounding-up step is removed.
ALso move the initialization of the default stack size from
__pthread_initialize_minimal_internal to __pthread_early_init.
This introduces an extra system call during single-threaded startup,
but this simplifies the initialization sequence. No locking is
needed around the writes to __default_pthread_attr because the
process is single-threaded at this point.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Install signal handlers and unblock signals before pthread_create
creates the first thread.
create_thread in sysdeps/unix/sysv/linux/createthread.c can send
SIGCANCEL to the current thread, so the SIGCANCEL handler is currently
needed even if pthread_cancel is never called. (The way timer_create
uses SIGCANCEL does not need a signal handler; both SIG_DFL and SIG_IGN
dispositions should work.)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
The GLIBC_2.11 version is now empty, so add a placeholder symbol.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
The GLIBC_2.3.4 version is now empty, so add a placeholder symbol.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
Add __libpthread_version_placeholder@@GLIBC_2.12 for the targets
that need it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
__libpthread_version_placeholder@@GLIBC_2.2 is needed by this change;
the Versions entry for GLIBC_2.2 in libpthread had leftover symbols
due to an error in a previous conflict resolution. The condition
for the placeholder symbol is complicated because some architectures
have earlier symbols at the GLIBC_2.2 symbol versions, so the
placeholder is not required there (yet).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbol was moved using scripts/move-symbol-to-libc.py.
A new placeholder symbol __libpthread_version_placeholder@GLIBC_2.18
is needed to keep the GLIBC_2.18 symbol version in libpthread.
The __pthread_getattr_default_np@@GLIBC_PRIVATE export is used
from pthread_create.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In libthread_db, use the exported GLIBC_PRIVATE symbols directly
instead of relying on _thread_db_* variables in libpthread
(which used to be created by the DB_FUNCTION macros).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The initialization of the report_events TCB field is now performed
in __tls_init_tp instead of __pthread_initialize_minimal_internal
(in libpthread).
The events interface is difficult to test because GDB stopped using it
in 2015. The td_thr_get_info change to ignore lookup issues is enough
to support GDB with this change.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is similar to the fix for elf/tst-pldd (2f9046fb05):
it checks ptrace_scope value (values higher than 2 are too restrictive
to allow the test to run) and it rearranges the spawned processes
to make the target process the gdb child.
Checked on x86_64-linux-gnu with ptrace_scope set to 1.
