This makes it more likely that the compiler can compute the strlen
argument in _startup_fatal at compile time, which is required to
avoid a dependency on strlen this early during process startup.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The old exception handling implementation used function interposition
to replace the dynamic loader implementation (no TLS support) with the
libc implementation (TLS support). This results in problems if the
link order between the dynamic loader and libc is reversed (bug 25486).
The new implementation moves the entire implementation of the
exception handling functions back into the dynamic loader, using
THREAD_GETMEM and THREAD_SETMEM for thread-local data support.
These depends on Hurd support for these macros, added in commit
b65a82e4e7 ("hurd: Add THREAD_GET/SETMEM/_NC").
One small obstacle is that the exception handling facilities are used
before the TCB has been set up, so a check is needed if the TCB is
available. If not, a regular global variable is used to store the
exception handling information.
Also rename dl-error.c to dl-catch.c, to avoid confusion with the
dlerror function.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Commit 6e8a0aac2f ("time: Fix overflow itimer tests on 32-bit
systems") changed in_time_t_range to assume a 32-bit time_t. This broke
fstatat on MIPSn64 that was using it with a 64-bit time_t due to
difference between stat and stat64. This commit fix that by adding a
MIPSn64 specific version, which bypasses the EOVERFLOW tests.
Resolves: BZ #29730
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The extension header is two 32bit words and in the last header both
should be 0. There is plenty space in the __reserved area, but it's
better not to write more than we mean to.
The generic Linux struct_stat misses the conditionals to use
bits/struct_stat_time64_helper.h in the __USE_TIME_BITS64 for
architecture that uses __TIMESIZE == 32 (currently csky and nios2).
Since newer ports should not support 32 bit time_t, the generic
implementation should be used as default.
For arm, hppa, and sh a copy of default struct_stat is added,
while for csky and nios a new one based on generic is used, along
with conditionals to use bits/struct_stat_time64_helper.h.
The default struct_stat is also replaced with the generic one.
Checked on aarch64-linux-gnu and arm-linux-gnueabihf.
Linux 6.0 adds a constant ADDRB, a termios c_cflag bit, to its
include/uapi/asm-generic/termbits-common.h.
Add it accordingly to glibc's bits/termios-c_cflag.h headers. As
other constants in these headers are generally in octal, I converted
the value to octal to match. As ADDRB isn't in a POSIX-reserved
namespace, I made it conditional on __USE_MISC.
Tested for x86_64.
The current macros uses pid as signed value, which triggers a compiler
warning for process and thread timers. Replace MAKE_PROCESS_CPUCLOCK
with static inline function that expects the pid as unsigned. These
are similar to what Linux does internally.
Checked on x86_64-linux-gnu.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
This allows us to define a generic no-op version of PTR_MANGLE and
PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE
unconditionally in C sources, avoiding an unintended loss of hardening
due to missing include files or unlucky header inclusion ordering.
In i386 and x86_64, we can avoid a <tls.h> dependency in the C
code by using the computed constant from <tcb-offsets.h>. <sysdep.h>
no longer includes these definitions, so there is no cyclic dependency
anymore when computing the <tcb-offsets.h> constants.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Removal of legacy hwcaps support from the dynamic loader left
no users of _dl_string_hwcap.
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.0. (There are no new
constants covered by these tests in 6.0 that need any other header
changes.)
Tested with build-many-glibcs.py.
Linux 6.0 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 6.0.
Tested with build-many-glibcs.py.
Use INTERNAL_SYSCALL_CALL instead of INLINE_SYSCALL_CALL. This
requires emulate the semantic for hurd call (so __arc4random_buf
uses the fallback).
Checked on x86_64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Using an unsigned type prevents the fallback to be used if kernel
does not support getrandom syscall.
Checked on x86_64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Replace atomic_increment and atomic_increment_val with atomic_fetch_add_relaxed.
One case in sem_post.c uses release semantics (see comment above it).
The others are simple counters and do not protect any shared data from
concurrent accesses.
Passes regress on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
QEMU does not support support set_robust_list. Thus, we need
to enable detection of set_robust_list system call.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
It avoid a possible compiler warning where right size of operator
is converted from a negative value to unsigned.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
A new internal definition, __LIBC_LOCK_ALIGNMENT, is used to force
the 4-byte alignment only for m68k, other architecture keep the
natural alignment of the type used internally (and hppa does not
require 16-byte alignment for kernel-assisted CAS).
Reviewed-by: Florian Weimer <fweimer@redhat.com>
POSIX does not say this value is special. For example, old XFS file
systems may still use inode number zero.
Also update the comment regarding ENOENT. Linux may return ENOENT
for some file systems.
__syscall_error may end up farther than 1MiB away from a caller,
especially when linking statically large binaries. tail allows for
4GiB jumps and is reduced to j when a linked symbol is within range.
Fixes: 36960f0c76 ("RISC-V: Linux Syscall Interface")
Fixes: 7f33b09c65 ("RISC-V: Linux ABI")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
On s390x syscalls are triggered by svc instruction. One can
pass the syscall number encoded in the instruction "svc 123"
or by storing it in r1:
lghi r1,123
svc 0
If the syscall number is encoded in the instruction, this can
cause broken syscall restarts. Therefore this patch is now just
passing the syscall number in r1.
See also kernel-commit:
"s390/signal: switch to using vdso for sigreturn and syscall restart"
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/s390/[%e2%80%a6]call.c?h=v6.0-rc1&id=df29a7440c4b5c65765c8f60396b3b13063e24e9
As information, the "svc 0" feature was introduced in kernel 2.5.62:
commit b5aad611393ef2e132e3648fa4c6e56a9cfa8708
Changes to these arrays are often backported to stable releases,
but additions to these arrays shift the offsets of the following
_rltd_global_ro members, thus breaking the GLIBC_PRIVATE ABI.
Obviously, this change is itself an internal ABI break, but at least
it will avoid further ABI breaks going forward.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux 5.19 adds more HWCAP2_* values for AArch64; add these to its
bits/hwcap.h header in glibc.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
Linux 5.19 adds a new accounting flag AGROUP; add it to the
enumeration in sys/acct.h.
This shows up that the Alpha-specific variant of this header has a
different set of constants and struct acct, which appear to be the
constants and structure layout from Linux 2.0. These were changed
some time between Linux 2.0 and Linux 2.2; I see no evidence of an
Alpha-specific layout or set of constants, but haven't checked the
detailed Linux kernel history between those versions. Rather, it
looks like tha Alpha-specific header was originally needed because of
the use of types in the kernel structure (such as uid_t and gid_t)
that had different sizes on Alpha, and when glibc was updated for
changes to the structure and constants in the kernel
1998-10-02 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/unix/sysv/linux/sys/acct.h: Bring in sync with current
linux 2.1 version.
that simply omitted to do anything about the Alpha version.
Thus, remove the Alpha version in order to get the updated definitions
into use on Alpha, as I don't think the interfaces are actually
different for Alpha with any kernel version supported by glibc.
Tested for x86_64, and with build-many-glibcs.py for alpha-linux-gnu.
The kernel special-cases the zero argument for alpha brk, and we can
use that to restore the generic Linux error handling behavior.
Fixes commit b57ab258c1 ("Linux:
Introduce __brk_call for invoking the brk system call").
The #ifdef FSOPEN_CLOEXEC check did not work because the macro
was always defined in this header prior to the check, so that
the <linux/mount.h> contents did not matter.
Fixes commit 774058d729
("linux: Fix sys/mount.h usage with kernel headers").
I.e. from sysdeps/unix/sysv/linux/bits/in.h to netinet/in.h
It is following both the BSD and Linux definitions.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Now that kernel exports linux/mount.h and includes it on linux/fs.h,
its definitions might clash with glibc exports sys/mount.h. To avoid
the need to rearrange the Linux header to be always after glibc one,
the glibc sys/mount.h is changed to:
1. Undefine the macros also used as enum constants. This covers prior
inclusion of <linux/mount.h> (for instance MS_RDONLY).
2. Include <linux/mount.h> based on the usual __has_include check
(needs to use __has_include ("linux/mount.h") to paper over GCC
bugs.
3. Define enum fsconfig_command only if FSOPEN_CLOEXEC is not defined.
(FSOPEN_CLOEXEC should be a very close proxy.)
4. Define struct mount_attr if MOUNT_ATTR_SIZE_VER0 is not defined.
(Added in the same commit on the Linux side.)
This patch also adds some tests to check if including linux/fs.h and
linux/mount.h after and before sys/mount.h does work.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
So far this test checks if pidfd_open-syscall is supported,
which was introduced with linux 5.3.
The process_madvise-syscall was introduced with linux 5.10.
Thus you'll get FAILs if you are running a kernel in between.
This patch adds a check if the first process_madvise-syscall
returns ENOSYS and in this case will fail with UNSUPPORTED.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The older libc versions are obsolete for over twenty years now.
This patch removes the special flags for libc5 and libc4 and assumes
that all libraries cached are libc6 compatible and use FLAG_ELF_LIBC6.
Checked with a build for all affected architectures.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
exit only terminates the current thread, not the whole process, so it
is the wrong fallback system call in this context. All supported
Linux versions implement the exit_group system call anyway.
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 5.18. (There are no
new constants covered by these tests in 5.19, or in 5.17 or 5.18 in
the case of tst-mount-consts.py that previously used version 5.16,
that need any other header changes.)
Tested with build-many-glibcs.py.
Linux 5.19 has no new syscalls, but enables memfd_secret in the uapi
headers for RISC-V. Update the version number in syscall-names.list
to reflect that it is still current for 5.19 and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
The inline and library functions that the CMSG_NXTHDR macro may expand
to increment the pointer to the header before checking the stride of
the increment against available space. Since C only allows incrementing
pointers to one past the end of an array, the increment must be done
after a length check. This commit fixes that and includes a regression
test for CMSG_FIRSTHDR and CMSG_NXTHDR.
The Linux, Hurd, and generic headers are all changed.
Tested on Linux on armv7hl, i686, x86_64, aarch64, ppc64le, and s390x.
[BZ #28846]
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
pidfd_getfd can fail for a valid pidfd with errno EPERM for various
reasons in a restricted environment. Use FAIL_UNSUPPORTED in that case.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
