Commit Graph

1773 Commits

Author SHA1 Message Date
Joseph Myers
e8dab9477f Fix powerpc32 llrint, llrintf bad exceptions (bug 16422).
The versions of llrint and llrintf for older powerpc32 processors
convert the results of __rint / __rintf to long long int, resulting in
spurious exceptions from such casts in certain cases.  This patch
makes glibc work around the problems with the libgcc conversions when
the compiler used to build glibc doesn't use the fctidz instruction
for them.

Tested for powerpc.

	[BZ #16422]
	* sysdeps/powerpc/powerpc32/fpu/configure.ac (libc_cv_ppc_fctidz):
	New configure test.
	* sysdeps/powerpc/powerpc32/fpu/configure: Regenerated.
	* config.h.in [_LIBC] (HAVE_PPC_FCTIDZ): New macro.
	* sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include <limits.h>,
	<math_private.h> and <stdint.h>.
	(__llrint): Avoid conversions to long long int where those might
	raise spurious exceptions.
	* sysdeps/powerpc/powerpc32/fpu/s_llrintf.c: Include
	<math_private.h> and <stdint.h>.
	(__llrintf): Avoid conversions to long long int where those might
	raise spurious exceptions.
2015-10-13 00:52:54 +00:00
Joseph Myers
f1226a2ae3 Fix llrint, llround missing exceptions for ARM (bug 15470).
Similar to the recent fix for MIPS, ARM is also missing correct
exceptions on overflow from llrint and llround functions because casts
from floating-point types to long long do not result in correct
exceptions on overflow.  This patch enables the fix for this for ARM.

Tested for ARM.

	[BZ #15470]
	* sysdeps/arm/fix-fp-int-convert-overflow.h: New file.
2015-10-09 22:23:39 +00:00
Joseph Myers
06d97e5e61 Fix lrint, llrint, lround, llround missing exceptions for MIPS (bug 16399).
For 32-bit MIPS and some other systems, various of the lrint, llrint,
lround, llround functions can be missing exceptions on overflow
because casts do not (in current GCC) result in the proper
exceptions.  In the MIPS case there are two problems here: MIPS I code
generation uses an assembler macro that doesn't raise exceptions,
while the libgcc conversions of floating-point values to long long
also do not raise "invalid" on all overflow cases (and can raise
spurious "inexact").

This patch adds support in the generic code (only the functions for
which this problem has actually been seen) for forcing the "invalid"
exception in the problem cases, and enables that support for the
affected MIPS cases.

Tested for MIPS; also tested for x86_64 and x86 that installed
stripped shared libraries are unchanged by this patch.

	[BZ #16399]
	* sysdeps/generic/fix-fp-int-convert-overflow.h: New file.
	* sysdeps/ieee754/dbl-64/s_llrint.c: Include <fenv.h>, <limits.h>
	and <fix-fp-int-convert-overflow.h>.
	(__llrint) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/dbl-64/s_llround.c: Include <fenv.h>, <limits.h>
	and <fix-fp-int-convert-overflow.h>.
	(__llround) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/dbl-64/s_lrint.c: Include
	<fix-fp-int-convert-overflow.h>.
	(__lrint) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/dbl-64/s_lround.c: Include
	<fix-fp-int-convert-overflow.h>.
	(__lround) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/flt-32/s_llrintf.c: Include <fenv.h>, <limits.h>
	and <fix-fp-int-convert-overflow.h>.
	(__llrintf) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/flt-32/s_llroundf.c: Include <fenv.h>,
	<limits.h> and <fix-fp-int-convert-overflow.h>.
	(__llroundf) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/flt-32/s_lrintf.c: Include <fenv.h>, <limits.h>
	and <fix-fp-int-convert-overflow.h>.
	(__lrintf) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/ieee754/flt-32/s_lroundf.c: Include <fenv.h>, <limits.h>
	and <fix-fp-int-convert-overflow.h>.
	(__lroundf) [FE_INVALID]: Force FE_INVALID exception as needed if
	FIX_DBL_LLONG_CONVERT_OVERFLOW.
	* sysdeps/mips/mips32/fpu/fix-fp-int-convert-overflow.h: New file.
2015-10-09 21:02:19 +00:00
Joseph Myers
0e069029a8 Fix dbl-64 lrint for 64-bit long (bug 19095).
The dbl-64 implementation of lrint produces incorrect results for some
arguments with 64-bit long because a 32-bit (unsigned) low part of the
mantissa is shifted left, losing high bits in the process.  This patch
fixes this by casting to long int before shifting, as in lround (as
this case only applies for 64-bit long, there are no issues with
sign-extension).

Tested for mips64 (n64).

	[BZ #19095]
	* sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Cast low part of
	mantissa to long int before shifting left.
2015-10-09 00:32:14 +00:00
Joseph Myers
d0d286d32d Fix lrint, llrint missing exceptions close to overflow threshold (bug 19094).
The dbl-64, ldbl-96 and ldbl-128 implementations of lrint and llrint
fail to produce "invalid" exceptions in cases where the rounded result
overflows the target type, but truncating the floating-point argument
to the next integer towards zero does not overflow it (so in
particular casts do not produce such exceptions).  (This issue cannot
arise for float, or for double with 64-bit target type, or for ldbl-96
with 64-bit target type and negative arguments, because of
insufficient precision in the floating-point type for arguments with
the relevant property to exist.  It also obviously cannot arise in
FE_TOWARDZERO mode.)

This patch fixes these problems by inserting checks for the special
cases that can occur in each implementation, and explicitly raising
FE_INVALID (and avoiding the cast if it might raise spurious
FE_INEXACT, while raising FE_INEXACT explicitly in the cases where it
is needed; unlike lround and llround, FE_INEXACT is required, not
optional, for these functions for a within-range inexact result).

The fixes are conditional on FE_INVALID or FE_INEXACT being defined.
If any future architecture supports one but not both of those
exceptions, the code will fail to compile and need fixing to handle
that case (this seemed better than conditioning on both macros being
defined, resulting in code that would compile but quietly miss
exceptions on such a system).

Tested for x86_64, x86 and mips64.  Tested the ldbl-96 changes (only
relevant for ia64, it appears) on x86_64 by removing the x86_64
versions of lrintl / llrintl.

	[BZ #19094]
	* sysdeps/ieee754/dbl-64/s_lrint.c: Include <fenv.h> and
	<limits.h>.
	(__lrint) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
	when result overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-128/s_llrintl.c: Include <fenv.h> and
	<limits.h>.
	(__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
	when result overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-128/s_lrintl.c: Include <fenv.h> and
	<limits.h>.
	(__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
	when result overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-96/s_llrintl.c: Include <fenv.h> and
	<limits.h>.
	(__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
	when result overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-96/s_lrintl.c: Include <fenv.h> and
	<limits.h>.
	(__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
	when result overflows but exception would not result from cast.
	* math/libm-test.inc (lrint_test_data): Add more tests.
	(llrint_test_data): Likewise.
2015-10-08 22:17:45 +00:00
Carlos O'Donell
87701a58e2 strcoll: Remove incorrect STRDIFF-based optimization (Bug 18589).
The optimization introduced in commit
f13c2a8dff, causes regressions in
sorting for languages that have digraphs that change sort order, like
cs_CZ which sorts ch between h and i.

My analysis shows the fast-forwarding optimization in STRCOLL advances
through a digraph while possibly stopping in the middle which results
in a subsequent skipping of the digraph and incorrect sorting. The
optimization is incorrect as implemented and because of that I'm
removing it for 2.23, and I will also commit this fix for 2.22 where
it was originally introduced.

This patch reverts the optimization, introduces a new bug-strcoll2.c
regression test that tests both cs_CZ.UTF-8 and da_DK.ISO-8859-1 and
ensures they sort one digraph each correctly. The optimization can't be
applied without regressing this test.

Checked on x86_64, bug-strcoll2.c fails without this patch and passes
after. This will also get a fix on 2.22 which has the same bug.
2015-10-08 16:41:45 -04:00
Carlos O'Donell
104ff17183 Add BZ#19086 to NEWS. 2015-10-08 10:38:36 -04:00
Joseph Myers
8afdb7ac1e Fix lround, llround missing exceptions close to overflow threshold (bug 19088).
The dbl-64, ldbl-96 and ldbl-128 implementations of lround and llround
fail to produce "invalid" exceptions in cases where the rounded result
overflows the target type, but truncating the floating-point argument
to the next integer towards zero does not overflow it (so in
particular casts do not produce such exceptions).  (This issue cannot
arise for float, or for double with 64-bit target type, or for ldbl-96
with 64-bit target type and negative arguments, because of
insufficient precision in the floating-point type for arguments with
the relevant property to exist.)

This patch fixes these problems by inserting checks for the special
cases that can occur in each implementation, and explicitly raising
FE_INVALID (and avoiding the cast if it might raise spurious
FE_INEXACT).

Tested for x86_64, x86 and mips64.

	[BZ #19088]
	* sysdeps/ieee754/dbl-64/s_lround.c: Include <fenv.h> and
	<limits.h>.
	(__lround) [FE_INVALID]: Force FE_INVALID exception when result
	overflows but exception would not result from cast.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Include <fenv.h>
	and <limits.h>.
	(__lround) [FE_INVALID]: Force FE_INVALID exception when result
	overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-128/s_llroundl.c: Include <fenv.h> and
	<limits.h>.
	(__llroundl) [FE_INVALID]: Force FE_INVALID exception when result
	overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-128/s_lroundl.c: Include <fenv.h> and
	<limits.h>.
	(__lroundl) [FE_INVALID]: Force FE_INVALID exception when result
	overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-96/s_llroundl.c: Include <fenv.h> and
	<limits.h>.
	(__llroundl) [FE_INVALID]: Force FE_INVALID exception when result
	overflows but exception would not result from cast.
	* sysdeps/ieee754/ldbl-96/s_lroundl.c: Include <fenv.h> and
	<limits.h>.
	(__lroundl) [FE_INVALID]: Force FE_INVALID exception when result
	overflows but exception would not result from cast.
	* math/libm-test.inc (lround_test_data): Add more tests.
	(llround_test_data): Likewise.
2015-10-07 23:45:29 +00:00
Joseph Myers
119d073e33 Fix ldbl-128 lrintl, lroundl missing exceptions for 32-bit long (bug 19085).
The ldbl-128 implementations of lrintl and lroundl miss "invalid"
exceptions on systems with 32-bit long for arguments that overflow
long but have exponent below 48.  This patch fixes this by rearranging
the sequence of tests in the code so the exponent < 48 case is only
used for exponents that don't overflow long.

Tested for mips64 (n32 and n64).

	[BZ #19085]
	* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Move test for
	exponent below 48 inside case for non-overflowing exponent.
	* sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl): Likewise.
2015-10-07 16:10:59 +00:00
Joseph Myers
b75bc69cdf Don't use dbl-64/wordsize-64 lround based on llround for ILP32 (bug 19079).
The implementation of lround in dbl-64/wordsize-64 as an alias or
wrapper for llround is always incorrect when long is not 64-bit,
because it misses required exceptions in overflow cases, as shown by
my recently added tests.  This patch removes that alias / wrapper in
the non-LP64 case, together with the REGISTER_CAST_INT32_TO_INT64
macro, restoring the previous version of lround for dbl-64/wordsize-64
(newly conditioned on !_LP64).

Tested for x86_64, and for mips64 with use of dbl-64/wordsize-64
enabled.

	[BZ #19079]
	* sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Restore previous
	file, conditioned on [!_LP64].
	* sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c
	[!_LP64] (__lround): Do not define as function or alias.
	[!_LP64] (lround): Likewise.
	[!_LP64] (__lroundl): Likewise.
	[!_LP64] (lroundl): Likewise.
	* sysdeps/tile/sysdep.h (REGISTER_CAST_INT32_TO_INT64): Remove
	macro.
	* sysdeps/x86_64/x32/sysdep.h (REGISTER_CAST_INT32_TO_INT64):
	Likewise.
2015-10-07 00:40:12 +00:00
Joseph Myers
6c9678ebd4 Fix ldbl-128ibm expl overflow in non-default rounding modes (bug 19078).
The ldbl-128ibm expl wrapper checks the argument to determine when to
call __kernel_standard_l, thereby overriding overflowing results from
__ieee754_expl that could otherwise (given appropriately patched
libgcc) be correct for the rounding mode.  This patch changes it to
check the result of __ieee754_expl instead, as other versions of this
wrapper do.

Tested for powerpc.

	[BZ #19078]
	* sysdeps/ieee754/ldbl-128ibm/w_expl.c (o_thres): Remove variable.
	(u_thres): Likewise.
	(__expl): Determine whether to call __kernel_standard_l based on
	value of result, not argument.
2015-10-06 17:37:49 +00:00
Joseph Myers
31d4459e42 Fix ldbl-128ibm logl (1) sign of zero result (bug 19077).
The ldbl-128ibm implementation of logl produces a zero with the wrong
sign for logl (1) in FE_DOWNWARD mode.  This patch makes it explicitly
return 0.0L in that case, as in e.g. the ldbl-128 implementation.

Tested for powerpc.

	[BZ #19077]
	* sysdeps/ieee754/ldbl-128ibm/e_logl.c (__ieee754_logl): Return
	0.0L for argument 1.0L.
2015-10-06 15:32:06 +00:00
Joseph Myers
d79b568926 Fix ldbl-128ibm log1pl (-1) sign of infinity (bug 19076).
The ldbl-128ibm implementation of log1pl produces an infinity with the
wrong sign for log1pl (-1) in FE_DOWNWARD mode.  This patch fixes this
by changing a division (-1.0L / (x - x)) (incorrect in FE_DOWNWARD
mode) to (-1.0L / 0.0L) (correct in all rounding modes).

Tested for powerpc.

	[BZ #19076]
	* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Divide by
	constant 0.0L when computing infinite result.
2015-10-06 15:14:26 +00:00
Florian Weimer
3670da6bfb nss_nis: Do not call malloc_usable_size [BZ #10432]
This is a namespace violation, and interposed malloc implementations
are not required to interpose malloc_usable_size.
2015-10-06 14:03:35 +02:00
Florian Weimer
f586e13286 Harden tls_dtor_list with pointer mangling [BZ #19018] 2015-10-06 13:22:56 +02:00
Paul Pluzhnikov
be64c2ef2a Fix BZ #19012 -- iconv_open leaks memory on error path. 2015-10-05 20:03:48 -07:00
Joseph Myers
cec7d28af8 Fix ldbl-96 lroundl just below powers of 2 (bug 19071).
The ldbl-96 version of lroundl is incorrect for systems with 64-bit
long when the argument's absolute value is just below a power of 2,
2^32 or more, and rounds up to the next integer; in such cases, it
returns 0.  The problem is incrementing the high part of the mantissa
loses the high bit of the value (which is not an issue for any other
floating-point format, and is handled specially in lround when the bit
corresponding to 0.5 was in the high part rather than the low part).

This patch fixes this in a similar way to that used in llroundl:
storing the high part in an unsigned long variable before incrementing
it, so problems cannot occur in the case when this code is reachable.
I improved test coverage for both lround and llround by making them
use the same test inputs (appropriately conditioned on the size of
long in the lround case) - complete with the same comments, to make
comparison as easy as possible.  (This test coverage improvement was
how I found the lroundl bug.)

Tested for x86_64 and x86.

	[BZ #19071]
	* sysdeps/ieee754/ldbl-96/s_lroundl.c (__lroundl): Use unsigned
	long int variable to store possibly incremented high part of
	mantissa.
	* math/libm-test.inc (lround_test_data): Add tests used for
	llround.  Use [LONG_MAX > 0x7fffffff] consistently as condition
	for tests requiring 64-bit long.  Do not condition tests on
	[TEST_FLOAT] unnecessarily.
	(llround_test_data): Add tests used for lround.  Add another
	expectation for the "inexact" exception.  Do not condition tests
	on [TEST_FLOAT] unnecessarily.
2015-10-05 22:54:50 +00:00
Joseph Myers
a8133e197e Don't list bug 887 as fixed for glibc 2.16. 2015-10-05 17:49:28 +00:00
Joseph Myers
bc3753638a Work around powerpc32 integer 0 converting to -0 (bug 887, bug 19049, bug 19050).
On powerpc32 hard-float, older processors (ones where fcfid is not
available for 32-bit code), GCC generates conversions from integers to
floating point that wrongly convert integer 0 to -0 instead of +0 in
FE_DOWNWARD mode.  This in turn results in logb and a few other
functions wrongly returning -0 when they should return +0.

This patch works around this issue in glibc as I proposed in
<https://sourceware.org/ml/libc-alpha/2015-09/msg00728.html>, so that
the affected functions can be correct and the affected tests pass in
the absence of a GCC fix for this longstanding issue (GCC bug 67771 -
if fixed, of course we can put in GCC version conditionals, and
eventually phase out the workarounds).  A new macro
FIX_INT_FP_CONVERT_ZERO is added in a new sysdeps header
fix-int-fp-convert-zero.h, and the powerpc32/fpu version of that
header defines the macro based on the results of a configure test for
whether such conversions use the fcfid instruction.

Tested for x86_64 (that installed stripped shared libraries are
unchanged by the patch) and powerpc (that HAVE_PPC_FCFID comes out to
0 as expected and that the relevant tests are fixed).  Also tested a
build with GCC configured for -mcpu=power4 and verified that
HAVE_PPC_FCFID comes out to 1 in that case.

There are still some other issues to fix to get test-float and
test-double passing cleanly for older powerpc32 processors (apart from
the need for an ulps regeneration for powerpc).  (test-ldouble will be
harder to get passing cleanly, but with a combination of selected
fixes to ldbl-128ibm code that don't involve significant performance
issues, allowing spurious underflow and inexact exceptions for that
format, and lots of XFAILing for the default case of unpatched libgcc,
it should be doable.)

	[BZ #887]
	[BZ #19049]
	[BZ #19050]
	* sysdeps/generic/fix-int-fp-convert-zero.h: New file.
	* sysdeps/ieee754/dbl-64/e_log10.c: Include
	<fix-int-fp-convert-zero.h>.
	(__ieee754_log10): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/dbl-64/e_log2.c: Include
	<fix-int-fp-convert-zero.h>.
	(__ieee754_log2): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/dbl-64/s_erf.c: Include
	<fix-int-fp-convert-zero.h>.
	(__erfc): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/dbl-64/s_logb.c: Include
	<fix-int-fp-convert-zero.h>.
	(__logb): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/flt-32/e_log10f.c: Include
	<fix-int-fp-convert-zero.h>.
	(__ieee754_log10f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/flt-32/e_log2f.c: Include
	<fix-int-fp-convert-zero.h>.
	(__ieee754_log2f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/flt-32/s_erff.c: Include
	<fix-int-fp-convert-zero.h>.
	(__erfcf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/flt-32/s_logbf.c: Include
	<fix-int-fp-convert-zero.h>.
	(__logbf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/ldbl-128ibm/s_erfl.c: Include
	<fix-int-fp-convert-zero.h>.
	(__erfcl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/ieee754/ldbl-128ibm/s_logbl.c: Include
	<fix-int-fp-convert-zero.h>.
	(__logbl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
	* sysdeps/powerpc/powerpc32/fpu/configure.ac: New file.
	* sysdeps/powerpc/powerpc32/fpu/configure: New generated file.
	* sysdeps/powerpc/powerpc32/fpu/fix-int-fp-convert-zero.h: New
	file.
	* config.h.in [_LIBC] (HAVE_PPC_FCFID): New macro.
2015-10-05 17:46:50 +00:00
Joseph Myers
59a63cca11 Fix nexttoward overflow in non-default rounding modes (bug 19059).
ISO C requires overflowing results from nexttoward to be the
appropriate infinity independent of the rounding mode, but some
implementations use a rounding-mode-dependent result (this is the same
issue as was fixed for nextafter in bug 16677).  This patch fixes the
problem by making the nexttoward implementations discard the result
from the floating-point computation that forced an overflow exception
and then return the infinity previously computed with integer
arithmetic.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #19059]
	* math/s_nexttowardf.c (__nexttowardf): Do not return value from
	overflowing computation.
	* sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise.
	* sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise.
	* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward):
	Likewise.
	* sysdeps/ieee754/ldbl-128/s_nexttowardf.c (__nexttowardf):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf):
	Likewise.
	* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise.
	* sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf):
	Likewise.
	* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf):
	Likewise.
	* math/libm-test.inc (nexttoward_test_data): Add more tests.
2015-10-02 17:11:13 +00:00
Florian Weimer
676599b36a Harden putpwent, putgrent, putspent, putspent against injection [BZ #18724]
This prevents injection of ':' and '\n' into output functions which
use the NSS files database syntax.  Critical fields (user/group names
and file system paths) are checked strictly.  For backwards
compatibility, the GECOS field is rewritten instead.

The getent program is adjusted to use the put*ent functions in libc,
instead of local copies.  This changes the behavior of getent if user
names start with '-' or '+'.
2015-10-02 11:34:13 +02:00
Joseph Myers
4b84e2471b Fix ldbl-128 / ldbl-128ibm lgamma overflow handling (bug 16347, bug 19046).
The ldbl-128 / ldbl-128ibm implementation of lgamma has problems with
its handling of large arguments.  It has an overflow threshold that is
correct only for ldbl-128, despite being used for both types - with
diagnostic control macros as a temporary measure to disable warnings
about that constant overflowing for ldbl-128ibm - and it has a
calculation that's roughly x * log(x) - x, resulting in overflows for
arguments that are roughly at most a factor 1/log(threshold) below the
overflow threshold.

This patch fixes both issues, using an overflow threshold appropriate
for the type in question and adding another case for large arguments
that avoids the possible intermediate overflow.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #16347]
	[BZ #19046]
	* sysdeps/ieee754/ldbl-128/e_lgammal_r.c: Do not include
	<libc-internal.h>.
	(MAXLGM): Do not use diagnostic control macros.
	[LDBL_MANT_DIG == 106] (MAXLGM): Change value to overflow
	threshold for ldbl-128ibm.
	(__ieee754_lgammal_r): For large arguments, multiply by log - 1
	instead of multiplying by log then subtracting.
	* math/auto-libm-test-in: Add more tests of lgamma.
	* math/auto-libm-test-out: Regenerated.
2015-10-01 17:15:54 +00:00
Joseph Myers
7cda516f5f Fix ldbl-128ibm exp10l spurious overflows (bug 16620).
The ldbl-128ibm implementation of exp10l uses a version of log(10)
split into high and low parts - but the low part is negative, so
causing spurious overflows from __ieee754_expl (exp_high) in cases
close to the overflow threshold (I added relevant tests close to the
overflow threshold to the testsuite earlier today).  The same issue
applies close to the underflow threshold as well (except that spurious
underflows in IBM long double arithmetic are harder to fix than the
other deficiencies, so we might end up permitting those for IBM long
double in the libm testsuite, as permitted by ISO C).

This patch fixes it to use a low part rounded downward to 48 bits
instead.  (The choice of 48 instead of 53 bits is to make it more
obviously safe even when the low part of the argument is negative.)

Tested for powerpc.  (Note that because of libgcc bugs with
multiplication very close to LDBL_MAX, libgcc also needs patching for
all the problem cases to be fixed, but this patch is still safe and
correct in the absence of such libgcc fixes.)

	[BZ #16620]
	* sysdeps/ieee754/ldbl-128ibm/e_exp10l.c (log10_high): Use value
	of log (10) rounded downward to 48 bits.
	(log10_low): Use corresponding low part of log (10).
2015-09-30 23:34:59 +00:00
Joseph Myers
8c6c923636 Fix i386 acosh (-qNaN) spurious "invalid" exception.
The i386 versions of acoshf and acosh raise a spurious "invalid"
exception for an argument that is a quiet NaN with the sign bit set.
The integer arithmetic to detect arguments < 1 also detects -NaN, and
then the computation 0 / 0 in that case raises the exception.  This
patch fixes this by using (x - x) / (x - x) as the computation in that
case instead, which will always raise the exception for non-NaN
arguments reaching that code, but not for quiet NaN arguments.

Tested for x86_64 and x86.

	[BZ #19032]
	* sysdeps/i386/fpu/e_acosh.S (__ieee754_acosh): For arguments < 1,
	compute result as (x - x) / (x - x) not as 0 / 0.
	* sysdeps/i386/fpu/e_acoshf.S (__ieee754_acoshf): Likewise.
	* math/libm-test.inc (acosh_test_data): Add another test of acosh.
2015-09-30 21:44:42 +00:00
Joseph Myers
a5721ebc68 Fix clog, clog10 inaccuracy (bug 19016).
For arguments with X^2 + Y^2 close to 1, clog and clog10 avoid large
errors from log(hypot) by computing X^2 + Y^2 - 1 in a way that avoids
cancellation error and then using log1p.

However, the thresholds for using that approach still result in log
being used on argument as large as sqrt(13/16) > 0.9, leading to
significant errors, in some cases above the 9ulp maximum allowed in
glibc libm.  This patch arranges for the approach using log1p to be
used in any cases where |X|, |Y| < 1 and X^2 + Y^2 >= 0.5 (with the
existing allowance for cases where one of X and Y is very small),
adjusting the __x2y2m1 functions to work with the wider range of
inputs.  This way, log only gets used on arguments below sqrt(1/2) (or
substantially above 1), where the error involved is much less.

Tested for x86_64, x86, mips64 and powerpc.  For the ulps regeneration
I removed the existing clog and clog10 ulps before regenerating to
allow any reduced ulps to appear.  Tests added include those found by
random test generation to produce large ulps either before or after
the patch, and some found by trying inputs close to the (0.75, 0.5)
threshold where the potential errors from using log are largest.

	[BZ #19016]
	* sysdeps/generic/math_private.h (__x2y2m1f): Update comment to
	allow more cases with X^2 + Y^2 >= 0.5.
	* sysdeps/ieee754/dbl-64/x2y2m1.c (__x2y2m1): Likewise.  Add -1 as
	normal element in sum instead of special-casing based on values of
	arguments.
	* sysdeps/ieee754/dbl-64/x2y2m1f.c (__x2y2m1f): Update comment.
	* sysdeps/ieee754/ldbl-128/x2y2m1l.c (__x2y2m1l): Likewise.  Add
	-1 as normal element in sum instead of special-casing based on
	values of arguments.
	* sysdeps/ieee754/ldbl-128ibm/x2y2m1l.c (__x2y2m1l): Likewise.
	* sysdeps/ieee754/ldbl-96/x2y2m1.c [FLT_EVAL_METHOD != 0]
	(__x2y2m1): Update comment.
	* sysdeps/ieee754/ldbl-96/x2y2m1l.c (__x2y2m1l): Likewise.  Add -1
	as normal element in sum instead of special-casing based on values
	of arguments.
	* math/s_clog.c (__clog): Handle more cases using log1p without
	hypot.
	* math/s_clog10.c (__clog10): Likewise.
	* math/s_clog10f.c (__clog10f): Likewise.
	* math/s_clog10l.c (__clog10l): Likewise.
	* math/s_clogf.c (__clogf): Likewise.
	* math/s_clogl.c (__clogl): Likewise.
	* math/auto-libm-test-in: Add more tests of clog and clog10.
	* math/auto-libm-test-out: Regenerated.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
	* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2015-09-28 22:11:22 +00:00
Martin Sebor
60cf80f09d Let 'make check subdirs=string' succeed even when it's invoked
immediately after glibc has been built and before 'make check'
(or after 'make clean').
2015-09-28 16:55:57 -04:00
Paul Pluzhnikov
d36c75fc0d Fix BZ #18985 -- out of range data to strftime() causes a segfault 2015-09-26 13:27:48 -07:00
Joseph Myers
fa752c6981 Fix powf inaccuracy (bug 18956).
The flt-32 version of powf can be inaccurate because of bugs in the
extra-precision calculation of (x-1)/(x+1) or (x-1.5)/(x+1.5) as part
of calculating log(x) with extra precision: a constant used (as part
of adding 1 or 1.5 through integer arithmetic) is incorrect, and then
the code fails to mask a computed high part before using it in
arithmetic that relies on s_h*t_h being exactly representable.  This
patch fixes these bugs.

Tested for x86_64 and x86.  x86_64 ulps for powf removed and
regenerated to reflect reduced ulps from the increased accuracy for
existing tests.

	[BZ #18956]
	* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Add 0x00400000
	not 0x0040000 for high bit of mantissa.  Mask with 0xfffff000 when
	extracting high part.
	* math/auto-libm-test-in: Add another test of pow.
	* math/auto-libm-test-out: Regenerated.
	* sysdeps/x86_64/fpu/libm-test-ulps: Update.
2015-09-26 00:27:06 +00:00
Joseph Myers
6ace393821 Fix pow missing underflows (bug 18825).
Similar to various other bugs in this area, pow functions can fail to
raise the underflow exception when the result is tiny and inexact but
one or more low bits of the intermediate result that is scaled down
(or, in the i386 case, converted from a wider evaluation format) are
zero.  This patch forces the exception in a similar way to previous
fixes, thereby concluding the fixes for known bugs with missing
underflow exceptions currently filed in Bugzilla.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #18825]
	* sysdeps/i386/fpu/i386-math-asm.h (FLT_NARROW_EVAL_UFLOW_NONNAN):
	New macro.
	(DBL_NARROW_EVAL_UFLOW_NONNAN): Likewise.
	(LDBL_CHECK_FORCE_UFLOW_NONNAN): Likewise.
	* sysdeps/i386/fpu/e_pow.S: Use DEFINE_DBL_MIN.
	(__ieee754_pow): Use DBL_NARROW_EVAL_UFLOW_NONNAN instead of
	DBL_NARROW_EVAL, reloading the PIC register as needed.
	* sysdeps/i386/fpu/e_powf.S: Use DEFINE_FLT_MIN.
	(__ieee754_powf): Use FLT_NARROW_EVAL_UFLOW_NONNAN instead of
	FLT_NARROW_EVAL.  Use separate return path for case when first
	argument is NaN.
	* sysdeps/i386/fpu/e_powl.S: Include <i386-math-asm.h>.  Use
	DEFINE_LDBL_MIN.
	(__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN, reloading the
	PIC register.
	* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Use
	math_check_force_underflow_nonneg.
	* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Force
	underflow for subnormal result.
	* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Use
	math_check_force_underflow_nonneg.
	* sysdeps/x86/fpu/powl_helper.c (__powl_helper): Use
	math_check_force_underflow.
	* sysdeps/x86_64/fpu/x86_64-math-asm.h
	(LDBL_CHECK_FORCE_UFLOW_NONNAN): New macro.
	* sysdeps/x86_64/fpu/e_powl.S: Include <x86_64-math-asm.h>.  Use
	DEFINE_LDBL_MIN.
	(__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN.
	* math/auto-libm-test-in: Add more tests of pow.
	* math/auto-libm-test-out: Regenerated.
2015-09-25 22:29:10 +00:00
Maciej W. Rozycki
93bad7c97c [BZ #17250] Fix static dlopen default library search path
Fix a regression introduced with commit 0d23a5c1 [Static dlopen
correction fallout fixes] that caused the default library search path to
be ignored for modules loaded with dlopen from static executables.

	[BZ #17250]
	* elf/dl-support.c (_dl_main_map): Don't initialize l_flags_1
	member.
2015-09-25 09:37:12 +01:00
Joseph Myers
f6987f5aa4 Fix hypot missing underflows (bug 18803).
Similar to various other bugs in this area, hypot functions can fail
to raise the underflow exception when the result is tiny and inexact
but one or more low bits of the intermediate result that is scaled
down (or, in the i386 case, converted from a wider evaluation format)
are zero.  This patch forces the exception in a similar way to
previous fixes.

Note that this issue cannot arise for implementations of hypotf using
double (or wider) for intermediate evaluation (if hypotf should
underflow, that means the double square root is being computed of some
number of the form N*2^-298, for 0 < N < 2^46, which is exactly
represented as a double, and whatever the rounding mode such a square
root cannot have a mantissa with all zeroes after the initial 23
bits).  Thus no changes are made to hypotf implementations in this
patch, only to hypot and hypotl.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #18803]
	* sysdeps/i386/fpu/e_hypot.S: Use DEFINE_DBL_MIN.
	(MO): New macro.
	(__ieee754_hypot) [PIC]: Load PIC register.
	(__ieee754_hypot): Use DBL_NARROW_EVAL_UFLOW_NONNEG instead of
	DBL_NARROW_EVAL.
	* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Use
	math_check_force_underflow_nonneg in case where result might be
	tiny.
	* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl):
	Likewise.
	* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
	* sysdeps/powerpc/fpu/e_hypot.c (__ieee754_hypot): Likewise.
	* math/auto-libm-test-in: Add more tests of hypot.
	* math/auto-libm-test-out: Regenerated.
2015-09-24 23:43:57 +00:00
Joseph Myers
51df260506 Fix x86_64 fma4 pow inappropriate contraction (bug 19003).
The x86_64 fma4 version of pow fails to disable contraction of
operations other than those explicitly intended to use fma
instructions, so resulting in large ulps errors on processors with
fma4 instructions, as in bug 18104 (165ulp for the test added for that
bug; error originally reported by "blaaa" on #glibc).  This patch adds
$(config-cflags-nofma) for e_pow-fma4.c, corresponding to the use for
e_pow.c in sysdeps/ieee754/dbl-64/Makefile.

Tested for x86_64 on a processor with fma4.

	[BZ #19003]
	* sysdeps/x86_64/fpu/multiarch/Makefile (CFLAGS-e_pow-fma4.c): Add
	$(config-cflags-nofma).
2015-09-24 16:48:32 +00:00
Joseph Myers
6f0f237bf5 Avoid excess range in results from i386 exp, hypot, pow functions (bug 18980).
i386 exp, hypot and pow functions can return overflowing and
underflowing values with excess range and precision; ; Wilco
Dijkstra's patches to make isfinite etc. expand inline cause this
pre-existing issue to result in test failures.

This patch fixes those functions to avoid excess range and precision
in their return values.  Appropriate macros are added for the repeated
code sequences; in future I'll add more such macros and refactor
existing code forcing underflow (with or without also eliminating
excess range and precision from the return value) to use such macros.

Tested for x86.  If, after this patch, you still see x86 libm test
failures with excess range or precision, please file bugs in Bugzilla.

	[BZ #18980]
	* sysdeps/i386/fpu/i386-math-asm.h (DEFINE_FLT_MIN): New macro.
	(DEFINE_DBL_MIN): Likewise.
	(FLT_NARROW_EVAL_UFLOW_NONNEG_NAN): Likewise.
	(DBL_NARROW_EVAL_UFLOW_NONNEG_NAN): Likewise.
	(FLT_NARROW_EVAL_UFLOW_NONNEG): Likewise.
	(DBL_NARROW_EVAL_UFLOW_NONNEG): Likewise.
	* sysdeps/i386/fpu/e_exp.S: Include <i386-math-asm.h>.
	(dbl_min): Replace with use of DEFINE_DBL_MIN.
	(__ieee754_exp): Use DBL_NARROW_EVAL_UFLOW_NONNEG_NAN.
	(__exp_finite): Use DBL_NARROW_EVAL_UFLOW_NONNEG.
	* sysdeps/i386/fpu/e_exp10.S: Include <i386-math-asm.h>.
	(dbl_min): Replace with use of DEFINE_DBL_MIN.
	(__ieee754_exp10): Use DBL_NARROW_EVAL_UFLOW_NONNEG_NAN.
	* sysdeps/i386/fpu/e_exp10f.S: Include <i386-math-asm.h>.
	(flt_min): Replace with use of DEFINE_FLT_MIN.
	(__ieee754_exp10f): Use FLT_NARROW_EVAL_UFLOW_NONNEG_NAN.
	* sysdeps/i386/fpu/e_exp2.S: Include <i386-math-asm.h>.
	(dbl_min): Replace with use of DEFINE_DBL_MIN.
	(__ieee754_exp2): Use DBL_NARROW_EVAL_UFLOW_NONNEG_NAN.
	* sysdeps/i386/fpu/e_exp2f.S: Include <i386-math-asm.h>.
	(flt_min): Replace with use of DEFINE_FLT_MIN.
	(__ieee754_exp2f): Use FLT_NARROW_EVAL_UFLOW_NONNEG_NAN.
	* sysdeps/i386/fpu/e_expf.S: Include <i386-math-asm.h>.
	(flt_min): Replace with use of DEFINE_FLT_MIN.
	(__ieee754_expf): Use FLT_NARROW_EVAL_UFLOW_NONNEG_NAN.
	(__expf_finite): Use FLT_NARROW_EVAL_UFLOW_NONNEG.
	* sysdeps/i386/fpu/e_hypot.S: Include <i386-math-asm.h>.
	(__ieee754_hypot): Use DBL_NARROW_EVAL.
	* sysdeps/i386/fpu/e_hypotf.S: Include <i386-math-asm.h>.
	(__ieee754_hypotf): Use FLT_NARROW_EVAL.
	* sysdeps/i386/fpu/e_pow.S: Include <i386-math-asm.h>.
	(__ieee754_pow): Use DBL_NARROW_EVAL.
	* sysdeps/i386/fpu/e_powf.S: Include <i386-math-asm.h>.
	(__ieee754_powf): Use FLT_NARROW_EVAL.
	* sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.S
	(__ieee754_expf_sse2): Convert double-precision result to single
	precision.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
2015-09-18 21:53:22 +00:00
Joseph Myers
94ced920a9 Avoid excess range in results from i386 scalb functions (bug 18981).
i386 scalb / scalbn / scalbln (and thus ldexp) functions for float and
double can return results with excess range (and consequently excess
precision for subnormal results).  As the results of these functions
are fully determined by reference to IEEE 754 operations, this is
unambiguously a bug, apart from the testsuite failures it causes.

This patch makes those functions store their results on the stack and
load them back to eliminate the excess range.  Double rounding is not
a problem, as the only cases where it could occur are when the result
overflows or underflows for extended precision, and then the
double-rounded results are the same as the single-rounded results.

The new macros will be used for more functions, more such macros
added, and existing code refactored to use such macros, in subsequent
patches.

Tested for x86.  Committed.

	[BZ #18981]
	* sysdeps/i386/fpu/i386-math-asm.h: New file.
	* sysdeps/i386/fpu/e_scalb.S: Include <i386-math-asm.h>.
	(__ieee754_scalb): Use DBL_NARROW_EVAL.
	* sysdeps/i386/fpu/e_scalbf.S: Include <i386-math-asm.h>.
	(__ieee754_scalbf): Use FLT_NARROW_EVAL.
	* sysdeps/i386/fpu/s_scalbn.S: Include <i386-math-asm.h>.
	(__scalbn): Use DBL_NARROW_EVAL.
	* sysdeps/i386/fpu/s_scalbnf.S: Include <i386-math-asm.h>.
	(__scalbnf): Use FLT_NARROW_EVAL.
2015-09-18 20:34:59 +00:00
Wilco Dijkstra
8df4e219e4 Add inlining of the C99 math functions isinf/isnan/signbit/isfinite/isnormal/fpclassify using GCC
built-ins when available. Since going through the PLT is expensive for these small functions,
inlining results in major speedups (about 7x on Cortex-A57 for isinf). The GCC built-ins are not
correct if signalling NaN support is required, and thus are turned off in that case (see GCC bug
66462). The test-snan.c tests sNaNs and so must be explicitly built with -fsignaling-nans.

2015-09-18  Wilco Dijkstra  <wdijkstr@arm.com>

        [BZ #15367]
        [BZ #17441]

        * math/Makefile: Build test-snan.c with -fsignaling-nans.
        * math/math.h (fpclassify): Use __builtin_fpclassify when
        available.  (signbit): Use __builtin_signbit(f/l).
        (isfinite): Use__builtin_isfinite.  (isnormal): Use
        __builtin_isnormal.  (isnan): Use __builtin_isnan.
        (isinf): Use __builtin_isinf_sign.
2015-09-18 16:34:45 +01:00
Vincent Bernat
e952e1dfeb time: in strptime(), make %z accept [+-]HH:MM tz [BZ #17887]
In ISO 8601, +03:30 is a valid time zone. Currently, strptime() only
parses it as a 2-digit time zone an believes this is +03:00. This change
makes it accept a single colon.
2015-09-18 01:17:15 -04:00
Vincent Bernat
900f33e23e time: in strptime(), make %z accept Z as a time zone [BZ #17886]
In ISO 8601, the timezone can be 'Z' instead of using
digits. 2014-08-17T12:33:12+0000 is often expressed as
2014-08-17T12:33:12Z.
2015-09-18 01:15:45 -04:00
H.J. Lu
e5d19c08d1 Use __pthread_setcancelstate in libc.a
This patch references __pthread_setcancelstate instead of
pthread_setcancelstate in libc.a.

	[BZ #18970]
	* misc/error.c (error): Replace pthread_setcancelstate with
	__pthread_setcancelstate.
	(error_at_line): Likewise.
	* posix/wordexp.c (parse_comm): Likewise.
	* stdlib/fmtmsg.c (fmtmsg): Likewise.
	* nptl/forward.c (pthread_setcancelstate): Renamed to ...
	(__pthread_setcancelstate): This.
	(pthread_setcancelstate): Add an alias.
	* nptl/nptl-init.c (pthread_functions): Replace
	ptr_pthread_setcancelstate with ptr___pthread_setcancelstate.
	* sysdeps/nptl/pthread-functions.h (pthread_functions): Likewise.
	* nptl/pthreadP.h (__pthread_setcancelstate): Mark it with
	hidden_proto.
	* nptl/pthread_setcancelstate.c (__pthread_setcancelstate): Mark
	it with hidden_def.
	* sysdeps/nptl/libc-lockP.h (__pthread_setcancelstate): New.
	(pthread_setcancelstate): Renamed to ...
	(__pthread_setcancelstate): This.
	* sysdeps/unix/sysv/linux/fatal-prepare.h (FATAL_PREPARE): Use
	__libc_ptf_call with __pthread_setcancelstate.
2015-09-17 16:38:54 -07:00
Joseph Myers
61f8937898 Fix sign of zero part from ctan / ctanh when argument infinite (bug 17118).
C99/C11 Annex G specifies the sign of the zero part of the result of
ctan (x +/- i * Inf) and ctanh (+/-Inf + i * y).  This patch fixes glibc
to follow that specification, along the lines I described in my review
of Andreas's previous patch for this issue
<https://sourceware.org/ml/libc-alpha/2014-08/msg00142.html>.

Tested for x86_64.

2015-09-17  Joseph Myers  <joseph@codesourcery.com>
	    Andreas Schwab  <schwab@suse.de>

	[BZ #17118]
	* math/s_ctan.c (__ctan): Determine sign of zero real part of
	result when imaginary part of argument is infinite using sine and
	cosine.
	* math/s_ctanf.c (__ctanf): Likewise.
	* math/s_ctanl.c (__ctanl): Likewise.
	* math/s_ctanh.c (__ctanh): Determine sign of zero imaginary part
	of result when real part of argument is infinite using sine and
	cosine.
	* math/s_ctanhf.c (__ctanhf): Likewise.
	* math/s_ctanhl.c (__ctanhl): Likewise.
	* math/libm-test.inc (ctan_test_data): Add more tests of ctan.
	(ctanh_test_data): Add more tests of ctanh.
2015-09-17 21:21:39 +00:00
Joseph Myers
b8682397ab Reduce number of constants in __finite* (bug 15384).
Bug 15384 notes that in __finite, two different constants are used
that could be the same constant (the result only depends on the
exponent of the floating-point representation), and that using the
same constant is better for architectures where constants need loading
from a constant pool.  This patch implements that change.

Tested for x86_64, mips64 and powerpc.

	[BZ #15384]
	* sysdeps/ieee754/dbl-64/s_finite.c (FINITE): Use same constant as
	bit-mask as in subtraction.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c (__finite):
	Likewise.
	* sysdeps/ieee754/flt-32/s_finitef.c (FINITEF): Likewise.
	* sysdeps/ieee754/ldbl-128/s_finitel.c (__finitel): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_finitel.c (__finitel): Likewise.
2015-09-17 16:47:14 +00:00
Joseph Myers
46f74e1dee Fix tgamma missing underflows (bug 18951).
Similar to various other bugs in this area, tgamma functions can fail
to raise the underflow exception when the result is tiny and inexact
but one or more low bits of the intermediate result that is scaled
down are zero.  This patch forces the exception in a similar way to
previous fixes.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #18951]
	* sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Force
	underflow exception for small results.
	* sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r):
	Likewise.
	* sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r):
	Likewise.
	* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r):
	Likewise.
	* sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r):
	Likewise.
	* math/auto-libm-test-in: Add more tests of tgamma.
	* math/auto-libm-test-out: Regenerated.
2015-09-17 15:51:54 +00:00
Joseph Myers
1f11365a75 Don't declare float / long double Bessel functions for XSI POSIX (bug 18977).
The float and long double versions of Bessel function (j0f, y1l, etc.)
are not in POSIX; only the double versions are.  This patch
accordingly limits the declarations of those functions to __USE_MISC,
and fixes the conform/ test expectations which matched the previous
incorrect declarations.

Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by this patch).

	[BZ #18977]
	* math/bits/mathcalls.h
	[!__USE_MISC && __USE_XOPEN && !__MATH_DECLARING_DOUBLE] (j0): Do
	not declare.
	[!__USE_MISC && __USE_XOPEN && !__MATH_DECLARING_DOUBLE] (j1):
	Likewise.
	[!__USE_MISC && __USE_XOPEN && !__MATH_DECLARING_DOUBLE] (jn):
	Likewise.
	[!__USE_MISC && __USE_XOPEN && !__MATH_DECLARING_DOUBLE] (y0):
	Likewise.
	[!__USE_MISC && __USE_XOPEN && !__MATH_DECLARING_DOUBLE] (y1):
	Likewise.
	[!__USE_MISC && __USE_XOPEN && !__MATH_DECLARING_DOUBLE] (yn):
	Likewise.
	* conform/data/math.h-data
	[!ISO99 && !ISO11 && !POSIX && !POSIX2008] (j0f): Do not expect
	function.
	[!ISO99 && !ISO11 && !POSIX && !POSIX2008] (j1f): Likewise.
	[!ISO99 && !ISO11 && !POSIX && !POSIX2008] (jnf): Likewise.
	[!ISO99 && !ISO11 && !POSIX && !POSIX2008] (y0f): Likewise.
	[!ISO99 && !ISO11 && !POSIX && !POSIX2008] (y1f): Likewise.
	[!ISO99 && !ISO11 && !POSIX && !POSIX2008] (ynf): Likewise.
	[!ISO99 && !ISO11 && !POSIX && !POSIX2008] (j0l): Likewise.
	[!ISO99 && !ISO11 && !POSIX && !POSIX2008] (j1l): Likewise.
	[!ISO99 && !ISO11 && !POSIX && !POSIX2008] (jnl): Likewise.
	[!ISO99 && !ISO11 && !POSIX && !POSIX2008] (y0l): Likewise.
	[!ISO99 && !ISO11 && !POSIX && !POSIX2008] (y1l): Likewise.
	[!ISO99 && !ISO11 && !POSIX && !POSIX2008] (ynl): Likewise.
2015-09-16 22:04:40 +00:00
Joseph Myers
da2f4f2dd5 Make scalbn set errno (bug 6803).
As noted in bug 6803, scalbn fails to set errno on overflow and
underflow.  This patch fixes this by making scalbn an alias of ldexp,
which has exactly the same semantics (for floating-point types with
radix 2) and already has wrappers that deal with setting errno,
instead of an alias of the internal __scalbn (which ldexp calls).

Notes:

* Where compat symbols were defined for scalbn functions, I didn't
  change what they point to (to keep the patch minimal), so such
  compat symbols continue to go directly to the non-errno-setting
  functions.

* Mike, I didn't do anything with the IA64 versions of these
  functions, where I think both the ldexp and scalbn functions already
  deal with setting errno.  As a cleanup (not needed to fix this bug)
  however you might want to make those functions into aliases for
  IA64; there is no need for them to be separate function
  implementations at all.

* This concludes the fix for bug 6803 since the scalb and scalbln
  cases of that bug were fixed some time ago.

Tested for x86_64, x86, mips64 and powerpc.

	[BZ #6803]
	* math/s_ldexp.c (scalbn): Define as weak alias of __ldexp.
	[NO_LONG_DOUBLE] (scalbnl): Define as weak alias of __ldexp.
	* math/s_ldexpf.c (scalbnf): Define as weak alias of __ldexpf.
	* math/s_ldexpl.c (scalbnl): Define as weak alias of __ldexpl.
	* sysdeps/i386/fpu/s_scalbn.S (scalbn): Remove alias.
	* sysdeps/i386/fpu/s_scalbnf.S (scalbnf): Likewise.
	* sysdeps/i386/fpu/s_scalbnl.S (scalbnl): Likewise.
	* sysdeps/ieee754/dbl-64/s_scalbn.c (scalbn): Likewise.
	[NO_LONG_DOUBLE] (scalbnl): Likewise.
	* sysdeps/ieee754/dbl-64/wordsize-64/s_scalbn.c (scalbn):
	Likewise.
	[NO_LONG_DOUBLE] (scalbnl): Likewise.
	* sysdeps/ieee754/flt-32/s_scalbnf.c (scalbnf): Likewise.
	* sysdeps/ieee754/ldbl-128/s_scalbnl.c (scalbnl): Likewise.
	* sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c (scalbnl): Remove
	long_double_symbol calls.
	* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c (scalbnl): Likewise.
	* sysdeps/ieee754/ldbl-opt/s_ldexpl.c (__ldexpl_2): Define as
	strong alias of __ldexpl.
	(scalbnl): Define using long_double_symbol.
	* sysdeps/m68k/m680x0/fpu/s_scalbn.c (__CONCATX(scalbn,suffix)):
	Remove alias.
	* sysdeps/sparc/sparc64/soft-fp/s_scalbnl.c (scalbnl): Likewise.
	* sysdeps/x86_64/fpu/s_scalbnl.S (scalbnl): Likewise.
	* math/libm-test.inc (scalbn_test_data): Add errno expectations.
	(scalbln_test_data): Add more errno expectations.
2015-09-16 21:11:00 +00:00
Joseph Myers
c88b3da93e Update de.po from Translation Project (bug 4404).
[BZ #4404]
	* po/de.po: Update from Translation Project.
2015-09-16 16:51:28 +00:00
Joseph Myers
8124ac3e73 Clean up ldbl-128 / ldbl-128ibm expm1l dead code (bug 16415).
The ldbl-128 and ldbl-128ibm expm1l implementations have code to
handle +Inf and finite arguments above an overflow threshold.  Since
they now use __expl for large positive arguments to fix other
problems, this code is unreachable; this patch removes it.

Tested for mips64 and powerpc.

	[BZ #16415]
	* sysdeps/ieee754/ldbl-128/s_expm1l.c (maxlog): Remove variable.
	(__expm1l): Remove code to handle positive infinity and overflow.
	* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c (maxlog): Remove
	variable.
	(__expm1l): Remove code to handle positive infinity and overflow.
2015-09-16 16:42:46 +00:00
Paul Pluzhnikov
560b04462f Fix BZ #18872 -- memory leak in printf_positional. 2015-09-16 09:16:11 -07:00
Andreas Schwab
1f60740e5f Remove extra va_start/va_end calls (bug 17244) 2015-09-16 14:51:28 +02:00
Andreas Schwab
a6d9312c4d Add missing va_end calls (bug 17243) 2015-09-16 14:51:28 +02:00
Joseph Myers
de20571d40 Fix math.h, tgmath.h XSI POSIX namespace (gamma, isnan, scalb) (bug 18967).
math.h incorrectly declares various functions for XSI POSIX 2001 and
2008 editions.  gamma was removed in the 2001 edition but is still
declared, along with gammaf and gammal which were never standard
functions.  isnan is still declared as a function, along with isnanf
and isnanl which were never standard functions, although in 2001 the
function was replaced by the type-generic macro.  scalbf and scalbl
are declared although never standard, and scalb was removed in the
2008 edition but is still declared.  The scalb type-generic macro in
tgmath.h shouldn't be present for any POSIX version, since POSIX never
had such a type-generic macro.

This patch disables all those declarations in the relevant cases (as a
minimal fix, it leaves them enabled for __USE_MISC).  For the matter
of declaring scalb but not scalbf or scalbl for the 2001 edition, a
new macro __MATH_DECLARING_DOUBLE is added, defined by math.h around
includes of bits/mathcalls.h, for bits/mathcalls.h to use to test
which type's functions are being declared.

Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).

	[BZ #18967]
	* math/math.h (__MATH_DECLARING_DOUBLE): New macro.  Define and
	undefine around includes of <bits/mathcalls.h>.
	* math/bits/mathcalls.h [!__USE_MISC && __USE_XOPEN2K] (isnan): Do
	not declare function.
	[!__USE_MISC && __USE_XOPEN2K] (gamma): Likewise.
	[!__USE_MISC && (!__MATH_DECLARING_DOUBLE || __USE_XOPEN2K8)]
	(scalb): Likewise.
	* math/tgmath.h [!__USE_MISC && __USE_XOPEN_EXTENDED] (scalb): Do
	not define macro.
	* conform/Makefile (test-xfail-XOPEN2K/math.h/conform): Remove
	variable.
	(test-xfail-XOPEN2K/tgmath.h/conform): Likewise.
	(test-xfail-XOPEN2K8/math.h/conform): Likewise.
	(test-xfail-XOPEN2K8/tgmath.h/conform): Likewise.
2015-09-15 22:12:40 +00:00
Joseph Myers
dfa0f62011 Fix ldbl-128ibm nearbyintl use of signaling comparisons on NaNs (bug 18857).
The ldbl-128ibm implementation of nearbyintl wrongly uses signaling
comparisons such as "if (fabs (u.d[0].d) < TWO52)" on arguments that
might be NaNs, when "invalid" exceptions should not be raised.  (For
hard float, this issue may be hidden by
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58684>, powerpc GCC
wrongly only using unordered comparison instructions.)  This patch
fixes this by just returning the argument if it is not finite (because
of the arbitrary value of the low part of a NaN in IBM long double,
there are quite a lot of comparisons that could end up involving a NaN
when the argument to nearbyintl is a NaN, so excluding NaN arguments
at the start is the simplest and safest fix).

Tested for powerpc-nofpu, where it removes failures for spurious
"invalid" exceptions from nearbyintl.

	[BZ #18857]
	* sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c (__nearbyintl): Just
	return non-finite argument without doing ordered comparisons on
	it.
2015-09-15 20:48:05 +00:00