Reflow all long lines adding comment terminators.
Sort all reflowed text using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reflow all long lines adding comment terminators.
Sort all reflowed text using scripts/sort-makefile-lines.py.
No regressions running microbenchmarks.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reflow all long lines adding comment terminators.
Sort all reflowed text using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reflow all long lines adding comment terminators.
Rename files that cause inconsistent ordering.
Sort all reflowed text using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reflow Makefile.
Sort using updated scripts/sort-makefile-lines.py.
Code generation is changed as routines are linked in sorted order
as expected.
No regressions on x86_64 and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reflow Makefile.
Sort using updated scripts/sort-makefile-lines.py.
Code generation is changed as routines are linked in sorted order
as expected.
No regressions on x86_64 and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Sort tests against updated scripts/sort-makefile-lines.py.
No changes in generated code.
No regressions on x86_64 and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Sort tests against updated scripts/sort-makefile-lines.py.
No changes in generated code.
No regressions on x86_64 and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
We must return < 0, 0, or > 0 as the result of the comparison function
for cmp_to_key() to work correctly across all comparisons.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Move content from the Security Process[1] and Security Exceptions[2]
wiki documents into the repository so that it is in a standard place for
analysis tools to look for the glibc security policy.
This is a more or less verbatim port of the wiki document with some
restructuring for a more coherent layout since the two pages are now
merged. There should be no change in messaging in this commit.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux 6.3 adds six HWCAP2_SME* constants for AArch64; add them to the
corresponding bits/hwcap.h in glibc.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
strlen, which is another ifunc-selected function, is invoked during
early static executable startup if the argv arrives from the exec
server. Make it not crash.
Checked on x86_64-gnu: statically linked executables launched after the
exec server is up now start up successfully.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230517191436.73636-10-bugaevc@gmail.com>
On x86_64, we have to pass function arguments in registers, not on the
stack. We also have to align the stack pointer in a specific way. Since
sharing the logic with i386 does not bring much benefit, split the file
back into i386- and x86_64-specific versions, and fix the x86_64 version
to set up the thread properly.
Bonus: i386 keeps doing the extra RPC inside __thread_set_pcsptp to
fetch the state of the thread before setting it; but x86_64 no lnoger
does that.
Checked on x86_64-gnu and i686-gnu.
Fixes be6d002ca2
"hurd: Set up the basic tree for x86_64-gnu"
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230517191436.73636-9-bugaevc@gmail.com>
It is illegal to call thread_get_state () on mach_thread_self (), so
this codepath cannot be used as-is to fork the calling thread's TLS.
Fortunately we can use THREAD_SELF (aka %fs:0x0) to find out the value
of our fs_base without calling into the kernel.
Fixes: f6cf701efc
"hurd: Implement TLS for x86_64"
Checked on x86_64-gnu: fork () now works!
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230517191436.73636-8-bugaevc@gmail.com>
Unlike sigstate->thread, tcb->self did not hold a Mach port reference on
the thread port it names. This means that the port can be deallocated,
and the name reused for something else, without anyone noticing. Using
tcb->self will then lead to port use-after-free.
Fortunately nothing was accessing tcb->self, other than it being
intially set to then-valid thread port name upon TCB initialization. To
assert that this keeps being the case without altering TCB layout,
rename self -> self_do_not_use, and stop initializing it.
Also, do not (re-)allocate a whole separate and unused stack for the
main thread, and just exit __pthread_setup early in this case.
Found upon attempting to use tcb->self and getting unexpected crashes.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230517191436.73636-7-bugaevc@gmail.com>
...instead of mach_setup_thread (), which is unsuitable for setting up
function calls.
Checked on x86_64-gnu: the signal thread no longer crashes upon trying
to process a message.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230517191436.73636-6-bugaevc@gmail.com>
This is just like mach_setup_thread (), but it's suitable for making the
thread call a function correctly, as opposed to explicitly setting the
thread's stack and instruction pointers to the given values. Internally,
it uses MACHINE_THREAD_STATE_SETUP_CALL.
Unlike mach_setup_thread (), which is exported via mach.h for the
benefit of the Hurd exec server, __mach_setup_thread_call () is private
to glibc for the time being.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230517191436.73636-5-bugaevc@gmail.com>
The existing two macros, MACHINE_THREAD_STATE_SET_PC and
MACHINE_THREAD_STATE_SET_SP, can be used to set program counter and the
stack pointer registers in a machine-specific thread state structure.
Useful as it is, this may not be enough to set up the thread to make a
function call, because the machine-specific ABI may impose additional
requirements. In particular, x86_64 ABI requires that upon function
entry, the stack pointer is 8 less than 16-byte aligned (sp & 15 == 8).
To deal with this, introduce a new macro,
MACHINE_THREAD_STATE_SETUP_CALL (), which sets both stack and
instruction pointers, and also applies any machine-specific requirements
to make a valid function call. The default implementation simply
forwards to MACHINE_THREAD_STATE_SET_PC and MACHINE_THREAD_STATE_SET_SP,
but on x86_64 we additionally align the stack pointer.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230517191436.73636-3-bugaevc@gmail.com>
This hasn't caused any problems yet but we are passing a pointer to struct
task_thread_times_info which can cause problems if we populate over the
existing size of the struct.
Message-Id: <ZGRDDNcOM2hA3CuT@jupiter.tail36e24.ts.net>
Reflow Makefile.
Sort using scripts/sort-makefile-lines.py.
Code generation is changed as routines are linked in sorted order
as expected.
No regressions on x86_64 and i686.
The last loop could attempt to overflow beyond INT_MAX on 32-bit
architectures.
Also switch to GNU style.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.3. (There are no new
constants covered by these tests in 6.3 that need any other header
changes.)
Tested with build-many-glibcs.py.
So I was able to reproduce the hangs in the original source, and debug
it, and fix it. In doing so, I realized that we can't use anything
complex to trigger the thread because that "anything" might also cause
the expected segfault and force everything out of sync again.
Here's what I ended up with, and it doesn't seem to hang where the
original one hung quite often (in a tight while..end loop). The key
changes are:
1. Calls to futex are error checked, with retries, to ensure that the
futexes are actually doing what they're supposed to be doing. In the
original code, nearly every futex call returned an error.
2. The main loop has checks for whether the thread ran or not, and
"unlocks" the thread if it didn't (this is how the original source
hangs).
Note: the usleep() is not for timing purposes, but just to give the
kernel an excuse to run the other thread at that time. The test will
not hang without it, but is more likely to test the right bugfix
if the usleep() is present.
Test minimum and maximum long long values, zero, 32bit crossover points, and
part of the range of long long values. Use '-fno-builtin' to ensure we are
testing the implementation.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Test minimum and maximum long values, zero, and part of the range
of long values. Use '-fno-builtin' to ensure we are testing the
implementation.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Test minimum and maximum int values, zero, and part of the range
of int values. Use '-fno-builtin' to ensure we are testing the
implementation.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
The real i386_thread_state Mach structure has an alignment of 8 on
x86_64. However, in struct sigcontext, the compiler was packing sc_gs
(which is the first member of sc_i386_thread_state) into the same 8-byte
slot as sc_error; this resulted in the rest of sc_i386_thread_state
members having wrong offsets relative to each other, and the overall
sc_i386_thread_state layout mismatching that of i386_thread_state.
Fix this by explicitly adding the required padding members, and
statically asserting that this results in the desired alignment.
The same goes for sc_i386_float_state.
Checked on x86_64-gnu.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230515083323.1358039-4-bugaevc@gmail.com>
sizeof (*stackframe) appears to be divisible by 16, but we should not
rely on that. So make sure to leave enough space for the stackframe
first, and then align the final pointer at 16 bytes.
Checked on x86_64-gnu.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230515083323.1358039-3-bugaevc@gmail.com>
Fixes 60f9bf9746
"hurd: Port trampoline.c to x86_64"
Checked on x86_64-gnu.
Reported-by: Bruno Haible <bruno@clisp.org>
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230515083323.1358039-2-bugaevc@gmail.com>
Reflow Makefile.
Sort using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reflow Makefile.
Sort using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reflow Makefile.
Sort using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reflow Makefile.
Sort using scripts/sort-makefile-lines.py.
Code generation is changed as routines are linked in sorted order
as expected.
No regressions on x86_64 and i686.
Reflow Makefile.
Sort using scripts/sort-makefile-lines.py.
Code generation is changed as routines are linked in sorted order
as expected.
No regressions on x86_64 and i686.
Reflow Makefile.
Sort using scripts/sort-makefile-lines.py.
Code generation is changed as routines are linked in sorted order
as expected.
No regressions on x86_64 and i686.
Fix list terminator whitspace.
Sort using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Fix list terminator whitspace.
Sort using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Calling fclose or freopen with a null FILE * is undefined behavior, and
doing so in practice will cause a SIGSEGV. So it seems suitable for
__nonnull.
This will help the compiler to warn for some buggy code, like
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=109570.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This change harmonizes the declaration and use of `is_nscd' and fixes a
build failure with the "--enable-static-nss --enable-nscd"
configuration options due to `is_nscd' being used undeclared.
The purpose of `is_nscd' is to avoid (nss <-> nscd) recursion in
dynamically linked libc (SHARED) that is nscd-aware (USE_NSCD), and so
its declaration and use should be guarded by the definition of those
macros.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux 6.3 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 6.3.
Tested with build-many-glibcs.py.
While mach/kern_return.h happens to pull mach/machine/kern_return.h,
mach/machine/boolean.h, and mach/machine/vm_types.h (and realpath-ing them
exposes the machine-specific machine symlink content), those headers do not
actually define anything machine-specific for the content of errno.h.
So we can just rule out these machine-specific from the dependency
comment.
We already did the same change for Hurd
(https://git.savannah.gnu.org/cgit/hurd/hurd.git/commit/?id=ef5924402864ef049f40a39e73967628583bc1a4)
Due to MiG requiring the subsystem to be defined early in order to know the
size of a port, this was causing a division by zero error during ./configure.
We could have just move subsystem to the top of the snippet, however it is
simpler to just remove the check given that we have no plans to use some other
MiG anyway.
HAVE_MIG_RETCODE is removed completely since this will be a no-op either
way (compiling against old Hurd headers will work the same, new Hurd
headers will result in the same stubs since retcode is a no-op).
Message-Id: <ZFspor91aoMwbh9T@jupiter.tail36e24.ts.net>
This patch redirects the error functions to the appropriate
longdouble variants which enables the compiler to optimize
for the abi ieeelongdouble.
Signed-off-by: Sachin Monga <smonga@linux.ibm.com>
Reflow all long lines adding comment terminators.
Sort all reflowed text using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The scripts/sort-makefile-lines.py script sorts Makefile variables
according to project expected order.
The script can be used like this:
$ scripts/sort-makefile-lines.py < elf/Makefile > elf/Makefile.tmp
$ mv elf/Makefile.tmp elf/Makefile
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>