Only the placeholder compatibility symbols are left now.
The __errno_location symbol was removed (moved) using
scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch moves the vDSO setup from libc to loader code, just after
the vDSO link_map setup. For static case the initialization
is moved to _dl_non_dynamic_init instead.
Instead of using the mangled pointer, the vDSO data is set as
attribute_relro (on _rtld_global_ro for shared or _dl_vdso_* for
static). It is read-only even with partial relro.
It fixes BZ#24967 now that the vDSO pointer is setup earlier than
malloc interposition is called.
Also, vDSO calls should not be a problem for static dlopen as
indicated by BZ#20802. The vDSO pointer would be zero-initialized
and the syscall will be issued instead.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, powerpc64le-linux-gnu, powerpc64-linux-gnu,
powerpc-linux-gnu, s390x-linux-gnu, sparc64-linux-gnu, and
sparcv9-linux-gnu. I also run some tests on mips.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Linux only supports the required ISA sysctls on StrongARM devices,
which are armv4 and no longer tested during glibc development
and probably bit-rotted by this point. (No reported test results,
and the last discussion of armv4 support was in the glibc 2.19
release notes.)
This patch consolidates all Linux setrlimit and getrlimit on the default
sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions:
1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19
and higher due a broken RLIM64_INFINITY constant.
2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB
limit. I am not sure if it is required, but a RLIM_INFINITY fix [1]
change its definition without adding a compat symbol. This patch does
not aim to address this possible issue, it follow current symbol
export.
The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64)
and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This
code path is only used on kernel older than 2.6.36 (basically now only x86)
and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once
x86 moves to be on par with other architectures regarding minimum kernel
supported we can get rid of using old syscalls and default path.
A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as
default for 64 bits ports. This allows the default implementation to avoid
{get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit.
Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a
sanity build plus check-abi on all other supported architectures.
[1] Commit 9c96ff2385
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Yury Norov <ynorov@caviumnetworks.com>
* bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define.
* sysdeps/unix/sysv/linux/alpha/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/generic/bits/typesizes.h
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/typesizes.h
[__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__]
(__RLIM_T_MATCHES_RLIM64_T): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource]
(sysdep_routines): Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource]
(sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
[$(subdir) = resource] (sysdep_routines): Likewise.
* sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file.
* sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise.
* sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove
setrlimit and getrlimit.
* sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/getrlimit.c: New file.
* sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise.
* sysdeps/unix/sysv/linux/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle
__RLIM_T_MATCHES_RLIM64_T and add alias if defined.
(__old_getrlimit64): Add compatibility symbol.
* sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
Beginning with the upcoming 4.1 release, Linux on a subset of 32-bit
ARM hardware will provide fast user-space implementations of the
following system calls:
- gettimeofday
- clock_gettime
The kernel implementation depends on the ARMv7 Generic Timers
Extension to accelerate these system calls. So CPUs such as
Cortex-A15 and -A7 benefit, while Cortex-A9, -A8, and pre-v7 CPUs do
not. On systems where the VDSO does not provide any speedup, the
kernel prevents the relevant symbol lookups from succeeding.
On OMAP5 (Cortex-A15) gettimeofday latency decreases from ~350ns to
~120ns. On BeagleBone Black (Cortex-A8) it goes from ~650ns to
~660ns, which to my mind is an acceptable cost.
Verified that no new test failures are introduced on kernels with and
without the VDSO.
* sysdeps/unix/sysv/linux/arm/Makefile: (sysdep_routines):
Include dl-vdso.
* sysdeps/unix/sysv/linux/arm/init-first.c: New file:
Use VDSO routines for gettimeofday, clock_gettime if
available.
* sysdeps/unix/sysv/linux/arm/libc-vdso.h: New file:
Declare VDSO symbols.
* sysdeps/unix/sysv/linux/arm/sysdep.h:
[HAVE_GETTIMEOFDAY_VSYSCALL]: Define.
[HAVE_CLOCK_GETTIME_VSYSCALL]: Define.
* sysdeps/unix/sysv/linux/arm/Versions: Add
__vdso_clock_gettime.
This patch eliminates the mixture of SONAME information in
shlib-versions files and SONAME information used to generate
gnu/lib-names.h in makefiles, with the information in the makefiles
being removed so all this information comes from the shlib-versions
files.
So that gnu/lib-names.h supports multiple ABIs, it is changed to be
generated on the same basis as gnu/stubs.h: when there are multiple
ABIs, gnu/lib-names.h is a wrapper header (the same header installed
whatever ABI is being built) and separate headers such as
gnu/lib-names-64.h contain the substantive contents (only one such
header being installed by any glibc build).
The rules for building gnu/lib-names.h were moved from Makeconfig to
Makerules because they need to come after sysdeps makefiles are
included (now that "ifndef abi-variants" is a toplevel conditional on
the rules rather than $(abi-variants) being evaluated later inside the
commands for a rule).
Tested for x86_64 and x86 that the installed shared libraries are
unchanged by this patch, and examined the installed gnu/lib-names*.h
headers by hand. Also tested the case of a single ABI (where there is
just a single header installed, again like stubs.h) by hacking
abi-variants to empty for x86_64.
[BZ #14171]
* Makeconfig [$(build-shared) = yes]
($(common-objpfx)soversions.mk): Don't handle SONAMEs specified in
makefiles.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.h): Remove rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.stmp): Likewise. Split and moved
to Makerules.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(before-compile): Don't append $(common-objpfx)gnu/lib-names.h
here.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Don't append gnu/lib-names.h and
gnu/lib-names.stmp here.
* Makerules [$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-h-abi): New variable.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-stmp-abi): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (before-compile): Append
$(common-objpfx)$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (common-generated): Append gnu/lib-names.h.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (install-others-nosubdir): Depend on
$(inst_includedir)/$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] ($(common-objpfx)gnu/lib-names.h): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-h-abi)): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-stmp-abi)): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Append $(lib-names-h-abi) and
$(lib-names-stmp-abi).
* scripts/lib-names.awk: Do not handle multi being set.
* sysdeps/unix/sysv/linux/aarch64/Makefile (abi-lp64-ld-soname):
Remove variable.
(abi-lp64_be-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile (abi-soft-ld-soname):
Likewise.
(abi-hard-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/i386/shlib-versions: New file.
* sysdeps/unix/sysv/linux/mips/Makefile (abi-o32_soft-ld-soname):
Remove variable.
(abi-o32_hard-ld-soname): Likewise.
(abi-o32_soft_2008-ld-soname): Likewise.
(abi-o32_hard_2008-ld-soname): Likewise.
(abi-n32_soft-ld-soname): Likewise.
(abi-n32_hard-ld-soname): Likewise.
(abi-n32_soft_2008-ld-soname): Likewise.
(abi-n32_hard_2008-ld-soname): Likewise.
(abi-n64_soft-ld-soname): Likewise.
(abi-n64_hard-ld-soname): Likewise.
(abi-n64_soft_2008-ld-soname): Likewise.
(abi-n64_hard_2008-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/Makefile (abi-64-v1-ld-soname):
Likewise.
(abi-64-v2-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Add
ld.so entries.
* sysdeps/unix/sysv/linux/s390/Makefile (abi-64-ld-soname): Remove
variable.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86/Makefile (abi-32-ld-soname): Remove
variable.
(abi-64-ld-soname): Likewise.
(abi-x32-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
I've moved the ARM port from ports to the main sysdeps hierarchy.
Beyond the README update, the move of the files was simply
git mv ports/sysdeps/arm sysdeps/arm
git mv ports/sysdeps/unix/arm sysdeps/unix/arm
git mv ports/sysdeps/unix/sysv/linux/arm sysdeps/unix/sysv/linux/arm
and in addition to the ChangeLog entries here, I put a note at the top
of ports/ChangeLog.arm similar to that at the top of
ChangeLog.powerpc. There is deliberately no NEWS change, as I think
it makes the most sense to put in a general note above all ports
having moved if we can achieve that for 2.20.
Tested that disassembly of installed shared libraries for arm is the
same before and after this patch, except for data (not instructions)
in ld.so (there are assertions in sysdeps/arm/dl-machine.h, and the
path by which that file is found, and so by which it appears in the
assertion message, changes as a result of the move).
* sysdeps/arm: Move directory from ports/sysdeps/arm.
* sysdeps/unix/arm: Move directory from ports/sysdeps/unix/arm.
* sysdeps/unix/sysv/linux/arm: Move directory from
ports/sysdeps/unix/sysv/linux/arm.
* README: Update listing for arm-*-linux-gnueabi.
ports/ChangeLog.arm:
* sysdeps/arm: Move directory to ../sysdeps/arm.
* sysdeps/unix/arm: Move directory to ../sysdeps.arm.
* sysdeps/unix/sysv/linux/arm: Move directory to
../sysdeps/unix/sysv/linux/arm.
2000-08-01 Philip Blundell <philb@gnu.org>
* sysdeps/unix/sysv/linux/arm/Makefile [subdir=resource]
(sysdep_routines): Add oldgetrlimit, oldsetrlimit.
* sysdeps/unix/sysv/linux/arm/syscalls.list: Add oldgetrlimit,
oldsetrlimit for GLIBC_2.0.
(LINE_PARSER): Allow any number of spaces between ip address and
number. Fixes PR libc/1833, reported by rp010gf@voruta.vu.lt.
* nis/nss_nisplus/nisplus-hosts.c (_nss_nisplus_getipnodebyname_r):
Likewise.
* Make-dist (dist): Resolve `..' in file names.
2000-01-23 Mark Kettenis <kettenis@gnu.org>
* inet/rexec.c (rexec_af): Use SA_LEN instead of __libc_sa_len.
2000-01-22 Thorsten Kukuk <kukuk@suse.de>
* sunrpc/xdr_rec.c: Don't set frag_sent if no more data,
fixes part 2 of bug 1549.
* sunrpc/rpc_des.h: Remove unused defines.
2000-01-22 Mark Kettenis <kettenis@gnu.org>
* intl/Makefile ($(objpfx)msgs.h): Do $(make-target-directory) first.
2000-01-22 Thorsten Kukuk <kukuk@suse.de>
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Remove sys/io.h.
* sysdeps/unix/sysv/linux/alpha/Makefile: Add sys/io.h.
* sysdeps/unix/sysv/linux/arm/Makefile: Likewise.
* sysdeps/unix/sysv/linux/i386/Makefile: Likewise.
* sysdeps/unix/sysv/linux/sys/io.h: Move from here ...
* sysdeps/unix/sysv/linux/i386/sys/io.h: ... to here, add inb, outb
and other inline functions for port access.
* sysdeps/unix/sysv/linux/alpha/sys/io.h: Add prototypes for port
access functions.
2000-01-23 Ulrich Drepper <drepper@cygnus.com>
* iconv/gconv_simple.c: Fix two problems in UTF-8 decoder.
Patch by Bruno Haibe <haible@ilog.fr>.
1999-04-12 Philip Blundell <philb@gnu.org>
* elf/elf.h: Update ARM definitions to match current gas2.
* sysdeps/arm/bits/endian.h: Support big endian operation.
* sysdeps/unix/sysv/linux/arm/ioperm.c (_outw, _outb, _outl):
Don't bother range checking the port number.
* sysdeps/unix/sysv/linux/arm/vfork.S: New file.
* sysdeps/unix/sysv/linux/arm/sysdep.h (INLINE_SYSCALL): Include
the syscall name in assembler output for ease of debugging.
* sysdeps/unix/sysv/linux/arm/sigaction.c: Don't rely on undefined
compiler behaviour.
* sysdeps/unix/sysv/linux/arm/sigrestorer.S: New file.
* sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = signal]
(sysdep_routines): Add sigrestorer.
* string/tester.c (test_strcpy): Add new tests for unaligned
arguments.
* sysdeps/arm/bits/string.h: Delete inline implementations of
strcpy and stpcpy.
* sysdeps/unix/opendir.c: Use O_DIRECTORY if available. If not
available double check to verify it's a directory.
* sysdeps/unix/sysv/linux/alpha/bits/fcntl.h: Add O_DIRECTORY.
* sysdeps/unix/sysv/linux/mips/bits/fcntl: Likewise.
* sysdeps/unix/sysv/linux/bits/fcntl.h: Remove O_* constants which
are not generally available.
* sysdeps/unix/sysv/linux/i386/bits/fcntl.h: New file.
* sysdeps/unix/sysv/linux/i386/setgroups.c: Add range check for values.
* sysdeps/unix/sysv/linux/arm/Makefile: New file.
* sysdeps/unix/sysv/linux/arm/setegid.c: New file.
* sysdeps/unix/sysv/linux/arm/seteuid.c: New file.
* sysdeps/unix/sysv/linux/arm/setfsgid.c: New file.
* sysdeps/unix/sysv/linux/arm/setfsuid.c: New file.
* sysdeps/unix/sysv/linux/arm/setgid.c: New file.
* sysdeps/unix/sysv/linux/arm/setgroups.c: New file.
* sysdeps/unix/sysv/linux/arm/setresgid.c: New file.
* sysdeps/unix/sysv/linux/arm/setresuid.c: New file.
* sysdeps/unix/sysv/linux/arm/setuid.c: New file.
* sysdeps/unix/sysv/linux/i386/setegid.c: New file.
* sysdeps/unix/sysv/linux/i386/seteuid.c: New file.
* sysdeps/unix/sysv/linux/i386/setfsgid.c: New file.
* sysdeps/unix/sysv/linux/i386/setfsuid.c: New file.
* sysdeps/unix/sysv/linux/i386/setgid.c: New file.
* sysdeps/unix/sysv/linux/i386/setgroups.c: New file.
* sysdeps/unix/sysv/linux/i386/setresgid.c: New file.
* sysdeps/unix/sysv/linux/i386/setresuid.c: New file.
* sysdeps/unix/sysv/linux/i386/setuid.c: New file.
* sysdeps/unix/sysv/linux/m68k/setegid.c: New file.
* sysdeps/unix/sysv/linux/m68k/seteuid.c: New file.
* sysdeps/unix/sysv/linux/m68k/setfsgid.c: New file.
* sysdeps/unix/sysv/linux/m68k/setfsuid.c: New file.
* sysdeps/unix/sysv/linux/m68k/setgid.c: New file.
* sysdeps/unix/sysv/linux/m68k/setgroups.c: New file.
* sysdeps/unix/sysv/linux/m68k/setresgid.c: New file.
* sysdeps/unix/sysv/linux/m68k/setresuid.c: New file.
* sysdeps/unix/sysv/linux/m68k/setuid.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/setegid.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/seteuid.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/setfsgid.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/setfsuid.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/setgid.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/setgroups.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/setresgid.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/setresuid.c: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/setuid.c: New file.
* sysdeps/unix/sysv/linux/arm/syscalls.list: Add s_setgid, s_setresuid,
s_setresgid, and s_setuid.
* sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/m68k/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise.
* sysdeps/unix/sysv/linux/i386/Makefile [subdir=misc]
(sysdep_routines): Add setfsgid, setfsuid, setresgid, and setresuid.
* sysdeps/unix/sysv/linux/m68k/Makefile: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/Makefile: Likewise.
1998-10-16 Ulrich Drepper <drepper@cygnus.com>
* iconv/skeleton.c: Include ELF header only of STATIC_GCONV is not
