When running the testsuite in parallel, for instance running make -j
$(nproc) check, occasionally tst-epoll fails with a timeout. It happens
because it sometimes takes a bit more than 10ms for the process to get
cloned and blocked by the syscall. In that case the signal is
sent to early, and the test fails with a timeout.
Checked on x86_64-linux-gnu.
Similar to sparc32 fix, remove the unwind information on the signal
return stubs. This fixes the regressions:
FAIL: nptl/tst-cancel24-static
FAIL: nptl/tst-cond8-static
FAIL: nptl/tst-mutex8-static
FAIL: nptl/tst-mutexpi8-static
FAIL: nptl/tst-mutexpi9
On sparc64-linux-gnu.
The functions were previously written in C, but were not compiled
with unwind information. The ENTRY/END macros includes .cfi_startproc
and .cfi_endproc which adds unwind information. This caused the
tests cleanup-8 and cleanup-10 in the GCC testsuite to fail.
This patch adds a version of the ENTRY/END macros without the
CFI instructions that can be used instead.
sigaction registers a restorer address that is located two instructions
before the stub function. This patch adds a two instruction padding to
avoid that the unwinder accesses the unwind information from the function
that the linker has placed right before it in memory. This fixes an issue
with pthread_cancel that caused tst-mutex8-static (and other tests) to fail.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.7. (There are no new
constants covered by these tests in 6.7 that need any other header
changes.)
Tested with build-many-glibcs.py.
Linux 6.7 adds the futex_requeue, futex_wait and futex_wake syscalls,
and enables map_shadow_stack for architectures previously missing it.
Update syscall-names.list and regenerate the arch-syscall.h headers
with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Systemd execution environment configuration may prohibit changing a memory
mapping to become executable:
MemoryDenyWriteExecute=
Takes a boolean argument. If set, attempts to create memory mappings
that are writable and executable at the same time, or to change existing
memory mappings to become executable, or mapping shared memory segments
as executable, are prohibited.
When it is set, systemd service stops working if PLT rewrite is enabled.
Check if mprotect works before rewriting PLT. This fixes BZ #31230.
This also works with SELinux when deny_execmem is on.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The 551101e824 change is incorrect for
alpha and sparc, since __NR_stat is defined by both kABI. Use
__NR_newfstat to check whether to fallback to __NR_fstat64 (similar
to what fstatat64 does).
Checked on sparc64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Remove the error handling wrapper from exp10. This is very similar to
the changes done to exp and exp2, except that we also need to handle
pow10 and pow10l.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The __getrandom_nocancel function returns errors as negative values
instead of errno. This is inconsistent with other _nocancel functions
and it breaks "TEMP_FAILURE_RETRY (__getrandom_nocancel (p, n, 0))" in
__arc4random_buf. Use INLINE_SYSCALL_CALL instead of
INTERNAL_SYSCALL_CALL to fix this issue.
But __getrandom_nocancel has been avoiding from touching errno for a
reason, see BZ 29624. So add a __getrandom_nocancel_nostatus function
and use it in tcache_key_initialize.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
CET feature bits in TCB, which are Linux specific, are used to check if
CET features are active. Move CET feature check to Linux/x86 directory.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
1. Remove _dl_runtime_resolve_shstk and _dl_runtime_profile_shstk.
2. Move CET offsets from x86 cpu-features-offsets.sym to x86-64
features-offsets.sym.
3. Rename x86 cet-control.h to x86-64 feature-control.h since it is only
for x86-64 and also used for PLT rewrite.
4. Add x86-64 ldsodefs.h to include feature-control.h.
5. Change TUNABLE_CALLBACK (set_plt_rewrite) to x86-64 only.
6. Move x86 dl-procruntime.c to x86-64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
CET is only support for x86_64, this patch reverts:
- faaee1f07e x86: Support shadow stack pointer in setjmp/longjmp.
- be9ccd27c0 i386: Add _CET_ENDBR to indirect jump targets in
add_n.S/sub_n.S
- c02695d776 x86/CET: Update vfork to prevent child return
- 5d844e1b72 i386: Enable CET support in ucontext functions
- 124bcde683 x86: Add _CET_ENDBR to functions in crti.S
- 562837c002 x86: Add _CET_ENDBR to functions in dl-tlsdesc.S
- f753fa7dea x86: Support IBT and SHSTK in Intel CET [BZ #21598]
- 825b58f3fb i386-mcount.S: Add _CET_ENDBR to _mcount and __fentry__
- 7e119cd582 i386: Use _CET_NOTRACK in i686/memcmp.S
- 177824e232 i386: Use _CET_NOTRACK in memcmp-sse4.S
- 0a899af097 i386: Use _CET_NOTRACK in memcpy-ssse3-rep.S
- 7fb613361c i386: Use _CET_NOTRACK in memcpy-ssse3.S
- 77a8ae0948 i386: Use _CET_NOTRACK in memset-sse2-rep.S
- 00e7b76a8f i386: Use _CET_NOTRACK in memset-sse2.S
- 90d15dc577 i386: Use _CET_NOTRACK in strcat-sse2.S
- f1574581c7 i386: Use _CET_NOTRACK in strcpy-sse2.S
- 4031d7484a i386/sub_n.S: Add a missing _CET_ENDBR to indirect jump
- target
-
Checked on i686-linux-gnu.
The CET is only supported for x86_64 and there is no plan to add
kernel support for i386. Move the Makefile rules and files from the
generic x86 folder to x86_64 one.
Checked on x86_64-linux-gnu and i686-linux-gnu.
These describe generic AArch64 CPU features, and are not tied to a
kernel-specific way of determining them. We can share them between
the Linux and Hurd AArch64 ports.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240103171502.1358371-13-bugaevc@gmail.com>
setcontext and swapcontext put a restore token on the old shadow stack
which is used to restore the target shadow stack when switching user
contexts. When longjmp from a user context, the target shadow stack
can be different from the current shadow stack and INCSSP can't be
used to restore the shadow stack pointer to the target shadow stack.
Update longjmp to search for a restore token. If found, use the token
to restore the shadow stack pointer before using INCSSP to pop the
shadow stack. Stop the token search and use INCSSP if the shadow stack
entry value is the same as the current shadow stack pointer.
It is a user error if there is a shadow stack switch without leaving a
restore token on the old shadow stack.
The only difference between __longjmp.S and __longjmp_chk.S is that
__longjmp_chk.S has a check for invalid longjmp usages. Merge
__longjmp.S and __longjmp_chk.S by adding the CHECK_INVALID_LONGJMP
macro.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
C23 adds a header <stdbit.h> with various functions and type-generic
macros for bit-manipulation of unsigned integers (plus macro defines
related to endianness). Implement this header for glibc.
The functions have both inline definitions in the header (referenced
by macros defined in the header) and copies with external linkage in
the library (which are implemented in terms of those macros to avoid
duplication). They are documented in the glibc manual. Tests, as
well as verifying results for various inputs (of both the macros and
the out-of-line functions), verify the types of those results (which
showed up a bug in an earlier version with the type-generic macro
stdc_has_single_bit wrongly returning a promoted type), that the
macros can be used at top level in a source file (so don't use ({})),
that they evaluate their arguments exactly once, and that the macros
for the type-specific functions have the expected implicit conversions
to the relevant argument type.
Jakub previously referred to -Wconversion warnings in type-generic
macros, so I've included a test with -Wconversion (but the only
warnings I saw and fixed from that test were actually in inline
functions in the <stdbit.h> header - not anything coming from use of
the type-generic macros themselves).
This implementation of the type-generic macros does not handle
unsigned __int128, or unsigned _BitInt types with a width other than
that of a standard integer type (and C23 doesn't require the header to
handle such types either). Support for those types, using the new
type-generic built-in functions Jakub's added for GCC 14, can
reasonably be added in a followup (along of course with associated
tests).
This implementation doesn't do anything special to handle C++, or have
any tests of functionality in C++ beyond the existing tests that all
headers can be compiled in C++ code; it's not clear exactly what form
this header should take in C++, but probably not one using macros.
DIS ballot comment AT-107 asks for the word "count" to be added to the
names of the stdc_leading_zeros, stdc_leading_ones,
stdc_trailing_zeros and stdc_trailing_ones functions and macros. I
don't think it's likely to be accepted (accepting any technical
comments would mean having an FDIS ballot), but if it is accepted at
the WG14 meeting (22-26 January in Strasbourg, starting with DIS
ballot comment handling) then there would still be time to update
glibc for the renaming before the 2.39 release.
The new functions and header are placed in the stdlib/ directory in
glibc, rather than creating a new toplevel stdbit/ or putting them in
string/ alongside ffs.
Tested for x86_64 and x86.
For the ZA lazy saving scheme to work, setcontext has to call
__libc_arm_za_disable.
Also fixes swapcontext which uses setcontext internally.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Previously, CET was enabled by kernel before passing control to user
space and the startup code must disable CET if applications or shared
libraries aren't CET enabled. Since the current kernel only supports
shadow stack and won't enable shadow stack before passing control to
user space, we need to enable shadow stack during startup if the
application and all shared library are shadow stack enabled. There
is no need to disable shadow stack at startup. Shadow stack can only
be enabled in a function which will never return. Otherwise, shadow
stack will underflow at the function return.
1. GL(dl_x86_feature_1) is set to the CET features which are supported
by the processor and are not disabled by the tunable. Only non-zero
features in GL(dl_x86_feature_1) should be enabled. After enabling
shadow stack with ARCH_SHSTK_ENABLE, ARCH_SHSTK_STATUS is used to check
if shadow stack is really enabled.
2. Use ARCH_SHSTK_ENABLE in RTLD_START in dynamic executable. It is
safe since RTLD_START never returns.
3. Call arch_prctl (ARCH_SHSTK_ENABLE) from ARCH_SETUP_TLS in static
executable. Since the start function using ARCH_SETUP_TLS never returns,
it is safe to enable shadow stack in ARCH_SETUP_TLS.
Sync with Linux kernel 6.6 shadow stack interface. Since only x86-64 is
supported, i386 shadow stack codes are unchanged and CET shouldn't be
enabled for i386.
1. When the shadow stack base in TCB is unset, the default shadow stack
is in use. Use the current shadow stack pointer as the marker for the
default shadow stack. It is used to identify if the current shadow stack
is the same as the target shadow stack when switching ucontexts. If yes,
INCSSP will be used to unwind shadow stack. Otherwise, shadow stack
restore token will be used.
2. Allocate shadow stack with the map_shadow_stack syscall. Since there
is no function to explicitly release ucontext, there is no place to
release shadow stack allocated by map_shadow_stack in ucontext functions.
Such shadow stacks will be leaked.
3. Rename arch_prctl CET commands to ARCH_SHSTK_XXX.
4. Rewrite the CET control functions with the current kernel shadow stack
interface.
Since CET is no longer enabled by kernel, a separate patch will enable
shadow stack during startup.
Compilers may emit calls to 'half-width' routines (two-lane
single-precision variants). These have been added in the form of
wrappers around the full-width versions, where the low half of the
vector is simply duplicated. This will perform poorly when one lane
triggers the special-case handler, as there will be a redundant call
to the scalar version, however this is expected to be rare at Ofast.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The tunable parsing duplicates the tunable environment variable so it
null-terminates each one since it simplifies the later parsing. It has
the drawback of adding another point of failure (__minimal_malloc
failing), and the memory copy requires tuning the compiler to avoid mem
operations calls.
The parsing now tracks the tunable start and its size. The
dl-tunable-parse.h adds helper functions to help parsing, like a strcmp
that also checks for size and an iterator for suboptions that are
comma-separated (used on hwcap parsing by x86, powerpc, and s390x).
Since the environment variable is allocated on the stack by the kernel,
it is safe to keep the references to the suboptions for later parsing
of string tunables (as done by set_hwcaps by multiple architectures).
Checked on x86_64-linux-gnu, powerpc64le-linux-gnu, and
aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
So far if the ucontext structure was obtained by getcontext and co,
the return address was stored in general purpose register 14 as
it is defined as return address in the ABI.
In contrast, the context passed to a signal handler contains the address
in psw.addr field.
If somebody e.g. wants to dump the address of the context, the origin
needs to be known.
Now this patch adjusts getcontext and friends and stores the return address
also in psw.addr field.
Note that setcontext isn't adjusted and it is not supported to pass a
ucontext structure from signal-handler to setcontext. We are not able to
restore all registers and branching to psw.addr without clobbering one
register.
This patch reserves space for HWCAP3/HWCAP4 in the TCB of powerpc.
These hardware capabilities bits will be used by future Power
architectures.
Versioned symbol '__parse_hwcap_3_4_and_convert_at_platform' advertises
the availability of the new HWCAP3/HWCAP4 data in the TCB.
This is an ABI change for GLIBC 2.39.
Suggested-by: Peter Bergner <bergner@linux.ibm.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
It is not strictly required by the POSIX, since O_PATH is a Linux
extension, but it is QoI to fail early instead of at readdir. Also
the check is free, since fdopendir already checks if the file
descriptor is opened for read.
Checked on x86_64-linux-gnu.
A recent commit, apparently commit
6c6fce572f "elf: Remove /etc/suid-debug
support", resulted in localplt failures for i686-gnu and x86_64-gnu:
Missing required PLT reference: ld.so: __access_noerrno
After that commit, __access_noerrno is actually no longer used at all.
So rather than just removing the localplt expectation for that symbol
for Hurd, completely remove all definitions of and references to that
symbol.
Tested for x86_64, and with build-many-glibcs.py for i686-gnu and
x86_64-gnu.
This restore the 2.33 semantic for arena_get2. It was changed by
11a02b035b to avoid arena_get2 call malloc (back when __get_nproc
was refactored to use an scratch_buffer - 903bc7dcc2). The
__get_nproc was refactored over then and now it also avoid to call
malloc.
The 11a02b035b did not take in consideration any performance
implication, which should have been discussed properly. The
__get_nprocs_sched is still used as a fallback mechanism if procfs
and sysfs is not acessible.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
The strlen might trigger and invalid GOT entry if it used before
the process is self-relocated (for instance on dl-tunables if any
error occurs).
For i386, _dl_writev with PIE requires to use the old 'int $0x80'
syscall mode because the calling the TLS register (gs) is not yet
initialized.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Linux 6.6 (09da082b07bbae1c) added support for fchmodat2, which has
similar semantics as fchmodat with an extra flag argument. This
allows fchmodat to implement AT_SYMLINK_NOFOLLOW and AT_EMPTY_PATH
without the need for procfs.
The syscall is registered on all architectures (with value of 452
except on alpha which is 562, commit 78252deb023cf087).
The tst-lchmod.c requires a small fix where fchmodat checks two
contradictory assertions ('(st.st_mode & 0777) == 2' and
'(st.st_mode & 0777) == 3').
Checked on x86_64-linux-gnu on a 6.6 kernel.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The latest implementations of memcpy are actually faster than the Falkor
implementations [1], so remove the falkor/phecda ifuncs for memcpy and
the now unused IS_FALKOR/IS_PHECDA defines.
[1] https://sourceware.org/pipermail/libc-alpha/2022-December/144227.html
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The PR_SET_VMA_ANON_NAME support is only enabled through a configurable
kernel switch, mainly because assigning a name to a
anonymous virtual memory area might prevent that area from being
merged with adjacent virtual memory areas.
For instance, with the following code:
void *p1 = mmap (NULL,
1024 * 4096,
PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS,
-1,
0);
void *p2 = mmap (p1 + (1024 * 4096),
1024 * 4096,
PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS,
-1,
0);
The kernel will potentially merge both mappings resulting in only one
segment of size 0x800000. If the segment is names with
PR_SET_VMA_ANON_NAME with different names, it results in two mappings.
Although this will unlikely be an issue for pthread stacks and malloc
arenas (since for pthread stacks the guard page will result in
a PROT_NONE segment, similar to the alignment requirement for the arena
block), it still might prevent the mmap memory allocated for detail
malloc.
There is also another potential scalability issue, where the prctl
requires
to take the mmap global lock which is still not fully fixed in Linux
[1] (for pthread stacks and arenas, it is mitigated by the stack
cached and the arena reuse).
So this patch disables anonymous mapping annotations as default and
add a new tunable, glibc.mem.decorate_maps, can be used to enable
it.
[1] https://lwn.net/Articles/906852/
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Linux 5.17 added support to naming anonymous virtual memory areas
through the prctl syscall. The __set_vma_name is a wrapper to avoid
optimizing the prctl call if the kernel does not support it.
If the kernel does not support PR_SET_VMA_ANON_NAME, prctl returns
EINVAL. And it also returns the same error for an invalid argument.
Since it is an internal-only API, it assumes well-formatted input:
aligned START, with (START, START+LEN) being a valid memory range,
and NAME with a limit of 80 characters without an invalid one
("\\`$[]").
Reviewed-by: DJ Delorie <dj@redhat.com>
Commit 7f602256ab moved the tst-rfc3484*
tests from posix/ to nss/, but didn't correct references to point to
their new subdir when building for mach and arm. This commit fixes
that.
Tested with build-many-glibcs.sh for i686-gnu.
