This patch fixes SSE4.2 libmvec atan2 function accuracy for following
inputs to less than 4 ulps.
{0x1.bcab29da0e947p-54,0x1.bc41f4d2294b8p-54} 4.19888 ulps
{0x1.b836ed678be29p-588,0x1.b7be6f5a03a8cp-588} 4.09889 ulps
This fixes BZ #28765.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Some functions (e.g. stpcpy, pread64, etc.) had moved to POSIX in the
main headers as they got incorporated into the standard, but their
fortified variants remained under __USE_GNU. As a result, these
functions did not get fortified when _GNU_SOURCE was not defined.
Add test wrappers that check all functions tested in tst-chk0 at all
levels with _GNU_SOURCE undefined and then use the failures to (1)
exclude checks for _GNU_SOURCE functions in these tests and (2) Fix
feature macro guards in the fortified function headers so that they're
the same as the ones in the main headers.
This fixes BZ #28746.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Rename debug/tst-chk1.c to debug/tst-fortify.c and add make hackery to
autogenerate tests with different macros enabled to build and run the
same test with different configurations as well as different
fortification levels.
The change also ends up expanding the -lfs tests to include
_FORTIFY_SOURCE=3.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It is not used to build installed programs. It also fixes
resolv/tst-p_secstodate on big endian machines.
Checked on i686-linux-gnu and powerpc-linux-gnu-power4.
The __convert_scm_timestamps() only updates the control message last
pointer for SOL_SOCKET type, so if the message control buffer contains
multiple ancillary message types the converted timestamp one might
overwrite a valid message.
The test check if the extra ancillary space is correctly handled
by recvmsg/recvmmsg, where if there is no extra space for the 64-bit
time_t converted message the control buffer should be marked with
MSG_TRUNC. It also check if recvmsg/recvmmsg handle correctly multiple
ancillary data.
Checked on x86_64-linux and on i686-linux-gnu on both 5.11 and
4.15 kernel.
Co-authored-by: Fabian Vogt <fvogt@suse.de>
Check if the socket support 64-bit network packages timestamps
(SO_TIMESTAMP and SO_TIMESTAMPNS). This will be used on recvmsg
and recvmmsg tests to check if the timestamp should be generated.
The usage of internal static symbol for statically linked binaries
does not work correctly for objects built with -D_TIME_BITS=64,
since the internal definition does not provide the expected aliases.
This patch makes it to use the default stat functions instead (which
uses the default 64 time_t alias and types).
Checked on i686-linux-gnu.
gcc 12 now has support for the __builtin_dynamic_object_size builtin.
Adapt the macro checks to enable _FORTIFY_SOURCE=3 on gcc 12 and above.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The @refill command has been obsolete for a while and now texinfo has
started warning about it.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Indicates the availability of enhanced counter virtualization extension
of armv8.6-a with self-synchronized virtual counter CNTVCTSS_EL0 usable
in userspace.
Fixes [BZ# 28755] for wcsncmp by redirecting length >= 2^56 to
__wcscmp_evex. For x86_64 this covers the entire address range so any
length larger could not possibly be used to bound `s1` or `s2`.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Fixes [BZ# 28755] for wcsncmp by redirecting length >= 2^56 to
__wcscmp_avx2. For x86_64 this covers the entire address range so any
length larger could not possibly be used to bound `s1` or `s2`.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Converting double precision constants to float is now affected by the
runtime dynamic rounding mode instead of being evaluated at compile
time with default rounding mode (except static object initializers).
This can change the computed result and cause performance regression.
The known correctness issues (increased ulp errors) are already fixed,
this patch fixes remaining cases of unnecessary runtime conversions.
Add float M_* macros to math.h as new GNU extension API. To avoid
conversions the new M_* macros are used and instead of casting double
literals to float, use float literals (only required if the conversion
is inexact).
The patch was tested on aarch64 where the following symbols had new
spurious conversion instructions that got fixed:
__clog10f
__gammaf_r_finite@GLIBC_2.17
__j0f_finite@GLIBC_2.17
__j1f_finite@GLIBC_2.17
__jnf_finite@GLIBC_2.17
__kernel_casinhf
__lgamma_negf
__log1pf
__y0f_finite@GLIBC_2.17
__y1f_finite@GLIBC_2.17
cacosf
cacoshf
casinhf
catanf
catanhf
clogf
gammaf_positive
Fixes bug 28713.
Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
With the current set of fences, the version update at the start
of the TM write operation is redundant, and the version update
at the end does not need to use an atomic read-modify-write
operation.
Also use relaxed MO stores during the dlclose update, and skip any
version changes there.
Suggested-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
As explained in Hans Boehm, Can Seqlocks Get Along with Programming
Language Memory Models?, an acquire fence is needed in
_dlfo_read_success. The lack of a fence resulted in an observable
bug on powerpc64le compile-time load reordering.
The fence in _dlfo_mappings_begin_update has been reordered, turning
the fence/store sequence into a release MO store equivalent.
Relaxed MO loads are used on the reader side, and relaxed MO stores
on the writer side for the shared data, to avoid formal data races.
This is just to be conservative; it should not actually be necessary
given how the data is used.
This commit also fixes the test run time. The intent was to run it
for 3 seconds, but 0.3 seconds was enough to uncover the bug very
occasionally (while 3 seconds did not reliably show the bug on every
test run).
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Trapping SIGSEGV within the process is error-prone, adds security
issues, and modern analysis design tends to happen out of the
process (either by attaching a debugger or by post-mortem analysis).
The libSegfault also has some design problems, it uses non
async-signal-safe function (backtrace) on signal handler.
There are multiple alternatives if users do want to use similar
functionality, such as sigsegv gnulib module or libsegfault.
OpenRISC architecture specification:
https://raw.githubusercontent.com/openrisc/doc/master/openrisc-arch-1.3-rev1.pdf
Currently the port as of the 2022-01-03 rebasing there are no known
architecture specific test failures.
Writing credits for the port are:
Stafford Horne <shorne@gmail.com>
Christian Svensson <blue@cmd.nu>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Here we define the minumum linux kernel version at 5.4.0, as that is the
long term support version where 32-bit architectures start to support
64-bit time API's. The OpenRISC kernel had some bugs up until version 5.8
which caused issues with glibc fork/clone, they have been backported to
5.4 but not previous versions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
OpenRISC support hard float but I will like to submit that after glibc
soft float goes upstream. The hard float support depends on adding user
access to the FPCSR, which is not supported by the kernel yet.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
OpenRISC includes 3 TLS addressing models. Local Dynamic optimizations
are not done in the linker and therefore use the same code sequences as
Global Dynamic.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
DT_RUNPATH is only used to find the immediate dependencies of the
executable or shared object containing the DT_RUNPATH entry. Update
LD_AUDIT dlopen call to try the DT_RUNPATH entry of the executable.
Add tst-audit14a, which is copied from tst-audit14, to DT_RUNPATH and
build tst-audit14 with -Wl,--disable-new-dtags to test DT_RPATH.
This partially fixes BZ #28455.
Ports which are not in the ports table or dtable will not make sense for the
new program, so we can nuke them. Actually we shall, otherwise we would
be leaking various ports, for instance the file_t of the executed program
itself.
Add <dl-debug.h> to setup debugging entry in PT_DYNAMIC segment to support
DT_DEBUG, DT_MIPS_RLD_MAP_REL and DT_MIPS_RLD_MAP.
Tested on x86-64, x32 and i686 as well as with build-many-glibcs.py.
I've updated copyright dates in glibc for 2022. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus csu/version.c which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a small change to the copyright notice
in NEWS which should let NEWS get updated automatically next year.
Please remember to include 2022 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
