sysdeps/nptl/configure.ac tests for forced unwind support and the C
cleanup attribute, giving errors if either is unsupported. It does
nothing beyond running those two tests.
Both the attribute, and _Unwind_GetCFA which is used in the forced
unwind test, were added in GCC 3.3. Thus these tests are long
obsolete, and this patch removes the configure fragment running them,
along with associated conditionals.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* sysdeps/nptl/configure.ac: Remove file.
* sysdeps/nptl/configure: Remove generated file.
* configure.ac (libc_cv_forced_unwind): Do not substitute.
* configure: Regenerated.
* config.h.in (HAVE_FORCED_UNWIND): Remove #undef.
* config.make.in (have-forced-unwind): Remove variable.
* nptl/Makefile [$(have-forced-unwind) = yes]: Make code
unconditional.
* nptl/descr.h [HAVE_FORCED_UNWIND]: Likewise.
* nptl/unwind.c [HAVE_FORCED_UNWIND]: Likewise.
(__pthread_unwind) [!HAVE_FORCED_UNWIND]: Remove conditional code.
* nptl/version.c [HAVE_FORCED_UNWIND]: Make code unconditional.
* sysdeps/nptl/Makefile [$(have-forced-unwind) = yes]: Make code
unconditional.
This patch pthread cancellation tests to check for failures cases
wherer the syscall cancel wrapper should both set the error and
the errno values.
Tested on i686, x86_64, x32, powerpc64le, and aarch64.
* nptl/Makefile (tests): Add tst-cancel26.c and tst-cancel27.c.
* nptl/tst-cancel26.c: New file.
* nptl/tst-cancel27.c: Likewise.
The recently introduced TLS variables in the thread-local destructor
implementation (__cxa_thread_atexit_impl) used the default GD access
model, resulting in a call to __tls_get_addr. This causes a deadlock
with recent changes to the way TLS is initialized because DTV
allocations are delayed and hence despite knowing the offset to the
variable inside its TLS block, the thread has to take the global rtld
lock to safely update the TLS offset.
This causes deadlocks when a thread is instantiated and joined inside
a destructor of a dlopen'd DSO. The correct long term fix is to
somehow not take the lock, but that will need a lot deeper change set
to alter the way in which the big rtld lock is used.
Instead, this patch just eliminates the call to __tls_get_addr for the
thread-local variables inside libc.so, libpthread.so and rtld by
building all of their units with -mtls-model=initial-exec.
There were concerns that the static storage for TLS is limited and
hence we should not be using it. Additionally, dynamically loaded
modules may result in libc.so looking for this static storage pretty
late in static binaries. Both concerns are valid when using TLSDESC
since that is where one may attempt to allocate a TLS block from
static storage for even those variables that are not IE. They're not
very strong arguments for the traditional TLS model though, since it
assumes that the static storage would be used sparingly and definitely
not by default. Hence, for now this would only theoretically affect
ARM architectures.
The impact is hence limited to statically linked binaries that dlopen
modules that in turn load libc.so, all that on arm hardware. It seems
like a small enough impact to justify fixing the larger problem that
currently affects everything everywhere.
This still does not solve the original problem completely. That is,
it is still possible to deadlock on the big rtld lock with a small
tweak to the test case attached to this patch. That problem is
however not a regression in 2.22 and hence could be tackled as a
separate project. The test case is picked up as is from Alex's patch.
This change has been tested to verify that it does not cause any
issues on x86_64.
ChangeLog:
[BZ #18457]
* nptl/Makefile (tests): New test case tst-join7.
(modules-names): New test case module tst-join7mod.
* nptl/tst-join7.c: New file.
* nptl/tst-join7mod.c: New file.
* Makeconfig (tls-model): Pass -ftls-model=initial-exec for
all translation units in libc.so, libpthread.so and rtld.
and also powerpc64 and powerpc64le. See the discussion in the thread
below for details. This change reverts the problematic bits leaving
the added test in place and marking XFAIL in anticipation of fixing
the bug in the near future.
https://sourceware.org/ml/libc-alpha/2015-07/msg00141.html
[BZ #18435]
* nptl/pthreadP.h (pthread_cleanup_push, pthread_cleanup_pop):
Revert commit ed225df3ad.
* nptl/Makefile (test-xfail-tst-once5): Define.
the initialization routine to exit by throwing an exception.
Such an execution, termed exceptional, requires call_once to
propagate the exception to its caller. A program may contain
any number of exceptional executions but only one returning
execution (which, if it exists, must be the last execution
with the same once flag).
On POSIX systems such as Linux, std::call_once is implemented
in terms of pthread_once. However, as discussed in libstdc++
bug 66146 - "call_once not C++11-compliant on ppc64le," GLIBC's
pthread_once hangs when the initialization function exits by
throwing an exception on at least arm and ppc64 (though
apparently not on x86_64). This effectively prevents call_once
from conforming to the C++ requirements since there doesn't
appear to be a thread-safe way to work around this problem in
libstdc++.
This patch changes pthread_once to handle gracefully init
functions that exit by throwing exceptions. It was successfully
tested on ppc64, ppc64le, and x86_64.
[BZ #18435]
* nptl/Makefile: Add tst-once5.cc.
* nptl/pthreadP.h (pthread_cleanup_push, pthread_cleanup_pop):
Remove macro redefinitions.
* nptl/tst-once5.cc: New test.
In commit 02657da2cf, .interp section
was removed from libpthread.so. This led to an error:
$ /lib64/libpthread.so.0
Native POSIX Threads Library by Ulrich Drepper et al
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Forced unwind support included.
Segmentation fault
(gdb) bt
#0 0x00000000000055a6 in _exit@plt ()
Unfortunately, there is no way to add a regression test for the bug
because .interp specifies the path to dynamic linker of the target
system.
[BZ #18479]
* nptl/pt-interp.c: New file.
* nptl/Makefile (libpthread-routines, libpthread-shared-only-routines):
Add pt-interp.
[$(build-shared) = yes] ($(objpfx)pt-interp.os): Depend on
$(common-objpfx)runtime-linker.h.
This adds wake-ups that would be missing if assuming that for a
non-writer-preferring rwlock, if one thread has acquired a rdlock and
does not release it, another thread will eventually acquire a rdlock too
despite concurrent write lock acquisition attempts. BZ 14958 is about
supporting this assumption. Strictly speaking, this isn't a valid
test case, but nonetheless worth supporting (see comment 7 of BZ 14958).
If we set up a rwlock to prefer writers (and disallow recursive rdlock
acquisitions), then readers will block for writers that are blocked to
acquire the lock (otherwise, readers could constantly enter and exit,
and the writer would never get the lock). However, the existing
implementation did not wake such readers when the writer timed out.
This patch adds the missing wake-up.
There's no similar case for writers being blocked on readers.
This patch removes the socket.S implementation for all ports and replace
it by a C implementation using socketcall. For ports that implement
the syscall directly, there is no change.
The patch idea is to simplify the socket function implementation that
uses the socketcall to be based on C implemetation instead of a pseudo
assembly implementation with arch specific parts. The patch then remove
the assembly implementatation for the ports which uses socketcall
(i386, microblaze, mips, powerpc, sparc, m68k, s390 and sh).
I have cross-build GLIBC for afore-mentioned ports and tested on both
i386 and ppc32 without regressions.
pthread_mutexattr_settype adds PTHREAD_MUTEX_NO_ELISION_NP to kind,
which is an internal flag that pthread_mutexattr_gettype shouldn't
expose, since pthread_mutexattr_settype wouldn't accept it.
This commit fixes semaphore destruction by either using 64b atomic
operations (where available), or by using two separate fields when only
32b atomic operations are available. In the latter case, we keep a
conservative estimate of whether there are any waiting threads in one
bit of the field that counts the number of available tokens, thus
allowing sem_post to atomically both add a token and determine whether
it needs to call futex_wake.
See:
https://sourceware.org/ml/libc-alpha/2014-12/msg00155.html
This patch changes _dl_allocate_tls_init to resize DTV if the current DTV
isn't big enough. Tested on X86-64, x32 and ia32.
[BZ #13862]
* elf/dl-tls.c: Include <atomic.h>.
(oom): Remove #ifdef SHARED/#endif.
(_dl_static_dtv, _dl_initial_dtv): Moved before ...
(_dl_resize_dtv): This. Extracted from _dl_update_slotinfo.
(_dl_allocate_tls_init): Resize DTV if the current DTV isn't
big enough.
(_dl_update_slotinfo): Call _dl_resize_dtv to resize DTV.
* nptl/Makefile (tests): Add tst-stack4.
(modules-names): Add tst-stack4mod.
($(objpfx)tst-stack4): New.
(tst-stack4mod.sos): Likewise.
($(objpfx)tst-stack4.out): Likewise.
($(tst-stack4mod.sos)): Likewise.
(clean): Likewise.
* nptl/tst-stack4.c: New file.
* nptl/tst-stack4mod.c: Likewise.
pthread_atfork is already built in an extra-libs context, which gives
it NOT_IN_libc in its CPPFLAGS. Adding the same definition to CFLAGS
is pointless.
Verified that the code is unchanged on x86_64.
If a call to the set*id functions fails in a multi-threaded program,
the abort introduced in commit 13f7fe35ae
was triggered.
We address by checking that all calls to set*id on all threads give
the same result, and only abort if we see success followed by failure
(or vice versa).
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
glibc's Makeconfig defines some variables such as $(libm) and $(libdl)
for linking with libraries built by glibc, and nptl/Makeconfig
(included by the toplevel Makeconfig) defines others such as
$(shared-thread-library).
In some places glibc's Makefiles use those variables when linking
against the relevant libraries, but in other places they hardcode the
location of the libraries in the build tree. This patch cleans up
various places to use the variables that already exist (in the case of
libm, replacing several duplicate definitions of a $(link-libm)
variable in subdirectory Makefiles). (It's not necessarily exactly
equivalent to what the existing code does - in particular,
$(shared-thread-library) includes libpthread_nonshared, but is
replacing places that just referred to libpthread.so. But I think
that change is desirable on the general principle of linking things as
close as possible to the way in which they would be linked with an
installed library, unless there is a clear reason not to do so.)
To support running tests with an installed copy of glibc without
needing the full build tree from when that copy was built, I think it
will be useful to use such variables more generally and systematically
- every time the rules for building a test refer to some file from the
build tree that's also installed by glibc, use a makefile variable so
that the installed-testing case can point those variables to installed
copies of the files. This patch just deals with straightforward cases
where such variables already exist.
It's quite possible some uses of $(shared-thread-library) should
actually be a new $(thread-library) variable that's set appropriately
in the --disable-shared case, if those uses would in fact work without
shared libraries. I didn't change the status quo that those cases
hardcode use of a shared library whether or not it's actually needed
(but other uses such as $(libm) and $(libdl) would now get the static
library if the shared library isn't built, when some previously
hardcoded use of the shared library - if they actually need shared
libraries, the test itself needs an enable-shared conditional anyway).
Tested x86_64.
* benchtests/Makefile
($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm),
not $(common-objpfx)math/libm.so.
($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on
$(shared-thread-library), not $(common-objpfx)nptl/libpthread.so.
* elf/Makefile ($(objpfx)noload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
($(objpfx)tst-audit8): Depend on $(libm), not
$(common-objpfx)math/libm.so.
* malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl),
not $(common-objpfx)dlfcn/libdl.so.
* math/Makefile
($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))):
Depend on $(libm), not $(objpfx)libm.so. Do not condition on
[$(build-shared) = yes].
($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not
$(common-objpfx)nptl/libpthread.so.
* misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not
$(common-objpfx)math/libm.so$(libm.so-version) or
$(common-objpfx)math/libm.a depending on [$(build-shared) = yes].
* nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not
$(common-objpfx)dlfcn/libdl.so.
* setjmp/Makefile (link-libm): Remove variable.
($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm).
* stdio-common/Makefile (link-libm): Remove variable.
($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm).
* stdlib/Makefile (link-libm): Remove variable.
($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm).
($(objpfx)tst-strtod-round): Likewise.
($(objpfx)tst-tininess): Likewise.
($(objpfx)tst-strtod-underflow): Likewise.
($(objpfx)tst-strtod6): Likewise.
($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and
$(libdl), not $(common-objpfx)nptl/libpthread.so and
$(common-objpfx)dlfcn/libdl.so.
At this point, we can only abort the process because we have already
switched credentials on other threads. Returning an error would still
leave the process in an inconsistent state.
The new xtest needs root privileges to run.
This patch systematically renames miscellaneous tests so their outputs
use a *.out name (unless the test is just running some glibc program
with its conventional output file name, rather than a special program
at all, as in catgets tests generating *.cat). In the case of the
iconv test test-iconvconfig, output is redirected where it wasn't
before.
In various places the "generated" variable is updated to reflect the
revised test names; in iconvdata/Makefile a typo (mmtrace-tst-loading)
is also fixed. resolv/Makefile sets both "generate" (which appears
unused) and "generated". Bitrot in the settings of these variables
could no doubt be fixed so that "make clean" after build and testing
leaves results the same as after configure (and indeed the
tests-special / xtests-special variables could be used to simplify
things, by removing those files automatically rather than listing them
manually in these variables), and "make distclean" leaves an empty
build directory, but right now it appears various files don't get
deleted. I think they are liable to continue to bitrot in the absence
of routine testing that these targets actually work, given that
building in the source directory isn't supported and that was the main
use of such makefile targets.
Tested x86_64.
* elf/Makefile (tests-special): Rename tests to end with .out.
($(objpfx)noload-mem): Likewise.
($(objpfx)tst-leaks1-mem): Likewise.
($(objpfx)tst-leaks1-static-mem.out): Likewise.
* iconv/Makefile (xtests-special): Change test-iconvconfig to
$(objpfx)test-iconvconfig.out.
(test-iconvconfig): Change to $(objpfx)test-iconvconfig.out. Use
set -e inside subshell and redirect output to file.
* iconvdata/Makefile (generated): Rename tests to end with .out.
Correct type.
(tests-special): Rename tests to end with .out.
($(objpfx)mtrace-tst-loading): Likewise.
* intl/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)mtrace-tst-gettext): Likewise.
* misc/Makefile (generated): Likewise.
(tests-special): Likewise.
($(objpfx)tst-error1-mem): Likewise.
* nptl/Makefile (tests-special): Likewise.
($(objpfx)tst-stack3-mem): Likewise.
(generated): Likewise.
* posix/Makefile (generated): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
($(objpfx)tst-fnmatch-mem): Likewise.
($(objpfx)bug-regex2-mem): Likewise.
($(objpfx)bug-regex14-mem): Likewise.
($(objpfx)bug-regex21-mem): Likewise.
($(objpfx)bug-regex31-mem): Likewise.
($(objpfx)tst-vfork3-mem): Likewise.
($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
($(objpfx)tst-pcre-mem): Likewise.
($(objpfx)tst-boost-mem): Likewise.
($(objpfx)bug-ga2-mem): Likewise.
($(objpfx)bug-glob2-mem): Likewise.
* resolv/Makefile (generate): Likewise.
(tests-special): Likewise.
(xtests-special): Likewise.
(generated): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
($(objpfx)mtrace-tst-leaks2): Likewise.
localedata:
* Makefile (generated): Rename tests to end with .out.
(tests-special): Likewise.
($(objpfx)mtrace-tst-leaks): Likewise.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
This patch splits makefile rules that generate a file then run cmp to
check the contents of that file into separate rules to generate and
compare the file. This simplifies making those tests generate PASS /
FAIL results, by removing the need to insert && between commands in
the test so that a $(evaluate-test) call is reached. It also avoids
the oddity of the .out file being an intermediate file rather than the
final result generated, as noted for some of these tests in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00894.html>.
In many cases, the rule to run the program was no longer needed
because the default rules for running test programs on the host to
generate a .out file sufficed. (I'm not asserting the commands run
after this patch are *exactly* the same as before, simply that the
rules did nothing special that appeared deliberate or relevant to
anything about what the tests were testing. In cases where the rules
redirected stderr as well as stdout, I left the existing rule's
redirection in place to avoid changing what gets compared with the
expected results.)
It's clear there is a lot in common between the various -cmp.out rules
and it might be possible in future to refactor them into more generic
support for the case of comparing test output against a baseline.
(Some baselines are *.exp, some *.expect, some directly embedded in
the makefiles, and nptl/tst-cleanupx0.expect appears unused.)
Tested x86_64.
* elf/Makefile ($(objpfx)order.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order-cmp.out.
($(objpfx)order-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-array1-cmp.out, $(objpfx)tst-array1-static-cmp.out,
$(objpfx)tst-array2-cmp.out, $(objpfx)tst-array3-cmp.out,
$(objpfx)tst-array4-cmp.out, $(objpfx)tst-array5-cmp.out and
$(objpfx)tst-array5-static-cmp.out.
($(objpfx)tst-array1.out): Remove rule.
($(objpfx)tst-array1-cmp.out): New rule.
($(objpfx)tst-array1-static.out): Remove rule.
($(objpfx)tst-array1-static-cmp.out): New rule.
($(objpfx)tst-array2.out): Remove rule.
($(objpfx)tst-array2-cmp.out): New rule.
($(objpfx)tst-array3.out): Remove rule.
($(objpfx)tst-array3-cmp.out): New rule.
($(objpfx)tst-array4.out): Remove rule.
($(objpfx)tst-array4-cmp.out): New rule.
($(objpfx)tst-array5.out): Remove rule.
($(objpfx)tst-array5-cmp.out): New rule.
($(objpfx)tst-array5-static.out): Remove rule.
($(objpfx)tst-array5-static-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order2-cmp.out.
($(objpfx)order2.out): Remove rule.
($(objpfx)order2-cmp.out): New rule.
($(objpfx)tst-initorder.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder-cmp.out.
($(objpfx)tst-initorder-cmp.out): New rule.
($(objpfx)tst-initorder2.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder2-cmp.out.
($(objpfx)tst-initorder2-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-unused-dep-cmp.out.
($(objpfx)tst-unused-dep-cmp.out): Do not run cmp.
($(objpfx)tst-unused-dep-cmp.out): New rule.
* stdio-common/Makefile [$(run-built-tests) = yes] (tests): Depend
on $(objpfx)tst-setvbuf1-cmp.out.
($(objpfx)tst-setvbuf1.out): Do not run cmp.
($(objpfx)tst-setvbuf1-cmp.out): New rule.
* string/Makefile [$(run-built-tests) = yes] (tests): Depend
$(objpfx)tst-svc-cmp.out instead of $(objpfx)tst-svc.out.
($(objpfx)tst-svc.out): Remove rule.
($(objpfx)tst-svc-cmp.out): New rule.
nptl:
* Makefile ($(objpfx)tst-cleanup0.out): Do not run cmp.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-cleanup0-cmp.out.
($(objpfx)tst-cleanup0-cmp.out): New rule.
This patch introduces two new convenience functions to set the default
thread attributes used for creating threads. This allows a programmer
to set the default thread attributes just once in a process and then
run pthread_create without additional attributes.
Resolves BZ #15618.
pthread_attr_getaffinity_np may write beyond bounds of the input
cpuset buffer if the size of the input buffer is smaller than the
buffer present in the input pthread attributes. Fix is to copy to the
extent of the minimum of the source and the destination.
This reverts the change that allows the POSIX Thread default stack size
to be changed by the environment variable
GLIBC_PTHREAD_DEFAULT_STACKSIZE. It has been requested that more
discussion happen before this change goes into 2.18.
[BZ #14652]
When a thread waiting in pthread_cond_wait with a PI mutex is
cancelled after it has returned successfully from the futex syscall
but just before async cancellation is disabled, it enters its
cancellation handler with the mutex held and simply calling a
mutex_lock again will result in a deadlock. Hence, it is necessary to
see if the thread owns the lock and try to lock it only if it doesn't.
[BZ #14417]
A futex call with FUTEX_WAIT_REQUEUE_PI returns with the mutex locked
on success. If such a successful thread is pipped to the cond_lock by
another spuriously woken waiter, it could be sent back to wait on the
futex with the mutex lock held, thus causing a deadlock. So it is
necessary that the thread relinquishes the mutex before going back to
sleep.
[BZ #14477]
Add an additional entry in the exception table to jump to
__condvar_w_cleanup2 instead of __condvar_w_cleanup for PI mutexes
when %ebx contains the address of the futex instead of the condition
variable.
When rlimit is small enough to be used as the stacksize to be returned
in pthread_getattr_np, cases where a stack is made executable due to a
DSO load get stack size that is larger than what the kernel
allows. This is because in such a case the stack size does not account
for the pages that have auxv and program arguments.
Additionally, the stacksize for the process derived from this should
be truncated to align to page size to avoid going beyond rlimit.
There is nothing in the POSIX specification to disallow a
single-threaded program from cancelling itself, so we forcibly enable
multiple_threads to allow the next available cancellation point in the
thread to run.
Also added additional tests to cover various cancellation scenarios.
At least the Linux kernel provides field where the kernel originally
stores the command which is executed by the thread. The value can
subsequently be overwritten. The added functions allow to do that for
threads, providing and abstraction around the syscalls or /proc file
system accesses needed.
The kernel from 2.3.31 on supports the rt_tgsigqueueinfo syscall.
Use it to implement the non-standard extension which, like
sigqueue, can pass additional data to the receiving thread.
* sem_init.c (__new_sem_init): Rewrite to initialize all three
fields in the structure.
(__old_sem_init): New function.
* sem_open.c: Initialize all fields of the structure.
* sem_getvalue.c: Adjust for renamed element.
* sysdeps/unix/sysv/linux/Makefile [subdir=nptl]
(gen-as-const-headers): Add structsem.sym.
* sysdeps/unix/sysv/linux/structsem.sym: New file.
* sysdeps/unix/sysv/linux/internaltypes.h: Rename struct sem to
struct new_sem. Add struct old_sem.
* sysdeps/unix/sysv/linux/sem_post.c: Wake only when there are waiters.
* sysdeps/unix/sysv/linux/i386/i486/sem_post.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sem_post.S: Likewise.
* sysdeps/unix/sysv/linux/sem_wait.c: Indicate that there are waiters.
* sysdeps/unix/sysv/linux/i386/i486/sem_wait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sem_wait.S: Likewise.
* sysdeps/unix/sysv/linux/sem_timedwait.c: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/sem_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S: Likewise.
* Makefile (tests): Add tst-sem10, tst-sem11, tst-sem12.
* tst-sem10.c: New file.
* tst-sem11.c: New file.
* tst-sem12.c: New file.
* tst-typesizes.c: Test struct new_sem and struct old_sem instead
of struct sem.
2007-05-25 Ulrich Drepper <drepper@redhat.com>
* pthread_mutex_lock.c: Preserve FUTEX_WAITERS bit when dead owner
is detected.
* pthread_mutex_timedlock.c: Likewise.
* pthread_mutex_trylock.c: Likewise.
Patch in part by Atsushi Nemoto <anemo@mba.ocn.ne.jp>.
* Makefile (tests): Add tst-robust9 and tst-robustpi9.
* tst-robust9.c: New file.
* tst-robustpi9.c: New file.
2006-08-12 Ulrich Drepper <drepper@redhat.com>
[BZ #2843]
* pthread_join.c (pthread_join): Account for self being canceled
when checking for deadlocks.
* tst-join5.c: Cleanups. Allow to be used in tst-join6.
(tf1): Don't print anything after pthread_join returns, this would be
another cancellation point.
(tf2): Likewise.
* tst-join6.c: New file.
* Makefile (tests): Add tst-join6.
($(all-subdirs-targets)): Use it in place of -C option.
* Rules: Use $(..) instead of ../ if it's already defined.
* Makeconfig (subdir-srcdirs): New variable.
* csu/Makefile (all-Banner-files): Use it.
* configure.in (--enable-add-ons): Set to "yes" by default.
Handle absolute add-on directory names when looking for configure
fragments. Also look for sysdeps/*/preconfigure fragments in add-ons.
Require add-on configure to set $libc_add_on_canonical, use
that in $add_ons_sfx. Substitute add_on_subdirs with computed list
of subdir names each add-on configure set in libc_add_on_subdirs.
* configure: Regenerated.
* Makefile (%/preconfigure: %/preconfigure.in): New pattern rule.
* config.make.in (add-on-subdirs): New substituted variable.
* Makeconfig (all-subdirs): Include $(add-on-subdirs).
Remove $(add-ons), $(sysdep-subdirs).
Don't filter out $(sysdep-inhibit-subdirs).
($(common-objpfx)sysd-dirs): Target removed. Don't include it.
($(common-objpfx)sysd-sorted): Rewritten to feed Depend and Subdirs
files together to gen-sorted.awk, and $(subdirs) via -v.
(subdirs): Remove magic reordering for mach and hurd.
* scripts/gen-sorted.awk: Use subdirs from command line.
Process Subdirs and Depend files directly.
Let Subdirs files use "first dir" and "inhibit dir".
Always move elf to the end of the list.
* hurd/Depend: New file.
* sysdeps/mach/Subdirs: Use "first mach".
* Makefile (dist-separate): Remove linuxthreads.
(dist-separate-linuxthreads): Variable removed.
(glibc-%.tar rule): Use $(sysdeps-add-ons).
* Makerules ($(common-objpfx)Versions.v.i): Use $(subdirs),
not $(all-subdirs).
(sysdep-makefiles): Use $(sysdirs).
(sysdirs): Remove export.
($(+sysdir_pfx)sysd-rules): Handle absolute directory names in
$(config-sysdirs).
(+sysdir_pfx): Variable removed.
(sysd-rules): Use $(common-objpfx) in place of it.
(sysdirs): Variable moved to ...
* Makeconfig (sysdirs): ... here.
Handle absolute directory names in $(config-sysdirs).
(full_config_sysdirs): Variable removed.
* csu/Makefile: Use $(sysdirs) in vpath directive.
* math/Makefile (ulps-file): Use $(sysdirs).
* sysdeps/gnu/Makefile (errlist-c): Likewise.
($(objpfx)errlist-compat.c): Likewise.
* Makeconfig (all-Subdirs-files): Likewise.
($(common-objpfx)config.status): Likewise.
* configure.in (sysnames): Handle absolute add-on directory names.
(sysdeps_add_ons): New variable, AC_SUBST it.
Compute which add-ons contributed sysdeps directories.
* configure: Regenerated.
* config.make.in (sysdeps-add-ons): New substituted variable.
* Makerules (+sysdep_dirs, +sysdep-includes): Variables moved ...
* Makeconfig: ... to here.
(+sysdep_dirs): Append $(sysdeps-add-ons) here.
(+includes): Remove $(objpfx) include, already in $(+sysdep_dirs).
Remove $(includes).
(sysdep-makeconfigs): Use $(+sysdep_dirs).
($(common-objpfx)shlib-versions.v.i): Likewise.
* Makeconfig: Remove hair to set Makeconfig-add-on.
* sysdeps/unix/Makefile (sysdirs): Remove export.
(asm_CPP): Variable removed.
($(common-objpfx)sysd-syscalls): Pass them directly for the script.
* sysdeps/posix/Makefile: New file.
* Makerules (L_tmpnam, TMP_MAX, L_ctermid, L_cuserid): Set non-posix
values here with ?=.
* stdlib/gen-mpn-copy: File removed.
* stdlib/Makefile (distribute): Remove it.
* configure.in: Don't grok --with-gmp.
* configure: Regenerated.
* configure.in (libc_cv_idn): Don't check it; libidn/configure does it.
* configure: Regenerated.
* bare: Directory removed, saved in ports repository.
__openat64_not_cancel): Remove prototypes.
(__openat_nocancel, __openat64_nocancel): New prototypes or defines.
(openat_not_cancel, openat_not_cancel_3, openat64_not_cancel,
openat64_not_cancel_3): Use them.
* tst-initializers1-c99.c: New file.
* tst-initializers1-gnu89.c: New file.
* tst-initializers1-gnu99.c: New file.
* Makefile (tests): Add them.
(CFLAGS-tst-initializers1-c89.c): New variable.
(CFLAGS-tst-initializers1-c99.c): New variable.
(CFLAGS-tst-initializers1-gnu89.c): New variable.
(CFLAGS-tst-initializers1-gnu99.c): New variable.
are not understood by the C++ compiler.
* Makerules: Add rules to build C++ code for test cases.
* include/stdlib.h: Protect for inclusion in C++ code.
* include/time.h: Likewise.
* test-skeleton.c (timeout_handler): Rewrite ts initialization for
C++ compatibility.
PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP,
PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP,
PTHREAD_MUTEX_ADAPTIVE_NP, PTHREAD_RWLOCK_INITIALIZER,
PTHREAD_RWLOCK_WRITER_NONRECURSIVE_INITIALIZER_NP,
PTHREAD_COND_INITIALIZER): Supply zeros for all fields
in the structure.
* Makefile (tests): Add tst-initializers1.
(CFLAGS-tst-initializers1.c): Set.
* tst-initializers1.c: New test.
2005-07-11 Jakub Jelinek <jakub@redhat.com>
* configure.in: Add --enable-stackguard-randomization option.
(ENABLE_STACKGUARD_RANDOMIZE): New define.
* config.h.in (ENABLE_STACKGUARD_RANDOMIZE): Add.
* sysdeps/unix/sysv/linux/dl-osinfo.h: Include stdint.h.
(_dl_setup_stack_chk_guard): New inline function.
* sysdeps/generic/dl-osinfo.h: Include stdint.h.
(_dl_setup_stack_chk_guard): New inline function.
* elf/rtld.c (__stack_chk_guard): New variable.
(dl_main): Remove all traces of TLS_INIT_TP_EXPENSIVE.
Set __stack_chk_guard to _dl_setup_stack_chk_guard (),
use THREAD_SET_STACK_GUARD if defined.
* elf/Versions (ld): Export __stack_chk_guard@@GLIBC_2.4.
* sysdeps/generic/libc-start.c (__stack_chk_guard): New variable.
(__libc_start_main): Set __stack_chk_guard to
_dl_setup_stack_chk_guard (), use THREAD_SET_STACK_GUARD if defined.
* sysdeps/generic/libc-tls.c (__libc_setup_tls): Remove all
traces of TLS_INIT_TP_EXPENSIVE.
* debug/Versions (libc): Export __stack_chk_fail@@GLIBC_2.4.
* debug/Makefile (routines): Add stack_chk_fail.
(static-only-routines): Add stack_chk_fail_local.
* debug/stack_chk_fail_local.c: New file.
* debug/stack_chk_fail.c: New file.
* elf/Makefile: Add rules to build and run tst-stackguard1{,-static}
tests.
* elf/tst-stackguard1.c: New file.
* elf/tst-stackguard1-static.c: New file.
* elf/stackguard-macros.h: New file.
2004-12-07 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/ia64/clone2.S (__clone2): Add support for
NPTL where the PID is stored at userlevel and needs to be reset when
CLONE_THREAD is not used. Restore gp before calling _exit.
2004-12-04 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/clone.S: Add support for NPTL where
the PID is stored at userlevel and needs to be reset when CLONE_THREAD
is not used.
* sysdeps/unix/sysv/linux/86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S: Update uses of RETINSTR.
* sysdeps/unix/sysv/linux/arm/mmap.S: Likewise.
* sysdeps/unix/sysv/linux/arm/mmap64.S: Likewise.
* sysdeps/unix/sysv/linux/arm/socket.S: Likewise.
* sysdeps/unix/sysv/linux/arm/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
$(lib)-static-only-routines is nonempty.
(extra-objs, o-iterator.mk rule): Filter out .oS from generators.
Add a special rule for .oS objects -> _nonshared.a library.
2004-11-20 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/bits/socket.h (SCM_RIGHTS): Avoid
comma at the end of enum if __USE_BSD is not defined.
(calc_inveclosure, calc_eclosure): Skip OP_DELETED_SUBEXP nodes.
* Banner: NPTL no longer has its own version number.
* Makefile (nptl-version): Variable removed.
* sysdeps/pthread/Makefile (CFLAGS-confstr.c): Set LIBPTHREAD_VERSION
using $(version), the glibc version number.
2004-06-17 Ulrich Drepper <drepper@redhat.com>
* sysdeps/pthread/pthread_cond_timedwait.c
(__pthread_cond_timedwait): Also check for negativ nanoseconds.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S
(__pthread_cond_timedwait): Check for invalid nanosecond in
timeout value.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise.
* tst-cond19.c: New file.
* Makefile: Add rules to build and run tst-cond19.
Update.
2004-05-18 Petter Reinholdtsen <pere@hungry.com>
* locales/sl_SI [LC_TIME]: Correct d_fmt date format from
'22.06.2003' to '22. 06. 2003'. Change requested from Aleks
Reinhardt, and approved by the locale author Borka
Jerman-Blazic. [BZ #163]
2004-03-30 H.J. Lu <hongjiu.lu@intel.com>
* Makeconfig (link-libc-static): Use $(static-gnulib) instead
of $(gnulib).
(libgcc_eh): New variable.
(gnulib): Use it variable.
(static-gnulib): New variable.
* Makerules (LDLIBS-c.so): Use $(static-gnulib) instead of $(gnulib).
* config.make.in (have-as-needed): New variable.
* configure.in: Check if linker supports --as-needed.
* Makefile (tests-nolibpthread): Add tst-unload. Don't link with
libpthread for the files in this list.
(CFLAGS-tst-unload): Removed.
* tst-unload.c (do_test): Don't use complete path for
LIBPHREAD_SO.
* sysdeps/unix/sysv/linux/i386/i486/pthread_barrier_wait.S
(pthread_barrier_wait): After wakeup, release lock only when the
last thread stopped using the barrier object.
* sysdeps/unix/sysv/linux/x86_64/pthread_barrier_wait.S
(pthread_barrier_wait): Likewise.
* sysdeps/pthread/pthread_barrier_wait.c (pthread_barrier_wait):
Likewise.
* Makefile (tests): Add tst-barrier4.
* tst-barrier4.c: New file.
2004-01-29 Steven Munroe <sjmunroe@us.ibm.com>
* Makefile (libpthread-routines): Add pt-cleanup.
* pt-longjmp.c: Removed.
* pt-cleanup.c: Copied __pthread_cleanup_upto to here. New file.
* sysdeps/generic/pt-longjmp.c: Copied longjmp to here. New file.
* sysdeps/unix/sysv/linux/powerpc/Versions: New file.
Version longjmp, siglongjmp for GLIBC_2.3.4.
* sysdeps/unix/sysv/linux/powerpc/pt-longjmp.c: New File.
2004-01-08 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/x86_64/clone.S (__clone): Add cfi_endproc
right before syscall and cfi_startproc before PSEUDO_END.
Clear %rbp in thread_start.
2003-12-23 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/raise.c (raise): Protect pid = selftid
setting with __ASSUME_TGKILL || defined __NR_tgkill.
If pid is 0, set it to selftid.
* sysdeps/unix/sysv/linux/getpid.c (really_getpid): Make inline.
Don't set self->pid but self->tid. If self->pid == 0 and self->tid
!= 0, return self->tid without doing a syscall.
* descr.h (struct pthread): Move pid field after tid.
* Makefile (tests): Add tst-raise1.
* tst-raise1.c: New file.
* Makefile (tests): Add it.
(tst-oddstacklimit-ENV): New variable.
* init.c (__pthread_initialize_minimal_internal): Round stack rlimit
value up to page size for __default_stacksize.
2003-12-17 Jakub Jelinek <jakub@redhat.com>
* malloc/mtrace.c (tr_old_memalign_hook): New variable.
(tr_memalignhook): New function.
(mtrace): Register tr_memalignhook.
(muntrace): Deregister tr_memalignhook.
* malloc/malloc.c (__posix_memalign): If __memalign_hook != NULL,
call it directly instead of memalign_internal.
2003-12-17 Ulrich Drepper <drepper@redhat.com>
* misc/mntent_r.c: Change encoding to match recently change decoder.
Patch by Alexander Achenbach <xela@slit.de>.
2003-12-16 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Correct definition of
vrregset_t.
2003-12-16 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/unix/sysv/linux/powerpc/sys/procfs.h [!__PPC64_ELF_H]: Extent
conditional to include typedef elf_vrreg_t.
2002-12-17 Paolo Bonzini <bonzini@gnu.org>
* posix/regexec.c (re_search_internal): Limit search to the
beginning of the buffer if the initial states are empty for
contexts that do not include CONTEXT_BEGBUF or, if
!preg->newline_anchor, that do not include any one of
CONTEXT_BEGBUF and CONTEXT_NEWLINE.
2003-12-02 David Mosberger <davidm@hpl.hp.com>
* sysdeps/ia64/elf/initfini.c: Add unwind info.
* sysdeps/ia64/dl-machine.h (elf_machine_matches_host): Mark with
attribute "unused".
(elf_machine_dynamic): Mark with attributes "unused" and "const".
(elf_machine_runtime_setup): Likewise.
* sysdeps/generic/dl-fptr.c (make_fptr_table): Mark with
attribute "always_inline".
* sysdeps/ia64/dl-machine.h (__ia64_init_bootstrap_fdesc_table):
Likewise.
* configure.in: Check whether compiler has libunwind support.
* config.make.in (have-cc-with-libunwind): New variable.
* config.h.in (HAVE_CC_WITH_LIBUNWIND): New macro.
* Makeconfig (gnulib): If have-cc-withh-libunwind is "yes", also
mention -lunwind.
003-11-12 David Mosberger <davidm@hpl.hp.com>
* sysdeps/unix/sysv/linux/ia64/sysdep.h: Define DO_CALL_VIA_BREAK.
Redefine DO_CALL to use vdso if supported, otherwise DO_CALL_VIA_BREAK.
Likewise for DO_INLINE_SYSCALL. Make INTERNAL_SYSCALL use
DO_INLINE_SYSCALL.
* sysdeps/unix/sysv/linux/ia64/vfork.S: Use DO_CALL_VIA_BREAK()
instead of DO_CALL().
* sysdeps/unix/sysv/linux/ia64/clone2.S: Use break directly instead
of DO_CALL().
* sysdeps/unix/sysv/linux/ia64/brk.S (__curbrk): Restructure it
to take advantage of DO_CALL() macro.
* sysdeps/unix/sysv/linux/ia64/setcontext.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/getcontext.S: Likewise.
* elf/rtld.c (dl_main): Restrict dl_sysinfo_dso check to first
program header. On ia64, the check failed previously because
there are two program headers.
* sysdeps/generic/s_nexttowardf.c: Likewise.
* math/bug-nexttoward.c: New file.
2003-11-21 Jakub Jelinek <jakub@redhat.com>
* posix/tst-rxspencer.c (mb_tests): Don't run identical multi-byte
tests multiple times unnecessarily.
2003-11-21 Jakub Jelinek <jakub@redhat.com>
* posix/bug-regex19.c (BRE, ERE): Define.
(tests): Add many new tests, remove UTF-8 ones.
(do_one_test, do_mb_tests): New functions.
(main): Rewritten using do_one_test and do_mb_tests.
2003-09-17 Philip Blundell <philb@gnu.org>
* sysdeps/unix/sysv/linux/arm/vfork.S: Branch to fork if
libpthread is loaded. Elide backwards compatibility code when not
required.
2003-09-15 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/Makefile (sysdep-CFLAGS): If not in math or csu
subdir, add -mpreferred-stack-boundary=4, with few exceptions.
2003-09-17 Jakub Jelinek <jakub@redhat.com>
* Makeconfig (stack-align-test-flags): Set.
* stdlib/Makefile (CFLAGS-tst-bsearch.c): Add
$(stack-align-test-flags).
* stdlib/tst-bsearch.c: Include tst-stack-align.h.
(align_check): New var.
(comp): Use TEST_STACK_ALIGN macro.
(do_test): Fail if align_check != 1.
* sysdeps/generic/tst-stack-align.h: New file.
* sysdeps/i386/i686/Makefile (stack-align-test-flags): Add -msse.
* sysdeps/i386/i686/tst-stack-align.h: New file.
* sysdeps/pthread/createthread.c (do_clone): If __ASSUME_CLONE_STOPPED
is not defined, do explicit synchronization.
(create_thread): Do not lock pd->lock here. If __ASSUME_CLONE_STOPPED
is not defined also unlock pd->lock for non-debugging case in case
it is necessary.
* pthread_create.c (start_thread): Always get and release pd->lock
if __ASSUME_CLONE_STOPPED is not defined.
(start_thread_debug): Removed. Adjust users.
* allocatestack.c (allocate_stack): Always initialize lock if
__ASSUME_CLONE_STOPPED is not defined.
* Makefile (tests): Add tst-sched1.
* tst-sched1.c: New file.
2003-07-22 Jakub Jelinek <jakub@redhat.com>
* include/resolv.h (__resp): Declare. Define to __libc_resp
if in libc.so.
(_res): If USE___THREAD, define to (*__resp).
* resolv/res_libc.c (_res): Normal .bss variable with compat_symbol
even if USE___THREAD.
(__resp): New __thread variable.
(__libc_resp): New alias.
* resolv/Versions (libc): Export _res@GLIBC_2.0 even if
USE_TLS && HAVE___THREAD. Export __resp@@GLIBC_PRIVATE.
* sysdeps/generic/res-state.c (__res_state): Return __resp
if USE___THREAD.
2003-07-21 Ulrich Drepper <drepper@redhat.com>
* Makerules (build-module-helper): Add -z defs unless explicitly said
not to do it.
* dlfcn/Makefile: Define various *-no-z-defs variables for test DSOs
which has undefined symbols.
* elf/Makefile: Likewise.
2003-07-20 Ulrich Drepper <drepper@redhat.com>
* Makefile (libpthread-routines): Add pthread_attr_getaffinity and
pthread_attr_setaffinity.
* Versions [libpthread] (GLIBC_2.3.3): Likewise.
* sysdeps/unix/sysv/linux/pthread_attr_getaffinity.c: New file.
* sysdeps/unix/sysv/linux/pthread_attr_setaffinity.c: New file.
* pthread_attr_destroy.c: Free cpuset element if allocated.
* pthread_create.c: Pass iattr as additional parameter to
create_thread.
* sysdeps/pthread/createthread.c: If attribute is provided and
a new thread is created with affinity set or scheduling parameters,
start thread with CLONE_STOPPED.
* sysdeps/pthread/pthread.h: Declare pthread_attr_getaffinity and
pthread_attr_setaffinity.
* sysdeps/unix/sysv/linux/internaltypes.h (struct pthread_attr): Add
cpuset element.
* sysdeps/unix/sysv/linux/sigwait.c: Include string.h.
* sysdeps/unix/sysv/linux/sigwaitinfo.c: Likewise.
* sysdeps/unix/sysv/linux/sigtimedwait.c: Likewise.
* sysdeps/unix/sysv/linux/sleep.c (__sleep): Cast value to unsigned
int before assigning to max to avoid warnings.
2003-07-11 Jakub Jelinek <jakub@redhat.com>
* include/time.h: Define CLOCK_IDFIELD_SIZE.
* sysdeps/posix/clock_getres.c: Recognize thread CPU clock IDs.
* sysdeps/unix/clock_gettime.c: Likewise.
* sysdeps/unix/clock_settime.c: Likewise.
* sysdeps/unix/clock_nanosleep.c (CPUCLOCK_P): Adjust for new
clock id for thread CPU clocks.
* sysdeps/unix/clock_nanosleep.c (clock_nanosleep): nanosleep
takes care of enabling cancellation.
* sysdeps/pthread/aio_suspend.c (aio_suspend): Make aio_suspend
cancelable. It's not correct to disable cancellation. Instead of
a cleanup handler.
2003-06-17 Ulrich Drepper <drepper@redhat.com>
* tst-cancel4.c: Add tests for the socket and signal functions, pause.
Also test early cancellation before the thread reaches the cancellation
point.
* Makefile: Compile forward.c with exceptions.
* sysdeps/unix/sysv/linux/sleep.c: New file.
* Makefile: Add CFLAGS definition to compile function wrappers
duplicated from libc with exceptions.
* tst-cancel4.c: Also check cancellation handlers.
2003-06-16 Ulrich Drepper <drepper@redhat.com>
* elf/rtld.c (dl_main): Use l_map_start not l_addr in Phdr
computation so that prelinking wroks.
* inet/netinet/ip6.h (IP6OPT_PAD1, IP6OPT_PADN): Define.
* Makefile (tests): Add tst-sem8 and tst-sem9.
* tst-sem8.c: New file.
* tst-sem9.c: New file.
* sem_open.c: Fix creation of in_use record if the file exists but
no internal record.
2003-04-11 Ulrich Drepper <drepper@redhat.com>
* sysdeps/generic/libc-start.c: Cleanup MAIN_AUXVEC_ARG handling.
Remove HAVE_CANCELBUF code. Replace with code using the new
initializers for unwind-based cleanup handling.
* sysdeps/generic/unwind.h: Update from latest gcc version.
* sysdeps/unix/sysv/linux/i386/sysdep.h: Define labels in a few
places to allow unwind data generation.
* sysdeps/i386/bits/setjmp.h: Allow file to be included multiple times.
* sysdeps/x86_64/bits/setjmp.h: Likewise.
* sysdeps/sh/bits/setjmp.h: Likewise.
* sysdeps/powerpc/bits/setjmp.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/setjmp.h: Likewise.
* sysdeps/alpha/bits/setjmp.h: Likewise.
* Makefile ($(objpfx)multidir.mk): New target, generated makefile that
sets variable `multidir'; include that.
(generated): Add it.
($(objpfx)$(multidir)/crti.o): New target.
[$(multidir) != .] (generated-dirs, extra-objs, omit-deps): Add it.
2003-04-01 Ulrich Drepper <drepper@redhat.com>
* pthread_create.c (deallocate_tsd): Clear/free memory after the last
round, not the first. Use specific_used flag instead of local
found_nonzero variable. Use THREAD_[SG]ETMEM where possible.
(__free_tcb): Don't call deallocate_tsd here.
(start_thread): Call deallocate_tsd here.
* pthread_setspecific.c: Set specific_used flag really only when
needed.
* Makefile (tests): Add tst-tsd3.c
* tst-tsd3.c: New file.
2003-02-21 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/getuid.c: Use INTERNAL_SYSCALL and do
not chechk for errors (unless testing for 32bit variant).
* sysdeps/unix/sysv/linux/i386/getgid.c: Likewise.
* sysdeps/unix/sysv/linux/i386/geteuid.c: Likewise.
* sysdeps/unix/sysv/linux/i386/getegid.c: Likewise.
2003-02-16 Ulrich Drepper <drepper@redhat.com>
* libc-cancellation.c (__libc_enable_asynccancel): Rwrite to avoid
going into an endless loop.
* Makefile (tests): Add tst-cancel9.
* tst-cancel9.c: New file.
* pthread_cancel.c (pthread_cancel): Use the result of __pthread_kill.
2003-02-15 Ulrich Drepper <drepper@redhat.com>
* pthread_setconcurrency.c (pthread_setconcurrency): Fail for
negative arguments.
* Makefile (tests): Add tst-basic5.
* tst-basic5.c: New file.
after thread is done. If then zero, call exit(0).
2003-02-14 Ulrich Drepper <drepper@redhat.com>
* sysdeps/generic/libc-start.c [HAVE_PTR_NTHREADS]: Decrement thread
counter and only call __exit_thread if this is not the last thread.
* descr.h: Define CANCELING_BIT and CANCELING_BITMASK. Introduce
after CANCELTYPE_BIT, move the other bits up. Update CANCEL_RESTMASK.
* init.c (sigcancel_handler): Also set CANCELING_BITMASK bit in newval.
* pthread_cancel.c (pthread_cancel): Likewise. Also set CANCELING_BIT
if asynchronous canceling is enabled.
* pthread_join.c (pthread_join): When recognizing circular joins,
take into account the other thread might be already canceled.
* Makefile (tests): Add tst-join5.
* tst-join5.c: New file.
* Makefile: Add rules to build and run tst-atfork2 test.
* tst-atfork2.c: New file.
* tst-atfork2mod.c: New file.
* sysdeps/unix/sysv/linux/unregister-atfork.c
(__unregister_atfork): Free the memory allocated for the handlers
after removing them from the lists.
* sysdeps/unix/sysv/linux/register-atfork.c: Define memeory
cleanup function.
* tst-atfork1.c (do_test): Wait for the child we forked.
Report error in child.
* sysdeps/unix/sysv/linux/fork.c (__libc_fork): Fix comment.
2003-01-14 Guido Guenther <agx@sigxcpu.org>
* sysdeps/unix/sysv/linux/mips/sysdep.h (INTERNAL_SYSCALL,
INTERNAL_SYSCALL_DECL, INTERNAL_SYSCALL_ERRNO,
INTERNAL_SYSCALL_ERROR_P, INLINE_SYSCALL): Define.
2003-01-14 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h
(INTERNAL_SYSCALL): Make use of ERR parameter.
(INTERNAL_SYSCALL_DECL, INTERNAL_SYSCALL_ERRNO,
INTERNAL_SYSCALL_ERROR_P): Adjust accordingly.
(INLINE_SYSCALL): Make use of INTERNAL_SYSCALL.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: New file.
Patch by Denis Zaitsev <zzz@cd-club.ru>.
that %eax is modified. Reported by Denis Zaitsev <zzz@cd-club.ru>.
2003-01-02 Ulrich Drepper <drepper@redhat.com>
* sysdeps/pthread/bits/pthreadtypes.h (pthread_cond_t): Add padding.
* condvar.c: Add symbol versioning. The compatibility versions
are the same as the change in the interface does not effect this
implementation.
* Versions [libpthread]: Add definitions for new pthread_cond_*
interfaces for version GLIBC_2.3.2.
2002-12-28 Ulrich Drepper <drepper@redhat.com>
* descr.h (struct pthread): Move header.data.list to the back of the
struct.
* sysdeps/i386/tls.h (tcbhead_t): Move list to the back of the struct.
(MULTIPLE_THREADS_OFFSET): Adjust offset.
(SYSINFO_OFFSEET): Likewise.
2002-12-27 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/i386/i686/dl-sysdep.h (USE_DL_SYSINFO):
Define.
(DL_SYSINFO_DEFAULT): Cast to uintptr_t to avoid warnings.
* sysdeps/unix/sysv/linux/i386/dl-sysdep.h (NEED_DL_SYSINFO,
DL_SYSINFO_DEFAULT, DL_SYSINFO_IMPLEMENTATION): Define.
(USE_DL_SYSINFO): Undef.
2002-12-22 Jakub Jelinek <jakub@redhat.com>
* Makefile (tests-reverse): Use $(objpfx)../libc.so instead of
$(common-objpfx)libc.so.
* tst-cancel4.c (tf_write, tf_writev): Increase buf sizes so that
it is bigger than pipe buffer size even on arches with bigger
page size.
(tf_usleep): Cast usleep argument to useconds_t to avoid warnings.
2002-12-17 Jakub Jelinek <jakub@redhat.com>
* malloc/thread-m.h (mutex_init, mutex_lock, mutex_trylock,
mutex_unlock): If not building NPTL, use __libc_maybe_call2 if
available, otherwise __libc_maybe_call.
* sysdeps/unix/sysv/linux/x86_64/recv.c: Add support for
cancellation handling.
* sysdeps/unix/sysv/linux/x86_64/send.c: Likewise.
2002-12-13 Ulrich Drepper <drepper@redhat.com>
* misc/syslog.c (log_cleanup): Don't use parameter in
__libc_lock_unlock call, use syslog_lock directly. Adjust callers to
pass NULL instead of a pointer to syslog_lock.
2002-12-05 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove
lowlevellock.
* sysdeps/unix/sysv/linux/i386/i486/libc-lowlevellock.S: New file.
* sysdeps/unix/sysv/linux/i386/i586/libc-lowlevellock.S: New file.
* sysdeps/unix/sysv/linux/i386/i686/libc-lowlevellock.S: New file.
* sysdeps/pthread/bits/libc-lock.h: Use lowlevellock implementation
for __libc_lock_* macros.
* Makefile (routines): Add libc-lowlevellock.
2002-10-09 Roland McGrath <roland@redhat.com>
* sysdeps/pthread/bits/libc-lock.h (__libc_maybe_call): New macro.
Under [__PIC__], call the function via the pointer fetched for
comparison rather than a call by name that uses the PLT.
(__libc_lock_init, __libc_rwlock_init, __libc_lock_fini)
(__libc_rwlock_fini, __libc_lock_lock, __libc_rwlock_rdlock)
(__libc_rwlock_wrlock, __libc_lock_trylock, __libc_rwlock_tryrdlock)
(__libc_rwlock_trywrlock, __libc_lock_unlock, __libc_rwlock_unlock)
(__libc_key_create, __libc_getspecific, __libc_setspecific): Use it.
2002-11-26 Ulrich Drepper <drepper@redhat.com>
* allocatestack.c (queue_stack): Don't remove stack from list here.
Do it in the caller. Correct condition to prematurely terminate
loop to free stacks.
(__deallocate_stack): Remove stack from list here.
2002-11-26 Ulrich Drepper <drepper@redhat.com>
* Makefile (tests): Add tst-stack1.
* tst-stack1.c: New file.
* allocatestack.c (allocate_stack): Initialize the TCB on a user
provided stack.
* pthread_attr_getstack.c: Return bottom of the thread area.
2002-11-25 Ulrich Drepper <drepper@redhat.com>
* Makefile (libpthread-routines): Add pt-allocrtsig and
pthread_kill_other_threads.
* pt-allocrtsig.c: New file.
* pthread_kill_other_threads.c: New file.
* sysdeps/unix/sysv/linux/allocrtsig.c: Add additional aliases for
all three functions.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove
allocrtsig.
* sysdeps/unix/sysv/linux/Versions (libc:GLIBC_PRIVATE): Export
__libc_current_sigrtmin_private, __libc_current_sigrtmax_private,
and __libc_allocate_rtsig_private.
* Versions (libpthread): Export pthread_kill_other_threads_np,
__libc_current_sigrtmin, and __libc_current_sigrtmax.
2002-11-24 Ulrich Drepper <drepper@redhat.com>
* allocatestack.c (allocate_stack): stackaddr in attribute points to
the end of the stack. Adjust computations.
When mprotect call fails dequeue stack and free it.
* pthread_attr_setstack.c: Store top of the stack in stackaddr
attribute.
* pthread_getattr_np.c: Likewise.
* descr.h (IS_DETACHED): Add some more parenthesis to prevent
surprises.
2002-11-23 Ulrich Drepper <drepper@redhat.com>
* sysdeps/pthread/pthread.h (pthread_self): __THROW must come before
attribute definitions. Patch by Luca Barbieri <ldb@ldb.ods.org>.
2002-11-22 Ulrich Drepper <drepper@redhat.com>
* pthread_getspecific.c: Optimize access to first 2nd-level array.
* pthread_setspecific.c: Likewise.
2002-11-21 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/createthread.c: Remove CLONE_ flags
definitions. Get them from the official place.
* sysdeps/unix/sysv/linux/i386/fork.c: Likewise.
* sysdeps/unix/sysv/linux/i386/createthread.c: Update CLONE_* flags.
Use new CLONE_ flags in clone() calls.
* sysdeps/unix/sysv/linux/fork.c: Use ARCH_FORK to actually fork.
* sysdeps/unix/sysv/linux/i386/fork.c: New file.
* Versions: Add pthread_* functions for libc.
* forward.c: New file.
* sysdeps/pthread/Makefile (libpthread-sysdeps_routines): Add
errno-loc.
* herrno.c: New file.
* res.c: New file.
* Makefile (libpthread-routines): Remove sem_post, sem_wait,
sem_trywait, and sem_timedwait. Add herrno and res.
* sem_init.c: Don't initialize lock and waiters members.
* sem_open.c: Likewise.
* sem_post.c: Removed.
* sem_wait.c: Removed.
* sem_trywait.c: Removed.
* sem_timedwait.c: Removed.
* sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Complete rewrite.
Includes full implementations of sem_post, sem_wait, sem_trywait,
and sem_timedwait.
* sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Adjust
for new implementation.
* sysdeps/unix/sysv/linux/internaltypes.h (struct sem): Remove lock
and waiters fields.
* tst-sem3.c: Improve error message.
* tst-signal3.c: Likewise.
* init.c (__pthread_initialize_minimal): Use set_tid_address syscall
to tell the kernel about the termination futex and to initialize tid
member. Don't initialize main_thread.
* descr.h (struct pthread): Remove main_thread member.
* cancelllation.c (__do_cancel): Remove code handling main thread.
The main thread is not special anymore.
* allocatestack.c (__reclaim_stacks): Mark stacks as unused. Add
size of the stacks to stack_cache_actsize.
* pt-readv.c: Add missing "defined".
* pt-sigwait.c: Likewise.
* pt-writev.c: Likewise.
2002-11-09 Ulrich Drepper <drepper@redhat.com>
* Versions: Export __connect from libpthread.
Patch by Luca Barbieri <ldb@ldb.ods.org>.
* Makefile (libpthread-routines): Add pt-raise.
* sysdeps/unix/sysv/linux/raise.c: New file.
* sysdeps/unix/sysv/linux/pt-raise.c: New file.
* sysdeps/generic/pt-raise.c: New file.
* pthread_cond_init.c: Initialize all data elements of the condvar
structure. Patch by Luca Barbieri <ldb@ldb.ods.org>.
* pthread_attr_init.c: Actually implement 2.0 compatibility version.
* pthread_create.c: Likewise.
* Makefile (tests): Add tst-key1, tst-key2, tst-key3.
* tst-key1.c: New file.
* tst-key2.c: New file.
* tst-key3.c: New file.
* Versions: Export pthread_detach for version GLIBC_2.0.
Reported by Saurabh Desai <sdesai@austin.ibm.com>.
2002-11-08 Ulrich Drepper <drepper@redhat.com>
* pthread_key_create.c: Terminate search after an unused key was found.
Patch by Luca Barbieri <ldb@ldb.ods.org>.
* sysdeps/unix/sysv/linux/i386/pthread_once.S: Return zero.
Patch by Luca Barbieri <ldb@ldb.ods.org>.
2002-10-10 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/i486/lowlevelsem.S: Use slow generic
dynamic lookup for errno in PIC.
* allocatestack.c (get_cached_stack): Rearrange code slightly to
release the stack lock as soon as possible.
Call _dl_allocate_tls_init for TCB from the cache to re-initialize
the static TLS block.
(allocate_stack): Call _dl_allocate_tls_init for user-provided stack.
* cancellation.c: Renamed from cancelation.c.
* Makefile: Adjust accordingly.
* pthreadP.h (CANCELLATION_P): Renamed from CANCELATION_P.
* cleanup_defer.c: Use CANCELLATION_P.
* pthread_testcancel.c: Likewise.
* descr.h: Fix spelling in comments.
* init.c: Likewise.
* pthread_getattr_np.c: Likewise.
* pthread_getschedparam.c: Likewise.
* pthread_setschedparam.c: Likewise.
* Versions: Likewise.
* pt-pselect.c: New file.
* Makefile (libpthread-routines): Add pt-pselect.
* Versions: Add pselect.
* tst-cancel4.c: New file.
* Makefile (tests): Add tst-cancel4.
2002-10-09 Ulrich Drepper <drepper@redhat.com>
* pthread_mutex_lock.c: Always record lock ownership.
* pthread_mutex_timedlock.c: Likewise.
* pthread_mutex_trylock.c: Likewise.
* pt-readv.c: New file.
* pt-writev.c: New file.
* pt-creat.c: New file.
* pt-msgrcv.c: New file.
* pt-msgsnd.c: New file.
* pt-poll.c: New file.
* pt-select.c: New file.
* pt-sigpause.c: New file.
* pt-sigsuspend.c: New file.
* pt-sigwait.c: New file.
* pt-sigwaitinfo.c: New file.
* pt-waitid.c: New file.
* Makefile (libpthread-routines): Add pt-readv, pt-writev, pt-creat,
pt-msgrcv, pt-msgsnd, pt-poll, pt-select, pt-sigpause, pt-sigsuspend,
pt-sigwait, pt-sigwaitinfo, and pt-waitid.
* Versions: Add all the new functions.
* tst-exit1.c: New file.
* Makefile (tests): Add tst-exit1.
* sem_timedwait.c: Minor optimization for more optimal fastpath.
2002-10-08 Ulrich Drepper <drepper@redhat.com>
* pt-fcntl.c: Only enable asynchronous cancellation for F_SETLKW.
* pthread_join.c: Enable asynchronous cancellation around lll_wait_tid
call. pthread_join is an official cancellation point.
* pthread_timedjoin.c: Likewise.
* pthread_cond_wait.c: Revert order in which internal lock are dropped
and the condvar's mutex are retrieved.
* pthread_cond_timedwait.c: Likewise.
Reported by dice@saros.East.Sun.COM.
2002-10-07 Ulrich Drepper <drepper@redhat.com>
* pthreadP.h: Cut out all type definitions and move them...
* sysdeps/unix/sysv/linux/internaltypes.h: ...here. New file.
* pthreadP.h: Include <internaltypes.h>.
* sysdeps/unix/sysv/linux/i386/lowlevelsem.h (lll_sem_post): Little
performance tweaks.
* sem_trywait.c: Shuffle #includes around to get right order.
* sem_timedwait.c: Likewise.
* sem_post.c: Likewise.
* sem_wait.c: Likewise.
* nptl 0.3 released.
* Makefile (tests): Add tst-signal3.
* tst-signal3.c: New file.
2002-10-05 Ulrich Drepper <drepper@redhat.com>
* sysdeps/unix/sysv/linux/i386/lowlevelsem.h: Tell the compiler that
the asms modify the sem object.
(__lll_sem_timedwait): Now takes struct sem* as first parameter.
* sysdeps/unix/sysv/linux/i386/bits/semaphore.h (sem_t): Don't expose
the actual members.
* pthreadP.h (struct sem): New type. Actual semaphore type.
* semaphoreP.h: Include pthreadP.h.
* sem_getvalue.c: Adjust to sem_t change.
* sem_init.c: Likewise.
* sem_open.c: Likewise.
* sem_post.c: Likewise.
* sem_timedwait.c: Likewise.
* sem_trywait.c: Likewise.
* sem_wait.c: Likewise.
2002-10-04 Ulrich Drepper <drepper@redhat.com>
* Makefile (tests): Add tst-basic2, tst-exec1, tst-exec3, tst-exec3.
* tst-basic2.c: New file.
* tst-exec1.c: New file.
* tst-exec2.c: New file.
* tst-exec3.c: New file.
* tst-fork1.c: Remove extra */.
* nptl 0.2 released. The API for IA-32 is complete.
