The ldbl-128ibm implementations of ceill and floorl call the
corresponding double functions. This patch fixes those
implementations to call those functions as ceil and floor rather than
as __ceil and __floor, so that the proper inlining takes place when
possible, while including local asm redirections for when the
functions are not inlined since NO_MATH_REDIRECT applies to the double
functions as well as to the long double ones.
Tested with build-many-glibcs.py for all its powerpc configurations.
* sysdeps/ieee754/ldbl-128ibm/s_ceill.c (ceil): Redirect to
__ceil.
(__ceill): Call ceil instead of __ceil.
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c (floor): Redirect to
__floor.
(__floorl): Call floor instead of __floor.
Similar to the changes that were made to call sqrt functions directly
in glibc, instead of __ieee754_sqrt variants, so that the compiler
could inline them automatically without needing special inline
definitions in lots of math_private.h headers, this patch makes libm
code call floor functions directly instead of __floor variants,
removing the inlines / macros for x86_64 (SSE4.1) and powerpc
(POWER5).
The redirection used to ensure that __ieee754_sqrt does still get
called when the compiler doesn't inline a built-in function expansion
is refactored so it can be applied to other functions; the refactoring
is arranged so it's not limited to unary functions either (it would be
reasonable to use this mechanism for copysign - removing the inline in
math_private_calls.h but also eliminating unnecessary local PLT entry
use in the cases (powerpc soft-float and e500v1, for IBM long double)
where copysign calls don't get inlined).
The point of this change is that more architectures can get floor
calls inlined where they weren't previously (AArch64, for example),
without needing special inline definitions in their math_private.h,
and existing such definitions in math_private.h headers can be
removed.
Note that it's possible that in some cases an inline may be used where
an IFUNC call was previously used - this is the case on x86_64, for
example. I think the direct calls to floor are still appropriate; if
there's any significant performance cost from inline SSE2 floor
instead of an IFUNC call ending up with SSE4.1 floor, that indicates
that either the function should be doing something else that's faster
than using floor at all, or it should itself have IFUNC variants, or
that the compiler choice of inlining for generic tuning should change
to allow for the possibility that, by not inlining, an SSE4.1 IFUNC
might be called at runtime - but not that glibc should avoid calling
floor internally. (After all, all the same considerations would apply
to any user program calling floor, where it might either be inlined or
left as an out-of-line call allowing for a possible IFUNC.)
Tested for x86_64, and with build-many-glibcs.py.
* include/math.h [!_ISOMAC && !(__FINITE_MATH_ONLY__ &&
__FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (MATH_REDIRECT):
New macro.
[!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0)
&& !NO_MATH_REDIRECT] (MATH_REDIRECT_LDBL): Likewise.
[!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0)
&& !NO_MATH_REDIRECT] (MATH_REDIRECT_F128): Likewise.
[!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0)
&& !NO_MATH_REDIRECT] (MATH_REDIRECT_UNARY_ARGS): Likewise.
[!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0)
&& !NO_MATH_REDIRECT] (sqrt): Redirect using MATH_REDIRECT.
[!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0)
&& !NO_MATH_REDIRECT] (floor): Likewise.
* sysdeps/aarch64/fpu/s_floor.c: Define NO_MATH_REDIRECT before
header inclusion.
* sysdeps/aarch64/fpu/s_floorf.c: Likewise.
* sysdeps/ieee754/dbl-64/s_floor.c: Likewise.
* sysdeps/ieee754/dbl-64/wordsize-64/s_floor.c: Likewise.
* sysdeps/ieee754/float128/s_floorf128.c: Likewise.
* sysdeps/ieee754/flt-32/s_floorf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_floorl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_floor_template.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floor.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf.c: Likewise.
* sysdeps/riscv/rv64/rvd/s_floor.c: Likewise.
* sysdeps/riscv/rvf/s_floorf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_floor.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_floorf.c: Likewise.
* sysdeps/powerpc/fpu/math_private.h [_ARCH_PWR5X] (__floor):
Remove macro.
[_ARCH_PWR5X] (__floorf): Likewise.
* sysdeps/x86_64/fpu/math_private.h [__SSE4_1__] (__floor): Remove
inline function.
[__SSE4_1__] (__floorf): Likewise.
* math/w_lgamma_main.c (LGFUNC (__lgamma)): Use floor functions
instead of __floor variants.
* math/w_lgamma_r_compat.c (__lgamma_r): Likewise.
* math/w_lgammaf_main.c (LGFUNC (__lgammaf)): Likewise.
* math/w_lgammaf_r_compat.c (__lgammaf_r): Likewise.
* math/w_lgammal_main.c (LGFUNC (__lgammal)): Likewise.
* math/w_lgammal_r_compat.c (__lgammal_r): Likewise.
* math/w_tgamma_compat.c (__tgamma): Likewise.
* math/w_tgamma_template.c (M_DECL_FUNC (__tgamma)): Likewise.
* math/w_tgammaf_compat.c (__tgammaf): Likewise.
* math/w_tgammal_compat.c (__tgammal): Likewise.
* sysdeps/ieee754/dbl-64/e_lgamma_r.c (sin_pi): Likewise.
* sysdeps/ieee754/dbl-64/k_rem_pio2.c (__kernel_rem_pio2):
Likewise.
* sysdeps/ieee754/dbl-64/lgamma_neg.c (__lgamma_neg): Likewise.
* sysdeps/ieee754/flt-32/e_lgammaf_r.c (sin_pif): Likewise.
* sysdeps/ieee754/flt-32/lgamma_negf.c (__lgamma_negf): Likewise.
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
Likewise.
* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
* sysdeps/ieee754/ldbl-128/lgamma_negl.c (__lgamma_negl):
Likewise.
* sysdeps/ieee754/ldbl-128/s_expm1l.c (__expm1l): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c (__ieee754_lgammal_r):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/lgamma_negl.c (__lgamma_negl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c (__expm1l): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_truncl.c (__truncl): Likewise.
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c (sin_pi): Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_negl.c (__lgamma_negl): Likewise.
* sysdeps/powerpc/power5+/fpu/s_modf.c (__modf): Likewise.
* sysdeps/powerpc/power5+/fpu/s_modff.c (__modff): Likewise.
The sysdeps/ieee754/ldbl-opt version of math_ldbl_opt.h includes
math.h and math_private.h, despite not having any need for those
headers itself; the sysdeps/generic version doesn't. About 20 files
are relying on math_ldbl_opt.h to include math.h and/or math_private.h
for them, even though none of them necessarily used on a platform that
needs ldbl-opt support.
* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.h: Don't include
math.h or math_private.h.
* sysdeps/alpha/fpu/s_isnan.c
* sysdeps/ieee754/ldbl-128ibm/s_ceill.c
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c
* sysdeps/ieee754/ldbl-128ibm/s_llrintl.c
* sysdeps/ieee754/ldbl-128ibm/s_llroundl.c
* sysdeps/ieee754/ldbl-128ibm/s_lrintl.c
* sysdeps/ieee754/ldbl-128ibm/s_lroundl.c
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c
* sysdeps/ieee754/ldbl-128ibm/s_roundl.c
* sysdeps/ieee754/ldbl-128ibm/s_truncl.c
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/e_hypot.c
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/e_hypotf.c:
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf.c
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypot.c
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypotf.c:
Include math_private.h.
* sysdeps/ieee754/ldbl-64-128/s_finitel.c
* sysdeps/ieee754/ldbl-64-128/s_fpclassifyl.c
* sysdeps/ieee754/ldbl-64-128/s_isinfl.c
* sysdeps/ieee754/ldbl-64-128/s_isnanl.c
* sysdeps/ieee754/ldbl-64-128/s_signbitl.c
* sysdeps/powerpc/power7/fpu/s_logb.c:
Include math.h and math_private.h.
The ldbl-128ibm implementations of ceill, floorl, roundl, truncl,
rintl and nearbyintl wrongly return an sNaN when given an sNaN
argument. This patch fixes them to add such an argument to itself to
turn it into a quiet NaN. (The code structure means this "else" case
applies to any argument which is zero or not finite; it's OK to do
this in all such cases.)
Tested for powerpc.
[BZ #20156]
* sysdeps/ieee754/ldbl-128ibm/s_ceill.c (__ceill): Add high part
to itself when zero or not finite.
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c (__floorl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c (__rintl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_roundl.c (__roundl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_truncl.c (__truncl): Likewise.
The ldbl-128ibm implementation of floorl is only correct in
round-to-nearest mode (in other modes, there are incorrect results and
overflow exceptions in some cases going beyond the incorrect signs of
zero results noted in bug 17899). It is also unnecessarily
complicated, rounding both high and low parts to the nearest integer
and then adjusting for the semantics of floor, when it seems more
natural to take the floor of the high part (__floor optimized inline
versions can be used), and that of the low part if the high part is an
integer. This patch makes it use that simpler approach, with a
canonicalization that works in all rounding modes (given that the only
way the result can be noncanonical is if taking the floor of a
negative noninteger low part increased its exponent).
Tested for powerpc, where over a thousand failures are removed from
test-ldouble.out (floorl problems affect many powl tests).
[BZ #17899]
* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h (ldbl_canonicalize_int):
New function.
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c (__floorl): Use __floor
on high and low parts then use ldbl_canonicalize_int if needed.
Jakub Jelinek <jakub@redhat.com>
Roland McGrath <roland@redhat.com>
Steven Munroe <sjmunroe@us.ibm.com>
Alan Modra <amodra@bigpond.net.au>
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Comment fix.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* math/libm-test.inc (check_float_internal): Allow ulp <= 0.5.
(erfc_test): Don't run erfcl (27.0L) test if erfcl (27.0L) is
denormal.
[TEST_LDOUBLE] (ceil_test, floor_test, llrint_test, llround_test,
rint_test, round_test, trunc_test): Add new tests.
* sysdeps/powerpc/powerpc32/fpu/s_copysignl.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fabs.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fabsl.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fdim.c: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fmax.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fmin.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_isnan.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_ceill.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_copysignl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fabs.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fabsl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fdim.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_floorl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fmax.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fmin.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_isnan.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llrintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llroundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_lrintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_lroundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_rintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_roundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_truncl.S: New file.
* sysdeps/unix/sysv/linux/powerpc/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/configure.in: New file.
* sysdeps/unix/sysv/linux/powerpc/configure: New file.
* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
(__LONG_DOUBLE_MATH_OPTIONAL): Define.
(__NO_LONG_DOUBLE_MATH): Define.
* sysdeps/unix/sysv/linux/powerpc/nldbl-abi.h: New file.
* sysdeps/powerpc/fpu/s_isnan.c: Include math_ldbl_opt.h.
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (ceill): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (copysignl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (floorl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llrintl, lrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_llround.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llroundl, lroundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_rint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (rintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_round.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (roundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (truncl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (ceill): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (copysignl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (floorl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (lrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (lroundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (rintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_round.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (roundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (truncl): Add compatibility symbols.
* misc/qefgcvt_r.c [LDBL_MIN_10_EXP == -291] (FLOAT_MIN_10_NORM): New.
* sysdeps/powerpc/fpu/bits/mathdef.h (__NO_LONG_DOUBLE_MATH): Remove.
* sysdeps/powerpc/Implies: Add ieee754/ldbl-128ibm.
* sysdeps/powerpc/powerpc32/Implies: Remove powerpc/soft-fp.
* sysdeps/ieee754/ldbl-128ibm/Makefile: New file.
* sysdeps/ieee754/ldbl-128ibm/e_acoshl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_acosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_asinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_atan2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_atanhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_coshl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_expl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_j0l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_j1l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_log10l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_log2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_logl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_powl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_sqrtl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/ieee754.h: New file.
* sysdeps/ieee754/ldbl-128ibm/k_cosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_sinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/ldbl2mpn.c: New file.
* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h: New file.
* sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/printf_fphex.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_asinhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_atanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_cbrtl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_cosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_erfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_fabsl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_finitel.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_fpclassifyl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_frexpl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_ilogbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_isinfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_isnanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_logbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_modfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_remquol.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_scalblnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_signbitl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_sinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_tanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_truncl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/t_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/w_expl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_copysignl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_llrintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_llroundl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_roundl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_ceill.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_lrintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_lroundl.c: New file.
* sysdeps/ieee754/ldbl-128/e_powl.c: Fix old comment.
