The strlen might trigger and invalid GOT entry if it used before
the process is self-relocated (for instance on dl-tunables if any
error occurs).
For i386, _dl_writev with PIE requires to use the old 'int $0x80'
syscall mode because the calling the TLS register (gs) is not yet
initialized.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
All the crypt related functions, cryptographic algorithms, and
make requirements are removed, with only the exception of md5
implementation which is moved to locale folder since it is
required by localedef for integrity protection (libc's
locale-reading code does not check these, but localedef does
generate them).
Besides thec code itself, both internal documentation and the
manual is also adjusted. This allows to remove both --enable-crypt
and --enable-nss-crypt configure options.
Checked with a build for all affected ABIs.
Co-authored-by: Zack Weinberg <zack@owlfolio.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ISO C2x defines scanf length modifiers wN (for intN_t / int_leastN_t /
uintN_t / uint_leastN_t) and wfN (for int_fastN_t / uint_fastN_t).
Add support for those length modifiers, similar to the printf support
previously added.
Tested for x86_64 and x86.
Avoid potential stack overflow from unbounded alloca. Use the existing
scratch_buffer instead.
Add testcases to exercise the code as suggested by Adhemerval Zanella Netto.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some locales define a list of mapping pairs of alternate digits and
separators for input digits (to_inpunct). This require the scanf
to create a list of all possible inputs for the optional type
modifier 'I'.
Checked on x86_64-linux-gnu.
Reviewed-by: Joe Simmons-Talbott <josimmon@redhat.com>
Since the _FORTIFY_SOURCE feature uses some routines of Glibc, they need to
be excluded from the fortification.
On top of that:
- some tests explicitly verify that some level of fortification works
appropriately, we therefore shouldn't modify the level set for them.
- some objects need to be build with optimization disabled, which
prevents _FORTIFY_SOURCE to be used for them.
Assembler files that implement architecture specific versions of the
fortified routines were not excluded from _FORTIFY_SOURCE as there is no
C header included that would impact their behavior.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Few tests using swprintf are passing incorrect maxlen parameter.
This triggers an abort when _FORTIFY_SOURCE is enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
ISO C2x defines scanf %b for input of binary integers (with an
optional 0b or 0B prefix). Implement such support, along with the
corresponding SCNb* macros in <inttypes.h>. Unlike the support for
binary integers with 0b or 0B prefix with scanf %i, this is supported
in all versions of scanf (independent of the standards mode used for
compilation), because there are no backwards compatibility concerns
(%b wasn't previously a supported format) the way there were for %i.
Tested for x86_64 and x86.
ISO C2x defines printf length modifiers wN (for intN_t / int_leastN_t
/ uintN_t / uint_leastN_t) and wfN (for int_fastN_t / uint_fastN_t).
Add support for those length modifiers (such a feature was previously
requested in bug 24466). scanf support is to be added separately.
GCC 13 has format checking support for these modifiers.
When used with the support for registering format specifiers, these
modifiers are translated to existing flags in struct printf_info,
rather than trying to add some way of distinguishing them without
breaking the printf_info ABI. C2x requires an error to be returned
for unsupported values of N; this is implemented for printf-family
functions, but the parse_printf_format interface doesn't support error
returns, so such an error gets discarded by that function.
Tested for x86_64 and x86.
With fortification enabled, fgets calls return result needs to be checked,
has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, fread calls return result needs to be checked,
has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
When enabling _FORTIFY_SOURCE, some functions now lead to warnings when
their result is not checked.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, few function calls return result need to be
checked, has they get the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, ftruncate calls return result needs to be
checked, has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Sort tests against updated scripts/sort-makefile-lines.py.
No changes in generated code.
No regressions on x86_64 and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reflow Makefile.
Sort using scripts/sort-makefile-lines.py.
Code generation is changed as routines are linked in sorted order
as expected.
No regressions on x86_64 and i686.
In this case, _itoa_word () is already defined inline in the header (see
sysdeps/generic/_itoa.h), and the second definition causes an error.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230319151017.531737-11-bugaevc@gmail.com>
Instead of using a special ELF section along with a linker script
directive to put the IO vtables within the RELRO section, the libio
vtables are all moved to an array marked as data.relro (so linker
will place in the RELRO segment without the need of extra directives).
To avoid static linking namespace issues and including all vtable
referenced objects, all required function pointers are set to weak alias.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Instead define the required fields in system dependend files. The only
system dependent definition is FILENAME_MAX, which should match POSIX
PATH_MAX, and it is obtained from either kernel UAPI or mach headers.
Currently set pre-defined value from current kernels.
It avoids a circular dependendy when including stdio.h in
gen-as-const-headers files.
Checked on x86_64-linux-gnu and i686-linux-gnu
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
They are both used by __libc_freeres to free all library malloc
allocated resources to help tooling like mtrace or valgrind with
memory leak tracking.
The current scheme uses assembly markers and linker script entries
to consolidate the free routine function pointers in the RELRO segment
and to be freed buffers in BSS.
This patch changes it to use specific free functions for
libc_freeres_ptrs buffers and call the function pointer array directly
with call_function_static_weak.
It allows the removal of both the internal macros and the linker
script sections.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Exactly the same as 35bcb08eaa.
If using -D_FORITFY_SOURCE=3 (in my case, I've patched GCC to add
=3 instead of =2 (we've done =2 for years in Gentoo)), building
glibc tests will fail on tst-bz11319-fortify2 like:
```
<command-line>: error: "_FORTIFY_SOURCE" redefined [-Werror]
<built-in>: note: this is the location of the previous definition
cc1: all warnings being treated as errors
```
It's just because we're always setting -D_FORTIFY_SOURCE=2
rather than unsetting it first. If F_S is already 2, it's harmless,
but if it's another value (say, 1, or 3), the compiler will bawk.
(I'm not aware of a reason this couldn't be tested with =3,
but the toolchain support is limited for that (too new), and we want
to run the tests everywhere possible.)
As Siddhesh noted previously, we could implement some fallback
logic to determine the maximal F_S value supported by the toolchain,
which is a bit easier now that autoconf-archive has been updated for F_S=3
(https://github.com/autoconf-archive/autoconf-archive/pull/269), but let's
revisit this if it continues to crop up.
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
WG14 recently accepted two additions to the printf/scanf %b/%B
support: there are now PRIb* and SCNb* macros in <inttypes.h>, and
printf %B is now an optional feature defined in normative text,
instead of recommended practice, with corresponding PRIB* macros that
can also be used to test whether that optional feature is supported.
See N3072 items 14 and 15 for details (those changes were accepted,
some other changes in that paper weren't).
Add the corresponding PRI* macros to glibc and update one place in the
manual referring to %B as recommended. (SCNb* should naturally be
added at the same time as the corresponding scanf %b support.)
Tested for x86_64 and x86.
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants for the %i scanf format (in addition to the %b format,
which isn't yet implemented for scanf in glibc). Implement that scanf
support for glibc.
As with the strtol support, this is incompatible with previous C
standard versions, in that such an input string starting with 0b or 0B
was previously required to be parsed as 0 (with the rest of the input
potentially matching subsequent parts of the scanf format string).
Thus this patch adds 12 new __isoc23_* functions per long double
format (12, 24 or 36 depending on how many long double formats the
glibc configuration supports), with appropriate header redirection
support (generally very closely following that for the __isoc99_*
scanf functions - note that __GLIBC_USE (DEPRECATED_SCANF) takes
precedence over __GLIBC_USE (C2X_STRTOL), so the case of GNU
extensions to C89 continues to get old-style GNU %a and does not get
this new feature). The function names would remain as __isoc23_* even
if C2x ends up published in 2024 rather than 2023.
When scanf %b support is added, I think it will be appropriate for all
versions of scanf to follow C2x rules for inputs to the %b format
(given that there are no compatibility concerns for a new format).
Tested for x86_64 (full glibc testsuite). The first version was also
tested for powerpc (32-bit) and powerpc64le (stdio-common/ and wcsmbs/
tests), and with build-many-glibcs.py.
This is a partial fix for mishandling of grouping when formatting
integers. It properly computes the width in the presence of grouping
characters when the width is larger than the number of significant
digits. The precision related issue is documented in bug 23432.
Co-authored-by: Andreas Schwab <schwab@suse.de>
The __printf_buffer_flush_dprintf function needs to record that
the buffer has been written before reusing it. Without this
accounting, dprintf always returns zero.
Fixes commit 8ece45e4f5
("libio: Convert __vdprintf_internal to buffers").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Always null-terminate the buffer and set E2BIG if the buffer is too
small. This fixes bug 27857.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The internal buffer size is set to 2048 bytes. This is less than
the original BUFSIZ value used by buffered_vfprintf before
the conversion, but it hopefully covers all cases where write
boundaries matter.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The buffer resizing algorithm is slightly different. The initial
buffer is on the stack, and small buffers are directly allocated
on the heap using the exact required size. The overhead of the
additional copy is compensated by the lowered setup cost for buffers
compared to libio streams.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
After the rewrite and the implicit unbuffered streams handling, this
is very straightforward to add.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
vfprintf is entangled with vfwprintf (of course), __printf_fp,
__printf_fphex, __vstrfmon_l_internal, and the strfrom family of
functions. The latter use the internal snprintf functionality,
so vsnprintf is converted as well.
The simples conversion is __printf_fphex, followed by
__vstrfmon_l_internal and __printf_fp, and finally
__vfprintf_internal and __vfwprintf_internal. __vsnprintf_internal
and strfrom* are mostly consuming the new interfaces, so they
are comparatively simple.
__printf_fp is a public symbol, so the FILE *-based interface
had to preserved.
The __printf_fp rewrite does not change the actual binary-to-decimal
conversion algorithm, and digits are still not emitted directly to
the target buffer. However, the staging buffer now uses bytes
instead of wide characters, and one buffer copy is eliminated.
The changes are at least performance-neutral in my testing.
Floating point printing and snprintf improved measurably, so that
this Lua script
for i=1,5000000 do
print(i, i * math.pi)
end
runs about 5% faster for me. To preserve fprintf performance for
a simple "%d" format, this commit has some logic changes under
LABEL (unsigned_number) to avoid additional function calls. There
are certainly some very easy performance improvements here: binary,
octal and hexadecimal formatting can easily avoid the temporary work
buffer (the number of digits can be computed ahead-of-time using one
of the __builtin_clz* built-ins). Decimal formatting can use a
specialized version of _itoa_word for base 10.
The existing (inconsistent) width handling between strfmon and printf
is preserved here. __print_fp_buffer_1 would have to use
__translated_number_width to achieve ISO conformance for printf.
Test expectations in libio/tst-vtables-common.c are adjusted because
the internal staging buffer merges all virtual function calls into
one.
In general, stack buffer usage is greatly reduced, particularly for
unbuffered input streams. __printf_fp can still use a large buffer
in binary128 mode for %g, though.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This function will be used to compute the width of a number
after i18n digit translation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And __wprintf_function_invoke. These functions will be used to
to call registered printf specifier callbacks on printf buffers
after vfprintf and vfwprintf have been converted to buffers. The new
implementation avoids alloca/variable length arrays.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These buffers will eventually be used instead of FILE * objects
to implement printf functions. The multibyte buffer is struct
__printf_buffer, the wide buffer is struct __wprintf_buffer.
To enable writing type-generic code, the header files
printf_buffer-char.h and printf_buffer-wchar_t.h define the
Xprintf macro differently, enabling Xprintf (buffer) to stand
for __printf_buffer and __wprintf_buffer as appropriate. For
common cases, macros like Xprintf_buffer are provided as a more
syntactically convenient shortcut.
Buffer-specific flush callbacks are implemented with a switch
statement instead of a function pointer, to avoid hardening issues
similar to those of libio vtables. struct __printf_buffer_as_file
is needed to support custom printf specifiers because the public
interface for that requires passing a FILE *, which is why there
is a trapdoor back from these buffers to FILE * streams.
Since the immediate user of these interfaces knows when processing
has finished, there is no flush callback for the end of processing,
only a flush callback for the intermediate buffer flush.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The iterator allows grouping while scanning forward through
the digits. This enables emitting digits as they are processed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
clang emits an warning when a double alias redirection is used, to warn
the the original symbol will be used even when weak definition is
overridden. However, this is a common pattern for weak_alias, where
multiple alias are set to same symbol.
Reviewed-by: Fangrui Song <maskray@google.com>
sscanf is only defined on nul terminated string input, but '\0' was
missing in this test which caused _IO_str_init_static_internal to
read OOB on the stack when computing the bounds of the string.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
03ad444e8e ("mach: Fix incoherency between perror and strerror") fixesd
the output of error messages, but tst-sprintf-errno.c was still checking
the old (erroneous) format length. This updates the expected output length
according to the 03ad444e8e fix.
03ad444e8e ("mach: Fix incoherency between perror and strerror")
fixesd the output of error messages, but tst-sprintf-errno.c was still
checking the old (erroneous) format. This updates the expected output
according to the 03ad444e8e fix.
Some architectures (mips, powerpc and sparc) define separate values for
EDEADLOCK and EDEADLK. Readd the errlist entry for EDEADLOCK for those
configurations. Also use the dependency files from generating the
auxiliary errlist and siglist files.
