Commit Graph

19 Commits

Author SHA1 Message Date
Joseph Myers
6d7e8eda9b Update copyright dates with scripts/update-copyrights 2023-01-06 21:14:39 +00:00
Siddhesh Poyarekar
f4f2ca1509 realloc: Return unchanged if request is within usable size
If there is enough space in the chunk to satisfy the new size, return
the old pointer as is, thus avoiding any locks or reallocations.  The
only real place this has a benefit is in large chunks that tend to get
satisfied with mmap, since there is a large enough spare size (up to a
page) for it to matter.  For allocations on heap, the extra size is
typically barely a few bytes (up to 15) and it's unlikely that it would
make much difference in performance.

Also added a smoke test to ensure that the old pointer is returned
unchanged if the new size to realloc is within usable size of the old
pointer.

Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
2022-12-08 11:23:43 -05:00
Florian Weimer
d653fd2d9e malloc: Exit early on test failure in tst-realloc
This addresses more (correct) use-after-free warnings reported by
GCC 12 on some targets.

Fixes commit c094c232eb ("Avoid
-Wuse-after-free in tests [BZ #26779].").

Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
2022-03-10 08:50:51 +01:00
Martin Sebor
c094c232eb Avoid -Wuse-after-free in tests [BZ #26779].
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2022-01-26 10:38:23 -07:00
Paul Eggert
581c785bf3 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.

I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah.  I don't
know why I run into these diagnostics whereas others evidently do not.

remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
2022-01-01 11:40:24 -08:00
Paul Eggert
2b778ceb40 Update copyright dates with scripts/update-copyrights
I used these shell commands:

../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")

and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
2021-01-02 12:17:34 -08:00
Joseph Myers
d614a75396 Update copyright dates with scripts/update-copyrights. 2020-01-01 00:14:33 +00:00
Paul Eggert
5a82c74822 Prefer https to http for gnu.org and fsf.org URLs
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:

sed -ri '
  s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
  s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
  $(find $(git ls-files) -prune -type f \
      ! -name '*.po' \
      ! -name 'ChangeLog*' \
      ! -path COPYING ! -path COPYING.LIB \
      ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
      ! -path manual/texinfo.tex ! -path scripts/config.guess \
      ! -path scripts/config.sub ! -path scripts/install-sh \
      ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
      ! -path INSTALL ! -path  locale/programs/charmap-kw.h \
      ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
      ! '(' -name configure \
            -execdir test -f configure.ac -o -f configure.in ';' ')' \
      ! '(' -name preconfigure \
            -execdir test -f preconfigure.ac ';' ')' \
      -print)

and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:

  chmod a+x sysdeps/unix/sysv/linux/riscv/configure
  # Omit irrelevant whitespace and comment-only changes,
  # perhaps from a slightly-different Autoconf version.
  git checkout -f \
    sysdeps/csky/configure \
    sysdeps/hppa/configure \
    sysdeps/riscv/configure \
    sysdeps/unix/sysv/linux/csky/configure
  # Omit changes that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
  git checkout -f \
    sysdeps/powerpc/powerpc64/ppc-mcount.S \
    sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
  # Omit change that caused a pre-commit check to fail like this:
  # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
  git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 02:43:31 -07:00
Joseph Myers
04277e02d7 Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2019-01-01 00:11:28 +00:00
Joseph Myers
688903eb3e Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates
	using scripts/update-copyrights.
	* locale/programs/charmap-kw.h: Regenerated.
	* locale/programs/locfile-kw.h: Likewise.
2018-01-01 00:32:25 +00:00
Aurelien Jarno
f8aa69be44 tst-realloc: do not check for errno on success [BZ #22611]
POSIX explicitly says that applications should check errno only after
failure, so the errno value can be clobbered on success as long as it
is not set to zero.

Changelog:
	[BZ #22611]
	* malloc/tst-realloc.c (do_test): Remove the test checking that errno
	is unchanged on success.
2017-12-29 14:44:57 +01:00
Zack Weinberg
e15f7de60c Split DIAG_* macros to new header libc-diag.h.
Quite a few tests include libc-internal.h just for the DIAG_* macros.
Split those macros to their own file, which can be included safely in
_ISOMAC mode.  I also moved ignore_value, since it seems logically
related, even though I didn't notice any tests needing it.

Also add -Wnonnull suppressions to two tests that _should_ have them,
but the error is masked when compiling against internal headers.

	* include/libc-diag.h: New file.  Define ignore_value,
	DIAG_PUSH_NEEDS_COMMENT, DIAG_POP_NEEDS_COMMENT,
	DIAG_IGNORE_NEEDS_COMMENT, and DIAG_IGNORE_Os_NEEDS_COMMENT here.

	* include/libc-internal.h: Definitions of above macros moved from
	here.  Include libc-diag.h.  Add copyright notice.

	* malloc/tst-malloc.c, malloc/tst-memcheck.c, malloc/tst-realloc.c
	* misc/tst-error1.c, posix/tst-dir.c, stdio-common/bug21.c
	* stdio-common/scanf14.c, stdio-common/scanf4.c, stdio-common/scanf7.c
	* stdio-common/test-vfprintf.c, stdio-common/tst-printf.c
	* stdio-common/tst-printfsz.c, stdio-common/tst-sprintf.c
	* stdio-common/tst-unlockedio.c, stdio-common/tstdiomisc.c
	* stdlib/bug-getcontext.c, string/tester.c, string/tst-endian.c
	* time/tst-strptime2.c, wcsmbs/tst-wcstof.c:
	Include libc-diag.h instead of libc-internal.h.

	* stdlib/tst-environ.c: Include libc-diag.h.  Suppress -Wnonnull for
	call to unsetenv (NULL).
	* nptl/tst-mutex1.c: Include libc-diag.h.  Suppress -Wnonnull for
	call to pthread_mutexattr_destroy (NULL).
2017-02-25 09:59:46 -05:00
Joseph Myers
3d7229c250 Fix malloc/ tests for GCC 7 -Walloc-size-larger-than=.
GCC 7 has a -Walloc-size-larger-than= warning for allocations of half
the address space or more.  This causes errors building glibc tests
that deliberately test failure of very large allocations.  This patch
arranges for this warning to be ignored around the problematic
function calls.

Tested compilation for aarch64 (GCC mainline) with
build-many-glibcs.py; did execution testing for x86_64 (GCC 5).

	* malloc/tst-malloc.c: Include <libc-internal.h>.
	(do_test): Disable -Walloc-size-larger-than= around tests of
	malloc with negative sizes.
	* malloc/tst-mcheck.c: Include <libc-internal.h>.
	(do_test): Disable -Walloc-size-larger-than= around tests of
	malloc and realloc with negative sizes.
	* malloc/tst-realloc.c: Include <libc-internal.h>.
	(do_test): Disable -Walloc-size-larger-than= around tests of
	realloc with negative sizes.
2017-01-04 23:32:14 +00:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Joseph Myers
f7a9f785e5 Update copyright dates with scripts/update-copyrights. 2016-01-04 16:05:18 +00:00
Joseph Myers
b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
Ondřej Bílka
6c8dbf00f5 Reformat malloc to gnu style. 2014-01-02 09:40:10 +01:00
Allan McRae
d4697bc93d Update copyright notices with scripts/update-copyrights 2014-01-01 22:00:23 +10:00
Will Newton
0c66b8e985 malloc: Add realloc test.
The current tests don't test the functionality of realloc in detail.
Add a new test for realloc that exercises some of the corner cases
that are not otherwise tested.

ChangeLog:

2013-09-09  Will Newton  <will.newton@linaro.org>

	* malloc/Makefile: Add tst-realloc to tests.
	* malloc/tst-realloc.c: New file.
2013-09-09 09:20:09 +01:00