The PAGE_SIZE from the Mach headers statically defines the machine's
page size. There's no need to query it dynamically; furthermore, the
implementation of the vm_statistics () RPC unconditionally fills in
pagesize = PAGE_SIZE;
Not doing the extra RPC shaves off 2 RPCs from the start-up of every
process!
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230218203717.373211-7-bugaevc@gmail.com>
And make it a bit more 64-bit ready. This is in preparation to moving this
file into x86/
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230218203717.373211-6-bugaevc@gmail.com>
This ensures that a timer_t value can be cast to struct timer_node *
and back.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230218203717.373211-5-bugaevc@gmail.com>
Fix a few more cases of build errors caused by mismatched types. This is a
continuation of f4315054b4.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230218203717.373211-3-bugaevc@gmail.com>
This is going to be done differently on x86_64.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230218203717.373211-2-bugaevc@gmail.com>
Add extra check for compiler definitions to ensure that compiler provides
sqrt and fma hw fpu instructions else use software implementation.
As divide/sqrt and FMA hw support from CPU side is optional,
the compiler can be configured by options to generate hw FPU instructions,
but without use of FDDIV, FDSQRT, FSDIV, FSSQRT, FDMADD and FSMADD
instructions. In this case __builtin_sqrt and __builtin_sqrtf provided by
compiler can't be used inside the glibc code, as these builtins are used
in implementations of sqrt() and sqrtf() functions but at the same time
these builtins unfold to sqrt() and sqrtf(). So it is possible to receive
code like that:
0001c4b4 <__ieee754_sqrtf>:
1c4b4: 0001 0000 b 0 ;1c4b4 <__ieee754_sqrtf>
The same is also true for __builtin_fma and __builtin_fmaf.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The ARCv2 ABI requires 4 byte stack pointer alignment. Don't allow to
use unaligned child stack in clone. As the stack grows down,
align it down.
This was pointed by misc/tst-misalign-clone-internal and
misc/tst-misalign-clone tests. Stack alignmet fixes these tests
fails.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use put/get macros __builtin_bswap32 instead. It allows to remove
the unaligned routines, the compiler will generate unaligned access
if the ABI allows it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
And use a packed structure instead. The compiler generates optimized
unaligned code if the architecture supports it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
It only adds a small overhead for unaligned inputs (which should not
be common) and unify the code.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Assume unaligned inputs on all cases. The code is built and used only
in compat mode.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Builds for s390 recently started failing with:
../sysdeps/s390/multiarch/ifunc-impl-list.c: In function '__libc_ifunc_impl_list':
../sysdeps/s390/multiarch/ifunc-impl-list.c:83:21: error: unused variable 'dl_hwcap' [-Werror=unused-variable]
83 | unsigned long int dl_hwcap = features->hwcap;
| ^~~~~~~~
https://sourceware.org/pipermail/libc-testresults/2023q1/010855.html
Add __attribute__ ((unused)) as already done for another variable
there.
Tested with build-many-glibcs.py (compilers and glibcs) for
s390x-linux-gnu and s390-linux-gnu.
Note: s390x-linux-gnu-O3 started failing with a different error
earlier; that problem may still need to be fixed after this fix is in.
https://sourceware.org/pipermail/libc-testresults/2023q1/010829.html
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants in strtol-family functions when the base passed is 0
or 2. Implement that strtol support for glibc.
As discussed at
<https://sourceware.org/pipermail/libc-alpha/2020-December/120414.html>,
this is incompatible with previous C standard versions, in that such
an input string starting with 0b or 0B was previously required to be
parsed as 0 (with the rest of the string unprocessed). Thus, as
proposed there, this patch adds 20 new __isoc23_* functions with
appropriate header redirection support. This patch does *not* do
anything about scanf %i (which will need 12 new functions per long
double variant, so 12, 24 or 36 depending on the glibc configuration),
instead leaving that for a future patch. The function names would
remain as __isoc23_* even if C2x ends up published in 2024 rather than
2023.
Making this change leads to the question of what should happen to
internal uses of these functions in glibc and its tests. The header
redirection (which applies for _GNU_SOURCE or any other feature test
macros enabling C2x features) has the effect of redirecting internal
uses but without those uses then ending up at a hidden alias (see the
comment in include/stdio.h about interaction with libc_hidden_proto).
It seems desirable for the default for internal uses to be the same
versions used by normal code using _GNU_SOURCE, so rather than doing
anything to disable that redirection, similar macro definitions to
those in include/stdio.h are added to the include/ headers for the new
functions.
Given that the default for uses in glibc is for the redirections to
apply, the next question is whether the C2x semantics are correct for
all those uses. Uses with the base fixed to 10, 16 or any other value
other than 0 or 2 can be ignored. I think this leaves the following
internal uses to consider (an important consideration for review of
this patch will be both whether this list is complete and whether my
conclusions on all entries in it are correct):
benchtests/bench-malloc-simple.c
benchtests/bench-string.h
elf/sotruss-lib.c
math/libm-test-support.c
nptl/perf.c
nscd/nscd_conf.c
nss/nss_files/files-parse.c
posix/tst-fnmatch.c
posix/wordexp.c
resolv/inet_addr.c
rt/tst-mqueue7.c
soft-fp/testit.c
stdlib/fmtmsg.c
support/support_test_main.c
support/test-container.c
sysdeps/pthread/tst-mutex10.c
I think all of these places are OK with the new semantics, except for
resolv/inet_addr.c, where the POSIX semantics of inet_addr do not
allow for binary constants; thus, I changed that file (to use
__strtoul_internal, whose semantics are unchanged) and added a test
for this case. In the case of posix/wordexp.c I think accepting
binary constants is OK since POSIX explicitly allows additional forms
of shell arithmetic expressions, and in stdlib/fmtmsg.c SEV_LEVEL is
not in POSIX so again I think accepting binary constants is OK.
Functions such as __strtol_internal, which are only exported for
compatibility with old binaries from when those were used in inline
functions in headers, have unchanged semantics; the __*_l_internal
versions (purely internal to libc and not exported) have a new
argument to specify whether to accept binary constants.
As well as for the standard functions, the header redirection also
applies to the *_l versions (GNU extensions), and to legacy functions
such as strtoq, to avoid confusing inconsistency (the *q functions
redirect to __isoc23_*ll rather than needing their own __isoc23_*
entry points). For the functions that are only declared with
_GNU_SOURCE, this means the old versions are no longer available for
normal user programs at all. An internal __GLIBC_USE_C2X_STRTOL macro
is used to control the redirections in the headers, and cases in glibc
that wish to avoid the redirections - the function implementations
themselves and the tests of the old versions of the GNU functions -
then undefine and redefine that macro to allow the old versions to be
accessed. (There would of course be greater complexity should we wish
to make any of the old versions into compat symbols / avoid them being
defined at all for new glibc ABIs.)
strtol_l.c has some similarity to strtol.c in gnulib, but has already
diverged some way (and isn't listed at all at
https://sourceware.org/glibc/wiki/SharedSourceFiles unlike strtoll.c
and strtoul.c); I haven't made any attempts at gnulib compatibility in
the changes to that file.
I note incidentally that inttypes.h and wchar.h are missing the
__nonnull present on declarations of this family of functions in
stdlib.h; I didn't make any changes in that regard for the new
declarations added.
This macro from Mach headers conflicts with how
sysdeps/x86_64/multiarch/strcmp-sse2.S expects it to be defined.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230214173722.428140-3-bugaevc@gmail.com>
* Micro-optimize TLS access using GCC's native support for gs-based
addressing when available;
* Just use THREAD_GETMEM and THREAD_SETMEM instead of more inline
assembly;
* Sync tcbhead_t layout with NPTL, in particular update/fix __private_ss
offset;
* Statically assert that the two offsets that are a part of ABI are what
we expect them to be.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230214173722.428140-2-bugaevc@gmail.com>
ISO C does not support omitting parameter names in function definitions
before C2X,the compiler is giving an error with older versions of gcc and
this commit will resolve the test failure "error: parameter name omitted"
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These are supposed to stay 32-bit even on 64-bit systems. This matches
BSD and Linux, as well as how these types are already defined in
tioctl.defs
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
'sem' is the opaque 'sem_t', 'isem' is the actual 'struct new_sem'.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230212111044.610942-6-bugaevc@gmail.com>
This does not seem like it is supposed to return negative error codes.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230212111044.610942-5-bugaevc@gmail.com>
When casting between a pointer and an integer of a different size, GCC
emits a warning (which is escalated to a build failure by -Werror).
Indeed, if what you start with is a pointer, which you then cast to a
shorter integer and then back again, you're going to cut off some bits
of the pointer.
But if you start with an integer (such as mach_port_t), then cast it to
a longer pointer (void *), and then back to a shorter integer, you are
fine. To keep GCC happy, cast through an intermediary uintptr_t, which
is always the same size as a pointer.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230212111044.610942-4-bugaevc@gmail.com>
It has been decided that on x86_64, mach_msg_type_number_t stays 32-bit.
Therefore, it's not possible to use mach_msg_type_number_t
interchangeably with size_t, in particular this breaks when a pointer to
a variable is passed to a MIG routine.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230212111044.610942-3-bugaevc@gmail.com>
Make the code flow more linear using early returns where possible. This
makes it so much easier to reason about what runs on error / successful
code paths.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230212111044.610942-2-bugaevc@gmail.com>
Likewise use __builtin_LINE instead of __LINE__.
When building C++, inline functions are required to have the exact same
sequence of tokens in every translation unit. But __FILE__ token, when
used in a header file, does not necessarily expand to the exact same
string literal, and that may cause compilation failure when C++ modules
are being used. (It would also cause unpredictable output on assertion
failure at runtime, but this rarely matters in practice.)
For example, given the following sources:
// a.h
#include <assert.h>
inline void fn () { assert (0); }
// a.cc
#include "a.h"
// b.cc
#include "foo/../a.h"
preprocessing a.cc will yield a call to __assert_fail("0", "a.h", ...)
but b.cc will yield __assert_fail("0", "foo/../a.h", ...)
We used to use .cfi_adjust_cfa_offset around %esp manipulation
asm instructions to fix unwinding, but when building glibc with
-fno-omit-frame-pointer this is bogus since in that case %ebp is the CFA and
does not move.
Instead, let's force -fno-omit-frame-pointer when building intr-msg.c so
that %ebp can always be used and no .cfi_adjust_cfa_offset is needed.
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
The powerpc64 ABI requires an initial stackframe so the child can
store/restore the TOC. It is create prior calling clone3 by
adjusting the stack size (since kernel will compute the stack as
stack plus size).
Checked on powerpc64-linux-gnu (power8, kernel 6.0) and
powerpc64le-linux-gnu (power9, kernel 4.18).
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
For powerpc, strncmp is used on _dl_string_platform issued by
__tcb_parse_hwcap_and_convert_at_platform.
Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
Although static linker can optimize it to local call, it follows the
internal scheme to provide hidden proto and definitions.
Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
Although static linker can optimize it to local call, it follows the
internal scheme to provide hidden proto and definitions.
Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
The test is sufficient to detect the ldconfig bug fixed in
commit 9fe6f63638 ("elf: Fix 64 time_t
support for installed statically binaries").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The hard float abi and hard float are different,
Hard float abi: Use float register to pass float type arguments.
Hard float: Enable the hard float ISA feature.
So the with_fp_cond cannot represent these two features. When
-mfloat-abi=softfp, the float abi is soft and hard float is enabled.
So add 'with_hard_float_abi' in preconfigure and define 'CSKY_HARD_FLOAT_ABI'
if float abi is hard, and use 'CSKY_HARD_FLOAT_ABI' to determine
dynamic linker because it is what determines compatibility.
And with_fp_cond is still needed to tell glibc whether to enable
hard floating feature.
In addition, use AC_TRY_COMMAND to test gcc to ensure compatibility
between different versions of gcc. The original way has a problem
that __CSKY_HARD_FLOAT_FPU_SF__ means the target only has single
hard float-points ISA, so it's not defined in CPUs like ck810f.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
