mirror of
https://sourceware.org/git/glibc.git
synced 2024-11-22 13:00:06 +00:00
326e74e7c1
1401 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Adhemerval Zanella
|
243f59e5aa |
Update i386 libm-test-ulps.
Updated ulps after recent commit "[PATCH 1/7] sin/cos slow paths:
avoid slow paths for small inputs"
(
|
||
Maciej W. Rozycki
|
10a446ddcc |
elf: Unify symbol address run-time calculation [BZ #19818]
Wrap symbol address run-time calculation into a macro and use it throughout, replacing inline calculations. There are a couple of variants, most of them different in a functionally insignificant way. Most calculations are right following RESOLVE_MAP, at which point either the map or the symbol returned can be checked for validity as the macro sets either both or neither. In some places both the symbol and the map has to be checked however. My initial implementation therefore always checked both, however that resulted in code larger by as much as 0.3%, as many places know from elsewhere that no check is needed. I have decided the size growth was unacceptable. Having looked closer I realized that it's the map that is the culprit. Therefore I have modified LOOKUP_VALUE_ADDRESS to accept an additional boolean argument telling it to access the map without checking it for validity. This in turn has brought quite nice results, with new code actually being smaller for i686, and MIPS o32, n32 and little-endian n64 targets, unchanged in size for x86-64 and, unusually, marginally larger for big-endian MIPS n64, as follows: i686: text data bss dec hex filename 152255 4052 192 156499 26353 ld-2.27.9000-base.so 152159 4052 192 156403 262f3 ld-2.27.9000-elf-symbol-value.so MIPS/o32/el: text data bss dec hex filename 142906 4396 260 147562 2406a ld-2.27.9000-base.so 142890 4396 260 147546 2405a ld-2.27.9000-elf-symbol-value.so MIPS/n32/el: text data bss dec hex filename 142267 4404 260 146931 23df3 ld-2.27.9000-base.so 142171 4404 260 146835 23d93 ld-2.27.9000-elf-symbol-value.so MIPS/n64/el: text data bss dec hex filename 149835 7376 408 157619 267b3 ld-2.27.9000-base.so 149787 7376 408 157571 26783 ld-2.27.9000-elf-symbol-value.so MIPS/o32/eb: text data bss dec hex filename 142870 4396 260 147526 24046 ld-2.27.9000-base.so 142854 4396 260 147510 24036 ld-2.27.9000-elf-symbol-value.so MIPS/n32/eb: text data bss dec hex filename 142019 4404 260 146683 23cfb ld-2.27.9000-base.so 141923 4404 260 146587 23c9b ld-2.27.9000-elf-symbol-value.so MIPS/n64/eb: text data bss dec hex filename 149763 7376 408 157547 2676b ld-2.27.9000-base.so 149779 7376 408 157563 2677b ld-2.27.9000-elf-symbol-value.so x86-64: text data bss dec hex filename 148462 6452 400 155314 25eb2 ld-2.27.9000-base.so 148462 6452 400 155314 25eb2 ld-2.27.9000-elf-symbol-value.so [BZ #19818] * sysdeps/generic/ldsodefs.h (LOOKUP_VALUE_ADDRESS): Add `set' parameter. (SYMBOL_ADDRESS): New macro. [!ELF_FUNCTION_PTR_IS_SPECIAL] (DL_SYMBOL_ADDRESS): Use SYMBOL_ADDRESS for symbol address calculation. * elf/dl-runtime.c (_dl_fixup): Likewise. (_dl_profile_fixup): Likewise. * elf/dl-symaddr.c (_dl_symbol_address): Likewise. * elf/rtld.c (dl_main): Likewise. * sysdeps/aarch64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/alpha/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/arm/dl-machine.h (elf_machine_rel): Likewise. (elf_machine_rela): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/hppa/dl-symaddr.c (_dl_symbol_address): Likewise. * sysdeps/i386/dl-machine.h (elf_machine_rel): Likewise. (elf_machine_rela): Likewise. * sysdeps/ia64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/m68k/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC): Likewise. (elf_machine_reloc): Likewise. (elf_machine_got_rel): Likewise. * sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise. * sysdeps/nios2/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/riscv/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/tile/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> |
||
Samuel Thibault
|
ad2b41bfd8 |
hurd: Bump remaining LGPL2+ htl licences to LGPL 2.1+
* htl/Makefile: Bump licence to LGPL 2.1+. * htl/alloca_cutoff.c: Likewise. * htl/cthreads-compat.c: Likewise. * htl/lockfile.c: Likewise. * htl/pt-alloc.c: Likewise. * htl/pt-cancel.c: Likewise. * htl/pt-cleanup.c: Likewise. * htl/pt-create.c: Likewise. * htl/pt-dealloc.c: Likewise. * htl/pt-detach.c: Likewise. * htl/pt-exit.c: Likewise. * htl/pt-getattr.c: Likewise. * htl/pt-initialize.c: Likewise. * htl/pt-internal.h: Likewise. * htl/pt-join.c: Likewise. * htl/pt-self.c: Likewise. * htl/pt-setcancelstate.c: Likewise. * htl/pt-setcanceltype.c: Likewise. * htl/pt-sigmask.c: Likewise. * htl/pt-spin-inlines.c: Likewise. * htl/pt-testcancel.c: Likewise. * htl/pt-yield.c: Likewise. * htl/tests/test-1.c: Likewise. * htl/tests/test-10.c: Likewise. * htl/tests/test-11.c: Likewise. * htl/tests/test-12.c: Likewise. * htl/tests/test-13.c: Likewise. * htl/tests/test-14.c: Likewise. * htl/tests/test-15.c: Likewise. * htl/tests/test-16.c: Likewise. * htl/tests/test-17.c: Likewise. * htl/tests/test-2.c: Likewise. * htl/tests/test-3.c: Likewise. * htl/tests/test-4.c: Likewise. * htl/tests/test-5.c: Likewise. * htl/tests/test-6.c: Likewise. * htl/tests/test-7.c: Likewise. * htl/tests/test-8.c: Likewise. * htl/tests/test-9.c: Likewise. * htl/tests/test-__pthread_destroy_specific-skip.c: Likewise. * sysdeps/htl/bits/cancelation.h: Likewise. * sysdeps/htl/bits/pthread-np.h: Likewise. * sysdeps/htl/bits/pthread.h: Likewise. * sysdeps/htl/bits/pthreadtypes.h: Likewise. * sysdeps/htl/bits/semaphore.h: Likewise. * sysdeps/htl/bits/types/__pthread_key.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_attr.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_barrier.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_barrierattr.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_cond.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_condattr.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_mutex.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_mutexattr.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_once.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_rwlock.h: Likewise. * sysdeps/htl/bits/types/struct___pthread_rwlockattr.h: Likewise. * sysdeps/htl/old_pt-atfork.c: Likewise. * sysdeps/htl/pt-atfork.c: Likewise. * sysdeps/htl/pt-attr-destroy.c: Likewise. * sysdeps/htl/pt-attr-getdetachstate.c: Likewise. * sysdeps/htl/pt-attr-getguardsize.c: Likewise. * sysdeps/htl/pt-attr-getinheritsched.c: Likewise. * sysdeps/htl/pt-attr-getschedparam.c: Likewise. * sysdeps/htl/pt-attr-getschedpolicy.c: Likewise. * sysdeps/htl/pt-attr-getscope.c: Likewise. * sysdeps/htl/pt-attr-getstack.c: Likewise. * sysdeps/htl/pt-attr-getstackaddr.c: Likewise. * sysdeps/htl/pt-attr-getstacksize.c: Likewise. * sysdeps/htl/pt-attr-init.c: Likewise. * sysdeps/htl/pt-attr-setdetachstate.c: Likewise. * sysdeps/htl/pt-attr-setguardsize.c: Likewise. * sysdeps/htl/pt-attr-setinheritsched.c: Likewise. * sysdeps/htl/pt-attr-setschedparam.c: Likewise. * sysdeps/htl/pt-attr-setschedpolicy.c: Likewise. * sysdeps/htl/pt-attr-setscope.c: Likewise. * sysdeps/htl/pt-attr-setstack.c: Likewise. * sysdeps/htl/pt-attr-setstackaddr.c: Likewise. * sysdeps/htl/pt-attr-setstacksize.c: Likewise. * sysdeps/htl/pt-attr.c: Likewise. * sysdeps/htl/pt-barrier-destroy.c: Likewise. * sysdeps/htl/pt-barrier-init.c: Likewise. * sysdeps/htl/pt-barrier-wait.c: Likewise. * sysdeps/htl/pt-barrier.c: Likewise. * sysdeps/htl/pt-barrierattr-destroy.c: Likewise. * sysdeps/htl/pt-barrierattr-getpshared.c: Likewise. * sysdeps/htl/pt-barrierattr-init.c: Likewise. * sysdeps/htl/pt-barrierattr-setpshared.c: Likewise. * sysdeps/htl/pt-cond-brdcast.c: Likewise. * sysdeps/htl/pt-cond-destroy.c: Likewise. * sysdeps/htl/pt-cond-init.c: Likewise. * sysdeps/htl/pt-cond-signal.c: Likewise. * sysdeps/htl/pt-cond-timedwait.c: Likewise. * sysdeps/htl/pt-cond-wait.c: Likewise. * sysdeps/htl/pt-cond.c: Likewise. * sysdeps/htl/pt-condattr-destroy.c: Likewise. * sysdeps/htl/pt-condattr-getclock.c: Likewise. * sysdeps/htl/pt-condattr-getpshared.c: Likewise. * sysdeps/htl/pt-condattr-init.c: Likewise. * sysdeps/htl/pt-condattr-setclock.c: Likewise. * sysdeps/htl/pt-condattr-setpshared.c: Likewise. * sysdeps/htl/pt-destroy-specific.c: Likewise. * sysdeps/htl/pt-equal.c: Likewise. * sysdeps/htl/pt-getconcurrency.c: Likewise. * sysdeps/htl/pt-getcpuclockid.c: Likewise. * sysdeps/htl/pt-getschedparam.c: Likewise. * sysdeps/htl/pt-getspecific.c: Likewise. * sysdeps/htl/pt-init-specific.c: Likewise. * sysdeps/htl/pt-key-create.c: Likewise. * sysdeps/htl/pt-key-delete.c: Likewise. * sysdeps/htl/pt-key.h: Likewise. * sysdeps/htl/pt-mutex-destroy.c: Likewise. * sysdeps/htl/pt-mutex-getprioceiling.c: Likewise. * sysdeps/htl/pt-mutex-init.c: Likewise. * sysdeps/htl/pt-mutex-lock.c: Likewise. * sysdeps/htl/pt-mutex-setprioceiling.c: Likewise. * sysdeps/htl/pt-mutex-timedlock.c: Likewise. * sysdeps/htl/pt-mutex-trylock.c: Likewise. * sysdeps/htl/pt-mutex-unlock.c: Likewise. * sysdeps/htl/pt-mutexattr-destroy.c: Likewise. * sysdeps/htl/pt-mutexattr-getprioceiling.c: Likewise. * sysdeps/htl/pt-mutexattr-getprotocol.c: Likewise. * sysdeps/htl/pt-mutexattr-getpshared.c: Likewise. * sysdeps/htl/pt-mutexattr-gettype.c: Likewise. * sysdeps/htl/pt-mutexattr-init.c: Likewise. * sysdeps/htl/pt-mutexattr-setprioceiling.c: Likewise. * sysdeps/htl/pt-mutexattr-setprotocol.c: Likewise. * sysdeps/htl/pt-mutexattr-setpshared.c: Likewise. * sysdeps/htl/pt-mutexattr-settype.c: Likewise. * sysdeps/htl/pt-mutexattr.c: Likewise. * sysdeps/htl/pt-once.c: Likewise. * sysdeps/htl/pt-rwlock-attr.c: Likewise. * sysdeps/htl/pt-rwlock-destroy.c: Likewise. * sysdeps/htl/pt-rwlock-init.c: Likewise. * sysdeps/htl/pt-rwlock-rdlock.c: Likewise. * sysdeps/htl/pt-rwlock-timedrdlock.c: Likewise. * sysdeps/htl/pt-rwlock-timedwrlock.c: Likewise. * sysdeps/htl/pt-rwlock-tryrdlock.c: Likewise. * sysdeps/htl/pt-rwlock-trywrlock.c: Likewise. * sysdeps/htl/pt-rwlock-unlock.c: Likewise. * sysdeps/htl/pt-rwlock-wrlock.c: Likewise. * sysdeps/htl/pt-rwlockattr-destroy.c: Likewise. * sysdeps/htl/pt-rwlockattr-getpshared.c: Likewise. * sysdeps/htl/pt-rwlockattr-init.c: Likewise. * sysdeps/htl/pt-rwlockattr-setpshared.c: Likewise. * sysdeps/htl/pt-setconcurrency.c: Likewise. * sysdeps/htl/pt-setschedparam.c: Likewise. * sysdeps/htl/pt-setschedprio.c: Likewise. * sysdeps/htl/pt-setspecific.c: Likewise. * sysdeps/htl/pt-spin.c: Likewise. * sysdeps/htl/pt-startup.c: Likewise. * sysdeps/htl/pthread.h: Likewise. * sysdeps/htl/sem-close.c: Likewise. * sysdeps/htl/sem-destroy.c: Likewise. * sysdeps/htl/sem-getvalue.c: Likewise. * sysdeps/htl/sem-init.c: Likewise. * sysdeps/htl/sem-open.c: Likewise. * sysdeps/htl/sem-post.c: Likewise. * sysdeps/htl/sem-timedwait.c: Likewise. * sysdeps/htl/sem-trywait.c: Likewise. * sysdeps/htl/sem-unlink.c: Likewise. * sysdeps/htl/sem-wait.c: Likewise. * sysdeps/hurd/htl/pt-kill.c: Likewise. * sysdeps/i386/htl/pt-machdep.h: Likewise. * sysdeps/mach/htl/pt-block.c: Likewise. * sysdeps/mach/htl/pt-spin.c: Likewise. * sysdeps/mach/htl/pt-stack-alloc.c: Likewise. * sysdeps/mach/htl/pt-thread-alloc.c: Likewise. * sysdeps/mach/htl/pt-thread-start.c: Likewise. * sysdeps/mach/htl/pt-thread-terminate.c: Likewise. * sysdeps/mach/htl/pt-timedblock.c: Likewise. * sysdeps/mach/htl/pt-wakeup.c: Likewise. * sysdeps/mach/hurd/htl/bits/pthread-np.h: Likewise. * sysdeps/mach/hurd/htl/bits/types/struct___pthread_mutex.h: Likewise. * sysdeps/mach/hurd/htl/pt-attr-setstackaddr.c: Likewise. * sysdeps/mach/hurd/htl/pt-attr-setstacksize.c: Likewise. * sysdeps/mach/hurd/htl/pt-docancel.c: Likewise. * sysdeps/mach/hurd/htl/pt-hurd-cond-timedwait.c: Likewise. * sysdeps/mach/hurd/htl/pt-hurd-cond-wait.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-consistent.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-destroy.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-getprioceiling.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-init.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-lock.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-setprioceiling.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-timedlock.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-transfer-np.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-trylock.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex-unlock.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutex.h: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-destroy.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-getprioceiling.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-getprotocol.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-getpshared.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-getrobust.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-gettype.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-init.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-setprioceiling.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-setprotocol.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-setpshared.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-setrobust.c: Likewise. * sysdeps/mach/hurd/htl/pt-mutexattr-settype.c: Likewise. * sysdeps/mach/hurd/htl/pt-sigstate-destroy.c: Likewise. * sysdeps/mach/hurd/htl/pt-sigstate-init.c: Likewise. * sysdeps/mach/hurd/htl/pt-sigstate.c: Likewise. * sysdeps/mach/hurd/htl/pt-sysdep.c: Likewise. * sysdeps/mach/hurd/htl/pt-sysdep.h: Likewise. * sysdeps/mach/hurd/i386/htl/pt-machdep.c: Likewise. * sysdeps/mach/hurd/i386/htl/pt-setup.c: Likewise. |
||
|
Samuel Thibault
|
33574c17ee |
hurd: Add hurd thread library
Contributed by Agustina Arzille <avarzille@riseup.net> Amos Jeffries <squid3@treenet.co.nz> David Michael <fedora.dm0@gmail.com> Marco Gerards <marco@gnu.org> Marcus Brinkmann <marcus@gnu.org> Neal H. Walfield <neal@gnu.org> Pino Toscano <toscano.pino@tiscali.it> Richard Braun <rbraun@sceen.net> Roland McGrath <roland@gnu.org> Samuel Thibault <samuel.thibault@ens-lyon.org> Thomas DiModica <ricinwich@yahoo.com> Thomas Schwinge <tschwinge@gnu.org> * htl: New directory. * sysdeps/htl: New directory. * sysdeps/hurd/htl: New directory. * sysdeps/i386/htl: New directory. * sysdeps/mach/htl: New directory. * sysdeps/mach/hurd/htl: New directory. * sysdeps/mach/hurd/i386/htl: New directory. * nscd/Depend, resolv/Depend, rt/Depend: Add htl dependency. * sysdeps/mach/hurd/i386/Implies: Add mach/hurd/i386/htl imply. * sysdeps/mach/hurd/i386/libpthread.abilist: New file. |
||
Andrew Senkevich
|
cd66c0e584 |
Fix i386 memmove issue (bug 22644).
[BZ #22644] * sysdeps/i386/i686/multiarch/memcpy-sse2-unaligned.S: Fixed branch conditions. * string/test-memmove.c (do_test2): New testcase. |
||
Joseph Myers
|
8d3f9e85cf |
Add narrowing subtract functions.
This patch adds the narrowing subtract functions from TS 18661-1 to glibc's libm: fsub, fsubl, dsubl, f32subf64, f32subf32x, f32xsubf64 for all configurations; f32subf64x, f32subf128, f64subf64x, f64subf128, f32xsubf64x, f32xsubf128, f64xsubf128 for configurations with _Float64x and _Float128; __nldbl_dsubl for ldbl-opt. The changes are essentially the same as for the narrowing add functions, so the description of those generally applies to this patch as well. Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft float) and powerpc, and with build-many-glibcs.py. * math/Makefile (libm-narrow-fns): Add sub. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing subtract functions. * math/bits/mathcalls-narrow.h (sub): Use __MATHCALL_NARROW. * math/gen-auto-libm-tests.c (test_functions): Add sub. * math/math-narrow.h (CHECK_NARROW_SUB): New macro. (NARROW_SUB_ROUND_TO_ODD): Likewise. (NARROW_SUB_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__fsubl): New macro. (__dsubl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fsub and dsub. (CFLAGS-nldbl-dsub.c): New variable. (CFLAGS-nldbl-fsub.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_dsubl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_dsubl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fsub, fsubl, dsubl, fMsubfN, fMsubfNx, fMxsubfN and fMxsubfNx. * math/auto-libm-test-in: Add tests of sub. * math/auto-libm-test-out-narrow-sub: New generated file. * math/libm-test-narrow-sub.inc: New file. * sysdeps/i386/fpu/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xsubf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fsub.c: Likewise. * sysdeps/ieee754/float128/s_f32subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64subf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xsubf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_dsubl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fsubl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dsub.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_dsubl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsub.c: Likewise. * sysdeps/ieee754/soft-fp/s_fsubl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
34ba96b89c |
Update i386 libm-test-ulps.
I found the i386 libm-test-ulps files needed updating (probably the sqrt changes perturbed exactly when excess precision was used by the compiler). * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
||
Wilco Dijkstra
|
1294b1892e |
Add support for sqrt asm redirects
This patch series cleans up the many uses of __ieee754_sqrt(f/l) in GLIBC. The goal is to enable GCC to do the inlining, and if this fails call the __ieee754_sqrt function. This is done by internally declaring sqrt with asm redirects. The compat symbols and sqrt wrappers need to disable the redirect. The redirect is also disabled if there are already redirects defined when using -ffinite-math-only. All math functions (but not math tests, non-library code and libnldbl) are built with -fno-math-errno which means GCC will typically inline sqrt as a single instruction. This means targets are no longer forced to add a special inline for sqrt. * include/math.h (sqrt): Declare with asm redirect. (sqrtf): Likewise. (sqrtl): Likewise. (sqrtf128): Likewise. * Makeconfig: Add -fno-math-errno for libc/libm, but build testsuite, nonlib and libnldbl with -fmath-errno. * math/w_sqrt_compat.c: Define NO_MATH_REDIRECT. * math/w_sqrt_template.c: Likewise. * math/w_sqrtf_compat.c: Likewise. * math/w_sqrtl_compat.c: Likewise. * sysdeps/i386/fpu/w_sqrt.c: Likewise. * sysdeps/i386/fpu/w_sqrt_compat.c: Likewise. * sysdeps/generic/math-type-macros-float128.h: Remove math.h and complex.h. |
||
|
Samuel Thibault
|
a5df0318ef |
hurd: add gscope support
* elf/dl-support.c [!THREAD_GSCOPE_IN_TCB] (_dl_thread_gscope_count): Define variable. * sysdeps/generic/ldsodefs.h [!THREAD_GSCOPE_IN_TCB] (struct rtld_global): Add _dl_thread_gscope_count member. * sysdeps/mach/hurd/tls.h: Include <atomic.h>. [!defined __ASSEMBLER__] (THREAD_GSCOPE_GLOBAL, THREAD_GSCOPE_SET_FLAG, THREAD_GSCOPE_RESET_FLAG, THREAD_GSCOPE_WAIT): Define macros. * sysdeps/generic/tls.h: Document THREAD_GSCOPE_IN_TCB. * sysdeps/aarch64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/alpha/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/arm/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/hppa/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/i386/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/ia64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/m68k/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/microblaze/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/mips/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/nios2/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/powerpc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/riscv/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/s390/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/sh/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/sparc/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/tile/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. * sysdeps/x86_64/nptl/tls.h: Define THREAD_GSCOPE_IN_TCB to 1. |
||
|
Joseph Myers
|
e2bcf6a855 |
Fix i386 fenv_private.h float128 for 32-bit --with-fpmath=sse (bug 22902).
As discussed in bug 22902, the i386 fenv_private.h implementation has problems for float128 for the case of 32-bit glibc built with libgcc from GCC configured using --with-fpmath=sse. The optimized floating-point state handling in fenv_private.h needs to know which floating-point state - x87 or SSE - is used for each floating-point type, so that only one state needs updating / testing for libm code using that state internally. On 32-bit x86, the x87 rounding mode is always used for float128, but the x87 exception flags are only used when libgcc is built using x87 floating-point arithmetic; if libgcc is built for SSE arithmetic, the SSE exception flags are used. The choice of arithmetic with which libgcc is built is independent of that with which glibc is built. Thus, since glibc cannot tell the choice used in libgcc, the default implementations of libc_feholdexcept_setroundf128 and libc_feupdateenv_testf128 (which use the <fenv.h> functions, thus using both x87 and SSE state on processors that have both) need to be used; this patch updates the code accordingly. Tested for 32-bit x86; HJ reports testing in the --with-fpmath=sse case. [BZ #22902] * sysdeps/i386/fpu/fenv_private.h [!__x86_64__] (libc_feholdexcept_setroundf128): New macro. [!__x86_64__] (libc_feupdateenv_testf128): Likewise. |
||
|
Wilco Dijkstra
|
610ee1fc93 |
Remove mplog and mpexp
Remove the now unused mplog and mpexp files. * math/Makefile: Remove mpexp.c and mplog.c * sysdeps/i386/fpu/mpexp.c: Delete file. * sysdeps/i386/fpu/mplog.c: Likewise. * sysdeps/ia64/fpu/mpexp.c: Likewise. * sysdeps/ia64/fpu/mplog.c: Likewise. * sysdeps/ieee754/dbl-64/e_exp.c: Remove mention of mpexp and mplog. * sysdeps/ieee754/dbl-64/mpa.h (__pow_mp): Remove unused function. * sysdeps/ieee754/dbl-64/mpexp.c: Delete file. * sysdeps/ieee754/dbl-64/mplog.c: Likewise. * sysdeps/m68k/m680x0/fpu/mpexp.c: Likewise. * sysdeps/m68k/m680x0/fpu/mplog.c: Likewise. * sysdeps/x86_64/fpu/multiarch/Makefile: Remove mpexp* and mplog*. * sysdeps/x86_64/fpu/multiarch/e_log-avx.c: Remove unused defines. * sysdeps/x86_64/fpu/multiarch/e_log-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/e_log-fma4.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mpexp-avx.c: Delete file. * sysdeps/x86_64/fpu/multiarch/mpexp-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mpexp-fma4.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mplog-avx.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mplog-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/mplog-fma4.c: Likewise. |
||
Szabolcs Nagy
|
de800d8305 |
Remove slow paths from exp
Remove the __slowexp code, so exp is no longer correctly rounded. The result is computed to about 70 bits precision so the worst case ulp error is about 0.500007 in nearest rounding mode. * manual/probes.texi: Remove slowexp probes. * math/Makefile: Remove slowexp. * sysdeps/generic/math_private.h (__slowexp): Remove. * sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Remove __slowexp and document error bounds. * sysdeps/i386/fpu/slowexp.c: Remove. * sysdeps/ia64/fpu/slowexp.c: Remove. * sysdeps/ieee754/dbl-64/slowexp.c: Remove. * sysdeps/ieee754/dbl-64/uexp.h (err_0): Remove. * sysdeps/m68k/m680x0/fpu/slowexp.c: Remove. * sysdeps/powerpc/power4/fpu/Makefile (CPPFLAGS-slowexp.c): Remove. * sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowexp-fma. * sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Remove. * sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Remove. * sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Remove. * sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Remove. * sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Remove. * sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Remove. |
||
|
Wilco Dijkstra
|
c3d466cba1 |
Remove slow paths from pow
Remove the slow paths from pow. Like several other double precision math functions, pow is exactly rounded. This is not required from math functions and causes major overheads as it requires multiple fallbacks using higher precision arithmetic if a result is close to 0.5ULP. Ridiculous slowdowns of up to 100000x have been reported when the highest precision path triggers. All GLIBC math tests pass on AArch64 and x64 (with ULP of pow set to 1). The worst case error is ~0.506ULP. A simple test over a few hundred million values shows pow is 10% faster on average. This fixes BZ #13932. [BZ #13932] * sysdeps/ieee754/dbl-64/uexp.h (err_1): Remove. * benchtests/pow-inputs: Update comment for slow path cases. * manual/probes.texi (slowpow_p10): Delete removed probe. (slowpow_p10): Likewise. * math/Makefile: Remove halfulp.c and slowpow.c. * sysdeps/aarch64/libm-test-ulps: Set ULP of pow to 1. * sysdeps/generic/math_private.h (__exp1): Remove error argument. (__halfulp): Remove. (__slowpow): Remove. * sysdeps/i386/fpu/halfulp.c: Delete file. * sysdeps/i386/fpu/slowpow.c: Likewise. * sysdeps/ia64/fpu/halfulp.c: Likewise. * sysdeps/ia64/fpu/slowpow.c: Likewise. * sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove error argument, improve comments and add error analysis. * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Add error analysis. (power1): Remove function: (log1): Remove error argument, add error analysis. (my_log2): Remove function. * sysdeps/ieee754/dbl-64/halfulp.c: Delete file. * sysdeps/ieee754/dbl-64/slowpow.c: Likewise. * sysdeps/m68k/m680x0/fpu/halfulp.c: Likewise. * sysdeps/m68k/m680x0/fpu/slowpow.c: Likewise. * sysdeps/powerpc/power4/fpu/Makefile: Remove CPPFLAGS-slowpow.c. * sysdeps/x86_64/fpu/libm-test-ulps: Set ULP of pow to 1. * sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowpow-fma.c, slowpow-fma4.c, halfulp-fma.c, halfulp-fma4.c. * sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__slowpow): Remove define. * sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__slowpow): Likewise. * sysdeps/x86_64/fpu/multiarch/halfulp-fma.c: Delete file. * sysdeps/x86_64/fpu/multiarch/halfulp-fma4.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowpow-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowpow-fma4.c: Likewise. |
||
|
Joseph Myers
|
d8742dd82f |
Add narrowing add functions.
This patch adds the narrowing add functions from TS 18661-1 to glibc's libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all configurations; f32addf64x, f32addf128, f64addf64x, f64addf128, f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with _Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for the build infrastructure patch, tgmath.h support is deliberately deferred, and FP_FAST_* macros are not applicable without optimized function implementations. Function implementations are added for all relevant pairs of formats (including certain cases of a format and itself where more than one type has that format). The main implementations use round-to-odd, or a trivial computation in the case where both formats are the same or where the wider format is IBM long double (in which case we don't attempt to be correctly rounding). The sysdeps/ieee754/soft-fp implementations use soft-fp, and are used automatically for configurations without exceptions and rounding modes by virtue of existing Implies files. As previously discussed, optimized versions for particular architectures are possible, but not included. i386 gets a special version of f32xaddf64 to avoid problems with double rounding (similar to the existing fdim version), since this function must round just once without an intermediate rounding to long double. (No such special version is needed for any other function, because the nontrivial functions use round-to-odd, which does the intermediate computation with the rounding mode set to round-to-zero, and double rounding is OK except in round-to-nearest mode, so is OK for that intermediate round-to-zero computation.) mul and div will need slightly different special versions for i386 (using round-to-odd on long double instead of precision control) because of the possibility of inexact intermediate results in the subnormal range for double. To reduce duplication among the different function implementations, math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD and NARROW_ADD_TRIVIAL. In the trivial cases and for any architecture-specific optimized implementations, the overhead of the errno setting might be significant, but I think that's best handled through compiler built-in functions rather than providing separate no-errno versions in glibc (and likewise there are no __*_finite entry points for these function provided, __*_finite effectively being no-errno versions at present in most cases). Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for mips64 (all three ABIs, both hard and soft float) and powerpc with GCC 7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7. * math/Makefile (libm-narrow-fns): Add add. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing add functions. * math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW . * math/gen-auto-libm-tests.c (test_functions): Add add. * math/math-narrow.h (CHECK_NARROW_ADD): New macro. (NARROW_ADD_ROUND_TO_ODD): Likewise. (NARROW_ADD_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__faddl): New macro. (__daddl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and dadd. (CFLAGS-nldbl-dadd.c): New variable. (CFLAGS-nldbl-fadd.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_daddl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl, daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx. * math/auto-libm-test-in: Add tests of add. * math/auto-libm-test-out-narrow-add: New generated file. * math/libm-test-narrow-add.inc: New file. * sysdeps/i386/fpu/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fadd.c: Likewise. * sysdeps/ieee754/float128/s_f32addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_daddl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_faddl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
||
|
Joseph Myers
|
63716ab270 |
Add build infrastructure for narrowing libm functions.
TS 18661-1 defines libm functions that carry out an operation (+ - * / sqrt fma) on their arguments and return a result rounded to a (usually) narrower type, as if the original result were computed to infinite precision and then rounded directly to the result type without any intermediate rounding to the argument type. For example, fadd, faddl and daddl for addition. These are the last remaining TS 18661-1 functions left to be added to glibc. TS 18661-3 extends this to corresponding functions for _FloatN and _FloatNx types. As functions parametrized by two rather than one varying floating-point types, these functions require infrastructure in glibc that was not required for previous libm functions. This patch provides such infrastructure - excluding test support, and actual function implementations, which will be in subsequent patches. Declaring the functions uses a header bits/mathcalls-narrow.h, which is included many times, for each relevant pair of types. This will end up containing macro calls of the form __MATHCALL_NARROW (__MATHCALL_NAME (add), __MATHCALL_REDIR_NAME (add), 2); for each family of narrowing functions. (The structure of this macro call, with the calls to __MATHCALL_NAME and __MATHCALL_REDIR_NAME there rather than in the definition of __MATHCALL_NARROW, arises from the names such as "add" *not* themselves being reserved identifiers - meaning it's necessary to avoid any indirection that would result in a user-defined "add" macro being expanded.) Whereas for existing functions declaring long double functions is disabled if _LIBC in the case where they alias double functions, to facilitate defining the long double functions as aliases of the double ones, there is no such logic for the narrowing functions in this patch. Rather, the files defining such functions are expected to use #define to hide the original declarations of the alias names, to avoid errors about defining aliases with incompatible types. math/Makefile support is added for building the functions (listed in libm-narrow-fns, currently empty) for all relevant pairs of types. An internal header math-narrow.h is added for macros shared between multiple function implementations - currently a ROUND_TO_ODD macro to facilitate writing functions using the round-to-odd implementation approach, and alias macros to create all the required function aliases. libc_feholdexcept_setroundf128 and libc_feupdateenv_testf128 are added for use when required (only for x86_64). float128_private.h support is added for ldbl-128 narrowing functions to be used for _Float128. Certain things are specifically omitted from this patch and the immediate followups. tgmath.h support is deferred; there remain unresolved questions about how the type-generic macros for these functions are supposed to work, especially in the case of arguments of integer type. The math.h / bits/mathcalls-narrow.h logic, and the logic for determining what functions / aliases to define, will need some adjustments to support the sqrt and fma functions, where e.g. f32xsqrtf64 can just be an alias for sqrt rather than a separate function. TS 18661-1 defines FP_FAST_* macros but no support is included for defining them (they won't in general be true without architecture-specific optimized function versions). For each of the function groups (add sub mul div sqrt fma) there are always six functions present (e.g. fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64). When _Float64x and _Float128 are supported, there are seven more (e.g. f32addf64x, f32addf128, f64addf64x, f64addf128, f32xaddf64x, f32xaddf128, f64xaddf128). In addition, in the ldbl-opt case there are function names such as __nldbl_daddl (an alias for f32xaddf64, which is not a reserved name in TS 18661-1, only in TS 18661-3), for calls to daddl to be mapped to in the -mlong-double-64 case. (Calls to faddl just get mapped to fadd, and for sqrt and fma there won't be __nldbl_* functions because dsqrtl and dfmal can just be mapped to sqrt and fma with -mlong-double-64.) While there are six or thirteen functions present in each group (plus __nldbl_* names only as an ABI, not an API), not all are distinct; they fall in various groups of aliases. There are two distinct versions built if long double has the same format as double; four if they have distinct formats but there is no _Float64x or _Float128 support; five if long double has binary128 format; seven when _Float128 is distinct from long double. Architecture-specific optimized versions are possible, but not included in my patches. For example, IA64 generally supports narrowing the result of most floating-point instructions; Power ISA 2.07 (POWER8) supports double values as arguments to float instructions, with the results narrowed as expected; Power ISA 3 (POWER9) supports round-to-odd for float128 instructions, so meaning that approach can be used without needing to set and restore the rounding mode and test "inexact". I intend to leave any such optimized versions to the architecture maintainers. Generally in such cases it would also make sense for calls to these functions to be expanded inline (given -fno-math-errno); I put a suggestion for TS 18661-1 built-in functions at <https://gcc.gnu.org/wiki/SummerOfCode>. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with further patches). * math/bits/mathcalls-narrow.h: New file. * include/bits/mathcalls-narrow.h: Likewise. * math/math-narrow.h: Likewise. * math/math.h (__MATHCALL_NARROW_ARGS_1): New macro. (__MATHCALL_NARROW_ARGS_2): Likewise. (__MATHCALL_NARROW_ARGS_3): Likewise. (__MATHCALL_NARROW_NORMAL): Likewise. (__MATHCALL_NARROW_REDIR): Likewise. (__MATHCALL_NARROW): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)]: Repeatedly include <bits/mathcalls-narrow.h> with _Mret_, _Marg_ and __MATHCALL_NAME defined. [__GLIBC_USE (IEC_60559_TYPES_EXT)]: Likewise. * math/Makefile (headers): Add bits/mathcalls-narrow.h. (libm-narrow-fns): New variable. (libm-narrow-types-basic): Likewise. (libm-narrow-types-ldouble-yes): Likewise. (libm-narrow-types-float128-yes): Likewise. (libm-narrow-types-float128-alias-yes): Likewise. (libm-narrow-types): Likewise. (libm-routines): Add narrowing functions. * sysdeps/i386/fpu/fenv_private.h [__x86_64__] (libc_feholdexcept_setroundf128): New macro. [__x86_64__] (libc_feupdateenv_testf128): Likewise. * sysdeps/ieee754/float128/float128_private.h: Include <math/math-narrow.h>. [libc_feholdexcept_setroundf128] (libc_feholdexcept_setroundl): Undefine and redefine. [libc_feupdateenv_testf128] (libc_feupdateenv_testl): Likewise. (libm_alias_float_ldouble): Undefine and redefine. (libm_alias_double_ldouble): Likewise. |
||
H.J. Lu
|
f886c16ca5 |
i386: Use __glibc_likely/__glibc_likely in dl-machine.h
The differences in elf/dl-reloc.os are --- before 2018-02-05 03:53:31.970492246 -0800 +++ after 2018-02-05 03:53:49.719902340 -0800 @@ -1202,9 +1202,9 @@ _dl_relocate_object: movl -60(%ebp), %eax testl %eax, %eax je .L249 - movl 8(%eax), %eax - movl 8(%ebx), %esi - cmpl %esi, %eax + movl 8(%eax), %esi + movl 8(%ebx), %eax + cmpl %eax, %esi ja .L284 jb .L707 .L285: @@ -2255,7 +2255,7 @@ _dl_relocate_object: cmpl $6, %edi movl $4, %edx je .L132 - cmpl %ecx, %eax + cmpl %eax, %ecx je .L350 cmpl $7, %edi je .L419 @@ -2735,7 +2735,7 @@ _dl_relocate_object: je .L120 .L121: movl -96(%ebp), %edx - movl $640, 8(%esp) + movl $639, 8(%esp) leal __PRETTY_FUNCTION__.9431@GOTOFF(%edx), %eax movl %eax, 12(%esp) leal .LC9@GOTOFF(%edx), %eax @@ -3454,10 +3454,10 @@ _dl_relocate_object: movl -152(%ebp), %eax movl %eax, 4(%esp) call _dl_dprintf - movl -60(%ebp), %eax - movl 8(%ebx), %esi + movl 8(%ebx), %eax + movl -60(%ebp), %ebx movl -112(%ebp), %edx - movl 8(%eax), %eax + movl 8(%ebx), %esi jmp .L285 .L713: movl %esi, (%esp) * sysdeps/i386/dl-machine.h (elf_machine_rel): Replace __builtin_expect with __glibc_likely and __glibc_unlikely. (elf_machine_rela): Likewise. (elf_machine_lazy_rel): Likewise. |
||
Carlos O'Donell
|
2ec0e7eade |
Revert Intel CET changes to __jmp_buf_tag (Bug 22743)
In commit |
||
|
Samuel Thibault
|
107a35a575 |
i386: Regenerate libm-test-ulps for for gcc 7 on i686
* sysdeps/i386/fpu/libm-test-ulps: Regenerated for GCC 7 with "-O2 -march=i686". |
||
|
Samuel Thibault
|
4a5ce6e908 |
hurd: Fix build without NO_HIDDEN
* sysdeps/i386/dl-tlsdesc.S (_dl_tlsdesc_dynamic) [NO_RTLD_HIDDEN]: Call JUMPTARGET (___tls_get_addr) instead of HIDDEN_JUMPTARGET (___tls_get_addr). * sysdeps/x86_64/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Likewise. |
||
|
Joseph Myers
|
688903eb3e |
Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise. |
||
|
Joseph Myers
|
f1e005022e |
Revert exp reimplementation (causes test failures).
Revert: 2017-12-19 Joseph Myers <joseph@codesourcery.com> * sysdeps/x86_64/fpu/libm-test-ulps: Update. 2017-12-19 Patrick McGehearty <patrick.mcgehearty@oracle.com> * sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and <errno.h>. Include "eexp.tbl". (half): New constant. (one): Likewise. (__ieee754_exp): Rewrite. (__slowexp): Remove prototype. * sysdeps/ieee754/dbl-64/eexp.tbl: New file. * sysdeps/ieee754/dbl-64/slowexp.c: Remove file. * sysdeps/i386/fpu/slowexp.c: Likewise. * sysdeps/ia64/fpu/slowexp.c: Likewise. * sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise. * sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise. * sysdeps/generic/math_private.h (__slowexp): Remove prototype. * sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in comment. * sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math] (CPPFLAGS-slowexp.c): Remove variable. * sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines): Remove slowexp-fma, slowexp-fma4 and slowexp-avx. (CFLAGS-slowexp-fma.c): Remove variable. (CFLAGS-slowexp-fma4.c): Likewise. (CFLAGS-slowexp-avx.c): Likewise. * sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not define as macro. * sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise. * sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise. * math/Makefile (type-double-routines): Remove slowexp. * manual/probes.texi (slowexp_p6): Remove. (slowexp_p32): Likewise. |
||
Patrick McGehearty
|
6fd0a3c6a8 |
Improve __ieee754_exp() performance by greater than 5x on sparc/x86.
These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.
Typical performance gains is typically around 5x when measured on
Sparc s7 for common values between exp(1) and exp(40).
Using the glibc perf tests on sparc,
sparc (nsec) x86 (nsec)
old new old new
max 17629 395 5173 144
min 399 54 15 13
mean 5317 200 1349 23
The extreme max times for the old (ieee754) exp are due to the
multiprecision computation in the old algorithm when the true value is
very near 0.5 ulp away from an value representable in double
precision. The new algorithm does not take special measures for those
cases. The current glibc exp perf tests overrepresent those values.
Informal testing suggests approximately one in 200 cases might
invoke the high cost computation. The performance advantage of the new
algorithm for other values is still large but not as large as indicated
by the chart above.
Glibc correctness tests for exp() and expf() were run. Within the
test suite 3 input values were found to cause 1 bit differences (ulp)
when "FE_TONEAREST" rounding mode is set. No differences in exp() were
seen for the tested values for the other rounding modes.
Typical example:
exp(-0x1.760cd2p+0) (-1.46113312244415283203125)
new code: 2.31973271630014299393707e-01 0x1.db14cd799387ap-3
old code: 2.31973271630014271638132e-01 0x1.db14cd7993879p-3
exp = 2.31973271630014285508337 (high precision)
Old delta: off by 0.49 ulp
New delta: off by 0.51 ulp
In addition, because ieee754_exp() is used by other routines, cexp()
showed test results with very small imaginary input values where the
imaginary portion of the result was off by 3 ulp when in upward
rounding mode, but not in the other rounding modes. For x86, tgamma
showed a few values where the ulp increased to 6 (max ulp for tgamma
is 5). Sparc tgamma did not show these failures. I presume the tgamma
differences are due to compiler optimization differences within the
gamma function.The gamma function is known to be difficult to compute
accurately.
* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
<errno.h>. Include "eexp.tbl".
(half): New constant.
(one): Likewise.
(__ieee754_exp): Rewrite.
(__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
* sysdeps/i386/fpu/slowexp.c: Likewise.
* sysdeps/ia64/fpu/slowexp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
comment.
* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
(CPPFLAGS-slowexp.c): Remove variable.
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
(CFLAGS-slowexp-fma.c): Remove variable.
(CFLAGS-slowexp-fma4.c): Likewise.
(CFLAGS-slowexp-avx.c): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
define as macro.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
* math/Makefile (type-double-routines): Remove slowexp.
* manual/probes.texi (slowexp_p6): Remove.
(slowexp_p32): Likewise.
|
||
|
H.J. Lu
|
cba595c350 |
x86: Add feature_1 to tcbhead_t [BZ #22563]
On x86, padding in struct __jmp_buf_tag is used for shadow stack pointer to support Shadow Stack in Intel Control-flow Enforcemen Technology. cancel_jmp_buf has been updated to include saved_mask so that it is as large as struct __jmp_buf_tag. We must suport the old cancel_jmp_buf in existing binaries. Since symbol versioning doesn't work on cancel_jmp_buf, feature_1 is added to tcbhead_t so that setjmp and longjmp can check if shadow stack is enabled. NB: Shadow stack is enabled only if all modules are shadow stack enabled. [BZ #22563] * sysdeps/i386/nptl/tcb-offsets.sym (FEATURE_1_OFFSET): New. * sysdeps/i386/nptl/tls.h (tcbhead_t): Add feature_1. * sysdeps/x86_64/nptl/tcb-offsets.sym (FEATURE_1_OFFSET): New. * sysdeps/x86_64/nptl/tls.h (tcbhead_t): Rename __glibc_unused1 to feature_1. |
||
|
H.J. Lu
|
9d7a3741c9 |
Add --enable-static-pie configure option to build static PIE [BZ #19574]
Static PIE extends address space layout randomization to static executables. It provides additional security hardening benefits at the cost of some memory and performance. Dynamic linker, ld.so, is a standalone program which can be loaded at any address. This patch adds a configure option, --enable-static-pie, to embed the part of ld.so in static executable to create static position independent executable (static PIE). A static PIE is similar to static executable, but can be loaded at any address without help from a dynamic linker. When --enable-static-pie is used to configure glibc, libc.a is built as PIE and all static executables, including tests, are built as static PIE. The resulting libc.a can be used together with GCC 8 or above to build static PIE with the compiler option, -static-pie. But GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC with PIE support is needed. When an older GCC is used to build glibc with --enable-static-pie, proper input files are passed to linker to create static executables as static PIE, together with "-z text" to prevent dynamic relocations in read-only segments, which are not allowed in static PIE. The following changes are made for static PIE: 1. Add a new function, _dl_relocate_static_pie, to: a. Get the run-time load address. b. Read the dynamic section. c. Perform dynamic relocations. Dynamic linker also performs these steps. But static PIE doesn't load any shared objects. 2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in libc.a. crt1.o, which is used to create dynamic and non-PIE static executables, is updated to include a dummy _dl_relocate_static_pie. rcrt1.o is added to create static PIE, which will link in the real _dl_relocate_static_pie. grcrt1.o is also added to create static PIE with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for static PIE. Static PIE can work on all architectures which support PIE, provided: 1. Target must support accessing of local functions without dynamic relocations, which is needed in start.S to call __libc_start_main with function addresses of __libc_csu_init, __libc_csu_fini and main. All functions in static PIE are local functions. If PIE start.S can't reach main () defined in a shared object, the code sequence: pass address of local_main to __libc_start_main ... local_main: tail call to main via PLT can be used. 2. start.S is updated to check PIC instead SHARED for PIC code path and avoid dynamic relocation, when PIC is defined and SHARED isn't defined, to support static PIE. 3. All assembly codes are updated check PIC instead SHARED for PIC code path to avoid dynamic relocations in read-only sections. 4. All assembly codes are updated check SHARED instead PIC for static symbol name. 5. elf_machine_load_address in dl-machine.h are updated to support static PIE. 6. __brk works without TLS nor dynamic relocations in read-only section so that it can be used by __libc_setup_tls to initializes TLS in static PIE. NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled with -fPIE, regardless if --enable-static-pie is used to configure glibc. When glibc is configured with --enable-static-pie, libc.a is compiled with -fPIE, regardless whether GCC defaults to PIE or not. The same libc.a can be used to build both static executable and static PIE. There is no need for separate PIE copy of libc.a. On x86-64, the normal static sln: text data bss dec hex filename 625425 8284 5456 639165 9c0bd elf/sln the static PIE sln: text data bss dec hex filename 657626 20636 5392 683654 a6e86 elf/sln The code size is increased by 5% and the binary size is increased by 7%. Linker requirements to build glibc with --enable-static-pie: 1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from static PIE. 2. Linker can create working static PIE. The x86-64 linker needs the fix for https://sourceware.org/bugzilla/show_bug.cgi?id=21782 The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax" to "leal main@GOTOFF(%ebx), %eax" if main is defined locally. Binutils 2.29 or above are OK for i686 and x86-64. But linker status for other targets need to be verified. 3. Linker should resolve undefined weak symbols to 0 in static PIE: https://sourceware.org/bugzilla/show_bug.cgi?id=22269 4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS relocations, which should check bfd_link_executable instead: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Tested on aarch64, i686 and x86-64. Using GCC 7 and binutils master branch, build-many-glibcs.py with --enable-static-pie with all patches for static PIE applied have the following build successes: PASS: glibcs-aarch64_be-linux-gnu build PASS: glibcs-aarch64-linux-gnu build PASS: glibcs-armeb-linux-gnueabi-be8 build PASS: glibcs-armeb-linux-gnueabi build PASS: glibcs-armeb-linux-gnueabihf-be8 build PASS: glibcs-armeb-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabi build PASS: glibcs-arm-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabihf-v7a build PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build PASS: glibcs-m68k-linux-gnu build PASS: glibcs-microblazeel-linux-gnu build PASS: glibcs-microblaze-linux-gnu build PASS: glibcs-mips64el-linux-gnu-n32 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n32-soft build PASS: glibcs-mips64el-linux-gnu-n64 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n64-soft build PASS: glibcs-mips64-linux-gnu-n32 build PASS: glibcs-mips64-linux-gnu-n32-nan2008 build PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n32-soft build PASS: glibcs-mips64-linux-gnu-n64 build PASS: glibcs-mips64-linux-gnu-n64-nan2008 build PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n64-soft build PASS: glibcs-mipsel-linux-gnu build PASS: glibcs-mipsel-linux-gnu-nan2008 build PASS: glibcs-mipsel-linux-gnu-nan2008-soft build PASS: glibcs-mipsel-linux-gnu-soft build PASS: glibcs-mips-linux-gnu build PASS: glibcs-mips-linux-gnu-nan2008 build PASS: glibcs-mips-linux-gnu-nan2008-soft build PASS: glibcs-mips-linux-gnu-soft build PASS: glibcs-nios2-linux-gnu build PASS: glibcs-powerpc64le-linux-gnu build PASS: glibcs-powerpc64-linux-gnu build PASS: glibcs-tilegxbe-linux-gnu-32 build PASS: glibcs-tilegxbe-linux-gnu build PASS: glibcs-tilegx-linux-gnu-32 build PASS: glibcs-tilegx-linux-gnu build PASS: glibcs-tilepro-linux-gnu build and the following build failures: FAIL: glibcs-alpha-linux-gnu build elf/sln is failed to link due to: assertion fail bfd/elf64-alpha.c:4125 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-hppa-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] https://sourceware.org/bugzilla/show_bug.cgi?id=22537 FAIL: glibcs-ia64-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] FAIL: glibcs-powerpc-linux-gnu build FAIL: glibcs-powerpc-linux-gnu-soft build FAIL: glibcs-powerpc-linux-gnuspe build FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22264 FAIL: glibcs-powerpc-linux-gnu-power4 build elf/sln is failed to link due to: findlocale.c:96:(.text+0x22c): @local call to ifunc memchr This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-s390-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped assertion fail bfd/elflink.c:14299 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-sh3eb-linux-gnu build FAIL: glibcs-sh3-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu-soft build FAIL: glibcs-sh4-linux-gnu build FAIL: glibcs-sh4-linux-gnu-soft build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS code sequence expected by ld: https://sourceware.org/bugzilla/show_bug.cgi?id=22270 FAIL: glibcs-sparc64-linux-gnu build FAIL: glibcs-sparcv9-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu-32 build FAIL: glibcs-tilegx-linux-gnu build FAIL: glibcs-tilegx-linux-gnu-32 build FAIL: glibcs-tilepro-linux-gnu build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 [BZ #19574] * INSTALL: Regenerated. * Makeconfig (real-static-start-installed-name): New. (pic-default): Updated for --enable-static-pie. (pie-default): New for --enable-static-pie. (default-pie-ldflag): Likewise. (+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F)) with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)). Replace $(static-start-installed-name) with $(real-static-start-installed-name). (+prectorT): Updated for --enable-static-pie. (+postctorT): Likewise. (CFLAGS-.o): Add $(pie-default). (CFLAGS-.op): Likewise. * NEWS: Mention --enable-static-pie. * config.h.in (ENABLE_STATIC_PIE): New. * configure.ac (--enable-static-pie): New configure option. (have-no-dynamic-linker): New LIBC_CONFIG_VAR. (have-static-pie): Likewise. Enable static PIE if linker supports --no-dynamic-linker. (ENABLE_STATIC_PIE): New AC_DEFINE. (enable-static-pie): New LIBC_CONFIG_VAR. * configure: Regenerated. * csu/Makefile (omit-deps): Add r$(start-installed-name) and gr$(start-installed-name) for --enable-static-pie. (extra-objs): Likewise. (install-lib): Likewise. (extra-objs): Add static-reloc.o and static-reloc.os ($(objpfx)$(start-installed-name)): Also depend on $(objpfx)static-reloc.o. ($(objpfx)r$(start-installed-name)): New. ($(objpfx)g$(start-installed-name)): Also depend on $(objpfx)static-reloc.os. ($(objpfx)gr$(start-installed-name)): New. * csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie in libc.a. * csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to initimage. * csu/static-reloc.c: New file. * elf/Makefile (routines): Add dl-reloc-static-pie. (elide-routines.os): Likewise. (DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed. (tst-tls1-static-non-pie-no-pie): New. * elf/dl-reloc-static-pie.c: New file. * elf/dl-support.c (_dl_get_dl_main_map): New function. * elf/dynamic-link.h (ELF_DURING_STARTUP): Also check STATIC_PIE_BOOTSTRAP. * elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise. * gmon/Makefile (tests): Add tst-gmon-static-pie. (tests-static): Likewise. (DEFAULT-LDFLAGS-tst-gmon-static): Removed. (tst-gmon-static-no-pie): New. (CFLAGS-tst-gmon-static-pie.c): Likewise. (CRT-tst-gmon-static-pie): Likewise. (tst-gmon-static-pie-ENV): Likewise. (tests-special): Likewise. ($(objpfx)tst-gmon-static-pie.out): Likewise. (clean-tst-gmon-static-pie-data): Likewise. ($(objpfx)tst-gmon-static-pie-gprof.out): Likewise. * gmon/tst-gmon-static-pie.c: New file. * manual/install.texi: Document --enable-static-pie. * sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New. (_dl_get_dl_main_map): Likewise. * sysdeps/i386/configure.ac: Check if linker supports static PIE. * sysdeps/x86_64/configure.ac: Likewise. * sysdeps/i386/configure: Regenerated. * sysdeps/x86_64/configure: Likewise. * sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default). (ASFLAGS-.op): Likewise. |
||
|
Joseph Myers
|
1f9055ce04 |
Add _Float32 function aliases.
This patch concludes filling out TS 18661-3 support for different types by adding *f32 function aliases of float functions to support _Float32. As with _Float64 and _Float32x, this is supported for all glibc configurations. As with the previous such patches there are some x86 ulps updates because of inline functions present for float but not for _Float32. The patch also has the usual bits/floatn-common.h update, symbol versions, ABI baselines updates, test enablement and documentation. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT32): Define to 1. * manual/math.texi (Mathematics): Document support for _Float32. * math/Makefile (test-types): Add float32. * math/Versions (GLIBC_2.27): Add _Float32 functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
||
|
Joseph Myers
|
0d93b7fd7c |
Add _Float64, _Float32x function aliases.
This patch continues filling out TS 18661-3 support by adding *f64 and *f32x function aliases, supporting _Float64 and _Float32x, as aliases for double functions. These types are supported for all glibc configurations. The API corresponds exactly to that for _Float128 and _Float64x. _Float32 aliases to float functions remain to be added in subsequent patches to complete this process (then there are a few miscellaneous functions in TS 18661-3 to implement that aren't simply versions of existing functions for new types). The patch enables the feature in bits/floatn-common.h, adds symbol versions and documentation with updates to ABI baselines, and arranges for the libm functions for the new types to be tested. As with the _Float64x changes there are some x86 ulps updates because of header inlines not used for the new types (and one other change to the non-multiarch libm-test-ulps, which I suppose comes from using a different compiler version / configuration from when it was last regenerated). Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT64): Define to 1. (__HAVE_FLOAT32X): Likewise. * manual/math.texi (Mathematics): Document support for _Float64 and _Float32x. * math/Makefile (test-types): Add float64 and float32x. * math/Versions (GLIBC_2.27): Add _Float64 and _Float32x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
||
|
Joseph Myers
|
e4602cba2f |
Use libm_alias_float for i386.
Continuing the preparation for additional _FloatN / _FloatNx function aliases, this patch makes i386 libm function implementations use libm_alias_float (or libm_alias_float_other in cases where the main symbol name is defined with versioned_symbol) to define function aliases. Tested with build-many-glibcs.py for all its i386 configurations that installed stripped shared libraries are unchanged by the patch, as well as running the full glibc testsuite for i686. * sysdeps/i386/fpu/s_asinhf.S: Include <libm-alias-float.h>. (asinhf): Define using libm_alias_float. * sysdeps/i386/fpu/s_atanf.S: Include <libm-alias-float.h>. (atanf): Define using libm_alias_float. * sysdeps/i386/fpu/s_cbrtf.S: Include <libm-alias-float.h>. (cbrtf): Define using libm_alias_float. * sysdeps/i386/fpu/s_ceilf.S: Include <libm-alias-float.h>. (ceilf): Define using libm_alias_float. * sysdeps/i386/fpu/s_copysignf.S: Include <libm-alias-float.h>. (copysignf): Define using libm_alias_float. * sysdeps/i386/fpu/s_expm1f.S: Include <libm-alias-float.h>. (expm1f): Define using libm_alias_float. * sysdeps/i386/fpu/s_fabsf.S: Include <libm-alias-float.h>. (fabsf): Define using libm_alias_float. * sysdeps/i386/fpu/s_floorf.S: Include <libm-alias-float.h>. (floorf): Define using libm_alias_float. * sysdeps/i386/fpu/s_fmaxf.S: Include <libm-alias-float.h>. (fmaxf): Define using libm_alias_float. * sysdeps/i386/fpu/s_fminf.S: Include <libm-alias-float.h>. (fminf): Define using libm_alias_float. * sysdeps/i386/fpu/s_frexpf.S: Include <libm-alias-float.h>. (frexpf): Define using libm_alias_float. * sysdeps/i386/fpu/s_llrintf.S: Include <libm-alias-float.h>. (llrintf): Define using libm_alias_float. * sysdeps/i386/fpu/s_logbf.S: Include <libm-alias-float.h>. (logbf): Define using libm_alias_float. * sysdeps/i386/fpu/s_lrintf.S: Include <libm-alias-float.h>. (lrintf): Define using libm_alias_float. * sysdeps/i386/fpu/s_nearbyintf.S: Include <libm-alias-float.h>. (nearbyintf): Define using libm_alias_float. * sysdeps/i386/fpu/s_remquof.S: Include <libm-alias-float.h>. (remquof): Define using libm_alias_float. * sysdeps/i386/fpu/s_rintf.S: Include <libm-alias-float.h>. (rintf): Define using libm_alias_float. * sysdeps/i386/fpu/s_truncf.S: Include <libm-alias-float.h>. (truncf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/multiarch/e_exp2f.c: Include <libm-alias-float.h>. (exp2f): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/e_expf.c: Include <libm-alias-float.h>. (expf): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/e_log2f.c: Include <libm-alias-float.h>. (log2f): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/e_logf.c: Include <libm-alias-float.h>. (logf): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/e_powf.c: Include <libm-alias-float.h>. (powf): Define using libm_alias_float, or libm_alias_float_other if [SHARED]. * sysdeps/i386/i686/fpu/multiarch/s_cosf.c: Include <libm-alias-float.h>. (cosf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/multiarch/s_sincosf.c: Include <libm-alias-float.h>. (sincosf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/multiarch/s_sinf.c: Include <libm-alias-float.h>. (sinf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/s_fmaxf.S: Include <libm-alias-float.h>. (fmaxf): Define using libm_alias_float. * sysdeps/i386/i686/fpu/s_fminf.S: Include <libm-alias-float.h>. (fminf): Define using libm_alias_float. * sysdeps/i386/i686/multiarch/s_fmaf.c: Include <libm-alias-float.h>. (fmaf): Define using libm_alias_float. |
||
|
Joseph Myers
|
bc4e8f9b49 |
Use libm_alias_double for i386.
Continuing the preparation for additional _FloatN / _FloatNx function aliases, this patch makes i386 libm function implementations use libm_alias_double to define function aliases. Tested with build-many-glibcs.py for all its i386 configurations that installed stripped shared libraries are unchanged by the patch, as well as running the full glibc testsuite for i686. * sysdeps/i386/fpu/s_asinh.S: Include <libm-alias-double.h>. (asinh): Define using libm_alias_double. * sysdeps/i386/fpu/s_atan.S: Include <libm-alias-double.h>. (atan): Define using libm_alias_double. * sysdeps/i386/fpu/s_cbrt.S: Include <libm-alias-double.h>. (cbrt): Define using libm_alias_double. * sysdeps/i386/fpu/s_ceil.S: Include <libm-alias-double.h>. (ceil): Define using libm_alias_double. * sysdeps/i386/fpu/s_copysign.S: Include <libm-alias-double.h>. (copysign): Define using libm_alias_double. * sysdeps/i386/fpu/s_expm1.S: Include <libm-alias-double.h>. (expm1): Define using libm_alias_double. * sysdeps/i386/fpu/s_fabs.S: Include <libm-alias-double.h>. (fabs): Define using libm_alias_double. * sysdeps/i386/fpu/s_fdim.c: Include <libm-alias-double.h>. (fdim): Define using libm_alias_double. * sysdeps/i386/fpu/s_floor.S: Include <libm-alias-double.h>. (floor): Define using libm_alias_double. * sysdeps/i386/fpu/s_fmax.S: Include <libm-alias-double.h>. (fmax): Define using libm_alias_double. * sysdeps/i386/fpu/s_fmin.S: Include <libm-alias-double.h>. (fmin): Define using libm_alias_double. * sysdeps/i386/fpu/s_frexp.S: Include <libm-alias-double.h>. (frexp): Define using libm_alias_double. * sysdeps/i386/fpu/s_llrint.S: Include <libm-alias-double.h>. (llrint): Define using libm_alias_double. * sysdeps/i386/fpu/s_logb.S: Include <libm-alias-double.h>. (logb): Define using libm_alias_double. * sysdeps/i386/fpu/s_lrint.S: Include <libm-alias-double.h>. (lrint): Define using libm_alias_double. * sysdeps/i386/fpu/s_nearbyint.S: Include <libm-alias-double.h>. (nearbyint): Define using libm_alias_double. * sysdeps/i386/fpu/s_remquo.S: Include <libm-alias-double.h>. (remquo): Define using libm_alias_double. * sysdeps/i386/fpu/s_rint.S: Include <libm-alias-double.h>. (rint): Define using libm_alias_double. * sysdeps/i386/fpu/s_trunc.S: Include <libm-alias-double.h>. (trunc): Define using libm_alias_double. * sysdeps/i386/i686/fpu/s_fmax.S: Include <libm-alias-double.h>. (fmax): Define using libm_alias_double. * sysdeps/i386/i686/fpu/s_fmin.S: Include <libm-alias-double.h>. (fmin): Define using libm_alias_double. * sysdeps/i386/i686/multiarch/s_fma.c: Include <libm-alias-double.h>. (fma): Define using libm_alias_double. |
||
|
Joseph Myers
|
a23aa5b727 |
Add _Float64x function aliases.
This patch continues filling out TS 18661-3 support by adding *f64x function aliases on platforms with _Float64x support. (It so happens the set of such platforms is exactly the same as the set of platforms with _Float128 support, although on x86_64, x86 and ia32 the _Float64x format is Intel extended rather than binary128.) The API provided corresponds exactly to that provided for _Float128, mostly coming from TS 18661-3. As these functions always alias those for another type (long double, _Float128 or both), __* function names are not provided, as in other cases of alias types. Given the preparation done in previous patches, this one just enables the feature via Makeconfig and bits/floatn.h, adds symbol versions, and updates documentation and ABI baselines. The symbol versions are present unconditionally as GLIBC_2.27 in the relevant Versions files, as it's OK for those to specify versions for functions that may not be present in some configurations; no additional complexity is needed unless in future some configuration gains support for this type that didn't have such support in 2.27. The Makeconfig additions for ia64 and x86 aren't strictly needed, as those configurations also get float64x-alias-fcts definitions from sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given that _Float64x is not _Float128 for those configurations. A libm-test-ulps update for x86 is included. This is because bits/mathinline.h does not have _Float64x support added and for two functions the use of out-of-line functions results in increased ulps (ifloat64x shares ulps with ildouble / ifloat128 as appropriate). Given that we'd like generally to eliminate bits/mathinline.h optimizations, preferring to have such optimizations in GCC instead, it seems reasonable not to add such support there for new types. GCC support for _FloatN / _FloatNx built-in functions is limited, but has been improved in GCC 8, and at some point I hope the full set of libm built-in functions in GCC, and other optimizations with per-floating-type aspects, will be enabled for all _FloatN / _FloatNx types. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable. * sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/x86/Makeconfig: New file. * bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * bits/floatn.h (__HAVE_FLOAT64X): New macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * manual/math.texi (Mathematics): Document support for _Float64x. * math/Versions (GLIBC_2.27): Add _Float64x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
||
|
Joseph Myers
|
2ce30701e6 |
Use libm_alias_ldouble in sysdeps/i386/fpu.
This patch continues the preparation for additional _FloatN / _FloatNx function aliases by using libm_alias_ldouble for sysdeps/i386/fpu long double functions, so that they can have _Float64x aliases added in future. Tested for x86_64 (which includes some of these implementations) and x86, including build-many-glibcs.py tests that installed stripped shared libraries are unchanged by the patch. * sysdeps/i386/fpu/e_expl.S: Include <libm-alias-ldouble.h>. [USE_AS_EXPM1L] (expm1l): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_asinhl.S: Include <libm-alias-ldouble.h>. (asinhl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_atanl.c: Include <libm-alias-ldouble.h>. (atanl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_cbrtl.S: Include <libm-alias-ldouble.h>. (cbrtl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_ceill.S: Include <libm-alias-ldouble.h>. (ceill): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_copysignl.S: Include <libm-alias-ldouble.h>. (copysignl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_fabsl.S: Include <libm-alias-ldouble.h>. (fabsl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_floorl.S: Include <libm-alias-ldouble.h>. (floorl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_fmaxl.S: Include <libm-alias-ldouble.h>. (fmaxl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_fminl.S: Include <libm-alias-ldouble.h>. (fminl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_frexpl.S: Include <libm-alias-ldouble.h>. (frexpl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_llrintl.S: Include <libm-alias-ldouble.h>. (llrintl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_logbl.c: Include <libm-alias-ldouble.h>. (logbl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_lrintl.S: Include <libm-alias-ldouble.h>. (lrintl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_nearbyintl.S: Include <libm-alias-ldouble.h>. (nearbyintl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_nextafterl.c: Include <libm-alias-ldouble.h>. (nextafterl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_remquol.S: Include <libm-alias-ldouble.h>. (remquol): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_rintl.c: Include <libm-alias-ldouble.h>. (rintl): Define using libm_alias_ldouble. * sysdeps/i386/fpu/s_truncl.S: Include <libm-alias-ldouble.h>. (truncl): Define using libm_alias_ldouble. * sysdeps/i386/i686/fpu/s_fmaxl.S: Include <libm-alias-ldouble.h>. (fmaxl): Define using libm_alias_ldouble. * sysdeps/i386/i686/fpu/s_fminl.S: Include <libm-alias-ldouble.h>. (fminl): Define using libm_alias_ldouble. |
||
|
Adhemerval Zanella
|
dff91cd45e |
nptl: Add tests for internal pthread_mutex_t offsets
This patch adds a new build test to check for internal fields offsets for user visible internal field. Although currently the only field which is statically initialized to a non zero value is pthread_mutex_t.__data.__kind value, the tests also check the offset of __kind, __spins, __elision (if supported), and __list internal member. A internal header (pthread-offset.h) is added to each major ABI with the reference value. Checked on x86_64-linux-gnu and with a build check for all affected ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf, hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu, mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu, s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu, sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32, tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32). * nptl/pthreadP.h (ASSERT_PTHREAD_STRING, ASSERT_PTHREAD_INTERNAL_OFFSET): New macro. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time checks for internal pthread_mutex_t offsets. * sysdeps/aarch64/nptl/pthread-offsets.h (__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET, __PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET, __PTHREAD_MUTEX_LIST_OFFSET): New macro. * sysdeps/alpha/nptl/pthread-offsets.h: Likewise. * sysdeps/arm/nptl/pthread-offsets.h: Likewise. * sysdeps/hppa/nptl/pthread-offsets.h: Likewise. * sysdeps/i386/nptl/pthread-offsets.h: Likewise. * sysdeps/ia64/nptl/pthread-offsets.h: Likewise. * sysdeps/m68k/nptl/pthread-offsets.h: Likewise. * sysdeps/microblaze/nptl/pthread-offsets.h: Likewise. * sysdeps/mips/nptl/pthread-offsets.h: Likewise. * sysdeps/nios2/nptl/pthread-offsets.h: Likewise. * sysdeps/powerpc/nptl/pthread-offsets.h: Likewise. * sysdeps/s390/nptl/pthread-offsets.h: Likewise. * sysdeps/sh/nptl/pthread-offsets.h: Likewise. * sysdeps/sparc/nptl/pthread-offsets.h: Likewise. * sysdeps/tile/nptl/pthread-offsets.h: Likewise. * sysdeps/x86_64/nptl/pthread-offsets.h: Likewise. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> |
||
|
H.J. Lu
|
95b93c6e0d |
x86: Add sysdeps/x86/sysdep.h
Add a new header file, sysdeps/x86/sysdep.h, for common assembly code macros between i386 and x86-64. Tested on i686 and x86-64. There are no differences in outputs of "readelf -a" and "objdump -dw" on all glibc shared objects before and after the patch. * sysdeps/i386/sysdep.h: Include <sysdeps/x86/sysdep.h> instead of <sysdeps/generic/sysdep.h>. (ALIGNARG): Removed. (ASM_SIZE_DIRECTIVE): Likewise. (ENTRY): Likewise. (END): Likewise. (ENTRY_CHK): Likewise. (END_CHK): Likewise. (syscall_error): Likewise. (mcount): Likewise. (PSEUDO_END): Likewise. (L): Likewise. (atom_text_section): Likewise. * sysdeps/x86/sysdep.h: New file. * sysdeps/x86_64/sysdep.h: Include <sysdeps/x86/sysdep.h> instead of <sysdeps/generic/sysdep.h>. (ALIGNARG): Removed. (ASM_SIZE_DIRECTIVE): Likewise. (ENTRY): Likewise. (END): Likewise. (ENTRY_CHK): Likewise. (END_CHK): Likewise. (syscall_error): Likewise. (mcount): Likewise. (PSEUDO_END): Likewise. (L): Likewise. (atom_text_section): Likewise. |
||
|
H.J. Lu
|
c5cc45148c |
i586: Use conditional branches in strcpy.S [BZ #22353]
i586 strcpy.S used a clever trick with LEA to implement jump table:
/* ECX has the last 2 bits of the address of source - 1. */
andl $3, %ecx
call 2f
2: popl %edx
/* 0xb is the distance between 2: and 1:. */
leal 0xb(%edx,%ecx,8), %ecx
jmp *%ecx
.align 8
1: /* ECX == 0 */
orb (%esi), %al
jz L(end)
stosb
xorl %eax, %eax
incl %esi
/* ECX == 1 */
orb (%esi), %al
jz L(end)
stosb
xorl %eax, %eax
incl %esi
/* ECX == 2 */
orb (%esi), %al
jz L(end)
stosb
xorl %eax, %eax
incl %esi
/* ECX == 3 */
L(1): movl (%esi), %ecx
leal 4(%esi),%esi
This fails if there are instruction length changes before L(1):. This
patch replaces it with conditional branches:
cmpb $2, %cl
je L(Src2)
ja L(Src3)
cmpb $1, %cl
je L(Src1)
L(Src0):
which have similar performance and work with any instruction lengths.
Tested on i586 and i686 with and without --disable-multi-arch.
[BZ #22353]
* sysdeps/i386/i586/strcpy.S (STRCPY): Use conditional branches.
(1): Renamed to ...
(L(Src0)): This.
(L(Src1)): New.
(L(Src2)): Likewise.
(L(1)): Renamed to ...
(L(Src3)): This.
|
||
|
H.J. Lu
|
63d3b468c1 |
i386: Regenerate libm-test-ulps for for gcc 7
Regenerate libm-test-ulps for gcc 7 with "-m32 -O2 -march=i586". * sysdeps/i386/fpu/libm-test-ulps: Regenerated for GCC 7 with "-O2 -march=i586". |
||
|
H.J. Lu
|
5313581cb5 |
i386: Replace assembly versions of e_powf with generic e_powf.c
This patch replaces i386 assembly versions of e_powf with generic
e_powf.c. For workload-spec2017.wrf, on Nehalem, it improves
performance by:
Before After Improvement
reciprocal-throughput 230.855 78.3358 194%
latency 231.685 94.1259 146%
On Skylake, it improves performance by:
Before After Improvement
reciprocal-throughput 239.858 47.4713 405%
latency 247.57 93.8798 163%
On IvyBridge with --disable-multi-arch, it improves performance by:
Before After Improvement
reciprocal-throughput 269.078 63.3758 324%
latency 271.473 102.091 165%
* sysdeps/i386/fpu/e_powf.S: Removed.
* sysdeps/i386/fpu/e_powf_log2_data.c: Likewise.
* sysdeps/i386/fpu/w_powf.c: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_powf.c.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines):
Add e_powf-sse2.
(CFLAGS-e_powf-sse2.c): New.
* sysdeps/i386/i686/fpu/multiarch/e_powf-sse2.c: New file.
* sysdeps/i386/i686/fpu/multiarch/e_powf.c: Likewise.
|
||
|
H.J. Lu
|
6089a3ee24 |
i386: Replace assembly versions of e_log2f with generic e_log2f.c
This patch replaces i386 assembly versions of e_log2f with generic
e_log2f.c. For workload-spec2017.wrf, on Nehalem, it improves
performance by:
Before After Improvement
reciprocal-throughput 92.3845 30.8752 199%
latency 112.855 54.8645 105%
On Skylake, it improves performance by:
Before After Improvement
reciprocal-throughput 98.7488 22.7507 334%
latency 118.01 51.6083 128%
On IvyBridge with --disable-multi-arch, it improves performance by:
Before After Improvement
reciprocal-throughput 106.635 28.8596 269%
latency 129.888 56.9187 128%
* sysdeps/i386/fpu/e_log2f.S: Removed.
* sysdeps/i386/fpu/e_log2f_data.c: Likewise.
* sysdeps/i386/fpu/w_log2f.c: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_log2f.c.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines):
Add e_log2f-sse2.
(CFLAGS-e_log2f-sse2.c): New.
* sysdeps/i386/i686/fpu/multiarch/e_log2f-sse2.c: New file.
* sysdeps/i386/i686/fpu/multiarch/e_log2f.c: Likewise.
|
||
|
H.J. Lu
|
fe596486d6 |
i386: Replace assembly versions of e_logf with generic e_logf.c
This patch replaces i386 assembly versions of e_logf with generic
e_logf.c. For workload-spec2017.wrf, on Nehalem, it improves
performance by:
Before After Improvement
reciprocal-throughput 73.3865 40.0454 83%
latency 90.0985 54.4479 65%
On Skylake, it improves performance by:
Before After Improvement
reciprocal-throughput 75.1384 22.1452 239%
latency 91.9441 50.7925 81%
On IvyBridge with --disable-multi-arch, it improves performance by:
Before After Improvement
reciprocal-throughput 84.5575 28.7879 193%
latency 103.971 57.5231 80%
* sysdeps/i386/fpu/e_logf.S: Removed.
* sysdeps/i386/fpu/e_logf_data.c: Likewise.
* sysdeps/i386/fpu/w_logf.c: Likewise.
* sysdeps/i386/i686/fpu/e_logf.S: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_logf.c.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines):
Add e_logf-sse2.
(CFLAGS-e_logf-sse2.c): New.
* sysdeps/i386/i686/fpu/multiarch/e_logf-sse2.c: New file.
* sysdeps/i386/i686/fpu/multiarch/e_logf.c: Likewise.
|
||
|
H.J. Lu
|
7eda65f69e |
i386: Replace assembly versions of e_exp2f with generic e_exp2f.c
This patch replaces i386 assembly versions of e_exp2f with generic
e_exp2f.c. For workload-spec2017.wrf, on Nehalem, it improves
performance by:
Before After Improvement
reciprocal-throughput 112.996 40.0454 182%
latency 126.581 54.4479 132%
On Skylake, it improves performance by:
Before After Improvement
reciprocal-throughput 113.14 39.447 186%
latency 136.068 55.684 144%
On IvyBridge with --disable-multi-arch, it improves performance by:
Before After Improvement
reciprocal-throughput 132.521 40.3759 228%
latency 145.791 58.4587 149%
* sysdeps/i386/fpu/e_exp2f.S: Removed.
* sysdeps/i386/fpu/w_exp2f.c: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_exp2f.c.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines):
Add e_exp2f-sse2.
(CFLAGS-e_exp2f-sse2.c): New.
* sysdeps/i386/i686/fpu/multiarch/e_exp2f-sse2.c: New file.
* sysdeps/i386/i686/fpu/multiarch/e_exp2f.c: Likewise.
|
||
|
H.J. Lu
|
b2f6137ea5 |
i386: Replace assembly versions of e_expf with generic e_expf.c
This patch replaces i386 assembly versions of e_expf with generic
e_expf.c. For workload-spec2017.wrf, on Nehalem, it improves
performance by:
Before After Improvement
reciprocal-throughput 55.5724 40.2664 38%
latency 80.0687 60.8517 31%
On Skylake, it improves performance by:
Before After Improvement
reciprocal-throughput 62.4056 39.4188 58%
latency 85.5496 59.6377 43%
On IvyBridge with --disable-multi-arch, it improves performance by:
Before After Improvement
reciprocal-throughput 133.707 40.3778 231%
latency 149.191 63.2515 135%
* sysdeps/i386/fpu/e_exp2f_data.c: Removed.
* sysdeps/i386/fpu/e_expf.S: Likewise.
* sysdeps/i386/fpu/math_errf.c: Likewise.
* sysdeps/i386/fpu/w_expf.c: Likewise.
* sysdeps/i386/i686/fpu/multiarch/e_expf-ia32.S: Likewise.
* sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.S: Likewise.
* sysdeps/i386/i686/fpu/multiarch/w_expf.c: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_expf.c.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines):
Remove e_expf-ia32.
(CFLAGS-e_expf-sse2.c): New.
* sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.c: New file.
* sysdeps/i386/i686/fpu/multiarch/e_expf.c: Rewritten.
|
||
|
H.J. Lu
|
95ccb619f5 |
i386: Regenerate libm-test-ulps
Regenerate libm-test-ulps for --disable-multi-arch. * sysdeps/i386/fpu/libm-test-ulps: Regenerated. |
||
|
H.J. Lu
|
ee417882e0 |
Don't use hidden visibility in libc.a with PIE on i386
On i386, when multi-arch is enabled, all external functions must be called via PIC PLT in PIE, which requires setting up EBX register, since they may be IFUNC functions. * config.h.in (NO_HIDDEN_EXTERN_FUNC_IN_PIE): New. * include/libc-symbols.h (__hidden_proto_hiddenattr): Add check for PIC and NO_HIDDEN_EXTERN_FUNC_IN_PIE. * sysdeps/i386/configure.ac (NO_HIDDEN_EXTERN_FUNC_IN_PIE): New AC_DEFINE if multi-arch is enabled. * sysdeps/i386/configure: Regenerated. |
||
|
H.J. Lu
|
955774751b |
i386: Use "movl main@GOT(%ebx), %eax" in start.S
Don't use "leal main@GOTOFF(%ebx), %eax" since main may be in a shared object. Linker will convert "movl main@GOT(%ebx), %eax" to "leal main@GOTOFF(%ebx), %eax" if main is defined locally. * sysdeps/i386/start.S: Replace "leal main@GOT(%ebx), %eax" with "movl main@GOTOFF(%ebx), %eax". |
||
|
H.J. Lu
|
02d2d8927d |
Revert x86: Allow undefined _DYNAMIC in static executable
This code is used in non-PIE static executable and static PIE. It checks if _DYNAMIC is undefined before using it to compute load address. But not all targets can convert access _DYNAMIC via GOT, which needs dynamic relocation, to PC-relative at link-time. * sysdeps/i386/dl-machine.h (elf_machine_load_address): Don't allow undefined _DYNAMIC in PIE libc.a. * sysdeps/x86_64/dl-machine.h (elf_machine_load_address): Likewse. |
||
|
Szabolcs Nagy
|
bd4430c2a6 |
Do not wrap logf, log2f and powf
The new generic logf, log2f and powf code don't need wrappers any more, they set errno inline so only use the wrappers on targets that need it. * sysdeps/ieee754/flt-32/e_log2f.c (__log2f): Define without wrapper. * sysdeps/ieee754/flt-32/e_logf.c (__logf): Likewise * sysdeps/ieee754/flt-32/e_powf.c (__powf): Likewise * sysdeps/ieee754/flt-32/w_log2f.c: New file. * sysdeps/ieee754/flt-32/w_logf.c: New file. * sysdeps/ieee754/flt-32/w_powf.c: New file. * sysdeps/i386/fpu/w_log2f.c: New file. * sysdeps/i386/fpu/w_logf.c: New file. * sysdeps/i386/fpu/w_powf.c: New file. * sysdeps/m68k/m680x0/fpu/w_log2f.c: New file. * sysdeps/m68k/m680x0/fpu/w_logf.c: New file. * sysdeps/m68k/m680x0/fpu/w_powf.c: New file. |
||
|
Szabolcs Nagy
|
f7a0b063e7 |
Do not wrap expf and exp2f
The new generic expf and exp2f code don't need wrappers any more, they set errno inline, so only use the wrappers on targets that need it. (If the wrapper is needed, then the top level wrapper code is included, otherwise empty w_exp*f.c is used to suppress the wrapper.) A powerpc64 expf implementation includes the expf c code directly which needed some changes. * sysdeps/ieee754/flt-32/e_exp2f.c (__exp2f): Define without wrapper. * sysdeps/ieee754/flt-32/e_expf.c (__expf): Likewise * sysdeps/ieee754/flt-32/w_exp2f.c: New file. * sysdeps/ieee754/flt-32/w_expf.c: New file. * sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf-ppc64.c: Update for the new expf code. * sysdeps/powerpc/powerpc64/fpu/multiarch/w_expf.c: New file. * sysdeps/powerpc/powerpc64/power8/fpu/w_expf.c: New file. * sysdeps/m68k/m680x0/fpu/w_exp2f.c: New file. * sysdeps/m68k/m680x0/fpu/w_expf.c: New file. * sysdeps/i386/fpu/w_exp2f.c: New file. * sysdeps/i386/fpu/w_expf.c: New file. * sysdeps/i386/i686/fpu/multiarch/w_expf.c: New file. * sysdeps/x86_64/fpu/w_expf.c: New file. |
||
|
H.J. Lu
|
8bcdb7e0c5 |
Mark internal functions with attribute_hidden [BZ #18822]
Mark internal functions with attribute_hidden to allow direct access to
internal functions within libc.so and libc.a without using GOT nor PLT.
Size comparison of libc.so:
On x86-64:
text data bss dec hex
Before: 1728577 20584 17088 1766249 1af369
After : 1728593 20584 17088 1766265 1af379
The only change is __gconv_release_shlib in iconv/gconv_dl.c is inlined
since it is hidden, which increases the code size of gconv_dl.os by 18
bytes.
On i686:
text data bss dec hex
Before: 1869039 11444 11112 1891595 1cdd0b
After : 1868635 11444 11112 1891191 1cdb77
The code size is decreased by avoiding GOT/PLT for hidden functions.
[BZ #18822]
* iconv/gconv_int.h (__gconv_open): Add attribute_hidden.
(__gconv_close): Likewise.
(__gconv): Likewise.
(__gconv_find_transform): Likewise.
(__gconv_lookup_cache): Likewise.
(__gconv_compare_alias_cache): Likewise.
(__gconv_load_cache): Likewise.
(__gconv_get_path): Likewise.
(__gconv_close_transform): Likewise.
(__gconv_release_cache): Likewise.
(__gconv_find_shlib): Likewise.
(__gconv_release_shlib): Likewise.
(__gconv_get_builtin_trans): Likewise.
(__gconv_compare_alias): Likewise.
* include/dlfcn.h (_dlerror_run): Likewise.
* include/stdio.h (__fortify_fail_abort): Likewise.
* include/time.h (__tz_compute): Likewise.
(__strptime_internal): Likewise.
* intl/gettextP.h (_nl_find_domain): Likewise.
(_nl_load_domain): Likewise.
(_nl_find_msg): Likewise.
* intl/plural-exp.h (FREE_EXPRESSION): Likewise.
(EXTRACT_PLURAL_EXPRESSION): Likewise.
* locale/coll-lookup.h (__collidx_table_lookup): Likewise.
* resolv/gai_misc.h (__gai_enqueue_request): Likewise.
(__gai_find_request): Likewise.
(__gai_remove_request): Likewise.
(__gai_notify): Likewise.
(__gai_notify_only): Likewise.
* sysdeps/generic/aio_misc.h (__aio_sigqueue): Likewise.
* sysdeps/generic/ldsodefs.h (_dl_fini): Likewise.
(_dl_non_dynamic_init): Likewise.
(_dl_aux_init): Likewise.
* sysdeps/i386/machine-gmon.h (mcount_internal): Likewise.
* sysdeps/unix/sysv/linux/i386/olddirent.h (__old_getdents64):
Likewise.
* wcsmbs/wcsmbsload.h (__wcsmbs_load_conv): Likewise.
(__wcsmbs_clone_conv): Likewise.
(__wcsmbs_named_conv): Likewise.
|
||
|
Szabolcs Nagy
|
4ea49f4c08 |
New generic powf
without wrapper on aarch64: powf reciprocal-throughput: 4.2x faster powf latency: 2.6x faster old worst-case error: 1.11 ulp new worst-case error: 0.82 ulp aarch64 .text size: -780 bytes aarch64 .rodata size: +144 bytes powf(x,y) is implemented as exp2(y*log2(x)) with the same algorithms that are used in exp2f and log2f, except that the log2f polynomial is larger for extra precision and its output (and exp2f input) may be scaled by a power of 2 (POWF_SCALE) to simplify the argument reduction step of exp2 (possible when efficient round and convert toint operation is available). The special case handling tries to minimize the checks in the hot path. When the input of exp2_inline is checked, int arithmetics is used as that was faster on the tested aarch64 cores. * math/Makefile (type-float-routines): Add e_powf_log2_data. * sysdeps/ieee754/flt-32/e_powf.c: New implementation. * sysdeps/ieee754/flt-32/e_powf_log2_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__powf_log2_data): Define. (issignalingf_inline): Likewise. (POWF_LOG2_TABLE_BITS): Likewise. (POWF_LOG2_POLY_ORDER): Likewise. (POWF_SCALE_BITS): Likewise. (POWF_SCALE): Likewise. * sysdeps/i386/fpu/e_powf_log2_data.c: New file. * sysdeps/ia64/fpu/e_powf_log2_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_powf_log2_data.c: New file. |
||
|
Szabolcs Nagy
|
875c76c704 |
New generic log2f
Similar to the new logf: double precision arithmetics and a small lookup table is used. The argument reduction step is the same as in the new logf. without wrapper on aarch64: log2f reciprocal-throughput: 2.3x faster log2f latency: 2.1x faster old worst case error: 1.72 ulp new worst case error: 0.75 ulp aarch64 .text size: -252 bytes aarch64 .rodata size: +244 bytes * math/Makefile (type-float-routines): Add e_log2f_data. * sysdeps/ieee754/flt-32/e_log2f.c: New implementation. * sysdeps/ieee754/flt-32/e_log2f_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__log2f_data): Define. (LOG2F_TABLE_BITS, LOG2F_POLY_ORDER): Define. * sysdeps/i386/fpu/e_log2f_data.c: New file. * sysdeps/ia64/fpu/e_log2f_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_log2f_data.c: New file. |
||
|
Szabolcs Nagy
|
bf27d3973d |
New generic logf
without wrapper on aarch64: logf reciprocal-throughput: 2.2x faster logf latency: 1.9x faster old worst case error: 0.89 ulp new worst case error: 0.82 ulp aarch64 .text size: -356 bytes aarch64 .rodata size: +240 bytes Uses double precision arithmetics and a lookup table to allow smaller polynomial and avoid the use of division. Data is in a separate translation unit with fixed layout to prevent the compiler generating suboptimal literal access. Errors are handled inline according to POSIX rules, but this patch keeps the wrapper with SVID compatible error handling. Needs libm-test-ulps adjustment for clogf in non-nearest rounding mode. * math/Makefile (type-float-routines): Add e_logf_data. * sysdeps/ieee754/flt-32/e_logf.c: New implementation. * sysdeps/ieee754/flt-32/e_logf_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__logf_data): Define. (LOGF_TABLE_BITS, LOGF_POLY_ORDER): Define. * sysdeps/i386/fpu/e_logf_data.c: New file. * sysdeps/ia64/fpu/e_logf_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_logf_data.c: New file. |
||
|
H.J. Lu
|
4088d8dd29 |
x86: Allow undefined _DYNAMIC in static executable
When --enable-static-pie is used to build static PIE, _DYNAMIC is used to compute the load address of static PIE. But _DYNAMIC is undefined when creating static executable. This patch makes _DYNAMIC weak in PIE libc.a so that it can be undefined. * sysdeps/i386/dl-machine.h (elf_machine_load_address): Allow undefined _DYNAMIC in PIE libc.a. * sysdeps/x86_64/dl-machine.h (elf_machine_load_address): Likewse. |