Wrap symbol address run-time calculation into a macro and use it
throughout, replacing inline calculations.
There are a couple of variants, most of them different in a functionally
insignificant way. Most calculations are right following RESOLVE_MAP,
at which point either the map or the symbol returned can be checked for
validity as the macro sets either both or neither. In some places both
the symbol and the map has to be checked however.
My initial implementation therefore always checked both, however that
resulted in code larger by as much as 0.3%, as many places know from
elsewhere that no check is needed. I have decided the size growth was
unacceptable.
Having looked closer I realized that it's the map that is the culprit.
Therefore I have modified LOOKUP_VALUE_ADDRESS to accept an additional
boolean argument telling it to access the map without checking it for
validity. This in turn has brought quite nice results, with new code
actually being smaller for i686, and MIPS o32, n32 and little-endian n64
targets, unchanged in size for x86-64 and, unusually, marginally larger
for big-endian MIPS n64, as follows:
i686:
text data bss dec hex filename
152255 4052 192 156499 26353 ld-2.27.9000-base.so
152159 4052 192 156403 262f3 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/el:
text data bss dec hex filename
142906 4396 260 147562 2406a ld-2.27.9000-base.so
142890 4396 260 147546 2405a ld-2.27.9000-elf-symbol-value.so
MIPS/n32/el:
text data bss dec hex filename
142267 4404 260 146931 23df3 ld-2.27.9000-base.so
142171 4404 260 146835 23d93 ld-2.27.9000-elf-symbol-value.so
MIPS/n64/el:
text data bss dec hex filename
149835 7376 408 157619 267b3 ld-2.27.9000-base.so
149787 7376 408 157571 26783 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/eb:
text data bss dec hex filename
142870 4396 260 147526 24046 ld-2.27.9000-base.so
142854 4396 260 147510 24036 ld-2.27.9000-elf-symbol-value.so
MIPS/n32/eb:
text data bss dec hex filename
142019 4404 260 146683 23cfb ld-2.27.9000-base.so
141923 4404 260 146587 23c9b ld-2.27.9000-elf-symbol-value.so
MIPS/n64/eb:
text data bss dec hex filename
149763 7376 408 157547 2676b ld-2.27.9000-base.so
149779 7376 408 157563 2677b ld-2.27.9000-elf-symbol-value.so
x86-64:
text data bss dec hex filename
148462 6452 400 155314 25eb2 ld-2.27.9000-base.so
148462 6452 400 155314 25eb2 ld-2.27.9000-elf-symbol-value.so
[BZ #19818]
* sysdeps/generic/ldsodefs.h (LOOKUP_VALUE_ADDRESS): Add `set'
parameter.
(SYMBOL_ADDRESS): New macro.
[!ELF_FUNCTION_PTR_IS_SPECIAL] (DL_SYMBOL_ADDRESS): Use
SYMBOL_ADDRESS for symbol address calculation.
* elf/dl-runtime.c (_dl_fixup): Likewise.
(_dl_profile_fixup): Likewise.
* elf/dl-symaddr.c (_dl_symbol_address): Likewise.
* elf/rtld.c (dl_main): Likewise.
* sysdeps/aarch64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/alpha/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/hppa/dl-symaddr.c (_dl_symbol_address): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC):
Likewise.
(elf_machine_reloc): Likewise.
(elf_machine_got_rel): Likewise.
* sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/riscv/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This series of patches removes the slow patchs from sin, cos and sincos.
Besides greatly simplifying the implementation, the new version is also much
faster for inputs up to PI (41% faster) and for large inputs needing range
reduction (27% faster).
ULP is ~0.55 with no errors found after testing 1.6 billion inputs across most
of the range with mpsin and mpcos. The number of incorrectly rounded results
(ie. ULP >0.5) is at most ~2750 per million inputs between 0.125 and 0.5,
the average is ~850 per million between 0 and PI.
Tested on AArch64 and x86_64 with no regressions.
The first patch removes the slow paths for the cases where the input is small
and doesn't require range reduction. Update ULP tables for sin, cos and sincos
on AArch64 and x86_64.
* sysdeps/aarch64/libm-test-ulps: Update ULP for sin, cos, sincos.
* sysdeps/ieee754/dbl-64/s_sin.c (__sin): Remove slow paths for small
inputs.
(__cos): Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Update ULP for sin, cos, sincos.
No glibc configuration uses the present debug/backtrace.c, whereas
several #include the x86_64 version. The x86_64 version is
effectively a generic one (using _Unwind_Backtrace from libgcc, which
works much more reliably than the built-in functions used by
debug/backtrace.c). This patch moves it to debug/backtrace.c and
removes all the #includes of the x86_64 version from other
architectures which are no longer required.
I do not know whether all the other architecture-specific backtrace
implementations that are based on _Unwind_Backtrace are required, or
whether, where their differences from the generic version do something
useful, suitable hooks could be added to the generic version to reduce
the duplication involved.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* sysdeps/x86_64/backtrace.c: Move to ....
* debug/backtrace.c: ... here.
* sysdeps/aarch64/backtrace.c: Remove file.
* sysdeps/alpha/backtrace.c: Likewise.
* sysdeps/hppa/backtrace.c: Likewise.
* sysdeps/ia64/backtrace.c: Likewise.
* sysdeps/mips/backtrace.c: Likewise.
* sysdeps/nios2/backtrace.c: Likewise.
* sysdeps/riscv/backtrace.c: Likewise.
* sysdeps/sh/backtrace.c: Likewise.
* sysdeps/tile/backtrace.c: Likewise.
Remove the now unused target specific__ieee754_sqrt(f/l) inlines.
Also remove inlines of sqrt which are for really old GCC versions.
Removing these is desirable, under the general principle of leaving
such inlining to the compiler rather than trying to do it in installed
headers, especially when only very old compilers are affected.
Note that removing inlines for __ieee754_sqrt disables inlining in the
sqrt wrapper functions. Given the sqrt function will typically only be
called for negative arguments, it doesn't matter whether the inlining
happens or not.
* sysdeps/aarch64/fpu/math_private.h (__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
* sysdeps/alpha/fpu/math_private.h (__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
* sysdeps/generic/math-type-macros.h (M_SQRT): Use sqrt.
* sysdeps/m68k/m680x0/fpu/mathimpl.h (__ieee754_sqrt): Remove.
* sysdeps/powerpc/fpu/math_private.h (__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
* sysdeps/s390/fpu/bits/mathinline.h: Remove file.
* sysdeps/sparc/fpu/bits/mathinline.h (sqrt) Remove.
(sqrtf): Remove.
(sqrtl): Remove.
(__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
(__ieee754_sqrtl): Remove.
* sysdeps/m68k/m680x0/fpu/mathimpl.h (__ieee754_sqrt): Remove.
* sysdeps/x86/fpu/math_private.h (__ieee754_sqrt): Remove.
* sysdeps/x86_64/fpu/math_private.h (__ieee754_sqrt): Remove.
(__ieee754_sqrtf): Remove.
(__ieee754_sqrtl): Remove.
Remove the slow paths from pow. Like several other double precision math
functions, pow is exactly rounded. This is not required from math functions
and causes major overheads as it requires multiple fallbacks using higher
precision arithmetic if a result is close to 0.5ULP. Ridiculous slowdowns
of up to 100000x have been reported when the highest precision path triggers.
All GLIBC math tests pass on AArch64 and x64 (with ULP of pow set to 1).
The worst case error is ~0.506ULP. A simple test over a few hundred million
values shows pow is 10% faster on average. This fixes BZ #13932.
[BZ #13932]
* sysdeps/ieee754/dbl-64/uexp.h (err_1): Remove.
* benchtests/pow-inputs: Update comment for slow path cases.
* manual/probes.texi (slowpow_p10): Delete removed probe.
(slowpow_p10): Likewise.
* math/Makefile: Remove halfulp.c and slowpow.c.
* sysdeps/aarch64/libm-test-ulps: Set ULP of pow to 1.
* sysdeps/generic/math_private.h (__exp1): Remove error argument.
(__halfulp): Remove.
(__slowpow): Remove.
* sysdeps/i386/fpu/halfulp.c: Delete file.
* sysdeps/i386/fpu/slowpow.c: Likewise.
* sysdeps/ia64/fpu/halfulp.c: Likewise.
* sysdeps/ia64/fpu/slowpow.c: Likewise.
* sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove error argument,
improve comments and add error analysis.
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Add error analysis.
(power1): Remove function:
(log1): Remove error argument, add error analysis.
(my_log2): Remove function.
* sysdeps/ieee754/dbl-64/halfulp.c: Delete file.
* sysdeps/ieee754/dbl-64/slowpow.c: Likewise.
* sysdeps/m68k/m680x0/fpu/halfulp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowpow.c: Likewise.
* sysdeps/powerpc/power4/fpu/Makefile: Remove CPPFLAGS-slowpow.c.
* sysdeps/x86_64/fpu/libm-test-ulps: Set ULP of pow to 1.
* sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowpow-fma.c,
slowpow-fma4.c, halfulp-fma.c, halfulp-fma4.c.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__slowpow): Remove define.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__slowpow): Likewise.
* sysdeps/x86_64/fpu/multiarch/halfulp-fma.c: Delete file.
* sysdeps/x86_64/fpu/multiarch/halfulp-fma4.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowpow-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowpow-fma4.c: Likewise.
In commit cba595c350 and commit
f81ddabffd, ABI compatibility with
applications was broken by increasing the size of the on-stack
allocated __pthread_unwind_buf_t beyond the oringal size.
Applications only have the origianl space available for
__pthread_unwind_register, and __pthread_unwind_next to use,
any increase in the size of __pthread_unwind_buf_t causes these
functions to write beyond the original structure into other
on-stack variables leading to segmentation faults in common
applications like vlc. The only workaround is to version those
functions which operate on the old sized objects, but this must
happen in glibc 2.28.
Thank you to Andrew Senkevich, H.J. Lu, and Aurelien Jarno, for
submitting reports and tracking the issue down.
The commit reverts the above mentioned commits and testing on
x86_64 shows that the ABI compatibility is restored. A tst-cleanup1
regression test linked with an older glibc now passes when run
with the newly built glibc. Previously a tst-cleanup1 linked with
an older glibc would segfault when run with an affected glibc build.
Tested on x86_64 with no regressions.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
_dl_runtime_profile calls _dl_call_pltexit, passing a pointer to
La_x86_64_retval which is allocated on stack. The lrv_vector0
field in La_x86_64_retval must be aligned to size of vector register.
When allocating stack space for La_x86_64_retval, we need to make sure
that the address of La_x86_64_retval + RV_VECTOR0_OFFSET is aligned to
VEC_SIZE. This patch checks the alignment of the lrv_vector0 field
and pads the stack space if needed.
Tested with x32 and x86-64 on SSE4, AVX and AVX512 machines. It fixed
FAIL: elf/tst-audit10
FAIL: elf/tst-audit4
FAIL: elf/tst-audit5
FAIL: elf/tst-audit6
FAIL: elf/tst-audit7
on x32 AVX512 machine.
[BZ #22715]
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_profile): Properly
align La_x86_64_retval to VEC_SIZE.
The x86_64 backtrace implementation is used as a generic
implementation (unwinding via unwind info and _Unwind_Backtrace) by
various other architectures. This patch makes it more generic by
making it use LIBGCC_S_SO from gnu/lib-names.h instead of hardcoding
the libgcc_s.so.1 name, so that it can also be used on hppa which uses
libgcc_s.so.4.
Tested for x86_64.
* sysdeps/x86_64/backtrace.c: Include <gnu/lib-names.h>.
(init): Use LIBGCC_S_SO not hardcoded "libgcc_s.so.1".
Since the x86-64 assembly version of sincosf is higly optimized with
vector instructions, there isn't much room for improvement. However
s_sincosf.c written in C with vector math and intrinsics can be
optimized by GCC with FMA.
On Skylake, bench-sincosf reports performance improvement:
Assembly FMA improvement
max 104.042 101.008 3%
min 9.426 8.586 10%
mean 20.6209 18.2238 13%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_sincosf-sse2 and s_sincosf-fma.
(CFLAGS-s_sincosf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-sse2.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sincosf.c: Likewise.
* sysdeps/x86_64/fpu/s_sincosf.S: Don't add alias if
__sincosf is defined.
These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.
Typical performance gains is typically around 5x when measured on
Sparc s7 for common values between exp(1) and exp(40).
Using the glibc perf tests on sparc,
sparc (nsec) x86 (nsec)
old new old new
max 17629 395 5173 144
min 399 54 15 13
mean 5317 200 1349 23
The extreme max times for the old (ieee754) exp are due to the
multiprecision computation in the old algorithm when the true value is
very near 0.5 ulp away from an value representable in double
precision. The new algorithm does not take special measures for those
cases. The current glibc exp perf tests overrepresent those values.
Informal testing suggests approximately one in 200 cases might
invoke the high cost computation. The performance advantage of the new
algorithm for other values is still large but not as large as indicated
by the chart above.
Glibc correctness tests for exp() and expf() were run. Within the
test suite 3 input values were found to cause 1 bit differences (ulp)
when "FE_TONEAREST" rounding mode is set. No differences in exp() were
seen for the tested values for the other rounding modes.
Typical example:
exp(-0x1.760cd2p+0) (-1.46113312244415283203125)
new code: 2.31973271630014299393707e-01 0x1.db14cd799387ap-3
old code: 2.31973271630014271638132e-01 0x1.db14cd7993879p-3
exp = 2.31973271630014285508337 (high precision)
Old delta: off by 0.49 ulp
New delta: off by 0.51 ulp
In addition, because ieee754_exp() is used by other routines, cexp()
showed test results with very small imaginary input values where the
imaginary portion of the result was off by 3 ulp when in upward
rounding mode, but not in the other rounding modes. For x86, tgamma
showed a few values where the ulp increased to 6 (max ulp for tgamma
is 5). Sparc tgamma did not show these failures. I presume the tgamma
differences are due to compiler optimization differences within the
gamma function.The gamma function is known to be difficult to compute
accurately.
* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
<errno.h>. Include "eexp.tbl".
(half): New constant.
(one): Likewise.
(__ieee754_exp): Rewrite.
(__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
* sysdeps/i386/fpu/slowexp.c: Likewise.
* sysdeps/ia64/fpu/slowexp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
comment.
* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
(CPPFLAGS-slowexp.c): Remove variable.
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
(CFLAGS-slowexp-fma.c): Remove variable.
(CFLAGS-slowexp-fma4.c): Likewise.
(CFLAGS-slowexp-avx.c): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
define as macro.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
* math/Makefile (type-double-routines): Remove slowexp.
* manual/probes.texi (slowexp_p6): Remove.
(slowexp_p32): Likewise.
On x86, padding in struct __jmp_buf_tag is used for shadow stack pointer
to support Shadow Stack in Intel Control-flow Enforcemen Technology.
cancel_jmp_buf has been updated to include saved_mask so that it is as
large as struct __jmp_buf_tag. We must suport the old cancel_jmp_buf
in existing binaries. Since symbol versioning doesn't work on
cancel_jmp_buf, feature_1 is added to tcbhead_t so that setjmp and
longjmp can check if shadow stack is enabled. NB: Shadow stack is
enabled only if all modules are shadow stack enabled.
[BZ #22563]
* sysdeps/i386/nptl/tcb-offsets.sym (FEATURE_1_OFFSET): New.
* sysdeps/i386/nptl/tls.h (tcbhead_t): Add feature_1.
* sysdeps/x86_64/nptl/tcb-offsets.sym (FEATURE_1_OFFSET): New.
* sysdeps/x86_64/nptl/tls.h (tcbhead_t): Rename __glibc_unused1
to feature_1.
Static PIE extends address space layout randomization to static
executables. It provides additional security hardening benefits at
the cost of some memory and performance.
Dynamic linker, ld.so, is a standalone program which can be loaded at
any address. This patch adds a configure option, --enable-static-pie,
to embed the part of ld.so in static executable to create static position
independent executable (static PIE). A static PIE is similar to static
executable, but can be loaded at any address without help from a dynamic
linker. When --enable-static-pie is used to configure glibc, libc.a is
built as PIE and all static executables, including tests, are built as
static PIE. The resulting libc.a can be used together with GCC 8 or
above to build static PIE with the compiler option, -static-pie. But
GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC
with PIE support is needed. When an older GCC is used to build glibc
with --enable-static-pie, proper input files are passed to linker to
create static executables as static PIE, together with "-z text" to
prevent dynamic relocations in read-only segments, which are not allowed
in static PIE.
The following changes are made for static PIE:
1. Add a new function, _dl_relocate_static_pie, to:
a. Get the run-time load address.
b. Read the dynamic section.
c. Perform dynamic relocations.
Dynamic linker also performs these steps. But static PIE doesn't load
any shared objects.
2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in
libc.a. crt1.o, which is used to create dynamic and non-PIE static
executables, is updated to include a dummy _dl_relocate_static_pie.
rcrt1.o is added to create static PIE, which will link in the real
_dl_relocate_static_pie. grcrt1.o is also added to create static PIE
with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for
static PIE.
Static PIE can work on all architectures which support PIE, provided:
1. Target must support accessing of local functions without dynamic
relocations, which is needed in start.S to call __libc_start_main with
function addresses of __libc_csu_init, __libc_csu_fini and main. All
functions in static PIE are local functions. If PIE start.S can't reach
main () defined in a shared object, the code sequence:
pass address of local_main to __libc_start_main
...
local_main:
tail call to main via PLT
can be used.
2. start.S is updated to check PIC instead SHARED for PIC code path and
avoid dynamic relocation, when PIC is defined and SHARED isn't defined,
to support static PIE.
3. All assembly codes are updated check PIC instead SHARED for PIC code
path to avoid dynamic relocations in read-only sections.
4. All assembly codes are updated check SHARED instead PIC for static
symbol name.
5. elf_machine_load_address in dl-machine.h are updated to support static
PIE.
6. __brk works without TLS nor dynamic relocations in read-only section
so that it can be used by __libc_setup_tls to initializes TLS in static
PIE.
NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled
with -fPIE, regardless if --enable-static-pie is used to configure glibc.
When glibc is configured with --enable-static-pie, libc.a is compiled
with -fPIE, regardless whether GCC defaults to PIE or not. The same
libc.a can be used to build both static executable and static PIE.
There is no need for separate PIE copy of libc.a.
On x86-64, the normal static sln:
text data bss dec hex filename
625425 8284 5456 639165 9c0bd elf/sln
the static PIE sln:
text data bss dec hex filename
657626 20636 5392 683654 a6e86 elf/sln
The code size is increased by 5% and the binary size is increased by 7%.
Linker requirements to build glibc with --enable-static-pie:
1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from
static PIE.
2. Linker can create working static PIE. The x86-64 linker needs the
fix for
https://sourceware.org/bugzilla/show_bug.cgi?id=21782
The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax"
to "leal main@GOTOFF(%ebx), %eax" if main is defined locally.
Binutils 2.29 or above are OK for i686 and x86-64. But linker status for
other targets need to be verified.
3. Linker should resolve undefined weak symbols to 0 in static PIE:
https://sourceware.org/bugzilla/show_bug.cgi?id=22269
4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS
relocations, which should check bfd_link_executable instead:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Tested on aarch64, i686 and x86-64.
Using GCC 7 and binutils master branch, build-many-glibcs.py with
--enable-static-pie with all patches for static PIE applied have the
following build successes:
PASS: glibcs-aarch64_be-linux-gnu build
PASS: glibcs-aarch64-linux-gnu build
PASS: glibcs-armeb-linux-gnueabi-be8 build
PASS: glibcs-armeb-linux-gnueabi build
PASS: glibcs-armeb-linux-gnueabihf-be8 build
PASS: glibcs-armeb-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabi build
PASS: glibcs-arm-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabihf-v7a build
PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build
PASS: glibcs-m68k-linux-gnu build
PASS: glibcs-microblazeel-linux-gnu build
PASS: glibcs-microblaze-linux-gnu build
PASS: glibcs-mips64el-linux-gnu-n32 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n32-soft build
PASS: glibcs-mips64el-linux-gnu-n64 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n64-soft build
PASS: glibcs-mips64-linux-gnu-n32 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n32-soft build
PASS: glibcs-mips64-linux-gnu-n64 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n64-soft build
PASS: glibcs-mipsel-linux-gnu build
PASS: glibcs-mipsel-linux-gnu-nan2008 build
PASS: glibcs-mipsel-linux-gnu-nan2008-soft build
PASS: glibcs-mipsel-linux-gnu-soft build
PASS: glibcs-mips-linux-gnu build
PASS: glibcs-mips-linux-gnu-nan2008 build
PASS: glibcs-mips-linux-gnu-nan2008-soft build
PASS: glibcs-mips-linux-gnu-soft build
PASS: glibcs-nios2-linux-gnu build
PASS: glibcs-powerpc64le-linux-gnu build
PASS: glibcs-powerpc64-linux-gnu build
PASS: glibcs-tilegxbe-linux-gnu-32 build
PASS: glibcs-tilegxbe-linux-gnu build
PASS: glibcs-tilegx-linux-gnu-32 build
PASS: glibcs-tilegx-linux-gnu build
PASS: glibcs-tilepro-linux-gnu build
and the following build failures:
FAIL: glibcs-alpha-linux-gnu build
elf/sln is failed to link due to:
assertion fail bfd/elf64-alpha.c:4125
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-hppa-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
https://sourceware.org/bugzilla/show_bug.cgi?id=22537
FAIL: glibcs-ia64-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
FAIL: glibcs-powerpc-linux-gnu build
FAIL: glibcs-powerpc-linux-gnu-soft build
FAIL: glibcs-powerpc-linux-gnuspe build
FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22264
FAIL: glibcs-powerpc-linux-gnu-power4 build
elf/sln is failed to link due to:
findlocale.c:96:(.text+0x22c): @local call to ifunc memchr
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-s390-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped
assertion fail bfd/elflink.c:14299
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-sh3eb-linux-gnu build
FAIL: glibcs-sh3-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu-soft build
FAIL: glibcs-sh4-linux-gnu build
FAIL: glibcs-sh4-linux-gnu-soft build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS
code sequence expected by ld:
https://sourceware.org/bugzilla/show_bug.cgi?id=22270
FAIL: glibcs-sparc64-linux-gnu build
FAIL: glibcs-sparcv9-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu-32 build
FAIL: glibcs-tilegx-linux-gnu build
FAIL: glibcs-tilegx-linux-gnu-32 build
FAIL: glibcs-tilepro-linux-gnu build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
[BZ #19574]
* INSTALL: Regenerated.
* Makeconfig (real-static-start-installed-name): New.
(pic-default): Updated for --enable-static-pie.
(pie-default): New for --enable-static-pie.
(default-pie-ldflag): Likewise.
(+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F))
with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)).
Replace $(static-start-installed-name) with
$(real-static-start-installed-name).
(+prectorT): Updated for --enable-static-pie.
(+postctorT): Likewise.
(CFLAGS-.o): Add $(pie-default).
(CFLAGS-.op): Likewise.
* NEWS: Mention --enable-static-pie.
* config.h.in (ENABLE_STATIC_PIE): New.
* configure.ac (--enable-static-pie): New configure option.
(have-no-dynamic-linker): New LIBC_CONFIG_VAR.
(have-static-pie): Likewise.
Enable static PIE if linker supports --no-dynamic-linker.
(ENABLE_STATIC_PIE): New AC_DEFINE.
(enable-static-pie): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* csu/Makefile (omit-deps): Add r$(start-installed-name) and
gr$(start-installed-name) for --enable-static-pie.
(extra-objs): Likewise.
(install-lib): Likewise.
(extra-objs): Add static-reloc.o and static-reloc.os
($(objpfx)$(start-installed-name)): Also depend on
$(objpfx)static-reloc.o.
($(objpfx)r$(start-installed-name)): New.
($(objpfx)g$(start-installed-name)): Also depend on
$(objpfx)static-reloc.os.
($(objpfx)gr$(start-installed-name)): New.
* csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie
in libc.a.
* csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to
initimage.
* csu/static-reloc.c: New file.
* elf/Makefile (routines): Add dl-reloc-static-pie.
(elide-routines.os): Likewise.
(DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed.
(tst-tls1-static-non-pie-no-pie): New.
* elf/dl-reloc-static-pie.c: New file.
* elf/dl-support.c (_dl_get_dl_main_map): New function.
* elf/dynamic-link.h (ELF_DURING_STARTUP): Also check
STATIC_PIE_BOOTSTRAP.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* gmon/Makefile (tests): Add tst-gmon-static-pie.
(tests-static): Likewise.
(DEFAULT-LDFLAGS-tst-gmon-static): Removed.
(tst-gmon-static-no-pie): New.
(CFLAGS-tst-gmon-static-pie.c): Likewise.
(CRT-tst-gmon-static-pie): Likewise.
(tst-gmon-static-pie-ENV): Likewise.
(tests-special): Likewise.
($(objpfx)tst-gmon-static-pie.out): Likewise.
(clean-tst-gmon-static-pie-data): Likewise.
($(objpfx)tst-gmon-static-pie-gprof.out): Likewise.
* gmon/tst-gmon-static-pie.c: New file.
* manual/install.texi: Document --enable-static-pie.
* sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New.
(_dl_get_dl_main_map): Likewise.
* sysdeps/i386/configure.ac: Check if linker supports static PIE.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default).
(ASFLAGS-.op): Likewise.
On Skylake, bench-sinf reports performance improvement:
Before After Improvement
max 153.996 100.094 54%
min 8.546 6.852 25%
mean 18.1223 11.802 54%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_sinf-sse2 and s_sinf-fma.
(CFLAGS-s_sinf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_sinf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_sinf-sse2.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sinf.c: Likewise.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes x86_64 libm function implementations use
libm_alias_float to define function aliases, or libm_alias_float_other
where the main name is defined with versioned_symbol.
Tested with the glibc testsuite for x86_64, and tested with
build-many-glibcs.py for all its x86_64 configurations that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/x86_64/fpu/multiarch/e_exp2f.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/e_expf.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/e_log2f.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/e_logf.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/e_powf.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/s_ceilf.c: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_floorf.c: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_fmaf.c: Include
<libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_nearbyintf.c: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_rintf.c: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_truncf.c: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_copysignf.S: Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_cosf.S: Include <libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_fabsf.c: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_fmaxf.S: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_fminf.S: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_llrintf.S: Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
[!__ILP32__] (lrintf): Likewise.
* sysdeps/x86_64/fpu/s_sincosf.S: Include <libm-alias-float.h>.
(sincosf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_sinf.S: Include <libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/x86_64/x32/fpu/s_lrintf.S: Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes x86_64 libm function implementations use
libm_alias_double to define function aliases.
Tested with the glibc testsuite for x86_64, and tested with
build-many-glibcs.py for all its x86_64 configurations that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/x86_64/fpu/multiarch/s_atan.c: Include
<libm-alias-double.h>.
(atan): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_ceil.c: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_floor.c: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_fma.c: Include
<libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_nearbyint.c: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_rint.c: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_sin.c: Include
<libm-alias-double.h>.
(sin): Define using libm_alias_double.
(cos): Likewise.
* sysdeps/x86_64/fpu/multiarch/s_tan.c: Include
<libm-alias-double.h>.
(tan): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_trunc.c: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_copysign.S: Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_fabs.c: Include <libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_fmax.S: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_fmin.S: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_llrint.S: Include <libm-alias-double.h>.
(llrint): Define using libm_alias_double.
[!__ILP32__] (lrint): Likewise.
* sysdeps/x86_64/x32/fpu/s_lrint.S: Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
This patch continues the preparation for additional _FloatN / _FloatNx
function aliases by using libm_alias_ldouble for sysdeps/x86_64/fpu
long double functions, so that they can have _Float64x aliases added
in future.
Tested for x86_64, including build-many-glibcs.py tests that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/x86_64/fpu/e_expl.S: Include <libm-alias-ldouble.h>.
[USE_AS_EXPM1L] (expm1l): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_ceill.S: Include <libm-alias-ldouble.h>.
(ceill): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_copysignl.S: Include
<libm-alias-ldouble.h>.
(copysignl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_fabsl.S: Include <libm-alias-ldouble.h>.
(fabsl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_floorl.S: Include <libm-alias-ldouble.h>.
(floorl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_fmaxl.S: Include <libm-alias-ldouble.h>.
(fmaxl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_fminl.S: Include <libm-alias-ldouble.h>.
(fminl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_llrintl.S: Include <libm-alias-ldouble.h>.
(llrintl): Define using libm_alias_ldouble.
(lrintl): Likewise.
* sysdeps/x86_64/fpu/s_nearbyintl.S: Include
<libm-alias-ldouble.h>.
(nearbyintl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_truncl.S: Include <libm-alias-ldouble.h>.
(truncl): Define using libm_alias_ldouble.
* sysdeps/x86_64/x32/fpu/s_lrintl.S: Include
<libm-alias-ldouble.h>.
(lrintl): Define using libm_alias_ldouble.
This patch adds a new build test to check for internal fields
offsets for user visible internal field. Although currently
the only field which is statically initialized to a non zero value
is pthread_mutex_t.__data.__kind value, the tests also check the
offset of __kind, __spins, __elision (if supported), and __list
internal member. A internal header (pthread-offset.h) is added
to each major ABI with the reference value.
Checked on x86_64-linux-gnu and with a build check for all affected
ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu,
mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu,
s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu,
sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32,
tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32).
* nptl/pthreadP.h (ASSERT_PTHREAD_STRING,
ASSERT_PTHREAD_INTERNAL_OFFSET): New macro.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time
checks for internal pthread_mutex_t offsets.
* sysdeps/aarch64/nptl/pthread-offsets.h
(__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET,
__PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET,
__PTHREAD_MUTEX_LIST_OFFSET): New macro.
* sysdeps/alpha/nptl/pthread-offsets.h: Likewise.
* sysdeps/arm/nptl/pthread-offsets.h: Likewise.
* sysdeps/hppa/nptl/pthread-offsets.h: Likewise.
* sysdeps/i386/nptl/pthread-offsets.h: Likewise.
* sysdeps/ia64/nptl/pthread-offsets.h: Likewise.
* sysdeps/m68k/nptl/pthread-offsets.h: Likewise.
* sysdeps/microblaze/nptl/pthread-offsets.h: Likewise.
* sysdeps/mips/nptl/pthread-offsets.h: Likewise.
* sysdeps/nios2/nptl/pthread-offsets.h: Likewise.
* sysdeps/powerpc/nptl/pthread-offsets.h: Likewise.
* sysdeps/s390/nptl/pthread-offsets.h: Likewise.
* sysdeps/sh/nptl/pthread-offsets.h: Likewise.
* sysdeps/sparc/nptl/pthread-offsets.h: Likewise.
* sysdeps/tile/nptl/pthread-offsets.h: Likewise.
* sysdeps/x86_64/nptl/pthread-offsets.h: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add a new header file, sysdeps/x86/sysdep.h, for common assembly code
macros between i386 and x86-64. Tested on i686 and x86-64. There are
no differences in outputs of "readelf -a" and "objdump -dw" on all glibc
shared objects before and after the patch.
* sysdeps/i386/sysdep.h: Include <sysdeps/x86/sysdep.h> instead
of <sysdeps/generic/sysdep.h>.
(ALIGNARG): Removed.
(ASM_SIZE_DIRECTIVE): Likewise.
(ENTRY): Likewise.
(END): Likewise.
(ENTRY_CHK): Likewise.
(END_CHK): Likewise.
(syscall_error): Likewise.
(mcount): Likewise.
(PSEUDO_END): Likewise.
(L): Likewise.
(atom_text_section): Likewise.
* sysdeps/x86/sysdep.h: New file.
* sysdeps/x86_64/sysdep.h: Include <sysdeps/x86/sysdep.h> instead
of <sysdeps/generic/sysdep.h>.
(ALIGNARG): Removed.
(ASM_SIZE_DIRECTIVE): Likewise.
(ENTRY): Likewise.
(END): Likewise.
(ENTRY_CHK): Likewise.
(END_CHK): Likewise.
(syscall_error): Likewise.
(mcount): Likewise.
(PSEUDO_END): Likewise.
(L): Likewise.
(atom_text_section): Likewise.
In _dl_runtime_resolve, use fxsave/xsave/xsavec to preserve all vector,
mask and bound registers. It simplifies _dl_runtime_resolve and supports
different calling conventions. ld.so code size is reduced by more than
1 KB. However, use fxsave/xsave/xsavec takes a little bit more cycles
than saving and restoring vector and bound registers individually.
Latency for _dl_runtime_resolve to lookup the function, foo, from one
shared library plus libc.so:
Before After Change
Westmere (SSE)/fxsave 345 866 151%
IvyBridge (AVX)/xsave 420 643 53%
Haswell (AVX)/xsave 713 1252 75%
Skylake (AVX+MPX)/xsavec 559 719 28%
Skylake (AVX512+MPX)/xsavec 145 272 87%
Ryzen (AVX)/xsavec 280 553 97%
This is the worst case where portion of time spent for saving and
restoring registers is bigger than majority of cases. With smaller
_dl_runtime_resolve code size, overall performance impact is negligible.
On IvyBridge, differences in build and test time of binutils with lazy
binding GCC and binutils are noises. On Westmere, differences in
bootstrap and "makc check" time of GCC 7 with lazy binding GCC and
binutils are also noises.
[BZ #21265]
* sysdeps/x86/cpu-features-offsets.sym (XSAVE_STATE_SIZE_OFFSET):
New.
* sysdeps/x86/cpu-features.c: Include <libc-pointer-arith.h>.
(get_common_indeces): Set xsave_state_size, xsave_state_full_size
and bit_arch_XSAVEC_Usable if needed.
(init_cpu_features): Remove bit_arch_Use_dl_runtime_resolve_slow
and bit_arch_Use_dl_runtime_resolve_opt.
* sysdeps/x86/cpu-features.h (bit_arch_Use_dl_runtime_resolve_opt):
Removed.
(bit_arch_Use_dl_runtime_resolve_slow): Likewise.
(bit_arch_Prefer_No_AVX512): Updated.
(bit_arch_MathVec_Prefer_No_AVX512): Likewise.
(bit_arch_XSAVEC_Usable): New.
(STATE_SAVE_OFFSET): Likewise.
(STATE_SAVE_MASK): Likewise.
[__ASSEMBLER__]: Include <cpu-features-offsets.h>.
(cpu_features): Add xsave_state_size and xsave_state_full_size.
(index_arch_Use_dl_runtime_resolve_opt): Removed.
(index_arch_Use_dl_runtime_resolve_slow): Likewise.
(index_arch_XSAVEC_Usable): New.
* sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)):
Support XSAVEC_Usable. Remove Use_dl_runtime_resolve_slow.
* sysdeps/x86_64/Makefile (tst-x86_64-1-ENV): New if tunables
is enabled.
* sysdeps/x86_64/dl-machine.h (elf_machine_runtime_setup):
Replace _dl_runtime_resolve_sse, _dl_runtime_resolve_avx,
_dl_runtime_resolve_avx_slow, _dl_runtime_resolve_avx_opt,
_dl_runtime_resolve_avx512 and _dl_runtime_resolve_avx512_opt
with _dl_runtime_resolve_fxsave, _dl_runtime_resolve_xsave and
_dl_runtime_resolve_xsavec.
* sysdeps/x86_64/dl-trampoline.S (DL_RUNTIME_UNALIGNED_VEC_SIZE):
Removed.
(DL_RUNTIME_RESOLVE_REALIGN_STACK): Check STATE_SAVE_ALIGNMENT
instead of VEC_SIZE.
(REGISTER_SAVE_BND0): Removed.
(REGISTER_SAVE_BND1): Likewise.
(REGISTER_SAVE_BND3): Likewise.
(REGISTER_SAVE_RAX): Always defined to 0.
(VMOV): Removed.
(_dl_runtime_resolve_avx): Likewise.
(_dl_runtime_resolve_avx_slow): Likewise.
(_dl_runtime_resolve_avx_opt): Likewise.
(_dl_runtime_resolve_avx512): Likewise.
(_dl_runtime_resolve_avx512_opt): Likewise.
(_dl_runtime_resolve_sse): Likewise.
(_dl_runtime_resolve_sse_vex): Likewise.
(USE_FXSAVE): New.
(_dl_runtime_resolve_fxsave): Likewise.
(USE_XSAVE): Likewise.
(_dl_runtime_resolve_xsave): Likewise.
(USE_XSAVEC): Likewise.
(_dl_runtime_resolve_xsavec): Likewise.
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve_avx512):
Removed.
(_dl_runtime_resolve_avx512_opt): Likewise.
(_dl_runtime_resolve_avx): Likewise.
(_dl_runtime_resolve_avx_opt): Likewise.
(_dl_runtime_resolve_sse): Likewise.
(_dl_runtime_resolve_sse_vex): Likewise.
(_dl_runtime_resolve_fxsave): New.
(_dl_runtime_resolve_xsave): Likewise.
(_dl_runtime_resolve_xsavec): Likewise.
This code is used in non-PIE static executable and static PIE. It checks
if _DYNAMIC is undefined before using it to compute load address. But
not all targets can convert access _DYNAMIC via GOT, which needs dynamic
relocation, to PC-relative at link-time.
* sysdeps/i386/dl-machine.h (elf_machine_load_address): Don't
allow undefined _DYNAMIC in PIE libc.a.
* sysdeps/x86_64/dl-machine.h (elf_machine_load_address):
Likewse.
This patch converts the dbl-64 implementations of atan and tan into
weak aliases of __atan and __tan, in preparation for making them use
libm_alias_double. Consequent changes are made to the x86_64
multiarch versions wrapping round them (with the dbl-64 functions,
like other such functions, being made not to define their aliases at
all if __atan or __tan are defined as macros by an including file).
Tested for x86_64, and with build-many-glibcs.py.
* sysdeps/ieee754/dbl-64/s_atan.c (atan): Rename to __atan and
define as weak alias of __atan. Do not define any aliases if
[__atan].
[NO_LONG_DOUBLE] (__atanl): Define as strong alias of __atan.
[NO_LONG_DOUBLE] (atanl): Define as weak alias of __atanl.
* sysdeps/ieee754/dbl-64/s_tan.c (tan): Rename to __tan and define
as weak alias of __tan. Do not define any aliases if [__tan].
[NO_LONG_DOUBLE] (__tanl): Define as strong alias of __tan.
[NO_LONG_DOUBLE] (tanl): Define as weak alias of __tanl.
* sysdeps/x86_64/fpu/multiarch/s_atan-avx.c (atan): Rename to
__atan.
* sysdeps/x86_64/fpu/multiarch/s_atan-fma.c (atan): Likewise.
* sysdeps/x86_64/fpu/multiarch/s_atan-fma4.c (atan): Likewise.
* sysdeps/x86_64/fpu/multiarch/s_atan.c (atan): Rename to __atan
and define as weak alias of __atan.
* sysdeps/x86_64/fpu/multiarch/s_tan-avx.c (tan): Rename to
__atan.
* sysdeps/x86_64/fpu/multiarch/s_tan-fma.c (tan): Likewise.
* sysdeps/x86_64/fpu/multiarch/s_tan-fma4.c (tan): Likewise.
* sysdeps/x86_64/fpu/multiarch/s_tan.c (tan): Rename to __tan and
define as weak alias of __tan.
The new generic expf and exp2f code don't need wrappers any more, they
set errno inline, so only use the wrappers on targets that need it.
(If the wrapper is needed, then the top level wrapper code is included,
otherwise empty w_exp*f.c is used to suppress the wrapper.)
A powerpc64 expf implementation includes the expf c code directly which
needed some changes.
* sysdeps/ieee754/flt-32/e_exp2f.c (__exp2f): Define without wrapper.
* sysdeps/ieee754/flt-32/e_expf.c (__expf): Likewise
* sysdeps/ieee754/flt-32/w_exp2f.c: New file.
* sysdeps/ieee754/flt-32/w_expf.c: New file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf-ppc64.c: Update for
the new expf code.
* sysdeps/powerpc/powerpc64/fpu/multiarch/w_expf.c: New file.
* sysdeps/powerpc/powerpc64/power8/fpu/w_expf.c: New file.
* sysdeps/m68k/m680x0/fpu/w_exp2f.c: New file.
* sysdeps/m68k/m680x0/fpu/w_expf.c: New file.
* sysdeps/i386/fpu/w_exp2f.c: New file.
* sysdeps/i386/fpu/w_expf.c: New file.
* sysdeps/i386/i686/fpu/multiarch/w_expf.c: New file.
* sysdeps/x86_64/fpu/w_expf.c: New file.
When --enable-static-pie is used to build static PIE, _DYNAMIC is used
to compute the load address of static PIE. But _DYNAMIC is undefined
when creating static executable. This patch makes _DYNAMIC weak in PIE
libc.a so that it can be undefined.
* sysdeps/i386/dl-machine.h (elf_machine_load_address): Allow
undefined _DYNAMIC in PIE libc.a.
* sysdeps/x86_64/dl-machine.h (elf_machine_load_address):
Likewse.
This patch adds SSE4.1 versions of trunc and truncf, using the roundsd
/ roundss instructions, similar to the versions of ceil, floor, rint
and nearbyint functions we already have. In my testing with the glibc
benchtests these are about 30% faster than the C versions for double,
20% faster for float.
Tested for x86_64.
[BZ #20142]
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_trunc-c, s_truncf-c, s_trunc-sse4_1 and s_truncf-sse4_1.
* sysdeps/x86_64/fpu/multiarch/s_trunc-c.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_trunc-sse4_1.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_trunc.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_truncf-c.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_truncf-sse4_1.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_truncf.c: Likewise.
AVX512 functions in mathvec are used on machines with AVX512. An AVX2
wrapper is also provided and it can be used when the AVX512 version
isn't profitable. MathVec_Prefer_No_AVX512 is addded to cpu-features.
If glibc.tune.hwcaps=MathVec_Prefer_No_AVX512 is set in GLIBC_TUNABLES
environment variable, the AVX2 wrapper will be used.
Tested on x86-64 machines with and without AVX512. Also verified
glibc.tune.hwcaps=MathVec_Prefer_No_AVX512 on AVX512 machine.
[BZ #21967]
* sysdeps/x86/cpu-features.h (bit_arch_MathVec_Prefer_No_AVX512):
New.
(index_arch_MathVec_Prefer_No_AVX512): Likewise.
* sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)):
Handle MathVec_Prefer_No_AVX512.
* sysdeps/x86_64/fpu/multiarch/ifunc-mathvec-avx512.h
(IFUNC_SELECTOR): Return AVX2 version if MathVec_Prefer_No_AVX512
is set.
Before glibc 2.26, ld.so set dl_platform to "x86_64" and searched the
"x86_64" subdirectory when loading a shared library. ld.so in glibc
2.26 was changed to set dl_platform to "haswell" or "xeon_phi", based
on supported ISAs. This led to shared library loading failure for
shared libraries placed under the "x86_64" subdirectory.
This patch adds "x86_64" to x86-64 dl_hwcap so that ld.so will always
search the "x86_64" subdirectory when loading a shared library.
NB: We can't set x86-64 dl_platform to "x86-64" since ld.so will skip
the "haswell" and "xeon_phi" subdirectories on "haswell" and "xeon_phi"
machines.
Tested on i686 and x86-64.
[BZ #22093]
* sysdeps/x86/cpu-features.c (init_cpu_features): Initialize
GLRO(dl_hwcap) to HWCAP_X86_64 for x86-64.
* sysdeps/x86/dl-hwcap.h (HWCAP_COUNT): Updated.
(HWCAP_IMPORTANT): Likewise.
(HWCAP_X86_64): New enum.
(HWCAP_X86_AVX512_1): Updated.
* sysdeps/x86/dl-procinfo.c (_dl_x86_hwcap_flags): Add "x86_64".
* sysdeps/x86_64/Makefile (tests): Add tst-x86_64-1.
(modules-names): Add x86_64/tst-x86_64mod-1.
(LDFLAGS-tst-x86_64mod-1.so): New.
($(objpfx)tst-x86_64-1): Likewise.
($(objpfx)x86_64/tst-x86_64mod-1.os): Likewise.
(tst-x86_64-1-clean): Likewise.
* sysdeps/x86_64/tst-x86_64-1.c: New file.
* sysdeps/x86_64/tst-x86_64mod-1.c: Likewise.
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking). The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.
Tested for x86_64, and with build-many-glibcs.py.
* manual/math.texi (pow10): Do not document.
(pow10f): Likewise.
(pow10l): Likewise.
* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
* math/libm-test-exp10.inc (pow10_test): Remove.
(do_test): Do not call pow10.
* math/w_exp10_compat.c (pow10): Make into compat symbol.
[NO_LONG_DOUBLE] (pow10l): Likewise.
* math/w_exp10f_compat.c (pow10f): Likewise.
* math/w_exp10l_compat.c (pow10l): Likewise.
* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
(pow10): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
(pow10f): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
(pow10l): Make into compat symbol.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
pow10.
(CFLAGS-nldbl-pow10.c): Remove variable..
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
Undefine and redefine.
(pow10l): Make into compat symbol.
* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/nios2/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
