I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
When using a timezone file with a truncated starting time,
generated by the zic in IANA tzcode-2021d a.k.a. tzlib-2021d
(also in tzlib-2021e; current as of this writing), glibc
asserts in __tzfile_read (on e.g. tzset() for this file) and
you may find lines matching "tzfile.c:435: __tzfile_read:
Assertion `num_types == 1' failed" in your syslog.
One example of such a file is the tzfile for Asuncion
generated by tzlib-2021e as follows, using the tzlib-2021e zic:
"zic -d DEST -r @1546300800 -L /dev/null -b slim
SOURCE/southamerica". Note that in its type 2 header, it has
two entries in its "time-types" array (types), but only one
entry in its "transition types" array (type_idxs).
This is valid and expected already in the published RFC8536, and
not even frowned upon: "Local time for timestamps before the
first transition is specified by the first time type (time type
0)" ... "every nonzero local time type index SHOULD appear at
least once in the transition type array". Note the "nonzero ...
index". Until the 2021d zic, index 0 has been shared by the
first valid transition but with 2021d it's separate, set apart
as a placeholder and only "implicitly" indexed. (A draft update
of the RFC mandates that the entry at index 0 is a placeholder
in this case, hence can no longer be shared.)
* time/tzfile.c (__tzfile_read): Don't assert when no transitions
are found.
Co-authored-by: Christopher Wong <Christopher.Wong@axis.com>
* time/tzfile.c (__tzfile_compute): Fix unlikely off-by-one bug
that accessed before start of an array when an oddball-but-valid
TZif file was queried with an unusual time_t value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For the legacy ABI with supports 32-bit time_t it calls the 64-bit
time directly, since the LFS symbols calls the 64-bit time_t ones
internally.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
This patch updates files coming from tzcode to tzcode 2020a.
This is mostly for better support for Internet RFC 8536, by adding
support to zic for the Expires line (new to tzcode 2020a), the -b
option (new to 2019b) and the -r option (new to 2019a).
One trivial change to other glibc was needed.
* time/tzfile.c (__tzfile_read): Adjust to tzcode private.h renaming.
* timezone/private.h, timezone/tzfile.h, timezone/version:
* timezone/zdump.c, timezone/zic.c: Update from tzcode 2020a.
By ordering the suballocations by decreasing alignment, alignment
gaps can be avoided.
Also use __glibc_unlikely for reading the transitions and type
indexes. In the 8-byte case, two reads are now needed because the
transitions and type indexes are no longer adjacent. The separate
call to __fread_unlocked does not matter from a performance point of
view because __tzfile_read is only invoked rarely.
The computation of tzspec_len is moved in front of the total_size
computation, so that the allocation size computation and the
suballocations are next to each other. Also add an assert that
tzspec_len is positive when it is actually used later.
The GMT offset can be outside the range of a 16-bit int type, which
is presumably the reason why long int was used in struct tm. We
cannot change struct tm, but we can change the internal type for
the offset.
Now that __time64_t exists, we can switch internal function
__tz_convert from 32-bit to 64-bit time. This involves switching
some other internal functions as well, namely __tz_compute and
__offtime.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__tz_compute): Replace time_t with __time64_t.
(__tz_convert): Replace time_t* with __time64_t.
(__offtime): Replace time_t* with __time64_t.
* time/gmtime.c
(__gmtime_r): Adjust call to __tz_convert.
(gmtime): Likewise.
* time/localtime.c
(__localtime_r): Likewise.
(localtime): Likewise.
* time/offtime.c: Replace time_t with __time64_t.
* time/tzset.c: Likewise.
glibc support for 64-bit time_t on 32-bit architectures
will involve:
- Using 64-bit times inside glibc, with conversions
to and from 32-bit times taking place as necessary
for interfaces using such times.
- Adding 64-bit-time support in the glibc public API.
This support should be dynamic, i.e. glibc should
provide both 32-bit and 64-bit implementations and
let user code choose at compile time whether to use
the 32-bit or 64-bit interfaces.
This requires a glibc-internal name for a type for times
that are always 64-bit.
Based on __TIMESIZE, a new macro is defined, __TIME64_T_TYPE,
which is always the right __*_T_TYPE to hold a 64-bit-time.
__TIME64_T_TYPE equals __TIME_T_TYPE if __TIMESIZE equals 64
and equals __SQUAD_T_TYPE otherwise.
__time64_t can then replace uses of internal_time_t.
This patch was tested by running 'make check' on branch
master then applying this patch and its predecessor and
running 'make check' again, and checking that both 'make
check' yield identical results. This was done on
x86_64-linux-gnu and i686-linux-gnu.
* bits/time64.h: New file.
* include/time.h: Replace internal_time_t with __time64_t.
* posix/bits/types (__time64_t): Add.
* stdlib/Makefile: Add bits/time64.h to includes.
* time/tzfile.c: Replace internal_time_t with __time64_t.
Continuing the fixes for linknamespace and localplt test failures with
-Os that arise from functions not being inlined in that case, this
patch fixes such failures for getc_unlocked.
__getc_unlocked already exists; this patch makes it explicitly hidden,
calls it where needed for namespace reasons, adds an inline function
for it when inline functions are used and adds libc_hidden_proto /
libc_hidden_weak for getc_unlocked.
Tested for x86_64 (both without -Os to make sure that case continues
to work, and with -Os to make sure all the relevant linknamespace and
localplt test failures are resolved). Because of other such failures
that remain after this patch, neither of the bugs can yet be closed.
[BZ #15105]
[BZ #19463]
* libio/getc_u.c (getc_unlocked): Use libc_hidden_weak.
* include/stdio.h [!_ISOMAC] (__getc_unlocked): Use
attribute_hidden, and define inline if [__USE_EXTERN_INLINES].
[!_ISOMAC] (getc_unlocked): Use libc_hidden_proto.
* misc/getttyent.c (__getttyent): Call __getc_unlocked instead of
getc_unlocked.
* time/tzfile.c (__tzfile_read): Likewise.
If the TZDEFRULES file was used to set the DST rules when $TZ didn't
provide any we need to make sure that the next time it is used we
recompute everything as __tzfile_default changes some setting from what is
provided by TZDEFRULES.
tzfile.c is brought in by various ISO C functions, but calls fileno,
fread_unlocked and ftello, which are not ISO C functions. This patch
adds names __fileno, __fread_unlocked and __ftello for those
functions, making tzfile.c use those new names.
Note: there are various uses of fileno elsewhere in glibc that I
didn't change, although it may turn out that some of those also need
to use __fileno.
Tested for x86_64 with the glibc testsuite. Changed line numbers in
tzfile.c cause changes in assertions, and for some reason this ends up
with different instruction choice and register allocation, affecting
the size of __tzfile_read and so making comparison of disassembly for
libc.so problematic.
[BZ #17583]
* libio/fileno.c (fileno): Rename to __fileno and define as weak
alias of __fileno. Use libc_hidden_weak.
(__fileno): Use libc_hidden_def.
[weak_alias] (fileno_unlocked): Define as weak alias of __fileno.
* libio/ftello.c (ftello): Rename to __ftello and define as weak
alias of __ftello.
[__OFF_T_MATCHES_OFF64_T] (ftello64): Define as weak alias of
__ftello.
* libio/iofread.c [weak_alias && !_IO_MTSAFE_IO]
(__fread_unlocked): Define as strong alias of _IO_fread. Use
libc_hidden_def.
(fread_unlocked): Don't use libc_hidden_ver.
* libio/iofread_u.c (fread_unlocked): Rename to __fread_unlocked
and define as weak alias of __fread_unlocked. Don't use
libc_hidden_def.
(__fread_unlocked): Use libc_hidden_def.
* include/stdio.h (__fileno): Declare. Use libc_hidden_proto.
(ftello): Don't use libc_hidden_proto.
(__ftello): Declare. Use libc_hidden_proto.
(fread_unlocked): Don't use libc_hidden_proto.
(__fread_unlocked): Declare. Use libc_hidden_proto.
* time/tzfile.c (__tzfile_read): Use __fileno, __fread_unlocked
and __ftello instead of fileno, fread_unlocked and ftello.
2007-10-16 Ulrich Drepper <drepper@redhat.com>
* time/tzfile.c (__tzfile_read): Take extra memory requested by caller
into account when copying TZ string.
* time/tzset.c (tzset_internal): Break TZ string parsing out into
__tzset_parse_tz and updating of daylight, timezone, tzname into
update_vars.
(__tz_compute): Renamed from tz_compute. Take additional parameters.
(__tz_convert): Updating of tm_isdst, tm_zone, and tm_gmtoff now
happens in __tz_compute.
* time/tzfile.c (__tzfile_read): Also read TZ string.
(find_transition): Fold into __tzfile_compute.
(__tzfile_compute): For times beyond the last transition try to
use the TZ string.
* timezone/tst-timezone.c: Information in daylight and tzname does
change for Asia/Tokyo timezone with more concrete information.
Remove the test.
* include/stdio.h: Add libc_hidden_proto for ftello.
* libio/ftello.c: Add libc_hidden_def.
