* sysdeps/unix/bsd/getpt.c (__getpt): Add oflag parameter, pass
it to the _open call and rename to...
(__bsd_openpt): ... new function.
(__getpt): Reimplement on top of __bsd_openpt.
(__posix_openpt): Replace stub with implementation on top of __bsd_openpt.
(posix_openpt): Remove stub warning.
It refactor how signals are defined by each architecture. Instead of
include a generic header (bits/signum-generic.h) and undef non-default
values in an arch specific header (bits/signum.h) the new scheme uses a
common definition (bits/signum-generic.h) and each architectures add
its specific definitions on a new header (bits/signum-arch.h).
For Linux it requires copy some system default definitions to alpha,
hppa, and sparc. They are historical values and newer ports uses
the generic Linux signum-arch.h.
For Hurd the BSD signum is removed and moved to a new header (it is
used currently only on Hurd).
Checked on a build against all affected ABIs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The POSIX implementation is used as default and both BSD and Linux
version are removed. It simplifies the implementation for
architectures that do not provide either __NR_waitpid or
__NR_wait4.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
ftime is an obsolete variation on gettimeofday, offering only
millisecond time resolution; it was probably a system call in ooold
versions of BSD Unix. For historic reasons, we had three
implementations of it. These are all consolidated into time/ftime.c,
and then the function is deprecated.
For some reason, the implementation of ftime in terms of gettimeofday
was rounding rather than truncating microseconds to milliseconds. In
all the other places where we use a higher-resolution time function to
implement a lower-resolution one, we truncate. ftime is changed to
match, just for tidiness' sake.
Like gettimeofday, ftime tries to report the time zone, and using that
information is always a bug. This patch dummies out the reported
timezone information; the timezone and dstflag fields of the
returned "struct timeb" will always be zero.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, and powerpc-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Hide internal __tcgetattr function to allow direct access within libc.so
and libc.a without using GOT nor PLT.
[BZ #18822]
* include/termios.h (__tcgetattr): Add libc_hidden_proto.
* sysdeps/unix/bsd/tcgetattr.c (__tcgetattr): Add
libc_hidden_def.
* sysdeps/unix/sysv/linux/tcgetattr.c (__tcgetattr): Likewise.
* termios/tcgetattr.c (__tcgetattr): Likewise.
`revoke' is MISC only, it should not be exposed along `unlockpt' which is
XOPEN.
* include/unistd.h (__revoke): New declaration.
* misc/revoke.c (revoke): Rename to __revoke, and redefine as weak
alias.
* sysdeps/mach/hurd/revoke.c (revoke): Likewise.
* sysdeps/unix/bsd/unlockpt.c (unlockpt): Use __revoke instead of
revoke.
Many of the things defined by bits/signum.h are invariant across all
supported operating systems. This patch factors out all of them to a
new header bits/signum-generic.h, which each bits/signum.h will include
and then override whichever things need adjustment. Normally that will
mean, at most, adding or changing a few signal numbers.
A user-visible side effect is that the obsolete signal constant SIGUNUSED
(which is an alias for SIGSYS on all platforms that define it) is no
longer exposed by any version of bits/signum.h.
A side effect only relevant to glibc hackers is that _NSIG is now defined
in terms of __SIGRTMAX, instead of the other way around. This is because
__SIGRTMAX varies from platform to platform, but _NSIG==__SIGRTMAX+1 is
true universally. If your platform doesn't support realtime signals,
leave __SIGRTMAX equal to __SIGRTMIN.
I also added a Linux-specific test to make sure that our signal constants
match the ones in <asm/signal.h>, since we can't use that header (it's
not even vaguely namespace-clean).
* bits/signum-generic.h: Renamed from bits/signum.h.
Add proper multiple include guard and misuse check.
Define __SIGRTMIN = __SIGRTMAX = 32, and define _NSIG = __SIGRTMAX+1.
Move definition of SIGIO to "archaic names for compatibility" section.
* bits/signum.h: New file which just includes bits/signum-generic.h.
* sysdeps/unix/bsd/bits/signum.h
* sysdeps/unix/sysv/linux/bits/signum.h
* sysdeps/unix/sysv/linux/alpha/bits/signum.h
* sysdeps/unix/sysv/linux/hppa/bits/signum.h
* sysdeps/unix/sysv/linux/mips/bits/signum.h
* sysdeps/unix/sysv/linux/sparc/bits/signum.h
Just include <bits/signum-generic.h> and then add or adjust
signal constants. Do not define SIGUNUSED, SIGRTMIN, or SIGRTMAX.
* signal/Makefile: Install bits/signum-generic.h.
* signal/signal.h: Define SIGRTMIN and SIGRTMAX here.
* sysdeps/generic/siglist.h: SIGSYS and SIGWINCH are
universal. Prefer SIGPOLL to SIGIO. Simplify #ifdeffage.
* sysdeps/unix/sysv/linux/tst-signal-numbers.sh: New test.
* sysdeps/unix/sysv/linux/Makefile: Run it.
Various bits/signum.h headers define SIG_HOLD if __USE_UNIX98. That
should be __USE_XOPEN, as this macro is in XPG4. This patch fixes the
conditionals accordingly. Because of other header bugs, this does not
allow any XFAILs to be removed (however, the XPG4/signal.h/conform
XFAIL only depends on a few such straightforward header bugs, not on
the more complicated to fix ucontext_t issues, as ucontext_t isn't
included in signal.h in XPG4).
Tested for x86_64.
[BZ #21538]
* bits/signum.h (SIG_HOLD): Define if [__USE_XOPEN], not
[__USE_UNIX98].
* sysdeps/unix/bsd/bits/signum.h (SIG_HOLD): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/signum.h (SIG_HOLD):
Likewise.
* sysdeps/unix/sysv/linux/bits/signum.h (SIG_HOLD): Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/signum.h (SIG_HOLD): Likewise.
* sysdeps/unix/sysv/linux/mips/bits/signum.h (SIG_HOLD): Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/signum.h (SIG_HOLD):
Likewise.
This avoids aliasing issues with GCC 6 in -fno-strict-aliasing
mode. (With implicit padding, not all data is copied.)
This change makes it explicit that struct sockaddr_storage is
only 126 bytes large on m68k (unlike elsewhere, where we end up
with the requested 128 bytes). The new test case makes sure that
this does not happen on other architectures.
The overloading approach in the W* macros was incompatible with
integer expressions of a type different from int. Applications
using union wait and these macros will have to migrate to the
POSIX-specified int status type.
Continuing the removal of unused __libc_* function names, this patch
removes the __libc_waitpid name.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch; __waitpid, which is exported from
shared libc, changes from weak to strong on some configurations, which
is of no significance).
* include/sys/wait.h (__libc_waitpid): Remove declaration.
* posix/waitpid.c (__libc_waitpid): Rename to __waitpid.
(__waitpid): Don't define as alias. Use libc_hidden_def not
libc_hidden_weak.
(waitpid): Define as alias of __waitpid.
* sysdeps/unix/bsd/waitpid.c (__libc_waitpid): Rename to
__waitpid.
(__waitpid): Don't define as alias. Use libc_hidden_def not
libc_hidden_weak.
(waitpid): Define as alias of __waitpid.
* sysdeps/unix/sysv/linux/i386/syscalls.list (waitpid): Remove
__libc_waitpid alias.
* sysdeps/unix/sysv/linux/m68k/syscalls.list (waitpid): Likewise.
* sysdeps/unix/sysv/linux/powerpc/syscalls.list (waitpid):
Likewise.
* sysdeps/unix/sysv/linux/sh/syscalls.list (waitpid): Likewise.
* sysdeps/unix/sysv/linux/sparc/syscalls.list (waitpid): Likewise.
* sysdeps/unix/sysv/linux/tile/waitpid.S (__libc_waitpid): Remove
alias.
* sysdeps/unix/sysv/linux/waitpid.c (__libc_waitpid): Rename to
__waitpid.
(__waitpid): Don't define as alias. Use libc_hidden_def not
libc_hidden_weak.
(waitpid): Define as alias of __waitpid.
As discussed in
<https://sourceware.org/ml/libc-alpha/2012-04/msg00840.html> and
<https://sourceware.org/ml/libc-alpha/2012-04/msg00989.html>, it seems
appropriate to flatten sysdeps/unix/bsd/bsd4.4 into sysdeps/unix/bsd.
The bulk of the patch is just moving files. The only other changes
are: update paths in sysdeps/mach/hurd/Implies and
sysdeps/unix/sysv/linux/wait3.c; merge the two syscalls.list files,
with the removal of syscalls that were in
sysdeps/unix/bsd/syscalls.list but overridden in the bsd4.4 directory
by .c files there.
Tested x86_64. The installed shared libraries are identical before
and after the patch except for libc.so where the move of wait3.c
(included by sysdeps/unix/sysv/linux/wait3.c) affects debug info, but
the disassembly is unchanged.
* sysdeps/mach/hurd/Implies: Change unix/bsd/bsd4.4 to unix/bsd.
* sysdeps/unix/bsd/syscalls.list (chflags): Add entry from
sysdeps/unix/bsd/bsd4.4/syscalls.list.
(fchflags): Likewise.
(revoke): Likewise.
(setlogin): Likewise.
(sigaltstack): Likewise.
(wait4): Likewise.
(sigblock): Remove.
(sigsetmask): Likewise.
(wait3): Likewise.
(waitpid): Likewise.
* sysdeps/unix/bsd/bsd4.4/syscalls.list: Remove file.
* sysdeps/unix/sysv/linux/wait3.c: Update directory of included
file.
* sysdeps/unix/bsd/bsd4.4/Makefile: Move to ...
* sysdeps/unix/bsd/Makefile: ... here.
* sysdeps/unix/bsd/bsd4.4/Versions: Move to ...
* sysdeps/unix/bsd/Versions: ... here.
* sysdeps/unix/bsd/bsd4.4/bits/sockaddr.h: Move to ...
* sysdeps/unix/bsd/bits/sockaddr.h: ... here.
* sysdeps/unix/bsd/bsd4.4/cmsg_nxthdr.c: Move to ...
* sysdeps/unix/bsd/cmsg_nxthdr.c: ... here.
* sysdeps/unix/bsd/bsd4.4/sigblock.c: Move to ...
* sysdeps/unix/bsd/sigblock.c: ... here.
* sysdeps/unix/bsd/bsd4.4/sigsetmask.c: Move to ...
* sysdeps/unix/bsd/sigsetmask.c: ... here.
* sysdeps/unix/bsd/bsd4.4/sigvec.c: Move to ...
* sysdeps/unix/bsd/sigvec.c: ... here.
* sysdeps/unix/bsd/bsd4.4/tcdrain.c: Move to ...
* sysdeps/unix/bsd/tcdrain.c: ... here.
* sysdeps/unix/bsd/bsd4.4/tcgetattr.c: Move to ...
* sysdeps/unix/bsd/tcgetattr.c: ... here.
* sysdeps/unix/bsd/bsd4.4/tcsetattr.c: Move to ...
* sysdeps/unix/bsd/tcsetattr.c: ... here.
* sysdeps/unix/bsd/bsd4.4/wait.c: Move to ...
* sysdeps/unix/bsd/wait.c: ... here.
* sysdeps/unix/bsd/bsd4.4/wait3.c: Move to ...
* sysdeps/unix/bsd/wait3.c: ... here.
* sysdeps/unix/bsd/bsd4.4/waitpid.c: Move to ...
* sysdeps/unix/bsd/waitpid.c: ... here.
The bsd implementation of ulimit produces wrong return values, so remove it
in favour of the posix implementation.
The only regression for non-Linux implementations using bsd sysdeps and not
providing an own ulimit is that the __UL_GETMAXBRK case (which is non-standard)
is left unimplemented (giving EINVAL).