Support added to identify Sparc M7/T7/S7/M8/T8 processor capability.
Performance tests run on Sparc S7 using new code and old niagara4 code.
Optimizations for memset also apply to bzero as they share code.
For memset/bzero, performance comparison with niagara4 code:
For memset nonzero data,
256-1023 bytes - 60-90% gain (in cache); 5% gain (out of cache)
1K+ bytes - 80-260% gain (in cache); 40-80% gain (out of cache)
For memset zero data (and bzero),
256-1023 bytes - 80-120% gain (in cache), 0% gain (out of cache)
1024+ bytes - 2-4x gain (in cache), 10-35% gain (out of cache)
Tested in sparcv9-*-* and sparc64-*-* targets in both multi and
non-multi arch configurations.
Patrick McGehearty <patrick.mcgehearty@oracle.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile
(sysdeps_routines): Add memset-niagara7.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdes_rotuines):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memset-niagara7.S: New
file.
* sysdeps/sparc/sparc64/multiarch/memset-niagara7.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add __bzero_niagara7 and __memset_niagara7.
* sysdeps/sparc/sparc64/multiarch/ifunc-memset.h (IFUNC_SELECTOR):
Add niagara7 option.
* NEWS: Mention sparc m7 optimized memcpy, mempcpy, memmove, and
memset.
Support added to identify Sparc M7/T7/S7/M8/T8 processor capability.
Performance tests run on Sparc S7 using new code and old niagara4 code.
Optimizations for memcpy also apply to mempcpy and memmove
where they share code. Optimizations for memset also apply
to bzero as they share code.
For memcpy/mempcpy/memmove, performance comparison with niagara4 code:
Long word aligned data
0-127 bytes - minimal changes
128-1023 bytes - 7-30% gain
1024+ bytes - 1-7% gain (in cache); 30-100% gain (out of cache)
Word aligned data
0-127 bytes - 50%+ gain
128-1023 bytes - 10-200% gain
1024+ bytes - 0-15% gain (in cache); 5-50% gain (out of cache)
Unaligned data
0-127 bytes - 0-70%+ gain
128-447 bytes - 40-80%+ gain
448-511 bytes - 1-3% loss
512-4096 bytes - 2-3% gain (in cache); 0-20% gain (out of cache)
4096+ bytes - ± 3% (in cache); 20-50% gain (out of cache)
Tested in sparcv9-*-* and sparc64-*-* targets in both multi and
non-multi arch configurations.
Patrick McGehearty <patrick.mcgehearty@oracle.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile
(sysdeps_routines): Add memcpy-memmove-niagara7 and memmove-ultra1.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdeps_routines):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy-memmove-niagara7.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memmove-ultra1.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/rtld-memmove.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add __memcpy_niagara7, __mempcpy_niagara7,
and __memmove_niagara7.
* sysdeps/sparc/sparc64/multiarch/ifunc-memcpy.h (IFUNC_SELECTOR):
Add niagara7 option.
* sysdeps/sparc/sparc64/multiarch/memmove.c: New file.
* sysdeps/sparc/sparc64/multiarch/ifunc-memmove.h: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy-memmove-niagara7.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memmove-ultra1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/rtld-memmove.c: Likewise.
Tested in sparcv9-*-* and sparc64-*-* targets in both non-multi-arch and
multi-arch configurations.
* sysdeps/sparc/sparc32/sparcv9/memmove.S: New file.
* sysdeps/sparc/sparc32/sparcv9/rtld-memmove.c: Likewise.
* sysdeps/sparc/sparc64/memmove.S: Likewise.
* sysdeps/sparc/sparc64/rtld-memmove.c: Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds support for the ADP (also known as adi) hardware
capability, as reported by the kernel sparc port when running on M7
machines.
Tested in both sparcv9-*-* and sparc64-*-* targets.
* sysdeps/sparc/bits/hwcap.h (HWCAP_SPARC_ADP): Defined.
* sysdeps/sparc/dl-procinfo.c: Added "adp" to the
_dl_sparc_cap_flags array.
* sysdeps/sparc/dl-procinfo.h (_DL_HWCAP_COUNT): Increment.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Replace the simple byte-wise compare in the misaligned case with a
dword compare with page boundary checks in place. For simplicity I've
chosen a 4K page boundary so that we don't have to query the actual
page size on the system.
This results in up to 3x improvement in performance in the unaligned
case on falkor and about 2.5x improvement on mustang as measured using
bench-strcmp.
* sysdeps/aarch64/strcmp.S (misaligned8): Compare dword at a
time whenever possible.
The default sysdeps/ieee754 fma implementations rely on exceptions and
rounding modes to achieve correct results through internal use of
round-to-odd. Thus, glibc configurations without support for
exceptions and rounding modes instead need to use implementations of
fma based on soft-fp.
At present, this is achieved via having implementation files in
soft-fp/ that are #included by sysdeps files for each glibc
configuration that needs them. In general this means such a
configuration has its own s_fma.c and s_fmaf.c.
TS 18661-1 adds functions that do an operation (+ - * / sqrt fma) on
arguments wider than the return type, with a single rounding of the
infinite-precision result to that return type. These are also
naturally implemented using round-to-odd on platforms with hardware
support for rounding modes and exceptions but lacking hardware support
for these narrowing operations themselves. (Platforms that have
direct hardware support for such narrowing operations include at least
ia64, and Power ISA 2.07 or later, which I think means POWER8 or
later.)
So adding the remaining TS 18661-1 functions would mean at least six
narrowing function implementations (fadd fsub fmul fdiv ffma fsqrt),
with aliases for other types and further implementations in some
configurations, that need to be overridden for configurations lacking
hardware exceptions and rounding modes. Requiring all such
configurations (currently seven of them) to have their own source
files for all those functions seems undesirable.
Thus, this patch adds a directory sysdeps/ieee754/soft-fp to contain
libm function implementations based on soft-fp. This directory is
then used via Implies from all the configurations that need it, so no
more files need adding to every such configuration when adding more
functions with soft-fp implementations. A configuration can still
selectively #include a particular file from this directory if desired;
thus, the MIPS #include of the fmal implementation is retained, since
that's appropriate even for hard float (because long double is always
implementated in software for MIPS64, so the soft-fp implementation of
fmal is better than the ldbl-128 one).
This also provides additional motivation for my recent patch removing
--with-fp / --without-fp: previously there was no need for correct use
of --without-fp for no-FPU ARM or SH3, and now we have autodetection
nofpu/ sysdeps directories can be used by this patch for those
configurations without imposing any new requirements on how glibc is
configured.
(The mips64/*/fpu/s_fma.c files added by this patch are needed to keep
the dbl-64 version of fma for double, rather than the ldbl-128 one,
used in that case.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* soft-fp/fmadf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fma.c: ... here.
* soft-fp/fmasf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmaf.c: ... here.
* soft-fp/fmatf4.c: Move to ....
* sysdeps/ieee754/soft-fp/s_fmal.c: ... here.
* sysdeps/ieee754/soft-fp/Makefile: New file.
* sysdeps/arm/preconfigure.ac: Define with_fp_cond.
* sysdeps/arm/preconfigure: Regenerated.
* sysdeps/arm/nofpu/Implies: New file.
* sysdeps/arm/s_fma.c: Remove file.
* sysdeps/arm/s_fmaf.c: Likewise.
* sysdeps/m68k/coldfire/nofpu/Implies: New file.
* sysdeps/m68k/coldfire/nofpu/s_fma.c: Remove file.
* sysdeps/m68k/coldfire/nofpu/s_fmaf.c: Likewise.
* sysdeps/microblaze/Implies: Add ieee754/soft-fp.
* sysdeps/microblaze/s_fma.c: Remove file.
* sysdeps/microblaze/s_fmaf.c: Likewise.
* sysdeps/mips/mips32/nofpu/Implies: New file.
* sysdeps/mips/mips64/n32/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n32/nofpu/Implies: Likewise.
* sysdeps/mips/mips64/n64/fpu/s_fma.c: Likewise.
* sysdeps/mips/mips64/n64/nofpu/Implies: Likewise.
* sysdeps/mips/ieee754/s_fma.c: Remove file.
* sysdeps/mips/ieee754/s_fmaf.c: Likewise.
* sysdeps/mips/ieee754/s_fmal.c: Update include for move of fmal
implementation.
* sysdeps/nios2/Implies: Add ieee754/soft-fp.
* sysdeps/nios2/s_fma.c: Remove file.
* sysdeps/nios2/s_fmaf.c: Likewise.
* sysdeps/sh/nofpu/Implies: New file.
* sysdeps/sh/s_fma.c: Remove file.
* sysdeps/sh/s_fmaf.c: Likewise.
* sysdeps/tile/Implies: Add ieee754/soft-fp.
* sysdeps/tile/s_fma.c: Remove file.
* sysdeps/tile/s_fmaf.c: Likewise.
When running strace, IPC_64 was set in the command, but ia64 is
an architecture where CONFIG_ARCH_WANT_IPC_PARSE_VERSION *isn't* set
in the kernel, so ipc_parse_version just returns IPC_64 without
clearing the IPC_64 bit in the command.
* sysdeps/unix/sysv/linux/ia64/ipc_priv.h: New file defining
__IPC_64 to 0 to avoid IPC_64 being set.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
There is a configure option --without-fp that specifies that nofpu
sysdeps directories should be used instead of fpu directories.
For most glibc configurations, this option is of no use: either there
is no valid nofpu variant of that configuration, or there are no fpu
or nofpu sysdeps directories for that processor and so the option does
nothing. For a few configurations, if you are using a soft-float
compiler this option is required, and failing to use it generally
results in compilation errors from inline asm using unavailable
floating-point instructions.
We're moving away from --with-cpu to configuring glibc based on how
the compiler generates code, and it is natural to do so for
--without-fp as well; in most cases the soft-float and hard-float ABIs
are incompatible so you have no hope of building a working glibc with
an inappropriately configured compiler or libgcc.
This patch eliminates --without-fp, replacing it entirely by automatic
configuration based on the compiler. Configurations for which this is
relevant (coldfire / mips / powerpc32 / sh) define a variable
with_fp_cond in their preconfigure fragments (under the same
conditions under which those fragments do anything); this is a
preprocessor conditional which the toplevel configure script then uses
in a test to determine which sysdeps directories to use.
The config.make with-fp variable remains. It's used only by powerpc
(sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various
flags variables. For powerpc, -mcpu= options can imply use of
soft-float. That could be an issue if you want to build for
e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp
sysdeps directory. If in future we eliminate --with-cpu and replace
it entirely by testing the compiler, it would be natural at that point
to eliminate that code as well (as the user should then just use a
compiler defaulting to 476fp and the 476 sysdeps directory would be
used automatically).
Tested for x86_64, and tested with build-many-glibcs.py that installed
shared libraries are unchanged by this patch.
* configure.ac (--with-fp): Remove configure option.
(with_fp_cond): New variable.
(libc_cv_with_fp): New configure test. Use this variable instead
of with_fp.
* configure: Regenerated.
* config.make.in (with-fp): Use @libc_cv_with_fp@.
* manual/install.texi (Configuring and compiling): Remove
--without-fp.
* INSTALL: Regenerated.
* sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire.
* sysdeps/mips/preconfigure (with_fp_cond): Define.
* sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit.
* sysdeps/sh/preconfigure (with_fp_cond): Define.
* scripts/build-many-glibcs.py (Context.add_all_configs): Do not
use --without-fp to configure glibc.
The same logic used in s_cosf.S version for x86 and powerpc
is used to create a generic s_cosf.c, so there is no performance
improvement in x86_64 and powerpc64.
* sysdeps/ieee754/flt-32/s_cosf.c: New implementation.
On POWER8, unaligned memory accesses to cached memory has little impact
on performance as opposed to its ancestors.
It is disabled by default and will only be available when the tunable
glibc.tune.cached_memopt is set to 1.
__memcpy_power8_cached __memcpy_power7
============================================================
max-size=4096: 33325.70 ( 12.65%) 38153.00
max-size=8192: 32878.20 ( 11.17%) 37012.30
max-size=16384: 33782.20 ( 11.61%) 38219.20
max-size=32768: 33296.20 ( 11.30%) 37538.30
max-size=65536: 33765.60 ( 10.53%) 37738.40
* manual/tunables.texi (Hardware Capability Tunables): Document
glibc.tune.cached_memopt.
* sysdeps/powerpc/cpu-features.c: New file.
* sysdeps/powerpc/cpu-features.h: New file.
* sysdeps/powerpc/dl-procinfo.c [!IS_IN(ldconfig)]: Add
_dl_powerpc_cpu_features.
* sysdeps/powerpc/dl-tunables.list: New file.
* sysdeps/powerpc/ldsodefs.h: Include cpu-features.h.
* sysdeps/powerpc/powerpc32/power4/multiarch/init-arch.h
(INIT_ARCH): Initialize use_aligned_memopt.
* sysdeps/powerpc/powerpc64/dl-machine.h [defined(SHARED &&
IS_IN(rtld))]: Restrict dl_platform_init availability and
initialize CPU features used by tunables.
* sysdeps/powerpc/powerpc64/multiarch/Makefile (sysdep_routines):
Add memcpy-power8-cached.
* sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c: Add
__memcpy_power8_cached.
* sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-power8-cached.S:
New file.
Reviewed-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
In _dl_runtime_resolve[_vx], unwinding fails after the new stack frame
is created as there is no CFI rule for r15. This is also observeable in
GDB: Backtrace stopped: previous frame inner to this frame (corrupt stack?)
Therefore this patch is now storing r15 on stack and is using cfi_offset rule.
The stmg/lmg instruction is used to store/load r14 and r15 with one instruction.
On 64bit, the offsets of the fprs have moved to store r15 directly after r14.
On 31bit, the r14/r15 is now stored between the other gprs and fprs as the space
wasn't used.
ChangeLog:
* sysdeps/s390/s390-64/dl-trampoline.h (_dl_runtime_resolve):
Store r15 on stack and add cfi rule.
* sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_resolve):
Likewise.
On Skylake, bench-sinf reports performance improvement:
Before After Improvement
max 153.996 100.094 54%
min 8.546 6.852 25%
mean 18.1223 11.802 54%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_sinf-sse2 and s_sinf-fma.
(CFLAGS-s_sinf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_sinf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_sinf-sse2.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sinf.c: Likewise.
This patch makes the libm_alias_float macro support creating _Float32
aliases, in preparation for enabling glibc support for that type.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float32 changes.
* sysdeps/generic/libm-alias-float.h: Include <bits/floatn.h>.
[__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32]
(libm_alias_float_other_r): Create f32 alias.
(libm_alias_float_r): Use semicolon before call to
libm_alias_float_other_r.
This patch corrects three ia64 libm_alias_float_other calls so they
generate the intended _Float32 aliases when such aliases are enabled.
Tested with build-many-glibcs.py for ia64-linux-gnu (that installed
stripped shared libraries are unchanged when applied to current
sources, and that this enables compilation tests to pass when used in
conjunction with other _Float32 patches).
* sysdeps/ia64/fpu/e_exp2f.S (__exp2f): Use exp2 not __exp2 as
second argument to libm_alias_float_other.
* sysdeps/ia64/fpu/e_log2f.S (__log2f): Use log2 not __log2 as
second argument to libm_alias_float_other.
* sysdeps/ia64/fpu/e_powf.S (__powf): Use pow not __pow as second
argument to libm_alias_float_other.
The ldbl-96 implementation of j1l has some function-local variables
that are declared static for no apparent reason (this dates back to
the first addition of that file).
Any vaguely recent compiler, probably including any that are supported
for building glibc, optimizes away the "static" here, as the values of
the variables on entry to the function are dead. So there is not
actually a user-visible bug here at present (but with any compilers
that didn't optimize away the static at all, possibly building with
less or no optimization, so that the function stored intermediate
values to and then loaded them from the variables, there would have
been a thread-safety issue). But the "static" clearly doesn't belong
there and might potentially make things unsafe were compilation
without optimization to be supported in future, so this patch removes
it.
Tested for x86_64.
* sysdeps/ieee754/ldbl-96/e_j1l.c (qone): Don't make local
variables static.
I noticed that an x86_64 build of libm unexpectedly contained more
non-constant data than an older version (before _Float128 support)
did. The problem is non-const arrays in the ldbl-128 j0l and j1l
implementations; this patch makes those arrays, and the corresponding
ldbl-128ibm ones, const.
Tested for x86_64, and tested compilation for powerpc with
build-many-glibcs.py.
* sysdeps/ieee754/ldbl-128/e_j0l.c (Y0_2N): Make const.
(Y0_2D): Likewise.
* sysdeps/ieee754/ldbl-128/e_j1l.c (Y0_2N): Likewise.
(Y0_2D): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_j0l.c (Y0_2N): Likewise.
(Y0_2D): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_j1l.c (Y0_2N): Likewise.
(Y0_2D): Likewise.
This patch continues filling out TS 18661-3 support by adding *f64 and
*f32x function aliases, supporting _Float64 and _Float32x, as aliases
for double functions. These types are supported for all glibc
configurations. The API corresponds exactly to that for _Float128 and
_Float64x. _Float32 aliases to float functions remain to be added in
subsequent patches to complete this process (then there are a few
miscellaneous functions in TS 18661-3 to implement that aren't simply
versions of existing functions for new types).
The patch enables the feature in bits/floatn-common.h, adds symbol
versions and documentation with updates to ABI baselines, and arranges
for the libm functions for the new types to be tested. As with the
_Float64x changes there are some x86 ulps updates because of header
inlines not used for the new types (and one other change to the
non-multiarch libm-test-ulps, which I suppose comes from using a
different compiler version / configuration from when it was last
regenerated).
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT64): Define to 1.
(__HAVE_FLOAT32X): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64
and _Float32x.
* math/Makefile (test-types): Add float64 and float32x.
* math/Versions (GLIBC_2.27): Add _Float64 and _Float32x
functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
This patch adds several new tunables to control the behavior of
elision on supported platforms[1]. Since elision now depends
on tunables, we should always *compile* with elision enabled,
and leave the code disabled, but available for runtime
selection. This gives us *much* better compile-time testing of
the existing code to avoid bit-rot[2].
Tested on ppc, ppc64, ppc64le, s390x and x86_64.
[1] This part of the patch was initially proposed by
Paul Murphy but was "staled" because the framework have changed
since the patch was originally proposed:
https://patchwork.sourceware.org/patch/10342/
[2] This part of the patch was inititally proposed as a RFC by
Carlos O'Donnell. Make sense to me integrate this on the patch:
https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html
* elf/dl-tunables.list: Add elision parameters.
* manual/tunables.texi: Add entries about elision tunable.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c:
Add callback functions to dynamically enable/disable elision.
Add multiple callbacks functions to set elision parameters.
Deleted __libc_enable_secure check.
* sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise.
* configure: Regenerated.
* configure.ac: Option enable_lock_elision was deleted.
* config.h.in: ENABLE_LOCK_ELISION flag was deleted.
* config.make.in: Remove references to enable_lock_elision.
* manual/install.texi: Elision configure option was removed.
* INSTALL: Regenerated to remove enable_lock_elision.
* nptl/Makefile:
Disable elision so it can verify error case for destroying a mutex.
* sysdeps/powerpc/nptl/elide.h:
Cleanup ENABLE_LOCK_ELISION check.
Deleted macros for the case when ENABLE_LOCK_ELISION was not defined.
* sysdeps/s390/configure: Regenerated.
* sysdeps/s390/configure.ac: Remove references to enable_lock_elision..
* nptl/tst-mutex8.c:
Deleted all #ifndef ENABLE_LOCK_ELISION from the test.
* sysdeps/powerpc/powerpc32/sysdep.h:
Deleted all ENABLE_LOCK_ELISION checks.
* sysdeps/powerpc/powerpc64/sysdep.h: Likewise.
* sysdeps/powerpc/sysdep.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise.
* sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/s390/Makefile: Remove references to
enable-lock-elision.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This patch avoid an extra floating point to integer conversion in
reduced internal function for generic sinf by defining the sign as
double instead of integers.
There is no much difference on Haswell with GCC 7.2.1:
Before After
min 9.11 9.108
mean 21.982 21.9224
However H.J. Lu reported gains on Skylake:
Before:
"sinf": {
"": {
"duration": 3.4044e+10,
"iterations": 1.9942e+09,
"max": 141.106,
"min": 7.704,
"mean": 17.0715
}
}
After:
"sinf": {
"": {
"duration": 3.40665e+10,
"iterations": 2.03199e+09,
"max": 95.994,
"min": 7.704,
"mean": 16.765
}
}
Checked on x86_64-linux-gnu.
* sysdeps/ieee754/flt-32/s_sinf.c (ones): Define as double.
(reduced): Use ones as double instead of integer.
sinf(NAN) should not signal invalid fp exception
so use isless instead of < where NAN is compared.
this makes the sinf tests pass on aarch64.
* sysdeps/ieee754/flt-32/s_sinf.c (sinf): Use isless.
This patch makes the libm_alias_double macros support creating
_Float64 and _Float32x aliases, in preparation for enabling glibc
support for those types.
Tested for x86_64; also tested with build-many-glibcs.py in
conjunction with other _Float64 / _Float32x changes.
* sysdeps/generic/libm-alias-double.h: Include <bits/floatn.h>.
(libm_alias_double_other_r_f64): New macro.
(libm_alias_double_other_r_f32x): Likewise.
(libm_alias_double_other_r): Use libm_alias_double_other_r_f64 and
libm_alias_double_other_r_f32x.
(libm_alias_double_r): Use semicolon before call to
libm_alias_double_other_r.
* sysdeps/ieee754/ldbl-opt/libm-alias-double.h: Include
<bits/floatn.h>.
(libm_alias_double_other_r_f64): New macro.
(libm_alias_double_other_r_f32x): Likewise.
(libm_alias_double_other_r): Use libm_alias_double_other_r_f64 and
libm_alias_double_other_r_f32x.
Since s_sinf.c either assigns the return value of floor to integer or
passes double converted from integer to floor, this patch replaces
floor with simple casts.
Also since long == int for 32-bit targets, we can use long instead of
int to avoid 64-bit integer for 64-bit targets.
On Skylake, bench-sinf reports performance improvement:
Before After Improvement
max 130.566 129.564 30%
min 7.704 7.706 0%
mean 21.8188 19.1363 30%
* sysdeps/ieee754/flt-32/s_sinf.c (reduced): Replace long with
int.
(SINF_FUNC): Likewise. Replace floor with simple casts.
Avoid an issue in gcc where some of the vector (aka SIMD) ops will
sometimes end up getting wrongly optimized out. We use these
instructions in many of the string implementations. If/when we
have an upstreamed fix for this problem in gcc we can conditionalize
the use of the extended assembly workaround in glibc.
This adds system call wrappers for pkey_alloc, pkey_free, pkey_mprotect,
and x86-64 implementations of pkey_get and pkey_set, which abstract over
the PKRU CPU register and hide the actual number of memory protection
keys supported by the CPU. pkey_mprotect with a -1 key is implemented
using mprotect, so it will work even if the kernel does not support the
pkey_mprotect system call.
The system call wrapers use unsigned int instead of unsigned long for
parameters, so that no special treatment for x32 is needed. The flags
argument is currently unused, and the access rights bit mask is limited
to two bits by the current PKRU register layout anyway.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes powerpc libm function implementations use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/fpu/s_cosf.c: Include <libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_fabs.S: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_fmaf.S: Include <libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_rintf.c: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_sinf.c: Include <libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/powerpc/power5+/fpu/s_modff.c: Include
<libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/power7/fpu/s_logbf.c: Include
<libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_llrintf.c: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_llroundf.c: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceilf.c:
Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysignf.c:
Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf.c:
Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrintf.c:
Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llroundf.c:
Include <libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbf.c:
Include <libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lrintf.c:
Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lroundf.c:
Include <libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modff.c:
Include <libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_roundf.c:
Include <libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_truncf.c:
Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lrint.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceilf.c: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysignf.c: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_cosf.c: Include
<libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf.c: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrintf.c: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llroundf.c: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf.c: Include
<libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff.c: Include
<libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_roundf.c: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_sinf.c: Include
<libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_truncf.c: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_cosf.S: Include
<libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_sinf.S: Include
<libm-alias-float.h>.
(sinf): Define using libm_alias_float.
The new sinf implementation introduced localplt failures for all
platforms where the compiler did not inline the calls to floor
(converted to trunc by machine-independent optimizations). This patch
changes the calls to use __floor as normal in libm.
We can't use the public function names floor / floorf / floorl /
floorf128 in libm code in the absence of appropriate asms to redirect
floor/trunc calls, if not inlined, to use the internal names instead
(while avoiding breaking code building the floor functions themselves)
- while having such asms and then calling the public functions
unconditionally would be desirable for optimization (few architectures
have __floor inlines in math_private.h, and once the built-in function
is used you don't need them), using __floor is the minimum safe fix
for the present test regressions.
Tested with build-many-glibcs.py that this fixes the localplt test
failure for arm-linux-gnueabi.
* sysdeps/ieee754/flt-32/s_sinf.c (SINF_FUNC): Use __floor instead
of floor.
The __GI_* symbol aliases for __memcpy_generic are unnecessary since
they're never used. Add them only for libc.so to avoid PLT. Maybe
some time in future we need to evaluate the relative cost of PLT vs
gains from multiarch memcpy implementations and take a call on whether
to drop this completely.
* sysdeps/aarch64/multiarch/memcpy_generic.S (__GI_memcpy):
Define only for libc.so.
On s390, GDB fails to show the complete backtrace from within vdso functions.
The macro INTERNAL_VSYSCALL_CALL saves the return address in r14 to r10
before branching to the vdso function. The branch-instruction updates r14
in order to let the vdso function return. Then the original address in r14 is
restored from r10. Unfortunately, there are no cfi-rules and GDB fails.
Furthermore the call of the vdso function does not comply with the s390 ABI
as no stack-frame for the vdso-function is generated.
This patch removes the s390 specific macro INTERNAL_VSYSCALL_CALL
and the common implementation in sysdeps/unix/sysv/linux/sysdep-vdso.h is used.
Then the vdso function is called via function-pointer and GCC generates a
new stack-frame and emits all needed cfi-rules.
The defines CLOBBER_[0-6] are removed as they were only used in macro
INTERNAL_VSYSCALL_CALL.
The macro INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK is not used on s390.
The only user is power. Thus it is removed from s390 sysdep.h.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h
(INTERNAL_VSYSCALL_CALL, CLOBBER_0, CLOBBER_1, CLOBBER_2,
CLOBBER_3, CLOBBER_4, CLOBBER_5, CLOBBER_6,
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK): Remove.
* sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h: Likewise.
[BZ libc/19170]
* sysdeps/hppa/crti.S: Declare PREINIT_FUNCTION weak_extern when
PREINIT_FUNCTION_WEAK is nonzero.
(gmon_initializer): New function. Put procedure label for it in
.init_array section.
(_init): Don't call PREINIT_FUNCTION.
* sysdeps/hppa/crtn.S (__gmon_start__): Remove.
* sysdeps/hppa/dl-lookupcfg.h (DL_FIXUP_MAKE_VALUE): Create null fixup
value when map argument is null.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes the remaining double powerpc functions use
libm_alias_double to define function aliases (with consequent removal
of the need for local compat symbol handling). Previous cleanups
avoid this patch changing installed stripped shared libraries for any
build-many-glibcs.py configuration (there are still some functions in
this patch for which the order of double and float aliases changes
within an individual source file, but in this case this doesn't result
in changes to the final library).
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/power7/fpu/s_logb.c: Include
<libm-alias-double.h>.
(logb): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_llround.c: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Include
<libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign.c:
Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrint.c:
Include <libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround.c:
Include <libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb.c: Include
<libm-alias-double.h>.
(logb): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lrint.c:
Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lround.c:
Include <libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_lround.S: Include
<libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lrint.S: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lround.S: Include
<libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign.c: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint.c: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
(lrint): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround.c: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb.c: Include
<libm-alias-double.h>.
(logb): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
(lrint): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
* sysdeps/powerpc/powerpc64/power6/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
(lrint): Likewise.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
(lrint): Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround.c defines the
lroundl compat symbol, version GLIBC_2_1, twice, once based on llround
and once based on __lround. Those are aliases for each other (llround
weak, __lround strong), but defining it twice does not make sense.
This patch changes it to define the compat symbol once only, matching
how libm_alias_double defines it.
Tested with build-many-glibcs.py for its powerpc64 configurations.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround.c
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_1)] (lroundl): Do not define
compat symbol based on llround.
Some powerpc logb implementations define a compat symbol for logbl
based on logb, whereas libm_alias_double defines such a compat symbol
based on __logb instead. This difference (logb is weak, __logb isn't)
is enough to result in different installed stripped shared libraries.
The difference in the installed libraries isn't significant, but first
changing the compat_symbol calls helps make it possible to validate a
subsequent change to use libm_alias_double by comparison of libraries,
so this patch does such a preliminary change.
Tested with build-many-glibcs.py for all its hard-float powerpc
configurations.
* sysdeps/powerpc/power7/fpu/s_logb.c
[LONG_DOUBLE_COMPAT (libm, GLIBC_2_0)] (logbl): Define as compat
symbol based on __logb, not on logb.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb.c
[LONG_DOUBLE_COMPAT (libm, GLIBC_2_0)] (logbl): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb.c
[LONG_DOUBLE_COMPAT (libm, GLIBC_2_0)] (logbl): Likewise.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch various powerpc functions use libm_alias_double to
define function aliases (with consequent removal of the need for local
compat symbol handling). (The present patch excludes the changes to
some functions where such changes could result in differences in
installed stripped shared libraries because of changes to the exact
ordering or properties of symbols in individual .os files.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/fpu/s_rint.c: Include <libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/powerpc/power5+/fpu/s_modf.c: Include
<libm-alias-double.h>.
(modf): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_round.S: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceil.c: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor.c:
Include <libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modf.c: Include
<libm-alias-double.h>.
(modf): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_round.c:
Include <libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_trunc.c:
Include <libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceil.S: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floor.S: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_round.S: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_trunc.S: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceil.c: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floor.c: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf.c: Include
<libm-alias-double.h>.
(modf): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_round.c: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_trunc.c: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_round.S: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceil.S: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floor.S: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_round.S: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_trunc.S: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes powerpc fabs and fma use libm_alias_double
to define function aliases. This brings in automatic symbol
versioning compat handling, so the powerpc32 and powerpc64 wrappers
that added such handling to the generic sysdeps/powerpc/fpu versions
are removed as no longer required (there are no sysdeps directory
ordering issues that would necessitate keeping trivial wrappers
there).
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/fpu/s_fabs.S: Include <libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/powerpc/fpu/s_fma.S: Include <libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_fabs.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_fma.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_fabs.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_fma.S: Likewise.
On POWER9, cbrtf128 fails by 1 ULP.
* sysdeps/powerpc/fpu/libm-test-ulps: Regenerate.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
Now that all SPARC ifunc converted to C implementation there is no need
for both C and assembly macros. This patch removes the assembly ones.
Checked on sparcv9-linux-gnu and sparc64-linux-gnu.
* sysdeps/sparc/sparc-ifunc.h (SPARC_ASM_IFUNC_DFLT,
SPARC_ASM_IFUNC1, SPARC_ASM_IFUNC2, SET, SPARC_ASM_VIS2_IFUNC,
SPARC_ASM_VIS3_IFUNC, SPARC_ASM_VIS3_VIS2_IFUNC): Remove macros.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_nearbyint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_nearbyintf-generic and
s_nearbyint-generic.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint-generic.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf.c:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint.S: Remove
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf.S:
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_rint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_rintf-generic and s_rint-generic.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint-generic.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_llrint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_llrintf-generic and s_llrint-generic.
* sysdeps/sparc/sparcv9/fpu/multiarch/s_llrint-generic.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_fabs{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_fabsf-generic and s_fabs-generic.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs-generic.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_copysign{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(sysdep_calls): New rule.
(sysdep_routines): Use sysdep_calls as base.
(libm-sysdep_routines): Add generic rule for symbols shared with
libc. Add s_copysign-generic and s_copysign-generic objects.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign-generic.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes an e500 libm function implementation use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for its e500 configurations.
* sysdeps/powerpc/powerpc32/e500/nofpu/s_fabsf.S: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes coldfire libm function implementations use
libm_alias_float to define function aliases.
Untested, given the currently broken state of GCC for coldfire.
* sysdeps/m68k/coldfire/fpu/s_fabsf.c: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/m68k/coldfire/fpu/s_lrintf.c: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/m68k/coldfire/fpu/s_rintf.c: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes coldfire libm function implementations use
libm_alias_double to define function aliases.
Untested, given the currently broken state of GCC for coldfire.
* sysdeps/m68k/coldfire/fpu/s_fabs.c: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/m68k/coldfire/fpu/s_lrint.c: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/m68k/coldfire/fpu/s_rint.c: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
Many m68k libm functions use their own system to share code between
different types and functions, involving defining macros before
including code for another function (for example, s_atan.c also acts
as a template that can define other functions).
Thes files serving as templates generate function aliases directly
with e.g. "weak_alias (__CONCATX(__,FUNC), FUNC)" in s_atan.c. To be
prepared to generate _Float32, _Float64 and _Float32x function
aliases, this needs changing so that the libm_alias_* macros get used
instead. As the macro to use varies depending on the type, that would
mean additional macros to define in several different places to get
the appropriate alias-generation macro used in each case.
Rather than adding to the m68k-specific mechanisms, this patch
converts the functions in question to use something closer to the
math/ type-generic template mechanism. After this patch, these
functions have m68k-specific templates such as s_atan_template.c, but
those templates use all the same macros as in the math/ templates,
such as FLOAT, M_DECL_FUNC, M_SUF and declare_mgen_alias. There is no
automatic generation of the files such as s_atan.c that include the
appropriate math-type-macros-*.h header and the template file (the
existing automatic generation logic is only applicable for the fixed
set of templates listed in math/ - and sysdeps sources always override
files generated that way), so those files are still checked in, but
they are all the obvious two-line files (with one additional
definition in the case of the expm1 implementations), rather than
making e.g. s_atan.c special.
Functions are only converted where they should have aliases for
_FloatN / _FloatNx types. Those m68k functions that do not generate
public names (those that only generate __ieee754_*, with wrappers
generating the public names, and classification functions that only
exist once per format not once per type so don't get aliases) are
unchanged. However, log1p (public names generated by wrapper) and
significand (not provided for new types so no new aliases needed)
needed changing because they previously included the atan
implementations. Now, s_significand.c is the main implementation for
functions with that prototype and using the old implementation
approach, while log1p includes it in place of atan.
Any further cleanups in this area (which preserve the proper set of
functions getting aliases defined by libm_alias_float and
libm_alias_double) are of course welcome, just not needed for the
goals of this patch.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch.
* sysdeps/m68k/m680x0/fpu/s_atan_template.c: New file.
* sysdeps/m68k/m680x0/fpu/s_ceil_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_cos_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_expm1_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_fabs_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_floor_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_frexp_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_lrint_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_modf_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_nearbyint_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_remquo_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_rint_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_sin_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_sincos_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_tan_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_tanh_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_trunc_template.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_atan.c: Reimplement to use
s_atan_template.c.
* sysdeps/m68k/m680x0/fpu/s_atanf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_atanl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_ceil.c: Reimplement to use
s_ceil_template.c.
* sysdeps/m68k/m680x0/fpu/s_ceilf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_ceill.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_cos.c: Reimplement to use
s_cos_template.c.
* sysdeps/m68k/m680x0/fpu/s_cosf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_cosl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_expm1.c: Reimplement to use
s_expm1_template.c.
* sysdeps/m68k/m680x0/fpu/s_expm1f.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_expm1l.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_fabs.c: Reimplement to use
s_fabs_template.c.
* sysdeps/m68k/m680x0/fpu/s_fabsf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_fabsl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_floor.c: Reimplement to use
s_floor_template.c.
* sysdeps/m68k/m680x0/fpu/s_floorf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_floorl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_frexp.c: Reimplement to use
s_frexp_template.c.
* sysdeps/m68k/m680x0/fpu/s_frexpf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_lrint.c: Reimplement to use
s_lrint_template.c.
* sysdeps/m68k/m680x0/fpu/s_lrintf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_lrintl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_modf.c: Reimplement to use
s_modf_template.c.
* sysdeps/m68k/m680x0/fpu/s_modff.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_modfl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_nearbyint.c: Reimplement to use
s_nearbyint_template.c.
* sysdeps/m68k/m680x0/fpu/s_nearbyintf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_nearbyintl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_remquo.c: Reimplement to use
s_remquo_template.c.
* sysdeps/m68k/m680x0/fpu/s_remquof.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_remquol.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_rint.c: Reimplement to use
s_rint_template.c.
* sysdeps/m68k/m680x0/fpu/s_rintf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_rintl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_sin.c: Reimplement to use
s_sin_template.c.
* sysdeps/m68k/m680x0/fpu/s_sinf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_sinl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_sincos.c: Reimplement to use
s_sincos_template.c.
* sysdeps/m68k/m680x0/fpu/s_sincosf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_sincosl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_tan.c: Reimplement to use
s_tan_template.c.
* sysdeps/m68k/m680x0/fpu/s_tanf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_tanl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_tanh.c: Reimplement to use
s_tanh_template.c.
* sysdeps/m68k/m680x0/fpu/s_tanhf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_tanhl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_trunc.c: Reimplement to use
s_trunc_template.c.
* sysdeps/m68k/m680x0/fpu/s_truncf.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_truncl.c: Likewise.
* sysdeps/m68k/m680x0/fpu/s_significand.c: Reimplement based on
s_atan.c instead of including s_atan.c.
* sysdeps/m68k/m680x0/fpu/s_significandf.c: Reimplement based on
s_atanf.c instead of including s_atanf.c.
* sysdeps/m68k/m680x0/fpu/s_significandl.c: Reimplement based on
s_atanl.c instead of including s_atanl.c.
* sysdeps/m68k/m680x0/fpu/s_log1p.c: Include s_significand.c
instead of s_atan.c.
* sysdeps/m68k/m680x0/fpu/s_log1pf.c: Include s_significandf.c
instead of s_atanf.c.
* sysdeps/m68k/m680x0/fpu/s_log1pl.c: Include s_significandl.c
instead of s_atanl.c.
Most m68k libm functions share code via sources for one function
including those for another function or type, in a way that will
require significant changes to create function aliases in a way
friendly to adding _FloatN / _FloatNx aliases.
The llrint function implementations, however, use a conventional
separate implementation for each floating-point type. Thus preparing
them for _FloatN / _FloatNx aliases is just a matter of changing them
to include the appropriate headers and use the appropriate macros,
which this patch does. The llrintl changes aren't strictly required,
since m68k long double does not meet the criteria for a _FloatN /
_FloatNx type, but are included anyway to keep consistency between the
implementations for the three types.
Tested with build-many-glibcs.py that installed stripped shared
libraries for m68k-linux-gnu are unchanged by the patch.
* sysdeps/m68k/m680x0/fpu/s_llrint.c: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/m68k/m680x0/fpu/s_llrintf.c: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/m68k/m680x0/fpu/s_llrintl.c: Include
<libm-alias-ldouble.h>.
(llrintl): Define using libm_alias_ldouble.
Some m68k libm functions have their own templates replacing the
generic math/ ones but using the type-generic template machinery.
These currently define function aliases directly using weak_alias. In
preparation for additional _FloatN / _FloatNx function aliases, this
patch changes them to use declare_mgen_alias for creating aliases
instead.
Tested with build-many-glibcs.py that installed stripped shared
libraries for m68k-linux-gnu are unchanged by the patch.
* sysdeps/m68k/m680x0/fpu/s_ccosh_template.c (ccosh): Use
declare_mgen_alias instead of weak_alias.
* sysdeps/m68k/m680x0/fpu/s_cexp_template.c (cexp): Likewise.
* sysdeps/m68k/m680x0/fpu/s_csin_template.c (csin): Likewise.
* sysdeps/m68k/m680x0/fpu/s_csinh_template.c (csinh): Likewise.
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
add_n-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add add_n-generic.
* sysdeps/sparc/sparc64/multiarch/add_n-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/add_n.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/add_n.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
submul_1-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add submul_1-generic.
* sysdeps/sparc/sparc64/multiarch/submul_1-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/submul_1.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/submul_1.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
addmul_1-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add addmul_1-generic.
* sysdeps/sparc/sparc64/multiarch/addmul_1-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/addmul_1.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/addmul_1.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
sub_n-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add sub_n-generic.
* sysdeps/sparc/sparc64/multiarch/sub_n-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/sub_n.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/sub_n.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
mul_1-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add mul_1-generic.
* sysdeps/sparc/sparc64/multiarch/mul_1-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/mul_1.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/mul_1.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
To support Shadow Stack (SHSTK) in Intel Control-flow Enforcement
Technology (CET) in setjmp/longjmp, we need to save shadow stack
pointer in jmp_buf. The __saved_mask field in jmp_buf has type
of __sigset_t. On Linux, __sigset_t is defined as
#define _SIGSET_NWORDS (1024 / (8 * sizeof (unsigned long int)))
typedef struct
{
unsigned long int __val[_SIGSET_NWORDS];
} __sigset_t;
which is much bigger than expected by the __sigprocmask system call,
which has
typedef struct {
unsigned long sig[_NSIG_WORDS];
} sigset_t;
For Linux/x86, we can shrink __sigset_t used by __saved_mask in jmp_buf
to add paddings for shadow stack pointer. As long as the new __sigset_t
is not smaller than sigset_t expected by the __sigprocmask system call,
it should work correctly.
This patch adds an internal header file, <setjmpP.h>, to define
__jmp_buf_sigset_t for __saved_mask in jmp_buf for Linux/x86 with a
space to store shadow stack pointer. It verifies __jmp_buf_sigset_t has
the suitable size for the __sigprocmask system call. A run-time test,
tst-saved_mask-1.c, is added to verify that size of __jmp_buf_sigset_t
is sufficient. If its size is too small, the test fails with
rt_sigprocmask(SIG_SETMASK, strace: umoven: short read (4 < 8) @0x7fa8aa28effc
0x7fa8aa28effc, NULL, 8) = -1 EFAULT (Bad address)
rt_sigprocmask(SIG_SETMASK, strace: umoven: short read (4 < 8) @0x7fa8aa28effc
0x7fa8aa28effc, NULL, 8) = -1 EFAULT (Bad address)
rt_sigprocmask(SIG_SETMASK, NULL, 0x7fa8aa28effc, 8) = -1 EFAULT (Bad address)
exit_group(1) = ?
Tested with build-many-glibcs.py.
* debug/longjmp_chk.c: Include <setjmpP.h> instead of
<setjmp.h>.
* setjmp/longjmp.c: Include <setjmpP.h> instead of <setjmp.h>.
(__libc_siglongjmp): Cast &env[0].__saved_mask to "sigset_t *".
* setjmp/sigjmp.c: Include <setjmpP.h> instead of <setjmp.h>.
(__sigjmp_save): Cast &env[0].__saved_mask to "sigset_t *".
* sysdeps/generic/setjmpP.h: New file.
* sysdeps/unix/sysv/linux/x86/jmp_buf-ssp.sym: Likewise.
* sysdeps/unix/sysv/linux/x86/setjmpP.h: Likewise.
* sysdeps/unix/sysv/linux/x86/tst-saved_mask-1.c: Likewise.
* sysdeps/unix/sysv/linux/x86/Makefile (gen-as-const-headers):
Add jmp_buf-ssp.sym.
(tests): Add tst-saved_mask-1.
The sparc32/sparcv9/fpu/multiarch implementations of llrint / llrintf
have aliases lllrint / lllrintf. No such function is exported from or
used in libm and these aliases should not be there; I expect they
arose accidentally in the course of converting a 64-bit implementation
(where lrint and llrint can be aliases) to a 32-bit llrint
implementation. This patch removes those spurious aliases.
Tested (compilation only) with build-many-glibcs.py for
sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.S
(__lllrint): Remove alias.
(lllrint): Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.S
(__lllrintf): Likewise.
(lllrintf): Likewise.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes sparc libm function implementations use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py for all its sparc configurations that
installed stripped shared libraries are unchanged by the patch.
* sysdeps/sparc/sparc32/fpu/s_copysignf.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/fpu/s_fabsf.S: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.S:
Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf.S: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.c: Include
<libm-alias-float.h>.
(fdimf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaf.c: Include
<libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf.S:
Include <libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_lrintf.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.c: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaf.c: Include
<libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf.c: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
(llrintf): Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf.c: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf.c: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/s_copysignf.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/s_fabsf.c: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/s_lrintf.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
(llrintf): Likewise.
* sysdeps/sparc/sparc64/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes sparc libm function implementations use
libm_alias_double to define function aliases (with consequent
simplification where compat symbol handling is now done by those
macros rather than locally in architecture-specific code).
Tested with build-many-glibcs.py for all its sparc configurations that
installed stripped shared libraries are unchanged by the patch.
* sysdeps/sparc/sparc32/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/sparc/sparc32/fpu/s_fabs.S: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S:
Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.S: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c: Include
<libm-alias-double.h>.
(fdim): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fma.c: Include
<libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint.S:
Include <libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fabs.S: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_nearbyint.S: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.c: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fma.c: Include
<libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint.c: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
(llrint): Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint.c: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint.c: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/s_fabs.c: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/s_lrint.S: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
(llrint): Likewise.
* sysdeps/sparc/sparc64/fpu/s_nearbyint.S: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
The --disable-multi-arch case of sparcv9 libm is missing a fabsl
compat symbol for when long double had the same ABI as double. This
patch adds the missing compat symbol to this implementation. As my
fix for other instances of this missing compat symbol postdates the
last release, I'm considering this as being part of bug 22229 that was
missing from my previous fix rather than as a separate issue, and so
as not needing a new bug report in Bugzilla.
Tested (compilation only) with build-many-glibcs.py for
sparcv9-linux-gnu --disable-multi-arch.
[BZ #22229]
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fabs.S: Include
<math_ldbl_opt.h>.
(fabsl): Define as compat symbol at version GLIBC_2_0 for libm.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes x86_64 libm function implementations use
libm_alias_float to define function aliases, or libm_alias_float_other
where the main name is defined with versioned_symbol.
Tested with the glibc testsuite for x86_64, and tested with
build-many-glibcs.py for all its x86_64 configurations that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/x86_64/fpu/multiarch/e_exp2f.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/e_expf.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/e_log2f.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/e_logf.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/e_powf.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/x86_64/fpu/multiarch/s_ceilf.c: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_floorf.c: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_fmaf.c: Include
<libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_nearbyintf.c: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_rintf.c: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/multiarch/s_truncf.c: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_copysignf.S: Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_cosf.S: Include <libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_fabsf.c: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_fmaxf.S: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_fminf.S: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_llrintf.S: Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
[!__ILP32__] (lrintf): Likewise.
* sysdeps/x86_64/fpu/s_sincosf.S: Include <libm-alias-float.h>.
(sincosf): Define using libm_alias_float.
* sysdeps/x86_64/fpu/s_sinf.S: Include <libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/x86_64/x32/fpu/s_lrintf.S: Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes x86_64 libm function implementations use
libm_alias_double to define function aliases.
Tested with the glibc testsuite for x86_64, and tested with
build-many-glibcs.py for all its x86_64 configurations that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/x86_64/fpu/multiarch/s_atan.c: Include
<libm-alias-double.h>.
(atan): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_ceil.c: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_floor.c: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_fma.c: Include
<libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_nearbyint.c: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_rint.c: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_sin.c: Include
<libm-alias-double.h>.
(sin): Define using libm_alias_double.
(cos): Likewise.
* sysdeps/x86_64/fpu/multiarch/s_tan.c: Include
<libm-alias-double.h>.
(tan): Define using libm_alias_double.
* sysdeps/x86_64/fpu/multiarch/s_trunc.c: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_copysign.S: Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_fabs.c: Include <libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_fmax.S: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_fmin.S: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/x86_64/fpu/s_llrint.S: Include <libm-alias-double.h>.
(llrint): Define using libm_alias_double.
[!__ILP32__] (lrint): Likewise.
* sysdeps/x86_64/x32/fpu/s_lrint.S: Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_rint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_rintf-generic and s_rint-generic
objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_lrint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_lrint-generic and s_lrint-generic
objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_nearbyint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_nearbyint-generic and
s_nearbyintf-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_finite{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile (sysdeps_calls):
Add s_finitef-generic and s_finite-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_isinf{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile (sysdeps_calls):
Add isinff-generic and s_isinf-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
(s_isnan{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile (sysdeps_calls):
Add s_isnanf-generic and s_isnan-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
(s_signbit{f}-generic.S).
It also simplifies the multiarch Makefile by moving the common objects
from libm-sysdeps_routines and sysdeps_routines to a new sysdeps_call
rule and including it where required with the correct prefix.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc-ifunc.h (sparc_libm_ifunc_redirected): New
macro.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile (sysdep_calls): New
rule.
(sysdep_routines): Use sysdep_calls as base.
(libm-sysdep_routines): Add generic rule for symbols shared with
libc. Add s_signbit-generic and s_signbitf-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch assumes VIS3 support by binutils, which is supported since
version 2.22. This leads to some code simplification, mostly on
multiarch build where there is only one variant instead of previously
two (whether binutils supports VIS3 instructions or not).
For multiarch files where HAVE_AS_VIS3_SUPPORT was checked and
the default implementation was built with a different name, a new
file with (implementation with -generic appended) is added.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* config.h.in (HAVE_AS_VIS3_SUPPORT): Remove check for VIS3 support.
* sysdeps/sparc/configure.ac (HAVE_AS_VIS3_SUPPORT): Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c: Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.c: Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fma.c: Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fmaf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fma.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Likewise.
* sysdeps/sparc/sparc-ifunc.h [!HAVE_AS_VIS3_SUPPORT]
(SPARC_ASM_VIS3_IFUNC, SPARC_ASM_VIS3_VIS2_IFUNC): Remove macros.
* sysdeps/sparc/sparc32/sparcv9/Makefile [$(have-as-vis3) != yes]
(ASFLAGS.o, ASFLAGS-.os, ASFLAGS-.op, ASFLAGS-.oS): Remove rules.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
($(have-as-vis3) == yes): Remove conditional.
* sysdeps/sparc/sparc64/Makefile (($(have-as-vis3) == yes)):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-generic.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf-generic.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fma-generic.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaf-generic.c: New
file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fma-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaf-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-generic.c: New file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sysdeps/hppa/start.S (_start): Check PIC instead of SHARED. Load
address of $global$ into %dp register earlier. Use pc-relative
instruction sequence for PIC case.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes i386 libm function implementations use
libm_alias_float (or libm_alias_float_other in cases where the main
symbol name is defined with versioned_symbol) to define function
aliases.
Tested with build-many-glibcs.py for all its i386 configurations that
installed stripped shared libraries are unchanged by the patch, as
well as running the full glibc testsuite for i686.
* sysdeps/i386/fpu/s_asinhf.S: Include <libm-alias-float.h>.
(asinhf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_atanf.S: Include <libm-alias-float.h>.
(atanf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_cbrtf.S: Include <libm-alias-float.h>.
(cbrtf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_ceilf.S: Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_copysignf.S: Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_expm1f.S: Include <libm-alias-float.h>.
(expm1f): Define using libm_alias_float.
* sysdeps/i386/fpu/s_fabsf.S: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_floorf.S: Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_fmaxf.S: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_fminf.S: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_frexpf.S: Include <libm-alias-float.h>.
(frexpf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_llrintf.S: Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_logbf.S: Include <libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_lrintf.S: Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_nearbyintf.S: Include <libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_remquof.S: Include <libm-alias-float.h>.
(remquof): Define using libm_alias_float.
* sysdeps/i386/fpu/s_rintf.S: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/i386/fpu/s_truncf.S: Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/multiarch/e_exp2f.c: Include
<libm-alias-float.h>.
(exp2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/e_expf.c: Include
<libm-alias-float.h>.
(expf): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/e_log2f.c: Include
<libm-alias-float.h>.
(log2f): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/e_logf.c: Include
<libm-alias-float.h>.
(logf): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/e_powf.c: Include
<libm-alias-float.h>.
(powf): Define using libm_alias_float, or libm_alias_float_other
if [SHARED].
* sysdeps/i386/i686/fpu/multiarch/s_cosf.c: Include
<libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/multiarch/s_sincosf.c: Include
<libm-alias-float.h>.
(sincosf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/multiarch/s_sinf.c: Include
<libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/s_fmaxf.S: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/i386/i686/fpu/s_fminf.S: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/i386/i686/multiarch/s_fmaf.c: Include
<libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes i386 libm function implementations use
libm_alias_double to define function aliases.
Tested with build-many-glibcs.py for all its i386 configurations that
installed stripped shared libraries are unchanged by the patch, as
well as running the full glibc testsuite for i686.
* sysdeps/i386/fpu/s_asinh.S: Include <libm-alias-double.h>.
(asinh): Define using libm_alias_double.
* sysdeps/i386/fpu/s_atan.S: Include <libm-alias-double.h>.
(atan): Define using libm_alias_double.
* sysdeps/i386/fpu/s_cbrt.S: Include <libm-alias-double.h>.
(cbrt): Define using libm_alias_double.
* sysdeps/i386/fpu/s_ceil.S: Include <libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/i386/fpu/s_copysign.S: Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/i386/fpu/s_expm1.S: Include <libm-alias-double.h>.
(expm1): Define using libm_alias_double.
* sysdeps/i386/fpu/s_fabs.S: Include <libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/i386/fpu/s_fdim.c: Include <libm-alias-double.h>.
(fdim): Define using libm_alias_double.
* sysdeps/i386/fpu/s_floor.S: Include <libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/i386/fpu/s_fmax.S: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/i386/fpu/s_fmin.S: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/i386/fpu/s_frexp.S: Include <libm-alias-double.h>.
(frexp): Define using libm_alias_double.
* sysdeps/i386/fpu/s_llrint.S: Include <libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/i386/fpu/s_logb.S: Include <libm-alias-double.h>.
(logb): Define using libm_alias_double.
* sysdeps/i386/fpu/s_lrint.S: Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/i386/fpu/s_nearbyint.S: Include <libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/i386/fpu/s_remquo.S: Include <libm-alias-double.h>.
(remquo): Define using libm_alias_double.
* sysdeps/i386/fpu/s_rint.S: Include <libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/i386/fpu/s_trunc.S: Include <libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/i386/i686/fpu/s_fmax.S: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/i386/i686/fpu/s_fmin.S: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/i386/i686/multiarch/s_fma.c: Include <libm-alias-double.h>.
(fma): Define using libm_alias_double.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes an s390 libm function implementation use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py for s390-linux-gnu and
s390x-linux-gnu that installed stripped shared libraries are unchanged
by the patch.
* sysdeps/s390/fpu/s_fmaf.c: Include <libm-alias-float.h>.
[!__fmaf] (fmaf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes s390 libm function implementations use
libm_alias_double to define function aliases. This allows
sysdeps/unix/sysv/linux/s390/fpu/s_fma.c to be removed, as
libm_alias_double handles symbol versioning for long double compat
symbols.
Tested with build-many-glibcs.py for s390-linux-gnu and
s390x-linux-gnu that installed stripped shared libraries are unchanged
by the patch.
* sysdeps/s390/fpu/s_fma.c: Include <libm-alias-double.h>.
[!__fma] (fma): Define using libm_alias_double.
* sysdeps/unix/sysv/linux/s390/fpu/s_fma.c: Remove.
This patch refactor the SPARC64 ifunc selector to a C implementation.
The x86_64 implementation is used as default, which resulted in common
definitions (ifunc-init.h) used on both architectures. No functional
change is expected, including ifunc resolution rules.
Checked on sparc64-linux-gnu, sparcv9-linux-gnu and x86_64-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy-ultra1.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/mempcpy.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/ifunc-memcpy.h: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy-ultra1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/mempcpy.c: Likewise.
* sysdeps/sparc/sparc-ifunc.h (sparc_libc_ifunc_redirected): New
macro.
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile
[$(subdir) = string] (sysdep_routines): Add memcpy-ultra1.
* sysdeps/sparc/sparc64/multiarch/Makefile [$(subdir) = string]
(sysdep_routines): Add memcpy-ultra1.
* sysdeps/sparc/sparc64/multiarch/memcpy.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes alpha libm function implementations use
libm_alias_float macros to define function aliases. In the case of
the ABI compatibility for complex functions, libm_alias_float_other is
used, with the cfloat_versions macro adjusted to take a function name
argument without the trailing 'f' to facilitate this, and
cfloat_versions dealing with calling libm_alias_float_other (except
for clog10f, which doesn't use that macro because of the complexity
associated with __clog10f also being exported).
Tested with build-many-glibcs.py for alpha-linux-gnu that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/alpha/fpu/cfloat-compat.h: Include <libm-alias-float.h>.
(cfloat_versions): Take function argument without trailing 'f'.
Call libm_alias_float_other.
* sysdeps/alpha/fpu/cabsf.c: Update call to cfloat_versions.
* sysdeps/alpha/fpu/cargf.c: Likewise.
* sysdeps/alpha/fpu/cimagf.c: Likewise.
* sysdeps/alpha/fpu/conjf.c: Likewise.
* sysdeps/alpha/fpu/crealf.c: Likewise.
* sysdeps/alpha/fpu/s_cacosf.c: Likewise.
* sysdeps/alpha/fpu/s_cacoshf.c: Likewise.
* sysdeps/alpha/fpu/s_casinf.c: Likewise.
* sysdeps/alpha/fpu/s_casinhf.c: Likewise.
* sysdeps/alpha/fpu/s_catanf.c: Likewise.
* sysdeps/alpha/fpu/s_catanhf.c: Likewise.
* sysdeps/alpha/fpu/s_ccosf.c: Likewise.
* sysdeps/alpha/fpu/s_ccoshf.c: Likewise.
* sysdeps/alpha/fpu/s_cexpf.c: Likewise.
* sysdeps/alpha/fpu/s_clogf.c: Likewise.
* sysdeps/alpha/fpu/s_cpowf.c: Likewise.
* sysdeps/alpha/fpu/s_cprojf.c: Likewise.
* sysdeps/alpha/fpu/s_csinf.c: Likewise.
* sysdeps/alpha/fpu/s_csinhf.c: Likewise.
* sysdeps/alpha/fpu/s_csqrtf.c: Likewise.
* sysdeps/alpha/fpu/s_ctanf.c: Likewise.
* sysdeps/alpha/fpu/s_ctanhf.c: Likewise.
* sysdeps/alpha/fpu/s_clog10f.c: Include <libm-alias-float.h>.
(clog10f): Use libm_alias_float_other.
* sysdeps/alpha/fpu/s_ceilf.c: Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_copysignf.c: Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_fabsf.c: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_floorf.c: Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_fmax.S: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_fmin.S: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_lrintf.c: Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
(llrintf): Likewise.
* sysdeps/alpha/fpu/s_lroundf.c: Include <libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
(llroundf): Likewise.
* sysdeps/alpha/fpu/s_rintf.c: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/alpha/fpu/s_truncf.c: Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes aarch64 libm function implementations use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py for aarch64-linux-gnu that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/aarch64/fpu/s_ceilf.c: Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_floorf.c: Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_fmaf.c: Include <libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_fmaxf.c: Include <libm-alias-float.h>.
(fmaxf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_fminf.c: Include <libm-alias-float.h>.
(fminf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_llrintf.c: Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_llroundf.c: Include <libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_lrintf.c: Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_lroundf.c: Include <libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_nearbyintf.c: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_rintf.c: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_roundf.c: Include <libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/aarch64/fpu/s_truncf.c: Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes alpha libm function implementations use
libm_alias_double to define function aliases. This also simplifies
the code because the compatibility for long double = double is handled
by libm_alias_double instead of locally in each source file.
Tested with build-many-glibcs.py for alpha-linux-gnu that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/alpha/fpu/s_ceil.c: Include <libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_copysign.c: Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_fabs.c: Include <libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_floor.c: Include <libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_fmax.S: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_fmin.S: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_lrint.c: Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
(llrint): Likewise.
* sysdeps/alpha/fpu/s_lround.c: Include <libm-alias-double.h>.
(lround): Define using libm_alias_double.
(llround): Likewise.
* sysdeps/alpha/fpu/s_rint.c: Include <libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/alpha/fpu/s_trunc.c: Include <libm-alias-double.h>.
(trunc): Define using libm_alias_double.
This patch makes the ldbl-opt libm_alias_double implementation support
use from .S sources, by adding a semicolon after its use of
weak_alias.
Tested (compilation only) with build-many-glibcs.py for
alpha-linux-gnu, in conjunction with a patch introducing uses of
libm_alias_double in alpha .S files.
* sysdeps/ieee754/ldbl-opt/libm-alias-double.h
(libm_alias_double_r): Add semicolon after weak_alias call.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes aarch64 libm function implementations use
libm_alias_double to define function aliases.
Tested with build-many-glibcs.py for aarch64-linux-gnu that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/aarch64/fpu/s_ceil.c: Include <libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_floor.c: Include <libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_fma.c: Include <libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_fmax.c: Include <libm-alias-double.h>.
(fmax): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_fmin.c: Include <libm-alias-double.h>.
(fmin): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_llrint.c: Include <libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_llround.c: Include <libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_lrint.c: Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_lround.c: Include <libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_nearbyint.c: Include <libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_rint.c: Include <libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_round.c: Include <libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/aarch64/fpu/s_trunc.c: Include <libm-alias-double.h>.
(trunc): Define using libm_alias_double.
This patch continues filling out TS 18661-3 support by adding *f64x
function aliases on platforms with _Float64x support. (It so happens
the set of such platforms is exactly the same as the set of platforms
with _Float128 support, although on x86_64, x86 and ia32 the _Float64x
format is Intel extended rather than binary128.) The API provided
corresponds exactly to that provided for _Float128, mostly coming from
TS 18661-3. As these functions always alias those for another type
(long double, _Float128 or both), __* function names are not provided,
as in other cases of alias types.
Given the preparation done in previous patches, this one just enables
the feature via Makeconfig and bits/floatn.h, adds symbol versions,
and updates documentation and ABI baselines. The symbol versions are
present unconditionally as GLIBC_2.27 in the relevant Versions files,
as it's OK for those to specify versions for functions that may not be
present in some configurations; no additional complexity is needed
unless in future some configuration gains support for this type that
didn't have such support in 2.27. The Makeconfig additions for ia64
and x86 aren't strictly needed, as those configurations also get
float64x-alias-fcts definitions from
sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given
that _Float64x is not _Float128 for those configurations.
A libm-test-ulps update for x86 is included. This is because
bits/mathinline.h does not have _Float64x support added and for two
functions the use of out-of-line functions results in increased ulps
(ifloat64x shares ulps with ildouble / ifloat128 as appropriate).
Given that we'd like generally to eliminate bits/mathinline.h
optimizations, preferring to have such optimizations in GCC instead,
it seems reasonable not to add such support there for new types. GCC
support for _FloatN / _FloatNx built-in functions is limited, but has
been improved in GCC 8, and at some point I hope the full set of libm
built-in functions in GCC, and other optimizations with
per-floating-type aspects, will be enabled for all _FloatN / _FloatNx
types.
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable.
* sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/x86/Makeconfig: New file.
* bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* bits/floatn.h (__HAVE_FLOAT64X): New macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X):
Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64x.
* math/Versions (GLIBC_2.27): Add _Float64x functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
Combine the four places where link maps are sorted into a single function.
This also moves the logic to skip the first map (representing the main
binary) to the callers.
This patch uses libm_alias_float128 in place of weak_alias more in
sysdeps/ieee754/float128, in preparation for defining _Float64x
aliases when appropriate.
Tested for x86_64, and for powerpc64le (compilation only) with
build-many-glibcs.py in conjunction with _Float64x support patches.
* sysdeps/ieee754/float128/s_fromfpf128.c (fromfpf128): Define
using libm_alias_float128.
* sysdeps/ieee754/float128/s_fromfpxf128.c (fromfpxf128):
Likewise.
* sysdeps/ieee754/float128/s_setpayloadf128.c (setpayloadf128):
Likewise.
* sysdeps/ieee754/float128/s_setpayloadsigf128.c
(setpayloadsigf128): Likewise.
* sysdeps/ieee754/float128/s_ufromfpf128.c (ufromfpf128):
Likewise.
* sysdeps/ieee754/float128/s_ufromfpxf128.c (ufromfpxf128):
Likewise.
Supporting _Float64x on powerpc64le means that tests of that type need
to use -mfloat128 just like tests of _Float128. This patch adds the
necessary uses of that option.
Tested (compilation only) for powerpc64le with build-many-glibcs.py,
in conjunction with _Float64x support patches.
* sysdeps/powerpc/powerpc64le/Makefile ($(foreach
suf,$(all-object-suffixes),$(objpfx)test-float64x%$(suf))): Add
-mfloat128 to CFLAGS.
($(foreach
suf,$(all-object-suffixes),$(objpfx)test-ifloat64x%$(suf))):
Likewise.
(CFLAGS-libm-test-support-float64x.c): New variable.
($(objpfx)test-float64x% $(objpfx)test-ifloat64x%): Add
$(f128-loader-link) to gnulib-tests.
This patch adds support for libm_alias_ldouble and libm_alias_float128
to create *f64x function aliases when appropriate.
Making such aliases work for functions defined in assembly sources
requires adding some semicolons after weak_alias calls in alias macro
definitions. For C, semicolons are already present in the macros
called when required, but a GNU C extension allows excess semicolons
at file scope in a source file (and glibc already uses this), so it is
OK to have extra semicolons present in the macro definitions. For
assembly sources, making multiple alias macro calls from a single
macro expansion means there are no newlines between the calls, so an
explicit separator is needed. If hppa were to have .S sources in
libm, a more complicated approach would be needed that used
ASM_LINE_SEP when building assembly sources but not for C, but right
now there are no such sources so just using a semicolon (as already
present unconditionally in some such macro expansions) suffices.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* sysdeps/generic/libm-alias-float128.h: Include <bits/floatn.h>.
(libm_alias_float128_other_r): If
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE], define f64x
alias.
(libm_alias_float128_r): Add semicolon after weak_alias call.
* sysdeps/generic/libm-alias-ldouble.h
(libm_alias_ldouble_other_r_f128): New macro.
(libm_alias_ldouble_other_r_f64x): Likewise.
(libm_alias_ldouble_other_r): Use libm_alias_ldouble_other_r_f128
and libm_alias_ldouble_other_r_f64x.
(libm_alias_ldouble_r): Add semicolon after weak_alias call.
* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h
(libm_alias_ldouble_other_r_f128): New macro.
(libm_alias_ldouble_other_r_f64x): Likewise.
(libm_alias_ldouble_other_r): Use libm_alias_ldouble_other_r_f128
and libm_alias_ldouble_other_r_f64x.
This patch adds support for defining strfromf64x as a function alias
(of strfroml or strfromf128, as appropriate) when _Float64x is
supported.
Tested for x86_64, including in conjunction with _Float64x support
patches, and also tested build for other configurations (in
conjunction with _Float64x support patches) with build-many-glibcs.py
to cover the various different files needing updating to define these
aliases.
* stdlib/strfroml.c: Always include <stdlib.h>.
[__HAVE_FLOAT64X_LONG_DOUBLE] (strfromf64x): Define and later
undefine as macro and define as weak alias.
* sysdeps/ieee754/float128/strfromf128.c: Include <bits/floatn.h>.
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE]: Include
<stdlib.h>.
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strfromf64x):
Define and later undefine as macro and define as weak alias.
This patch adds support for defining strtof64x, strtof64x_l, wcstof64
and wcstof64x_l function aliases when _Float64x is supported.
Tested for x86_64, including in conjunction with _Float64x support
patches, and also tested build for other configurations (in
conjunction with _Float64x support patches) with build-many-glibcs.py
to cover the various different files needing updating to define these
aliases.
* stdlib/strtold.c [__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
* sysdeps/ieee754/float128/strtof128.c: Include <bits/floatn.h>.
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/float128/strtof128_l.c
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT64X && !__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-128/strtold_l.c
[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-96/strtold_l.c
[__HAVE_FLOAT64X_LONG_DOUBLE] (strtof64x_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT64X_LONG_DOUBLE] (wcstof64x_l): Define and later
undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
math_private.h uses __MATH_TG in defining the min_of_type macro used
within libm, with min_of_type_<suffix> macros for each type. This
runs into problems with __MATH_TG expansions used with additional
_FloatN and _FloatNx type support, because those can end up
macro-expanding the FUNC argument to __MATH_TG before it gets
concatenated with a suffix - meaning that min_of_type_ can't
simultaneously be the macro name for double, and a prefix to other
macro names, since the latter case requires such premature macro
expansion not to occur. (This is not a problem for the uses of
__MATH_TG in installed headers because FUNC there is a function name
in the implementation namespace, and the suffixes themselves don't get
macro-expanded.)
This patch fixes the problem by making min_of_type_<suffix> macros
function-like, so no macro expansion occurs when min_of_type_ is
expanded on its own as a macro argument, only later when followed by
() after expansion.
Tested for x86_64, including in conjunction with _Float64x support
patches.
* sysdeps/generic/math_private.h (min_of_type_f): Make into a
function-like macro.
(min_of_type_): Likewise.
(min_of_type_l): Likewise.
(min_of_type_f128): Likewise.
(min_of_type): Pass () as last argument of __MATH_TG.
This header file enables sharing of portable declarations and
definitions across all Linux architectures, including hppa (which does
not use <bits/mman-linux.h>).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
As described in BZ#22457 an interpose malloc can free an invalid
pointer for fallback preadv implementation. Fortunately this is
just and issue on microblaze-linux-gnu running kernels older than
3.15. This patch fixes it by calling mmap/unmap instead of
posix_memalign/ free.
Checked on microblaze-linux-gnu check with run-built-tests=no and
by using the sysdeps/posix implementation on x86_64-linux-gnu (just
for sanity test where it shown no regression).
[BZ #22457]
* sysdeps/posix/preadv_common.c (PREADV): Use mmap/munmap instead of
posix_memalign/free.
* sysdeps/posix/pwritev_common.c (PWRITEV): Likewise.
Continuing the preparation for additional _FloatN / _FloatNx aliases,
this patch makes long double functions in sysdeps/ia64/fpu use
libm_alias_ldouble macros, so that they can have _Float64x aliases
added in future.
Most ia64 libm functions are defined using ia64-specific macros in
libm-symbols.h. These are left unchanged, with libm-alias-ldouble.h
included from libm-symbols.h (and the expectation that other
libm-alias-*.h headers will be included from there as well in future),
and libm_alias_ldouble_other then being used in most cases to define
aliases for any additional types (currently the empty set). Functions
that used weak_alias are converted to use libm_alias_ldouble.
Tested (compilation only) with build-many-glibcs.py for ia64,
including that installed stripped shared libraries are unchanged by
the patch.
* sysdeps/ia64/fpu/libm-symbols.h: Include <libm-alias-ldouble.h>.
* sysdeps/ia64/fpu/e_acoshl.S (acoshl): Use
libm_alias_ldouble_other.
* sysdeps/ia64/fpu/e_acosl.S (acosl): Likewise.
* sysdeps/ia64/fpu/e_asinl.S (asinl): Likewise.
* sysdeps/ia64/fpu/e_atanhl.S (atanhl): Likewise.
* sysdeps/ia64/fpu/e_coshl.S (coshl): Likewise.
* sysdeps/ia64/fpu/e_exp10l.S (exp10l): Likewise.
* sysdeps/ia64/fpu/e_exp2l.S (exp2l): Likewise.
* sysdeps/ia64/fpu/e_fmodl.S (fmodl): Likewise.
* sysdeps/ia64/fpu/e_hypotl.S (hypotl): Likewise.
* sysdeps/ia64/fpu/e_lgammal_r.c (lgammal_r): Define using
libm_alias_ldouble_r.
* sysdeps/ia64/fpu/e_log2l.S (log2l): Use
libm_alias_ldouble_other.
* sysdeps/ia64/fpu/e_logl.S (logl): Likewise.
(log10l): Likewise.
* sysdeps/ia64/fpu/e_powl.S (powl): Likewise.
* sysdeps/ia64/fpu/e_remainderl.S (remainderl): Likewise.
* sysdeps/ia64/fpu/e_sinhl.S (sinhl): Likewise.
* sysdeps/ia64/fpu/e_sqrtl.S (sqrtl): Likewise.
* sysdeps/ia64/fpu/libm_sincosl.S (sincosl): Likewise.
* sysdeps/ia64/fpu/s_asinhl.S (asinhl): Likewise.
* sysdeps/ia64/fpu/s_atanl.S (atanl): Likewise.
(atan2l): Likewise.
* sysdeps/ia64/fpu/s_cbrtl.S (cbrtl): Likewise.
* sysdeps/ia64/fpu/s_ceill.S (ceill): Likewise.
* sysdeps/ia64/fpu/s_copysign.S (copysignl): Define using
libm_alias_ldouble.
* sysdeps/ia64/fpu/s_cosl.S (sinl): Use libm_alias_ldouble_other.
(cosl): Likewise.
* sysdeps/ia64/fpu/s_erfcl.S (erfcl): Likewise.
* sysdeps/ia64/fpu/s_erfl.S (erfl): Likewise.
* sysdeps/ia64/fpu/s_expm1l.S (expm1l): Likewise.
(expl): Likewise.
* sysdeps/ia64/fpu/s_fabsl.S (fabsl): Likewise.
* sysdeps/ia64/fpu/s_fdiml.S (fdiml): Likewise.
* sysdeps/ia64/fpu/s_floorl.S (floorl): Likewise.
* sysdeps/ia64/fpu/s_fmal.S (fmal): Likewise.
* sysdeps/ia64/fpu/s_fmaxl.S (fmaxl): Likewise.
* sysdeps/ia64/fpu/s_frexpl.c (frexpl): Likewise.
* sysdeps/ia64/fpu/s_ldexpl.c (ldexpl): Likewise.
* sysdeps/ia64/fpu/s_log1pl.S (log1pl): Likewise.
* sysdeps/ia64/fpu/s_logbl.S (logbl): Likewise.
* sysdeps/ia64/fpu/s_modfl.S (modfl): Likewise.
* sysdeps/ia64/fpu/s_nearbyintl.S (nearbyintl): Define using
libm_alias_ldouble.
* sysdeps/ia64/fpu/s_nextafterl.S (nextafterl): Use
libm_alias_ldouble_other.
* sysdeps/ia64/fpu/s_rintl.S (rintl): Likewise.
* sysdeps/ia64/fpu/s_roundl.S (roundl): Likewise.
* sysdeps/ia64/fpu/s_scalbnl.c (scalbnl): Define using
libm_alias_ldouble.
* sysdeps/ia64/fpu/s_tanhl.S (tanhl): Use
libm_alias_ldouble_other.
* sysdeps/ia64/fpu/s_tanl.S (tanl): Likewise.
* sysdeps/ia64/fpu/s_truncl.S (truncl): Likewise.
* sysdeps/ia64/fpu/w_lgammal_main.c
[BUILD_LGAMMA && !USE_AS_COMPAT] (lgammal): Likewise.
* sysdeps/ia64/fpu/w_tgammal_compat.S (tgammal): Likewise.
Since
commit 8b0e795aaa
Author: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Date: Wed Nov 1 11:49:05 2017 -0200
Simplify Linux sig{timed}wait{info} implementations
sigwait can fail with EINTR. Applications do not expect that, and the
error code is not documented in POSIX or the manual pages.
This commit restores the previous behavior by retrying the system call
on EINTR. It also returns the error code, not -1, on the remaing
errors.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The system call is somewhat obscure because it is closely related
to file descriptor sealing. However, it is also the recommended
way to create alias mappings, which is why it has more general use.
No emulation is provided. Except for the name of the
/proc/self/fd links, it would be possible to implement an
approximation using O_TMPFILE and tmpfs, but this does not appear
to be worth the added complexity.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
sysdeps/sparc/sparc64/soft-fp has files s_frexpl.c, s_scalblnl.c and
s_scalbnl.c that are never used because the ldbl-128 versions always
come first in the sysdeps directory ordering. This patch removes the
unused files.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* sysdeps/sparc/sparc64/soft-fp/s_frexpl.c: Remove file.
* sysdeps/sparc/sparc64/soft-fp/s_scalblnl.c: Likewise.
* sysdeps/sparc/sparc64/soft-fp/s_scalbnl.c: Likewise.
Building glibc with current mainline GCC fails, among other reasons,
because of an error for use of strlen on the nonstring ut_user field.
This patch changes the problem code in getlogin_r to use __strnlen
instead. It also needs to set the trailing NUL byte of the result
explicitly, because of the case where ut_user does not have such a
trailing NUL byte (but the result should always have one).
Tested for x86_64. Also tested that, in conjunction with
<https://sourceware.org/ml/libc-alpha/2017-11/msg00797.html>, it fixes
the build for arm with mainline GCC.
[BZ #22447]
* sysdeps/unix/getlogin_r.c (__getlogin_r): Use __strnlen not
strlen to compute length of ut_user and set trailing NUL byte of
result explicitly.
This patch updates the hppa bits/mman.h based on Linux 4.14. Some
MADV_* macros are removed in Linux 4.14 as unused/unimplemented, so
this patch removes them from glibc, while adding two new macros added
in Linux 4.14.
Tested (compilation only) for hppa with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/hppa/bits/mman.h
[__USE_MISC] (MADV_SPACEAVAIL): Remove macro.
[__USE_MISC] (MADV_VPS_PURGE): Likewise.
[__USE_MISC] (MADV_VPS_INHERIT): Likewise.
[__USE_MISC] (MADV_HWPOISON): New macro.
[__USE_MISC] (MADV_SOFT_OFFLINE): Likewise.
GDB failed to detect the outermost frame while showing the backtrace
within a thread:
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
Before this patch, the start routines like thread_start had no cfi information.
GDB is then using the prologue unwinder if no cfi information is available.
This unwinder tries to unwind r15 and stops e.g. if r15 was updated or
on some jump-instructions.
On older glibc-versions (before commit "Remove cached PID/TID in clone"
c579f48edb), the thread_start function used
such a jump-instruction and GDB did not fail with an error.
This patch adds cfi information for _start, thread_start and __makecontext_ret
and marks r14 as undefined which marks the frame as outermost frame and GDB
stops the backtrace. Also tested different gcc versions in order to test
_Unwind_Backtrace() in libgcc as this is used by backtrace() in glibc.
ChangeLog:
* sysdeps/s390/s390-64/start.S (_start): Add cfi information for r14.
* sysdeps/s390/s390-32/start.S: (_start): Likewise
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S
(thread_start): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S
(thread_start): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/__makecontext_ret.S
(__makecontext_ret): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S
(__makecontext_ret): Likewise.
Linux commit ID cba6ac4869e45cc93ac5497024d1d49576e82666 reserved a new
bit for a scenario where transactional memory is available, but the
suspended state is disabled.
* sysdeps/powerpc/bits/hwcap.h (PPC_FEATURE2_HTM_NO_SUSPEND): New
macro.
* sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_cap_flags): Add
htm-no-suspend.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This patch continues the preparation for additional _FloatN / _FloatNx
function aliases by using libm_alias_ldouble for sysdeps/x86_64/fpu
long double functions, so that they can have _Float64x aliases added
in future.
Tested for x86_64, including build-many-glibcs.py tests that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/x86_64/fpu/e_expl.S: Include <libm-alias-ldouble.h>.
[USE_AS_EXPM1L] (expm1l): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_ceill.S: Include <libm-alias-ldouble.h>.
(ceill): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_copysignl.S: Include
<libm-alias-ldouble.h>.
(copysignl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_fabsl.S: Include <libm-alias-ldouble.h>.
(fabsl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_floorl.S: Include <libm-alias-ldouble.h>.
(floorl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_fmaxl.S: Include <libm-alias-ldouble.h>.
(fmaxl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_fminl.S: Include <libm-alias-ldouble.h>.
(fminl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_llrintl.S: Include <libm-alias-ldouble.h>.
(llrintl): Define using libm_alias_ldouble.
(lrintl): Likewise.
* sysdeps/x86_64/fpu/s_nearbyintl.S: Include
<libm-alias-ldouble.h>.
(nearbyintl): Define using libm_alias_ldouble.
* sysdeps/x86_64/fpu/s_truncl.S: Include <libm-alias-ldouble.h>.
(truncl): Define using libm_alias_ldouble.
* sysdeps/x86_64/x32/fpu/s_lrintl.S: Include
<libm-alias-ldouble.h>.
(lrintl): Define using libm_alias_ldouble.
This patch continues the preparation for additional _FloatN / _FloatNx
function aliases by using libm_alias_ldouble for sysdeps/i386/fpu long
double functions, so that they can have _Float64x aliases added in
future.
Tested for x86_64 (which includes some of these implementations) and
x86, including build-many-glibcs.py tests that installed stripped
shared libraries are unchanged by the patch.
* sysdeps/i386/fpu/e_expl.S: Include <libm-alias-ldouble.h>.
[USE_AS_EXPM1L] (expm1l): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_asinhl.S: Include <libm-alias-ldouble.h>.
(asinhl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_atanl.c: Include <libm-alias-ldouble.h>.
(atanl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_cbrtl.S: Include <libm-alias-ldouble.h>.
(cbrtl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_ceill.S: Include <libm-alias-ldouble.h>.
(ceill): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_copysignl.S: Include <libm-alias-ldouble.h>.
(copysignl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_fabsl.S: Include <libm-alias-ldouble.h>.
(fabsl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_floorl.S: Include <libm-alias-ldouble.h>.
(floorl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_fmaxl.S: Include <libm-alias-ldouble.h>.
(fmaxl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_fminl.S: Include <libm-alias-ldouble.h>.
(fminl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_frexpl.S: Include <libm-alias-ldouble.h>.
(frexpl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_llrintl.S: Include <libm-alias-ldouble.h>.
(llrintl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_logbl.c: Include <libm-alias-ldouble.h>.
(logbl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_lrintl.S: Include <libm-alias-ldouble.h>.
(lrintl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_nearbyintl.S: Include <libm-alias-ldouble.h>.
(nearbyintl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_nextafterl.c: Include <libm-alias-ldouble.h>.
(nextafterl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_remquol.S: Include <libm-alias-ldouble.h>.
(remquol): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_rintl.c: Include <libm-alias-ldouble.h>.
(rintl): Define using libm_alias_ldouble.
* sysdeps/i386/fpu/s_truncl.S: Include <libm-alias-ldouble.h>.
(truncl): Define using libm_alias_ldouble.
* sysdeps/i386/i686/fpu/s_fmaxl.S: Include <libm-alias-ldouble.h>.
(fmaxl): Define using libm_alias_ldouble.
* sysdeps/i386/i686/fpu/s_fminl.S: Include <libm-alias-ldouble.h>.
(fminl): Define using libm_alias_ldouble.
Further _FloatN / _FloatNx type alias support will involve making
architecture-specific .S files use the common macros for libm function
aliases. Making them use those macros will also serve to simplify
existing code for aliases / symbol versions in various cases, similar
to such simplifications for ldbl-opt code.
The libm-alias-*.h files sometimes need to include <bits/floatn.h> to
determine which aliases they should define. At present, this does not
work for inclusion from .S files because <bits/floatn.h> can define
typedefs for old compilers. This patch changes all the
<bits/floatn.h> and <bits/floatn-common.h> headers to include
__ASSEMBLER__ conditionals. Those conditionals disable everything
related to C syntax in the __ASSEMBLER__ case, not just the problem
typedefs, as that seemed cleanest. The __HAVE_* definitions remain in
the __ASSEMBLER__ case, as those provide information that is required
to define the correct set of aliases.
Tested with build-many-glibcs.py for a representative set of
configurations (x86_64-linux-gnu i686-linux-gnu ia64-linux-gnu
powerpc64le-linux-gnu mips64-linux-gnu-n64 sparc64-linux-gnu) with GCC
6. Also tested with GCC 6 for i686-linux-gnu in conjunction with
changes to use alias macros in .S files.
* bits/floatn-common.h [!__ASSEMBLER]: Disable everything related
to C syntax instead of availability and properties of types.
* bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/ia64/bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/mips/ieee754/bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/powerpc/bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/x86/bits/floatn.h [!__ASSEMBLER]: Likewise.
This patch adds the HWCAP_DCPOP macro from Linux 4.14 to the AArch64
bits/hwcap.h.
Tested (compilation only) for aarch64 with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h (HWCAP_DCPOP): New
macro.
GCC 4.9 and 5 do not generate a correct f{max,min}nm instruction for
__builtin_{fmax,fmin}{f} without -ffinite-math-only. It is clear a
compiler issue since the instruction can handle NaN and Inf correctly
and GCC6+ does not show this issue.
We can backport a fix to GCC 5, raise the minimum required GCC version
for aarch64 (since GCC 4.9 branch is now closed [1]) and/or add
configure check to check for this issue. However I think
-ffinite-math-only should be safe for these specific implementations
and it is a simpler solution.
Checked on aarch64-linux-gnu with GCC 5.3.1.
* sysdeps/aarch64/fpu/Makefile (CFLAGS-s_fmax.c, CFLAGS-s_fmaxf.c,
CFLAGS-s_fmin.c, CFLAGS-s_fminf.c): New rule: add -ffinite-math-only.
[1] https://gcc.gnu.org/ml/gcc/2016-08/msg00010.html
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
This patch adds ARPHRD_RAWIP from Linux 4.14 to the Linux
net/if_arp.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/net/if_arp.h (ARPHRD_RAWIP): New macro.
Linux 4.14 does not add any new syscalls; this patch updates the
version number in syscall-names.list to reflect that it's still
current for 4.14.
Tested for x86_64 (compilation with build-many-glibcs.py, using Linux
4.14).
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 4.14.
Update all sourceware links to https. The website redirects
everything to https anyway so let the web server do a bit less work.
The only reference that remains unchanged is the one in the old
ChangeLog, since it didn't seem worth changing it.
* NEWS: Update sourceware link to https.
* configure.ac: Likewise.
* crypt/md5test-giant.c: Likewise.
* dlfcn/bug-atexit1.c: Likewise.
* dlfcn/bug-atexit2.c: Likewise.
* localedata/README: Likewise.
* malloc/tst-mallocfork.c: Likewise.
* manual/install.texi: Likewise.
* nptl/tst-pthread-getattr.c: Likewise.
* stdio-common/tst-fgets.c: Likewise.
* stdio-common/tst-fwrite.c: Likewise.
* sunrpc/Makefile: Likewise.
* sysdeps/arm/armv7/multiarch/memcpy_impl.S: Likewise.
* wcsmbs/tst-mbrtowc2.c: Likewise.
* configure: Regenerate.
* INSTALL: Regenerate.
of the strncat and strncpy function that may result in truncating
the copied string before the terminating NUL. To avoid false positive
warnings for correct code that intentionally creates sequences of
characters that aren't guaranteed to be NUL-terminated, arrays that
are intended to store such sequences should be decorated with a new
nonstring attribute. This change add this attribute to Glibc and
uses it to suppress such false positives.
ChangeLog:
* misc/sys/cdefs.h (__attribute_nonstring__): New macro.
* sysdeps/gnu/bits/utmp.h (struct utmp): Use it.
* sysdeps/unix/sysv/linux/s390/bits/utmp.h (struct utmp): Same.
Add a new tst-ttyname test that includes several named sub-testcases.
This patch is ordered after the patches with the fixes that it tests for (to
avoid breaking `git bisect`), but for reference, here's how each relevant change
so far affected the testcases in this commit, starting with
15e9a4f378:
| | before | | make checks | don't |
| | 15e9a4f | 15e9a4f | consistent | bail |
|---------------------------------+---------+---------+-------------+-------|
| basic smoketest | PASS | PASS | PASS | PASS |
| no conflict, no match | PASS[1] | PASS | PASS | PASS |
| no conflict, console | PASS | FAIL! | FAIL | PASS! |
| conflict, no match | FAIL | PASS! | PASS | PASS |
| conflict, console | FAIL | FAIL | FAIL | PASS! |
| with readlink target | PASS | PASS | PASS | PASS |
| with readlink trap; fallback | FAIL | FAIL | FAIL | PASS! |
| with readlink trap; no fallback | FAIL | PASS! | PASS | PASS |
| with search-path trap | FAIL | FAIL | PASS! | PASS |
|---------------------------------+---------+---------+-------------+-------|
| | 4/9 | 5/9 | 6/9 | 9/9 |
[1]: 15e9a4f introduced a semantic that, under certain failure
conditions, ttyname sets errno=ENODEV, where previously it didn't
set errno; it's not quite fair to hold "before 15e9a4f" ttyname to
those new semantics. This testcase actually fails, but would have
passed if we tested for the old the semantics.
Each of the failing tests before 15e9a4f are all essentially the same bug: that
it returns a PTY slave with the correct minor device number, but from the wrong
devpts filesystem instance.
15e9a4f sought to fix this, but missed several of the cases that can cause this
to happen, and also broke the case where both the erroneous PTY and the correct
PTY exist.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Commit 15e9a4f378 introduced logic for ttyname()
sending back ENODEV to signal that we can't get a name for the TTY because we
inherited it from a different mount namespace.
However, just because we inherited it from a different mount namespace and it
isn't available at its original path, doesn't mean that its name is unknowable;
we can still try to find it by allowing the normal fall back on iterating
through devices.
An example scenario where this happens is with "/dev/console" in containers.
It's a common practice among container managers to allocate a PTY master/slave
pair in the host's mount namespace (the slave having a path like "/dev/pty/$X"),
bind mount the slave to "/dev/console" in the container's mount namespace, and
send the slave FD to a process in the container. Inside of the
container, the slave-end isn't available at its original path ("/dev/pts/$X"),
since the container mount namespace has a separate devpts instance from the host
(that path may or may not exist in the container; if it does exist, it's not the
same PTY slave device). Currently ttyname{_r} sees that the file at the
original "/dev/pts/$X" path doesn't match the FD passed to it, and fails early
and gives up, even though if it kept searching it would find the TTY at
"/dev/console". Fix that; don't have the ENODEV path force an early return
inhibiting the fall-back search.
This change is based on the previous patch that adds use of is_mytty in
getttyname and getttyname_r. Without that change, this effectively reverts
15e9a4f, which made us disregard the false similarity of file pointed to by
"/proc/self/fd/$Y", because if it doesn't bail prematurely then that file
("/dev/pts/$X") will just come up again anyway in the fall-back search.
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
In the ttyname and ttyname_r routines on Linux, at several points it needs to
check if a given TTY is the TTY we are looking for. It used to be that this
check was (to see if `maybe` is `mytty`):
__xstat64(_STAT_VER, maybe_filename, &maybe) == 0
#ifdef _STATBUF_ST_RDEV
&& S_ISCHR(maybe.st_mode) && maybe.st_rdev == mytty.st_rdev
#else
&& maybe.st_ino == mytty.st_ino && maybe.st_dev == mytty.st_dev
#endif
This check appears in several places.
Then, one of the changes made in commit 15e9a4f378
was to change that check to:
__xstat64(_STAT_VER, maybe_filename, &maybe) == 0
#ifdef _STATBUF_ST_RDEV
&& S_ISCHR(maybe.st_mode) && maybe.st_rdev == mytty.st_rdev
#endif
&& maybe.st_ino == mytty.st_ino && maybe.st_dev == mytty.st_dev
That is, it made the st_ino and st_dev parts of the check happen even if we have
the st_rdev member. This is an important change, because the kernel allows
multiple devpts filesystem instances to be created; a device file in one devpts
instance may share the same st_rdev with a file in another devpts instance, but
they aren't the same file.
This check appears twice in each file (ttyname.c and ttyname_r.c), once (in
ttyname and __ttyname_r) to check if a candidate file found by inspecting /proc
is the desired TTY, and once (in getttyname and getttyname_r) to check if a
candidate file found by searching /dev is the desired TTY. However, 15e9a4f
only updated the checks for files found via /proc; but the concern about
collisions between devpts instances is just as valid for files found via /dev.
So, update all 4 occurrences the check to be consistent with the version of the
check introduced in 15e9a4f. Make it easy to keep all 4 occurrences of the
check consistent by pulling it in to a static inline function, is_mytty.
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
is_pty returning a bool is fine since there's no possible outcome other than
true or false, and bool is used throughout the codebase.
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Linux 4.10 moved many of the documentation files around.
4.10 came out between the time the patch adding the comment (commit
15e9a4f378) was submitted and the time
it was applied (in February, January, and March 2017; respectively).
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
This patch adds the new MSG_ZEROCOPY constant from Linux 4.14 to the
Linux bits/socket.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/socket.h (MSG_ZEROCOPY): New enum
constant and macro.
This patch adds the new MADV_WIPEONFORK and MADV_KEEPONFORK from Linux
4.14 to bits/mman-linux.h (and bits/mman.h in the hppa case). Note
there are further hppa MADV_* changes in 4.14; I plan a separate glibc
patch for those.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/mman-linux.h
[__USE_MISC] (MADV_WIPEONFORK): New macro.
[__USE_MISC] (MADV_KEEPONFORK): Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/mman.h
[__USE_MISC] (MADV_WIPEONFORK): Likewise.
[__USE_MISC] (MADV_KEEPONFORK): Likewise.
This patch simplify sigpause by remobing the single thread optimization
since it will be handled already by the __sigsuspend call.
Checked on x86_64-linux-gnu.
* sysdeps/posix/sigpause.c (do_sigpause): Remove.
(__sigpause): Rely on __sigsuspend to implement single thread
optimization. Add LIBC_CANCEL_HANDLED for cancellation marking.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Zack Weinberg <zackw@panix.com>
The epoll_wait wrapper uses the raw syscall if __NR_epoll_wait is defined,
and falls back to calling epoll_pwait(..., NULL) if it isn't defined.
However, it didn't include the appropriate headers for __NR_epoll_wait to
be defined, so it was *always* falling back to calling epoll_pwait!
This mistake was introduced in b62c381591,
when epoll_wait changed from being in syscalls.list to always having a C
wrapper.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
To support Intel Control-flow Enforcement Technology (CET) run-time
control:
1. An architecture specific field in the writable ld.so namespace is
needed to indicate if CET features are enabled at run-time.
2. An architecture specific field in struct link_map is needed if
CET features are enabled in an ELF module.
This patch adds dl-procruntime.c to the writable ld.so namespace and
link_map.h to struct link_map.
Tested with build-many-glibcs.py.
* elf/dl-support.c: Include <dl-procruntime.c>.
* include/link.h: Include <link_map.h>.
* sysdeps/generic/dl-procruntime.c: New file.
* sysdeps/generic/link_map.h: Likewise.
* sysdeps/generic/ldsodefs.h: Include <dl-procruntime.c> in
the writable ld.so namespace.
Verify that sizes, alignments and field offsets of jmp_buf as well as
sigjmp_buf are unchanged regardless how struct __jmp_buf_tag is defined.
Since jmp_buf is target specific, jmp_buf-macros.h is added for each
Linux target. A new target must provides its own jmp_buf-macros.h.
TODO: Hurd needs to provide a jmp_buf-macros.h.
Tested with build-many-glibcs.py.
* include/setjmp.h [!_ISOMAC]: Include <stddef.h> and
<jmp_buf-macros.h>.
[!_ISOMAC] (STR_HELPER): New.
[!_ISOMAC] (STR): Likewise.
[!_ISOMAC] (TEST_SIZE): Likewise.
[!_ISOMAC] (TEST_ALIGN): Likewise.
[!_ISOMAC] (TEST_OFFSET): Likewise.
[!_ISOMAC] Add _Static_assert to check sizes, alignments and
field offsets of jmp_buf as well as sigjmp_buf.
* sysdeps/unix/sysv/linux/aarch64/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/arm/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/i386/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/microblaze/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/jmp_buf-macros.h:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/jmp_buf-macros.h:
Likewise.
* sysdeps/unix/sysv/linux/nios2/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/jmp_buf-macros.h:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/jmp_buf-macros.h:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/sh/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/jmp_buf-macros.h:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/jmp_buf-macros.h:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/jmp_buf-macros.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/jmp_buf-macros.h: Likewise.
This patch adds two new internal defines to set the internal
pthread_mutex_t layout required by the supported ABIS:
1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define
__nusers fields before or after __kind. The preferred value for
is 0 for new ports and it sets __nusers before __kind.
2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and
__list members will be place inside an union for linuxthreads
compatibility. The preferred value is 0 for ports and it sets
to not use an union to define both fields.
It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32.
Checked with a make check run-built-tests=no on all afected ABIs.
[BZ #22298]
* nptl/allocatestack.c (allocate_stack): Check if
__PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if
__PTHREAD_MUTEX_HAVE_PREV is defined.
* nptl/descr.h (pthread): Likewise.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal):
Likewise.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise.
* sysdeps/nptl/bits/thread-shared-types.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
(__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead
of __WORDSIZE for internal layout.
(__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead
of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION
instead of __WORDSIZE whether to use an union for __spins and __list
fields.
(__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION
case.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds a new build test to check for internal fields
offsets for user visible internal field. Although currently
the only field which is statically initialized to a non zero value
is pthread_mutex_t.__data.__kind value, the tests also check the
offset of __kind, __spins, __elision (if supported), and __list
internal member. A internal header (pthread-offset.h) is added
to each major ABI with the reference value.
Checked on x86_64-linux-gnu and with a build check for all affected
ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu,
mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu,
s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu,
sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32,
tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32).
* nptl/pthreadP.h (ASSERT_PTHREAD_STRING,
ASSERT_PTHREAD_INTERNAL_OFFSET): New macro.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time
checks for internal pthread_mutex_t offsets.
* sysdeps/aarch64/nptl/pthread-offsets.h
(__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET,
__PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET,
__PTHREAD_MUTEX_LIST_OFFSET): New macro.
* sysdeps/alpha/nptl/pthread-offsets.h: Likewise.
* sysdeps/arm/nptl/pthread-offsets.h: Likewise.
* sysdeps/hppa/nptl/pthread-offsets.h: Likewise.
* sysdeps/i386/nptl/pthread-offsets.h: Likewise.
* sysdeps/ia64/nptl/pthread-offsets.h: Likewise.
* sysdeps/m68k/nptl/pthread-offsets.h: Likewise.
* sysdeps/microblaze/nptl/pthread-offsets.h: Likewise.
* sysdeps/mips/nptl/pthread-offsets.h: Likewise.
* sysdeps/nios2/nptl/pthread-offsets.h: Likewise.
* sysdeps/powerpc/nptl/pthread-offsets.h: Likewise.
* sysdeps/s390/nptl/pthread-offsets.h: Likewise.
* sysdeps/sh/nptl/pthread-offsets.h: Likewise.
* sysdeps/sparc/nptl/pthread-offsets.h: Likewise.
* sysdeps/tile/nptl/pthread-offsets.h: Likewise.
* sysdeps/x86_64/nptl/pthread-offsets.h: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Update strcasestr-power8 to use power8 version of strnlen for
calculating length.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This patch simplify Linux sigqueue implementation by assuming
__NR_rt_sigqueueinfo existence due minimum kernel requirement
(it pre-dates Linux git inclusion for Linux 2.6.12).
Checked on x86_64-linux-gnu.
* sysdeps/unix/sysv/linux/sigqueue.c (__sigqueue): Asssume
__NR_rt_sigqueueinfo.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Zack Weinberg <zackw@panix.com>
This patch simplifies sig{timed}wait{info} by:
- Assuming __NR_rt_sigtimedwait existence on all architectures due minimum
kernel version requirement (it pre-dates Linux git inclusion for Linux
2.6.12).
- Call __sigtimedwait on both sigwait and sigwaitinfo.
- Now that sigwait is based on an internal sigtimedwait call and it is
present of both libc.so and libpthread.so we need to add an external
private definition of __sigtimedwait for libpthread.so call.
Checked on x86_64-linux-gnu.
* sysdeps/unix/sysv/linux/Versions (libc) [GLIBC_PRIVATE]: Add
__sigtimedwait.
* sysdeps/unix/sysv/linux/sigtimedwait.c: Simplify includes and
assume __NR_rt_sigtimedwait.
* sysdeps/unix/sysv/linux/sigwait.c (__sigwait): Call __sigtimedwait
and add LIBC_CANCEL_HANDLED for cancellation marking.
* sysdeps/unix/sysv/linux/sigwaitinfo.c (__sigwaitinfo): Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Zack Weinberg <zackw@panix.com>
This patch refactor ARM memchr ifunc selector to a C implementation.
No functional change is expected, including ifunc resolution rules.
It also reorganize the ifunc options code:
1. The memchr_impl.S is renamed to memchr_neon.S and multiple
compilation options (which route to armv6t2/memchr one) is
removed. The code to build if __ARM_NEON__ is defined is
also simplified.
2. A memchr_noneon is added (which as build along previous ifunc
resolution) and includes the armv6t2 direct.
3. Same as 2. for loader object.
Alongside the aforementioned changes, it also some cleanus:
- Internal memchr definition (__GI_memcpy) is now a hidden
symbol.
- No need to create hidden definition for the ifunc variants.
Checked on armv7-linux-gnueabihf and with a build for arm-linux-gnueabi,
arm-linux-gnueabihf with and without multiarch support and with both
GCC 7.1 and GCC mainline.
* sysdeps/arm/armv7/multiarch/Makefile [$(subdir) = string]
(sysdeps_routines): Add memchr_noneon.
* sysdeps/arm/armv7/multiarch/ifunc-memchr.h: New file.
* sysdeps/arm/armv7/multiarch/memchr_noneon.S: Likewise.
* sysdeps/arm/armv7/multiarch/rtld-memchr.S: Likewise.
* sysdeps/arm/armv7/multiarch/memchr.S: Remove file.
* sysdeps/arm/armv7/multiarch/memchr.c: New file.
* sysdeps/arm/armv7/multiarch/memchr_impl.S: Move to ...
* sysdeps/arm/armv7/multiarch/memchr_neon.S: ... here.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactor ARM memcpy ifunc selector to a C implementation.
No functional change is expected, including ifunc resolution rules.
It also adds some cleanup:
- Internal memcpy hidden definition (__GI_memcpy) is now a hidden
symbol.
- No need to create hidden definition for the ifunc variants.
Checked on armv7-linux-gnueabihf and with a build for arm-linux-gnueabi,
arm-linux-gnueabihf with and without multiarch support and with both
GCC 7.1 and GCC mainline. I also checked with the some possible
multiarch different configurations that trigger different memcpy
buids (__ARM_NEON__ && !__SOFT_FP__, !__ARM_NEON__ && !__SOFT_FP__, and
!__ARM_NEON__ && __SOFT_FP__).
* sysdeps/arm/arm-ifunc.h: New file.
* sysdeps/arm/armv7/multiarch/ifunc-memcpy.h: Likewise.
* sysdeps/arm/armv7/multiarch/memcpy.c: Likewise.
* sysdeps/arm/armv7/multiarch/memcpy_arm.S: Likewise.
* sysdeps/arm/armv7/multiarch/rtld-memcpy.S: Likewise.
* sysdeps/arm/armv7/multiarch/memcpy_neon.S [!__ARM_NEON__]
(__memcpy_neon): Avoid create hidden alias.
* sysdeps/arm/armv7/multiarch/memcpy_vfp.S [!__ARM_NEON_]
(__memcpy_vfp): Likewise.
* sysdeps/arm/armv7/multiarch/Makefile [$(subdir) = string]
(sysdep_routines): Add memcpy_arm.
* sysdeps/arm/armv7/multiarch/memcpy.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The powerpc bits/floatn.h declares _Float128 support to be present
when the compiler supports it for powerpc64le. However, in the case
where -mlong-double-64 is used, __MATH_TG does not actually support
_Float128; it only supports _Float128 in the distinct-long-double
case.
This shows up as a build failure when building glibc mainline with GCC
mainline, given the recently added sanity check in math.h for
configurations supported by __MATH_TG, as the compat code for
-mlong-double-64 fails to build. However, the bug was logically
present before that change (including in 2.26), just less visible.
This patch fixes the build failure by declaring _Float128 to be
unsupported in that case. (Of course this can't actually stop users
calling the type-generic macros with _Float128 arguments with
-mlong-double-64, just as they could be called with other unsupported
types on other platforms, but perhaps makes it less likely by making
all the type-specific _Float128 interfaces invisible in that case.)
Tested compilation for powerpc64le with build-many-glibcs.py.
[BZ #22402]
* sysdeps/powerpc/bits/floatn.h: Include <bits/long-double.h>.
[__NO_LONG_DOUBLE_MATH] (__HAVE_FLOAT128): Define to 0.
Using the cache hierarchy linesize minimum in CTR_EL0.
See the comment within the code for rationale.
* sysdeps/unix/sysv/linux/aarch64/sysconf.c: New file.
Remove some load/store instructions from the dynamic tlsdesc resolver
fast path. This gives around 20% faster tls access in dlopened shared
libraries (assuming glibc ran out of static tls space).
* sysdeps/aarch64/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Optimize.
Lazy tlsdesc initialization is no longer used in the dynamic linker
so all related code can be removed.
* sysdeps/arm/dl-machine.h (elf_machine_runtime_setup): Remove
DT_TLSDESC_GOT initialization.
* sysdeps/arm/dl-tlsdesc.S (_dl_tlsdesc_lazy_resolver): Remove.
(_dl_tlsdesc_resolve_hold): Likewise.
* sysdeps/aarch64/dl-tlsdesc.h (_dl_tlsdesc_lazy_resolver): Remove.
(_dl_tlsdesc_resolve_hold): Likewise.
* sysdeps/aarch64/tlsdesc.c (_dl_tlsdesc_lazy_resolver_fixup): Remove.
(_dl_tlsdesc_resolve_hold_fixup): Likewise.
Follow up to
https://sourceware.org/ml/libc-alpha/2015-11/msg00272.html
Always do tls descriptor initialization at load time during relocation
processing (as if DF_BIND_NOW were set for the binary) to avoid barriers
at every tls access. This patch mimics bind-now semantics in the lazy
relocation code of the arm target (elf_machine_lazy_rel).
Ideally the static linker should be updated too to not emit tlsdesc
relocs in DT_REL*, so elf_machine_lazy_rel is not called on them at all.
[BZ #18572]
* sysdeps/arm/dl-machine.h (elf_machine_lazy_rel): Do symbol binding
non-lazily for R_ARM_TLS_DESC.
This patch reverts
commit 9c82da17b5
Author: Maciej W. Rozycki <macro@codesourcery.com>
Date: 2014-07-17 19:22:05 +0100
[BZ #17078] ARM: R_ARM_TLS_DESC prelinker support
This only implemented support for the lazy binding case (and thus
closed the bugzilla ticket prematurely), however tlsdesc on arm is
not correct with lazy binding because there is a data race between
the lazy initialization code and tlsdesc resolver functions.
Lazy initialization of tlsdesc entries will be removed from arm to
fix the data races and thus this half-finished prelinker support
is no longer useful.
[BZ #17078]
* sysdeps/arm/dl-machine.h (elf_machine_rela): Remove the
R_ARM_TLS_DESC case.
(elf_machine_lazy_rel): Remove the prelink check.
Always do TLS descriptor initialization at load time during relocation
processing to avoid barriers at every TLS access. In non-dlopened shared
libraries the overhead of tls access vs static global access is > 3x
bigger when lazy initialization is used (_dl_tlsdesc_return_lazy)
compared to bind-now (_dl_tlsdesc_return) so the barriers dominate tls
access performance.
TLSDESC relocs are in DT_JMPREL which are processed at load time using
elf_machine_lazy_rel which is only supposed to do lightweight
initialization using the DT_TLSDESC_PLT trampoline (the trampoline code
jumps to the entry point in DT_TLSDESC_GOT which does the lazy tlsdesc
initialization at runtime). This patch changes elf_machine_lazy_rel
in aarch64 to do the symbol binding and initialization as if DF_BIND_NOW
was set, so the non-lazy code path of elf/do-rel.h was replicated.
The static linker could be changed to emit TLSDESC relocs in DT_REL*,
which are processed non-lazily, but the goal of this patch is to always
guarantee bind-now semantics, even if the binary was produced with an
old linker, so the barriers can be dropped in tls descriptor functions.
After this change the synchronizing ldar instructions can be dropped
as well as the lazy initialization machinery including the DT_TLSDESC_GOT
setup.
I believe this should be done on all targets, including ones where no
barrier is needed for lazy initialization. There is very little gain in
optimizing for large number of symbolic tlsdesc relocations which is an
extremely uncommon case. And currently the tlsdesc entries are only
readonly protected with -z now and some hardennings against writable
JUMPSLOT relocs don't work for TLSDESC so they are a security hazard.
(But to fix that the static linker has to be changed.)
* sysdeps/aarch64/dl-machine.h (elf_machine_lazy_rel): Do symbol
binding and initialization non-lazily for R_AARCH64_TLSDESC.
Add a new header file, sysdeps/x86/sysdep.h, for common assembly code
macros between i386 and x86-64. Tested on i686 and x86-64. There are
no differences in outputs of "readelf -a" and "objdump -dw" on all glibc
shared objects before and after the patch.
* sysdeps/i386/sysdep.h: Include <sysdeps/x86/sysdep.h> instead
of <sysdeps/generic/sysdep.h>.
(ALIGNARG): Removed.
(ASM_SIZE_DIRECTIVE): Likewise.
(ENTRY): Likewise.
(END): Likewise.
(ENTRY_CHK): Likewise.
(END_CHK): Likewise.
(syscall_error): Likewise.
(mcount): Likewise.
(PSEUDO_END): Likewise.
(L): Likewise.
(atom_text_section): Likewise.
* sysdeps/x86/sysdep.h: New file.
* sysdeps/x86_64/sysdep.h: Include <sysdeps/x86/sysdep.h> instead
of <sysdeps/generic/sysdep.h>.
(ALIGNARG): Removed.
(ASM_SIZE_DIRECTIVE): Likewise.
(ENTRY): Likewise.
(END): Likewise.
(ENTRY_CHK): Likewise.
(END_CHK): Likewise.
(syscall_error): Likewise.
(mcount): Likewise.
(PSEUDO_END): Likewise.
(L): Likewise.
(atom_text_section): Likewise.
sigprocmask.c, sigtimedwait.c, sigwait.c and sigwaitinfo.c files from
sysdeps/unix/sysv/linux include nptl-signals.h via nptl/pthreadP.h,
and so SIGCANCEL and SIGSETXID become defined unconditionally. But
later in the code, there are some checks weither symbols defined,
which is useless. This patch removes useless checks.
Checked on x86_64-linux-gnu.
* sysdeps/unix/sysv/linux/sigprocmask.c: Remove useless #ifdefs.
* sysdeps/unix/sysv/linux/sigtimedwait.c: Likewise.
* sysdeps/unix/sysv/linux/sigwait.c: Likewise.
* sysdeps/unix/sysv/linux/sigwaitinfo.c: Likewise.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Reviewed-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
ia64, s390-64, sparc64 and x86_64 host their own implementation of
sigpending() in corresponding files, but they are identical to generic
linux file despite few comments. This patch removes that files, so the
implementation of sigpending() is taken from sysdeps/unix/sysv/linux
for all ports.
Build-tested on x86_64.
* sysdeps/unix/sysv/linux/ia64/sigpending.c: Remove file.
* sysdeps/unix/sysv/linux/s390/s390-64/sigpending.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/sigpending.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigpending.c: Likewise.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is another one where we'll be wanting the base symbols for
powerpc64le rather than just a power7 variant.
* sysdeps/powerpc/powerpc64/multiarch/strncase_l-power7.c: Include
string/strncase_l.c, not string/strncase.c.
(USE_IN_EXTENDED_LOCALE_MODEL): Don't define.
(libc_hidden_def): Redefine.
The routine being assembled here is strcasecmp_l, so ask for that via
__STRCMP and STRCMP defines. That change means tweaking the power7
override. Needed for later powerpc64le changes where we want the base
symbols, not just a power7 variant.
* sysdeps/powerpc/powerpc64/multiarch/strcasecmp_l-power7.S:
(__STRCMP, STRCMP, __strcasecmp_l): Define.
(__strcasecmp): Don't define.
These functions aren't used in ld.so at the moment since we don't have
strcmp or strncmp ifuncs for them there. Remove the ld.so bloat.
* sysdeps/powerpc/powerpc64/multiarch/strcmp-power8.S: Wrap in
IS_IN (libc).
* sysdeps/powerpc/powerpc64/multiarch/strcmp-power9.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp-power9.S: Likewise.
USE_AS_STPNCPY is defined by sysdeps/powerpc/powerpc64/power8/stpncpy.S,
included by this file.
* sysdeps/powerpc/powerpc64/multiarch/stpncpy-power8.S: Don't define
USE_AS_STPNCPY.
It seems to me that libc.a should not contain any of the __GI_
symbols, and certainly --enable-multi-arch ought to not add to the
list. At the end of this patch series we have the following in both
--enable-multi-arch and --disable-multi-arch libc.a:
0000000000000000 T __GI___readdir64
0000000000000000 T __GI___fxstatat64
0000000000000000 T __GI_getrlimit
0000000000000000 T __GI___getrlimit
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-ppc64.S (hidden_def):
Redefine only when SHARED.
i586 strcpy.S used a clever trick with LEA to implement jump table:
/* ECX has the last 2 bits of the address of source - 1. */
andl $3, %ecx
call 2f
2: popl %edx
/* 0xb is the distance between 2: and 1:. */
leal 0xb(%edx,%ecx,8), %ecx
jmp *%ecx
.align 8
1: /* ECX == 0 */
orb (%esi), %al
jz L(end)
stosb
xorl %eax, %eax
incl %esi
/* ECX == 1 */
orb (%esi), %al
jz L(end)
stosb
xorl %eax, %eax
incl %esi
/* ECX == 2 */
orb (%esi), %al
jz L(end)
stosb
xorl %eax, %eax
incl %esi
/* ECX == 3 */
L(1): movl (%esi), %ecx
leal 4(%esi),%esi
This fails if there are instruction length changes before L(1):. This
patch replaces it with conditional branches:
cmpb $2, %cl
je L(Src2)
ja L(Src3)
cmpb $1, %cl
je L(Src1)
L(Src0):
which have similar performance and work with any instruction lengths.
Tested on i586 and i686 with and without --disable-multi-arch.
[BZ #22353]
* sysdeps/i386/i586/strcpy.S (STRCPY): Use conditional branches.
(1): Renamed to ...
(L(Src0)): This.
(L(Src1)): New.
(L(Src2)): Likewise.
(L(1)): Renamed to ...
(L(Src3)): This.
POWER9 DD2.1 and earlier has an issue where some cache inhibited
vector load traps to the kernel, causing a performance degradation. To
handle this in memcpy and memmove, lvx/stvx is used for aligned
addresses instead of lxvd2x/stxvd2x.
Reference: https://patchwork.ozlabs.org/patch/814059/
* sysdeps/powerpc/powerpc64/power7/memcpy.S: Replace
lxvd2x/stxvd2x with lvx/stvx.
* sysdeps/powerpc/powerpc64/power7/memmove.S: Likewise.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The glibc implementation of iseqsig relies on ordered comparison
operators raising the "invalid" exception for quiet NaN operands, with
a workaround on platforms where a GCC bug means that exception is not
raised. For x86, that bug has now been fixed for GCC 8, so this patch
disables the workaround in that case. If and when the corresponding
bugs for powerpc and s390 are fixed, the headers for those platforms
should of course be updated similarly.
Tested for x86_64 and x86, including with GCC mainline. Note that
other failures appear with GCC mainline because of spurious use of
ordered comparison instructions for unordered operations
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82692>.
* sysdeps/x86/fpu/fix-fp-int-compare-invalid.h
(FIX_COMPARE_INVALID): Define to 0 if [__GNUC_PREREQ (8, 0)].
As shown in some buildbot issues on aarch64 and powerpc, calling
clone (VFORK) and waitpid (WNOHANG) does not guarantee the child
is ready to be collected. This patch changes the call back to 0
as before fe05e1cb6d fix.
This change can lead to the scenario 4.3 described in the commit,
where the waitpid call can hang undefinitely on the call. However
this is also a very unlikely and also undefinied situation where
both the caller is trying to terminate a pid before posix_spawn
returns and the race pid reuse is triggered. I don't see how to
correct handle this specific situation within posix_spawn.
Checked on x86_64-linux-gnu, aarch64-linux-gnu and
powerpc64-linux-gnu.
* sysdeps/unix/sysv/linux/spawni.c (__spawnix): Use 0 instead of
WNOHANG in waitpid call.
cfi info for stack adjust needs to be on the insn doing the adjust.
cfi describing register saves can be anywhere after the save insn but
before the reg is altered. Fewer locations with cfi result in smaller
cfi programs and possibly slightly faster exception handling. Thus
the LR cfi_offset move.
The idea behind ajusting sp after restoring regs is to break a
register dependency chain, in this case not be using r1 immediately
after it is modified.
The missing LR cfi_restore meant that code after the blr,
unaligned_lt_16 and other labels, would have cfi that said LR was at
cfa+16, but that code is reached without LR being saved.
* sysdeps/powerpc/powerpc64/power8/strncpy.S: Move LR cfi.
Adjust stack after restoring regs. Add missing LR cfi_restore.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This patch moves the frame setup and teardown to immediately around
the single memset call, as has been done for power8. I've also
decreased FRAMESIZE to that needed to save the two callee-saved
registers used. Plus added cfi.
* sysdeps/powerpc/powerpc64/power7/strncpy.S: Decrease FRAMESIZE.
Move LR save and frame setup/teardown and LR restore to
immediately around memset call. Provide cfi.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This patch replaces i386 assembly versions of e_exp2f with generic
e_exp2f.c. For workload-spec2017.wrf, on Nehalem, it improves
performance by:
Before After Improvement
reciprocal-throughput 112.996 40.0454 182%
latency 126.581 54.4479 132%
On Skylake, it improves performance by:
Before After Improvement
reciprocal-throughput 113.14 39.447 186%
latency 136.068 55.684 144%
On IvyBridge with --disable-multi-arch, it improves performance by:
Before After Improvement
reciprocal-throughput 132.521 40.3759 228%
latency 145.791 58.4587 149%
* sysdeps/i386/fpu/e_exp2f.S: Removed.
* sysdeps/i386/fpu/w_exp2f.c: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Updated for generic e_exp2f.c.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/Makefile (libm-sysdep_routines):
Add e_exp2f-sse2.
(CFLAGS-e_exp2f-sse2.c): New.
* sysdeps/i386/i686/fpu/multiarch/e_exp2f-sse2.c: New file.
* sysdeps/i386/i686/fpu/multiarch/e_exp2f.c: Likewise.
The bits/floatn.h header currently only has defines relating to
_Float128. This patch adds defines relating to other _FloatN /
_FloatNx types.
The approach taken is to add defines for all _FloatN / _FloatNx types
known to GCC, and to put them in a common bits/floatn-common.h header
included at the end of all the individual bits/floatn.h headers. If
in future some defines become different for different glibc
configurations, they will move out into the separate bits/floatn.h
headers.
Some defines are expected always to be the same across glibc ports.
Corresponding defines are nevertheless put in this header. The intent
is that where there are conditionals (in headers or in non-installed
files) that can just repeat the same or nearly the same logic for each
floating-point type, they should do so, even if in fact the cases for
some types could be unconditionally present or absent because the same
conditionals are true or false for all glibc configurations. This
should make the glibc code with such conditionals easier to read,
because the reader can just see that the same conditionals are
repeated for each type, rather than seeing different conditionals for
different types and needing to reason, at each location with such
differences, why those differences are indeed correct there. (Cases
involving per-format rather than per-type logic are more likely still
to need differences in how they handle different types.)
Having such defines and conditionals also helps in incremental
preparation for adding _Float32 / _Float64 / _Float32x / _Float64x
function aliases. I intend subsequent patches to add such
conditionals corresponding to those already present for _Float128, as
well as making more architecture-specific function implementations use
common macros to define aliases in preparation for adding such _FloatN
/ _FloatNx aliases.
Tested for x86_64.
* bits/floatn-common.h: New file.
* math/Makefile (headers): Add bits/floatn-common.h.
* bits/floatn.h: Include <bits/floatn-common.h>.
* sysdeps/ia64/bits/floatn.h: Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
* sysdeps/mips/ieee754/bits/floatn.h: Likewise.
* sysdeps/powerpc/bits/floatn.h: Likewise.
* sysdeps/x86/bits/floatn.h: Likewise.
As noted by Florian Weimer, current Linux posix_spawn implementation
can trigger an assert if the auxiliary process is terminated before
actually setting the err member:
340 /* Child must set args.err to something non-negative - we rely on
341 the parent and child sharing VM. */
342 args.err = -1;
[...]
362 new_pid = CLONE (__spawni_child, STACK (stack, stack_size), stack_size,
363 CLONE_VM | CLONE_VFORK | SIGCHLD, &args);
364
365 if (new_pid > 0)
366 {
367 ec = args.err;
368 assert (ec >= 0);
Another possible issue is killing the child between setting the err and
actually calling execve. In this case the process will not ran, but
posix_spawn also will not report any error:
269
270 args->err = 0;
271 args->exec (args->file, args->argv, args->envp);
As suggested by Andreas Schwab, this patch removes the faulty assert
and also handles any signal that happens before fork and execve as the
spawn was successful (and thus relaying the handling to the caller to
figure this out). Different than Florian, I can not see why using
atomics to set err would help here, essentially the code runs
sequentially (due CLONE_VFORK) and I think it would not be legal the
compiler evaluate ec without checking for new_pid result (thus there
is no need to compiler barrier).
Summarizing the possible scenarios on posix_spawn execution, we
have:
1. For default case with a success execution, args.err will be 0, pid
will not be collected and it will be reported to caller.
2. For default failure case, args.err will be positive and the it will
be collected by the waitpid. An error will be reported to the
caller.
3. For the unlikely case where the process was terminated and not
collected by a caller signal handler, it will be reported as succeful
execution and not be collected by posix_spawn (since args.err will
be 0). The caller will need to actually handle this case.
4. For the unlikely case where the process was terminated and collected
by caller we have 3 other possible scenarios:
4.1. The auxiliary process was terminated with args.err equal to 0:
it will handled as 1. (so it does not matter if we hit the pid
reuse race since we won't possible collect an unexpected
process).
4.2. The auxiliary process was terminated after execve (due a failure
in calling it) and before setting args.err to -1: it will also
be handle as 1. but with the issue of not be able to report the
caller a possible execve failures.
4.3. The auxiliary process was terminated after args.err is set to -1:
this is the case where it will be possible to hit the pid reuse
case where we will need to collected the auxiliary pid but we
can not be sure if it will be expected one. I think for this
case we need to actually change waitpid to use WNOHANG to avoid
hanging indefinitely on the call and report an error to caller
since we can't differentiate between a default failure as 2.
and a possible pid reuse race issue.
Checked on x86_64-linux-gnu.
* sysdeps/unix/sysv/linux/spawni.c (__spawnix): Handle the case where
the auxiliary process is terminated by a signal before calling _exit
or execve.
In _dl_runtime_resolve, use fxsave/xsave/xsavec to preserve all vector,
mask and bound registers. It simplifies _dl_runtime_resolve and supports
different calling conventions. ld.so code size is reduced by more than
1 KB. However, use fxsave/xsave/xsavec takes a little bit more cycles
than saving and restoring vector and bound registers individually.
Latency for _dl_runtime_resolve to lookup the function, foo, from one
shared library plus libc.so:
Before After Change
Westmere (SSE)/fxsave 345 866 151%
IvyBridge (AVX)/xsave 420 643 53%
Haswell (AVX)/xsave 713 1252 75%
Skylake (AVX+MPX)/xsavec 559 719 28%
Skylake (AVX512+MPX)/xsavec 145 272 87%
Ryzen (AVX)/xsavec 280 553 97%
This is the worst case where portion of time spent for saving and
restoring registers is bigger than majority of cases. With smaller
_dl_runtime_resolve code size, overall performance impact is negligible.
On IvyBridge, differences in build and test time of binutils with lazy
binding GCC and binutils are noises. On Westmere, differences in
bootstrap and "makc check" time of GCC 7 with lazy binding GCC and
binutils are also noises.
[BZ #21265]
* sysdeps/x86/cpu-features-offsets.sym (XSAVE_STATE_SIZE_OFFSET):
New.
* sysdeps/x86/cpu-features.c: Include <libc-pointer-arith.h>.
(get_common_indeces): Set xsave_state_size, xsave_state_full_size
and bit_arch_XSAVEC_Usable if needed.
(init_cpu_features): Remove bit_arch_Use_dl_runtime_resolve_slow
and bit_arch_Use_dl_runtime_resolve_opt.
* sysdeps/x86/cpu-features.h (bit_arch_Use_dl_runtime_resolve_opt):
Removed.
(bit_arch_Use_dl_runtime_resolve_slow): Likewise.
(bit_arch_Prefer_No_AVX512): Updated.
(bit_arch_MathVec_Prefer_No_AVX512): Likewise.
(bit_arch_XSAVEC_Usable): New.
(STATE_SAVE_OFFSET): Likewise.
(STATE_SAVE_MASK): Likewise.
[__ASSEMBLER__]: Include <cpu-features-offsets.h>.
(cpu_features): Add xsave_state_size and xsave_state_full_size.
(index_arch_Use_dl_runtime_resolve_opt): Removed.
(index_arch_Use_dl_runtime_resolve_slow): Likewise.
(index_arch_XSAVEC_Usable): New.
* sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)):
Support XSAVEC_Usable. Remove Use_dl_runtime_resolve_slow.
* sysdeps/x86_64/Makefile (tst-x86_64-1-ENV): New if tunables
is enabled.
* sysdeps/x86_64/dl-machine.h (elf_machine_runtime_setup):
Replace _dl_runtime_resolve_sse, _dl_runtime_resolve_avx,
_dl_runtime_resolve_avx_slow, _dl_runtime_resolve_avx_opt,
_dl_runtime_resolve_avx512 and _dl_runtime_resolve_avx512_opt
with _dl_runtime_resolve_fxsave, _dl_runtime_resolve_xsave and
_dl_runtime_resolve_xsavec.
* sysdeps/x86_64/dl-trampoline.S (DL_RUNTIME_UNALIGNED_VEC_SIZE):
Removed.
(DL_RUNTIME_RESOLVE_REALIGN_STACK): Check STATE_SAVE_ALIGNMENT
instead of VEC_SIZE.
(REGISTER_SAVE_BND0): Removed.
(REGISTER_SAVE_BND1): Likewise.
(REGISTER_SAVE_BND3): Likewise.
(REGISTER_SAVE_RAX): Always defined to 0.
(VMOV): Removed.
(_dl_runtime_resolve_avx): Likewise.
(_dl_runtime_resolve_avx_slow): Likewise.
(_dl_runtime_resolve_avx_opt): Likewise.
(_dl_runtime_resolve_avx512): Likewise.
(_dl_runtime_resolve_avx512_opt): Likewise.
(_dl_runtime_resolve_sse): Likewise.
(_dl_runtime_resolve_sse_vex): Likewise.
(USE_FXSAVE): New.
(_dl_runtime_resolve_fxsave): Likewise.
(USE_XSAVE): Likewise.
(_dl_runtime_resolve_xsave): Likewise.
(USE_XSAVEC): Likewise.
(_dl_runtime_resolve_xsavec): Likewise.
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve_avx512):
Removed.
(_dl_runtime_resolve_avx512_opt): Likewise.
(_dl_runtime_resolve_avx): Likewise.
(_dl_runtime_resolve_avx_opt): Likewise.
(_dl_runtime_resolve_sse): Likewise.
(_dl_runtime_resolve_sse_vex): Likewise.
(_dl_runtime_resolve_fxsave): New.
(_dl_runtime_resolve_xsave): Likewise.
(_dl_runtime_resolve_xsavec): Likewise.
When --enable-static-pie is used to configure glibc, we need to use
_dl_relocate_static_pie to compute load address in static PIE.
* sysdeps/m68k/dl-machine.h (elf_machine_load_address): Use
_dl_relocate_static_pie instead of _dl_start to compute load
address in static PIE.
After commit 37f802f864 (Remove
__need_IOV_MAX and __need_FOPEN_MAX), UIO_MAXIOV is no longer supplied
(indirectly) through <bits/stdio_lim.h>, so sysdeps/posix/sysconf.c no
longer sees the definition.
This patch adds a MIPS-specific bits/floatn.h header. This header is
identical to the ldbl-128 version except for the comment at the top;
the purpose is to ensure that a 32-bit MIPS build installs a header
that is the same as in a 64-bit MIPS build and so properly shows
_Float128 support to be available for 64-bit compilations, on the
general principle of an installation for one multilib providing
headers also suitable for other multilibs.
Tested with build-many-glibcs.py.
* sysdeps/mips/ieee754/bits/floatn.h: New file.
Similar to bug 21987 for SPARC, MIPS64 wrongly installs the ldbl-128
version of bits/long-double.h, meaning incorrect results when using
headers installed from a 64-bit installation for a 32-bit build. (I
haven't actually seen this cause build failures before its interaction
with bits/floatn.h did so - installed headers wrongly expecting
_Float128 to be available in a 32-bit configuration.)
This patch fixes the bug by moving the MIPS header to
sysdeps/mips/ieee754, which comes before sysdeps/ieee754/ldbl-128 in
the sysdeps directory ordering. (bits/floatn.h will need a similar
fix - duplicating the ldbl-128 version for MIPS will suffice - for
headers from a 32-bit installation to be correct for 64-bit builds.)
Tested with build-many-glibcs.py (compilers build for
mips64-linux-gnu, where there was previously a libstdc++ build failure
as at
<https://sourceware.org/ml/libc-testresults/2017-q4/msg00130.html>).
[BZ #22322]
* sysdeps/mips/bits/long-double.h: Move to ....
* sysdeps/mips/ieee754/bits/long-double.h: ... here.
This patch adds support for *f128 function aliases on platforms where
long double has the binary128 format (and thus GCC 7 provides the
_Float128 type with the same ABI as long double but as a distinct type
in terms of C type compatibility). This is the same API as provided
in glibc 2.26 for powerpc64le / x86_64 / x86 / ia64 where _Float128
has a different format from long double, with the bulk of the API
coming from TS 18661-3. All the functions alias the corresponding
long double functions, and __* function names are not provided since
those are only needed once for each floating-point format, not more
than once for different types with the same format (so for example,
-ffinite-math-only maps foof128 to __fool_finite, while type-generic
macros end up calling e.g. __issignalingl for _Float128 arguments on
such platforms).
The preparation for this feature was done in previous patches, so this
one just needs to add the relevant makefile and header definitions,
and update macro definitions of libm_alias_ldouble_other_r, to turn on
the feature, and update documentation and ABI baselines.
Tested (a) for x86_64, (b) for aarch64, (c) with build-many-glibcs.py
with both GCC 6 and GCC 7.
* sysdeps/ieee754/ldbl-128/Makeconfig: New file.
* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
* sysdeps/ieee754/ldbl-128/float128-abi.h: Likewise.
* sysdeps/generic/libm-alias-ldouble.h: Include <bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Include
<bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* manual/math.texi (Mathematics): Document additional architecture
support for _Float128.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
This patch rewrites aarch64 elf_machine_load_address to use special _DYNAMIC
symbol instead of _dl_start.
The static address of _DYNAMIC symbol is stored in the first GOT entry.
Here is the change which makes this solution work (part of binutils 2.24):
https://sourceware.org/ml/binutils/2013-06/msg00248.html
i386, x86_64 targets use the same method to do this as well.
The original implementation relies on a trick that R_AARCH64_ABS32 relocation
being resolved at link time and the static address fits in the 32bits.
However, in LP64, normally, the address is defined to be 64 bit.
Here is the C version one which should be portable in all cases.
* sysdeps/aarch64/dl-machine.h (elf_machine_load_address): Use
_DYNAMIC symbol to calculate load address.
A performance regression was introduced by commit
84d74e427a "powerpc: Cleanup fenv_private.h".
In the powerpc implementation of SET_RESTORE_ROUND, there is the
following code in the "SET" function (slightly simplified):
--
old.fenv = fegetenv_register ();
new.l = (old.l & _FPU_MASK_TRAPS_RN) | r; (1)
if (new.l != old.l) (2)
{
if ((old.l & _FPU_ALL_TRAPS) != 0)
(void) __fe_mask_env ();
fesetenv_register (new.fenv); (3)
--
Line (1) sets the value of "new" to the current value of FPSCR,
but masks off summary bits, exceptions, non-IEEE mode, and
rounding mode, then ORs in the new rounding mode.
Line (2) compares this new value to the current value in order to
avoid setting a new value in the FPSCR (line (3)) unless something
significant has changed (exception enables or rounding mode).
The summary bits are not germane to the comparison, but are cleared
in "new" and preserved in "old", resulting in false negative
comparisons, and unnecessarily setting the FPSCR in those cases
with associated negative performance impacts.
The solution is to treat the summaries identically for "new" and "old":
- save them in SET
- leave them alone otherwise
- restore the saved values in RESTORE
Also minor changes:
- expand _FPU_MASK_RN to 64bit hex, to match other MASKs
- treat bit 52 (left-to-right) as reserved (since it is)
* sysdeps/powerpc/fpu/fenv_private.h (_FPU_MASK_TRAPS_RN):
(_FPU_MASK_FRAC_INEX_RET_CC): Fix masks to more properly handle
summary bits.
(_FPU_MASK_RN): Expand _FPU_MASK_RN to 64bit hex.
(_FPU_MASK_NOT_RN_NI): Treat bit 52 (left-to-right) as reserved.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This patch moves the generic definition from x86_64 init-arch
to a common header ifunc-init.h. No functional changes is expected.
Checked on a x86_64-linux-gnu build.
* sysdeps/generic/ifunc-init.h: New file.
* sysdeps/x86/init-arch.h: Use generic ifunc-init.h.
With support for _Float128 functions on platforms where that type has
the same ABI as long double, as well as on platforms where it is
ABI-distinct, those functions will need to be exported from glibc's
shared libraries at appropriate symbol versions in each case.
This patch avoids duplication of lists of symbols to export by moving
the symbols other than __* to math/Versions and stdlib/Versions.
There, they are conditional on <float128-abi.h> defining
FLOAT128_VERSION and a default version of that header is added that
does not define that macro. Enabling the float128 function aliases
will then include adding a sysdeps/ieee754/ldbl-128/float128-abi.h
that defines FLOAT128_VERSION to GLIBC_2.27. Symbols __* remain in
sysdeps/ieee754/float128/Versions; those symbols should be present
only once per floating-point format, not once per type.
Note that if any platforms currently lacking support for a type with
binary128 format get glibc support for such a type in future (whether
only as _Float128, or also as a new long double format), and new libm
functions (present for all types) have been added by then, additional
macros will be needed to allow such functions to get a version of the
form "GLIBC_2.28 if the platform had _Float128 support by then, or the
later version at which that platform had _Float128 support added".
This is not however a preexisting condition, but would have applied
equally to the existing support for _Float128 as an ABI-distinct
type. New all-type libm functions should just be added to the
appropriate symbol version (currently GLIBC_2.27) for all types, with
such special-case handling for _Float128 versions (and _Float64x as
well in future) waiting until someone actually wants to add support
for _Float128 to an existing platform after a release in which that
platform and a post-2.26 libm function had support but that platform
lacked _Float128 support.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch. Also tested in conjunction
with the remaining changes to enable float128 aliases.
* sysdeps/generic/float128-abi.h: New file.
* sysdeps/ieee754/float128/Versions (FLOAT128_VERSION): Move
non-__prefixed symbols to ....
* math/Versions: ... here. Include <float128-abi.h>.
* stdlib/Versions ... and here. Include <float128-abi.h>
This patch adds support for building strtof128, wcstof128, strtof128_l
and wcstof128_l as aliases, in the case of __HAVE_FLOAT128 &&
!__HAVE_DISTINCT_FLOAT128.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch. Also tested together with
changes to enable float128 aliases.
* stdlib/strtold.c: Include <bits/floatn.h>
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (strtof128): Define
and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (wcstof128): Define
and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-128/strtold_l.c [__HAVE_FLOAT128 &&
!__HAVE_DISTINCT_FLOAT128] (strtof128_l): Define and later
undefine as macro. Define as weak alias if [!USE_WIDE_CHAR].
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (wcstof128_l):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
* sysdeps/ieee754/ldbl-64-128/strtold_l.c: Include
<bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (strtof128_l):
Define and later undefine as macro. Define as weak alias if
[!USE_WIDE_CHAR].
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (wcstof128_l):
Define and later undefine as macro. Define as weak alias if
[USE_WIDE_CHAR].
This patch makes ldbl-64-128/s_nextafterl.c restore the default
weak_alias definition and use libm_alias_ldouble_other (having
undefined and redefined weak_alias for the include of
ldbl-128/s_nextafterl.c, so the libm_alias_ldouble use in the latter
file is ineffective).
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch. Also tested together with
changes to enable float128 aliases.
* sysdeps/ieee754/ldbl-64-128/s_nextafterl.c (weak_alias):
Undefine and restore default definition. Use
libm_alias_ldouble_other.
Normally, TLS relocations against local symbols are optimised by the linker
to be absolute. However, gold does not do this, and so it is possible to
end up with, for example, R_SPARC_TLS_DTPMOD64 referring to a local symbol.
Since sym_map is left as null in elf_machine_rela for the special local
symbol case, the relocation handling thinks it has nothing to do, and so
the module gets left as 0. Havoc then ensues when the variable in question
is accessed.
Before this fix, the main_local_gold program would receive a SIGBUS on
sparc64, and SIGSEGV on powerpc32. With this fix applied, that test now
passes like the rest of them.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela):
Assign sym_map to be map for local symbols, as TLS relocations
use sym_map to determine whether the symbol is defined and to
extract the TLS information.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Likewise.
Fix the ifdef clause that was being used in the opposite way, setting
a wrong value of the carry bit.
This is also correcting 2 memory accesses that were mistakenly referring
to r0 while they were supposed to mean the immediate value 0.
[BZ #22142]
* stdio-common/tst-printf.c (fp_test): Add tests for DBL_MAX and
-DBL_MAX.
(do_test): Likewise.
* stdio-common/tst-printf.sh: Likewise.
* sysdeps/powerpc/powerpc64/power7/add_n.S: Invert the initial
ifdef clause in order to set the carry bit right. Replace r0 by
0 without changing the behavior.
This patch makes SPARC fabsl implementation use libm_alias_ldouble, to
prepare them for also defining _Float128 function aliases.
Tested with build-many-glibcs.py that installed stripped shared
libraries (sparc64-linux-gnu and sparcv9-linux-gnu) are unchanged by
the patch.
* sysdeps/sparc/sparc32/fpu/s_fabsl.c: Include
<libm-alias-ldouble.h>.
(fabsl): Define using libm_alias_ldouble.
* sysdeps/sparc/sparc64/fpu/s_fabsl.c: Include
<libm-alias-ldouble.h>.
(fabsl): Define using libm_alias_ldouble.
Testing with changes to enable _Float128 function aliases shows that
the libm_alias_ldouble_other usage in ldbl-opt/w_lgamma_compatl.c does
not in fact work. Furthermore, it is unnecessary; the relevant
aliases get created through w_lgammal_compat2.c. This patch removes
the problem code.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch. Also tested in conjunction with
patches to enable _Float128 function aliases.
* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c [BUILD_LGAMMA]:
Remove conditional code.
Testing with changes to enable _Float128 function aliases shows that
the libm_alias_ldouble_other usage in ldbl-opt/s_clog10l.c does not in
fact work, because __clog10l is defined with long_double_symbol rather
than as a normal C alias. This patch fixes this by renaming the
__clog10l__internal alias (not strictly necessary, but avoids a hack
with "__clog10l_interna" / "__clog10l__interna" as first argument to
libm_alias_ldouble_other) and using the renamed alias when calling
libm_alias_ldouble_other.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanges by the patch. Also tested in conjunction with
patches to enable _Float128 function aliases.
* sysdeps/ieee754/ldbl-opt/s_clog10l.c (__clog10l__internal):
Rename to __clog10_internal_l.
(__clog10_internal_l): Define aliases using
libm_alias_ldouble_other instead of using libm_alias_ldouble_other
with __clog10.
Current GLIBC has two ways to implement the single thread optimization
on syscalls to avoid calling the cancellation path: either by using
global variables (__{libc,pthread}_multiple_thread) or by accessing
the TCB field (defined by TLS_MULTIPLE_THREADS_IN_TCB). Both the
variables and the macros to acces its value are defined in the
architecture sysdep-cancel.h header.
This patch consolidates its definition on only one header,
sysdeps/unix/sysv/linux/sysdep-cancel.h, and adds a new define
(SINGLE_THREAD_BY_GLOBAL) which the architecture defines if it prefer
to use the global variables instead of the TCB field. This is an
optimization, so if the architecture does not define it, the TCB
method will be used as default.
Checked on x86_64-linux-gnu and on a build with major touched
ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
hppa-linux-gnu, i686-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu,
mips-linux-gnu, mips64-linux-gnu, powerpc-linux-gnu,
powerpc64le-linux-gnu, s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu,
sparcv9-linux-gnu, sparc64-linux-gnu, tilegx-linux-gnu).
* sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h: Remove file.
* sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/arm/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/sh/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/tile/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h
(SINGLE_THREAD_BY_GLOBAL): Define.
* sysdeps/unix/sysv/linux/aarch64/sysdep.h (SINGLE_THREAD_BY_GLOBAL):
Likewise.
* sysdeps/unix/sysv/linux/alpha/sysdep.h (SINGLE_THREAD_BY_GLOBAL):
Likewise.
* sysdeps/unix/sysv/linux/arm/sysdep.h (SINGLE_THREAD_BY_GLOBAL):
Likewise.
* sysdeps/unix/sysv/linux/hppa/sysdep.h (SINGLE_THREAD_BY_GLOBAL):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/sysdep.h
(SINGLE_THREAD_BY_GLOBAL): Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h (SINGLE_THREAD_BY_GLOBAL):
Likewise.
This patch fixes ldbl-opt code to use generic libm alias macros in
preparation for getting _FloatN / _FloatNx aliases where appropriate.
Four functions are affected, that undefine and redefine alias macros
before including the implementations they wrap in such a way that
_FloatN / _FloatNx aliases would not appear. s_clog10l.c undefines
and redefined declare_mgen_alias, so just needs a
libm_alias_ldouble_other call added. w_exp10l_compat.c undefines and
redefines weak_alias, but in fact does not need to do so, since
math/w_exp10l_compat.c uses libm_alias_ldouble and does not use
weak_alias other than through that, so the undefines and redefines of
weak_alias are removed. w_lgamma_compatl.c and w_remainderl_compat.c
are made to use libm_alias_ldouble_other in conjunction with restoring
the original definition of weak_alias so this is effective.
Tested with build-many-glibcs.py. Installed stripped shared libraries
are unchanged by this patch.
* sysdeps/ieee754/ldbl-opt/s_clog10l.c: Use
libm_alias_ldouble_other.
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (weak_alias): Do not
undefine and redefine.
[LIBM_SVID_COMPAT && !LONG_DOUBLE_COMPAT (libm, GLIBC_2_1)]
(exp10l): Do not define here.
* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c [BUILD_LGAMMA]
(weak_alias): Undefine and redefine.
[BUILD_LGAMMA]: Use libm_alias_ldouble_other.
* sysdeps/ieee754/ldbl-opt/w_remainderl_compat.c
[LIBM_SVID_COMPAT] (weak_alias): Undefine and redefine here.
[LIBM_SVID_COMPAT]: Use libm_alias_ldouble_other.
Some libm functions are unable to use the generic alias macros such as
libm_alias_double because they have special symbol versioning
requirements for the main float, double or long double public names.
To facilitate adding _FloatN / _FloatNx function aliases in future,
it's still desirable to have generic macros those functions can use as
far as possible. This patch adds macros such as
libm_alias_double_other, which only define names for _FloatN /
_FloatNx aliases, not for float / double / long double. As present,
all these new macros do nothing, but they are called in the
appropriate places in macros such as libm_alias_double. This patch
also arranges for lgamma implementations, and the recently added
optimized float function implementations, to use the new macros to
make them ready for addition of _FloatN / _FloatNx aliases.
Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by this patch.
* sysdeps/generic/libm-alias-double.h (libm_alias_double_other_r):
New macro.
(libm_alias_double_other): Likewise.
(libm_alias_double_r): Use libm_alias_double_other_r.
* sysdeps/generic/libm-alias-float.h (libm_alias_float_other_r):
New macro.
(libm_alias_float_other): Likewise.
(libm_alias_float_r): Use libm_alias_float_other_r.
* sysdeps/generic/libm-alias-float128.h
(libm_alias_float128_other_r): New macro.
(libm_alias_float128_other): Likewise.
(libm_alias_float128_r): Use libm_alias_float128_other_r.
* sysdeps/generic/libm-alias-ldouble.h
(libm_alias_ldouble_other_r): New macro.
(libm_alias_ldouble_other): Likewise.
(libm_alias_ldouble_r): Use libm_alias_ldouble_other_r.
* sysdeps/ieee754/ldbl-opt/libm-alias-double.h
(libm_alias_double_other_r): New macro.
(libm_alias_double_other): Likewise.
(libm_alias_double_r): Use libm_alias_double_other_r.
* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h
(libm_alias_ldouble_other_r): New macro.
(libm_alias_ldouble_other): Likewise.
(libm_alias_ldouble_r): Use libm_alias_ldouble_other_r.
* math/w_lgamma_main.c: Include <libm-alias-double.h>.
[!USE_AS_COMPAT]: Use libm_alias_double_other.
* math/w_lgammaf_main.c: Include <libm-alias-float.h>.
[!USE_AS_COMPAT]: Use libm_alias_float_other.
* math/w_lgammal_main.c: Include <libm-alias-ldouble.h>.
[!USE_AS_COMPAT]: Use libm_alias_ldouble_other.
* math/w_exp2f.c: Use libm_alias_float_other.
* math/w_expf.c: Likewise.
* math/w_log2f.c: Likewise.
* math/w_logf.c: Likewise.
* math/w_powf.c: Likewise.
* sysdeps/ieee754/flt-32/e_exp2f.c: Include <libm-alias-float.h>.
[!__exp2f]: Use libm_alias_float_other.
* sysdeps/ieee754/flt-32/e_expf.c: Include <libm-alias-float.h>.
[!__expf]: Use libm_alias_float_other.
* sysdeps/ieee754/flt-32/e_log2f.c: Include <libm-alias-float.h>.
[!__log2f]: Use libm_alias_float_other.
* sysdeps/ieee754/flt-32/e_logf.c: Include <libm-alias-float.h>.
[!__logf]: Use libm_alias_float_other.
* sysdeps/ieee754/flt-32/e_powf.c: Include <libm-alias-float.h>.
[!__powf]: Use libm_alias_float_other.
Continuing the use of generic macros for defining libm function
aliases, in preparation for adding more _FloatN / _FloatNx function
names, this patch makes the lgamma_r functions use such macros.
declare_mgen_alias_r becomes a standard macro in math-type-macros.h
instead of being locally defined in w_lgamma_r_templace.c. This in
turn must be defined by each math-type-macros-<type>.h. Rather than
providing an unused default in math-type-macros.h, that header is made
to give an error if math-type-macros-<type>.h failed to define
declare_mgen_alias or declare_mgen_alias_r. The compat lgamma_r
wrappers are updated similarly. The ldbl-opt versions are removed as
no longer needed.
Tested for x86_64, and with build-many-glibcs.py. Installed stripped
shared libraries are unchanged except for powerpc64le (where the usual
issue applies that an ldbl-opt long double function previously used
long_double_symbol unconditionally and now the symbol versions on
powerpc64le mean weak_alias is used instead, resulting in the same
symbol versions in the final shared library but still enough
difference in the input objects for that library not to be
byte-identical).
* sysdeps/generic/math-type-macros.h [!declare_mgen_alias]: Give
error. Remove default definition of declare_mgen_alias.
[!declare_mgen_alias_r]: Likewise.
* sysdeps/generic/math-type-macros-double.h
[!declare_mgen_alias_r] (declare_mgen_alias_r): New macro.
* sysdeps/generic/math-type-macros-float.h [!declare_mgen_alias_r]
(declare_mgen_alias_r): Likewise.
* sysdeps/generic/math-type-macros-float128.h
[!declare_mgen_alias_r] (declare_mgen_alias_r): Likewise.
* sysdeps/generic/math-type-macros-ldouble.h
[!declare_mgen_alias_r] (declare_mgen_alias_r): Likewise.
* math/w_lgamma_r_template.c (declare_mgen_alias_r_x): Remove
macro.
(declare_mgen_alias_r_s): Likewise.
(declare_mgen_alias_r): Likewise.
* math/w_lgamma_r_compat.c: Include <libm-alias-double.h>.
(lgamma_r): Define using libm_alias_double_r.
* math/w_lgammaf_r_compat.c: Include <libm-alias-float.h>.
(lgammaf_r): Define using libm_alias_float_r.
* math/w_lgammal_r_compat.c: Include <libm-alias-ldouble.h>.
(lgammal_r): Define using libm_alias_ldouble_r.
* sysdeps/ieee754/ldbl-opt/w_lgamma_r_compat.c: Remove file.
* sysdeps/ieee754/ldbl-opt/w_lgammal_r_compat.c: Likewise.
The ldbl-opt version of w_scalbln.c is not in fact needed; it handles
compat symbol versions for libc, but this file isn't built for libc,
only for libm. This patch removes this file.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* sysdeps/ieee754/ldbl-opt/w_scalbln.c: Remove file.
This patch makes the ldbl-128 and ldbl-96 implementations of fma use
libm_alias_double.
Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/ieee754/ldbl-128/s_fma.c: Include <libm-alias-double.h>.
[!__fma] (fma): Define using libm_alias_double.
* sysdeps/ieee754/ldbl-96/s_fma.c: Include <libm-alias-double.h>.
[!__fma] (fma): Define using libm_alias_double.
This patch makes ldbl-128 functions use libm_alias_ldouble to define
function aliases. float128_private.h is updated accordingly. Most of
the ldbl-64-128 wrappers are removed as no longer needed with this
change (leaving those that involve versioning for functions in libc or
that shouldn't be exported from libm for _Float128 / _Float64x types
with the same format as long double).
Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by this patch.
* sysdeps/ieee754/float128/float128_private.h: Include
<libm-alias-ldouble.h> and <libm-alias-float128.h>.
(libm_alias_ldouble_r): Undefine and redefine.
* sysdeps/ieee754/ldbl-128/s_asinhl.c: Include
<libm-alias-ldouble.h>.
(asinhl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_atanl.c: Include
<libm-alias-ldouble.h>.
(atanl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_cbrtl.c: Include
<libm-alias-ldouble.h>.
(cbrtl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_ceill.c: Include
<libm-alias-ldouble.h>.
(ceill): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_copysignl.c: Include
<libm-alias-ldouble.h>.
(copysignl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_cosl.c: Include
<libm-alias-ldouble.h>.
(cosl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_erfl.c: Include
<libm-alias-ldouble.h>.
(erfl): Define using libm_alias_ldouble.
(erfcl): Likewise.
* sysdeps/ieee754/ldbl-128/s_expm1l.c: Include
<libm-alias-ldouble.h>.
(expm1l): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_fabsl.c: Include
<libm-alias-ldouble.h>.
(fabsl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_floorl.c: Include
<libm-alias-ldouble.h>.
(floorl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_fmal.c: Include
<libm-alias-ldouble.h>.
(fmal): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_frexpl.c: Include
<libm-alias-ldouble.h>.
(frexpl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_fromfpl.c (fromfpl): Define using
libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Include
<libm-alias-ldouble.h>.
* sysdeps/ieee754/ldbl-128/s_fromfpxl.c (fromfpxl): Define using
libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Include
<libm-alias-ldouble.h>.
(getpayloadl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_llrintl.c: Include
<libm-alias-ldouble.h>.
(llrintl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_llroundl.c: Include
<libm-alias-ldouble.h>.
(llroundl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_logbl.c: Include
<libm-alias-ldouble.h>.
(logbl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_lrintl.c: Include
<libm-alias-ldouble.h>.
(lrintl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_lroundl.c: Include
<libm-alias-ldouble.h>.
(lroundl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_modfl.c: Include
<libm-alias-ldouble.h>.
(modfl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_nearbyintl.c: Include
<libm-alias-ldouble.h>.
(nearbyintl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c: Include
<libm-alias-ldouble.h>.
(nextafterl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_nextupl.c: Include
<libm-alias-ldouble.h>.
(nextupl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_remquol.c: Include
<libm-alias-ldouble.h>.
(remquol): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_rintl.c: Include
<libm-alias-ldouble.h>.
(rintl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_roundevenl.c: Include
<libm-alias-ldouble.h>.
(roundevenl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_roundl.c: Include
<libm-alias-ldouble.h>.
(roundl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_setpayloadl.c (setpayloadl): Define
using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Include
<libm-alias-ldouble.h>.
* sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c (setpayloadsigl):
Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_sincosl.c: Include
<libm-alias-ldouble.h>.
(sincosl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_sinl.c: Include
<libm-alias-ldouble.h>.
(sinl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_tanhl.c: Include
<libm-alias-ldouble.h>.
(tanhl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_tanl.c: Include
<libm-alias-ldouble.h>.
(tanl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
<libm-alias-ldouble.h>.
(totalorderl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
<libm-alias-ldouble.h>.
(totalordermagl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_truncl.c: Include
<libm-alias-ldouble.h>.
(truncl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_ufromfpl.c (ufromfpl): Define using
libm_alias_ldouble.
* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c (ufromfpxl): Define using
libm_alias_ldouble.
* sysdeps/ieee754/ldbl-64-128/s_copysignl.c: Include
<libm-alias-ldouble.h>.
(weak_alias): Do not undefine and redefine.
[IS_IN (libc)] (libm_alias_ldouble): Undefine and redefine.
(copysignl): Define with long_double_symbol only if [IS_IN
(libc)].
* sysdeps/ieee754/ldbl-64-128/s_frexpl.c: Include
<libm-alias-ldouble.h>.
(weak_alias): Do not undefine and redefine.
[IS_IN (libc)] (libm_alias_ldouble): Undefine and redefine.
(frexpl): Define with long_double_symbol only if [IS_IN (libc)].
* sysdeps/ieee754/ldbl-64-128/s_modfl.c: Include
<libm-alias-ldouble.h>.
(weak_alias): Do not undefine and redefine.
[IS_IN (libc)] (libm_alias_ldouble): Undefine and redefine.
(modfl): Define with long_double_symbol only if [IS_IN (libc)].
* sysdeps/ieee754/ldbl-64-128/s_asinhl.c: Remove file.
* sysdeps/ieee754/ldbl-64-128/s_atanl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_cbrtl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_ceill.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_cosl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_erfl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_expm1l.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_fabsl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_floorl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_fmal.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_llrintl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_llroundl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_logbl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_lrintl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_lroundl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_nearbyintl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_remquol.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_rintl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_roundl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_sincosl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_sinl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_tanhl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_tanl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_truncl.c: Likewise.
Various source files in ldbl-64-128 are redundant, because they wrap
files that no longer provide public symbols that need special
versioning (those symbols having moved to separate errno-setting
wrappers), or, in the case of w_scalblnl.c, because the type-generic
template now does everything required (it deals with symbol versioning
for use in libm, and this file is never built for libc anyway - the
compat scalbln* symbols in libc, as opposed to scalbn*, are only for
i386 and m68k and are aliases to the corresponding scalbn* symbols).
This patch removes those redundant files.
Tested with build-many-glibcs.py (for all ldbl-64-128 configurations)
that installed stripped shared libraries are unchanged by this patch.
* sysdeps/ieee754/ldbl-64-128/e_ilogbl.c: Remove file.
* sysdeps/ieee754/ldbl-64-128/s_log1pl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_scalblnl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/w_scalblnl.c: Likewise.
Recent commit 59ba2d2b54 missed to add __memrchr_power8 in
ifunc list. Also handled discarding unwanted bytes for
unaligned inputs in power8 optimization.
2017-10-05 Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
* sysdeps/powerpc/powerpc64/multiarch/memrchr-ppc64.c: Revert
back to powerpc32 file.
* sysdeps/powerpc/powerpc64/multiarch/memrchr.c
(memrchr): Add __memrchr_power8 to ifunc list.
* sysdeps/powerpc/powerpc64/power8/memrchr.S: Mask
extra bytes for unaligned inputs.
This patch makes ldbl-96 functions use libm_alias_ldouble to define
function aliases.
Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/ieee754/ldbl-96/s_asinhl.c: Include
<libm-alias-ldouble.h>.
(asinhl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_cbrtl.c: Include
<libm-alias-ldouble.h>.
(cbrtl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_copysignl.c: Include
<libm-alias-ldouble.h>.
(copysignl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_cosl.c: Include
<libm-alias-ldouble.h>.
(cosl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_erfl.c: Include
<libm-alias-ldouble.h>.
(erfl): Define using libm_alias_ldouble.
(erfcl): Likewise.
* sysdeps/ieee754/ldbl-96/s_fmal.c: Include
<libm-alias-ldouble.h>.
(fmal): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_frexpl.c: Include
<libm-alias-ldouble.h>.
(frexpl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_fromfpl.c (fromfpl): Define using
libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Include
<libm-alias-ldouble.h>.
* sysdeps/ieee754/ldbl-96/s_fromfpxl.c (fromfpxl): Define using
libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Include
<libm-alias-ldouble.h>.
(getpayloadl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_llrintl.c: Include
<libm-alias-ldouble.h>.
(llrintl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_llroundl.c: Include
<libm-alias-ldouble.h>.
(llroundl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_lrintl.c: Include
<libm-alias-ldouble.h>.
(lrintl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_lroundl.c: Include
<libm-alias-ldouble.h>.
(lroundl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_modfl.c: Include
<libm-alias-ldouble.h>.
(modfl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_nextupl.c: Include
<libm-alias-ldouble.h>.
(nextupl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_remquol.c: Include
<libm-alias-ldouble.h>.
(remquol): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_roundevenl.c: Include
<libm-alias-ldouble.h>.
(roundevenl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_roundl.c: Include
<libm-alias-ldouble.h>.
(roundl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_setpayloadl.c (setpayloadl): Define
using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Include
<libm-alias-ldouble.h>.
* sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Include
<libm-alias-ldouble.h>.
(setpayloadsigl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_sincosl.c: Include
<libm-alias-ldouble.h>.
(sincosl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_sinl.c: Include
<libm-alias-ldouble.h>.
(sinl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_tanhl.c: Include
<libm-alias-ldouble.h>.
(tanhl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_tanl.c: Include
<libm-alias-ldouble.h>.
(tanl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
<libm-alias-ldouble.h>.
(totalorderl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
<libm-alias-ldouble.h>.
(totalordermagl): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_ufromfpl.c (ufromfpl): Define using
libm_alias_ldouble.
* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c (ufromfpxl): Define using
libm_alias_ldouble.
This is an optimized memmove implementation for the Qualcomm Falkor
processor core. Due to the way the falkor memcpy needs to be written,
code cannot be easily shared between memmove and memcpy like in case
of other aarch64 memcpy implementations due to which this routine is
separate. The underlying principle is the same as that of memcpy
where it tries to use registers with the same lower 4 bits for
fetching the same stream, thus optimizing hardware prefetcher
performance.
The memcpy copy loop copies 64 bytes at a time using the same register
pair since that's the way to train the hardware prefetcher on the
falkor core. memmove cannot quite do that since it needs to avoid
overlaps, so it does the next best thing, i.e. has a 32 byte loop with
a 32 byte end (prefetch a loop ahead to account for overlapping
locations) with register pairs that alias so that they hit the same
prefetcher. Due to this difference in loop size, they have to
currently be separate implementations but efforts are on to try and
get memmove to fall back into memcpy whenever it can without simply
duplicating all of the code.
Performance:
The routine fares around 20-25% better than the generic memmove for
most medium to large sizes (i.e. > 128 bytes) for the new walking
memmove benchmark (memmove-walk) with an unexplained regression
between 1K and 2K. The minor regression is something worth looking
into for us, but the remaining gains are significant enough that we
would like this included upstream as we looking into the cause for the
regression. Here is a snippet of the numbers as generated from the
microbenchmark by the compare_strings script. Comparisons are against
__memmove_generic:
Function: memmove
Variant: walk
__memmove_thunderx __memmove_falkor __memmove_generic
========================================================================================================================
<snip>
length=16384: 12508800.00 ( 6.09%) 11486800.00 ( 13.76%) 13319600.00
length=16400: 13614200.00 ( -0.67%) 11585000.00 ( 14.33%) 13523600.00
length=16385: 13448400.00 ( 0.10%) 11732700.00 ( 12.84%) 13461200.00
length=16399: 13594100.00 ( -0.22%) 11859600.00 ( 12.57%) 13564400.00
length=16386: 13211600.00 ( 1.13%) 11503800.00 ( 13.91%) 13362400.00
length=16398: 13218600.00 ( 2.12%) 11573200.00 ( 14.30%) 13504700.00
length=16387: 13510900.00 ( -0.37%) 11744200.00 ( 12.76%) 13461300.00
length=16397: 13603700.00 ( -0.15%) 11878200.00 ( 12.55%) 13583200.00
length=16388: 13461700.00 ( -0.13%) 11558000.00 ( 14.03%) 13444100.00
length=16396: 13517500.00 ( -0.03%) 11561300.00 ( 14.45%) 13513900.00
length=16389: 13534100.00 ( 0.17%) 11756800.00 ( 13.28%) 13556900.00
length=16395: 13585600.00 ( 0.11%) 11791800.00 ( 13.30%) 13601200.00
length=16390: 13480100.00 ( -0.13%) 11685500.00 ( 13.20%) 13462100.00
length=16394: 13529900.00 ( -0.23%) 11549800.00 ( 14.43%) 13498200.00
length=16391: 13595400.00 ( -0.26%) 11768200.00 ( 13.22%) 13560600.00
length=16393: 13567000.00 ( 0.20%) 11779700.00 ( 13.35%) 13594700.00
length=32768: 71308800.00 ( -6.53%) 50220800.00 ( 24.98%) 66939200.00
length=32784: 72100800.00 (-11.55%) 50114100.00 ( 22.47%) 64636300.00
length=32769: 71767000.00 ( -7.10%) 51238400.00 ( 23.54%) 67010000.00
length=32783: 70113700.00 (-40.95%) 51129000.00 ( -2.78%) 49744400.00
length=32770: 71367600.00 ( -6.52%) 50244700.00 ( 25.01%) 67000900.00
length=32782: 64366700.00 ( 4.71%) 50101400.00 ( 25.83%) 67545600.00
length=32771: 71440100.00 ( -6.51%) 51263900.00 ( 23.57%) 67074900.00
length=32781: 66993000.00 ( 0.34%) 51108300.00 ( 23.97%) 67220300.00
length=32772: 71443900.00 (-60.50%) 50062100.00 (-12.47%) 44512600.00
length=32780: 71759100.00 ( -6.58%) 50263200.00 ( 25.35%) 67328600.00
length=32773: 71714900.00 (-33.21%) 51076600.00 ( 5.12%) 53835400.00
length=32779: 71756900.00 ( -6.56%) 51290800.00 ( 23.83%) 67337800.00
length=32774: 59689300.00 (-34.55%) 50068400.00 (-12.86%) 44363300.00
length=32778: 71847500.00 (-18.20%) 50084100.00 ( 17.61%) 60786500.00
length=32775: 71599300.00 ( -6.54%) 51278200.00 ( 23.70%) 67204800.00
length=32777: 71862900.00 (-60.85%) 51094000.00 (-14.36%) 44677900.00
length=65536: 282848000.00 ( -6.60%) 199187000.00 ( 24.93%) 265325000.00
length=65552: 243285000.00 (-41.61%) 198512000.00 (-15.54%) 171805000.00
length=65537: 255415000.00 (-23.47%) 202499000.00 ( 2.11%) 206858000.00
length=65551: 280122000.00 (-62.95%) 203349000.00 (-18.29%) 171911000.00
length=65538: 283676000.00 (-14.46%) 198368000.00 ( 19.96%) 247848000.00
length=65550: 275566000.00 (-51.76%) 198494000.00 ( -9.31%) 181581000.00
length=65539: 283699000.00 ( -6.58%) 203453000.00 ( 23.57%) 266195000.00
length=65549: 286572000.00 ( -6.65%) 202607000.00 ( 24.60%) 268712000.00
length=65540: 283710000.00 ( -6.59%) 199161000.00 ( 25.17%) 266160000.00
length=65548: 237573000.00 ( 11.48%) 198462000.00 ( 26.06%) 268395000.00
length=65541: 284150000.00 ( -6.58%) 203273000.00 ( 23.75%) 266600000.00
length=65547: 286250000.00 ( -6.70%) 202594000.00 ( 24.48%) 268263000.00
length=65542: 284167000.00 ( -6.60%) 199122000.00 ( 25.31%) 266584000.00
length=65546: 285656000.00 ( -6.59%) 198443000.00 ( 25.95%) 268002000.00
length=65543: 284600000.00 ( -6.58%) 203247000.00 ( 23.89%) 267030000.00
length=65545: 285665000.00 ( -6.40%) 202575000.00 ( 24.55%) 268472000.00
<snip>
* sysdeps/aarch64/multiarch/Makefile (sysdep_routines): Add
memmove_falkor.
* sysdeps/aarch64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Likewise.
* sysdeps/aarch64/multiarch/memmove.c: Likewise.
* sysdeps/aarch64/multiarch/memmove_falkor.S: New file.
glibc has an add-ons mechanism to allow additional software to be
integrated into the glibc build. Such add-ons may be within the glibc
source tree, or outside it at a path passed to the --enable-add-ons
configure option.
localedata and crypt were once add-ons, distributed in separate
release tarballs, but long since stopped using that mechanism.
Linuxthreads was always an add-on. Ports spent some time as an add-on
with separate release tarballs, then was first moved into the glibc
source tree, then had its sysdeps files moved into the main sysdeps
hierarchy so the add-ons mechanism was no longer used. NPTL spent
some time as an add-on in the main glibc tree before stopping using
the add-on mechanism. libidn used to have separate release tarballs
but no longer does so, but still uses the add-ons mechanism within the
glibc source tree. Various other software has supported building with
the add-ons mechanism at times in the past, but I don't think any is
still widely used.
Add-ons involve significant, little-used complexity in the glibc build
system, and make it hard to understand what the space of possible
glibc configurations is. This patch removes the add-ons mechanism.
libidn is now built via the Subdirs mechanism to cause any
configuration using sysdeps/unix/inet to build libidn; HAVE_LIBIDN
(which effectively means shared libraries are available) is now
defined via sysdeps/unix/inet/configure. Various references to
add-ons around the source tree are removed (in the case of maint.texi,
the example list of sysdeps directories is still very out of date).
Externally maintained ports should now put their files in the normal
sysdeps directory structure rather than being arranged as add-ons;
they probably need to change e.g. elf.h anyway, rather than actually
being able to work just as a drop-in subtree. Hurd libpthread should
be arranged similarly to NPTL, so some files might go in a
hurd-pthreads (or similar) top-level directory in glibc, while sysdeps
files should go in the normal sysdeps directory structure (possibly in
hurd or hurd-pthreads subdirectories, just as there are nptl
subdirectories in the sysdeps tree).
Tested for x86_64, and with build-many-glibcs.py.
* configure.ac (--enable-add-ons): Remove option.
(machine): Do not mention add-ons in comment.
(LIBC_PRECONFIGURE): Likewise.
(add_ons): Remove variable and sanity checks and logic to locate
add-ons.
(add_ons_automatic): Remove variable.
(configured_add_ons): Likewise.
(add_ons_sfx): Likewise.
(add_ons_pfx): Likewise.
(add_on_subdirs): Likewise.
(sysnames_add_ons): Likewise. Remove loop over add-ons and
consideration of add-ons in Implies handling.
(sysdeps_add_ons): Likewise.
* configure: Regenerated.
* libidn/configure.ac: Remove.
* libidn/configure: Likewise.
* sysdeps/unix/inet/configure.ac: New file.
* sysdeps/unix/inet/configure: New generated file.
* sysdeps/unix/inet/Subdirs: Add libidn.
* Makeconfig (sysdeps-srcdirs): Remove variable.
(+sysdep_dirs): Do not include $(sysdeps-srcdirs).
($(common-objpfx)config.status): Do not depend on add-on files.
($(common-objpfx)shlib-versions.v.i): Do not mention add-ons in
comment.
(all-subdirs): Do not include $(add-on-subdirs).
* Makefile (dist-prepare): Do not use $(sysdeps-add-ons).
* config.make.in (add-ons): Remove variable.
(add-on-subdirs): Likewise.
(sysdeps-add-ons): Likewise.
* manual/Makefile (add-chapters): Remove.
($(objpfx)texis): Do not depend on $(add-chapters).
(nonexamples): Do not handle $(add-chapters).
(examples): Do not handle $(add-ons).
(chapters.% top-menu.%): Do not pass '$(add-chapters)' to
libc-texinfo.sh.
* manual/install.texi (Installation): Do not mention add-ons.
(--enable-add-ons): Do not document configure option.
* INSTALL: Regenerated.
* manual/libc-texinfo.sh: Do not handle $2 add-ons argument.
* manual/maint.texi (Hierarchy Conventions): Do not mention
add-ons.
* scripts/build-many-glibcs.py (Glibc.build_glibc): Do not use
--enable-add-ons.
* scripts/gen-sorted.awk: Do not handle Subdirs files from
add-ons.
* scripts/test-installation.pl: Do not handle glibc-compat add-on.
* sysdeps/nptl/Makeconfig: Do not mention add-ons in comment.
On i386, when multi-arch is enabled, all external functions must be
called via PIC PLT in PIE, which requires setting up EBX register,
since they may be IFUNC functions.
* config.h.in (NO_HIDDEN_EXTERN_FUNC_IN_PIE): New.
* include/libc-symbols.h (__hidden_proto_hiddenattr): Add check
for PIC and NO_HIDDEN_EXTERN_FUNC_IN_PIE.
* sysdeps/i386/configure.ac (NO_HIDDEN_EXTERN_FUNC_IN_PIE): New
AC_DEFINE if multi-arch is enabled.
* sysdeps/i386/configure: Regenerated.
This patch makes dbl-64 fma use libm_alias_double. The ldbl-opt
version is removed. The sparc32 version no longer needs to handle
compat symbols, while alpha needs a new wrapper to avoid getting the
ldbl-128 version (where ldbl-opt is earlier in the list of sysdeps
directories, so previously fma came from there).
Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/ieee754/dbl-64/s_fma.c: Include <libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/ieee754/ldbl-opt/s_fma.c: Remove file.
* sysdeps/sparc/sparc32/fpu/s_fma.c: Do not include
<math_ldbl_opt.h>.
(fmal): Do not define as compat symbol here.
* sysdeps/alpha/fpu/s_fma.c: New file.
32-bit SPARC libm should have compat symbols for copysignl
(GLIBC_2.0), fabsl (GLIBC_2.0), fmal (GLIBC_2.1), pointing to the
double functions; they were present in glibc 2.8, for example, but are
now missing, probably when optimized SPARC function implementations
were added without appropriate compat symbol handling. The same
applies to copysignl in libc. This patch restores those compat
symbols.
Tested with build-many-glibcs.py for sparcv9-linux-gnu.
[BZ #22229]
* sysdeps/sparc/sparc32/fpu/s_copysign.S: Include
<math_ldbl_opt.h>
(copysignl): Define as compat symbol at version GLIBC_2_0 for libm
and libc.
* sysdeps/sparc/sparc32/fpu/s_fabs.S: Include <math_ldbl_opt.h>.
(fabsl): Define as compat symbol at version GLIBC_2_0 for libm.
* sysdeps/sparc/sparc32/fpu/s_fma.c: Include <math_ldbl_opt.h>.
(fmal): Define as compat symbol at version GLIBC_2_1 for libm.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S:
Include <math_ldbl_opt.h>
(copysignl): Define as compat symbol at version GLIBC_2_0 for libm
and libc.
(compat_symbol): Undefine and redefine.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.S: Include
<math_ldbl_opt.h>
(fabsl): Define as compat symbol at version GLIBC_2_0 for libm.
(compat_symbol): Undefine and redefine.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fma.c
[HAVE_AS_VIS3_SUPPORT]: Include <math_ldbl_opt.h>.
[HAVE_AS_VIS3_SUPPORT] (fmal): Define as compat symbol at version
GLIBC_2_1 for libm.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Add
GLIBC_2.0 copysignl symbol.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Add
GLIBC_2.0 copysignl and fabsl and GLIBC_2.1 fmal symbols.
Given my recent changes, sysdeps/alpha/fpu/s_nearbyint.c is no longer
needed: it just includes the dbl-64/wordsize-64 version, which is the
one that would be used anyway, and defines a compat symbol,
duplicating the same compat symbol defined by the dbl-64/wordsize-64
version through use of libm_alias_double. Thus, this patch removes
the redundant wrapper.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for alpha.
* sysdeps/alpha/fpu/s_nearbyint.c: Remove file.
Without SVID compat wrapper yn(n,0) and ynf(n,0) does not raise
the divide-by-zero excpetion and it may return inf with the wrong
sign for n < 0.
[BZ #22244]
* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_yn): Fix x == 0 case.
* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_ynf): Likewise.
On 64bit targets if the SVID compat wrapper is suppressed (e.g. static linking)
then log2(0) and log10(0) returned inf instead of -inf.
[BZ #22243]
* sysdeps/ieee754/dbl-64/wordsize-64/e_log10.c (__ieee754_log10): Use fabs.
* sysdeps/ieee754/dbl-64/wordsize-64/e_log2.c (__ieee754_log2): Likewise.
Don't use "leal main@GOTOFF(%ebx), %eax" since main may be in a
shared object. Linker will convert "movl main@GOT(%ebx), %eax"
to "leal main@GOTOFF(%ebx), %eax" if main is defined locally.
* sysdeps/i386/start.S: Replace "leal main@GOT(%ebx), %eax" with
"movl main@GOTOFF(%ebx), %eax".
This code is used in non-PIE static executable and static PIE. It checks
if _DYNAMIC is undefined before using it to compute load address. But
not all targets can convert access _DYNAMIC via GOT, which needs dynamic
relocation, to PC-relative at link-time.
* sysdeps/i386/dl-machine.h (elf_machine_load_address): Don't
allow undefined _DYNAMIC in PIE libc.a.
* sysdeps/x86_64/dl-machine.h (elf_machine_load_address):
Likewse.
Since mips can't convert access _DYNAMIC via GOT, which needs dynamic
relocation, to PC-relative at link-time, don't check _DYNAMIC in
elf_machine_load_address.
* sysdeps/mips/dl-machine.h (elf_machine_load_address): Don't
check _DYNAMIC.
Since arm can't convert access _DYNAMIC via GOT, which needs dynamic
relocation, to PC-relative at link-time, don't check _DYNAMIC in
elf_machine_load_address.
* sysdeps/arm/dl-machine.h (elf_machine_load_address): Don't
check _DYNAMIC.
This patch makes dbl-64 modf use libm_alias_double. Both the dbl-64
and dbl-64/wordsize-64 versions are changed, and the ldbl-opt version
is changed to define the libc compat symbol only. Because of
multiarch wrappers, the changed implementations are made not to define
aliases at all if __modf is defined as a macro, as with other
functions, so avoiding duplicate compat symbols while allowing those
wrappers to be simplified.
Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged by the patch.
* sysdeps/ieee754/dbl-64/s_modf.c: Include <libm-alias-double.h>.
(modf): Define using libm_alias_double, only if [!__modf].
* sysdeps/ieee754/dbl-64/wordsize-64/s_modf.c: Include
<libm-alias-double.h>.
(modf): Define using libm_alias_double, only if [!__modf].
* sysdeps/ieee754/ldbl-opt/s_modf.c (modfl): Only define libc
compat symbol here.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modf-ppc32.c
(weak_alias): Do not undefine and redefine.
(strong_alias): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf-ppc64.c
(weak_alias): Likewise.
(strong_alias): Likewise.
This patch makes dbl-64 logb use libm_alias_double. Both the dbl-64
and dbl-64/wordsize-64 versions are changed, and the ldbl-opt version
is removed. Because of multiarch wrappers, the changed
implementations are made not to define aliases at all if __logb is
defined as a macro, as with other functions, so avoiding duplicate
compat symbols while allowing those wrappers to be simplified.
Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged (except on alpha
where changes from using the wordsize-64 version are expected).
* sysdeps/ieee754/dbl-64/s_logb.c: Include <libm-alias-double.h>.
(logb): Define using libm_alias_double, only if [!__logb].
* sysdeps/ieee754/dbl-64/wordsize-64/s_logb.c: Include
<libm-alias-double.h>.
(logb): Define using libm_alias_double, only if [!__logb].
* sysdeps/ieee754/ldbl-opt/s_logb.c: Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb-ppc32.c
(weak_alias): Do not undefine and redefine.
(strong_alias): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-ppc64.c
(weak_alias): Likewise.
(strong_alias): Likewise.
For static PIE code, PIC is defined and SHARED is undefined. We
should check SHARED instead PIC for SYSCALL_ERROR_NAME.
* sysdeps/unix/sysv/linux/tile/sysdep.h (SYSCALL_ERROR_NAME):
Check SHARED instead PIC.
This patch makes the implementation of fmaf in the dbl-64 directory
use libm_alias float.
Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged by this patch.
* sysdeps/ieee754/dbl-64/s_fmaf.c: Include <libm-alias-float.h>.
[!__fmaf] (fmaf): Define using libm_alias_float.
This patch makes dbl-64 frexp use libm_alias_double. Both the dbl-64
and dbl-64/wordsize-64 versions are changed; the ldbl-opt version is
made to define only the libc frexpl compat symbol, now the generic
code handles the libm compat symbol automatically.
Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged by this patch.
* sysdeps/ieee754/dbl-64/s_frexp.c: Include <libm-alias-double.h>.
(frexp): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/wordsize-64/s_frexp.c: Include
<libm-alias-double.h>.
(frexp): Define using libm_alias_double.
* sysdeps/ieee754/ldbl-opt/s_frexp.c (frexpl): Only define libc
compat symbol here.
All representations of floating-point numbers in types with IEC 60559
binary exchange format are canonical. On the other hand, types with IEC
60559 extended formats, such as those implemented under ldbl-96 and
ldbl-128ibm, contain representations that are not canonical.
TS 18661-1 introduced the type-generic macro iscanonical, which returns
whether a floating-point value is canonical or not. In Glibc, this
type-generic macro is implemented using the macro __MATH_TG, which, when
support for float128 is enabled, relies on __builtin_types_compatible_p
to select between floating-point types. However, this use of
iscanonical breaks C++ applications, because the builtin is only
available in C mode.
This patch provides a C++ implementation of iscanonical that relies on
function overloading, rather than builtins, to select between
floating-point types.
Unlike the C++ implementations for iszero and issignaling, this
implementation ignores __NO_LONG_DOUBLE_MATH. The double type always
matches IEC 60559 double format, which is always canonical. Thus, when
double and long double are the same (__NO_LONG_DOUBLE_MATH), iscanonical
always returns 1 and is not implemented with __MATH_TG.
Tested for powerpc64, powerpc64le and x86_64.
[BZ #22235]
* math/math.h: Trivial fix for unbalanced parentheses in comment.
* math/Makefile [CXX] (tests): Add test-math-iscanonical.cc.
(CFLAGS-test-math-iscanonical.cc): New variable.
* math/test-math-iscanonical.cc: New file.
* sysdeps/ieee754/ldbl-96/bits/iscanonical.h (iscanonical):
Provide a C++ implementation based on function overloading,
rather than using __MATH_TG, which uses C-only builtins.
* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h (iscanonical):
Likewise.
* sysdeps/powerpc/powerpc64le/Makefile
(CFLAGS-test-math-iscanonical.cc): New variable.
This patch makes more dbl-64 functions use libm_alias_double to define
function aliases. Specifically, it makes the change for functions
with dbl-64/wordsize-64 versions, changing both the dbl-64 and
dbl-64/wordsize-64 versions and removing the ldbl-opt wrappers.
Functions are excluded from this patch if there are complications
because of versions of those functions also present in libc, or
architecture-specific wrappers round these files.
Tested for x86_64, and with build-many-glibcs.py. Installed stripped
shared libraries are unchanged except for alpha (where increased use
of dbl-64/wordsize-64 files, where previously ldbl-opt files that
wrapped dbl-64 files were used, was expected to result in different,
better code).
* sysdeps/ieee754/dbl-64/s_ceil.c: Include <libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_floor.c: Include <libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_llround.c: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_lround.c: Include
<libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_nearbyint.c: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_remquo.c: Include
<libm-alias-double.h>.
(remquo): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_rint.c: Include <libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_round.c: Include <libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_trunc.c: Include <libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/wordsize-64/s_ceil.c: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/wordsize-64/s_floor.c: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
[_LP64] (lround): Likewise.
* sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Include
<libm-alias-double.h>.
[!_LP64] (lround): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/wordsize-64/s_nearbyint.c: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/wordsize-64/s_remquo.c: Include
<libm-alias-double.h>.
(remquo): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/wordsize-64/s_rint.c: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/wordsize-64/s_round.c: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/wordsize-64/s_trunc.c: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/ieee754/ldbl-opt/s_ceil.c: Remove file.
* sysdeps/ieee754/ldbl-opt/s_floor.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_llround.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_lround.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_nearbyint.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_remquo.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_rint.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_round.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_trunc.c: Likewise.
(&_dl_main_map) is used instead of (&bootstrap_map) to bootstrap static
PIE. Define BOOTSTRAP_MAP with (&_dl_main_map) to avoid hardcode to
(&bootstrap_map).
* elf/rtld.c (BOOTSTRAP_MAP): New.
(RESOLVE_MAP): Replace (&bootstrap_map) with BOOTSTRAP_MAP.
* sysdeps/hppa/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC):
Likewise.
* sysdeps/ia64/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC):
Likewise.
* sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC):
Likewise.
On the Hurd, the rtld needs to see its own dumb versions of a few functions
(defined in sysdeps/mach/hurd/dl-sysdep.c) overridden by libc's versions once
loaded. rtld should thus not have hidden attribute for these. To achieve this,
the Hurd port used to just define NO_HIDDEN, which disables it completely. For
now, this changes that to disabling it for all rtld functions, for simplicity.
See Roland's comment on https://sourceware.org/bugzilla/show_bug.cgi?id=15605#c5
The ld.so numbers remain at
8 .rel.plt 000000c8 00000c24 00000c24 00000c24 2**2
CONTENTS, ALLOC, LOAD, READONLY, DATA
9 .plt 000001a0 00000cf0 00000cf0 00000cf0 2**4
CONTENTS, ALLOC, LOAD, READONLY, CODE
10 .plt.got 00000010 00000e90 00000e90 00000e90 2**3
CONTENTS, ALLOC, LOAD, READONLY, CODE
18 .got.plt 00000070 0002d000 0002d000 0002c000 2**2
CONTENTS, ALLOC, LOAD, DATA
which is about 3 times as much as on Linux.
The libc.so numbers get divided by 3 (the remainings are mostly RPC stub calls)
* include/libc-symbols.h [NO_RTLD_HIDDEN] (rtld_hidden_proto,
rtld_hidden_tls_proto, rtld_hidden_def, rtld_hidden_weak,
rtld_hidden_rtld_hidden_ver, data_def, rtld_hidden_data_weak,
rtld_hidden_data_ver): Define to empty.
* include/assert.h [IS_IN(rtld) && NO_RTLD_HIDDEN] (__assert_fail,
__assert_perror_fail): Likewise.
* include/dirent.h [IS_IN(rtld) && NO_RTLD_HIDDEN]
(__rewinddir): Likewise.
* include/libc-internal.h [IS_IN(rtld) && NO_RTLD_HIDDEN]
(__profile_frequency): Likewise.
* include/setjmp.h (__sigsetjmp): Likewise.
* include/signal.h [IS_IN(rtld) && NO_RTLD_HIDDEN] (__sigaction,
__libc_sigaction): Likewise.
* include/stdlib.h [NO_RTLD_HIDDEN] (unsetenv, __strtoul_internal): Do
not set hidden attribute.
* include/string.h [IS_IN(rtld) && NO_RTLD_HIDDEN] (__stpcpy, __strdup,
__strerror_t, __strsep_g, memchr, memcmp, memcpy, memmove, memset,
rawmemchr, stpcpy, strchr, strcmp, strlen, strnlen, strsep): Likewise.
* include/sys/stat.h [IS_IN(rtld) && NO_RTLD_HIDDEN] (__fxstat,
__fxstat64, __lxstat, __lxstat64, __xstat, __xstat64,
__fxstatat64): Likewise.
* include/sys/utsname.h [IS_IN(rtld) && NO_RTLD_HIDDEN]
(__uname): Likewise.
* include/sysdeps/generic/_itoa.h [IS_IN(rtld) && NO_RTLD_HIDDEN]
(_itoa_upper_digits, _itoa_lower_digits): Likewise.
* sysdeps/mach/hurd/configure.ac (NO_HIDDEN): Do not set.
(NO_RTLD_HIDDEN): Set.
* sysdeps/mach/hurd/configure: Refresh.
* config.h.in: Refresh.
This patch makes the dbl-64 atan and tan implementations use
libm_alias_double, removing the corresponding ldbl-opt wrappers.
Tested for x86_64, and with build-many-glibcs.py. Installed stripped
shared libraries are unchanged on non-ldbl-opt platforms. For
ldbl-opt configurations, the patch has the effect of causing
compat_symbol to define atanl and tanl in terms of __atan and __tan
instead of in terms of atan and tan, which is enough to change the
installed stripped libm.so.
* sysdeps/ieee754/dbl-64/s_atan.c: Include <libm-alias-double.h>.
(atan): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_tan.c: Include <libm-alias-double.h>.
(tan): Define using libm_alias_double.
* sysdeps/ieee754/ldbl-opt/s_atan.c: Remove file.
* sysdeps/ieee754/ldbl-opt/s_tan.c: Likewise.
This patch converts the dbl-64 implementations of atan and tan into
weak aliases of __atan and __tan, in preparation for making them use
libm_alias_double. Consequent changes are made to the x86_64
multiarch versions wrapping round them (with the dbl-64 functions,
like other such functions, being made not to define their aliases at
all if __atan or __tan are defined as macros by an including file).
Tested for x86_64, and with build-many-glibcs.py.
* sysdeps/ieee754/dbl-64/s_atan.c (atan): Rename to __atan and
define as weak alias of __atan. Do not define any aliases if
[__atan].
[NO_LONG_DOUBLE] (__atanl): Define as strong alias of __atan.
[NO_LONG_DOUBLE] (atanl): Define as weak alias of __atanl.
* sysdeps/ieee754/dbl-64/s_tan.c (tan): Rename to __tan and define
as weak alias of __tan. Do not define any aliases if [__tan].
[NO_LONG_DOUBLE] (__tanl): Define as strong alias of __tan.
[NO_LONG_DOUBLE] (tanl): Define as weak alias of __tanl.
* sysdeps/x86_64/fpu/multiarch/s_atan-avx.c (atan): Rename to
__atan.
* sysdeps/x86_64/fpu/multiarch/s_atan-fma.c (atan): Likewise.
* sysdeps/x86_64/fpu/multiarch/s_atan-fma4.c (atan): Likewise.
* sysdeps/x86_64/fpu/multiarch/s_atan.c (atan): Rename to __atan
and define as weak alias of __atan.
* sysdeps/x86_64/fpu/multiarch/s_tan-avx.c (tan): Rename to
__atan.
* sysdeps/x86_64/fpu/multiarch/s_tan-fma.c (tan): Likewise.
* sysdeps/x86_64/fpu/multiarch/s_tan-fma4.c (tan): Likewise.
* sysdeps/x86_64/fpu/multiarch/s_tan.c (tan): Rename to __tan and
define as weak alias of __tan.
The new generic logf, log2f and powf code don't need wrappers any more,
they set errno inline so only use the wrappers on targets that need it.
* sysdeps/ieee754/flt-32/e_log2f.c (__log2f): Define without wrapper.
* sysdeps/ieee754/flt-32/e_logf.c (__logf): Likewise
* sysdeps/ieee754/flt-32/e_powf.c (__powf): Likewise
* sysdeps/ieee754/flt-32/w_log2f.c: New file.
* sysdeps/ieee754/flt-32/w_logf.c: New file.
* sysdeps/ieee754/flt-32/w_powf.c: New file.
* sysdeps/i386/fpu/w_log2f.c: New file.
* sysdeps/i386/fpu/w_logf.c: New file.
* sysdeps/i386/fpu/w_powf.c: New file.
* sysdeps/m68k/m680x0/fpu/w_log2f.c: New file.
* sysdeps/m68k/m680x0/fpu/w_logf.c: New file.
* sysdeps/m68k/m680x0/fpu/w_powf.c: New file.
The new generic expf and exp2f code don't need wrappers any more, they
set errno inline, so only use the wrappers on targets that need it.
(If the wrapper is needed, then the top level wrapper code is included,
otherwise empty w_exp*f.c is used to suppress the wrapper.)
A powerpc64 expf implementation includes the expf c code directly which
needed some changes.
* sysdeps/ieee754/flt-32/e_exp2f.c (__exp2f): Define without wrapper.
* sysdeps/ieee754/flt-32/e_expf.c (__expf): Likewise
* sysdeps/ieee754/flt-32/w_exp2f.c: New file.
* sysdeps/ieee754/flt-32/w_expf.c: New file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf-ppc64.c: Update for
the new expf code.
* sysdeps/powerpc/powerpc64/fpu/multiarch/w_expf.c: New file.
* sysdeps/powerpc/powerpc64/power8/fpu/w_expf.c: New file.
* sysdeps/m68k/m680x0/fpu/w_exp2f.c: New file.
* sysdeps/m68k/m680x0/fpu/w_expf.c: New file.
* sysdeps/i386/fpu/w_exp2f.c: New file.
* sysdeps/i386/fpu/w_expf.c: New file.
* sysdeps/i386/i686/fpu/multiarch/w_expf.c: New file.
* sysdeps/x86_64/fpu/w_expf.c: New file.
Vectorized loops are used for sizes greater than 32B to improve
performance over power7 optimization. This shows as an average
of 25% improvement depending on the position of search
character. The performance is same for shorter strings.
Hide internal fadvise64/fallocate64 functions to allow direct access
within libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/posix_fadvise64.c
(__posix_fadvise64_l64): Add Add libc_hidden_proto and
libc_hidden_def.
* sysdeps/unix/sysv/linux/posix_fallocate64.c
(__posix_fallocate64_l64): Likewise.
Hide internal __sched_setaffinity_new function to allow direct access
within libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/sched_setaffinity.c
(__sched_setaffinity_new): Add libc_hidden_proto and
libc_hidden_def.
Hide internal __glob64 function to allow direct access within libc.so
and libc.a without using GOT nor PLT.
[BZ #18822]
* include/glob.h (__glob64): Add libc_hidden_proto.
* sysdeps/unix/sysv/linux/glob64.c (__glob64): Add
libc_hidden_def.
Hide internal __new_getrlimit function to allow direct access within
libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/getrlimit64.c (__new_getrlimit): Add
attribute_hidden.
Hide internal __tcgetattr function to allow direct access within libc.so
and libc.a without using GOT nor PLT.
[BZ #18822]
* include/termios.h (__tcgetattr): Add libc_hidden_proto.
* sysdeps/unix/bsd/tcgetattr.c (__tcgetattr): Add
libc_hidden_def.
* sysdeps/unix/sysv/linux/tcgetattr.c (__tcgetattr): Likewise.
* termios/tcgetattr.c (__tcgetattr): Likewise.
Hide internal __ifreq function to allow direct access within libc.so and
libc.a without using GOT nor PLT.
[BZ #18822]
* include/ifreq.h: New file.
* sysdeps/generic/ifreq.h (__if_nextreq): Removed.
(__ifreq): Likewise.
* sysdeps/mach/hurd/ifreq.h (__if_nextreq): Removed.
(__ifreq): Likewise.
Hide internal idna functions to allow direct access within libc.so and
libc.a without using GOT nor PLT.
[BZ #18822]
* include/idna.h: New file.
* inet/getnameinfo.c: Include <idna.h> instead of
<libidn/idna.h>.
(__idna_to_unicode_lzlz): Removed.
* sysdeps/posix/getaddrinfo.c: Include <idna.h> instead of
<libidn/idna.h>.
(__idna_to_ascii_lz): Removed.
(__idna_to_unicode_lzlz): Likewise.
Hide internal __get_sol function to allow direct access within libc.so
and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/getsourcefilter.c: Include
"getsourcefilter.h".
* sysdeps/unix/sysv/linux/getsourcefilter.h: New file.
* sysdeps/unix/sysv/linux/setsourcefilter.c: Include
"getsourcefilter.h".
(__get_sol): Removed.
Hide internal __bsd_getpt function to allow direct access within
libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/getpt.c (__bsd_getpt): Add
attribute_hidden.
Hide internal __sysinfo function to allow direct access within libc.so and
libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/include/sys/sysinfo.h (__sysinfo): Add
attribute_hidden.
Hide internal __mremap function to allow direct access within libc.so and
libc.a without using GOT nor PLT.
__GI___mremap is defined when sysdeps/unix/syscalls.list is used to
generate mremap. Otherwise libc_hidden_def is needed explicitly.
[BZ #18822]
* include/sys/mman.h (__mremap): Add libc_hidden_proto.
* sysdeps/unix/sysv/linux/m68k/mremap.S (__mremap): Add
libc_hidden_def.
Hide internal __ioctl function to allow direct access within libc.so and
libc.a without using GOT nor PLT.
__GI___ioctl is defined when sysdeps/unix/syscalls.list is used to
generate ioctl. Otherwise libc_hidden_def is needed explicitly.
[BZ #18822]
* include/sys/ioctl.h (__ioctl): Add libc_hidden_proto.
* misc/ioctl.c (__ioctl): Add libc_hidden_def.
* sysdeps/mach/hurd/ioctl.c (__ioctl): Likewise.
* sysdeps/unix/sysv/linux/aarch64/ioctl.S (__ioctl): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/ioctl.S (__ioctl):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/ioctl.c (__ioctl): Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/ioctl.S (__ioctl): Likewise.
Mark internal netlink functions with attribute_hidden to allow direct
access within libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/netlinkaccess.h (__netlink_open): Add
attribute_hidden.
(__netlink_close): Likewise.
(__netlink_free_handle): Likewise.
(__netlink_request): Likewise.
Mark internal dirent functions with attribute_hidden to allow direct
access within libc.so and libc.a without using GOT nor PLT. __readdir64
is hidden with libc_hidden_proto and libc_hidden_def since the exported
readdir64 is an alias of __readdir64.
[BZ #18822]
* include/dirent.h (__opendir): Always add attribute_hidden.
(__fdopendir): Likewise.
(__closedir): Likewise.
(__readdir): Likewise.
(__readdir64): Add libc_hidden_proto.
* sysdeps/mach/hurd/readdir64.c (__readdir64): Add libc_hidden_def.
* sysdeps/unix/sysv/linux/i386/readdir64.c (__readdir64): Likewise.
* sysdeps/unix/sysv/linux/readdir64.c (__readdir64): Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/readdir.c (__GI___readdir64):
New alias.
Mark __internal_statvfs[64] with attribute_hidden to allow direct access
to them within libc.so and libc.a without using GOT nor PLT.
[BZ #18822]
* sysdeps/unix/sysv/linux/fstatvfs.c: Include "internal_statvfs.h"
instead of <sys/statvfs.h>.
(__internal_statvfs): Removed.
* sysdeps/unix/sysv/linux/fstatvfs64.c Include "internal_statvfs.h"
instead of <sys/statvfs.h>.
(__internal_statvfs64): Removed.
* sysdeps/unix/sysv/linux/internal_statvfs.c: Include
"internal_statvfs.h" instead of <sys/statvfs.h>.
* sysdeps/unix/sysv/linux/internal_statvfs.h: New file.
* sysdeps/unix/sysv/linux/statvfs.c Include "internal_statvfs.h"
instead of <sys/statvfs.h>.
(__internal_statvfs): Removed.
* sysdeps/unix/sysv/linux/statvfs64.c Include "internal_statvfs.h"
instead of <sys/statvfs.h>.
(__internal_statvfs64): Removed.
__setcontext on hppa.
* sysdeps/unix/sysv/linux/hppa/getcontext.S (__getcontext): Save return
pointer in frame.
* sysdeps/unix/sysv/linux/hppa/setcontext.S (__setcontext): Likewise.
Correct offset used to restore PIC register.
Continuing the move of libm aliases to common macros that can create
_FloatN / _FloatNx aliases in future, this patch converts some dbl-64
functions to using libm_alias_double, thereby eliminating the need for
some ldbl-opt wrappers.
This patch deliberately limits what functions are converted so that it
can be verified by comparison of stipped binaries. Specifically, atan
and tan are excluded because they first need converting to being weak
aliases; fma is omitted as it has additional complications with
versions in other directories (removing the ldbl-opt version can
e.g. cause the ldbl-128 version to be used instead of dbl-64); and
functions that have both dbl-64/wordsize-64 and ldbl-opt versions are
excluded because ldbl-opt currently always wraps dbl-64 function
versions, so changing those will result in platforms using both
ldbl-opt and dbl-64/wordsize-64 (i.e. alpha) starting to use the
dbl-64/wordsize-64 versions of those functions (which is good, as an
optimization, but still best separated from the present patch to get
better validation).
Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/ieee754/dbl-64/s_asinh.c: Include <libm-alias-double.h>.
(asinh): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_cbrt.c: Include <libm-alias-double.h>.
(cbrt): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_copysign.c: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_erf.c: Include <libm-alias-double.h>.
(erf): Define using libm_alias_double.
(erfc): Likewise.
* sysdeps/ieee754/dbl-64/s_expm1.c: Include <libm-alias-double.h>.
(expm1): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_fabs.c: Include <libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_fromfp.c (fromfp): Define using
libm_alias_double.
* sysdeps/ieee754/dbl-64/s_fromfp_main.c: Include
<libm-alias-double.h>.
* sysdeps/ieee754/dbl-64/s_fromfpx.c (fromfpx): Define using
libm_alias_double.
* sysdeps/ieee754/dbl-64/s_getpayload.c: Include
<libm-alias-double.h>.
(getpayload): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_llrint.c: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_lrint.c: Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_nextup.c: Include
<libm-alias-double.h>.
(nextup): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_roundeven.c: Include
<libm-alias-double.h>.
(roundeven): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_setpayload.c (setpayload): Define using
libm_alias_double.
* sysdeps/ieee754/dbl-64/s_setpayload_main.c: Include
<libm-alias-double.h>.
* sysdeps/ieee754/dbl-64/s_setpayloadsig.c (setpayloadsig): Define
using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_sin.c: Include <libm-alias-double.h>.
(cos): Define using libm_alias_double.
(sin): Likewise.
* sysdeps/ieee754/dbl-64/s_sincos.c: Include
<libm-alias-double.h>.
(sincos): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_tanh.c: Include <libm-alias-double.h>.
(tanh): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_totalorder.c: Include
<libm-alias-double.h>.
(totalorder): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
<libm-alias-double.h>.
(totalordermag): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/s_ufromfp.c (ufromfp): Define using
libm_alias_double.
* sysdeps/ieee754/dbl-64/s_ufromfpx.c (ufromfpx): Define using
libm_alias_double.
* sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Include
<libm-alias-double.h>.
(getpayload): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Include
<libm-alias-double.h>.
(roundeven): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c: Include
<libm-alias-double.h>.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
<libm-alias-double.h>.
(totalorder): Define using libm_alias_double.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
<libm-alias-double.h>.
(totalordermag): Define using libm_alias_double.
* sysdeps/ieee754/ldbl-opt/s_copysign.c (copysignl): Only define
libc compat symbol here.
* sysdeps/ieee754/ldbl-opt/s_asinh.c: Remove file.
* sysdeps/ieee754/ldbl-opt/s_cbrt.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_erf.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_expm1.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_fabs.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_llrint.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_lrint.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_sin.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_sincos.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_tanh.c: Likewise.
When --enable-static-pie is used to configure glibc, we need to use
_dl_relocate_static_pie to compute load address in static PIE.
* sysdeps/arm/dl-machine.h (elf_machine_load_address): Use
_dl_relocate_static_pie instead of _dl_start to compute load
address in static PIE. Return 0 if _DYNAMIC is undefined for
static executable.
mips uses a local label to compute load address, which works with static
PIE. We just need to return 0 if _DYNAMIC is undefined for static
executable.
* sysdeps/mips/dl-machine.h (elf_machine_dynamic): Return 0 if
_DYNAMIC is undefined for static executable.
A few math functions still use __fabs(f/l) rather than fabs, which
means they won't be inlined. Rename them so they are inlined.
Also add -fno-builtin-fabsl to nofpu powerpc makefile to work around
BZ #29253.
* sysdeps/ieee754/dbl-64/e_lgamma_r.c
(__ieee754_lgamma_r): Use fabs rather than __fabs.
* sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10): Likewise.
* sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise.
* sysdeps/ieee754/flt-32/e_lgammaf_r.c
(__ieee754_lgammaf_r): Use fabsf rather than __fabsf.
* sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f): Likewise.
* sysdeps/ieee754/flt-32/e_log2f.c (__ieee754_log2f): Likewise.
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c
(__ieee754_lgammal_r): Use fabsl rather than __fabsl.
* sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Likewise.
* sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c
(__ieee754_lgammal_r): Use fabsl rather than __fabsl.
* sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l): Likewise.
* sysdeps/powerpc/nofpu/Makefile: Add -fno-builtin-fabsl for BZ #29253.
without wrapper on aarch64:
powf reciprocal-throughput: 4.2x faster
powf latency: 2.6x faster
old worst-case error: 1.11 ulp
new worst-case error: 0.82 ulp
aarch64 .text size: -780 bytes
aarch64 .rodata size: +144 bytes
powf(x,y) is implemented as exp2(y*log2(x)) with the same algorithms
that are used in exp2f and log2f, except that the log2f polynomial is
larger for extra precision and its output (and exp2f input) may be
scaled by a power of 2 (POWF_SCALE) to simplify the argument reduction
step of exp2 (possible when efficient round and convert toint operation
is available).
The special case handling tries to minimize the checks in the hot path.
When the input of exp2_inline is checked, int arithmetics is used as
that was faster on the tested aarch64 cores.
* math/Makefile (type-float-routines): Add e_powf_log2_data.
* sysdeps/ieee754/flt-32/e_powf.c: New implementation.
* sysdeps/ieee754/flt-32/e_powf_log2_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h (__powf_log2_data): Define.
(issignalingf_inline): Likewise.
(POWF_LOG2_TABLE_BITS): Likewise.
(POWF_LOG2_POLY_ORDER): Likewise.
(POWF_SCALE_BITS): Likewise.
(POWF_SCALE): Likewise.
* sysdeps/i386/fpu/e_powf_log2_data.c: New file.
* sysdeps/ia64/fpu/e_powf_log2_data.c: New file.
* sysdeps/m68k/m680x0/fpu/e_powf_log2_data.c: New file.
Similar to the new logf: double precision arithmetics and a small
lookup table is used. The argument reduction step is the same as in
the new logf.
without wrapper on aarch64:
log2f reciprocal-throughput: 2.3x faster
log2f latency: 2.1x faster
old worst case error: 1.72 ulp
new worst case error: 0.75 ulp
aarch64 .text size: -252 bytes
aarch64 .rodata size: +244 bytes
* math/Makefile (type-float-routines): Add e_log2f_data.
* sysdeps/ieee754/flt-32/e_log2f.c: New implementation.
* sysdeps/ieee754/flt-32/e_log2f_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h (__log2f_data): Define.
(LOG2F_TABLE_BITS, LOG2F_POLY_ORDER): Define.
* sysdeps/i386/fpu/e_log2f_data.c: New file.
* sysdeps/ia64/fpu/e_log2f_data.c: New file.
* sysdeps/m68k/m680x0/fpu/e_log2f_data.c: New file.
without wrapper on aarch64:
logf reciprocal-throughput: 2.2x faster
logf latency: 1.9x faster
old worst case error: 0.89 ulp
new worst case error: 0.82 ulp
aarch64 .text size: -356 bytes
aarch64 .rodata size: +240 bytes
Uses double precision arithmetics and a lookup table to allow smaller
polynomial and avoid the use of division.
Data is in a separate translation unit with fixed layout to prevent the
compiler generating suboptimal literal access.
Errors are handled inline according to POSIX rules, but this patch
keeps the wrapper with SVID compatible error handling.
Needs libm-test-ulps adjustment for clogf in non-nearest rounding mode.
* math/Makefile (type-float-routines): Add e_logf_data.
* sysdeps/ieee754/flt-32/e_logf.c: New implementation.
* sysdeps/ieee754/flt-32/e_logf_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h (__logf_data): Define.
(LOGF_TABLE_BITS, LOGF_POLY_ORDER): Define.
* sysdeps/i386/fpu/e_logf_data.c: New file.
* sysdeps/ia64/fpu/e_logf_data.c: New file.
* sysdeps/m68k/m680x0/fpu/e_logf_data.c: New file.
When --enable-static-pie is used to build static PIE, _DYNAMIC is used
to compute the load address of static PIE. But _DYNAMIC is undefined
when creating static executable. This patch makes _DYNAMIC weak in PIE
libc.a so that it can be undefined.
* sysdeps/i386/dl-machine.h (elf_machine_load_address): Allow
undefined _DYNAMIC in PIE libc.a.
* sysdeps/x86_64/dl-machine.h (elf_machine_load_address):
Likewse.
Simplify the C99 isgreater macros. Although some support was added
in GCC 2.97, not all targets added support until GCC 3.1. Therefore
only use the builtins in math.h from GCC 3.1 onwards, and defer to
generic macros otherwise. Improve the generic isunordered macro
to use compares rather than call fpclassify twice - this is not only
faster but also correct for signaling NaNs.
* math/math.h: Improve handling of C99 isgreater macros.
* sysdeps/alpha/fpu/bits/mathinline.h: Remove isgreater macros.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h: Likewise.
* sysdeps/powerpc/bits/mathinline.h: Likewise.
* sysdeps/sparc/fpu/bits/mathinline.h: Likewise.
* sysdeps/x86/fpu/bits/mathinline.h: Likewise.
In <https://sourceware.org/ml/libc-alpha/2013-05/msg00722.html> I
remarked on the possibility of arithmetic in various nearbyint
implementations being scheduled before feholdexcept calls, resulting
in spurious "inexact" exceptions.
I'm now actually observing this occurring in glibc built for ARM with
GCC 7 (in fact, both copies of the same addition/subtraction sequence
being combined and moved out before the conditionals and
feholdexcept/fesetenv pairs), resulting in test failures.
This patch makes the nearbyint implementations with this particular
feholdexcept / arithmetic / fesetenv pattern consistently use
math_opt_barrier on the function argument when first used in
arithmetic, and also consistently use math_force_eval before fesetenv
(the latter was generally already done, but the dbl-64/wordsize-64
implementation used math_opt_barrier instead, and as
math_opt_barrier's intended effect is through its output value being
used, such a use that doesn't use the return value is suspect).
Tested for x86_64 (--disable-multi-arch so more of these
implementations get used), and for ARM in a configuration where I saw
the problem scheduling.
[BZ #22225]
* sysdeps/ieee754/dbl-64/s_nearbyint.c (__nearbyint): Use
math_opt_barrier on argument when doing arithmetic on it.
* sysdeps/ieee754/dbl-64/wordsize-64/s_nearbyint.c (__nearbyint):
Likewise. Use math_force_eval not math_opt_barrier after
arithmetic.
* sysdeps/ieee754/flt-32/s_nearbyintf.c (__nearbyintf): Use
math_opt_barrier on argument when doing arithmetic on it.
* sysdeps/ieee754/ldbl-128/s_nearbyintl.c (__nearbyintl):
Likewise.
from `freeaddrinfo'.
`getifaddrs' and `freeifaddrs' are not in POSIX, they should not be
exposed along `freeaddrinfo' (through `__check_pf') which is POSIX.
* include/ifaddrs.h (__getifaddrs, __freeifaddrs): New declarations,
and use libc_hidden_def on them.
* inet/ifaddrs.c (__getifaddrs, __freeifaddrs): Use libc_hidden_def on
them.
* sysdeps/gnu/ifaddrs.c (__getifaddrs, __freeifaddrs): Likewise.
* inet/check_pf.c (__check_pf): Use __getifaddrs and __freeifaddrs
instead of getifaddrs and freeifaddrs.
`seekdir' is MISC || XOPEN, it should not be exposed along `rewinddir' which
is POSIX.
* include/dirent.h (__seekdir): New declaration.
* sysdeps/mach/hurd/seekdir.c (seekdir): Rename to __seekdir and
redefine as weak alias.
* sysdeps/mach/hurd/rewinddir.c (__rewinddir): Use __seekdir instead
of seekdir.
`revoke' is MISC only, it should not be exposed along `unlockpt' which is
XOPEN.
* include/unistd.h (__revoke): New declaration.
* misc/revoke.c (revoke): Rename to __revoke, and redefine as weak
alias.
* sysdeps/mach/hurd/revoke.c (revoke): Likewise.
* sysdeps/unix/bsd/unlockpt.c (unlockpt): Use __revoke instead of
revoke.
dirfd is XOPEN2K8 only, it should not be exposed along ftw which is earlier.
* include/dirent.h (__dirfd): New declaration.
* dirent/dirfd.c (dirfd): Rename to __dirfd, and redefine as weak
alias.
* sysdeps/posix/dirfd/dirfd.c (dirfd): Likewise.
* sysdeps/mach/hurd/dirfd.c (dirfd): Likewise.
* io/ftw.c (open_dir_stream, ftw_dir): Use __dirfd instead of dirfd.
sysdeps/unix/make-syscalls.sh has support, used only by x32, for
generating IFUNCs for kernel VDSO symbols. This support creates
IFUNCs by setting symbol types manually, which is bad for debug info
and does not work with current GCC mainline because it results in
errors from the checks on types of function aliases.
This patch fixes it to use the common __ifunc macro, which uses the
ifunc attribute when available and so works with GCC mainline. Note
however that the original error resulted from an indirect inclusion of
a header declaring __gettimeofday from the generated sources, and
using __ifunc now relies on such an indirect inclusion remaining as it
means use of __typeof to determine the correct types. If glibc's
headers change in such a way as to remove that indirect inclusion, it
will become necessary to change the syscalls.list syntax for VDSO
syscalls so the name of the header to include can be specified.
Tested (compilation only) with build-many-glibcs.py that this fixes
the build for x32 with GCC mainline.
* sysdeps/unix/make-syscalls.sh: Use __ifunc to define symbols
using VDSO.
glibc fails to build with GCC mainline for SPARC because of the use of
manually-created IFUNCs, which fail the tests of compatibility of
function alias types. This patch changes sparc-ifunc.h to use the
generic __ifunc in defining sparc_libm_ifunc. The generic __ifunc can
use the GCC ifunc attribute when available, so ensuring
type-correctness as well as better debug info than when setting symbol
types in asm statements.
Note that for this to fix the build with GCC mainline the GCC patch
<https://gcc.gnu.org/ml/gcc-patches/2017-09/msg01779.html>, or
building GCC with --enable-gnu-indirect-function, is also needed.
Tested (compilation only) with build-many-glibcs.py (sparc64-linux-gnu
and sparcv9-linux-gnu, with GCC 8 with the above patch, and also with
GCC 7).
* sysdeps/sparc/sparc-ifunc.h [!__ASSEMBLER__] (sparc_libm_ifunc):
Define using __ifunc.
As per https://gcc.gnu.org/ml/gcc-patches/2017-09/msg01220.html ia64
defaults to non-executable stacks in the Linux kernel (furthermore,
the use of function descriptors means that trampolines for nested
function pointers never need an executable stack). glibc however
defines DEFAULT_STACK_PERMS to include PF_X for that architecture,
meaning (a) elf/check-execstack fails and (b) (from code inspection,
not tested, but this is why I think this is a user-visible bug) thread
stacks are unnecessarily mapped with execute permission. This patch
fixes the DEFAULT_STACK_PERMS definition in question.
Tested (compilation only) with build-many-glibcs.py for ia64. This
fixes the check-execstack failure.
[BZ #22156]
* sysdeps/ia64/stackinfo.h (DEFAULT_STACK_PERMS): Likewise.
This patch follows commit 5554304f0 (posix: Allow glob to match dangling
symlinks [BZ #866]) by adding a compat symbol that follow previous
semantic of not following dangling symlinks and thus avoiding call
gl_lstat with GLOB_ALTDIRFUNC.
It avoids failure with old binaries that not set the alternate function
pointer for lstat (GNUmake for instance). The following scenario, for
instance, fails with current GNUmake because glibc will access unitialized
memory when calling gl_lstat:
$ cat src/t/t.c
int main ()
{
return 0;
}
$ cat Makefile
SRC = $(wildcard src/*/t.c)
OBJ = $(patsubst src/%.c, obj/%.o, $(SRC))
prog: $(OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) $(LIBS) $(OBJ) -o prog
obj/%.o: src/%.c
$(CC) $(CFLAGS) -c $< -o $@
$ make
This works as expected with the patch applied. Since it is for generic
ABI, default compat symbols are added with override for Linux due LFS.
Now we have two compat symbols for glob on Linux:
1. sysdeps/unix/sysv/linux/oldglob.c which implements glob64 with
the old dirent layout. For this implementation I also set it to
not follow dangling symlinks (which is the safest path).
2. sysdeps/unix/sysv/linux/glob{64}-lstat-compat.c which implements
the compat symbol for dangling symlinks. As for generic glob,
the implementation uses XSTAT_IS_XSTAT64 to define whether
both __glob_lstat_compat and __glob64_lstat_compat should be
different implementations. For archictures that define
XSTAT_IS_XSTAT64, __glob_lstat_compat is aliased to
__glob64_lstat_compat.
3. sysdeps/unix/sysv/linux/alpha/oldglob.c with a different glob_t
layout. As for 1. this patch changes it to not follow dangling
symlinks.
The patch also bumps _GNU_GLOB_INTERFACE_VERSION to 2 to advertise the
new semantic. On GNUmake, for instance, it will force to it use its
internal glob implementation instead and avoiding triggering the same
failure on builds against newer GLIBCs.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also checked
with a build against the major ABIs required to check for the abilist.
The changes should also work on gnulib (I run gnulib-tool.py check glob
and it shown no regressions).
[BZ #22183]
* include/gnu-versions.h (_GNU_GLOB_INTERFACE_VERSION): Increase
version to 2.
* posix/Makefile (routines): Add glob-lstat-compat and
glob64-lstat-compat.
* posix/Versions (GLIBC_2.27, glob, glob64): Add symbol version.
* posix/glob-lstat-compat.c: New file.
* posix/glob64-lstat-compat.c: Likewise.
* posix/tst-glob_lstat_compat.c: Likewise.
* sysdeps/unix/sysv/linux/glob-lstat-compat.c: Likewise.
* sysdeps/unix/sysv/linux/alpha/glob-lstat-compat.c: Likewise.
* sysdeps/unix/sysv/linux/glob64-lstat-compat.c: Likewise.
* sysdeps/unix/sysv/linux/alpha/glob.c: Remove file.
* posix/glob.c (glob_lstat): New function.
(glob): Rename to __glob and add versioned symbol to 2.27.
(glob_in_dir): Use glob_lstat.
* posix/glob64.c (glob64): Add GLOB_ATTRIBUTE.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/glob.c (glob): Add versioned symbol for
2.27.
* sysdeps/unix/sysv/linux/glob64.c (glob64): Likewise.
* sysdeps/unix/sysv/linux/oldglob.c (GLOB_NO_LSTAT): Define.
* sysdeps/unix/sysv/linux/alpha/oldglob.c (__old_glob): Do not use
gl_lstat on glob call.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Add GLIBC_2.27 glob
and glob64 symbols.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
This patch fixes a typo in inclusion guard in sincos32.h.
ChangeLog:
* sysdeps/ieee754/dbl-64/sincos32.h
[SINCCOS32_H]: Remove define.
[SINCOS32_H]: Define.
This patch changes the expf and exp2f error handling semantics to only
set errno accoring to POSIX rules. New symbol version is introduced at
GLIBC_2.27.
The old wrappers are kept for compat symbols.
Internal calls to __expf now get the new error semantics, this seems to
only affect sysdeps/i386/fpu/s_expm1f.S where the errno-only behaviour
should be correct.
ia64 needed assembly change to have the new and compat versioned symbol
map to the same function.
All linux libm abilists are updated.
* math/Versions (expf): New libm symbol at GLIBC_2.27.
(exp2f): Likewise.
* math/w_exp2f.c: New file.
* math/w_expf.c: New file.
* math/w_exp2f_compat.c (__exp2f_compat): For compat symbol only.
* math/w_expf_compat.c (__expf_compat): Likewise.
* sysdeps/ia64/fpu/e_exp2f.S: Add versioned symbols.
* sysdeps/ia64/fpu/e_expf.S: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Based on new expf and exp2f code from
https://github.com/ARM-software/optimized-routines/
with wrapper on aarch64:
expf reciprocal-throughput: 2.3x faster
expf latency: 1.7x faster
without wrapper on aarch64:
expf reciprocal-throughput: 3.3x faster
expf latency: 1.7x faster
without wrapper on aarch64:
exp2f reciprocal-throughput: 2.8x faster
exp2f latency: 1.3x faster
libm.so size on aarch64:
.text size: -152 bytes
.rodata size: -1740 bytes
expf/exp2f worst case nearest rounding error: 0.502 ulp
worst case non-nearest rounding error: 1 ulp
Error checks are inline and errno setting is in separate tail called
functions, but the wrappers are kept in this patch to handle the
_LIB_VERSION==_SVID_ case. (So e.g. errno is set twice for expf calls
and once for __expf_finite calls on targets where the new code is used.)
Double precision arithmetics is used which is expected to be faster on
most targets (including soft-float) than using single precision and it
is easier to get good precision result with it.
Const data is kept in a separate translation unit which complicates
maintenance a bit, but is expected to give good code for literal loads
on most targets and allows sharing data across expf, exp2f and powf.
(This data is disabled on i386, m68k and ia64 which have their own
expf, exp2f and powf code.)
Some details may need target specific tweaks:
- best convert and round to int operation in the arg reduction may be
different across targets.
- code was optimized on fma target, optimal polynomial eval may be
different without fma.
- gcc does not always generate good code for fp bit representation
access via unions or it may be inherently slow on some targets.
The libm-test-ulps will need adjustment because..
- The argument reduction ideally uses nearest rounded rint, but that is
not efficient on most targets, so the polynomial can get evaluated on a
wider interval in non-nearest rounding mode making 1 ulp errors common
in that case.
- The polynomial is evaluated such that it may have 1 ulp error on
negative tiny inputs with upward rounding.
* math/Makefile (type-float-routines): Add math_errf and e_exp2f_data.
* sysdeps/aarch64/fpu/math_private.h (TOINT_INTRINSICS): Define.
(roundtoint, converttoint): Likewise.
* sysdeps/ieee754/flt-32/e_expf.c: New implementation.
* sysdeps/ieee754/flt-32/e_exp2f.c: New implementation.
* sysdeps/ieee754/flt-32/e_exp2f_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h: New file.
* sysdeps/ieee754/flt-32/math_errf.c: New file.
* sysdeps/ieee754/flt-32/t_exp2f.h: Remove.
* sysdeps/i386/fpu/e_exp2f_data.c: New file.
* sysdeps/i386/fpu/math_errf.c: New file.
* sysdeps/ia64/fpu/e_exp2f_data.c: New file.
* sysdeps/ia64/fpu/math_errf.c: New file.
* sysdeps/m68k/m680x0/fpu/e_exp2f_data.c: New file.
* sysdeps/m68k/m680x0/fpu/math_errf.c: New file.
conform/ISO11/time.h/linknamespace complains that using timespec_get exposes
gettimeofday.
conform/POSIX/time.h/linknamespace complains that using clock_settime
exposes settimeofday.
* sysdeps/unix/clock_gettime.c (realtime_gettime, __clock_gettime): Use
__gettimeofday instead of gettimeofday.
* sysdeps/unix/clock_settime.c (__clock_settime): Use __settimeofday
instead of settimeofday.
* sysdeps/mach/hurd/bits/socket.h: Include <bits/wordsize.h> instead
of <limits.h>
(__need_NULL): Do not define.
(__ss_aligntype): Use __WORDSIZE instead of ULONG_MAX to determine
alignment.
[!__USE_MISC] (pseudo_AF_XTP, pseudo_AF_RTIP, pseudo_AF_PIP,
CMGROUP_MAX, cmsgcred): Do not define.
(CMSG_FIRSTHDR, __cmsg_nxthdr): Use (struct cmsghdr *) 0 instead of
NULL.
* bits/socket.h: Likewise.
* sysdeps/mach/hurd/dl-sysdep.c (check_no_hidden): New macro.
(__open, __close, __libc_read, __libc_write, __writev, __libc_lseek64,
__mmap, __fxstat64, __xstat64, __access, __access_noerrno, __getpid,
__getcwd, __sbrk, __strtoul_internal, _exit, abort): Use check_no_hidden
to make sure that these symbols are defined.
This patch makes flt-32 libm functions use libm_alias_float to define
public interfaces (in cases where _Float32 aliases of those interfaces
would be appropriate, so not for finitef / isinff / isnanf).
Tested for x86_64. Also tested with build-many-glibcs.py that
installed stripped shared libraries are unchanged by the patch.
* sysdeps/ieee754/flt-32/s_asinhf.c: Include <libm-alias-float.h>.
(asinhf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_atanf.c: Include <libm-alias-float.h>.
(atanf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_cbrtf.c: Include <libm-alias-float.h>.
(cbrtf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_ceilf.c: Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_copysignf.c: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_cosf.c: Include <libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_erff.c: Include <libm-alias-float.h>.
(erff): Define using libm_alias_float.
(erfcf): Likewise.
* sysdeps/ieee754/flt-32/s_expm1f.c: Include <libm-alias-float.h>.
(expm1f): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_fabsf.c: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_floorf.c: Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_frexpf.c: Include <libm-alias-float.h>.
(frexpf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_fromfpf.c (fromfpf): Define using
libm_alias_float.
* sysdeps/ieee754/flt-32/s_fromfpf_main.c: Include
<libm-alias-float.h>.
* sysdeps/ieee754/flt-32/s_fromfpxf.c (fromfpxf): Define using
libm_alias_float.
* sysdeps/ieee754/flt-32/s_getpayloadf.c: Include
<libm-alias-float.h>.
(getpayloadf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_llrintf.c: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_llroundf.c: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_logbf.c: Include <libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_lrintf.c: Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_lroundf.c: Include <libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_modff.c: Include <libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_nearbyintf.c: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_nextafterf.c: Include
<libm-alias-float.h>.
(nextafterf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_nextupf.c: Include
<libm-alias-float.h>.
(nextupf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_remquof.c: Include
<libm-alias-float.h>.
(remquof): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_rintf.c: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_roundevenf.c: Include
<libm-alias-float.h>.
(roundevenf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_roundf.c: Include <libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_setpayloadf.c (setpayloadf): Define
using libm_alias_float.
* sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Include
<libm-alias-float.h>.
* sysdeps/ieee754/flt-32/s_setpayloadsigf.c (setpayloadsigf):
Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_sincosf.c: Include
<libm-alias-float.h>.
(sincosf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_sinf.c: Include <libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_tanf.c: Include <libm-alias-float.h>.
(tanf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_tanhf.c: Include <libm-alias-float.h>.
(tanhf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Include
<libm-alias-float.h>.
(totalorderf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
<libm-alias-float.h>.
(totalordermagf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_truncf.c: Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/ieee754/flt-32/s_ufromfpf.c (ufromfpf): Define using
libm_alias_float.
* sysdeps/ieee754/flt-32/s_ufromfpxf.c (ufromfpxf): Define using
libm_alias_float.
The IEEE 754 implementation of lgammal in sysdeps/ieee754/ldbl-128/ used
to be shared by IBM's implementation in sysdeps/ieee754/ldbl-128ibm/ (by
an inclusion of the source file). In order for the algorithm to work
for IBM's implementation, a check for LDBL_MANT_DIG was required. Since
the source file is no longer shared, the requirement for the check is
gone. This patch removes the conditionals.
Tested for powerpc64le and s390x.
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
Remove conditionals on LDBL_MANT_DIG.
* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c
(__ieee754_lgammal_r): Likewise.
The ldbl-128ibm implementation of j0l, j1l, lgammal_r, and cbrtl, as
well as the tables used by expl were copied from ldbl-128. However, the
original files used _Float128 for the type and L() for the literal
suffix. This patch uses the following sed command to rewrite _Float128
as long double and L(x) as xL (for e_expl.c, e_j0l.c, e_j1l.c,
e_lgammal_r.c, and t_expl.h):
sed -i <filename> \
-e "/^#define _Float128 long double/d" \
-e "/^#define L(x) x ## L/d" \
-e "/L(/s/)/L/" \
-e "/L(/s/L(//" \
-e "s/_Float128/long double/g"
For sysdeps/ieee754/ldbl-128ibm/s_cbrtl.c, this sed command incorrectly
replaces a few occurrences of L(), so the following command is used
instead:
sed -i sysdeps/ieee754/ldbl-128ibm/s_cbrtl.c \
-e "/^#define _Float128 long double/d" \
-e "/^#define L(x) x ## L/d" \
-e "s/L(0\.3\{40\})/0.3333333333333333333333333333333333333333L/" \
-e "s/L(3\.7568280825958912391243e-1)/3.7568280825958912391243e-1L/" \
-e "/L(/s/)/L/" \
-e "/L(/s/L(//" \
-e "s/_Float128/long double/g"
Tested for powerpc64le with patched [1] and unpatched gcc.
[1] https://gcc.gnu.org/ml/gcc-patches/2017-08/msg01028.html
* sysdeps/ieee754/ldbl-128ibm/e_expl.c: Remove definitions of
_Float128 and L().
* sysdeps/ieee754/ldbl-128ibm/e_j0l.c: Remove definitions of
_Float128 and L(). Replace _Float128 with long double and L(x)
with xL, throughout the file.
* sysdeps/ieee754/ldbl-128ibm/e_j1l.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_cbrtl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/t_expl.h: Likewise.
Some files under sysdeps/ieee754/ldbl-128ibm/ are able to reuse the
implementation in sysdeps/ieee754/ldbl-128/ by defining _Float128 to
long double. This relied on compiler support for _Float128 being
disabled. On powerpc, such support was disabled by default, however, it
got enabled by default [1] in GCC 8.
This patch copies the implementations from ldbl-128 to ldbl-128ibm. The
uses of _Float128 and L() are kept intact in this patch and are replaced
with a script in a subsequent patch.
[1] https://gcc.gnu.org/ml/gcc-patches/2017-08/msg01028.html
Tested for powerpc64 and powerpc64le.
* sysdeps/ieee754/ldbl-128ibm/e_expl.c: Include tables from
sysdeps/ieee754/ldbl-128ibm.
* sysdeps/ieee754/ldbl-128ibm/e_j0l.c: Copy contents from the
equivalent implementation in sysdeps/ieee754/ldbl-128/ instead
of including it. Keep _Float128 and L() intact. These will be
reviewed by a separate patch.
* sysdeps/ieee754/ldbl-128ibm/e_j1l.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_cbrtl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/t_expl.h: Likewise.
On powerpc64le, compiler support for float128 is not enabled by default
on gcc. To enable it, the flag -mfloat128 must be passed as a command
line option to the compiler. This means that only the few files that
actively have -mfloat128 passed as an argument get compiler support for
float128, whereas all other files don't.
When -mfloat128 becomes enabled by default on powerpc [1], all the files
that do not currently have compiler support for float128 enabled during
their compilation, will start to have it. This will lead to build
errors in s_finite.c, s_isinf.c, and s_isnan.c.
The errors are due to the unintended macro expansion of __finitef128 to
__redirect_finitef128 in math/bits/mathcalls-helper-functions.h. In
that header, __MATHDECL_1 takes '__finite' and 'f128' as arguments and
concatenates them. However, since '__finite' has been redefined in
s_finite.c, the function declaration becomes __redirect_finitef128:
extern int __redirect___finitef128 (_Float128 __value) __attribute__ ((__nothrow__ )) __attribute__ ((__const__));
This declaration itself is OK. The problem arises when include/math.h
creates the hidden prototype ('hidden_proto (__finitef128)'), which
expands to:
extern __typeof (__finitef128) __finitef128 __attribute__ ((visibility ("hidden")));
Since __finitef128 is not declared, __typeof fails. This effect was
already true for the 'float' and 'long double' versions and is now true
for float128. Likewise for isinsff128 and isnanf128.
This patch defines __finitef128 as __redirect___finitef128 in
sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite.c, similarly to what's
done for the float and long double versions of these functions, to get
rid of the build error. Likewise for isinff128 and isnanf128.
[1] https://gcc.gnu.org/ml/gcc-patches/2017-08/msg01028.html
Tested for powerpc64 and powerpc64le.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite.c
(__finitef128): Define to __redirect___finitef128.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf.c
(__isinff128): Define to __redirect___isinff128.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan.c
(__isnanf128): Define to __redirect___isnanf128.
On powerpc64le, not all files can have the flag -mfloat128 passed as an
option on the compile command, since that could conflict with other
flags, such as -mno-vsx. Each file that needs the flag, gets it through
a CFLAGS-filename variable on sysdeps/powerpc/powerpc64le/Makefile.
The test cases tst-strtod-nan-locale and tst-wcstod-nan-locale are
missing this flag.
Tested for powerpc64le.
* sysdeps/powerpc/powerpc64le/Makefile
(CFLAGS-tst-strtod-nan-locale.c): New variable.
(CFLAGS-tst-wcstod-nan-locale.c): New variable.
This patch adds SSE4.1 versions of trunc and truncf, using the roundsd
/ roundss instructions, similar to the versions of ceil, floor, rint
and nearbyint functions we already have. In my testing with the glibc
benchtests these are about 30% faster than the C versions for double,
20% faster for float.
Tested for x86_64.
[BZ #20142]
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_trunc-c, s_truncf-c, s_trunc-sse4_1 and s_truncf-sse4_1.
* sysdeps/x86_64/fpu/multiarch/s_trunc-c.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_trunc-sse4_1.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_trunc.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_truncf-c.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_truncf-sse4_1.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_truncf.c: Likewise.
The recent fexecve changes broke the build on (at least) alpha (maybe
other configurations, that was the first breakage I saw in my
build-many-glibcs.py run):
In file included from ../sysdeps/unix/sysv/linux/alpha/sysdep.h:29:0,
from ../sysdeps/alpha/nptl/tls.h:31,
from ../include/errno.h:25,
from ../sysdeps/unix/sysv/linux/fexecve.c:18:
../sysdeps/unix/sysv/linux/fexecve.c: In function 'fexecve':
../sysdeps/unix/alpha/sysdep.h:203:10: error: 'sizeof' on array function parameter 'argv' will return size of 'char * const*' [-Werror=sizeof-array-argument]
(sizeof(arg) == 4 ? (long)(int)(long)(arg) : (long)(arg))
^
../sysdeps/unix/alpha/sysdep.h:302:26: note: in expansion of macro 'syscall_promote'
register long _tmp_18 = syscall_promote (arg3); \
^~~~~~~~~~~~~~~
../sysdeps/unix/alpha/sysdep.h:173:2: note: in expansion of macro 'inline_syscall5'
inline_syscall##nr(__NR_##name, args); \
^~~~~~~~~~~~~~
../sysdeps/unix/sysv/linux/alpha/sysdep.h:85:2: note: in expansion of macro 'INLINE_SYSCALL1'
INLINE_SYSCALL1(name, nr, args); \
^~~~~~~~~~~~~~~
../sysdeps/unix/sysv/linux/fexecve.c:42:3: note: in expansion of macro 'INLINE_SYSCALL'
INLINE_SYSCALL (execveat, 5, fd, "", argv, envp, AT_EMPTY_PATH);
^~~~~~~~~~~~~~
../sysdeps/unix/sysv/linux/fexecve.c:33:30: note: declared here
fexecve (int fd, char *const argv[], char *const envp[])
^~~~
This patch fixes this similarly to previous fixes for such issues: use
&argv[0] and &envp[0] as the syscall macro arguments. Tested
(compilation only) for alpha-linux-gnu with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/fexecve.c (fexecve) [__NR_execveat]:
Explicitly take address of first element of array arguments in
call to INLINE_SYSCALL.
Add unwind info to __libc_start_main so that unwinding continues one
extra level to _start. Similarly add unwind info to backtrace.
Given many targets require this, do this in a general way.
* csu/Makefile: Add -funwind-tables to libc-start.c.
* debug/Makefile: Add -funwind-tables to backtrace.c.
* sysdeps/aarch64/Makefile: Remove CFLAGS-backtrace.c.
* sysdeps/arm/Makefile: Likewise.
* sysdeps/i386/Makefile: Likewise.
* sysdeps/m68k/Makefile: Likewise.
* sysdeps/mips/Makefile: Likewise.
* sysdeps/nios2/Makefile: Likewise.
* sysdeps/sh/Makefile: Likewise.
* sysdeps/sparc/Makefile: Likewise.
As per the section "3.1.4.2 Alignment Interrupts" of the "POWER8 Processor
User's Manual for the Single-Chip Module", alignment interrupt is reported
for misaligned stores in Caching-inhibited storage. As memset is used in
some drivers for DMA (like xorg), this patch avoids misaligned stores for
sizes less than 8 in memset.
This patch fixes a problem on powerpc64le that I missed in initial
testing of my last patch to ldbl-opt. In the specific case of
powerpc64le, the weak aliases for exp10l and remainderl do not get
defined in the generic wrappers because of how those wrappers
undefine and redefine weak_alias. This patch restores those aliases
in the ldbl-opt code.
Tested (compilation only) for powerpc64le with build-many-glibcs.py.
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c [LIBM_SVID_COMPAT &&
!LONG_DOUBLE_COMPAT (libm, GLIBC_2_1)] (weak_alias): Undefine and
redefine.
[LIBM_SVID_COMPAT && !LONG_DOUBLE_COMPAT (libm, GLIBC_2_1)]
(exp10l): Define as weak alias.
* sysdeps/ieee754/ldbl-opt/w_remainderl_compat.c [LIBM_SVID_COMPAT
&& !LONG_DOUBLE_COMPAT (libm, GLIBC_2_0)] (weak_alias): Undefine
and redefine.
[LIBM_SVID_COMPAT && !LONG_DOUBLE_COMPAT (libm, GLIBC_2_0)]
(remainderl): Define as weak alias.
This patch converts libm function implementations in math/ from using
weak_alias to using libm_alias_ldouble to define public function
names, in cases where it would be appropriate to define _Float128 /
_Float64x aliases for those functions as well (in cases where either
or both of those types exist and have the same ABI as long double).
This eliminates many ldbl-opt wrappers round these function
implementations.
Tested for x86_64, and with build-many-glibcs.py. All installed
stripped shared libraries are unchanged except for libm.so on
powerpc64le. As noted for a previous patch, powerpc64le's use of
ldbl-opt means various long double functions get defined using
long_double_symbol which gives them an explicit symbol version in the
object files, and this patch results in some such functions using
weak_alias instead (because powerpc64le never had a previous version
of these functions for long double = double); both produce a valid
libm.so with the same public symbols at the same versions, but macros
expanding to call weak_alias is cleaner in this case.
* math/s_fmal.c: Include <libm-alias-ldouble.h>.
(fmal): Define using libm_alias_ldouble.
* math/w_acoshl_compat.c: Include <libm-alias-ldouble.h>.
(acoshl): Define using libm_alias_ldouble.
* math/w_acosl_compat.c: Include <libm-alias-ldouble.h>.
(acosl): Define using libm_alias_ldouble.
* math/w_asinl_compat.c: Include <libm-alias-ldouble.h>.
(asinl): Define using libm_alias_ldouble.
* math/w_atan2l_compat.c: Include <libm-alias-ldouble.h>.
(atan2l): Define using libm_alias_ldouble.
* math/w_atanhl_compat.c: Include <libm-alias-ldouble.h>.
(atanhl): Define using libm_alias_ldouble.
* math/w_coshl_compat.c: Include <libm-alias-ldouble.h>.
(coshl): Define using libm_alias_ldouble.
* math/w_exp10l_compat.c: Include <libm-alias-ldouble.h>.
(exp10l): Define using libm_alias_ldouble.
* math/w_exp2l_compat.c: Include <libm-alias-ldouble.h>.
(exp2l): Define using libm_alias_ldouble.
* math/w_expl_compat.c: Include <libm-alias-ldouble.h>.
(expl): Define using libm_alias_ldouble.
* math/w_fmodl_compat.c: Include <libm-alias-ldouble.h>.
(fmodl): Define using libm_alias_ldouble.
* math/w_hypotl_compat.c: Include <libm-alias-ldouble.h>.
(hypotl): Define using libm_alias_ldouble.
* math/w_j0l_compat.c: Include <libm-alias-ldouble.h>.
(j0l): Define using libm_alias_ldouble.
(y0l): Likewise.
* math/w_j1l_compat.c: Include <libm-alias-ldouble.h>.
(j1l): Define using libm_alias_ldouble.
(y1l): Likewise.
* math/w_jnl_compat.c: Include <libm-alias-ldouble.h>.
(jnl): Define using libm_alias_ldouble.
(ynl): Likewise.
* math/w_log10l_compat.c: Include <libm-alias-ldouble.h>.
(log10l): Define using libm_alias_ldouble.
* math/w_log2l_compat.c: Include <libm-alias-ldouble.h>.
(log2l): Define using libm_alias_ldouble.
* math/w_logl_compat.c: Include <libm-alias-ldouble.h>.
(logl): Define using libm_alias_ldouble.
* math/w_powl_compat.c: Include <libm-alias-ldouble.h>.
(powl): Define using libm_alias_ldouble.
* math/w_remainderl_compat.c: Include <libm-alias-ldouble.h>.
(remainderl): Define using libm_alias_ldouble.
* math/w_sinhl_compat.c: Include <libm-alias-ldouble.h>.
(sinhl): Define using libm_alias_ldouble.
* math/w_sqrtl_compat.c: Include <libm-alias-ldouble.h>.
(sqrtl): Define using libm_alias_ldouble.
* math/w_tgammal_compat.c: Include <libm-alias-ldouble.h>.
(tgammal): Define using libm_alias_ldouble.
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c [LIBM_SVID_COMPAT]
(exp10l): Do not use long_double_symbol here.
* sysdeps/ieee754/ldbl-opt/w_remainderl_compat.c
[LIBM_SVID_COMPAT] (remainderl): Likewise.
* sysdeps/ieee754/ldbl-opt/s_fmal.c: Remove.
* sysdeps/ieee754/ldbl-opt/w_acoshl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_acosl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_asinl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_atan2l_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_atanhl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_coshl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_fmodl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_hypotl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_j0l_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_j1l_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_jnl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_log10l_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_log2l_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_logl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_powl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_sinhl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_sqrtl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_tgammal_compat.c: Likewise.
eXecute-Only Memory (XOM) is a protection mechanism against some ROP
attacks. XOM sets the code as executable and unreadable, so the access
to any data, like literal pools, in the code section causes the fault
with XOM. The compiler can disable literal pools for C source files,
but not for assembly files, so I use movz/movk instead of literal pools
in start.S for XOM.
I add MOVL macro with movz/movk instructions like movl pseudo-instruction
in armasm, and use the macro instead of literal pools.
* sysdeps/aarch64/start.S: Use MOVL instead of literal pools.
* sysdeps/aarch64/sysdep.h (MOVL): Add MOVL macro.
This patch converts libm function implementations in math/ from using
weak_alias to using libm_alias_double to define public function names,
in cases where it would be appropriate to define _Float64 / _Float32x
aliases for those functions as well. This eliminates many
NO_LONG_DOUBLE conditionals and ldbl-opt wrappers round these function
implementations.
Tested for x86_64. Also tested with build-many-glibcs.py. Binary
differences seen are that the different order in which remainder and
drem symbols get defined as a result of this patch (the same source
file defines the same aliases, but in a different order of definition)
changes the order of symbols in the final libm.so when long double =
double, and for ldbl-opt configurations, the compat symbols for Bessel
functions were previously defined by e.g. "compat_symbol (libm, j0,
j0l, GLIBC_2_0)", which declares j0l as a compat symbol based on j0
and so makes j0l weak because j0 is weak, and are now defined
(indirectly via the relevant macros) based on e.g. __j0, so are no
longer weak because __j0 isn't weak.
* math/s_fma.c: Include <libm-alias-double.h>.
(fma): Define using libm_alias_double.
* math/s_nextafter.c: Include <libm-alias-double.h>.
(nextafter): Define using libm_alias_double.
* math/w_acos_compat.c: Include <libm-alias-double.h>.
(acos): Define using libm_alias_double.
* math/w_acosh_compat.c: Include <libm-alias-double.h>.
(aocsh): Define using libm_alias_double.
* math/w_asin_compat.c: Include <libm-alias-double.h>.
(asin): Define using libm_alias_double.
* math/w_atan2_compat.c: Include <libm-alias-double.h>.
(atan2): Define using libm_alias_double.
* math/w_atanh_compat.c: Include <libm-alias-double.h>.
(atanh): Define using libm_alias_double.
* math/w_cosh_compat.c: Include <libm-alias-double.h>.
(cosh): Define using libm_alias_double.
* math/w_exp10_compat.c: Include <libm-alias-double.h>.
(exp10): Define using libm_alias_double.
* math/w_exp2_compat.c: Include <libm-alias-double.h>.
(exp2): Define using libm_alias_double.
* math/w_exp_compat.c: Include <libm-alias-double.h>.
(exp): Define using libm_alias_double.
* math/w_fmod_compat.c: Include <libm-alias-double.h>.
(fmod): Define using libm_alias_double.
* math/w_hypot_compat.c: Include <libm-alias-double.h>.
(hypot): Define using libm_alias_double.
* math/w_j0_compat.c: Include <libm-alias-double.h>.
(j0): Define using libm_alias_double.
(y0): Likewise.
* math/w_j1_compat.c: Include <libm-alias-double.h>.
(j1): Define using libm_alias_double.
(y1): Likewise.
* math/w_jn_compat.c: Include <libm-alias-double.h>.
(jn): Define using libm_alias_double.
(yn): Likewise.
* math/w_log10_compat.c: Include <libm-alias-double.h>.
(log10): Define using libm_alias_double.
* math/w_log2_compat.c: Include <libm-alias-double.h>.
(log2): Define using libm_alias_double.
* math/w_log_compat.c: Include <libm-alias-double.h>.
(log): Define using libm_alias_double.
* math/w_pow_compat.c: Include <libm-alias-double.h>.
(pow): Define using libm_alias_double.
* math/w_remainder_compat.c: Include <libm-alias-double.h>.
(remainder): Define using libm_alias_double.
* math/w_sinh_compat.c: Include <libm-alias-double.h>.
(sinh): Define using libm_alias_double.
* math/w_sqrt_compat.c: Include <libm-alias-double.h>.
(sqrt): Define using libm_alias_double.
* math/w_tgamma_compat.c: Include <libm-alias-double.h>.
(tgamma): Define using libm_alias_double.
* sysdeps/ieee754/ldbl-opt/s_nextafter.c [LONG_DOUBLE_COMPAT(libm,
GLIBC_2_0)] (nextafterl): Do not define compat symbol here.
* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_1)] (exp10l): Likewise.
* sysdeps/ieee754/ldbl-opt/w_remainder_compat.c
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (remainderl): Likewise.
* sysdeps/ieee754/ldbl-opt/w_acos_compat.c: Remove.
* sysdeps/ieee754/ldbl-opt/w_acosh_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_asin_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_atan2_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_atanh_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_cosh_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_exp_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_fmod_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_hypot_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_j0_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_j1_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_jn_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_log10_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_log2_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_log_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_pow_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_sinh_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_sqrt_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_tgamma_compat.c: Likewise.
Some math functions have to be distributed in libc because they're
required by printf.
libc and libm require their own builds of these functions, e.g. libc
functions have to call __stack_chk_fail_local in order to bypass the
PLT, while libm functions have to call __stack_chk_fail.
While math/Makefile treat the generic cases, i.e. s_isinff, the
multiarch Makefile has to treat its own files, i.e. s_isinff-ppc64.
[BZ #21745]
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile:
[$(subdir) = math] (sysdep_calls): New variable. Has the
previous contents of sysdep_routines, but re-sorted..
[$(subdir) = math] (sysdep_routines): Re-use the contents from
sysdep_calls.
[$(subdir) = math] (libm-sysdep_routines): Remove the functions
defined in sysdep_calls and replace by the respective m_* names.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-ppc64.S:
(compat_symbol): Undefine to avoid duplicated compat symbols in
libc.
Many libm functions define the function as __<func> and then define
<func> as a weak alias. This is not at all limited to cases where
there is an internal call that has namespace reasons to need to call
__<func> instead of <func>.
The common macros for creating libm function aliases work on the basis
of public function names all being aliases; that is, they define
aliases for functions using the above pattern. Thus, where a function
just defines the public name <func> directly, changing that to be a
weak alias enables a subsequent conversion to the common macros to
retain the exact existing symbols (and so be testable by comparison of
stripped binaries).
This patch converts many existing functions to use the weak alias
pattern, as preparation for subsequent conversions to common macros.
I do expect that _FloatN/_FloatNx function aliases will end up needing
new variants of the common macros that do *not* create the original
float / double / long double name of a function - for cases where that
name is created specially to give it a particular symbol version, for
example - but for functions that can use the most common macros to
create all the public names as aliases, it makes sense for them to do
so.
Regarding the Bessel function wrappers in this patch: only float and
double wrappers are changed because the long double wrappers already
used the weak alias pattern.
Tested for x86_64, and with build-many-glibcs.py.
* include/math.h (roundeven): Change hidden_proto call to
__roundeven.
* math/w_j0_compat.c (j0): Rename to __j0 and define as weak
alias.
[NO_LONG_DOUBLE] (__j0l): New strong alias.
(y0): Rename to __y0 and define as weak alias.
[NO_LONG_DOUBLE] (__y0l): New strong alias.
* math/w_j0f_compat.c (j0f): Rename to __j0f and define as weak
alias.
(y0f): Rename to __y0f and define as weak alias.
* math/w_j1_compat.c (j1): Rename to __j1 and define as weak
alias.
[NO_LONG_DOUBLE] (__j1l): New strong alias.
(y1): Rename to __y1 and define as weak alias.
[NO_LONG_DOUBLE] (__y1l): New strong alias.
* math/w_j1f_compat.c (j1f): Rename to __j1f and define as weak
alias.
(y1f): Rename to __y1f and define as weak alias.
* math/w_jn_compat.c (jn): Rename to __jn and define as weak
alias.
[NO_LONG_DOUBLE] (__jnl): New strong alias.
(yn): Rename to __yn and define as weak alias.
[NO_LONG_DOUBLE] (__ynl): New strong alias.
* math/w_jnf_compat.c (jnf): Rename to __jnf and define as weak
alias.
(ynf): Rename to __ynf and define as weak alias.
* sysdeps/ieee754/dbl-64/s_fromfp.c (FUNC): Define to __fromfp.
(fromfp): Define as weak alias.
[NO_LONG_DOUBLE] (__fromfpl): New strong alias.
* sysdeps/ieee754/dbl-64/s_fromfpx.c (FUNC): Define to __fromfpx.
(fromfpx): Define as weak alias.
[NO_LONG_DOUBLE] (__fromfpxl): New strong alias.
* sysdeps/ieee754/dbl-64/s_getpayload.c (getpayload): Rename to
__getpayload and define as weak alias.
[NO_LONG_DOUBLE] (__getpayloadl): New strong alias.
* sysdeps/ieee754/dbl-64/s_roundeven.c (roundeven): Rename to
__roundeven and define as weak alias.
[NO_LONG_DOUBLE] (__roundevenl): New strong alias.
* sysdeps/ieee754/dbl-64/s_setpayload.c (FUNC): Define to
__setpayload.
(setpayload): Define as weak alias.
[NO_LONG_DOUBLE] (__setpayloadl): New strong alias.
* sysdeps/ieee754/dbl-64/s_setpayloadsig.c (FUNC): Define to
__setpayloadsig.
(setpayloadsig): Define as weak alias.
[NO_LONG_DOUBLE] (__setpayloadsigl): New strong alias.
* sysdeps/ieee754/dbl-64/s_totalorder.c (totalorder): Rename to
__totalorder and define as weak alias.
[NO_LONG_DOUBLE] (__totalorderl): New strong alias.
* sysdeps/ieee754/dbl-64/s_totalordermag.c (totalordermag): Rename
to __totalordermag and define as weak alias.
[NO_LONG_DOUBLE] (__totalordermagl): New strong alias.
* sysdeps/ieee754/dbl-64/s_ufromfp.c (FUNC): Define to __ufromfp.
(ufromfp): Define as weak alias.
[NO_LONG_DOUBLE] (__ufromfpl): New strong alias.
* sysdeps/ieee754/dbl-64/s_ufromfpx.c (FUNC): Define to
__ufromfpx.
(ufromfpx): Define as weak alias.
[NO_LONG_DOUBLE] (__ufromfpxl): New strong alias.
* sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c (getpayload):
Rename to __getpayload and define as weak alias.
[NO_LONG_DOUBLE] (__getpayloadl): New strong alias.
* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c (roundeven):
Rename to __roundeven and define as weak alias.
[NO_LONG_DOUBLE] (__roundevenl): New strong alias.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c (totalorder):
Rename to __totalorder and define as weak alias.
[NO_LONG_DOUBLE] (__totalorderl): New strong alias.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c
(totalordermag): Rename to __totalordermag and define as weak
alias.
[NO_LONG_DOUBLE] (__totalordermagl): New strong alias.
* sysdeps/ieee754/float128/float128_private.h (__getpayloadl): New
macro.
(__roundevenl): Likewise.
(__totalorderl): Likewise.
(__totalordermagl): Likewise
* sysdeps/ieee754/float128/s_fromfpf128.c (FUNC): Define to
__fromfpf128.
(fromfpf128): Define as weak alias.
* sysdeps/ieee754/float128/s_fromfpxf128.c (FUNC): Define to
__fromfpxf128.
(fromfpxf128): Define as weak alias.
* sysdeps/ieee754/float128/s_setpayloadf128.c (FUNC): Define to
__setpayloadf128.
(setpayloadf128): Define as weak alias.
* sysdeps/ieee754/float128/s_setpayloadsigf128.c (FUNC): Define to
__setpayloadsigf128.
(setpayloadsigf128): Define as weak alias.
* sysdeps/ieee754/float128/s_ufromfpf128.c (FUNC): Define to
__ufromfpf128.
(ufromfpf128): Define as weak alias.
* sysdeps/ieee754/float128/s_ufromfpxf128.c (FUNC): Define to
__ufromfpxf128.
(ufromfpxf128): Define as weak alias.
* sysdeps/ieee754/flt-32/s_fromfpf.c (FUNC): Define to __fromfpf.
(fromfpf): Define as weak alias.
* sysdeps/ieee754/flt-32/s_fromfpxf.c (FUNC): Define to
__fromfpxf.
(fromfpxf): Define as weak alias.
* sysdeps/ieee754/flt-32/s_getpayloadf.c (getpayloadf): Rename to
__getpayloadf and define as weak alias.
* sysdeps/ieee754/flt-32/s_roundevenf.c (roundevenf): Rename to
__roundevenf and define as weak alias.
* sysdeps/ieee754/flt-32/s_setpayloadf.c (FUNC): Define to
__setpayloadf.
(setpayloadf): Define as weak alias.
* sysdeps/ieee754/flt-32/s_setpayloadsigf.c (FUNC): Define to
__setpayloadsigf.
(setpayloadsigf): Define as weak alias.
* sysdeps/ieee754/flt-32/s_totalorderf.c (totalorderf): Rename to
__totalorderf and define as weak alias.
* sysdeps/ieee754/flt-32/s_totalordermagf.c (totalordermagf):
Rename to __totalordermagf and define as weak alias.
* sysdeps/ieee754/flt-32/s_ufromfpf.c (FUNC): Define to
__ufromfpf.
(ufromfpf): Define as weak alias.
* sysdeps/ieee754/flt-32/s_ufromfpxf.c (FUNC): Define to
__ufromfpxf.
(ufromfpxf): Define as weak alias.
* sysdeps/ieee754/ldbl-128/s_fromfpl.c (FUNC): Define to
__fromfpl.
(fromfpl): Define as weak alias.
* sysdeps/ieee754/ldbl-128/s_fromfpxl.c (FUNC): Define to
__fromfpxl.
(fromfpxl): Define as weak alias.
* sysdeps/ieee754/ldbl-128/s_getpayloadl.c (getpayloadl): Rename
to __getpayloadl and define as weak alias.
* sysdeps/ieee754/ldbl-128/s_roundevenl.c (roundevenl): Rename to
__roundevenl and define as weak alias.
* sysdeps/ieee754/ldbl-128/s_setpayloadl.c (FUNC): Define to
__setpayloadl.
(setpayloadl): Define as weak alias.
* sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c (FUNC): Define to
__setpayloadsigl.
(setpayloadsigl): Define as weak alias.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c (totalorderl): Rename
to __totalorderl and define as weak alias.
* sysdeps/ieee754/ldbl-128/s_totalordermagl.c (totalordermagl):
Rename to __totalordermagl and define as weak alias.
* sysdeps/ieee754/ldbl-128/s_ufromfpl.c (FUNC): Define to
__ufromfpl.
(ufromfpl): Define as weak alias.
* sysdeps/ieee754/ldbl-128/s_ufromfpxl.c (FUNC): Define to
__ufromfpxl.
(ufromfpxl): Define as weak alias.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c (FUNC): Define to
__fromfpl.
(fromfpl): Define as weak alias.
* sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c (FUNC): Define to
__fromfpxl.
(fromfpxl): Define as weak alias.
* sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c (getpayloadl):
Rename to __getpayloadl and define as weak alias.
* sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c (roundevenl): Rename
to __roundevenl and define as weak alias. Call __roundeven
instead of roundeven.
* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c (FUNC): Define to
__setpayloadl.
(setpayloadl): Define as weak alias.
* sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c (FUNC): Define to
__setpayloadsigl.
(setpayloadsigl): Define as weak alias.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c (totalorderl):
Rename to __totalorderl and define as weak alias.
* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c (totalordermagl):
Rename to __totalordermagl and define as weak alias.
* sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c (FUNC): Define to
__ufromfpl.
(ufromfpl): Define as weak alias.
* sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c (FUNC): Define to
__ufromfpxl.
(ufromfpxl): Define as weak alias.
* sysdeps/ieee754/ldbl-96/s_fromfpl.c (FUNC): Define to
__fromfpl.
(fromfpl): Define as weak alias.
* sysdeps/ieee754/ldbl-96/s_fromfpxl.c (FUNC): Define to
__fromfpxl.
(fromfpxl): Define as weak alias.
* sysdeps/ieee754/ldbl-96/s_getpayloadl.c (getpayloadl): Rename to
__getpayloadl and define as weak alias.
* sysdeps/ieee754/ldbl-96/s_roundevenl.c (roundevenl): Rename to
__roundevenl and define as weak alias.
* sysdeps/ieee754/ldbl-96/s_setpayloadl.c (FUNC): Define to
__setpayloadl.
(setpayloadl): Define as weak alias.
* sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c (FUNC): Define to
__setpayloadsigl.
(setpayloadsigl): Define as weak alias.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c (totalorderl): Rename to
__totalorderl and define as weak alias.
* sysdeps/ieee754/ldbl-96/s_totalordermagl.c (totalordermagl):
Rename to __totalordermagl and define as weak alias.
* sysdeps/ieee754/ldbl-96/s_ufromfpl.c (FUNC): Define to
__ufromfpl.
(ufromfpl): Define as weak alias.
* sysdeps/ieee754/ldbl-96/s_ufromfpxl.c (FUNC): Define to
__ufromfpxl.
(ufromfpxl): Define as weak alias.
Continuing the process of setting up common macros for libm function
aliases, with a view to using them to define _FloatN / _FloatNx
aliases in future, this patch adds a libm_alias_float128 macro and
uses it in the type-generic templates. (_Float128 functions will end
up with _Float64x aliases on powerpc64le, but not on x86_64/x86/ia64
because _Float64x has long double format there, and the macro will
provide a single place for the conditionals for that choice, as well
as for once ldbl-128 functions always build *f128 and need
conditionals for whether to have *l aliases.)
Tested for x86_64. Also tested with build-many-glibcs.py that
installed stripped shared libraries are unchanged by the patch.
* sysdeps/generic/libm-alias-float128.h: New file.
* sysdeps/generic/math-type-macros-float128.h: Include
<libm-alias-float128.h>.
[!declare_mgen_alias] (declare_mgen_alias): Define macro.
Continuing the process of setting up common macros for libm function
aliases, with a view to using them to define _FloatN / _FloatNx
aliases in future, this patch adds a libm_alias_ldouble macro and uses
it in the type-generic templates.
Since math-type-macros-ldouble.h already did the appropriate thing for
each symbol (weak_alias or long_double_symbol), this is just a
straightforward rearrangement of code, to make the required logic
available in a place that can also be used outside of the type-generic
templates in future (in particular, to eliminate various wrappers for
functions in ldbl-opt and ldbl-64-128).
Tested for x86_64. Also tested with build-many-glibcs.py that
installed stripped shared libraries are unchanged by the patch.
* sysdeps/generic/libm-alias-ldouble.h: New file.
* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Likewise.
* sysdeps/ieee754/ldbl-opt/math-type-macros-ldouble.h: Remove.
* sysdeps/generic/math-type-macros-ldouble.h: Include
<libm-alias-ldouble.h>.
[!declare_mgen_alias] (declare_mgen_alias): Define to use
libm_alias_ldouble.
This patch cleans up how compat symbols / long double versioning are
handled for log1p, ldexp, scalbn and scalbln functions.
The general principle is to do as much as possible through the
type-generic templates. Previously, when errno-setting wrappers were
added the compat long double symbols were left pointing directly to
the underlying implementations; they are moved to point to the
errno-setting wrappers. For the functions also present in libc,
compat symbol handling for the libc copies needs to go in ldbl-opt
wrappers, but the type-generic templates can handle it for the libm
copies. There is no need for w_scalbln_template.c to disable the
creation of an unused internal alias (such code made sense in the
context of patches trying to avoid any changes to generated code for
ease of comparison, but can be removed in a change that specifically
does intend to change details of where symbols point).
Tested for x86_64, and with build-many-glibcs.py.
* math/w_scalbln_template.c (strong_alias): Do not undefine and
redefine.
* sysdeps/ieee754/ldbl-opt/s_ldexp.c (declare_mgen_alias): Remove
macro.
(ldexpl): Only define as compat symbol for libc, not libm.
(scalbnl): Define as compat symbol for libc here.
* sysdeps/ieee754/ldbl-opt/s_ldexpl.c (declare_mgen_alias): Only
define for [IS_IN (libc)].
(__ldexpl_2): Remove alias.
(ldexpl): Only define with long_double_symbol if [IS_IN (libc)].
(scalbnl): Likewise. Use __wrap_scalbnl not __ldexpl_2 as base
name in long_double_symbol call.
* sysdeps/ieee754/ldbl-opt/s_log1p.c: Remove file.
* sysdeps/ieee754/ldbl-opt/s_scalbln.c: Likewise.
* sysdeps/ieee754/ldbl-opt/s_scalbn.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_log1p.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_scalbln.c (declare_mgen_alias):
Remove macro.
[IS_IN (libc) && LONG_DOUBLE_COMPAT (libc, GLIBC_2_1)] (scalblnl):
Define as compat symbol.
This patch fixes the compat glob implementation consolidation from
commit 116f1c64d with the following changes:
- Add a compat implementation on s390 to avoid the architecture
to build the symbols on default linux oldglob.c by setting
GLOB_NO_OLD_VERSION.
- Remove the duplicate rule to build oldglob on alpha.
Checked on s390-linux-gnu and alpha-linux-gnu using build-many-glibc.py.
* sysdeps/unix/sysv/linux/s390/s390-32/oldglob.c: New file.
* sysdeps/unix/sysv/linux/alpha/Makefile
[$(subdir) = csu] (sysdep_routines): Remove rule.
Continuing the process of setting up common macros for libm function
aliases, with a view to using them to define _FloatN / _FloatNx
aliases in future, this patch adds a libm_alias_double macro and uses
it in the type-generic templates.
This macro handles defining aliases for double, and for long double in
the NO_LONG_DOUBLE case. It also handles defining compat symbols for
long double = double for architectures that changed their long double
format. By so doing, it eliminates the need for the
M_LIBM_NEED_COMPAT and declare_mgen_libm_compat macros; the single
declare_mgen_alias call in each template now suffices to define all
required compat symbols. When used for more double functions (not
based on type-generic templates), I expect it will eliminate the need
for most ldbl-opt wrappers for such functions.
A few special cases are needed. __clog10l is a public symbol (for
historical reasons) so needs to be given appropriate compat versions
for architectures that changed their long double format, but is not
defined as an alias using the normal macros since __clog10* are *not*
public symbols for _FloatN / _FloatNx types. For scalbn, scalbln and
log1p, the changes adding errno setting support for those functions
left compat symbols pointing directly to the non-errno-setting
implementations. There is no requirement for the compat symbols not
to set errno; that just made for the simplest patches at that time.
Now, with these common macros, it's natural to redirect the compat
symbols to the errno-setting wrappers, which I intend to do in a
separate patch.
Tested for x86_64, and with build-many-glibcs.py. For ldbl-opt
platforms the stripped libm.so binaries are changed (disassembly
unchanged) because the details of how the clog10l compat symbol is
created mean it ceases to be weak as it was before; for other
platforms, stripped libm.so binaries are unchanged.
2017-09-13 Joseph Myers <joseph@codesourcery.com>
* sysdeps/generic/libm-alias-double.h: New file.
* sysdeps/ieee754/ldbl-opt/libm-alias-double.h: Likewise.
* sysdeps/generic/math-type-macros-double.h: Include
<libm-alias-double.h>.
[declare_mgen_alias] (declare_mgen_alias): Define to use
libm_alias_double.
* sysdeps/generic/math-type-macros.h [!M_LIBM_NEED_COMPAT]
(M_LIBM_NEED_COMPAT): Remove macro.
[!M_LIBM_NEED_COMPAT] (declare_mgen_libm_compat): Likewise.
* sysdeps/ieee754/ldbl-opt/math-type-macros-double.h: Remove.
* math/cabs_template.c [M_LIBM_NEED_COMPAT]: Remove conditional
code.
* math/carg_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/cimag_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/conj_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/creal_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_cacos_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_cacosh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_casin_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_casinh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_catan_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_catanh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_ccos_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_ccosh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_cexp_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_clog10_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_clog_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_cpow_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_cproj_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_csin_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_csinh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_csqrt_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_ctan_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_ctanh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_fdim_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_fmax_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_fmin_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_nan_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/w_ilogb_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* sysdeps/ieee754/ldbl-opt/s_clog10.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ldexp.c (M_LIBM_NEED_COMPAT): Remove
macro.
(declare_mgen_alias): New macro.
* sysdeps/ieee754/ldbl-opt/w_log1p.c: New file.
* sysdeps/ieee754/ldbl-opt/w_scalbln.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.c
(M_LIBM_NEED_COMPAT): Remove macro.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c
[HAVE_AS_VIS3_SUPPORT]: Include <math_ldbl_opt.h> and
<first-versions.h>.
[HAVE_AS_VIS3_SUPPORT && LONG_DOUBLE_COMPAT (libm,
FIRST_VERSION_libm_fdiml)]: Define fdiml as compat symbol.
The libm template machinery includes a macro declare_mgen_alias_2, to
define two function aliases rather than one. This macro is only used
in one place, to define ldexp and scalbn, and only has one nondefault
definition, for double in the case where long double has the same
format. That definition is because declare_mgen_alias for double, in
that case, defines <internal-func>l as an alias of <internal-func>, so
cannot be called twice for aliases of the same function.
Now, I suspect the <internal-func>l aliases are generally not needed
(with maybe a few exceptions such as __clog10l, which is an exported
function). But even in the presence of them, there is no need for a
special declare_mgen_alias_2 macro for this case. This patch
eliminates the need for such a macro by defining __wrap_scalbn<suffix>
as an alias of __ldexp<suffix>, and then using that when defining the
scalbn public aliases. This is similar to how such internal aliases
are created for functions with multiple symbol versions, for example.
Tested for x86_64, and with build-many-glibcs.py. (There *are* some
cases where installed stripped shared libraries change - not in the
generated code but because such changes to static symbols on input to
ld, even nonexported symbols that don't affect the code or dynamic
symbols, can affect the particular representation in the output of
string tables, hash tables etc.)
* sysdeps/generic/math-type-macros.h [!declare_mgen_alias_2]
(declare_mgen_alias_2): Remove.
* sysdeps/generic/math-type-macros-double.h
[NO_LONG_DOUBLE && !declare_mgen_alias_2] (declare_mgen_alias_2):
Likewise.
* math/s_ldexp_template.c (M_SUF (__wrap_scalbn)): Define strong
alias.
(ldexp): Define with declare_mgen_alias.
(scalbn): Likewise.
AVX512 functions in mathvec are used on machines with AVX512. An AVX2
wrapper is also provided and it can be used when the AVX512 version
isn't profitable. MathVec_Prefer_No_AVX512 is addded to cpu-features.
If glibc.tune.hwcaps=MathVec_Prefer_No_AVX512 is set in GLIBC_TUNABLES
environment variable, the AVX2 wrapper will be used.
Tested on x86-64 machines with and without AVX512. Also verified
glibc.tune.hwcaps=MathVec_Prefer_No_AVX512 on AVX512 machine.
[BZ #21967]
* sysdeps/x86/cpu-features.h (bit_arch_MathVec_Prefer_No_AVX512):
New.
(index_arch_MathVec_Prefer_No_AVX512): Likewise.
* sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)):
Handle MathVec_Prefer_No_AVX512.
* sysdeps/x86_64/fpu/multiarch/ifunc-mathvec-avx512.h
(IFUNC_SELECTOR): Return AVX2 version if MathVec_Prefer_No_AVX512
is set.
Fully supporting TS 18661-3 _FloatN / _FloatNx types in the cases
where they have the same format as other supported types (in line with
the principles described at
<https://sourceware.org/ml/libc-alpha/2017-01/msg00333.html>) means
adding a lot of function aliases to libm (and a few to libc). float
functions will have *f32 aliases, double functions will have *f32x and
*f64 aliases, long double functions may have *f64x, *f128 or both
aliases depending on the configuration, float128 functions have have
*f64x aliases depending on the configuration.
At present, most individual libm functions have their own weak_alias
calls to define the public names for those functions. For TS 18661-3
support, it is desirable that functions not all need to duplicate the
logic for which alias names to define.
Thus, common macros for defining the public aliases to a libm function
make sense. In the double and long double cases, such macros will
also help simplify existing code (with LONG_DOUBLE_COMPAT
etc. conditionals), by eliminating existing conditionals and ldbl-opt
/ ldbl-64-128 wrappers (using the generated ldbl-compat-choose.h to
allow a single macro definition to expand appropriately for each
symbol depending on LONG_DOUBLE_COMPAT for that symbol).
This patch starts the process of adding such macros with a
straightforward case: a libm_alias_float macro, initially only used in
the case of type-generic templates, to define aliases for float
functions (currently just the *f public names, in future also *f32).
Future patches are intended to add such macros for other types and to
extend the cases in which they are used, with a view to as many places
as possible using them before support for _FloatN / _FloatNx aliases
is enabled. (I think it's inevitable that some places doing
architecture-specific things with aliases and symbol versioning may
end up needing to replicate logic for the new aliases, but hopefully
the number of such places can be kept to a minimum.)
The libm_alias_float macro takes unsuffixed names for both the
internal and public function names. The need for unsuffixed public
names is obvious, since such macros will end up defining multiple
public names with different suffixes. Unsuffixed internal names are
because I expect the ldbl-128 functions to end up in a form that
always defines *f128 names and sometimes also defines *l names - with
the main internal names being e.g. __ieee754_<func>f128 (so many
macros in float128_private.h can go away). But __ieee754_<func>l
aliases will still be needed for e.g. use from math/ complex
functions, meaning the alias macro needs to see just __ieee754_<func>
as internal name so it can create an alias based on that name. Since
libm_alias_float128 will thus need the unsuffixed internal name, it
seems to make sense for all such macros to receive the unsuffixed
name.
Tested for x86_64. Also tested with build-many-glibcs.py that
installed stripped shared libraries are unchanged by the patch.
* sysdeps/generic/libm-alias-float.h: New file.
* sysdeps/generic/math-type-macros-float.h: Include
<libm-alias-float.h>.
[!declare_mgen_alias] (declare_mgen_alias): Define macro.
Before glibc 2.26, ld.so set dl_platform to "x86_64" and searched the
"x86_64" subdirectory when loading a shared library. ld.so in glibc
2.26 was changed to set dl_platform to "haswell" or "xeon_phi", based
on supported ISAs. This led to shared library loading failure for
shared libraries placed under the "x86_64" subdirectory.
This patch adds "x86_64" to x86-64 dl_hwcap so that ld.so will always
search the "x86_64" subdirectory when loading a shared library.
NB: We can't set x86-64 dl_platform to "x86-64" since ld.so will skip
the "haswell" and "xeon_phi" subdirectories on "haswell" and "xeon_phi"
machines.
Tested on i686 and x86-64.
[BZ #22093]
* sysdeps/x86/cpu-features.c (init_cpu_features): Initialize
GLRO(dl_hwcap) to HWCAP_X86_64 for x86-64.
* sysdeps/x86/dl-hwcap.h (HWCAP_COUNT): Updated.
(HWCAP_IMPORTANT): Likewise.
(HWCAP_X86_64): New enum.
(HWCAP_X86_AVX512_1): Updated.
* sysdeps/x86/dl-procinfo.c (_dl_x86_hwcap_flags): Add "x86_64".
* sysdeps/x86_64/Makefile (tests): Add tst-x86_64-1.
(modules-names): Add x86_64/tst-x86_64mod-1.
(LDFLAGS-tst-x86_64mod-1.so): New.
($(objpfx)tst-x86_64-1): Likewise.
($(objpfx)x86_64/tst-x86_64mod-1.os): Likewise.
(tst-x86_64-1-clean): Likewise.
* sysdeps/x86_64/tst-x86_64-1.c: New file.
* sysdeps/x86_64/tst-x86_64mod-1.c: Likewise.
* manual/tunables.texi (glibc.tune.cpu): Add thunderx2t99 and
thunderx2t99p1 to list of cpu names.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list):
Add thunderx2t99 and thunderx2t99p1 entries to cpu_list.
While reviewing Linux 4.13 for glibc header changes needed, I noticed
that bits/fcntl-linux.h was missing F_ADD_SEALS etc. from Linux 3.17.
I didn't find any discussion indicating this omission is deliberate.
Now, these interfaces can only be used with file descriptors created
with memfd_create, and we don't have a memfd_create wrapper in glibc
(a patch was submitted in October 2014, albeit without documentation /
tests, and discussions continued over the next few months, but without
consensus on whether to add the interface - and we still lack any
general consensus on syscall wrappers), but I don't think that's a
reason to exclude the constants from bits/fcntl-linux.h (especially as
the header does not look compatible with simultaneously including
linux/fcntl.h).
(Some of those 2014/2015 discussions raised concerns about difficulty
using the memfd_create / sealing interface, but those seem to me more
like a question of whether it should be part of the OS-independent GNU
API - in my view, even fairly specialized syscalls ought to have
wrappers added to glibc if not obsolescent, but there may be cases
where we only want to include them in the Linux-specific API and
anything in the OS-independent GNU API should be different - rather
than being relevant to whether constants for use with fcntl should
appear in headers.)
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_GNU]
(F_ADD_SEALS): New macro.
[__USE_GNU] (F_GET_SEALS): Likewise.
[__USE_GNU] (F_SEAL_SEAL): Likewise.
[__USE_GNU] (F_SEAL_SHRINK): Likewise.
[__USE_GNU] (F_SEAL_GROW): Likewise.
[__USE_GNU] (F_SEAL_WRITE): Likewise.
This patch consolidates the glob implementation. The main changes are:
* On Linux all implementation now uses the default one at
sysdeps/unix/sysv/linux/glob{free}{64}.c with the exception
of alpha (which requires specific versioning) and s390-32 (which
different than other 32 bits ports it does not add a compat one
symbol for 2.1 version).
* The default implementation uses XSTAT_IS_XSTAT64 to define whether
both glob{free} and glob{free}64 should be different implementations.
For archictures that define XSTAT_IS_XSTAT64, glob{free} is an alias
to glob{free}64.
* Move i386 olddirent.h header to Linux default directory, since it is
the only header with this name and it is shared among different
architectures (and used on compat glob symbol as well).
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
* sysdeps/unix/sysv/linux/arm/glob64.c: Remove file.
* sysdeps/unix/sysv/linux/i386/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/glob.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/globfree.c: Likewise.
* sysdeps/wordsize-64/glob.c: Likewise.
* sysdeps/wordsize-64/glob64.c: Likewise.
* sysdeps/wordsize-64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/glob.c: New file.
* sysdeps/unix/sysv/linux/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/globfree.c: Likewise.
* sysdeps/unix/sysv/linux/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/glob64.c: Likewise.
* sysdeps/unix/sysv/linux/oldglob.c [SHLIB_COMPAT]: Also
adds !GLOB_NO_OLD_VERSION as an extra condition.
* sysdeps/unix/sysv/linux/i386/alphasort64.c: Include olddirent.h
using relative path instead of absolute one.
* sysdeps/unix/sysv/linux/i386/getdents64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/readdir64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/readdir64_r.c: Likewise.
* sysdeps/unix/sysv/linux/i386/versionsort64.c: Likewise.
* sysdeps/unix/sysv/linux/i386/olddirent.h: Move to ...
* sysdeps/unix/sysv/linux//olddirent.h: ... here.
This patch syncs posix/glob.c implementation with gnulib version
b5ec983 (glob: simplify symlink detection). The only difference
to gnulib code is
* DT_UNKNOWN, DT_DIR, and DT_LNK definition in the case there
were not already defined. Gnulib code which uses
HAVE_STRUCT_DIRENT_D_TYPE will redefine them wrongly because
GLIBC does not define HAVE_STRUCT_DIRENT_D_TYPE. Instead
the patch check for each definition instead.
Also, the patch requires additional globfree and globfree64 files
for compatibility version on some architectures. Also the code
simplification leads to not macro simplification (not need for
NO_GLOB_PATTERN_P anymore).
Checked on x86_64-linux-gnu and on a build using build-many-glibcs.py
for all major architectures.
[BZ #1062]
* posix/Makefile (routines): Add globfree, globfree64, and
glob_pattern_p.
* posix/flexmember.h: New file.
* posix/glob_internal.h: Likewise.
* posix/glob_pattern_p.c: Likewise.
* posix/globfree.c: Likewise.
* posix/globfree64.c: Likewise.
* sysdeps/gnu/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/alpha/globfree.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/oldglob.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/globfree64.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/globfree.c: Likewise.
* sysdeps/wordsize-64/globfree.c: Likewise.
* sysdeps/wordsize-64/globfree64.c: Likewise.
* posix/glob.c (HAVE_CONFIG_H): Use !_LIBC instead.
[NDEBUG): Remove comments.
(GLOB_ONLY_P, _AMIGA, VMS): Remove define.
(dirent_type): New type. Use uint_fast8_t not
uint8_t, as C99 does not require uint8_t.
(DT_UNKNOWN, DT_DIR, DT_LNK): New macros.
(struct readdir_result): Use dirent_type. Do not define skip_entry
unless it is needed; this saves a byte on platforms lacking d_ino.
(readdir_result_type, readdir_result_skip_entry):
New functions, replacing ...
(readdir_result_might_be_symlink, readdir_result_might_be_dir):
these functions, which were removed. This makes the callers
easier to read. All callers changed.
(D_INO_TO_RESULT): Now empty if there is no d_ino.
(size_add_wrapv, glob_use_alloca): New static functions.
(glob, glob_in_dir): Check for size_t overflow in several places,
and fix some size_t checks that were not quite right.
Remove old code using SHELL since Bash no longer
uses this.
(glob, prefix_array): Separate MS code better.
(glob_in_dir): Remove old Amiga and VMS code.
(globfree, __glob_pattern_type, __glob_pattern_p): Move to
separate files.
(glob_in_dir): Do not rely on undefined behavior in accessing
struct members beyond their bounds. Use a flexible array member
instead
(link_stat): Rename from link_exists2_p and return -1/0 instead of
0/1. Caller changed.
(glob): Fix memory leaks.
* posix/glob64 (globfree64): Move to separate file.
* sysdeps/gnu/glob64.c (NO_GLOB_PATTERN_P): Remove define.
(globfree64): Remove hidden alias.
* sysdeps/unix/sysv/linux/Makefile (sysdeps_routines): Add
oldglob.
* sysdeps/unix/sysv/linux/alpha/glob.c (__new_globfree): Move to
separate file.
* sysdeps/unix/sysv/linux/i386/glob64.c (NO_GLOB_PATTERN_P): Remove
define.
Move compat code to separate file.
* sysdeps/wordsize-64/glob.c (globfree): Move definitions to
separate file.
This patch updates sysdeps/gnu/netinet/tcp.h to include new
definitions from include/uapi/linux/tcp.h in Linux 4.13.
Tested for x86_64.
* sysdeps/gnu/netinet/tcp.h (TCP_ULP): New macro.
(TCP_MD5SIG_EXT): Likewise.
(TCP_MD5SIG_FLAG_PREFIX): Likewise.
(struct tcp_md5sig): Replace __tcpm_pad1 by tcpm_flags and
tcpm_prefixlen. Rename __tcpm_pad2 to __tcpm_pad.
This patch adds the new SOL_TLS constant from Linux 4.13 to the Linux
bits/socket.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/socket.h (SOL_TLS): New macro.
The initial obsoletion of SVID libm error handling left the old
wrappers and __kernel_standard still being used for new ports and
static linking, just with macro definitions of _LIB_VERSION and
matherr that meant symbols with those names were never actually used
and the code for different error handling variants could be optimized
out.
This patch cleans things up further by eliminating the
__kernel_standard use for new ports and static linking. Now, the old
wrappers no longer generate any code in the !LIBM_SVID_COMPAT case,
while the new errno-only wrappers that were added for float128 support
are now also used for float, double and long double in that case.
The changes are generally straightforward. The w_scalb*_compat
wrappers continue to be used (scalb is obsolescent in the sense of not
being supported for float128, but is present in supported standards -
the 2001 edition of POSIX and earlier XSI versions - so remains
supported for static linking and new ports, as do the float and long
double variants that are existing GNU extensions). Those wrappers
would only call __kernel_standard in the _LIB_VERSION == _SVID_ case.
Since we would like to be able to compile most of glibc without
optimization, relying on a static function whose only use is under an
if (0) condition being optimized away to avoid an undefined
__kernel_standard reference may not be a good idea. Thus, the
relevant code in the scalb wrappers has LIBM_SVID_COMPAT conditionals
added to guarantee it's not built at all in the case where
__kernel_standard does not exist.
Just as i386 has its own w_sqrt_compat.c, so w_sqrt.c is also added.
ia64 gets dummy w_*.c to prevent those files being built where they
would conflict with the ia64 libm, as with its existing w_*_compat.c.
Conditions disabling code for !LIBM_SVID_COMPAT are needed in both the
math/ wrappers and in the long double wrappers in ldbl-opt (to avoid
them setting up aliases and symbol versions for undefined symbols). I
hope that future cleanups to how libm function aliases and symbol
versioning are done will eliminate the need for most of the ldbl-opt
wrappers.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* sysdeps/generic/math-type-macros-double.h: Include
<math-svid-compat.h>.
(__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT.
* sysdeps/generic/math-type-macros-float.h: Include
<math-svid-compat.h>.
(__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT.
* sysdeps/generic/math-type-macros-ldouble.h: Include
<math-svid-compat.h>.
(__USE_WRAPPER_TEMPLATE): Define to !LIBM_SVID_COMPAT.
* math/lgamma-compat.h (BUILD_LGAMMA): Include LIBM_SVID_COMPAT
condition.
* math/w_acos_compat.c: Condition contents on [LIBM_SVID_COMPAT].
* math/w_acosf_compat.c: Likewise.
* math/w_acosh_compat.c: Likewise.
* math/w_acoshf_compat.c: Likewise.
* math/w_acoshl_compat.c: Likewise.
* math/w_acosl_compat.c: Likewise.
* math/w_asin_compat.c: Likewise.
* math/w_asinf_compat.c: Likewise.
* math/w_asinl_compat.c: Likewise.
* math/w_atan2_compat.c: Likewise.
* math/w_atan2f_compat.c: Likewise.
* math/w_atan2l_compat.c: Likewise.
* math/w_atanh_compat.c: Likewise.
* math/w_atanhf_compat.c: Likewise.
* math/w_atanhl_compat.c: Likewise.
* math/w_cosh_compat.c: Likewise.
* math/w_coshf_compat.c: Likewise.
* math/w_coshl_compat.c: Likewise.
* math/w_exp10_compat.c: Likewise.
* math/w_exp10f_compat.c: Likewise.
* math/w_exp10l_compat.c: Likewise.
* math/w_exp2_compat.c: Likewise.
* math/w_exp2f_compat.c: Likewise.
* math/w_exp2l_compat.c: Likewise.
* math/w_fmod_compat.c: Likewise.
* math/w_fmodf_compat.c: Likewise.
* math/w_fmodl_compat.c: Likewise.
* math/w_hypot_compat.c: Likewise.
* math/w_hypotf_compat.c: Likewise.
* math/w_hypotl_compat.c: Likewise.
* math/w_j0_compat.c: Likewise.
* math/w_j0f_compat.c: Likewise.
* math/w_j0l_compat.c: Likewise.
* math/w_j1_compat.c: Likewise.
* math/w_j1f_compat.c: Likewise.
* math/w_j1l_compat.c: Likewise.
* math/w_jn_compat.c: Likewise.
* math/w_jnf_compat.c: Likewise.
* math/w_jnl_compat.c: Likewise.
* math/w_lgamma_r_compat.c: Likewise.
* math/w_lgammaf_r_compat.c: Likewise.
* math/w_lgammal_r_compat.c: Likewise.
* math/w_log10_compat.c: Likewise.
* math/w_log10f_compat.c: Likewise.
* math/w_log10l_compat.c: Likewise.
* math/w_log2_compat.c: Likewise.
* math/w_log2f_compat.c: Likewise.
* math/w_log2l_compat.c: Likewise.
* math/w_log_compat.c: Likewise.
* math/w_logf_compat.c: Likewise.
* math/w_logl_compat.c: Likewise.
* math/w_pow_compat.c: Likewise.
* math/w_powf_compat.c: Likewise.
* math/w_powl_compat.c: Likewise.
* math/w_remainder_compat.c: Likewise.
* math/w_remainderf_compat.c: Likewise.
* math/w_remainderl_compat.c: Likewise.
* math/w_sinh_compat.c: Likewise.
* math/w_sinhf_compat.c: Likewise.
* math/w_sinhl_compat.c: Likewise.
* math/w_sqrt_compat.c: Likewise.
* math/w_sqrtf_compat.c: Likewise.
* math/w_sqrtl_compat.c: Likewise.
* math/w_tgamma_compat.c: Likewise.
* math/w_tgammaf_compat.c: Likewise.
* math/w_tgammal_compat.c: Likewise.
* math/w_scalb_compat.c (sysv_scalb): Condition definition on
[LIBM_SVID_COMPAT].
(__scalb): Condition call to sysv_scalb on [LIBM_SVID_COMPAT].
* math/w_scalbf_compat.c (sysv_scalbf): Condition definition on
[LIBM_SVID_COMPAT].
(__scalbf): Condition call to sysv_scalbf on [LIBM_SVID_COMPAT].
* math/w_scalbl_compat.c (sysv_scalbl): Condition definition on
[LIBM_SVID_COMPAT].
(__scalbl): Condition call to sysv_scalbl on [LIBM_SVID_COMPAT].
* sysdeps/i386/fpu/w_sqrt.c: New file.
* sysdeps/ia64/fpu/w_acos.c: Likewise.
* sysdeps/ia64/fpu/w_acosf.c: Likewise.
* sysdeps/ia64/fpu/w_acosh.c: Likewise.
* sysdeps/ia64/fpu/w_acoshf.c: Likewise.
* sysdeps/ia64/fpu/w_acoshl.c: Likewise.
* sysdeps/ia64/fpu/w_acosl.c: Likewise.
* sysdeps/ia64/fpu/w_asin.c: Likewise.
* sysdeps/ia64/fpu/w_asinf.c: Likewise.
* sysdeps/ia64/fpu/w_asinl.c: Likewise.
* sysdeps/ia64/fpu/w_atan2.c: Likewise.
* sysdeps/ia64/fpu/w_atan2f.c: Likewise.
* sysdeps/ia64/fpu/w_atan2l.c: Likewise.
* sysdeps/ia64/fpu/w_atanh.c: Likewise.
* sysdeps/ia64/fpu/w_atanhf.c: Likewise.
* sysdeps/ia64/fpu/w_atanhl.c: Likewise.
* sysdeps/ia64/fpu/w_cosh.c: Likewise.
* sysdeps/ia64/fpu/w_coshf.c: Likewise.
* sysdeps/ia64/fpu/w_coshl.c: Likewise.
* sysdeps/ia64/fpu/w_exp.c: Likewise.
* sysdeps/ia64/fpu/w_exp10.c: Likewise.
* sysdeps/ia64/fpu/w_exp10f.c: Likewise.
* sysdeps/ia64/fpu/w_exp10l.c: Likewise.
* sysdeps/ia64/fpu/w_exp2.c: Likewise.
* sysdeps/ia64/fpu/w_exp2f.c: Likewise.
* sysdeps/ia64/fpu/w_exp2l.c: Likewise.
* sysdeps/ia64/fpu/w_expf.c: Likewise.
* sysdeps/ia64/fpu/w_expl.c: Likewise.
* sysdeps/ia64/fpu/w_fmod.c: Likewise.
* sysdeps/ia64/fpu/w_fmodf.c: Likewise.
* sysdeps/ia64/fpu/w_fmodl.c: Likewise.
* sysdeps/ia64/fpu/w_hypot.c: Likewise.
* sysdeps/ia64/fpu/w_hypotf.c: Likewise.
* sysdeps/ia64/fpu/w_hypotl.c: Likewise.
* sysdeps/ia64/fpu/w_lgamma_r.c: Likewise.
* sysdeps/ia64/fpu/w_lgammaf_r.c: Likewise.
* sysdeps/ia64/fpu/w_lgammal_r.c: Likewise.
* sysdeps/ia64/fpu/w_log.c: Likewise.
* sysdeps/ia64/fpu/w_log10.c: Likewise.
* sysdeps/ia64/fpu/w_log10f.c: Likewise.
* sysdeps/ia64/fpu/w_log10l.c: Likewise.
* sysdeps/ia64/fpu/w_log2.c: Likewise.
* sysdeps/ia64/fpu/w_log2f.c: Likewise.
* sysdeps/ia64/fpu/w_log2l.c: Likewise.
* sysdeps/ia64/fpu/w_logf.c: Likewise.
* sysdeps/ia64/fpu/w_logl.c: Likewise.
* sysdeps/ia64/fpu/w_pow.c: Likewise.
* sysdeps/ia64/fpu/w_powf.c: Likewise.
* sysdeps/ia64/fpu/w_powl.c: Likewise.
* sysdeps/ia64/fpu/w_remainder.c: Likewise.
* sysdeps/ia64/fpu/w_remainderf.c: Likewise.
* sysdeps/ia64/fpu/w_remainderl.c: Likewise.
* sysdeps/ia64/fpu/w_sinh.c: Likewise.
* sysdeps/ia64/fpu/w_sinhf.c: Likewise.
* sysdeps/ia64/fpu/w_sinhl.c: Likewise.
* sysdeps/ia64/fpu/w_sqrt.c: Likewise.
* sysdeps/ia64/fpu/w_sqrtf.c: Likewise.
* sysdeps/ia64/fpu/w_sqrtl.c: Likewise.
* sysdeps/ia64/fpu/w_tgamma.c: Likewise.
* sysdeps/ia64/fpu/w_tgammaf.c: Likewise.
* sysdeps/ia64/fpu/w_tgammal.c: Likewise.
* sysdeps/ieee754/dbl-64/w_exp_compat.c: Condition contents on
[LIBM_SVID_COMPAT].
* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
* sysdeps/ieee754/k_standard.c: Likewise.
* sysdeps/ieee754/k_standardf.c: Likewise.
* sysdeps/ieee754/k_standardl.c: Likewise.
* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-64-128/w_expl_compat.c: Condition
long_double_symbol call on [LIBM_SVID_COMPAT].
* sysdeps/ieee754/ldbl-opt/w_acoshl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_acosl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_asinl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_atan2l_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_atanhl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_coshl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_fmodl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_hypotl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_j0l_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_j1l_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_jnl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_lgammal_r_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_log10l_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_log2l_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_logl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_powl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_remainderl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_sinhl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_sqrtl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_tgammal_compat.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c: Condition
long_double_symbol and compat_symbol calls on [LIBM_SVID_COMPAT].
As far as I can tell Linux 4.13 does not add any new syscalls not
included in syscall-names.list. This patch updates the version number
in that file accordingly.
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 4.13.
* misc/preadv2.c: Include <errno.h>.
* misc/preadv64v2.c: Include <errno.h>.
* misc/pwritev2.c: Include <errno.h>.
* misc/pwritev64v2.c: Include <errno.h>.
* sysdeps/posix/preadv2.c: Include <errno.h>.
* sysdeps/posix/preadv64v2.c: Include <errno.h>.
Fix <unistd.h> inclusion.
* sysdeps/posix/pwritev2.c: Include <errno.h>.
* sysdeps/posix/pwritev64v2.c: Include <errno.h>.
* sysdeps/posix/preadv2.c: Use off_t instead of OFF_T.
* sysdeps/posix/preadv64v2.c: Use off_t instead of OFF_T.
* sysdeps/posix/pwritev2.c: Use off_t instead of OFF_T.
* sysdeps/posix/pwritev64v2.c: Use off_t instead of OFF_T.
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking). The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.
Tested for x86_64, and with build-many-glibcs.py.
* manual/math.texi (pow10): Do not document.
(pow10f): Likewise.
(pow10l): Likewise.
* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
* math/libm-test-exp10.inc (pow10_test): Remove.
(do_test): Do not call pow10.
* math/w_exp10_compat.c (pow10): Make into compat symbol.
[NO_LONG_DOUBLE] (pow10l): Likewise.
* math/w_exp10f_compat.c (pow10f): Likewise.
* math/w_exp10l_compat.c (pow10l): Likewise.
* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
(pow10): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
(pow10f): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
(pow10l): Make into compat symbol.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
pow10.
(CFLAGS-nldbl-pow10.c): Remove variable..
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
Undefine and redefine.
(pow10l): Make into compat symbol.
* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/nios2/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch adds O_TMPFILE support to tmpfile on Linux. This is
similar to the previous suggestion by Andreas Schwab [1] with the
difference the file descriptor creation is parameterized to
compartmentalize Linux only open flags (O_TMPFILE) on sysdeps.
Checked on x86_64-linux-gnu.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Andreas Schwab <schwab@suse.de>
[BZ #21530]
* include/stdio.h (__gen_tempfd): New function.
* stdio-common/Makefile (routines): Add gentempfd.
* stdio-common/gentempfd.c: New file.
* sysdeps/unix/sysv/linux/gentempfd.c: Likewise.
* stdio-common/tmpfile.c (tmpfile): First try to use a system specific
unnamed file first.
[1] https://sourceware.org/ml/libc-alpha/2017-06/msg01293.html
The old code uses errno as the primary indicator for success or
failure. This is wrong because errno is only set for specific
combinations of the status return value and the h_errno variable.
This simplifies the code because it is not necessary to propagate the
temporary h_errno value to the thread-local variable. It also increases
compatibility with NSS modules which update only one of the two places.
* sysdeps/aarch64/fpu/s_llrint.c (OREG_SIZE): New macro.
* sysdeps/aarch64/fpu/s_llround.c (OREG_SIZE): Likewise.
* sysdeps/aarch64/fpu/s_llrintf.c (OREGS, IREGS): Remove.
(IREG_SIZE, OREG_SIZE): New macros.
* sysdeps/aarch64/fpu/s_llroundf.c: (OREGS, IREGS): Remove.
(IREG_SIZE, OREG_SIZE): New macros.
* sysdeps/aarch64/fpu/s_lrintf.c (IREGS): Remove.
(IREG_SIZE): New macro.
* sysdeps/aarch64/fpu/s_lroundf.c (IREGS): Remove.
(IREG_SIZE): New macro.
* sysdeps/aarch64/fpu/s_lrint.c (get-rounding-mode.h, stdint.h):
New includes.
(IREG_SIZE, OREG_SIZE): Initialize if not already set.
(OREGS, IREGS): Set based on IREG_SIZE and OREG_SIZE.
(__CONCATX): Handle exceptions correctly on large values that may
set FE_INVALID.
* sysdeps/aarch64/fpu/s_lround.c (IREG_SIZE, OREG_SIZE):
Initialize if not already set.
(OREGS, IREGS): Set based on IREG_SIZE and OREG_SIZE.
The NO_CANCELLATION macro is used currently on generic headers to
define non cancellable syscalls and on Linux fcntl to implement the non
cancellable variation. Former should be single-handled by not-cancel.h
header and former could be simplified build both cancellable and non
cancellable for default objects and alias the non-cancellable to default
one for rtld ones (since Linux already support cancellation as default).
This patch thus removes the NO_CANCELLATION macro and its usage. The
generic non cancellable fcntl is route to internal fcntl.
Checked on x86_64-linux-gnu and i686-linux-gnu. Also checked with
a build again major ABIs.
* sysdeps/generic/not-cancel.h (NO_CANCELLATION): Remove macro.
* sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/arm/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/hppa/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/i386/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/ia64/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/m68k/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/sysdep-cancel.h
(NO_CANCELLATION): Likewise.
* sysdeps/unix/sysv/linux/mips/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/nios2/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h
(NO_CANCELLATION): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h
(NO_CANCELLATION): Likewise.
* sysdeps/unix/sysv/linux/sh/sysdep-cancel.h (NO_CANCELLATION):
Likewise
* sysdeps/unix/sysv/linux/sparc/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/tile/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h (NO_CANCELLATION):
Likewise.
* sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): Add
hidden prototype.
* sysdeps/unix/sysv/linux/fcntl.c (__fcntl_nocancel): Define only
for !IS_IN (rtld) and remove NO_CANCELLATION usage.
Similar to my patches for HUGE_VAL and INFINITY. this patch eliminates
the bits/nan.h headers. __builtin_nanf ("") is used to define NAN for
GCC 3.3 and later; the fallback is (0.0f / 0.0f), which is a constant
expression for a quiet NaN of type float, but raises a spurious
"invalid" exception outside static initializers, which seems the best
that can be done purely in standard C. Again, if anyone actually uses
a compiler with its own incompatible extension for producing a
constant quiet NaN, we can add compiler conditionals.
Tested for x86_64.
* math/math.h [__USE_ISOC99] (NAN): Define directly here. Do not
include <bits/nan.h>.
* math/Makefile (headers): Remove bits/nan.h.
* bits/nan.h: Remove.
* sysdeps/ieee754/bits/nan.h: Likewise.
* sysdeps/mips/bits/nan.h: Likewise.
Similar to my patch for HUGE_VAL, this patch eliminates the bits/inf.h
headers and just unconditionally uses the same definitions as the
sysdeps/ieee754 version did (__builtin_inff () for GCC >= 3.3,
otherwise HUGE_VALF), directly in math.h, so removing an unnecessary
level of indirection.
Tested for x86_64.
* math/math.h [__USE_ISOC99] (INFINITY): Define directly here. Do
not include <bits/inf.h>.
* math/Makefile (headers): Remove bits/inf.h.
* bits/inf.h: Remove.
* sysdeps/ieee754/bits/inf.h: Likewise.
There are various bits/huge_val*.h headers to define HUGE_VAL and
related macros. All of them use __builtin_huge_val etc. for GCC 3.3
and later. Then there are various fallbacks, such as using a large
hex float constant for GCC 2.96 and later, or using unions (with or
without compound literals) to construct the bytes of an infinity, with
this last being the reason for having architecture-specific files.
Supporting TS 18661-3 _FloatN / _FloatNx types that have the same
format as other supported types will mean adding more such macros;
needing to add more headers for them doesn't seem very desirable.
The fallbacks based on bytes of the representation of an infinity do
not meet the standard requirements for a constant expression. At
least one of them is also wrong: sysdeps/sh/bits/huge_val.h is
producing a mixed-endian representation which does not match what GCC
does.
This patch eliminates all those headers, defining the macros directly
in math.h. For GCC 3.3 and later, the built-in functions are used as
now. For other compilers, a large constant 1e10000 (with appropriate
suffix) is used. This is like the fallback for GCC 2.96 and later,
but without using hex floats (which have no apparent advantage here).
It is unambiguously valid standard C for all floating-point formats
with infinities, which covers all formats supported by glibc or likely
to be supported by glibc in future (C90 DR#025 said that if a
floating-point format represents infinities, all real values lie
within the range of representable values, so the constraints for
constant expressions are not violated), but may generate compiler
warnings and wouldn't handle the TS 18661-1 FENV_ROUND pragma
correctly. If someone is actually using a compiler with glibc that
does not claim to be GCC 3.3 or later, but which has a better way to
define the HUGE_VAL macros, we can always add compiler conditionals in
with alternative definitions.
I intend to make similar changes for INF and NAN. The SNAN macros
already just use __builtin_nans etc. with no fallback for compilers
not claiming to be GCC 3.3 or later.
Tested for x86_64.
* math/math.h: Do not include bits/huge_val.h, bits/huge_valf.h,
bits/huge_vall.h or bits/huge_val_flt128.h.
(HUGE_VAL): Define directly here.
[__USE_ISOC99] (HUGE_VALF): Likewise.
[__USE_ISOC99] (HUGE_VALL): Likewise.
[__HAVE_FLOAT128 && __GLIBC_USE (IEC_60559_TYPES_EXT)]
(HUGE_VAL_F128): Likewise.
* math/Makefile (headers): Remove bits/huge_val.h,
bits/huge_valf.h, bits/huge_vall.h and bits/huge_val_flt128.h.
* bits/huge_val.h: Remove.
* bits/huge_val_flt128.h: Likewise.
* bits/huge_valf.h: Likewise.
* bits/huge_vall.h: Likewise.
* sysdeps/ia64/bits/huge_vall.h: Likewise.
* sysdeps/ieee754/bits/huge_val.h: Likewise.
* sysdeps/ieee754/bits/huge_valf.h: Likewise.
* sysdeps/m68k/m680x0/bits/huge_vall.h: Likewise.
* sysdeps/sh/bits/huge_val.h: Likewise.
* sysdeps/sparc/bits/huge_vall.h: Likewise.
* sysdeps/x86/bits/huge_vall.h: Likewise.
This patch completes the ucontext.h namespace fixes by fixing issues
related to the use of struct sigcontext as mcontext_t, and inclusion
of <bits/sigcontext.h> even when struct sigcontext is not so used.
Inclusion of <bits/sigcontext.h> by <sys/ucontext.h> is removed; the
way to get the sigcontext structure is by including <signal.h> (in a
context where __USE_MISC is defined); the sysdeps/generic version of
sys/ucontext.h keeps the inclusion by necessity, with a comment about
how this is not namespace-clean, but the only configuration that used
it, MicroBlaze, gets its own version of the header in this patch.
Where mcontext_t was typedefed to struct sigcontext, the contents of
struct sigcontext are inserted (with appropriate namespace handling to
prefix fields with __ when __USE_MISC is not defined); review should
check that this has been done correctly in each case, whether the
definition of struct sigcontext comes from glibc headers or from the
Linux kernel. This changes C++ name mangling on affected
architectures (which do not include x86_64/x86).
Tested for x86_64, and with build-many-glibcs.py.
2017-08-14 Joseph Myers <joseph@codesourcery.com>
[BZ #21457]
* sysdeps/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>.
* sysdeps/generic/sys/ucontext.h: Add comment about use of struct
sigcontext and namespace requirements.
* sysdeps/i386/sys/ucontext.h: Do not include <bits/sigcontext.h>.
* sysdeps/m68k/sys/ucontext.h: Likewise.
* sysdeps/mips/sys/ucontext.h: Likewise. Include <bits/types.h>.
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/aarch64/ucontext_i.sym (oEXTENSION): Use
__glibc_reserved1 instead of __reserved.
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/alpha/ucontext-offsets.sym: Use
mcontext_t instead of struct sigcontext.
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/ia64/makecontext.c (__makecontext): Use
mcontext_t instead of struct sigcontext.
* sysdeps/unix/sysv/linux/ia64/sigcontext-offsets.sym: Use
mcontext_t instead of struct sigcontext.
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): New macro.
(struct __ia64_fpreg_mcontext): New type.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
(_SC_GR0_OFFSET): Use mcontext_t instead of struct sigcontext.
(uc_sigmask): Define using __ctx.
(uc_stack): Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/microblaze/sys/ucontext.h: New file.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include
<bits/sigcontext.h>. Include <bits/types.h>.
* conform/Makefile (test-xfail-XPG42/signal.h/conform): Remove.
(test-xfail-XPG42/sys/wait.h/conform): Likewise.
(test-xfail-XPG42/ucontext.h/conform): Likewise.
(test-xfail-UNIX98/signal.h/conform): Likewise.
(test-xfail-UNIX98/sys/wait.h/conform): Likewise.
(test-xfail-UNIX98/ucontext.h/conform): Likewise.
(test-xfail-XOPEN2K/signal.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K/ucontext.h/conform): Likewise.
(test-xfail-POSIX2008/signal.h/conform): Likewise.
(test-xfail-POSIX2008/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K8/signal.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise.
As shown by build bot failures
<https://sourceware.org/ml/libc-testresults/2017-q3/msg00349.html> the
m68k bits/mathinline.h is not namespace-clean: it fails to compile if
the user has defined macros f or l before it is included, because of
expansions of those arguments to __inline_functions. This patch
changes the __inline_functions definitions to take not the suffix but
a macro that concatenates it with the function name, to avoid the
spurious macro expansions.
Tested for m68k with build-many-glibcs.py.
[BZ #22035]
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h (__inline_functions):
Define to take a second argument that is a macro that
concatentates a suffix, not the suffix itself.
(__CONCAT_d): New macro.
(__CONCAT_f): Likewise.
(__CONCAT_l): Likewise.
Fix a commit cc25c8b4c1 ("New pthread rwlock that is more scalable.")
regression and prevent uncontrolled stack space usage from happening
when a 5-, 6- or 7-argument syscall wrapper is placed in a loop.
The cause of the problem is the use of `alloca' in regular MIPS/Linux
wrappers to force the use of the frame pointer register in any function
using one or more of these wrappers. Using the frame pointer register
is required so as not to break frame unwinding as the the stack pointer
is lowered within the inline asm used by these wrappers to make room for
the stack arguments, which 5-, 6- and 7-argument syscalls use with the
o32 ABI.
The regular MIPS/Linux wrappers are macros however, expanded inline, and
stack allocations made with `alloca' are not discarded until the return
of the function they are made in. Consequently if called in a loop,
then virtual memory is wasted, and if the loop goes through enough
iterations, then ultimately available memory can get exhausted causing
the program to crash.
Address the issue by replacing the inline code with standalone assembly
functions, which rely on the compiler arranging syscall arguments
according to the o32 function calling convention, which MIPS/Linux
syscalls also use, except for the syscall number passed and the error
flag returned. This way there is no need to fiddle with the stack
pointer anymore and all that has to be handled in the new standalone
functions is the special handling of the syscall number and the error
flag.
Redirect 5-, 6- or 7-argument MIPS16/Linux syscall wrappers to these new
functions as well, so as to avoid an unnecessary double call the
existing wrappers would cause with the new arrangement.
[BZ #21956]
* sysdeps/unix/sysv/linux/mips/mips32/mips16/Makefile
[subdir = misc] (sysdep_routines): Remove `mips16-syscall5',
`mips16-syscall6' and `mips16-syscall7'.
(CFLAGS-mips16-syscall5.c, CFLAGS-mips16-syscall6.c)
(CFLAGS-mips16-syscall7.c): Remove.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/Versions (libc):
Remove `__mips16_syscall5', `__mips16_syscall6' and
`__mips16_syscall7'.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall0.c
(__mips16_syscall0): Rename `__mips16_syscall_return' to
`__mips_syscall_return'.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall1.c
(__mips16_syscall1): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall2.c
(__mips16_syscall2): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall3.c
(__mips16_syscall3): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall4.c
(__mips16_syscall4): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall5.c:
Remove.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall6.c:
Remove.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall7.c:
Remove.
* sysdeps/unix/sysv/linux/mips/mips32/mips16/mips16-syscall.h
(__mips16_syscall5): Expand to `__mips_syscall5' rather than
`__mips16_syscall5'. Remove prototype.
(__mips16_syscall6): Expand to `__mips_syscall6' rather than
`__mips16_syscall6'. Remove prototype.
(__mips16_syscall7): Expand to `__mips_syscall7' rather than
`__mips16_syscall7'. Remove prototype.
(__nomips16, __mips16_syscall_return): Move to...
* sysdeps/unix/sysv/linux/mips/mips32/sysdep.h
(__nomips16, __mips_syscall_return): ... here.
[__mips16] (INTERNAL_SYSCALL_NCS): Rename
`__mips16_syscall_return' to `__mips_syscall_return'.
[__mips16] (INTERNAL_SYSCALL_MIPS16): Pass `number' to
`internal_syscall##nr'.
[!__mips16] (INTERNAL_SYSCALL): Pass `SYS_ify (name)' to
`internal_syscall##nr'.
(FORCE_FRAME_POINTER): Remove.
(__mips_syscall5): New prototype.
(internal_syscall5): Rewrite to call `__mips_syscall5'.
(__mips_syscall6): New prototype.
(internal_syscall6): Rewrite to call `__mips_syscall6'.
(__mips_syscall7): New prototype.
(internal_syscall7): Rewrite to call `__mips_syscall7'.
* sysdeps/unix/sysv/linux/mips/mips32/mips-syscall5.S: New file.
* sysdeps/unix/sysv/linux/mips/mips32/mips-syscall6.S: New file.
* sysdeps/unix/sysv/linux/mips/mips32/mips-syscall7.S: New file.
* sysdeps/unix/sysv/linux/mips/mips32/Makefile [subdir = misc]
(sysdep_routines): Add libc-do-syscall.
* sysdeps/unix/sysv/linux/mips/mips32/Versions (libc): Add
`__mips_syscall5', `__mips_syscall6' and `__mips_syscall7'.
Commit 39e7a5a668 added stdint.h
to sys/procfs.h, but it is included into signal.h by default and
there is code that does not expect stdint.h to be visible there,
so use __uint64_t instead of uint64_t.
When signaling nans are enabled (with -fsignaling-nans), the C++ version
of iszero uses the fpclassify macro, which is defined with __MATH_TG.
However, when support for float128 is available, __MATH_TG uses the
builtin __builtin_types_compatible_p, which is only available in C mode.
This patch refactors the C++ version of iszero so that it uses function
overloading to select between the floating-point types, instead of
relying on fpclassify and __MATH_TG.
Tested for powerpc64le, s390x, x86_64, and with build-many-glibcs.py.
[BZ #21930]
* math/math.h [defined __cplusplus && defined __SUPPORT_SNAN__]
(iszero): New C++ implementation that does not use
fpclassify/__MATH_TG/__builtin_types_compatible_p, when
signaling nans are enabled, since __builtin_types_compatible_p
is a C-only feature.
* math/test-math-iszero.cc: When __HAVE_DISTINCT_FLOAT128 is
defined, include ieee754_float128.h for access to the union and
member ieee854_float128.ieee.
[__HAVE_DISTINCT_FLOAT128] (do_test): Call check_float128.
[__HAVE_DISTINCT_FLOAT128] (check_float128): New function.
* sysdeps/powerpc/powerpc64le/Makefile [subdir == math]
(CXXFLAGS-test-math-iszero.cc): Add -mfloat128 to the build
options of test-math-zero on powerpc64le.
Now there are no more assembly wrappers using _LIB_VERSION or
__kernel_standard, the math-svid-compat code can be slighly
simplified. math-svid-compat.h no longer needs __ASSEMBLER__
conditionals, and the _LIB_VERSION variable no longer needs to be
built for static libm, since all references are now in C code that
includes math-svid-compat.h and so gets the macro definition of
_LIB_VERSION to _POSIX_ outside the compat case. This patch makes
those cleanups.
Tested for x86_64, and with build-many-glibcs.py.
* math/math-svid-compat.h [!__ASSEMBLER__]: Make code
unconditional.
* sysdeps/ieee754/s_lib_version.c [!defined SHARED]: Remove
conditional code; define contents only for [LIBM_SVID_COMPAT].
This commit changes the way the list of SYS_* system call macros is
created on Linux. glibc now contains a list of all known system
calls, and the generated <bits/syscall.h> file defines the SYS_ macro
only if the correspnding __NR_ macro is defined by the kernel headers.
As a result, glibc does not have to be rebuilt to pick up system calls
if the glibc sources already know about them. This means that glibc
can be built with older kernel headers, and if the installed kernel
headers are upgraded afterwards, additional SYS_ macros become
available as long as glibc has a record for those system calls.
Since assembly versions of HAS_CPU_FEATURE and HAS_ARCH_FEATURE have
been removed, assembly versions of index_cpu_* and index_arch_* can
also be removed.
Tested on i686 and x86-64 with and without --disable-multi-arch.
* sysdeps/x86/cpu-features.h [__ASSEMBLER__]
(index_cpu_*, index_arch_*): Removed.
This patch removes the powerpc32-specific wrappers for sqrt and sqrtf.
These wrappers, by adding architecture-specific uses of _LIB_VERSION
and __kernel_standard, unnecessarily complicate cleanups of libm error
handling. They also do not serve a useful optimization purpose. GCC
knows about sqrt as a built-in function, and can generate direct calls
to a hardware square root instruction, either on its own, in the
-fno-math-errno case, or together with an inline check for the
argument being negative and a call to the out-of-line sqrt function
for error handling only in that case (and has been able to do so for a
long time). Thus in practice the wrapper will only be called only in
the case of negative arguments, which is not a case it is useful to
optimize for.
Tested with build-many-glibcs.py for powerpc-linux-gnu-power4.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/w_sqrt_compat-power5.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/w_sqrt_compat-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/w_sqrt_compat.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/w_sqrtf_compat-power5.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/w_sqrtf_compat-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/w_sqrtf_compat.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(libm-sysdep-routines): Remove w_sqrt_compat-power5,
w_sqrt_compat-ppc32, w_sqrtf_compat-power5 and
w_sqrtf_compat-ppc32.
