All the changes are in comments or '#error' messages.
Applying this commit results in bit-identical rebuild of iconvdata/*.so
Reviewed-by: Florian Weimer <fw@deneb.enyo.de>
This "Old POSIX/DKUUG borrowed format" handling is original to the file
and doesn't seem to have ever been used, i.e. id/t-t-c doesn't seem to
have ever been called with argv[1] == POSIX.
Upcoming is a POSIX charmap, which would inadvertently trigger this.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
14 (tags), 15 and 16 (private use), accidentally removed by the
2002-01-16 patch. Replace width table by one which is based on
Unicode but is biased for CJK.
2002-04-15 Bruno Haible <bruno@clisp.org>
* iconvdata/armscii-8.c (BODY for FROM_LOOP): Fix array access.
(BODY for TO_LOOP): Likewise.
* iconvdata/tcvn5712-1.c (from_ucs4): Map U+0309 to 0xB1.
* iconvdata/tst-table.sh: Add support for encodings which contain
precomposed Unicode characters, known to the iconv converter in both
directions but not listed in the charmap.
* iconvdata/IBM856.irreversible: New file.
* iconvdata/IBM922.irreversible: New file.
* iconvdata/IBM1132.irreversible: New file.
* iconvdata/IBM1133.irreversible: New file.
* iconvdata/IBM1160.irreversible: New file.
* iconvdata/IBM1161.irreversible: New file.
* iconvdata/IBM1163.irreversible: New file.
* iconvdata/IBM1164.irreversible: New file.
* iconvdata/ARMSCII-8.irreversible: New file.
* iconvdata/TCVN5712-1.precomposed: New file.
* iconvdata/tst-tables.sh: Add IBM856, IBM922, IBM1124, IBM1129,
IBM1160, IBM1161, IBM1132, IBM1133, IBM1162, IBM1163, IBM1164,
ARMSCII-8, TCVN5712-1.
* iconvdata/Makefile (distribute): Add IBM856.irreversible,
IBM922.irreversible, IBM1132.irreversible, IBM1133.irreversible,
IBM1160.irreversible, IBM1161.irreversible, IBM1163.irreversible,
IBM1164.irreversible, ARMSCII-8.irreversible, TCVN5712-1.precomposed.
2002-04-17 Jakub Jelinek <jakub@redhat.com>
* time/tst-mktime.c: Include <stdlib.h>. Use %d, not %ld format
for EVENING69. Include offsets in TZ environment variable.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
2001-06-04 Bruno Haible <haible@clisp.cons.org>
* iconv/loop.c (UNICODE_TAG_HANDLER): New macro.
* iconv/gconv_simple.c (__gconv_transform_internal_ascii): Invoke
UNICODE_TAG_HANDLER.
(__gconv_transform_internal_ucs2): Likewise.
(__gconv_transform_internal_ucs2reverse): Likewise.
* iconvdata/8bit-gap.c (BODY for TO_LOOP): Invoke UNICODE_TAG_HANDLER.
* iconvdata/8bit-generic.c (BODY for TO_LOOP): Likewise.
* iconvdata/ansi_x3.110.c (BODY for TO_LOOP): Likewise.
* iconvdata/big5.c (BODY for TO_LOOP): Likewise.
* iconvdata/big5hkscs.c (BODY for TO_LOOP): Likewise.
* iconvdata/cp1255.c (BODY for TO_LOOP): Likewise.
* iconvdata/cp1258.c (BODY for TO_LOOP): Likewise.
* iconvdata/euc-cn.c (BODY for TO_LOOP): Likewise.
* iconvdata/euc-jp.c (BODY for TO_LOOP): Likewise.
* iconvdata/euc-kr.c (BODY for TO_LOOP): Likewise.
* iconvdata/euc-tw.c (BODY for TO_LOOP): Likewise.
* iconvdata/gbk.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm930.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm932.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm933.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm935.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm937.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm939.c (BODY for TO_LOOP): Likewise.
* iconvdata/ibm943.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso646.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso8859-1.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso_6937.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso_6937-2.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso-2022-cn.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso-2022-cn-ext.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso-2022-kr.c (BODY for TO_LOOP): Likewise.
* iconvdata/johab.c (BODY for TO_LOOP): Likewise.
* iconvdata/sjis.c (BODY for TO_LOOP): Likewise.
* iconvdata/t.61.c (BODY for TO_LOOP): Likewise.
* iconvdata/uhc.c (BODY for TO_LOOP): Likewise.
* iconvdata/unicode.c (BODY for TO_LOOP): Likewise.
* iconvdata/iso-2022-jp.c (TAG_none, TAG_language, TAG_language_j,
TAG_language_ja, TAG_language_k, TAG_language_ko, TAG_language_z,
TAG_language_zh, CURRENT_TAG_MASK): New enum values.
(EMIT_SHIFT_TO_INIT): Don't emit an escape sequence if ASCII_set
is already selected but set2 or tag are set.
(conversion): New enum type.
(cvlist_t): New type.
(CVLIST, CVLIST_FIRST, CVLIST_REST): New macros.
(conversion_lists): New array.
(BODY for TO_LOOP): Keep track of Unicode 3.1 language tag. If "ja",
prefer conversion to Japanese character sets. If "zh", prefer
conversion to GB2312. If "ko", prefer conversion to KSC5601. Small
optimizations.
(INIT_PARAMS): Add tag.
(UPDATE_PARAMS): Add tag.
2001-06-04 Bruno Haible <haible@clisp.cons.org>
* locale/programs/locfile.c (write_locale_data): Before creat(),
unlink the file, to avoid crashing the processes that mmap it. Change
a double slash to a single slash. Free fname in case of error return.
2001-06-02 Jakub Jelinek <jakub@redhat.com>
* sysdeps/i386/fpu/s_frexpl.S (__frexpl): Mostly revert 2000-12-03
changes, do the special handling for denormal numbers, not for
normalized numbers (patch by <trevin@xmission.com>).
* math/test-misc.c (main): Test frexpl with denormal arguments.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* math/libm-test.inc (llround_test): Add two new llround tests.
* sysdeps/ieee754/ldbl-96/s_llroundl.c (__llroundl): Don't allow
overflow when rounding away from zero.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* math/Makefile (libm-calls): Add e_log2, w_log2, remove s_log2.
* math/math_private.h (__ieee754_log2, __ieee754_log2f,
__ieee754_log2l): New prototypes.
* sysdeps/generic/w_log2.c: New file.
* sysdeps/generic/w_log2f.c: New file.
* sysdeps/generic/w_log2l.c: New file.
* sysdeps/generic/s_log2l.c: Move...
* sysdeps/generic/e_log2l.c: ...to here. Rename to __ieee754_log2l.
* sysdeps/ieee754/k_standard.c (__kernel_standard): Handle log2(0)
and log2(x < 0).
* sysdeps/i386/fpu/s_log2.S: Move...
* sysdeps/i386/fpu/e_log2.S: ...to here. Rename to __ieee754_log2.
* sysdeps/i386/fpu/s_log2f.S: Move...
* sysdeps/i386/fpu/e_log2f.S: ...to here. Rename to __ieee754_log2f.
* sysdeps/i386/fpu/s_log2l.S: Move...
* sysdeps/i386/fpu/e_log2l.S: ...to here. Rename to __ieee754_log2l.
* sysdeps/m68k/fpu/s_log2.S: Move...
* sysdeps/m68k/fpu/e_log2.S: ...to here. Rename to __ieee754_log2.
* sysdeps/m68k/fpu/s_log2f.S: Move...
* sysdeps/m68k/fpu/e_log2f.S: ...to here. Rename to __ieee754_log2f.
* sysdeps/m68k/fpu/s_log2l.S: Move...
* sysdeps/m68k/fpu/e_log2l.S: ...to here. Rename to __ieee754_log2l.
* sysdeps/ieee754/dbl-64/s_log2.c: Move...
* sysdeps/ieee754/dbl-64/e_log2.c: ...to here. Rename to
__ieee754_log2.
* sysdeps/ieee754/flt-32/s_log2f.c: Move...
* sysdeps/ieee754/flt-32/e_log2f.c: ...to here. Rename to
__ieee754_log2f.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* sysdeps/generic/w_exp2.c (u_threshold): Lower threshold so that
even arguments which result in denormalized exp2 are accepted.
(__exp2): Arguments equal to u_threshold already result into
underflow.
* sysdeps/generic/w_exp2f.c (u_threshold, __exp2f): Likewise.
* sysdeps/generic/w_exp2l.c (u_threshold, __exp2l): Likewise.
* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Lomark was too
low, with corrected lowmark use greaterequal, not greater.
* sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* math/libm-test.inc (ilogb_test): Test that ilogb(+-Inf) == INT_MAX.
* sysdeps/i386/fpu/s_ilogb.S (__ilogb): Return INT_MAX for +-Inf.
* sysdeps/i386/fpu/s_ilogbf.S (__ilogbf): Likewise.
* sysdeps/i386/fpu/s_ilogbl.S (__ilogbl): Likewise.
* sysdeps/ieee754/dbl-64/s_ilogb.c (__ilogb): Likewise.
* sysdeps/ieee754/flt-32/s_ilogbf.c (__ilogbf): Likewise.
* sysdeps/ieee754/ldbl-128/s_ilogbl.c (__ilogbl): Likewise.
* sysdeps/ieee754/ldbl-96/s_ilogbl.c (__ilogbl): Likewise.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* sysdeps/generic/w_coshl.c (__coshl): Test if finite argument
gave non-finite result instead of using constant in generic
version.
* sysdeps/generic/w_coshf.c (__coshf): Likewise.
* sysdeps/generic/w_cosh.c (__cosh): Likewise.
* sysdeps/generic/w_exp10.c (o_threshold, u_threshold): Remove.
(__exp10): Test if finite argument gave non-finite result.
* sysdeps/generic/w_exp10f.c (o_threshold, u_threshold, __exp10f):
Likewise.
* sysdeps/generic/w_exp10l.c (o_threshold, u_threshold, __exp10l):
Likewise.
2001-06-04 Jakub Jelinek <jakub@redhat.com>
* sysdeps/ieee754/ldbl-96/e_coshl.c (__ieee754_coshl): Fix
overflow threshold constant (log(LDBL_MAX)+M_LN2l).
2001-05-29 Bruno Haible <haible@clisp.cons.org>
* locale/programs/ld-ctype.c (idx_table): New struct type.
(idx_table_init, idx_table_get, idx_table_add): New functions.
(MAX_CHARNAMES_IDX): Remove macro.
(locale_ctype_t): Change type of charnames_idx field.
(ctype_startup): Change initialization of charnames_idx field.
(find_idx): Use idx_table_get and idx_table_add for speed.
* locale/programs/charmap.c (charmap_new_char): Fix ucs4 value
computation of characters in a range.
2001-05-29 Bruno Haible <haible@clisp.cons.org>
* iconvdata/gb18030.c (__fourbyte_to_ucs1): Add mappings for <U03F4>,
<U03F5>.
(__ucs_to_gb18030_tab1): Likewise.
(BODY for FROM_LOOP): Add mapping for <U00010000>..<U0010FFFF>.
(BODY for TO_LOOP): Likewise.
* iconvdata/tst-table-charmap.sh: Update for charmaps containing
<U00xxxxxx> syntax.
* iconvdata/tst-table-from.c (bmp_only): New variable.
(utf8_decode): If bmp_only, don't return characters outside Unicode
plane 0.
(main): When testing UTF-8 or GB18030, set bmp_only to 1. Don't print
a conversion line if utf8_decode returns NULL.
* iconvdata/tst-table-to.c (main): When testing encodings other than
UTF-8 and GB18030, loop upto U+30000 instead of U+10000. Use UTF-8
instead of UCS-2 as input.
* iconvdata/tst-table.sh: For GB18030, use only the part < 0x10000
of the charmap.
2001-05-29 Bruno Haible <haible@clisp.cons.org>
* iconvdata/cns11643l1.c: Update to Unicode 3.1.
(__cns11643l1_to_ucs4_tab): Regenerated.
(__cns11643l1_from_ucs4_tab12): Regenerated.
* iconvdata/cns11643.c: Update to Unicode 3.1.
(__cns11643l14_to_ucs4_tab): Remove array.
(__cns11643l3_to_ucs4_tab, __cns11643l4_to_ucs4_tab,
__cns11643l5_to_ucs4_tab, __cns11643l6_to_ucs4_tab,
__cns11643l7_to_ucs4_tab, __cns11643l15_to_ucs4_tab): New arrays.
(__cns11643_from_ucs4p0_tab): Renamed from __cns11643_from_ucs4_tab.
(__cns11643_from_ucs4p2_tab): New array.
* iconvdata/cns11643.h (__cns11643l14_to_ucs4_tab): Remove declaration.
(__cns11643l3_to_ucs4_tab, __cns11643l4_to_ucs4_tab,
__cns11643l5_to_ucs4_tab, __cns11643l6_to_ucs4_tab,
__cns11643l7_to_ucs4_tab, __cns11643l15_to_ucs4_tab): New declarations.
(cns11643_to_ucs4): Treat planes 3, 4, 5, 6, 7, 15 instead of 14.
(__cns11643_from_ucs4_tab): Remove declaration.
(__cns11643_from_ucs4p0_tab, __cns11643_from_ucs4p2_tab): New
declarations.
(ucs4_to_cns11643): Update for new arrays. Treat U+3400..U+4DFF and
U+20000..U+2A6D6.
* iconvdata/cns11643l2.h (__cns11643_from_ucs4_tab): Remove
declaration.
(__cns11643_from_ucs4p0_tab): New declaration.
(ucs4_to_cns11643l2): Update for new arrays.
* iconvdata/iso-2022-cn-ext.c (BODY for FROM_LOOP): Handle planes
3 to 7.
(BODY for TO_LOOP): Handle planes 3 to 7, instead of plane 14.
* iconvdata/EUC-TW.irreversible: New file.
* iconvdata/tst-table.sh: Use it.
* iconvdata/Makefile (distribute): Add CP1255.irreversible,
CP1258.irreversible, EUC-TW.irreversible.
2001-05-29 Bruno Haible <haible@clisp.cons.org>
* locale/C-translit.h.in: Add transliterations for new Unicode 3.1
mathematical symbols.
2000-10-15 Pete Wyckoff <pw@osc.edu>
* Rules: Define _LIBC during generation of bits/stdio_lim.d.
2000-10-15 Pete Wyckoff <pw@osc.edu>
* iconvdata/tst-tables.sh: Invoke other shell scripts through ${SHELL}.
* iconvdata/tst-table.sh: Likewise.
* iconvdata/gconv-modules: Add aliases for Winblowz charsets.
Patch by Joseph S. Myers <jsm28@cam.ac.uk>.
* iconvdata/tst-tables.sh: Actually return with an error if
something goes wrong.
* iconvdata/tst-table.sh: Return with an error if any of the cmp fails.
* iconvdata/big5hkscs.c (BODY of FROM_LOOP): Reject 0xff as input.
