Changing tst-cleanup4.c to use xread instead of read caused
the nptl/tst-cleanupx4 test to fail. The routines in libsupport.a
need to be built with exception handling and asynchronous unwind
table support.
v2: Use "CFLAGS-.oS" instead of "override CFLAGS".
With fortification enabled, system calls return result needs to be checked,
has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, read calls return result needs to be checked,
has it gets the __wur macro enabled.
Note on read call removal from sysdeps/pthread/tst-cancel20.c and
sysdeps/pthread/tst-cancel21.c:
It is assumed that this second read call was there to overcome the race
condition between pipe closure and thread cancellation that could happen
in the original code. Since this race condition got fixed by
d0e3ffb7a5 the second call seems
superfluous. Hence, instead of checking for the return value of read, it
looks reasonable to simply remove it.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, fgets calls return result needs to be checked,
has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, fread calls return result needs to be checked,
has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, few function calls return result need to be
checked, has they get the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
In some cases (e.g. when podman creates user containers), the only other
group assigned to the executing user is nobody and fchown fails with it
because the group is not mapped. Do not fail the test in this case,
instead exit as unsupported.
Reported-by: Frédéric Bérat <fberat@redhat.com>
Tested-by: Frédéric Bérat <fberat@redhat.com>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add list end markers.
Sort text using scripts/sort-makefile-lines.py.
No code generation changes observed in non-test binary artifacts.
No regressions on x86_64 and i686.
Prevent sh from interpreting a user string as shell options if it
starts with '-' or '+'. Since the version of /bin/sh used for testing
system() is different from the full-fledged system /bin/sh add support
to it for handling "--" after "-c". Add a testcase to ensure the
expected behavior.
Signed-off-by: Joe Simmons-Talbott <josimmon@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Fix bug that SIGCHLD is erroneously blocked forever in the following
scenario:
1. Thread A calls system but hasn't returned yet
2. Thread B calls another system but returns
SIGCHLD would be blocked forever in thread B after its system() returns,
even after the system() in thread A returns.
Although POSIX does not require, glibc system implementation aims to be
thread and cancellation safe. This bug was introduced in
5fb7fc9635 when we moved reverting signal
mask to happen when the last concurrently running system returns,
despite that signal mask is per thread. This commit reverts this logic
and adds a test.
Signed-off-by: Adam Yi <ayi@janestreet.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants for the %i scanf format (in addition to the %b format,
which isn't yet implemented for scanf in glibc). Implement that scanf
support for glibc.
As with the strtol support, this is incompatible with previous C
standard versions, in that such an input string starting with 0b or 0B
was previously required to be parsed as 0 (with the rest of the input
potentially matching subsequent parts of the scanf format string).
Thus this patch adds 12 new __isoc23_* functions per long double
format (12, 24 or 36 depending on how many long double formats the
glibc configuration supports), with appropriate header redirection
support (generally very closely following that for the __isoc99_*
scanf functions - note that __GLIBC_USE (DEPRECATED_SCANF) takes
precedence over __GLIBC_USE (C2X_STRTOL), so the case of GNU
extensions to C89 continues to get old-style GNU %a and does not get
this new feature). The function names would remain as __isoc23_* even
if C2x ends up published in 2024 rather than 2023.
When scanf %b support is added, I think it will be appropriate for all
versions of scanf to follow C2x rules for inputs to the %b format
(given that there are no compatibility concerns for a new format).
Tested for x86_64 (full glibc testsuite). The first version was also
tested for powerpc (32-bit) and powerpc64le (stdio-common/ and wcsmbs/
tests), and with build-many-glibcs.py.
From the tests point of view, this is a necessary step for another
patch [1] and allows parsing macros such as "#define A | B". Without
it, a few tests [2] choke when the other patch [1] is applied:
/src/glibc/scripts/../elf/elf.h:4167: error: uninterpretable macro
token sequence: ( EF_ARC_MACH_MSK | EF_ARC_OSABI_MSK )
Traceback (most recent call last):
File "/src/glibc/elf/tst-glibcelf.py", line 23, in <module>
import glibcelf
File "/src/glibc/scripts/glibcelf.py", line 226, in <module>
_elf_h = _parse_elf_h()
^^^^^^^^^^^^^^
File "/src/glibc/scripts/glibcelf.py", line 223, in _parse_elf_h
raise IOError('parse error in elf.h')
OSError: parse error in elf.h
[1] ARC: update definitions in elf/elf.h
https://sourceware.org/pipermail/libc-alpha/2022-November/143503.html
[2]
tst-glibcelf, tst-relro-ldso, and tst-relro-libc
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Shahab Vahedi <shahab@synopsys.com>
Since Linux 4.9, the kernel provides
/proc/sys/user/max_{mnt,pid,user}_namespace as a limitation of number of
namespaces. Some distros (for example, Slint Linux 14.2.1) set them (or
only max_user_namespace) to zero as a "security policy" for disabling
namespaces.
The clone() call will set errno to ENOSPC under such a limitation. We
didn't check ENOSPC in the code so the test will FAIL, and report:
unable to unshare user/fs: No space left on device
This message is, unfortunately, very unhelpful. It leads people to
check the memory or disk space, instead of finding the real issue.
To improve the situation, we should check for ENOSPC and return
UNSUPPORTED as the test result. Also refactor check_for_unshare_hints()
to emit a proper message telling people how to make the test work, if
they really need to run the namespaced tests.
Reported-by: Philippe Delavalade <philippe.delavalade@orange.fr>
URL: https://lists.linuxfromscratch.org/sympa/arc/lfs-support/2022-06/msg00022.html
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: DJ Delorie <dj@redhat.com>
It makes sense to include the owner name (LHS) and record type in the
output, so that they can be checked for correctness.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Comment out bits of code that are only used when we *have* pid
namespaces, to avoid "unused code" warnings.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <xno817tnds.fsf@greed.delorie.com>
If the build itself is run in a container, we may not be able to
fully set up a nested container for test-container testing.
Notably is the mounting of /proc, since it's critical that it
be mounted from within the same PID namespace as its users, and
thus cannot be bind mounted from outside the container like other
mounts.
This patch defaults to using the parent's PID namespace instead of
creating a new one, as this is more likely to be allowed.
If the test needs an isolated PID namespace, it should add the "pidns"
command to its init script.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Use INT_STRLEN_BOUND to proper get the maximum pid_t size. Also
fix the wrong calculation (the 3 should multiply the sizeof (pid_t)).
Checked on x86_64-linux-gnu.
Check if the socket support 64-bit network packages timestamps
(SO_TIMESTAMP and SO_TIMESTAMPNS). This will be used on recvmsg
and recvmmsg tests to check if the timestamp should be generated.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Add new helpers support_create_and_chdir_toolong_temp_directory and
support_chdir_toolong_temp_directory to create and descend into
directory trees longer than PATH_MAX.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Some functions (e.g. stpcpy, pread64, etc.) had moved to POSIX in the
main headers as they got incorporated into the standard, but their
fortified variants remained under __USE_GNU. As a result, these
functions did not get fortified when _GNU_SOURCE was not defined.
Add test wrappers that check all functions tested in tst-chk0 at all
levels with _GNU_SOURCE undefined and then use the failures to (1)
exclude checks for _GNU_SOURCE functions in these tests and (2) Fix
feature macro guards in the fortified function headers so that they're
the same as the ones in the main headers.
This fixes BZ #28746.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Check if the socket support 64-bit network packages timestamps
(SO_TIMESTAMP and SO_TIMESTAMPNS). This will be used on recvmsg
and recvmmsg tests to check if the timestamp should be generated.
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
On Ice Lake and Tiger Lake laptops, some test programs timeout when there
are 3 "make check -j8" runs in parallel. Add --with-timeoutfactor=NUM to
specify an integer to scale the timeout of test programs, which can be
overriden by TIMEOUTFACTOR environment variable.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This is the first of a 2-part patch set that fixes slow DSO sorting behavior in
the dynamic loader, as reported in BZ #17645. In order to facilitate such a
large modification to the dynamic loader, this first patch implements a testing
framework for validating shared object sorting behavior, to enable comparison
between old/new sorting algorithms, and any later enhancements.
This testing infrastructure consists of a Python script
scripts/dso-ordering-test.py' which takes in a description language, consisting
of strings that describe a set of link dependency relations between DSOs, and
generates testcase programs and Makefile fragments to automatically test the
described situation, for example:
a->b->c->d # four objects linked one after another
a->[bc]->d;b->c # a depends on b and c, which both depend on d,
# b depends on c (b,c linked to object a in fixed order)
a->b->c;{+a;%a;-a} # a, b, c serially dependent, main program uses
# dlopen/dlsym/dlclose on object a
a->b->c;{}!->[abc] # a, b, c serially dependent; multiple tests generated
# to test all permutations of a, b, c ordering linked
# to main program
(Above is just a short description of what the script can do, more
documentation is in the script comments.)
Two files containing several new tests, elf/dso-sort-tests-[12].def are added,
including test scenarios for BZ #15311 and Redhat issue #1162810 [1].
Due to the nature of dynamic loader tests, where the sorting behavior and test
output occurs before/after main(), generating testcases to use
support/test-driver.c does not suffice to control meaningful timeout for ld.so.
Therefore a new utility program 'support/test-run-command', based on
test-driver.c/support_test_main.c has been added. This does the same testcase
control, but for a program specified through a command-line rather than at the
source code level. This utility is used to run the dynamic loader testcases
generated by dso-ordering-test.py.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1162810
Signed-off-by: Chung-Lin Tang <cltang@codesourcery.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
GCC 4.9.0 added the alloc_align attribute to say that a function
argument specifies the alignment of the returned pointer. Clang supports
the attribute too. Using the attribute can allow a compiler to generate
better code if it knows the returned pointer has a minimum alignment.
See https://gcc.gnu.org/PR60092 for more details.
GCC implicitly knows the semantics of aligned_alloc and posix_memalign,
but not the obsolete memalign. As a result, GCC generates worse code
when memalign is used, compared to aligned_alloc. Clang knows about
aligned_alloc and memalign, but not posix_memalign.
This change adds a new __attribute_alloc_align__ macro to <sys/cdefs.h>
and then uses it on memalign (where it helps GCC) and aligned_alloc
(where GCC and Clang already know the semantics, but it doesn't hurt)
and xposix_memalign. It can't be used on posix_memalign because that
doesn't return a pointer (the allocated pointer is returned via a void**
parameter instead).
Unlike the alloc_size attribute, alloc_align only allows a single
argument. That means the new __attribute_alloc_align__ macro doesn't
really need to be used with double parentheses to protect a comma
between its arguments. For consistency with __attribute_alloc_size__
this patch defines it the same way, so that double parentheses are
required.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
I'd like to be able to test narrow and wide string interfaces, with
the narrow string tests using TEST_COMPARE_STRING and the wide string
tests using something analogous (possibly generated using macros from
a common test template for both the narrow and wide string tests where
appropriate).
Add such a TEST_COMPARE_STRING_WIDE, along with functions
support_quote_blob_wide and support_test_compare_string_wide that it
builds on. Those functions are built using macros from common
templates shared by the narrow and wide string implementations, though
I didn't do that for the tests of test functions. In
support_quote_blob_wide, I chose to use the \x{} delimited escape
sequence syntax proposed for C2X in N2785, rather than e.g. trying to
generate the end of a string and the start of a new string when
ambiguity would result from undelimited \x (when the next character
after such an escape sequence is valid hex) or forcing an escape
sequence to be used for the next character in the case of such
ambiguity.
Tested for x86_64.
The fd validity check in open_dev_null checks if fd > 0, which would
lead to a leaked fd if it is == 0.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some kernel versions (observed with kernel 5.14 and earlier) can list
"0" entries in /proc/self/task. This happens when a thread exits
while the task list is being constructed. Treat this entry as not
present, like the proposed kernel patch does:
[PATCH] procfs: Do not list TID 0 in /proc/<pid>/task
<https://lore.kernel.org/all/8735pn5dx7.fsf@oldenburg.str.redhat.com/>
Fixes commit 032d74eaf6 ("support: Add
support_wait_for_thread_exit").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
When testing nptl/tst-pthread-attr-affinity-fail fails with:
error: xsysconf.c:33: sysconf (83): Cannot allocate memory
error: 1 test failures
This happens as xsysconf checks the errno after running sysconf.
Internally the sysconf request for _SC_NPROCESSORS_CONF on linux
allocates memory. But there is a problem, even though malloc succeeds
errno is getting set to ENOMEM.
POSIX allows successful calls to clobber errno. So xsysconf just
checking errno is wrong. Fix xsysconf by only failing if we have an
error result and errno is set.
The recent change to use __KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64 to avoid
doing 64-bit checks on some platforms broke the test for hurd where
__KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64 is not defined. With error:
tst-itimer.c: In function 'do_test':
tst-itimer.c:103:11: error: '__KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64' undeclared (first use in this function)
103 | if (__KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tst-itimer.c:103:11: note: each undeclared identifier is reported only once for each function it appears in
Define a support helper to detect when setitimer and getitimer support
64-bit time_t.
Fixes commit 6e8a0aac2f ("time: Fix overflow itimer tests on 32-bit
systems").
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Joseph Myers <joseph@codesourcery.com>
It returns a range of file descriptor referring to the '/dev/null'
pathname. The function takes care of restarting the open range
if a file descriptor is found within the specified range and
also increases RLIMIT_NOFILE if required.
Checked on x86_64-linux-gnu.
If close() on infd and outfd succeeded, reset the fd numbers so that
we don't attempt to close them again.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
The benchmark and tests must fail in case of allocation failure in the
implementation array. Also annotate the x* allocators in support.h so
that the compiler has more information about them.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Replace _SC_MINSIGSTKSZ with _SC_SIGSTKSZ since sysconf (_SC_MINSIGSTKSZ)
returns the minimum number of bytes of free stack space required in order
to guarantee successful, non-nested handling of a single signal whose
handler is an empty function while sysconf (_SC_SIGSTKSZ) returns the
suggested minimum number of bytes of stack space required for a signal
stack.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Replace MINSIGSTKSZ with sysconf (_SC_MINSIGSTKSZ) since the constant
MINSIGSTKSZ used in glibc build may be too small.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The constant PTHREAD_STACK_MIN may be too small for some processors.
Rename _SC_SIGSTKSZ_SOURCE to _DYNAMIC_STACK_SIZE_SOURCE. When
_DYNAMIC_STACK_SIZE_SOURCE or _GNU_SOURCE are defined, define
PTHREAD_STACK_MIN to sysconf(_SC_THREAD_STACK_MIN) which is changed
to MIN (PTHREAD_STACK_MIN, sysconf(_SC_MINSIGSTKSZ)).
Consolidate <bits/local_lim.h> with <bits/pthread_stack_min.h> to
provide a constant target specific PTHREAD_STACK_MIN value.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
