Current optimized memchr for x86_64 does for input arguments pointers
module 64 in range of [49,63] if there is no searchr char in the rest
of 64-byte block a pointer addition which might overflow:
* sysdeps/x86_64/memchr.S
77 .p2align 4
78 L(unaligned_no_match):
79 add %rcx, %rdx
Add (uintptr_t)s % 16 to n in %rdx.
80 sub $16, %rdx
81 jbe L(return_null)
This patch fixes by adding a saturated math that sets a maximum pointer
value if it overflows (UINTPTR_MAX).
Checked on x86_64-linux-gnu and powerpc64-linux-gnu.
[BZ# 19387]
* sysdeps/x86_64/memchr.S (memchr): Avoid overflow in pointer
addition.
* string/test-memchr.c (do_test): Remove alignment limitation.
(test_main): Add test that trigger BZ# 19387.
These are called from the kernel with the stack at a carefully-
chosen location so that the stack frame can be restored: they must not
move the stack pointer lest garbage be restored into the registers.
We explicitly inhibit protection for SPARC and for signal/sigreturn.c:
other arches either define their sigreturn stubs in .S files, or (i386,
x86_64, mips) use macros expanding to top-level asm blocks and explicit
labels in the text section to mock up a "function" without telling the
compiler that one is there at all.
Add a hidden __stack_chk_fail_local alias to libc.so,
and make sure that on targets which use __stack_chk_fail,
this does not introduce a local PLT reference into libc.so.
When dynamically linking, ifunc resolvers are called before TLS is
initialized, so they cannot be safely stack-protected.
We avoid disabling stack-protection on large numbers of files by
using __attribute__ ((__optimize__ ("-fno-stack-protector")))
to turn it off just for the resolvers themselves. (We provide
the attribute even when statically linking, because we will later
use it elsewhere too.)
The address of the stack canary is stored in a per-thread variable,
which means that we must ensure that the TLS area is intialized before
calling any -fstack-protector'ed functions. For dynamically linked
applications, we ensure this (in a later patch) by disabling
-fstack-protector for the whole dynamic linker, but for static
applications, the AT_ENTRY address is called directly by the kernel, so
we must deal with the problem differently.
In static appliations, __libc_setup_tls performs the TCB setup and TLS
initialization, so this commit arranges for it to be called early and
unconditionally. The call (and the stack guard initialization) is
before the DL_SYSDEP_OSCHECK hook, which if set will probably call
functions which are stack-protected (it does on Linux and NaCL too). We
also move apply_irel up, so that we can still safely call functions that
require ifuncs while in __libc_setup_tls (though if stack-protection is
enabled we still have to avoid calling functions that are not
stack-protected at this stage).
Currently strsep calls strpbrk is is now a veneer to strcspn. Calling
strcspn directly is faster. Since it handles a delimiter string of size
1 as a special case, this is not needed in strsep itself. Although this
means there is a slightly higher overhead if the delimiter size is 1,
all other cases are slightly faster. The overall performance gain is 5-10%
on AArch64.
The string/bits/string2.h header contains optimizations for constant
delimiters of size 1-3. Benchmarking these showed similar performance for
size 1 (since in all cases strchr/strchrnul is used), while size 2 and 3
can give up to 2x speedup for small input strings. However if these cases
are common it seems much better to add this optimization to strcspn.
So move these header optimizations to string-inlines.c.
Improve the strsep benchmark so that it actually benchmarks something.
The current version contains a delimiter character at every position in the
input string, so there is very little work to do, and the extremely inefficent
simple_strsep implementation appears fastest in every case. The new version
has either no match in the input for the fail case and a match halfway in the
input for the success case. The input is then restored so that each iteration
does exactly the same amount of work. Reduce the number of testcases since
simple_strsep takes a lot of time now.
* benchtests/bench-strsep.c (oldstrsep): Add old implementation.
(do_one_test) Restore original string so iteration works.
* string/string-inlines.c (do_test): Create better input strings.
(test_main) Reduce number of testruns.
* string/string-inlines.c (__old_strsep_1c): New function.
(__old_strsep_2c): Likewise.
(__old_strsep_3c): Likewise.
* string/strsep.c (__strsep): Remove case of small delim string.
Call strcspn directly rather than strpbrk.
* string/bits/string2.h (__strsep): Remove define.
(__strsep_1c): Remove.
(__strsep_2c): Remove.
(__strsep_3c): Remove.
(strsep): Remove.
* sysdeps/unix/sysv/linux/internal_statvfs.c
(__statvfs_getflags): Rename to __strsep.
Commit 7a5e3d9d63 (elf: Assume TLS is
initialized in _dl_map_object_from_fd) removed the last call of
_dl_tls_setup, but did not remove the function itself.
With stack protection enabled, these files have external symbol
references for the first time, so the fact that they are not compiled
with -fPIE and are then linked into a -pie binary starts to hurt.
TS 18661-1 defines roundeven functions that round a floating-point
number to the nearest integer, in that floating-point type, with ties
rounding to even (whereas the round functions round ties away from
zero). As with other such functions, they raise no exceptions apart
from "invalid" for signaling NaNs. There was a previous user request
for this functionality in glibc in
<https://sourceware.org/ml/libc-help/2015-02/msg00005.html>.
This patch implements these functions for glibc. The implementations
use integer bit-manipulation (or roundeven on the high and low parts,
in the IBM long double case). It's possible that there may be faster
approaches on some architectures (in particular, on AArch64 the frintn
instruction should do exactly what's required); I'll leave it to
architecture maintainers or others interested to implement such
architecture-specific versions if desired. (Where architectures have
instructions to round to nearest integer in the current rounding mode,
implementations saving and restoring the rounding mode - and dealing
with exceptions if those instructions generate "inexact" - are also
possible, though their performance depends on the cost of manipulating
exceptions / rounding mode state.)
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(roundeven): New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New
macro.
* math/Versions (roundeven): New libm symbol at version
GLIBC_2.25.
(roundevenf): Likewise.
(roundevenl): Likewise.
* math/Makefile (libm-calls): Add s_roundevenF.
* math/libm-test.inc (roundeven_test_data): New array.
(roundeven_test): New function.
(main): Call roundeven_test.
* math/test-tgmath.c (NCALLS): Increase to 134.
(F(compile_test)): Call roundeven.
(F(roundeven)): New function.
* manual/arith.texi (Rounding Functions): Document roundeven,
roundevenf and roundevenl.
* manual/libm-err-tab.pl (@all_functions): Add roundeven.
* include/math.h (roundeven): Use libm_hidden_proto.
* sysdeps/ieee754/dbl-64/s_roundeven.c: New file.
* sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise.
* sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
roundeven.
(CFLAGS-nldbl-roundeven.c): New variable.
* sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
This patch decrements the adapt_count while unlocking the futex
instead of before aquiring the futex as it is done on power, too.
Furthermore a transaction is only started if the futex is currently free.
This check is done after starting the transaction, too.
If the futex is not free and the transaction nesting depth is one,
we can simply end the started transaction instead of aborting it.
The implementation of this check was faulty as it always ended the
started transaction. By using the fallback path, the the outermost
transaction was aborted. Now the outermost transaction is aborted
directly.
This patch also adds some commentary and aligns the code in
elision-trylock.c to the code in elision-lock.c as possible.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/lowlevellock.h
(__lll_unlock_elision, lll_unlock_elision): Add adapt_count argument.
* sysdeps/unix/sysv/linux/s390/elision-lock.c:
(__lll_lock_elision): Decrement adapt_count while unlocking
instead of before locking.
* sysdeps/unix/sysv/linux/s390/elision-trylock.c
(__lll_trylock_elision): Likewise.
* sysdeps/unix/sysv/linux/s390/elision-unlock.c:
(__lll_unlock_elision): Likewise.
This patch implements __libc_tbegin_retry macro which is equivalent to
gcc builtin __builtin_tbegin_retry, except the changes which were applied
to __libc_tbegin in the previous patch.
If tbegin aborts with _HTM_TBEGIN_TRANSIENT. Then this macros restores
the fpc, fprs and automatically retries up to retry_cnt tbegins.
Further saving of the state is omitted as it is already saved in the
first round. Before retrying a further transaction, the
transaction-abort-assist instruction is used to support the cpu.
This macro is now used in function __lll_lock_elision.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/htm.h(__libc_tbegin_retry): New macro.
* sysdeps/unix/sysv/linux/s390/elision-lock.c (__lll_lock_elision):
Use __libc_tbegin_retry macro.
This patch defines __libc_tbegin, __libc_tend, __libc_tabort and
__libc_tx_nesting_depth in htm.h which replaces the direct usage of
equivalent gcc builtins.
We have to use an own inline assembly instead of __builtin_tbegin,
as tbegin has to filter program interruptions which can't be done with
the builtin. Before this change, e.g. a segmentation fault within a
transaction, leads to a coredump where the instruction pointer points
behind the tbegin instruction instead of real failing one.
Now the transaction aborts and the code should be reexecuted by the
fallback path without transactions. The segmentation fault will
produce a coredump with the real failing instruction.
The fpc is not saved before starting the transaction. If e.g. the
rounging mode is changed and the transaction is aborting afterwards,
the builtin will not restore the fpc. This is now done with the
__libc_tbegin macro.
Now the call saved fprs have to be saved / restored in the
__libc_tbegin macro. Using the gcc builtin had forced the saving /
restoring of fprs at begin / end of e.g. __lll_lock_elision function.
The new macro saves these fprs before tbegin instruction and only
restores them on a transaction abort. Restoring is not needed on
a successfully started transaction.
The used inline assembly does not clobber the fprs / vrs!
Clobbering the latter ones would force the compiler to save / restore
the call saved fprs as those overlap with the vrs, but they only
need to be restored if the transaction fails. Thus the user of the
tbegin macros has to compile the file / function with -msoft-float.
It prevents gcc from using fprs / vrs.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/Makefile (elision-CFLAGS):
Add -msoft-float.
* sysdeps/unix/sysv/linux/s390/htm.h: New File.
* sysdeps/unix/sysv/linux/s390/elision-lock.c:
Use __libc_t* transaction macros instead of __builtin_t*.
* sysdeps/unix/sysv/linux/s390/elision-trylock.c: Likewise.
* sysdeps/unix/sysv/linux/s390/elision-unlock.c: Likewise.
This uses atomic operations to access lock elision metadata that is accessed
concurrently (ie, adapt_count fields). The size of the data is less than a
word but accessed only with atomic loads and stores.
See also x86 commit ca6e601a9d:
"Use C11-like atomics instead of plain memory accesses in x86 lock elision."
ChangeLog:
* sysdeps/unix/sysv/linux/s390/elision-lock.c
(__lll_lock_elision): Use atomics to load / store adapt_count.
* sysdeps/unix/sysv/linux/s390/elision-trylock.c
(__lll_trylock_elision): Likewise.
Patch disables Intel TSX on some Haswell processors to avoid TSX
on kernels that weren't updated with the latest microcode package
(which disables broken feature by default).
* sysdeps/x86/cpu-features.c (get_common_indeces): Add
stepping identification.
(init_cpu_features): Add handle of Haswell.
explicit_bzero(s, n) is the same as memset(s, 0, n), except that the
compiler is not allowed to delete a call to explicit_bzero even if the
memory pointed to by 's' is dead after the call. Right now, this effect
is achieved externally by having explicit_bzero be a function whose
semantics are unknown to the compiler, and internally, with a no-op
asm statement that clobbers memory. This does mean that small
explicit_bzero operations cannot be expanded inline as small memset
operations can, but on the other hand, small memset operations do get
deleted by the compiler. Hopefully full compiler support for
explicit_bzero will happen relatively soon.
There are two new tests: test-explicit_bzero.c verifies the
visible semantics in the same way as the existing test-bzero.c,
and tst-xbzero-opt.c verifies the not-being-optimized-out property.
The latter is conceptually based on a test written by Matthew Dempsky
for the OpenBSD regression suite.
The crypt() implementation has an immediate use for this new feature.
We avoid having to add a GLIBC_PRIVATE alias for explicit_bzero
by running all of libcrypt's calls through the fortified variant,
__explicit_bzero_chk, which is in the impl namespace anyway. Currently
I'm not aware of anything in libc proper that needs this, but the
glue is all in place if it does become necessary. The legacy DES
implementation wasn't bothering to clear its buffers, so I added that,
mostly for consistency's sake.
* string/explicit_bzero.c: New routine.
* string/test-explicit_bzero.c, string/tst-xbzero-opt.c: New tests.
* string/Makefile (routines, strop-tests, tests): Add them.
* string/test-memset.c: Add ifdeffage for testing explicit_bzero.
* string/string.h [__USE_MISC]: Declare explicit_bzero.
* debug/explicit_bzero_chk.c: New routine.
* debug/Makefile (routines): Add it.
* debug/tst-chk1.c: Test fortification of explicit_bzero.
* string/bits/string3.h: Fortify explicit_bzero.
* manual/string.texi: Document explicit_bzero.
* NEWS: Mention addition of explicit_bzero.
* crypt/crypt-entry.c (__crypt_r): Clear key-dependent intermediate
data before returning, using explicit_bzero.
* crypt/md5-crypt.c (__md5_crypt_r): Likewise.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* include/string.h: Redirect internal uses of explicit_bzero
to __explicit_bzero_chk[_internal].
* string/Versions [GLIBC_2.25]: Add explicit_bzero.
* debug/Versions [GLIBC_2.25]: Add __explicit_bzero_chk.
* sysdeps/arm/nacl/libc.abilist
* sysdeps/unix/sysv/linux/aarch64/libc.abilist
* sysdeps/unix/sysv/linux/alpha/libc.abilist
* sysdeps/unix/sysv/linux/arm/libc.abilist
* sysdeps/unix/sysv/linux/hppa/libc.abilist
* sysdeps/unix/sysv/linux/i386/libc.abilist
* sysdeps/unix/sysv/linux/ia64/libc.abilist
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist
* sysdeps/unix/sysv/linux/microblaze/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist
* sysdeps/unix/sysv/linux/nios2/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist
* sysdeps/unix/sysv/linux/sh/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist:
Add entries for explicit_bzero and __explicit_bzero_chk.
Current optimized powercp64/power7 memchr uses a strategy to check for
p versus align(p+n) (where 'p' is the input char pointer and n the
maximum size to check for the byte) without taking care for possible
overflow on the pointer addition in case of large 'n'.
It was triggered by 3038145ca2 where default rawmemchr (used to
created ppc64 rawmemchr in ifunc selection) now uses memchr (p, c, (size_t)-1)
on its implementation.
This patch fixes it by implement a satured addition where overflows
sets the maximum pointer size to UINTPTR_MAX.
Checked on powerpc64le-linux-gnu.
[BZ# 20971]
* sysdeps/powerpc/powerpc64/power7/memchr.S (__memchr): Avoid
overflow in pointer addition.
* string/test-memchr.c (do_test): Add an argument to pass as
the size on memchr.
(test_main): Add check for SIZE_MAX.
This patch converts the wrapper scalbln (which set errno directly
rather than doing anything with __kernel_standard) to use the
type-generic template machinery, in the same way that has been done
for ldexp.
Tested for powerpc64le, s390, and x86_64.
Various fmax and fmin function implementations mishandle sNaN
arguments:
(a) When both arguments are NaNs, the return value should be a qNaN,
but sometimes it is an sNaN if at least one argument is an sNaN.
(b) Under TS 18661-1 semantics, if either argument is an sNaN then the
result should be a qNaN (whereas if one argument is a qNaN and the
other is not a NaN, the result should be the non-NaN argument).
Various implementations treat sNaNs like qNaNs here.
This patch fixes the x86 and x86_64 versions (ignoring float and
double for 32-bit x86 given the inability to reliably avoid the sNaN
turning into a qNaN before it gets to the called function). Tests of
sNaN inputs to these functions are added.
Note on architecture versions I haven't changed for this issue:
AArch64 already gets this right (it uses a hardware instruction with
the correct semantics for both quiet and signaling NaNs) and does not
need changes. It's possible Alpha, IA64, SPARC might need changes
(this would be shown by the testsuite if so).
Tested for x86_64 and x86 (both i686 and i586 builds, to cover the
different x86 implementations).
[BZ #20947]
* sysdeps/i386/fpu/s_fmaxl.S (__fmaxl): Add the arguments when
either is a signaling NaN.
* sysdeps/i386/fpu/s_fminl.S (__fminl): Likewise. Make code
follow fmaxl more closely.
* sysdeps/i386/i686/fpu/s_fmaxl.S (__fmaxl): Add the arguments
when either is a signaling NaN.
* sysdeps/i386/i686/fpu/s_fminl.S (__fminl): Likewise.
* sysdeps/x86_64/fpu/s_fmax.S (__fmax): Likewise.
* sysdeps/x86_64/fpu/s_fmaxf.S (__fmaxf): Likewise.
* sysdeps/x86_64/fpu/s_fmaxl.S (__fmaxl): Likewise.
* sysdeps/x86_64/fpu/s_fmin.S (__fmin): Likewise.
* sysdeps/x86_64/fpu/s_fminf.S (__fminf): Likewise.
* sysdeps/x86_64/fpu/s_fminl.S (__fminl): Likewise.
* math/libm-test.inc (fmax_test_data): Add tests of sNaN inputs.
(fmin_test_data): Likewise.
Various fmax and fmin function implementations mishandle sNaN
arguments:
(a) When both arguments are NaNs, the return value should be a qNaN,
but sometimes it is an sNaN if at least one argument is an sNaN.
(b) Under TS 18661-1 semantics, if either argument is an sNaN then the
result should be a qNaN (whereas if one argument is a qNaN and the
other is not a NaN, the result should be the non-NaN argument).
Various implementations treat sNaNs like qNaNs here.
This patch fixes the powerpc versions of these functions (shared by
float and double, 32-bit and 64-bit). The structure of those versions
is that all ordered cases are already handled before anything dealing
with the case where the arguments are unordered; thus, this patch
causes no change to the code executed in the common case (neither
argument a NaN).
Tested for powerpc (32-bit and 64-bit), together with tests to be
added along with the x86_64 / x86 fixes.
[BZ #20947]
* sysdeps/powerpc/fpu/s_fmax.S (__fmax): Add the arguments when
either is a signaling NaN.
* sysdeps/powerpc/fpu/s_fmin.S (__fmin): Likewise.
Information about whether the ABI of long double is the same as that
of double is split between bits/mathdef.h and bits/wordsize.h.
When the ABIs are the same, bits/mathdef.h defines
__NO_LONG_DOUBLE_MATH. In addition, in the case where the same glibc
binary supports both -mlong-double-64 and -mlong-double-128,
bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with
__NO_LONG_DOUBLE_MATH if this particular compilation is with
-mlong-double-64.
As part of the refactoring I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this
patch puts all that information in a single header,
bits/long-double.h. It is included from sys/cdefs.h alongside the
include of bits/wordsize.h, so other headers generally do not need to
include bits/long-double.h directly.
Previously, various bits/mathdef.h headers and bits/wordsize.h headers
had this long double information (including implicitly in some
bits/mathdef.h headers through not having the defines present in the
default version). After the patch, it's all in six bits/long-double.h
headers. Furthermore, most of those new headers are not
architecture-specific. Architectures with optional long double all
use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128,
ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt). Thus a generic header
for the case where long double = double, and headers in ldbl-128,
ldbl-96 and ldbl-opt, suffices to cover every architecture except for
cases where long double properties vary between different ABIs sharing
a set of installed headers; fortunately all the ldbl-opt cases share a
single compiler-predefined macro __LONG_DOUBLE_128__ that can be used
to tell whether this compilation is -mlong-double-64 or
-mlong-double-128.
The two cases where a set of headers is shared between ABIs with
different long double properties, MIPS (o32 has long double = double,
other ABIs use ldbl-128) and SPARC (32-bit has optional long double,
64-bit has required long double), need their own bits/long-double.h
headers.
As with bits/wordsize.h, multiple-include protection for this header
is generally implicit through the include guards on sys/cdefs.h, and
multiple inclusion is harmless in any case. There is one subtlety:
the header must not define __LONG_DOUBLE_MATH_OPTIONAL if
__NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing
so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines
__NO_LONG_DOUBLE_MATH itself before including system headers. Subject
to keeping that working, it would be reasonable to move these macros
from defined/undefined #ifdef to always-defined 1/0 #if semantics, but
this patch does not attempt to do so, just rearranges where the macros
are defined.
After this patch, the only use of bits/mathdef.h is the alpha one for
modifying complex function ABIs for old GCC. Thus, all versions of
the header other than the default and alpha versions are removed, as
is the include from math.h.
Tested for x86_64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/long-double.h: New file.
* sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise.
* sysdeps/mips/bits/long-double.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise.
* math/Makefile (headers): Add bits/long-double.h.
* misc/sys/cdefs.h: Include <bits/long-double.h>.
* stdlib/strtold.c: Include <bits/long-double.h> instead of
<bits/wordsize.h>.
* bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion.
[!__NO_LONG_DOUBLE_MATH]: Remove conditional code.
* math/math.h: Do not include <bits/mathdef.h>.
* sysdeps/aarch64/bits/mathdef.h: Remove file.
* sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow
inclusion.
* sysdeps/ia64/bits/mathdef.h: Remove file.
* sysdeps/m68k/m680x0/bits/mathdef.h: Likewise.
* sysdeps/mips/bits/mathdef.h: Likewise.
* sysdeps/powerpc/bits/mathdef.h: Likewise.
* sysdeps/s390/bits/mathdef.h: Likewise.
* sysdeps/sparc/bits/mathdef.h: Likewise.
* sysdeps/x86/bits/mathdef.h: Likewise.
* sysdeps/s390/s390-32/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove
conditional code.
* sysdeps/s390/s390-64/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
This patch makes bits/fcntl-linux.h include <linux/falloc.h> to define
the FALLOC_* flags under __USE_GNU (linux/falloc.h defines only those
bits, nothing else).
Tested for x86_64 and x86.
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_GNU]: Include
<linux/falloc.h>.
(FALLOC_FL_KEEP_SIZE): Remove.
(FALLOC_FL_PUNCH_HOLE): Likewise.
(FALLOC_FL_COLLAPSE_RANGE): Likewise.
(FALLOC_FL_ZERO_RANGE): Likewise.
This patch consolidates the Linux renameat implementation on
sysdeps/unix/sysv/linux/renameat.c. The renameat syscall was
deprecated at b0da6d44 for newer architectures, so using the
auto-generation list may generate wrappers that returns ENOSYS.
Current code try to use __NR_renameat and if it is not define
it uses __NR_renameat2.
Checked on x86_64 and aarch64.
* sysdeps/unix/sysv/linux/renameat.c: New file.
* sysdeps/unix/sysv/linux/syscalls.list: Remove renameat.
This patch consolidates the Linux rename implementation on
sysdeps/unix/sysv/linux/rename.c. Current code try to use
__NR_rename if is defined and apply the same strategy for
__NR_renameat and __NR_renameat2.
Check on x86_64 and aarch64.
* sysdeps/unix/sysv/linux/rename.c: New file.
* sysdeps/unix/sysv/linux/generic/rename.c: Remove file.
This patch converts the wrapper log1p (which set errno directly rather
than doing anything with __kernel_standard) to use the type-generic
template machinery, in the same way that has been done for ilogb.
Tested for powerpc64le, s390, and x86_64.
The new test driver in <support/test-driver.c> has feature parity with
the old one. The main difference is that its hooking mechanism is
based on functions and function pointers instead of macros. This
commit also implements a new environment variable, TEST_COREDUMPS,
which disables the code which disables coredumps (that is, it enables
them if the invocation environment has not disabled them).
<test-skeleton.c> defines wrapper functions so that it is possible to
use existing macros with the new-style hook functionality.
This commit changes only a few test cases to the new test driver, to
make sure that it works as expected.
TS 18661-1 generally defines libm functions taking sNaN arguments to
return qNaN and raise "invalid", even for the cases where a
corresponding qNaN argument would not result in a qNaN return. This
includes hypot with one argument being an infinity and the other being
an sNaN. This patch duly fixes hypot implementatations in glibc
(generic and powerpc) to ensure qNaN, computed by arithmetic on the
arguments, is returned in that case.
Various implementations do their checks for infinities and NaNs inline
by manipulating the representations of the arguments. For simplicity,
this patch just uses issignaling to check for sNaN arguments. This
could be inlined like the existing code (with due care about reversed
quiet NaN conventions, for implementations where that is relevant),
but given that all these checks are in cases where it's already known
at least one argument is not finite, which should be the uncommon
case, that doesn't seem worthwhile unless performance issues are
observed in practice.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #20940]
* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Do not
return Inf for arguments Inf and sNaN.
* sysdeps/ieee754/flt-32/e_hypotf.c (__ieee754_hypotf): Likewise.
* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl):
Likewise.
* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
* sysdeps/powerpc/fpu/e_hypot.c (TEST_INF_NAN): Do not return Inf
for arguments Inf and sNaN. When returning a NaN, compute it by
arithmetic on the arguments.
* sysdeps/powerpc/fpu/e_hypotf.c (TEST_INF_NAN): Likewise.
* math/libm-test.inc (pow_test_data): Add tests of sNaN arguments.
The x86_64/x86 powl implementations mishandle sNaN arguments, both by
returning sNaN in some cases (instead of doing arithmetic on the
arguments to produce the result when NaN arguments result in NaN
results) and by treating sNaN the same as qNaN for arguments (1, sNaN)
and (sNaN, 0), contrary to TS 18661-1 which requires those cases to
return qNaN instead of 1.
This patch makes the x86_64/x86 powl implementations follow TS 18661-1
semantics for sNaN arguments; sNaN tests are also added for pow.
Given the problems with testing float and double sNaN arguments on
32-bit x86 (sNaN tests disabled because the compiler may convert
unnecessarily to a qNaN when passing arguments), no changes are made
to the powf and pow implementations there.
Tested for x86_64 and x86.
[BZ #20916]
* sysdeps/i386/fpu/e_powl.S (__ieee754_powl): Do not return 1 for
arguments (sNaN, 0) or (1, sNaN). Do arithmetic on NaN arguments
to compute result.
* sysdeps/x86_64/fpu/e_powl.S (__ieee754_powl): Likewise.
* math/libm-test.inc (pow_test_data): Add tests of sNaN arguments.
This uses atomic operations to access lock elision metadata that is accessed
concurrently (ie, adapt_count fields). The size of the data is less than a
word but accessed only with atomic loads and stores; therefore, we add
support for shorter-size atomic load and stores too.
* include/atomic.h (__atomic_check_size_ls): New.
(atomic_load_relaxed, atomic_load_acquire, atomic_store_relaxed,
atomic_store_release): Use it.
* sysdeps/x86/elide.h (ACCESS_ONCE): Remove.
(elision_adapt, ELIDE_LOCK): Use atomics.
* sysdeps/unix/sysv/linux/x86/elision-lock.c (__lll_lock_elision): Use
atomics and improve code comments.
* sysdeps/unix/sysv/linux/x86/elision-trylock.c
(__lll_trylock_elision): Likewise.
Various pow function implementations mishandle sNaN arguments in
various ways. This includes returning sNaN instead of qNaN for sNaN
arguments. For arguments (1, sNaN) and (sNaN, 0), TS 18661-1
semantics are also that the result should be qNaN, whereas with a qNaN
argument there the result should be 1, but for the dbl-64
implementation of pow there are issues with sNaN arguments beyond not
implementing the TS 18661-1 semantics in those special cases.
This patch makes the implementations in sysdeps/ieee754 follow the TS
18661-1 semantics consistently. Because x86 / x86_64 implementations
still need fixing, testcases are not included with this patch; they
will be included with the fix for the x86 / x86_64 versions.
Tested for x86_64, x86, mips64 and powerpc (with such testcases, which
pass in the mips64 and powerpc cases).
[BZ #20916]
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Do not return 1
for arguments (sNaN, 0) or (1, sNaN). Do arithmetic on NaN
arguments to compute result.
* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Do not return
1 for arguments (sNaN, 0) or (1, sNaN).
* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise.
The dbl-64 implementation of __ieee754_pow returns a NaN for pow
(qNaN, 0) when it should return 1. Normally this is covered up by the
wrappers ending up calling __kernel_standard which fixes up the result
for this case, but for -lieee the wrappers are bypassed and the bad
result gets through as a return value.
Now, the wrappers fixing this are dealing with variant error handling
that wants a result of NaN for pow (qNaN, 0), and only ever call
__kernel_standard for this case if NaN resulted from __ieee754_pow.
This leads to a question of whether the dbl-64 code might be
deliberately returning NaN in order to use those code paths. However,
I can find no sign that this is deliberate. If it were deliberate one
would expect other implementations to do the same, and would expect
the return of NaN to be very old, but it appears it came in by
accident when the present e_pow.c implementation replaced an fdlibm
implementation in 2001. So it appears to be unintended that this path
through the pow wrapper could be used at all.
So this patch fixes the implementation to return 1 in this case as
expected. This is consistent with all the other implementations. The
relevant path through the wrappers is now unreachable, so is removed
(which is the main motivation of this patch: to avoid that path
becoming accidentally reachable when implementing TS 18661-1 semantics
that pow (sNaN, 0) should return qNaN with "invalid" raised). Another
path that would require __ieee754_pow (0, 0) to return 0 is also
unreachable (as all implementations return 1, in accordance with C99
semantics), so is removed as well.
Note: we don't have anything set up to test -lieee, which in any case
is obsolescent (at some point we should remove the ability for new
programs to access _LIB_VERSION or define matherr and have it called
by glibc). So testing will be implicit through sNaN tests added when
making sNaN inputs work correctly for pow functions.
Tested for x86_64 and x86.
[BZ #20919]
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Do not return
NaN first argument when raised to power 0.
* math/w_pow.c (__pow): Do not check for NaN or zero results from
raising to power zero.
* math/w_powf.c (__powf): Likewise.
* math/w_powl.c (__powl): Likewise.
* sysdeps/ieee754/k_standard.c (__kernel_standard): Do not handle
pow (0, 0) or pow (NaN, 0).
TS 18661-1 defines llogb functions that are like ilogb except that
they return long int instead of int. Corresponding FP_LLOGB* macros
are defined, whose values are required to have the obvious
correspondence to those of the FP_ILOGB* macros.
This patch implements these functions and macros for glibc. llogb
uses the type-generic infrastructure, with an implementation similar
to the wrapper for ilogb but with additional conversion from FP_ILOGB*
to FP_LLOGB*; this approach avoids needing to modify or duplicate any
of the architecture-specific ilogb implementations. Tests are also
based on those for ilogb.
Ideally the llogb functions would alias the ilogb ones when long is
32-bit, but such aliasing requires the associated header declarations
of the different-type alias to be hidden, typically by defining macros
before including the header (see e.g. how
sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to
__hidden_lround before including <math.h>). The infrastructure for
type-generic function implementations does not support defining such
macros at present (since C code can't define a macro whose name is
determined by other macros). So this patch leaves them as separate
functions (similar to e.g. scalbln and scalbn being separate in such a
case as well), but with the remapping of FP_ILOGB* to FP_LLOGB*
conditioned out in the case where it would be the identity map.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb):
New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New
macro.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX):
New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise.
* math/Versions (llogb): New libm symbol at version GLIBC_2.25.
(llogbf): Likewise.
(llogbl): Likewise.
* math/Makefile (gen-libm-calls): Add w_llogbF.
(tests): Add test-fp-llogb-constants.
* math/w_llogb_template.c: New file. Based on
math/w_ilogb_template.c.
* math/libm-test.inc (llogb_test_data): New array.
(llogb_test): New function.
(main): Call llogb_test.
* math/test-fp-llogb-constants.c: New file. Based on
math/test-fp-ilogb-constants.c.
* math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call.
(do_test): Call check_return_llogb.
* math/test-tgmath.c (NCALLS): Increase to 126.
(F(compile_test)): Call llogb.
(F(llogb)): New function.
* manual/math.texi (Exponents and Logarithms): Document llogb,
llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN.
* manual/libm-err-tab.pl (@all_functions): Add llogb.
* sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file.
* sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb.
(CFLAGS-nldbl-llogb.c): New variable.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
When I added the getpayload and setpayload functions I failed to make
the ldbl-128 functions use the _Float128 type name like most other
ldbl-128 functions do in preparation for being used to implement *f128
functions. This patch fixes them to use that name.
Tested for mips64.
* sysdeps/ieee754/ldbl-128/s_getpayloadl.c (getpayloadl): Use
_Float128 instead of long double.
* sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c (FUNC): Likewise.
Commit c7debbdfac redirected the internal strrch to default powerpc64
implementation by redefining the weak_alias at
sysdeps/powerpc/powerpc64/multiarch/strchr-ppc64.c:
#undef weak_alias
#define weak_alias(name, aliasname) \
extern __typeof (__strrchr_ppc) aliasname \
__attribute__ ((weak, alias ("__strrchr_ppc")));
This creates a __GI_strchr alias that clashes with the IFUNC symbol in
stprchr.os. There is not need to define the default version for internal
version, since ifunc should work internally for powerpc64. This patch
removes the weak_alias indirection.
Checked on powerpc64le.
* sysdeps/powerpc/powerpc64/multiarch/strrchr-ppc64.c (weak_alias):
Remove redirection to __strrchr_ppc.
Continuing the refactoring of bits/mathdef.h, this patch stops it
defining FP_ILOGB0 and FP_ILOGBNAN, moving the required information to
a new header bits/fp-logb.h.
There are only two possible values of each of those macros permitted
by ISO C. TS 18661-1 adds corresponding macros for llogb, and their
values are required to correspond to those of the ilogb macros in the
obvious way. Thus two boolean values - for which the same choices are
correct for most architectures - suffice to determine the value of all
these macros, and by defining macros for those boolean values in
bits/fp-logb.h we can then define the public FP_* macros in math.h and
avoid the present duplication of the associated feature test macro
logic.
This patch duly moves to bits/fp-logb.h defining __FP_LOGB0_IS_MIN and
__FP_LOGBNAN_IS_MIN. Default definitions of those to 0 are correct
for both architectures, while ia64, m68k and x86 get their own
versions of bits/fp-logb.h to reflect their use of values different
from the defaults.
The patch renders many copies of bits/mathdef.h trivial (needed only
to avoid the default __NO_LONG_DOUBLE_MATH). I'll revise
<https://sourceware.org/ml/libc-alpha/2016-11/msg00865.html>
accordingly so that it removes all bits/mathdef.h headers except the
default one and the alpha one, and arranges for the header to be
included only by complex.h as the only remaining use at that point
will be for the alpha ABI issues there.
Tested for x86_64 and x86. Also did compile-only testing with
build-many-glibcs.py (using glibc sources from before the commit that
introduced many build failures with undefined __GI___sigsetjmp).
* bits/fp-logb.h: New file.
* sysdeps/ia64/bits/fp-logb.h: Likewise.
* sysdeps/m68k/m680x0/bits/fp-logb.h: Likewise.
* sysdeps/x86/bits/fp-logb.h: Likewise.
* math/Makefile (headers): Add bits/fp-logb.h.
* math/math.h: Include <bits/fp-logb.h>.
[__USE_ISOC99] (FP_ILOGB0): Define based on __FP_LOGB0_IS_MIN.
[__USE_ISOC99] (FP_ILOGBNAN): Define based on __FP_LOGBNAN_IS_MIN.
* bits/mathdef.h (FP_ILOGB0): Remove.
(FP_ILOGBNAN): Likewise.
* sysdeps/aarch64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/alpha/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/ia64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/mips/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/powerpc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/s390/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/sparc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/x86/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
Commit 142e0a9953 redirected the internal stpcpy to default powerpc64
implementation by redefining the weak_alias at
sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c:
#undef weak_alias
#define weak_alias(name, aliasname) \
extern __typeof (__stpcpy_ppc) aliasname \
__attribute__ ((weak, alias ("__stpcpy_ppc")));
This creates a __GI_stpcpy alias that clashes with the IFUNC symbol in
stpcpy.os. There is not need to define the default version for internal
version, since ifunc should work internally for powerpc64. This patch
removes the weak_alias indirection.
Checked on powerpc64le.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c (weak_alias):
Remove redirection to __stpcpy_ppc.
It is no longer needed since commit 6c444ad6e9
(elf: Do not use memalign for TCB/TLS blocks allocation [BZ #17730]).
Applications do not link against ld.so and will use the definition in
libc.so, so there is no ABI impact.
This change moves the main implementation of _dl_catch_error,
_dl_signal_error to libc.so, where TLS variables can be used
directly. This removes a writable function pointer from the
rtld_global variable.
For use during initial relocation, minimal implementations of these
functions are provided in ld.so. These are eventually interposed
by the libc.so implementations. This is implemented by compiling
elf/dl-error-skeleton.c twice, via elf/dl-error.c and
elf/dl-error-minimal.c.
As a side effect of this change, the static version of dl-error.c
no longer includes support for the
_dl_signal_cerror/_dl_receive_error mechanism because it is only
used in ld.so.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstat.c: Do not define
fxstat if XSTAT_IS_XSTAT64 is set to non-zero.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat.c: Ditto for
fxstatat.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat.c: Ditto for
lxstat.
* sysdeps/unix/sysv/linux/generic/wordsize-32/xstat.c: Ditto for xstat.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstat64.c: New file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat64.c: New file.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat64.c: Make __lxstat
an alias of __lxstat64 if XSTAT_IS_XSTAT64 is set to non-zero.
* sysdeps/unix/sysv/linux/generic/wordsize-32/xstat64.c: Ditto for
__xstat.
The __longjmp symbol was left in accidentally. It is not exported
through a Versions file, but through a .symver assembler directive.
The corresponding exported symbol was removed from the non-fpu
powerpc64 targets in commit 9b9ef82358.
