The usage of internal static symbol for statically linked binaries
does not work correctly for objects built with -D_TIME_BITS=64,
since the internal definition does not provide the expected aliases.
This patch makes it to use the default stat functions instead (which
uses the default 64 time_t alias and types).
Checked on i686-linux-gnu.
With the current set of fences, the version update at the start
of the TM write operation is redundant, and the version update
at the end does not need to use an atomic read-modify-write
operation.
Also use relaxed MO stores during the dlclose update, and skip any
version changes there.
Suggested-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
As explained in Hans Boehm, Can Seqlocks Get Along with Programming
Language Memory Models?, an acquire fence is needed in
_dlfo_read_success. The lack of a fence resulted in an observable
bug on powerpc64le compile-time load reordering.
The fence in _dlfo_mappings_begin_update has been reordered, turning
the fence/store sequence into a release MO store equivalent.
Relaxed MO loads are used on the reader side, and relaxed MO stores
on the writer side for the shared data, to avoid formal data races.
This is just to be conservative; it should not actually be necessary
given how the data is used.
This commit also fixes the test run time. The intent was to run it
for 3 seconds, but 0.3 seconds was enough to uncover the bug very
occasionally (while 3 seconds did not reliably show the bug on every
test run).
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
DT_RUNPATH is only used to find the immediate dependencies of the
executable or shared object containing the DT_RUNPATH entry. Update
LD_AUDIT dlopen call to try the DT_RUNPATH entry of the executable.
Add tst-audit14a, which is copied from tst-audit14, to DT_RUNPATH and
build tst-audit14 with -Wl,--disable-new-dtags to test DT_RPATH.
This partially fixes BZ #28455.
Add <dl-debug.h> to setup debugging entry in PT_DYNAMIC segment to support
DT_DEBUG, DT_MIPS_RLD_MAP_REL and DT_MIPS_RLD_MAP.
Tested on x86-64, x32 and i686 as well as with build-many-glibcs.py.
I've updated copyright dates in glibc for 2022. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus csu/version.c which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a small change to the copyright notice
in NEWS which should let NEWS get updated automatically next year.
Please remember to include 2022 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
It can be used to speed up the libgcc unwinder, and the internal
_dl_find_dso_for_object function (which is used for caller
identification in dlopen and related functions, and in dladdr).
_dl_find_object is in the internal namespace due to bug 28503.
If libgcc switches to _dl_find_object, this namespace issue will
be fixed. It is located in libc for two reasons: it is necessary
to forward the call to the static libc after static dlopen, and
there is a link ordering issue with -static-libgcc and libgcc_eh.a
because libc.so is not a linker script that includes ld.so in the
glibc build tree (so that GCC's internal -lc after libgcc_eh.a does
not pick up ld.so).
It is necessary to do the i386 customization in the
sysdeps/x86/bits/dl_find_object.h header shared with x86-64 because
otherwise, multilib installations are broken.
The implementation uses software transactional memory, as suggested
by Torvald Riegel. Two copies of the supporting data structures are
used, also achieving full async-signal-safety.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The dl_main sets the LM_ID_BASE to RT_ADD just before starting to
add load new shared objects. The state is set to RT_CONSISTENT just
after all objects are loaded.
However if a audit modules tries to dlmopen an inexistent module,
the _dl_open will assert that the namespace is in an inconsistent
state.
This is different than dlopen, since first it will not use
LM_ID_BASE and second _dl_map_object_from_fd is the sole responsible
to set and reset the r_state value.
So the assert on _dl_open can not really be seen if the state is
consistent, since _dt_main resets it. This patch removes the assert.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The vDSO is is listed in the link_map chain, but is never the subject of
an la_objopen call. A new internal flag __RTLD_VDSO is added that
acts as __RTLD_OPENEXEC to allocate the required 'struct auditstate'
extra space for the 'struct link_map'.
The return value from the callback is currently ignored, since there
is no PLT call involved by glibc when using the vDSO, neither the vDSO
are exported directly.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The rtld-audit interfaces introduces a slowdown due to enabling
profiling instrumentation (as if LD_AUDIT implied LD_PROFILE).
However, instrumenting is only necessary if one of audit libraries
provides PLT callbacks (la_pltenter or la_pltexit symbols). Otherwise,
the slowdown can be avoided.
The following patch adjusts the logic that enables profiling to iterate
over all audit modules and check if any of those provides a PLT hook.
To keep la_symbind to work even without PLT callbacks, _dl_fixup now
calls the audit callback if the modules implements it.
Co-authored-by: Alexander Monakov <amonakov@ispras.ru>
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_pltexit audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_pltenter audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_preinit audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_symbind{32,64} audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_objclose audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_objsearch audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_activity audit
callback.
Also for a new Lmid_t the namespace link_map list are empty, so it
requires to check if before using it. This can happen for when audit
module is used along with dlmopen.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It consolidates the code required to call la_objopen audit callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Remove AArch64 from comment for AT_MINSIGSTKSZ to match
commit 7cd60e43a6def40ecb75deb8decc677995970d0b
Author: Chang S. Bae <chang.seok.bae@intel.com>
Date: Tue May 18 13:03:15 2021 -0700
uapi/auxvec: Define the aux vector AT_MINSIGSTKSZ
Define AT_MINSIGSTKSZ in the generic uapi header. It is already used
as generic ABI in glibc's generic elf.h, and this define will prevent
future namespace conflicts. In particular, x86 is also using this
generic definition.
in Linux kernel 5.14.
p_align does not have to be a multiple of the page size. Only PT_LOAD
segment layout should be aligned to the page size.
1: Remove p_align check against the page size.
2. Use the page size, instead of p_align, to check PT_LOAD segment layout.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
With the morecore hook removed, there is not easy way to provide huge
pages support on with glibc allocator without resorting to transparent
huge pages. And some users and programs do prefer to use the huge pages
directly instead of THP for multiple reasons: no splitting, re-merging
by the VM, no TLB shootdowns for running processes, fast allocation
from the reserve pool, no competition with the rest of the processes
unlike THP, no swapping all, etc.
This patch extends the 'glibc.malloc.hugetlb' tunable: the value
'2' means to use huge pages directly with the system default size,
while a positive value means and specific page size that is matched
against the supported ones by the system.
Currently only memory allocated on sysmalloc() is handled, the arenas
still uses the default system page size.
To test is a new rule is added tests-malloc-hugetlb2, which run the
addes tests with the required GLIBC_TUNABLE setting. On systems without
a reserved huge pages pool, is just stress the mmap(MAP_HUGETLB)
allocation failure. To improve test coverage it is required to create
a pool with some allocated pages.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Linux Transparent Huge Pages (THP) current supports three different
states: 'never', 'madvise', and 'always'. The 'never' is
self-explanatory and 'always' will enable THP for all anonymous
pages. However, 'madvise' is still the default for some system and
for such case THP will be only used if the memory range is explicity
advertise by the program through a madvise(MADV_HUGEPAGE) call.
To enable it a new tunable is provided, 'glibc.malloc.hugetlb',
where setting to a value diffent than 0 enables the madvise call.
This patch issues the madvise(MADV_HUGEPAGE) call after a successful
mmap() call at sysmalloc() with sizes larger than the default huge
page size. The madvise() call is disable is system does not support
THP or if it has the mode set to "never" and on Linux only support
one page size for THP, even if the architecture supports multiple
sizes.
To test is a new rule is added tests-malloc-hugetlb1, which run the
addes tests with the required GLIBC_TUNABLE setting.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Add <tst-file-align.h> to support target specific ALIGN for variable
alignment test:
1. Alpha: Use 0x10000.
2. MicroBlaze and Nios II: Use 0x8000.
3. All others: Use 0x200000.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On Linux/x86-64, for elf/tst-align3, we now get
munmap(0x7f88f9401000, 1126424) = 0
instead of
munmap(0x7f1615200018, 544768) = -1 EINVAL (Invalid argument)
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The default has to change eventually, and there are no known failures
that require a delay.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When PT_LOAD segment alignment > the page size, allocate enough space to
ensure that the segment can be properly aligned. This change helps code
segments use huge pages become simple and available.
This fixes [BZ #28676].
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com>
This makes ld.so features such as --preload, --audit,
and --list-diagnostics more accessible to end users because they
do not need to know the ABI name of the dynamic loader.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
TLS_INIT_TCB_ALIGN is not actually used. TLS_TCB_ALIGN was likely
introduced to support a configuration where the thread pointer
has not the same alignment as THREAD_SELF. Only ia64 seems to use
that, but for the stack/pointer guard, not for storing tcbhead_t.
Some ports use TLS_TCB_OFFSET and TLS_PRE_TCB_SIZE to shift
the thread pointer, potentially landing in a different residue class
modulo the alignment, but the changes should not impact that.
In general, given that TLS variables have their own alignment
requirements, having different alignment for the (unshifted) thread
pointer and struct pthread would potentially result in dynamic
offsets, leading to more complexity.
hppa had different values before: __alignof__ (tcbhead_t), which
seems to be 4, and __alignof__ (struct pthread), which was 8
(old default) and is now 32. However, it defines THREAD_SELF as:
/* Return the thread descriptor for the current thread. */
# define THREAD_SELF \
({ struct pthread *__self; \
__self = __get_cr27(); \
__self - 1; \
})
So the thread pointer points after struct pthread (hence __self - 1),
and they have to have the same alignment on hppa as well.
Similarly, on ia64, the definitions were different. We have:
# define TLS_PRE_TCB_SIZE \
(sizeof (struct pthread) \
+ (PTHREAD_STRUCT_END_PADDING < 2 * sizeof (uintptr_t) \
? ((2 * sizeof (uintptr_t) + __alignof__ (struct pthread) - 1) \
& ~(__alignof__ (struct pthread) - 1)) \
: 0))
# define THREAD_SELF \
((struct pthread *) ((char *) __thread_self - TLS_PRE_TCB_SIZE))
And TLS_PRE_TCB_SIZE is a multiple of the struct pthread alignment
(confirmed by the new _Static_assert in sysdeps/ia64/libc-tls.c).
On m68k, we have a larger gap between tcbhead_t and struct pthread.
But as far as I can tell, the port is fine with that. The definition
of TCB_OFFSET is sufficient to handle the shifted TCB scenario.
This fixes commit 23c77f6018
("nptl: Increase default TCB alignment to 32").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Programs without dynamic dependencies and without a program
interpreter are now run via execve.
Previously, the dynamic linker either crashed while attempting to
read a non-existing dynamic segment (looking for DT_AUDIT/DT_DEPAUDIT
data), or the self-relocated in the static PIE executable crashed
because the outer dynamic linker had already applied RELRO protection.
<dl-execve.h> is needed because execve is not available in the
dynamic loader on Hurd.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Since b05fae4d8e, __minimal malloc code is used during static
startup before PIE self-relocation (_dl_relocate_static_pie).
So it requires the same fix done for other objects by 47618209d0.
Checked on aarch64, x86_64, and i686 with and without static-pie.
1. Use a temporary file to generate Makefile fragments for DSO sorting
tests and use -include on them.
2. Add Makefile fragments to postclean-generated so that a "make clean"
removes the autogenerated fragments and a subsequent "make" regenerates
them.
This partially fixes BZ #28550.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The include cleanup on dl-minimal.c removed too much for some
targets.
Also for Hurd, __sbrk is removed from localplt.data now that
tunables allocated memory through mmap.
Checked with a build for all affected architectures.
The rtld_malloc functions are moved to its own file so it can be
used on csu code. Also, the functiosn are renamed to __minimal_*
(since there are now used not only on loader code).
Using the __minimal_malloc on tunables_strdup() avoids potential
issues with sbrk() calls while processing the tunables (I see
sporadic elf/tst-dso-ordering9 on powerpc64le with different
tests failing due ASLR).
Also, using __minimal_malloc over plain mmap optimizes the memory
allocation on both static and dynamic case (since it will any unused
space in either the last page of data segments, avoiding mmap() call,
or from the previous mmap() call).
Checked on x86_64-linux-gnu, i686-linux-gnu, and powerpc64le-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Separated debuginfo files have PT_DYNAMIC with p_filesz == 0. We
need to check for that before the _dl_map_segments call because
that could attempt to write to mappings that extend beyond the end
of the file, resulting in SIGBUS.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The patch removes the the ELF_DURING_STARTUP optimization and assume
both .rel.dyn and .rel.plt might not be subsequent. This allows some
code simplification since relocation will be handled independently
where it is done on bootstrap.
At least on x86_64_64, I can not measure any performance implications.
Running 10000 time the command
LD_DEBUG=statistics ./elf/ld.so ./libc.so
And filtering the "total startup time in dynamic loader" result,
the geometric mean is:
patched master
Ryzen 7 5900x 24140 24952
i7-4510U 45957 45982
(The results do show some variation, I did not make any statistical
analysis).
It also allows build arm with lld, since it inserts ".ARM.exidx"
between ".rel.dyn" and ".rel.plt" for the loader.
Checked on x86_64-linux-gnu and arm-linux-gnueabihf.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
These tests takes the address of a protected symbol (foo_protected)
and lld does not support copy relocations on protected data symbols.
Checked on x86_64-linux-gnu.
Reviewed-by: Fangrui Song <maskray@google.com>
The global test is linked with globalmod1.so which dlopens reldepmod4.so.
Make global.out depend on reldepmod4.so. This fixes BZ #28457.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This second patch contains the actual implementation of a new sorting algorithm
for shared objects in the dynamic loader, which solves the slow behavior that
the current "old" algorithm falls into when the DSO set contains circular
dependencies.
The new algorithm implemented here is simply depth-first search (DFS) to obtain
the Reverse-Post Order (RPO) sequence, a topological sort. A new l_visited:1
bitfield is added to struct link_map to more elegantly facilitate such a search.
The DFS algorithm is applied to the input maps[nmap-1] backwards towards
maps[0]. This has the effect of a more "shallow" recursion depth in general
since the input is in BFS. Also, when combined with the natural order of
processing l_initfini[] at each node, this creates a resulting output sorting
closer to the intuitive "left-to-right" order in most cases.
Another notable implementation adjustment related to this _dl_sort_maps change
is the removing of two char arrays 'used' and 'done' in _dl_close_worker to
represent two per-map attributes. This has been changed to simply use two new
bit-fields l_map_used:1, l_map_done:1 added to struct link_map. This also allows
discarding the clunky 'used' array sorting that _dl_sort_maps had to sometimes
do along the way.
Tunable support for switching between different sorting algorithms at runtime is
also added. A new tunable 'glibc.rtld.dynamic_sort' with current valid values 1
(old algorithm) and 2 (new DFS algorithm) has been added. At time of commit
of this patch, the default setting is 1 (old algorithm).
Signed-off-by: Chung-Lin Tang <cltang@codesourcery.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is the first of a 2-part patch set that fixes slow DSO sorting behavior in
the dynamic loader, as reported in BZ #17645. In order to facilitate such a
large modification to the dynamic loader, this first patch implements a testing
framework for validating shared object sorting behavior, to enable comparison
between old/new sorting algorithms, and any later enhancements.
This testing infrastructure consists of a Python script
scripts/dso-ordering-test.py' which takes in a description language, consisting
of strings that describe a set of link dependency relations between DSOs, and
generates testcase programs and Makefile fragments to automatically test the
described situation, for example:
a->b->c->d # four objects linked one after another
a->[bc]->d;b->c # a depends on b and c, which both depend on d,
# b depends on c (b,c linked to object a in fixed order)
a->b->c;{+a;%a;-a} # a, b, c serially dependent, main program uses
# dlopen/dlsym/dlclose on object a
a->b->c;{}!->[abc] # a, b, c serially dependent; multiple tests generated
# to test all permutations of a, b, c ordering linked
# to main program
(Above is just a short description of what the script can do, more
documentation is in the script comments.)
Two files containing several new tests, elf/dso-sort-tests-[12].def are added,
including test scenarios for BZ #15311 and Redhat issue #1162810 [1].
Due to the nature of dynamic loader tests, where the sorting behavior and test
output occurs before/after main(), generating testcases to use
support/test-driver.c does not suffice to control meaningful timeout for ld.so.
Therefore a new utility program 'support/test-run-command', based on
test-driver.c/support_test_main.c has been added. This does the same testcase
control, but for a program specified through a command-line rather than at the
source code level. This utility is used to run the dynamic loader testcases
generated by dso-ordering-test.py.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1162810
Signed-off-by: Chung-Lin Tang <cltang@codesourcery.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
As noted in bug 28475, the access attribute on memfrob in <string.h>
is incorrect: the function both reads and writes the memory pointed to
by its argument, so it needs to use __read_write__, not
__write_only__. This incorrect attribute results in a build failure
for accessing uninitialized memory for s390x-linux-gnu-O3 with
build-many-glibcs.py using GCC mainline.
Correct the attribute. Fixing this shows up that some calls to
memfrob in elf/ tests are reading uninitialized memory; I'm not
entirely sure of the purpose of those calls, but guess they are about
ensuring that the stack space is indeed allocated at that point in the
function, and so it matters that they are calling a function whose
semantics are unknown to the compiler. Thus, change the first memfrob
call in those tests to use explicit_bzero instead, as suggested by
Florian in
<https://sourceware.org/pipermail/libc-alpha/2021-October/132119.html>,
to avoid the use of uninitialized memory.
Tested for x86_64, and with build-many-glibcs.py (GCC mainline) for
s390x-linux-gnu-O3.
1. Define DL_RO_DYN_SECTION to initalize bootstrap_map.l_ld_readonly
before calling elf_get_dynamic_info to get dynamic info in bootstrap_map,
2. Define a single
static inline bool
dl_relocate_ld (const struct link_map *l)
{
/* Don't relocate dynamic section if it is readonly */
return !(l->l_ld_readonly || DL_RO_DYN_SECTION);
}
This updates BZ #28340 fix.
THe d6d89608ac broke powerpc for --enable-bind-now because it turned
out that different than patch assumption rtld elf_get_dynamic_info()
does require to handle RTLD_BOOTSTRAP to avoid DT_FLAGS and
DT_RUNPATH (more specially the GLRO usage which is not reallocate
yet).
This patch fixes by passing two arguments to elf_get_dynamic_info()
to inform that by rtld (bootstrap) or static pie initialization
(static_pie_bootstrap). I think using explicit argument is way more
clear and burried C preprocessor, and compiler should remove the
dead code.
I checked on x86_64 and i686 with default options, --enable-bind-now,
and --enable-bind-now and --enable--static-pie. I also check on
aarch64, armhf, powerpc64, and powerpc with default and
--enable-bind-now.
The 4af6982e4c fix does not fully handle RTLD_BOOTSTRAP usage on
rtld.c due two issues:
1. RTLD_BOOTSTRAP is also used on dl-machine.h on various
architectures and it changes the semantics of various machine
relocation functions.
2. The elf_get_dynamic_info() change was done sideways, previously
to 490e6c62aa get-dynamic-info.h was included by the first
dynamic-link.h include *without* RTLD_BOOTSTRAP being defined.
It means that the code within elf_get_dynamic_info() that uses
RTLD_BOOTSTRAP is in fact unused.
To fix 1. this patch now includes dynamic-link.h only once with
RTLD_BOOTSTRAP defined. The ELF_DYNAMIC_RELOCATE call will now have
the relocation fnctions with the expected semantics for the loader.
And to fix 2. part of 4af6982e4c is reverted (the check argument
elf_get_dynamic_info() is not required) and the RTLD_BOOTSTRAP
pieces are removed.
To reorganize the includes the static TLS definition is moved to
its own header to avoid a circular dependency (it is defined on
dynamic-link.h and dl-machine.h requires it at same time other
dynamic-link.h definition requires dl-machine.h defitions).
Also ELF_MACHINE_NO_REL, ELF_MACHINE_NO_RELA, and ELF_MACHINE_PLT_REL
are moved to its own header. Only ancient ABIs need special values
(arm, i386, and mips), so a generic one is used as default.
The powerpc Elf64_FuncDesc is also moved to its own header, since
csu code required its definition (which would require either include
elf/ folder or add a full path with elf/).
Checked on x86_64, i686, aarch64, armhf, powerpc64, powerpc32,
and powerpc64le.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The tst-audit14, tst-audit15 and tst-audit16 tests all have audit
modules that write to stdout; the test reads from stdout to confirm
what was written. This assumes the stdout is a file which is not the
case when run over ssh.
This patch updates the tests to use a post run cmp command to compare
the output against and .exp file. This is similar to how many other
tests work and it fixes the stdout limitation. Also, this means the
test code can be greatly simplified.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Before to 490e6c62aa ('elf: Avoid nested functions in the loader
[BZ #27220]'), elf_get_dynamic_info() was defined twice on rtld.c: on
the first dynamic-link.h include and later within _dl_start(). The
former definition did not define DONT_USE_BOOTSTRAP_MAP and it is used
on setup_vdso() (since it is a global definition), while the former does
define DONT_USE_BOOTSTRAP_MAP and it is used on loader self-relocation.
With the commit change, the function is now included and defined once
instead of defined as a nested function. So rtld.c defines without
defining RTLD_BOOTSTRAP and it brokes at least powerpc32.
This patch fixes by moving the get-dynamic-info.h include out of
dynamic-link.h, which then the caller can corirectly set the expected
semantic by defining STATIC_PIE_BOOTSTRAP, RTLD_BOOTSTRAP, and/or
RESOLVE_MAP.
It also required to enable some asserts only for the loader bootstrap
to avoid issues when called from setup_vdso().
As a side note, this is another issues with nested functions: it is
not clear from pre-processed output (-E -dD) how the function will
be build and its semantic (since nested function will be local and
extra C defines may change it).
I checked on x86_64-linux-gnu (w/o --enable-static-pie),
i686-linux-gnu, powerpc64-linux-gnu, powerpc-linux-gnu-power4,
aarch64-linux-gnu, arm-linux-gnu, sparc64-linux-gnu, and
s390x-linux-gnu.
Reviewed-by: Fangrui Song <maskray@google.com>
dynamic-link.h is included more than once in some elf/ files (rtld.c,
dl-conflict.c, dl-reloc.c, dl-reloc-static-pie.c) and uses GCC nested
functions. This harms readability and the nested functions usage
is the biggest obstacle prevents Clang build (Clang doesn't support GCC
nested functions).
The key idea for unnesting is to add extra parameters (struct link_map
*and struct r_scope_elm *[]) to RESOLVE_MAP,
ELF_MACHINE_BEFORE_RTLD_RELOC, ELF_DYNAMIC_RELOCATE, elf_machine_rel[a],
elf_machine_lazy_rel, and elf_machine_runtime_setup. (This is inspired
by Stan Shebs' ppc64/x86-64 implementation in the
google/grte/v5-2.27/master which uses mixed extra parameters and static
variables.)
Future simplification:
* If mips elf_machine_runtime_setup no longer needs RESOLVE_GOTSYM,
elf_machine_runtime_setup can drop the `scope` parameter.
* If TLSDESC no longer need to be in elf_machine_lazy_rel,
elf_machine_lazy_rel can drop the `scope` parameter.
Tested on aarch64, i386, x86-64, powerpc64le, powerpc64, powerpc32,
sparc64, sparcv9, s390x, s390, hppa, ia64, armhf, alpha, and mips64.
In addition, tested build-many-glibcs.py with {arc,csky,microblaze,nios2}-linux-gnu
and riscv64-linux-gnu-rv64imafdc-lp64d.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When performing symbol lookup for references in executable without
indirect external access:
1. Disallow copy relocations in executable against protected data symbols
in a shared object with indirect external access.
2. Disallow non-zero symbol values of undefined function symbols in
executable, which are used as the function pointer, against protected
function symbols in a shared object with indirect external access.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
1. Add GNU_PROPERTY_1_NEEDED:
#define GNU_PROPERTY_1_NEEDED GNU_PROPERTY_UINT32_OR_LO
to indicate the needed properties by the object file.
2. Add GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS:
#define GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS (1U << 0)
to indicate that the object file requires canonical function pointers and
cannot be used with copy relocation.
3. Scan GNU_PROPERTY_1_NEEDED property and store it in l_1_needed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Linker creates the DT_DEBUG entry only in executables. Don't fill the
non-existent DT_DEBUG entry in ld.so with the run-time address of the
r_debug structure. This fixes BZ #28129.
The fix for bug 19329 caused a regression such that pthread_create can
deadlock when concurrent ctors from dlopen are waiting for it to finish.
Use a new GL(dl_load_tls_lock) in pthread_create that is not taken
around ctors in dlopen.
The new lock is also used in __tls_get_addr instead of GL(dl_load_lock).
The new lock is held in _dl_open_worker and _dl_close_worker around
most of the logic before/after the init/fini routines. When init/fini
routines are running then TLS is in a consistent, usable state.
In _dl_open_worker the new lock requires catching and reraising dlopen
failures that happen in the critical section.
The new lock is reinitialized in a fork child, to keep the existing
behaviour and it is kept recursive in case malloc interposition or TLS
access from signal handlers can retake it. It is not obvious if this
is necessary or helps, but avoids changing the preexisting behaviour.
The new lock may be more appropriate for dl_iterate_phdr too than
GL(dl_load_write_lock), since TLS state of an incompletely loaded
module may be accessed. If the new lock can replace the old one,
that can be a separate change.
Fixes bug 28357.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
commit ec935dea63
Author: Florian Weimer <fweimer@redhat.com>
Date: Fri Apr 24 22:31:15 2020 +0200
elf: Implement __libc_early_init
has
@@ -856,6 +876,11 @@ no more namespaces available for dlmopen()"));
/* See if an error occurred during loading. */
if (__glibc_unlikely (exception.errstring != NULL))
{
+ /* Avoid keeping around a dangling reference to the libc.so link
+ map in case it has been cached in libc_map. */
+ if (!args.libc_already_loaded)
+ GL(dl_ns)[nsid].libc_map = NULL;
+
do_dlopen calls _dl_open with nsid == __LM_ID_CALLER (-2), which calls
dl_open_worker with args.nsid = nsid. dl_open_worker updates args.nsid
if it is __LM_ID_CALLER. After dl_open_worker returns, it is wrong to
use nsid.
Replace nsid with args.nsid after dl_open_worker returns. This fixes
BZ #27609.
When add ld.so to a new namespace, we don't actually load ld.so. We
create a new link map and refers the real one for almost everything.
Copy l_addr and l_ld from the real ld.so link map to avoid GDB warning:
warning: .dynamic section for ".../elf/ld-linux-x86-64.so.2" is not at the expected address (wrong library or version mismatch?)
when handling shared library loaded by dlmopen.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add tst-ro-dynamic-mod to modules-names-nobuild to avoid
../Makerules:767: warning: ignoring old recipe for target '.../elf/tst-ro-dynamic-mod.so'
This updates BZ #28340 fix.
We can't relocate entries in dynamic section if it is readonly:
1. Add a l_ld_readonly field to struct link_map to indicate if dynamic
section is readonly and set it based on p_flags of PT_DYNAMIC segment.
2. Replace DL_RO_DYN_SECTION with dl_relocate_ld to decide if dynamic
section should be relocated.
3. Remove DL_RO_DYN_TEMP_CNT.
4. Don't use a static dynamic section to make readonly dynamic section
in vDSO writable.
5. Remove the temp argument from elf_get_dynamic_info.
This fixes BZ #28340.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Glibc does not provide an interface for debugger to access libraries
loaded in multiple namespaces via dlmopen.
The current rtld-debugger interface is described in the file:
elf/rtld-debugger-interface.txt
under the "Standard debugger interface" heading. This interface only
provides access to the first link-map (LM_ID_BASE).
1. Bump r_version to 2 when multiple namespaces are used. This triggers
the GDB bug:
https://sourceware.org/bugzilla/show_bug.cgi?id=28236
2. Add struct r_debug_extended to extend struct r_debug into a linked-list,
where each element correlates to an unique namespace.
3. Initialize the r_debug_extended structure. Bump r_version to 2 for
the new namespace and add the new namespace to the namespace linked list.
4. Add _dl_debug_update to return the address of struct r_debug' of a
namespace.
5. Add a hidden symbol, _r_debug_extended, for struct r_debug_extended.
6. Provide the symbol, _r_debug, with size of struct r_debug, as an alias
of _r_debug_extended, for programs which reference _r_debug.
This fixes BZ #15971.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
All the ports now have THREAD_GSCOPE_IN_TCB set to 1. Remove all
support for !THREAD_GSCOPE_IN_TCB, along with the definition itself.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210915171110.226187-4-bugaevc@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
While originally this definition was indeed used to distinguish between
the cases where the GSCOPE flag was stored in TCB or not, it has since
become used as a general way to distinguish between HTL and NPTL.
THREAD_GSCOPE_IN_TCB will be removed in the following commits, as HTL,
which currently is the only port that does not put the flag into TCB,
will get ported to put the GSCOPE flag into the TCB as well. To prepare
for that change, migrate all code that wants to distinguish between HTL
and NPTL to use PTHREAD_IN_LIBC instead, which is a better choice since
the distinction mostly has to do with whether libc has access to the
list of thread structures and therefore can initialize thread-local
storage.
The parts of code that actually depend on whether the GSCOPE flag is in
TCB are left unchanged.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20210907133325.255690-2-bugaevc@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Avoid triggering a false positive from valgrind by copying the terminating
null in tunables_strdup. At this point the heap is still clean, but
valgrind is stricter here.
elf/tls-macros.h was added for TLS testing when GCC did not support
__thread. __thread and tls_model attributes are mature now and have been
used by many newer tests.
Also delete tst-tls2.c which tests .tls_common (unused by modern GCC and
unsupported by Clang/LLD). .tls_common and .tbss definition are almost
identical after linking, so the runtime test doesn't add additional
coverage. Assembler and linker tests should be on the binutils side.
When LLD 13.0.0 is allowed in configure.ac
(https://sourceware.org/pipermail/libc-alpha/2021-August/129866.html),
`make check` result is on par with glibc built with GNU ld on aarch64
and x86_64.
As a future clean-up, TLS_GD/TLS_LD/TLS_IE/TLS_IE macros can be removed from
sysdeps/*/tls-macros.h. We can add optional -mtls-dialect={gnu2,trad}
tests to ensure coverage.
Tested on aarch64-linux-gnu, powerpc64le-linux-gnu, and x86_64-linux-gnu.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
We can consider __ehdr_start (from binutils 2.23 onwards)
unconditionally supported, since configure.ac requires binutils>=2.25.
The configure.ac check is related to an ia64 bug fixed by binutils 2.24.
See https://sourceware.org/pipermail/libc-alpha/2014-August/053503.html
Tested on x86_64-linux-gnu. Tested build-many-glibcs.py with
aarch64-linux-gnu and s390x-linux-gnu.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Commit 03e187a41d added a regression when an audit module does not have
libc as DT_NEEDED (although unusual it is possible).
Checked on x86_64-linux-gnu.
Remove all malloc hook uses from core malloc functions and move it
into a new library libc_malloc_debug.so. With this, the hooks now no
longer have any effect on the core library.
libc_malloc_debug.so is a malloc interposer that needs to be preloaded
to get hooks functionality back so that the debugging features that
depend on the hooks, i.e. malloc-check, mcheck and mtrace work again.
Without the preloaded DSO these debugging features will be nops.
These features will be ported away from hooks in subsequent patches.
Similarly, legacy applications that need hooks functionality need to
preload libc_malloc_debug.so.
The symbols exported by libc_malloc_debug.so are maintained at exactly
the same version as libc.so.
Finally, static binaries will no longer be able to use malloc
debugging features since they cannot preload the debugging DSO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is updated version of the 572bd547d5 (reverted by 40ebfd016a)
that fixes the _dl_next_tls_modid issues.
This issue with 572bd547d5 patch is the DTV entry will be only
update on dl_open_worker() with the update_tls_slotinfo() call after
all dependencies are being processed by _dl_map_object_deps(). However
_dl_map_object_deps() itself might call _dl_next_tls_modid(), and since
the _dl_tls_dtv_slotinfo_list::map is not yet set the entry will be
wrongly reused.
This patch fixes by renaming the _dl_next_tls_modid() function to
_dl_assign_tls_modid() and by passing the link_map so it can set
the slotinfo value so a subsequente _dl_next_tls_modid() call will
see the entry as allocated.
The intermediary value is cleared up on remove_slotinfo() for the case
a library fails to load with RTLD_NOW.
This patch fixes BZ #27135.
Checked on x86_64-linux-gnu.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
As a result, is not necessary to specify __attribute__ ((nocommon))
on individual definitions.
GCC 10 defaults to -fno-common on all architectures except ARC,
but this change is compatible with older GCC versions and ARC, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Both tests try to dlopen libm.so at runtime, so make them depend on it
so that they're executed if libm.so has been updated.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
They are no longer needed after everything has been moved into
libc. The _dl_vsym test has to be removed because the symbol
cannot be used outside libc anymore.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In dlerror_run, free corresponds to the local malloc in the
namespace, but GLRO (dl_catch_error) uses the malloc from the base
namespace. elf/tst-dlmopen-gethostbyname triggers this mismatch,
but it does not crash, presumably because of a fastbin deallocation.
Fixes commit c2059edce2 ("elf: Use
_dl_catch_error from base namespace in dl-libc.c [BZ #27646]") and
commit b2964eb1d9 ("dlfcn: Failures
after dlmopen should not terminate process [BZ #24772]").
librt.so is no longer installed for PTHREAD_IN_LIBC, and tests
are not linked against it. $(librt) is introduced globally for
shared tests that need to be linked for both PTHREAD_IN_LIBC
and !PTHREAD_IN_LIBC.
GLIBC_PRIVATE symbols that were needed during the transition are
removed again.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Previously, the installed objects were named like libc-2.33.so,
and the ABI soname libc.so.6 was just a symbolic link.
The Makefile targets to install these symbolic links are no longer
needed after this, so they are removed with this commit. The more
general $(make-link) command (which invokes scripts/rellns-sh) is
retained because other symbolic links are still needed.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@rehdat.com>
This introduces <dl-is_dso.h> and the _dl_is_dso function. A
test ensures that the official names of libc.so, ld.so, and their
versioned names are recognized.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Revert "elf: Fix DTV gap reuse logic [BZ #27135]"
This reverts commit 572bd547d5.
It turns out that the _dl_next_tls_modid in _dl_map_object_from_fd keeps
returning the same modid over and over again if there is a gap and
more than TLS-using module is loaded in one dlopen call. This corrupts
TLS data structures. The bug is still present after a revert, but
empirically it is much more difficult to trigger (because it involves a
dlopen failure).
If lib->flags (in the cache) did not match GLRO (dl_correct_cache_id),
searching for further glibc-hwcaps entries did not happen, and it
was possible that the best glibc-hwcaps was not found. By accident,
this causes a test failure for elf/tst-glibc-hwcaps-prepend-cache
on armv7l.
This commit changes the cache lookup logic to continue searching
if (a) no match has been found, (b) a named glibc-hwcaps match
has been found(), or (c) non-glibc-hwcaps match has been found
and the entry flags and cache default flags do not match.
_DL_CACHE_DEFAULT_ID is used instead of GLRO (dl_correct_cache_id)
because the latter is only written once on i386 if loading
of libc.so.5 libraries is selected, so GLRO (dl_correct_cache_id)
should probably removed in a future change.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
For the legacy ABI with supports 32-bit time_t it calls the 64-bit
time directly, since the LFS symbols calls the 64-bit time_t ones
internally.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
dlerrror_run in elf/dl-libc.c needs to call GLRO (dl_catch_error)
from the base namespace, just like the exported dlerror
implementation.
Fixes commit b2964eb1d9 ("dlfcn:
Failures after dlmopen should not terminate process [BZ #24772]").
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
