The conform/ test of stdio.h wrongly does not expect fdopen for XPG3
and XPG4. fdopen is in those standards; this patch corrects the
expectations.
Tested for x86_64 and x86.
* conform/data/stdio.h-data (fdopen): Expect also for
[XPG3 || XPG4].
The conform/ test of stdio.h for UNIX98 fails with surious namespace
errors for functions that are correctly declared for that standard.
This patch fixes the expectations to expect those functions also for
UNIX98. (This does not by itself fix the XFAIL of that test, and is
not based a full review of the header expectations so there could
still be other bugs in the expectations for this header for UNIX98.)
Tested for x86_64 and x86.
* conform/data/stdio.h-data (flockfile): Also expect for [UNIX98].
(fseeko): Likewise.
(ftello): Likewise.
(ftrylockfile): Likewise.
(funlockfile): Likewise.
(getc_unlocked): Likewise.
(getchar_unlocked): Likewise.
(putc_unlocked): Likewise.
(putchar_unlocked): Likewise.
Previously, we allocated room in the result space before the check,
leaving uninitialized data there in case the check failed.
This also consolidates the behavior between single (A or AAAA) and
dual (A and AAAA in parallel) queries. Single queries checked
the record length against the QTYPE, not the RRTYPE.
The conformtest expectations for signal.h have various declarations
that are expected for POSIX (1996) and all later standards, except,
wrongly, for XOPEN2K. This shows up as failures of tests for two
other headers, which are allowed to make visible symbols from
signal.h, because of an incorrect namespace failure for sigval
(required in signal.h in XOPEN2K, so should be allowed for those other
headers); signal.h tests for various standards fail anyway because of
other problems in the header. This patch fixes the incorrect
expectations and removes the two XFAILs that this fixes.
Tested for x86_64 and x86.
* conform/data/signal.h-data (union sigval): Expect also if
[XOPEN2K].
(struct sigevent): Likewise.
(SIGEV_NONE): Likewise.
(SIGEV_SIGNAL): Likewise.
(SIGEV_THREAD): Likewise.
(SIGRTMIN): Likewise.
(SIGRTMAX): Likewise.
* conform/Makefile (test-xfail-XOPEN2K/aio.h/conform): Remove
variable.
(test-xfail-XOPEN2K/mqueue.h/conform): Likewise.
In various error scenarios (for example, if the server closes the
TCP connection before sending the full response), send_vc can return
without resetting the *resplen2 value. This can pass uninitialized
or unexpected data to the caller.
this patch adds the missing SOL_IUCV socket level definition
and socket options SO_IPRMDATA_MSG, SO_MSGLIMIT, SO_MSGSIZE
which can be used with get/setsockopt().
SCM_IUCV_TRGCLS is needed to send/receive ancillary data with send/recvmsg().
The defines are copied from kernel-source:
include/net/iucv/af_iucv.h
include/linux/socket.h
Some of the newer symbols we're using are missing translit entries which
causes troubles when generating the locales with older encodings.
tr_TR: ₺ -> "TL"
uz_UZ: ʻ -> "'"
common:
֏ -> "AMD"
₪ -> "ILS"
₱ -> "PHP"
₸ -> "KZT"
₾ -> "GEL"
Current GLIBC fmemopen fails with a simple testcase:
char buffer[500] = "x";
FILE *stream;
stream = fmemopen(buffer, 500, "r+");
fwrite("fish",sizeof(char),5,stream);
printf("pos-1:%ld\n",ftell(stream));
fflush(stream);
printf("pos-2:%ld\n",ftell(stream));
It returns:
pos-1:5
pos-2:0
Where it should return:
pos-1:5
pos-2:5
This is due the internal write function does not correctly update the internal
object position state and then the seek operation returns a wrong value. This
patch fixes it.
It fixes both BZ #20005 and BZ #19230 (marked as duplicated). A new test is
added to check for such case.
Tested on x86_64 and i686.
* libio/fmemopen.c (fmemopen_write): Update internal position after
write.
* stdio-common/Makefile (tests): Add tst-fmemopen4.c.
* stdio-common/tst-fmemopen4.c: New file..
langinfo.h declares nl_langinfo_l if __USE_XOPEN2K. But this function
was new in the 2008 edition of POSIX. This patch fixes the condition
accordingly.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #19996]
* locale/langinfo.h (nl_langinfo_l): Declare if [__USE_XOPEN2K8],
not [__USE_XOPEN2K].
* conform/Makefile (test-xfail-XOPEN2K/langinfo.h/conform): Remove
variable.
The conform/ test expectations for stdarg.h were wrongly missing an
expectation of va_copy for XOPEN2K (based on C99, so including that
macro). This patch fixes this.
Tested for x86_64 and x86.
* conform/data/stdarg.h-data [XOPEN2K] (va_copy): Require macro.
* conform/Makefile (test-xfail-XOPEN2K/stdarg.h/conform): Remove
variable.
The header conformance test for stdio.h for XOPEN2K fails because the
header does not define the off_t type, used in the expected
declarations for fseeko and ftello.
The absence of this type is not actually strictly a bug (hence no bug
report being filed in Bugzilla), since POSIX didn't require the type
to be declared in this header until the 2008 edition. However, the
glibc convention in such cases - where the type falls under the
general *_t POSIX reservation, and so it's OK to define it for all
POSIX versions - is to make the headers self-contained in this regard
even for the older POSIX versions not requiring the type to be defined
despite including other declarations depending on the type. Thus,
this patch adjusts the condition in the header and removes the XFAIL
(rather than adapting the expectation to work when the functions are
declared using __off_t without off_t being defined).
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* libio/stdio.h (off_t): Define if [__USE_XOPEN2K], not
[__USE_XOPEN2K8].
[__USE_LARGEFILE64] (off64_t): Likewise.
* conform/Makefile (test-xfail-XOPEN2K/stdio.h/conform): Remove
variable.
stdio.h declares cuserid if __USE_XOPEN. But this was removed in the
2001 edition of POSIX.
The #endif comment "Use X/Open, but not issue 6." reflects the correct
logic, but does not correspond to the #ifdef. The use of a correct
libc-hacker. The online archives for libc-hacker in August 2000 are
broken, but the messages can be found in the qmail archives in
/sourceware1/qmail/lists-sourceware/libc-hacker/archive/26 if you have
shell access to sourceware.
The issue showed up in August 2000 because of a warning about a
non-prototype definition in sysdeps/posix/cuserid.c when there was no
previous prototype declaration. Since we've now eliminated
non-prototype function definitions, that issue does not apply. The
other points from that discussion were about whether it should be
included in _GNU_SOURCE; whether _GNU_SOURCE should include
"everything"; whether deprecated interfaces such as this should be
excluded from it; and whether, even given exclusion of deprecated
interfaces, it should apply for deprecations in a version of POSIX
that at that time had not been released.
This patch follows the more conservative approach to a fix of keeping
the interface in _GNU_SOURCE. That matches how L_cuserid is handled.
I think there is a strong case for eliminating this interface from
_GNU_SOURCE (but this may not automatically be the case for every
interface removed in newer POSIX versions), but then L_cuserid should
also be removed from _GNU_SOURCE (in stdio-common/stdio_lim.h.in) at
the same time.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #19989]
* libio/stdio.h (cuserid): Do not declare if
[__USE_XOPEN2K && !__USE_GNU].
* conform/Makefile (test-xfail-XOPEN2K8/stdio.h/conform): Remove
variable.
RFC2292 macros were obsoleted by RFC3542, and should not be exposed
any more. Notably since IPV6_PKTINFO has been reintroduced with a
completely different API.
* bits/in.h (IPV6_PKTINFO): Rename to IPV6_2292PKTINFO.
(IPV6_HOPOPTS): Rename to IPV6_2292HOPOPTS.
(IPV6_DSTOPTS): Rename to IPV6_2292DSTOPTS.
(IPV6_RTHDR): Rename to IPV6_2292RTHDR.
(IPV6_PKTOPTIONS): Rename to IPV6_2292PKTOPTIONS.
(IPV6_HOPLIMIT): Rename to IPV6_2292HOPLIMIT.
(IPV6_RECVPKTINFO): New macro.
(IPV6_PKTINFO): New macro.
The current test code doesn't check the return value of malloc.
This should rarely (if ever) cause a problem, but rather than add
some return value checks, just statically allocate the buffer on
the stack. This will never fail (or if it does, we've got much
bigger problems that don't matter to the test).
__libc_memalign in ld.so allocates one page at a time and tries to
optimize consecutive __libc_memalign calls by hoping that the next
mmap is after the current memory allocation.
However, the kernel hands out mmap addresses in top-down order, so
this optimization in practice never happens, with the result that we
have more mmap calls and waste a bunch of space for each __libc_memalign.
This change makes __libc_memalign to mmap one page extra. Worst case,
the kernel never puts a backing page behind it, but best case it allows
__libc_memalign to operate much much better. For elf/tst-align --direct,
it reduces number of mmap calls from 12 to 9.
* elf/dl-minimal.c (__libc_memalign): Mmap one extra page.
The yes/no strings should be based on the dictionary words. That means
they are capitalized based on the dictionary rather than position in the
sentence (e.g. the first word).
bo_CN: nostr: changing མེན to མིན།
bo_CN: yesstr: changing ཨིན to ཡིན།
dz_BT: nostr: changing མེན to མེན་
dz_BT: yesstr: changing ཨིན to ཨིན་
en_CA: yesstr: changing Yes to yes
en_CA: nostr: changing No to no
en_US: yesstr: changing Yes to yes
en_US: nostr: changing No to no
es_ES: nostr: changing No to no
es_ES: yesstr: changing Si to sí
fi_FI: nostr: changing Ei to ei
fi_FI: yesstr: changing Kyllä to kyllä
ig_NG: yesstr: changing Ee to Eye
ko_KR: nostr: changing 아니오 to 아니요
ky_KG: nostr: changing Жок to жок
ky_KG: yesstr: changing Ооба to ооба
ms_MY: nostr: changing Tidak to tidak
ms_MY: yesstr: changing Ya to ya
te_IN: nostr: changing కాదు to వద్దు
te_IN: yesstr: changing అవను to అవును
ur_PK: nostr: changing نهيں to نہیں
ur_PK: yesstr: changing بلكل to ہاں
uz_UZ: nostr: changing Yo'q to yo‘q
uz_UZ: yesstr: changing Ha to ha
uz_UZ@cyrillic: nostr: changing Йўқ to йўқ
uz_UZ@cyrillic: yesstr: changing Ҳа to ҳа
wae_CH: nostr: changing Nei to nei
wae_CH: yesstr: changing Ja to ja
yo_NG: nostr: changing Bẹ́ẹ̀ kọ́ to Bẹ́ẹ̀kọ́
yo_NG: yesstr: changing Bẹ́ẹ̀ ni to Bẹ́ẹ̀ni
Some of the translations were just wrong.
el_GR: nostr: changing no to όχι
el_GR: yesstr: changing yes to ναι
km_KH: nostr: changing no:NO:n:N to ទេ៖ n
km_KH: yesstr: changing yes:YES:y:Y to បាទ/ចាស៖ y
ug_CN: nostr: changing No to ياق
ug_CN: yesstr: changing Yes to ھەئە
Add missing translations for a number of locales:
af_ZA: nostr: setting to nee
af_ZA: yesstr: setting to ja
am_ET: nostr: setting to አይ
am_ET: yesstr: setting to አዎን
ast_ES: nostr: setting to non
ast_ES: yesstr: setting to sí
be_BY: nostr: setting to не
be_BY: yesstr: setting to так
bem_ZM: nostr: setting to Awe
bem_ZM: yesstr: setting to Ee
bg_BG: nostr: setting to не
bg_BG: yesstr: setting to да
brx_IN: nostr: setting to नहीं
brx_IN: yesstr: setting to हाँ
bs_BA: nostr: setting to ne
bs_BA: yesstr: setting to da
ca_ES: nostr: setting to no
ca_ES: yesstr: setting to sí
da_DK: nostr: setting to nej
da_DK: yesstr: setting to ja
de_DE: nostr: setting to nein
de_DE: yesstr: setting to ja
en_DK: nostr: setting to yes
en_DK: yesstr: setting to no
et_EE: nostr: setting to ei
et_EE: yesstr: setting to jah
eu_ES: nostr: setting to ez
eu_ES: yesstr: setting to bai
fa_IR: nostr: setting to نه
fa_IR: yesstr: setting to بله
ff_SN: nostr: setting to Alaa
ff_SN: yesstr: setting to Eey
fo_FO: nostr: setting to nei
fo_FO: yesstr: setting to já
fr_BE: nostr: setting to non
fr_BE: yesstr: setting to oui
fr_CH: nostr: setting to non
fr_CH: yesstr: setting to oui
fr_FR: nostr: setting to non
fr_FR: yesstr: setting to oui
fr_LU: nostr: setting to non
fr_LU: yesstr: setting to oui
fur_IT: nostr: setting to no
fur_IT: yesstr: setting to sì
fy_DE: nostr: setting to nee
fy_DE: yesstr: setting to ja
ga_IE: nostr: setting to níl
ga_IE: yesstr: setting to tá
gd_GB: nostr: setting to chan eil
gd_GB: yesstr: setting to tha
gl_ES: nostr: setting to non
gl_ES: yesstr: setting to si
gu_IN: nostr: setting to નહીં
gu_IN: yesstr: setting to હા
he_IL: nostr: setting to לא
he_IL: yesstr: setting to כן
hi_IN: nostr: setting to नहीं
hi_IN: yesstr: setting to हाँ
hr_HR: nostr: setting to ne
hr_HR: yesstr: setting to da
hu_HU: nostr: setting to nem
hu_HU: yesstr: setting to igen
id_ID: nostr: setting to tidak
id_ID: yesstr: setting to ya
is_IS: nostr: setting to nei
is_IS: yesstr: setting to já
it_CH: nostr: setting to no
it_CH: yesstr: setting to sì
it_IT: nostr: setting to no
it_IT: yesstr: setting to sì
ka_GE: nostr: setting to არა
ka_GE: yesstr: setting to კი
kk_KZ: nostr: setting to жоқ
kk_KZ: yesstr: setting to иә
kl_GL: nostr: setting to naagga
kl_GL: yesstr: setting to aap
kn_IN: nostr: setting to ಇಲ್ಲ
kn_IN: yesstr: setting to ಹೌದು
ko_KR: yesstr: setting to 예
lb_LU: nostr: setting to nee
lb_LU: yesstr: setting to jo
lg_UG: nostr: setting to Nedda
lg_UG: yesstr: setting to Ye
lt_LT: nostr: setting to ne
lt_LT: yesstr: setting to taip
lv_LV: nostr: setting to nē
lv_LV: yesstr: setting to jā
mg_MG: nostr: setting to Tsia
mg_MG: yesstr: setting to Eny
mn_MN: nostr: setting to үгүй
mn_MN: yesstr: setting to тийм
mr_IN: nostr: setting to नाहीःना
mr_IN: yesstr: setting to होयःहो
mt_MT: nostr: setting to le
mt_MT: yesstr: setting to iva
nb_NO: nostr: setting to nei
nb_NO: yesstr: setting to ja
ne_NP: nostr: setting to होइन
ne_NP: yesstr: setting to हो
nl_NL: nostr: setting to nee
nl_NL: yesstr: setting to ja
nn_NO: nostr: setting to nei
nn_NO: yesstr: setting to ja
or_IN: nostr: setting to ନା
or_IN: yesstr: setting to ହଁ
os_RU: nostr: setting to нӕйы
os_RU: yesstr: setting to уойы
pa_IN: nostr: setting to ਨਹੀਂ
pa_IN: yesstr: setting to ਹਾਂ
pl_PL: nostr: setting to nie
pl_PL: yesstr: setting to tak
pt_BR: nostr: setting to não
pt_BR: yesstr: setting to sim
pt_PT: nostr: setting to não
pt_PT: yesstr: setting to sim
ro_RO: nostr: setting to nu
ro_RO: yesstr: setting to da
ru_RU: nostr: setting to нет
ru_RU: yesstr: setting to да
ru_UA: nostr: setting to нет
ru_UA: yesstr: setting to да
se_NO: nostr: setting to ii
se_NO: yesstr: setting to jo
sl_SI: nostr: setting to ne
sl_SI: yesstr: setting to da
so_DJ: nostr: setting to maya
so_DJ: yesstr: setting to haa
so_SO: nostr: setting to maya
so_SO: yesstr: setting to haa
sq_AL: nostr: setting to jo
sq_AL: yesstr: setting to po
sr_RS@latin: nostr: setting to ne
sr_RS@latin: yesstr: setting to da
sr_RS: nostr: setting to не
sr_RS: yesstr: setting to да
sv_SE: nostr: setting to nej
sv_SE: yesstr: setting to ja
sw_KE: nostr: setting to Hapana
sw_KE: yesstr: setting to Ndiyo
yue_HK: nostr: setting to 唔係
yue_HK: yesstr: setting to 係
zu_ZA: nostr: setting to cha
zu_ZA: yesstr: setting to yebo
The vast majority of languages include yY/nN in their yes/no regexes.
Standardize the few that were missing them.
ms_MY: noexpr: add nN
nan_TW@latin: yesexpr: add yY
nan_TW@latin: noexpr: add nN
se_NO: noexpr: add nN
This also highlighted a few that were incorrectly using yY/nN because
they clashed with their localized messages:
uz_UZ: yesexpr: change ^[+1YyHh] to ^[+1ҲҳHh]
uz_UZ: noexpr: change ^[-0JjNn] to ^[-0ЙйNnYyJj]
uz_UZ@cyrillic: yesexpr: change ^[+1ҲҳYy] to ^[+1ҲҳHh]
uz_UZ@cyrillic: noexpr: change ^[-0ЙйNn] to [-0ЙйNnYyJj]
yo_NG: move nN (short for Bẹ́ẹ̀ni) from noexpr to yesexpr
A handful of regexes were allowing +1 for yesexpr and -0 for noexpr,
and it's the i18n definition. Standardize all locales by allowing
these language-independent values in them.
Example change for en_US goes from ^[yY] to ^[+1yY], and from ^[nN]
to ^[-0nN].
Tweak some of the collation settings for a few characters.
Add/update various fields:
LC_MESSAGES
yesstr: set to иә
nostr: set to жоқ
LC_MONETARY
mon_decimal_point: change . to ,
mon_thousands_sep: change to a non-breaking space
p_sep_by_space: change 1 to 2
set int_{p,n}_* fields
LC_NUMERIC
thousands_sep: change , to a non-breaking space
LC_TIME
abday: change saturday from Сн to Сб
LC_TELEPHONE
tel_dom_fmt: set to (%A) %l
int_select: set to 8~10
LC_ADDRESS:
country_post: set to KAZ
country_ab2: set to KZ
country_ab3: set to KAZ
country_isbn: set to 978-601
lang_name: set to қазақ тілі
The ISO 14652/30112 specs say the defaults for the week keyword are:
7, 19971130, 7
The localedef has been using those defaults for the first two, but
0 for the last one.
I've spot checked a number of these, including some that were def
wrong (like ff_SN). It also fixes all open week-related bugs.
Since ff_SN is the only one that changes its base date, I also made
sure that its ordering of day translations were correct. Looks like
another case Petr brought up where the week field was not actually
checked against the day arrays.
I also took the opportunity to drop first_weekday/first_workday when
the value aligned with the defaults (1 & 2 respectively). This didn't
impact too many locales In practice because the majority omitted them
already.
A few locales were defining some values incorrectly for their region:
ak_GH: week: changing [7, 19971130, 7] to [7, 19971130, 1]
ak_GH: first_weekday: changing 1 to 2
ayc_PE: week: changing [7, 19971130, 7] to [7, 19971130, 1]
bem_ZM: week: changing [7, 19971130, 4] to [7, 19971130, 1]
bem_ZM: first_weekday: changing 1 to 2
en_IE: first_weekday: changing 2 to 1
en_US: week: changing [7, 19971130, 7] to [7, 19971130, 1]
es_CO: first_weekday: changing 2 to 1
es_ES: week: changing [7, 19971130, 5] to [7, 19971130, 4]
ff_SN: week: changing [7, 19971129, 1] to [7, 19971130, 1]
ff_SN: first_weekday: changing 1 to 2
ga_IE: first_weekday: changing 2 to 1
ht_HT: week: changing [7, 19971130, 7] to [7, 19971130, 1]
ht_HT: first_weekday: changing 1 to 2
mk_MK: week: changing [7, 19971130, 4] to [7, 19971130, 1]
mt_MT: first_weekday: changing 2 to 1
quz_PE: week: changing [7, 19971130, 7] to [7, 19971130, 1]
sr_ME: week: changing [7, 19971130, 4] to [7, 19971130, 1]
sr_RS: week: changing [7, 19971130, 4] to [7, 19971130, 1]
sr_RS@latin: week: changing [7, 19971130, 4] to [7, 19971130, 1]
sw_KE: week: changing [7, 19971130, 4] to [7, 19971130, 1]
sw_KE: first_weekday: changing 2 to 1
uk_UA: week: changing [7, 19971130, 4] to [7, 19971130, 1]
unm_US: week: changing [7, 19971130, 4] to [7, 19971130, 1]
Some locales were copying locales that had the wrong week settings, so
that content had to be duplicated so the values could be adjusted:
el_CY: week: setting to [7, 19971130, 1]
en_AG: week: setting to [7, 19971130, 1]
en_AG: first_weekday: changing 2 to 1
en_ZM: week: setting to [7, 19971130, 1]
es_CU: week: setting to [7, 19971130, 1]
nl_AW: week: setting to [7, 19971130, 1]
sw_TZ: first_weekday: setting to 2
ta_LK: first_weekday: setting to 2
The majority of locales were omitting the week field thus getting the
default [7, 19971130, 0 (localedef) / 7 (ISO standard)]. Unfortunately,
neither of those are used by any locales, so we end up having to define
the field just to se the ndays field. In practice, this rarely matters
due to it usage, and the first two fields match the defaults.
aa_DJ: setting to [7, 19971130, 1]
aa_ER: setting to [7, 19971130, 1]
aa_ER@saaho: setting to [7, 19971130, 1]
aa_ET: setting to [7, 19971130, 1]
af_ZA: setting to [7, 19971130, 1]
am_ET: setting to [7, 19971130, 1]
an_ES: setting to [7, 19971130, 4]
anp_IN: setting to [7, 19971130, 1]
ar_AE: setting to [7, 19971130, 1]
ar_BH: setting to [7, 19971130, 1]
ar_DZ: setting to [7, 19971130, 1]
ar_EG: setting to [7, 19971130, 1]
ar_IN: setting to [7, 19971130, 1]
ar_IQ: setting to [7, 19971130, 1]
ar_JO: setting to [7, 19971130, 1]
ar_KW: setting to [7, 19971130, 1]
ar_LB: setting to [7, 19971130, 1]
ar_LY: setting to [7, 19971130, 1]
ar_MA: setting to [7, 19971130, 1]
ar_OM: setting to [7, 19971130, 1]
ar_QA: setting to [7, 19971130, 1]
ar_SA: setting to [7, 19971130, 1]
ar_SD: setting to [7, 19971130, 1]
ar_SS: setting to [7, 19971130, 1]
ar_SY: setting to [7, 19971130, 1]
ar_TN: setting to [7, 19971130, 1]
ar_YE: setting to [7, 19971130, 1]
as_IN: setting to [7, 19971130, 1]
ast_ES: setting to [7, 19971130, 4]
az_AZ: setting to [7, 19971130, 1]
be_BY: setting to [7, 19971130, 1]
be_BY@latin: setting to [7, 19971130, 1]
ber_DZ: setting to [7, 19971130, 1]
ber_MA: setting to [7, 19971130, 1]
bg_BG: setting to [7, 19971130, 4]
bhb_IN: setting to [7, 19971130, 1]
bho_IN: setting to [7, 19971130, 1]
bn_BD: setting to [7, 19971130, 1]
bn_IN: setting to [7, 19971130, 1]
bo_CN: setting to [7, 19971130, 1]
br_FR: setting to [7, 19971130, 4]
brx_IN: setting to [7, 19971130, 1]
bs_BA: setting to [7, 19971130, 1]
byn_ER: setting to [7, 19971130, 1]
ca_AD: setting to [7, 19971130, 4]
ca_ES: setting to [7, 19971130, 4]
ca_ES@euro: setting to [7, 19971130, 4]
ca_FR: setting to [7, 19971130, 4]
ca_IT: setting to [7, 19971130, 4]
ce_RU: setting to [7, 19971130, 1]
cmn_TW: setting to [7, 19971130, 1]
crh_UA: setting to [7, 19971130, 1]
cv_RU: setting to [7, 19971130, 1]
cy_GB: setting to [7, 19971130, 4]
de_BE: setting to [7, 19971130, 4]
de_LU: setting to [7, 19971130, 4]
doi_IN: setting to [7, 19971130, 1]
dv_MV: setting to [7, 19971130, 1]
dz_BT: setting to [7, 19971130, 1]
el_GR: setting to [7, 19971130, 4]
el_GR@euro: setting to [7, 19971130, 4]
en_AU: setting to [7, 19971130, 1]
en_BW: setting to [7, 19971130, 1]
en_CA: setting to [7, 19971130, 1]
en_HK: setting to [7, 19971130, 1]
en_IE: setting to [7, 19971130, 4]
en_IN: setting to [7, 19971130, 1]
en_NG: setting to [7, 19971130, 1]
en_NZ: setting to [7, 19971130, 1]
en_PH: setting to [7, 19971130, 1]
en_SG: setting to [7, 19971130, 1]
en_ZA: setting to [7, 19971130, 1]
en_ZW: setting to [7, 19971130, 1]
es_AR: setting to [7, 19971130, 1]
es_BO: setting to [7, 19971130, 1]
es_CL: setting to [7, 19971130, 1]
es_CO: setting to [7, 19971130, 1]
es_CR: setting to [7, 19971130, 1]
es_DO: setting to [7, 19971130, 1]
es_EC: setting to [7, 19971130, 1]
es_ES@euro: setting to [7, 19971130, 4]
es_GT: setting to [7, 19971130, 1]
es_HN: setting to [7, 19971130, 1]
es_MX: setting to [7, 19971130, 1]
es_NI: setting to [7, 19971130, 1]
es_PA: setting to [7, 19971130, 1]
es_PE: setting to [7, 19971130, 1]
es_PR: setting to [7, 19971130, 1]
es_PY: setting to [7, 19971130, 1]
es_SV: setting to [7, 19971130, 1]
es_US: setting to [7, 19971130, 1]
es_UY: setting to [7, 19971130, 1]
es_VE: setting to [7, 19971130, 1]
eu_ES: setting to [7, 19971130, 4]
fa_IR: setting to [7, 19971130, 1]
fil_PH: setting to [7, 19971130, 1]
fo_FO: setting to [7, 19971130, 4]
fr_CA: setting to [7, 19971130, 1]
fr_CH: setting to [7, 19971130, 4]
fr_LU: setting to [7, 19971130, 4]
fy_NL: setting to [7, 19971130, 4]
ga_IE: setting to [7, 19971130, 4]
gd_GB: setting to [7, 19971130, 4]
gez_ER: setting to [7, 19971130, 1]
gez_ET: setting to [7, 19971130, 1]
gl_ES: setting to [7, 19971130, 4]
gu_IN: setting to [7, 19971130, 1]
gv_GB: setting to [7, 19971130, 4]
hak_TW: setting to [7, 19971130, 1]
ha_NG: setting to [7, 19971130, 1]
he_IL: setting to [7, 19971130, 1]
hi_IN: setting to [7, 19971130, 1]
hne_IN: setting to [7, 19971130, 1]
hr_HR: setting to [7, 19971130, 1]
hy_AM: setting to [7, 19971130, 1]
id_ID: setting to [7, 19971130, 1]
ig_NG: setting to [7, 19971130, 1]
ik_CA: setting to [7, 19971130, 1]
is_IS: setting to [7, 19971130, 4]
it_CH: setting to [7, 19971130, 4]
it_IT: setting to [7, 19971130, 4]
it_IT@euro: setting to [7, 19971130, 4]
iu_CA: setting to [7, 19971130, 1]
ja_JP: setting to [7, 19971130, 1]
ka_GE: setting to [7, 19971130, 1]
kk_KZ: setting to [7, 19971130, 1]
kl_GL: setting to [7, 19971130, 1]
km_KH: setting to [7, 19971130, 1]
kn_IN: setting to [7, 19971130, 1]
kok_IN: setting to [7, 19971130, 1]
ko_KR: setting to [7, 19971130, 1]
ks_IN: setting to [7, 19971130, 1]
ks_IN@devanagari: setting to [7, 19971130, 1]
ku_TR: setting to [7, 19971130, 1]
kw_GB: setting to [7, 19971130, 4]
ky_KG: setting to [7, 19971130, 1]
lg_UG: setting to [7, 19971130, 1]
lij_IT: setting to [7, 19971130, 4]
lo_LA: setting to [7, 19971130, 1]
lt_LT: setting to [7, 19971130, 4]
lv_LV: setting to [7, 19971130, 1]
lzh_TW: setting to [7, 19971130, 1]
mag_IN: setting to [7, 19971130, 1]
mai_IN: setting to [7, 19971130, 1]
mg_MG: setting to [7, 19971130, 1]
mhr_RU: setting to [7, 19971130, 1]
mi_NZ: setting to [7, 19971130, 1]
ml_IN: setting to [7, 19971130, 1]
mni_IN: setting to [7, 19971130, 1]
mn_MN: setting to [7, 19971130, 1]
mr_IN: setting to [7, 19971130, 1]
ms_MY: setting to [7, 19971130, 1]
mt_MT: setting to [7, 19971130, 1]
my_MM: setting to [7, 19971130, 1]
nan_TW: setting to [7, 19971130, 1]
nan_TW@latin: setting to [7, 19971130, 1]
ne_NP: setting to [7, 19971130, 1]
nhn_MX: setting to [7, 19971130, 1]
niu_NU: setting to [7, 19971130, 1]
niu_NZ: setting to [7, 19971130, 1]
nl_BE: setting to [7, 19971130, 4]
nl_BE@euro: setting to [7, 19971130, 4]
nr_ZA: setting to [7, 19971130, 1]
nso_ZA: setting to [7, 19971130, 1]
oc_FR: setting to [7, 19971130, 4]
om_ET: setting to [7, 19971130, 1]
om_KE: setting to [7, 19971130, 1]
or_IN: setting to [7, 19971130, 1]
os_RU: setting to [7, 19971130, 1]
pa_IN: setting to [7, 19971130, 1]
pap_AW: setting to [7, 19971130, 1]
pap_CW: setting to [7, 19971130, 1]
pa_PK: setting to [7, 19971130, 1]
ps_AF: setting to [7, 19971130, 1]
pt_BR: setting to [7, 19971130, 1]
pt_PT: setting to [7, 19971130, 4]
pt_PT@euro: setting to [7, 19971130, 4]
raj_IN: setting to [7, 19971130, 1]
ro_RO: setting to [7, 19971130, 1]
ru_RU: setting to [7, 19971130, 1]
ru_UA: setting to [7, 19971130, 1]
rw_RW: setting to [7, 19971130, 1]
sa_IN: setting to [7, 19971130, 1]
sat_IN: setting to [7, 19971130, 1]
sd_IN: setting to [7, 19971130, 1]
sd_IN@devanagari: setting to [7, 19971130, 1]
se_NO: setting to [7, 19971130, 4]
shs_CA: setting to [7, 19971130, 1]
sid_ET: setting to [7, 19971130, 1]
si_LK: setting to [7, 19971130, 1]
sl_SI: setting to [7, 19971130, 1]
so_DJ: setting to [7, 19971130, 1]
so_ET: setting to [7, 19971130, 1]
so_KE: setting to [7, 19971130, 1]
so_SO: setting to [7, 19971130, 1]
sq_AL: setting to [7, 19971130, 1]
ss_ZA: setting to [7, 19971130, 1]
st_ZA: setting to [7, 19971130, 1]
sv_FI: setting to [7, 19971130, 4]
sv_SE: setting to [7, 19971130, 4]
ta_IN: setting to [7, 19971130, 1]
tcy_IN: setting to [7, 19971130, 1]
te_IN: setting to [7, 19971130, 1]
tg_TJ: setting to [7, 19971130, 1]
the_NP: setting to [7, 19971130, 1]
th_TH: setting to [7, 19971130, 1]
ti_ER: setting to [7, 19971130, 1]
ti_ET: setting to [7, 19971130, 1]
tig_ER: setting to [7, 19971130, 1]
tk_TM: setting to [7, 19971130, 1]
tl_PH: setting to [7, 19971130, 1]
tn_ZA: setting to [7, 19971130, 1]
tr_CY: setting to [7, 19971130, 1]
tr_TR: setting to [7, 19971130, 1]
ts_ZA: setting to [7, 19971130, 1]
tt_RU: setting to [7, 19971130, 1]
tt_RU@iqtelif: setting to [7, 19971130, 1]
ug_CN: setting to [7, 19971130, 1]
ur_IN: setting to [7, 19971130, 1]
ur_PK: setting to [7, 19971130, 1]
uz_UZ: setting to [7, 19971130, 1]
uz_UZ@cyrillic: setting to [7, 19971130, 1]
ve_ZA: setting to [7, 19971130, 1]
vi_VN: setting to [7, 19971130, 1]
wa_BE: setting to [7, 19971130, 4]
wal_ET: setting to [7, 19971130, 1]
wo_SN: setting to [7, 19971130, 1]
xh_ZA: setting to [7, 19971130, 1]
yi_US: setting to [7, 19971130, 1]
yo_NG: setting to [7, 19971130, 1]
yue_HK: setting to [7, 19971130, 1]
zh_CN: setting to [7, 19971130, 1]
zh_HK: setting to [7, 19971130, 1]
zh_SG: setting to [7, 19971130, 1]
zh_TW: setting to [7, 19971130, 1]
zu_ZA: setting to [7, 19971130, 1]
Finally, set first_weekday in all the locales that were omitting it
and wanted something other than the default of 1.
aa_DJ: setting to 7
aa_ER: setting to 2
aa_ER@saaho: setting to 2
ar_AE: setting to 7
ar_BH: setting to 7
ar_DZ: setting to 7
ar_EG: setting to 7
ar_IQ: setting to 7
ar_JO: setting to 7
ar_KW: setting to 7
ar_LB: setting to 2
ar_LY: setting to 7
ar_MA: setting to 7
ar_OM: setting to 7
ar_QA: setting to 7
ar_SD: setting to 7
ar_SS: setting to 2
ar_SY: setting to 7
az_AZ: setting to 2
be_BY: setting to 2
be_BY@latin: setting to 2
ber_DZ: setting to 7
ber_MA: setting to 7
bn_BD: setting to 6
bs_BA: setting to 2
byn_ER: setting to 2
dv_MV: setting to 6
en_NG: setting to 2
es_BO: setting to 2
es_CL: setting to 2
es_EC: setting to 2
es_UY: setting to 2
fo_FO: setting to 2
fr_CH: setting to 2
gd_GB: setting to 2
gez_ER: setting to 2
ha_NG: setting to 2
hr_HR: setting to 2
hy_AM: setting to 2
ig_NG: setting to 2
is_IS: setting to 2
it_CH: setting to 2
ka_GE: setting to 2
kk_KZ: setting to 2
kl_GL: setting to 2
ku_TR: setting to 2
ky_KG: setting to 2
lg_UG: setting to 2
mg_MG: setting to 2
mn_MN: setting to 2
ms_MY: setting to 2
niu_NU: setting to 2
pap_AW: setting to 2
pap_CW: setting to 2
pt_PT: setting to 2
pt_PT@euro: setting to 2
rw_RW: setting to 2
se_NO: setting to 2
si_LK: setting to 2
so_DJ: setting to 7
so_SO: setting to 2
sq_AL: setting to 2
tg_TJ: setting to 2
ti_ER: setting to 2
tig_ER: setting to 2
tk_TM: setting to 2
tt_RU: setting to 2
tt_RU@iqtelif: setting to 2
uz_UZ: setting to 2
uz_UZ@cyrillic: setting to 2
vi_VN: setting to 2
wo_SN: setting to 2
yo_NG: setting to 2
This patch optimizes strcasestr function for power >= 8 systems. The average
improvement of this optimization is ~40% and compares 16 bytes at a time
using vector instructions. This patch is tested on powerpc64 and powerpc64le.
This patch adds full support for cross-building benchmarks. Some
benchmarks like those that need locales to be generated cannot be
built and are hence skipped for cross builds.
Tested by cross building for aarch64 on x86_64 and then running the
generated benchmark on aarch64.
* benchtests/Makefile (wcsmbs-benchset): Include only for
native builds and runs.
(LOCALES): Likewise.
(bench-build): Build timing-type here instead of the bench
target. Generate locale only for native builds.
* benchtests/README: Add note for cross-building.
For situations where we are cross-building or where we want to avoid
building on the target system, we want a way to only build benchmarks
and then copy them over to the target system to run them. I have also
added a simple enhancement for the 'bench' target where all benchmark
binaries are built and then the benchmarks executed.
Tested on arm.
Makefile.in (bench-build): New target.
Rules (PHONY): Add bench-build target.
benchtests/Makefile (bench): Depend on bench-build.
(bench-build): New target.
