Commit Graph

11 Commits

Author SHA1 Message Date
Joseph Myers
f1d237df1e Remove GCC version conditionals on -Wmaybe-uninitialized pragmas.
One common case of __GNUC_PREREQ (4, 7) conditionals is use of
diagnostic control pragmas for -Wmaybe-uninitialized, an option
introduced in GCC 4.7 where older GCC needed -Wuninitialized to be
controlled instead if the warning appeared with older GCC.  This patch
removes such conditionals.

(There remain several older uses of -Wno-uninitialized in makefiles
that still need to be converted to diagnostic control pragmas if the
issue is still present with current sources and supported GCC
versions, and it's likely that in most cases those pragmas also will
end up controlling -Wmaybe-uninitialized.)

Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch, except for libresolv
since res_send.c contains assertions whose line numbers are changed by
the patch).

	* resolv/res_send.c (send_vc) [__GNUC_PREREQ (4, 7)]: Make code
	unconditional.
	* soft-fp/fmadf4.c [__GNUC_PREREQ (4, 7)]: Likewise.
	[!__GNUC_PREREQ (4, 7)]: Remove conditional code.
	* soft-fp/fmasf4.c [__GNUC_PREREQ (4, 7)]: Make code
	unconditional.
	[!__GNUC_PREREQ (4, 7)]: Remove conditional code.
	* soft-fp/fmatf4.c [__GNUC_PREREQ (4, 7)]: Make code
	unconditional.
	[!__GNUC_PREREQ (4, 7)]: Remove conditional code.
	* stdlib/setenv.c
	[((__GNUC__ << 16) + __GNUC_MINOR__) >= ((4 << 16) + 7)]: Make
	code unconditional.
	[!(((__GNUC__ << 16) + __GNUC_MINOR__) >= ((4 << 16) + 7))]:
	Remove conditional code.
	* sysdeps/ieee754/dbl-64/e_lgamma_r.c
	(__ieee754_lgamma_r) [__GNUC_PREREQ (4, 7)]: Make code
	unconditional.
	(__ieee754_lgamma_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional
	code.
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c
	(__ieee754_lgammaf_r) [__GNUC_PREREQ (4, 7)]: Make code
	unconditional.
	(__ieee754_lgammaf_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional
	code.
	* sysdeps/ieee754/ldbl-128/k_tanl.c
	(__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional.
	(__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
	* sysdeps/ieee754/ldbl-128ibm/k_tanl.c
	(__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional.
	(__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
	* sysdeps/ieee754/ldbl-96/e_lgammal_r.c
	(__ieee754_lgammal_r) [__GNUC_PREREQ (4, 7)]: Make code
	unconditional.
	(__ieee754_lgammal_r) [!__GNUC_PREREQ (4, 7)]: Remove conditional
	code.
	* sysdeps/ieee754/ldbl-96/k_tanl.c
	(__kernel_tanl) [__GNUC_PREREQ (4, 7)]: Make code unconditional.
	(__kernel_tanl) [!__GNUC_PREREQ (4, 7)]: Remove conditional code.
2015-10-27 23:42:20 +00:00
Joseph Myers
c8235dda72 Avoid excess range overflowing results from cosh, sinh, lgamma (bug 18980).
Various i386 libm functions return values with excess range and
precision; Wilco Dijkstra's patches to make isfinite etc. expand
inline cause this pre-existing issue to result in test failures (when
e.g. a result that overflows float but not long double gets counted as
overflowing for some purposes but not others).

This patch addresses those cases arising from functions defined in C,
adding a math_narrow_eval macro that forces values to memory to
eliminate excess precision if FLT_EVAL_METHOD indicates this is
needed, and is a no-op otherwise.  I'll convert existing uses of
volatile and asm for this purpose to use the new macro later, once
i386 has clean test results again (which requires fixes for .S files
as well).

Tested for x86_64 and x86.  Committed.

	[BZ #18980]
	* sysdeps/generic/math_private.h: Include <float.h>.
	(math_narrow_eval): New macro.
	[FLT_EVAL_METHOD != 0] (excess_precision): Likewise.
	* sysdeps/ieee754/dbl-64/e_cosh.c (__ieee754_cosh): Use
	math_narrow_eval on overflowing return value.
	* sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r):
	Likewise.
	* sysdeps/ieee754/dbl-64/e_sinh.c (__ieee754_sinh): Likewise.
	* sysdeps/ieee754/flt-32/e_coshf.c (__ieee754_coshf): Likewise.
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r):
	Likewise.
	* sysdeps/ieee754/flt-32/e_sinhf.c (__ieee754_sinhf): Likewise.
2015-09-18 20:00:48 +00:00
Joseph Myers
050f29c188 Fix lgamma (negative) inaccuracy (bug 2542, bug 2543, bug 2558).
The existing implementations of lgamma functions (except for the ia64
versions) use the reflection formula for negative arguments.  This
suffers large inaccuracy from cancellation near zeros of lgamma (near
where the gamma function is +/- 1).

This patch fixes this inaccuracy.  For arguments above -2, there are
no zeros and no large cancellation, while for sufficiently large
negative arguments the zeros are so close to integers that even for
integers +/- 1ulp the log(gamma(1-x)) term dominates and cancellation
is not significant.  Thus, it is only necessary to take special care
about cancellation for arguments around a limited number of zeros.

Accordingly, this patch uses precomputed tables of relevant zeros,
expressed as the sum of two floating-point values.  The log of the
ratio of two sines can be computed accurately using log1p in cases
where log would lose accuracy.  The log of the ratio of two gamma(1-x)
values can be computed using Stirling's approximation (the difference
between two values of that approximation to lgamma being computable
without computing the two values and then subtracting), with
appropriate adjustments (which don't reduce accuracy too much) in
cases where 1-x is too small to use Stirling's approximation directly.

In the interval from -3 to -2, using the ratios of sines and of
gamma(1-x) can still produce too much cancellation between those two
parts of the computation (and that interval is also the worst interval
for computing the ratio between gamma(1-x) values, which computation
becomes more accurate, while being less critical for the final result,
for larger 1-x).  Because this can result in errors slightly above
those accepted in glibc, this interval is instead dealt with by
polynomial approximations.  Separate polynomial approximations to
(|gamma(x)|-1)(x-n)/(x-x0) are used for each interval of length 1/8
from -3 to -2, where n (-3 or -2) is the nearest integer to the
1/8-interval and x0 is the zero of lgamma in the relevant half-integer
interval (-3 to -2.5 or -2.5 to -2).

Together, the two approaches are intended to give sufficient accuracy
for all negative arguments in the problem range.  Outside that range,
the previous implementation continues to be used.

Tested for x86_64, x86, mips64 and powerpc.  The mips64 and powerpc
testing shows up pre-existing problems for ldbl-128 and ldbl-128ibm
with large negative arguments giving spurious "invalid" exceptions
(exposed by newly added tests for cases this patch doesn't affect the
logic for); I'll address those problems separately.

	[BZ #2542]
	[BZ #2543]
	[BZ #2558]
	* sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Call
	__lgamma_neg for arguments from -28.0 to -2.0.
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Call
	__lgamma_negf for arguments from -15.0 to -2.0.
	* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
	Call __lgamma_negl for arguments from -48.0 or -50.0 to -2.0.
	* sysdeps/ieee754/ldbl-96/e_lgammal_r.c (__ieee754_lgammal_r):
	Call __lgamma_negl for arguments from -33.0 to -2.0.
	* sysdeps/ieee754/dbl-64/lgamma_neg.c: New file.
	* sysdeps/ieee754/dbl-64/lgamma_product.c: Likewise.
	* sysdeps/ieee754/flt-32/lgamma_negf.c: Likewise.
	* sysdeps/ieee754/flt-32/lgamma_productf.c: Likewise.
	* sysdeps/ieee754/ldbl-128/lgamma_negl.c: Likewise.
	* sysdeps/ieee754/ldbl-128/lgamma_productl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/lgamma_negl.c: Likewise.
	* sysdeps/ieee754/ldbl-128ibm/lgamma_productl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/lgamma_negl.c: Likewise.
	* sysdeps/ieee754/ldbl-96/lgamma_product.c: Likewise.
	* sysdeps/ieee754/ldbl-96/lgamma_productl.c: Likewise.
	* sysdeps/generic/math_private.h (__lgamma_negf): New prototype.
	(__lgamma_neg): Likewise.
	(__lgamma_negl): Likewise.
	(__lgamma_product): Likewise.
	(__lgamma_productl): Likewise.
	* math/Makefile (libm-calls): Add lgamma_neg and lgamma_product.
	* math/auto-libm-test-in: Add more tests of lgamma.
	* math/auto-libm-test-out: Regenerated.
	* sysdeps/i386/fpu/libm-test-ulps: Update.
	* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2015-09-10 22:27:58 +00:00
Joseph Myers
9124ccf76a Fix lgamma implementations for -Wuninitialized.
If you remove the "override CFLAGS += -Wno-uninitialized" in
math/Makefile, you get errors from lgamma implementations of the form:

../sysdeps/ieee754/dbl-64/e_lgamma_r.c: In function '__ieee754_lgamma_r':
../sysdeps/ieee754/dbl-64/e_lgamma_r.c:297:13: error: 'nadj' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  if(hx<0) r = nadj - r;

This is one of the standard kinds of false positive uninitialized
warnings: nadj is set under a certain condition, and then later used
under the same condition.  This patch uses DIAG_* macros to suppress
the warning on the use of nadj.  The ldbl-128 / ldbl-128ibm
implementation has a substantially different structure that avoids
this issue.

Tested for x86_64.  (In fact this patch eliminates the need for that
-Wno-uninitialized on x86_64, but I want to test on more architectures
before removing it.)

	* sysdeps/ieee754/dbl-64/e_lgamma_r.c: Include <libc-internal.h>.
	(__ieee754_lgamma_r): Ignore uninitialized warnings around use of
	NADJ.
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c: Include <libc-internal.h>.
	(__ieee754_lgammaf_r): Ignore uninitialized warnings around use of
	NADJ.
	* sysdeps/ieee754/ldbl-96/e_lgammal_r.c: Include <libc-internal.h>.
	(__ieee754_lgammal_r): Ignore uninitialized warnings around use of
	NADJ.
2015-05-21 23:44:33 +00:00
Joseph Myers
ff069f024a Fix lgammaf spurious underflows (bug 18220).
The flt-32 implementation of lgammaf produces spurious underflow
exceptions for some large arguments, because of calculations involving
x^-2 multiplied by small constants.  This patch fixes this by
adjusting the threshold for a simpler computation to 2**26 (the error
in the simpler computation is on the order of 0.5 * log (x), for a
result on the order of x * log (x)).

Tested for x86_64 and x86.

	[BZ #18220]
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Use
	2**26 not 2**58 as threshold for returning x * (log (x) - 1).
	* math/auto-libm-test-in: Add another test of lgamma.
	* math/auto-libm-test-out: Regenerated.
2015-05-15 17:21:08 +00:00
Joseph Myers
ffa3cd7f1a Fix lgammaf spurious underflow (bug 15427). 2013-09-03 15:32:54 +00:00
Richard Henderson
1ed0291c31 Use <> for math.h and math_private.h everywhere.
Entire tree edited via find | grep | sed.
2012-03-09 16:09:10 -08:00
Ulrich Drepper
0ac5ae2335 Optimize libm
libm is now somewhat integrated with gcc's -ffinite-math-only option
and lots of the wrapper functions have been optimized.
2011-10-12 11:27:51 -04:00
Ulrich Drepper
c039eedd66 [BZ #4407]
* sysdeps/ieee754/dbl-64/e_lgamma_r.c: Fix *signgamp for -0.0.
	* sysdeps/ieee754/flt-32/e_lgammaf_r.c: Likewise.
	* sysdeps/ieee754/ldbl-96/e_lgammal_r.c: Likewise.
	* math/libm-test.inc: Add test for this case.

	Half the patch by Christian Iseli <christian.iseli@licr.org>.
2007-10-06 18:37:30 +00:00
Ulrich Drepper
f30e0cd35e Update.
1999-10-19  Ulrich Drepper  <drepper@cygnus.com>

	* sysdeps/i386/fpu/s_nextafterl.c: Add __nextafterl and nextafterl
	aliases.

	* sysdeps/ieee754/flt-32/e_lgammaf_r.c: Don't handle -Inf special.

	* sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r): Check
	for -Inf and return NaN.

	* math/gen-libm-test.pl: Fix program name in help message.

	* math/libm-test.inc (check_complex): It's Imaginary, not Complex.

	* math/libm-test.inc (gamma_test): Result of gamma(-inf) is +inf.

	* sysdeps/i386/Implies: Correct order of libm directories.
1999-10-20 03:20:31 +00:00
Ulrich Drepper
abfbdde177 Update. 1999-07-14 00:54:57 +00:00