Use the __nptl_tls_static_size_for_stack inline function instead,
and the GLRO (dl_tls_static_align) value directly.
The computation of GLRO (dl_tls_static_align) in
_dl_determine_tlsoffset ensures that the alignment is at least
TLS_TCB_ALIGN, which at least STACK_ALIGN (see allocate_stack).
Therefore, the additional rounding-up step is removed.
ALso move the initialization of the default stack size from
__pthread_initialize_minimal_internal to __pthread_early_init.
This introduces an extra system call during single-threaded startup,
but this simplifies the initialization sequence. No locking is
needed around the writes to __default_pthread_attr because the
process is single-threaded at this point.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This helps to clarify that the caching of these fields in libpthread
(in __static_tls_size, __static_tls_align_m1) is unnecessary.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For some reason only dlopen failure caused dtv gaps to be reused.
It is possible that the intent was to never reuse modids for a
different module, but after dlopen failure all gaps are reused
not just the ones caused by the unfinished dlopened.
So the code has to handle reused modids already which seems to
work, however the data races at thread creation and tls access
(see bug 19329 and bug 27111) may be more severe if slots are
reused so this is scheduled after those fixes. I think fixing
the races are not simpler if reuse is disallowed and reuse has
other benefits, so set GL(dl_tls_dtv_gaps) whenever entries are
removed from the middle of the slotinfo list. The value does
not have to be correct: incorrect true value causes the next
modid query to do a slotinfo walk, incorrect false will leave
gaps and new entries are added at the end.
Fixes bug 27135.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This is a follow up patch to the fix for bug 19329. This adds relaxed
MO atomics to accesses that were previously data races but are now
race conditions, and where relaxed MO is sufficient.
The race conditions all follow the pattern that the write is behind the
dlopen lock, but a read can happen concurrently (e.g. during tls access)
without holding the lock. For slotinfo entries the read value only
matters if it reads from a synchronized write in dlopen or dlclose,
otherwise the related dtv entry is not valid to access so it is fine
to leave it in an inconsistent state. The same applies for
GL(dl_tls_max_dtv_idx) and GL(dl_tls_generation), but there the
algorithm relies on the fact that the read of the last synchronized
write is an increasing value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
DTV setup at thread creation (_dl_allocate_tls_init) is changed
to take the dlopen lock, GL(dl_load_lock). Avoiding data races
here without locks would require design changes: the map that is
accessed for static TLS initialization here may be concurrently
freed by dlclose. That use after free may be solved by only
locking around static TLS setup or by ensuring dlclose does not
free modules with static TLS, however currently every link map
with TLS has to be accessed at least to see if it needs static
TLS. And even if that's solved, still a lot of atomics would be
needed to synchronize DTV related globals without a lock. So fix
both bug 19329 and bug 27111 with a lock that prevents DTV setup
running concurrently with dlopen or dlclose.
_dl_update_slotinfo at TLS access still does not use any locks
so CONCURRENCY NOTES are added to explain the synchronization.
The early exit from the slotinfo walk when max_modid is reached
is not strictly necessary, but does not hurt either.
An incorrect acquire load was removed from _dl_resize_dtv: it
did not synchronize with any release store or fence and
synchronization is now handled separately at thread creation
and TLS access time.
There are still a number of racy read accesses to globals that
will be changed to relaxed MO atomics in a followup patch. This
should not introduce regressions compared to existing behaviour
and avoid cluttering the main part of the fix.
Not all TLS access related data races got fixed here: there are
additional races at lazy tlsdesc relocations see bug 27137.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The stack list is available in ld.so since commit
1daccf403b ("nptl: Move stack list
variables into _rtld_global"), so it's possible to walk the stack
list directly in ld.so and perform the initialization there.
This eliminates an unprotected function pointer from _rtld_global
and reduces the libpthread initialization code.
map is not valid to access here because it can be freed by a concurrent
dlclose: during tls access (via __tls_get_addr) _dl_update_slotinfo is
called without holding dlopen locks. So don't check the modid of map.
The map == 0 and map != 0 code paths can be shared (avoiding the dtv
resize in case of map == 0 is just an optimization: larger dtv than
necessary would be fine too).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Since
commit a509eb117f
Avoid late dlopen failure due to scope, TLS slotinfo updates [BZ #25112]
the generation counter update is not needed in the failure path.
That commit ensures allocation in _dl_add_to_slotinfo happens before
the demarcation point in dlopen (it is called twice, first time is for
allocation only where dlopen can still be reverted on failure, then
second time actual dtv updates are done which then cannot fail).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The max modid is a valid index in the dtv, it should not be skipped.
The bug is observable if the last module has modid == 64 and its
generation is same or less than the max generation of the previous
modules. Then dtv[0].counter implies dtv[64] is initialized but
it isn't. Fixes bug 27136.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Make the computation in elf/dl-tls.c more transparent, and add
an explicit test for the historic value.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The kernel ABI is not finalized, and there are now various proposals
to change the size of struct rseq, which would make the glibc ABI
dependent on the version of the kernels used for building glibc.
This is of course not acceptable.
This reverts commit 48699da1c4 ("elf:
Support at least 32-byte alignment in static dlopen"), commit
8f4632deb3 ("Linux: rseq registration
tests"), commit 6e29cb3f61 ("Linux: Use
rseq in sched_getcpu if available"), and commit
0c76fc3c2b ("Linux: Perform rseq
registration at C startup and thread creation"), resolving the conflicts
introduced by the ARC port and the TLS static surplus changes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
On some targets static TLS surplus area can be used opportunistically
for dynamically loaded modules such that the TLS access then becomes
faster (TLSDESC and powerpc TLS optimization). However we don't want
all surplus TLS to be used for this optimization because dynamically
loaded modules with initial-exec model TLS can only use surplus TLS.
The new contract for surplus static TLS use is:
- libc.so can have up to 192 bytes of IE TLS,
- other system libraries together can have up to 144 bytes of IE TLS.
- Some "optional" static TLS is available for opportunistic use.
The optional TLS is now tunable: rtld.optional_static_tls, so users
can directly affect the allocated static TLS size. (Note that module
unloading with dlclose does not reclaim static TLS. After the optional
TLS runs out, TLS access is no longer optimized to use static TLS.)
The default setting of rtld.optional_static_tls is 512 so the surplus
TLS is 3*192 + 4*144 + 512 = 1664 by default, the same as before.
Fixes BZ #25051.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The new static TLS surplus size computation is
surplus_tls = 192 * (nns-1) + 144 * nns + 512
where nns is controlled via the rtld.nns tunable. This commit
accounts audit modules too so nns = rtld.nns + audit modules.
rtld.nns should only include the namespaces required by the
application, namespaces for audit modules are accounted on top
of that so audit modules don't use up the static TLS that is
reserved for the application. This allows loading many audit
modules without tuning rtld.nns or using up static TLS, and it
fixes
FAIL: elf/tst-auditmany
Note that DL_NNS is currently a hard upper limit for nns, and
if rtld.nns + audit modules go over the limit that's a fatal
error. By default rtld.nns is 4 which allows 12 audit modules.
Counting the audit modules is based on existing audit string
parsing code, we cannot use GLRO(dl_naudit) before the modules
are actually loaded.
TLS_STATIC_SURPLUS is 1664 bytes currently which is not enough to
support DL_NNS (== 16) number of dynamic link namespaces, if we
assume 192 bytes of TLS are reserved for libc use and 144 bytes
are reserved for other system libraries that use IE TLS.
A new tunable is introduced to control the number of supported
namespaces and to adjust the surplus static TLS size as follows:
surplus_tls = 192 * (rtld.nns-1) + 144 * rtld.nns + 512
The default is rtld.nns == 4 and then the surplus TLS size is the
same as before, so the behaviour is unchanged by default. If an
application creates more namespaces than the rtld.nns setting
allows, then it is not guaranteed to work, but the limit is not
checked. So existing usage will continue to work, but in the
future if an application creates more than 4 dynamic link
namespaces then the tunable will need to be set.
In this patch DL_NNS is a fixed value and provides a maximum to
the rtld.nns setting.
Static linking used fixed 2048 bytes surplus TLS, this is changed
so the same contract is used as for dynamic linking. With static
linking DL_NNS == 1 so rtld.nns tunable is forced to 1, so by
default the surplus TLS is reduced to 144 + 512 = 656 bytes. This
change is not expected to cause problems.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Register rseq TLS for each thread (including main), and unregister for
each thread (excluding main). "rseq" stands for Restartable Sequences.
See the rseq(2) man page proposed here:
https://lkml.org/lkml/2018/9/19/647
Those are based on glibc master branch commit 3ee1e0ec5c.
The rseq system call was merged into Linux 4.18.
The TLS_STATIC_SURPLUS define is increased to leave additional room for
dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working.
The increase (76 bytes) is larger than 32 bytes because it has not been
increased in quite a while. The cost in terms of additional TLS storage
is quite significant, but it will also obscure some initial-exec-related
dlopen failures.
This change splits the scope and TLS slotinfo updates in dlopen into
two parts: one to resize the data structures, and one to actually apply
the update. The call to add_to_global_resize in dl_open_worker is moved
before the demarcation point at which no further memory allocations are
allowed.
_dl_add_to_slotinfo is adjusted to make the list update optional. There
is some optimization possibility here because we could grow the slotinfo
list of arrays in a single call, one the largest TLS modid is known.
This commit does not fix the fatal meory allocation failure in
_dl_update_slotinfo. Ideally, this error during dlopen should be
recoverable.
The update order of scopes and TLS data structures is retained, although
it appears to be more correct to fully initialize TLS first, and then
expose symbols in the newly loaded objects via the scope update.
Tested on x86_64-linux-gnu.
Change-Id: I240c58387dabda3ca1bcab48b02115175fa83d6c
Commit 7a5e3d9d63 (elf: Assume TLS is
initialized in _dl_map_object_from_fd) removed the last call of
_dl_tls_setup, but did not remove the function itself.
An earlier fix for TLS dropped early initialization of DTV entries for
modules using static TLS, leaving it for __tls_get_addr to set them
up. That worked on platforms that require the GD access model to be
relaxed to LE in the main executable, but it caused a regression on
platforms that allow GD in the main executable, particularly in
statically-linked programs: they use a custom __tls_get_addr that does
not update the DTV, which fails when the DTV early initialization is
not performed.
In static programs, __libc_setup_tls performs the DTV initialization
for the main thread, but the DTV of other threads is set up in
_dl_allocate_tls_init, so that's the fix that matters.
Restoring the initialization in the remaining functions modified by
this patch was just for uniformity. It's not clear that it is ever
needed: even on platforms that allow GD in the main executable, the
dynamically-linked version of __tls_get_addr would set up the DTV
entries, even for static TLS modules, while updating the DTV counter.
for ChangeLog
[BZ #19826]
* elf/dl-tls.c (_dl_allocate_tls_init): Restore DTV early
initialization of static TLS entries.
* elf/dl-reloc.c (_dl_nothread_init_static_tls): Likewise.
* nptl/allocatestack.c (init_one_static_tls): Likewise.
Instead, call malloc and explicitly align the pointer.
There is no external location to store the original (unaligned)
pointer, and this commit increases the allocation size to store
the pointer at a fixed location relative to the TCB pointer.
The manual alignment means that some space goes unused which
was previously made available for subsequent allocations.
However, in the TLS_DTV_AT_TP case, the manual alignment code
avoids aligning the pre-TCB to the TLS block alignment. (Even
while using memalign, the allocation had some unused padding
in front.)
This concludes the removal of memalign calls from the TLS code,
and the new tst-tls3-malloc test verifies that only core malloc
routines are used.
Instead of a flag which indicates the pointer can be freed, dtv_t
now includes the pointer which should be freed. Due to padding,
the size of dtv_t does not increase.
To avoid using memalign, the new allocate_dtv_entry function
allocates a sufficiently large buffer so that a sub-buffer
can be found in it which starts with an aligned pointer. Both
the aligned and original pointers are kept, the latter for calling
free later.
for ChangeLog
[BZ #17090]
[BZ #17620]
[BZ #17621]
[BZ #17628]
* NEWS: Update.
* elf/dl-tls.c (_dl_update_slotinfo): Clean up outdated DTV
entries with Static TLS too. Skip entries past the end of the
allocated DTV, from Alan Modra.
(tls_get_addr_tail): Update to glibc_likely/unlikely. Move
Static TLS DTV entry set up from...
(_dl_allocate_tls_init): ... here (fix modid assertion), ...
* elf/dl-reloc.c (_dl_nothread_init_static_tls): ... here...
* nptl/allocatestack.c (init_one_static_tls): ... and here...
* elf/dlopen.c (dl_open_worker): Drop l_tls_modid upper bound
for Static TLS.
* elf/tlsdeschtab.h (map_generation): Return size_t. Check
that the slot we find is associated with the given map before
using its generation count.
* nptl_db/db_info.c: Include ldsodefs.h.
(rtld_global, dtv_slotinfo_list, dtv_slotinfo): New typedefs.
* nptl_db/structs.def (DB_RTLD_VARIABLE): New macro.
(DB_MAIN_VARIABLE, DB_RTLD_GLOBAL_FIELD): Likewise.
(link_map::l_tls_offset): New struct field.
(dtv_t::counter): Likewise.
(rtld_global): New struct.
(_rtld_global): New rtld variable.
(dl_tls_dtv_slotinfo_list): New rtld global field.
(dtv_slotinfo_list): New struct.
(dtv_slotinfo): Likewise.
* nptl_db/td_symbol_list.c: Drop gnu/lib-names.h include.
(td_lookup): Rename to...
(td_mod_lookup): ... this. Use new mod parameter instead of
LIBPTHREAD_SO.
* nptl_db/td_thr_tlsbase.c: Include link.h.
(dtv_slotinfo_list, dtv_slotinfo): New functions.
(td_thr_tlsbase): Check DTV generation. Compute Static TLS
addresses even if the DTV is out of date or missing them.
* nptl_db/fetch-value.c (_td_locate_field): Do not refuse to
index zero-length arrays.
* nptl_db/thread_dbP.h: Include gnu/lib-names.h.
(td_lookup): Make it a macro implemented in terms of...
(td_mod_lookup): ... this declaration.
* nptl_db/db-symbols.awk (DB_RTLD_VARIABLE): Override.
(DB_MAIN_VARIABLE): Likewise.
__tls_get_addr/___tls_get_addr is always defined in ld.so. There is
no need to call them via PLT inside ld.so. This patch adds the hidden
__tls_get_addr/___tls_get_addr aliases and calls them directly from
_dl_tlsdesc_dynamic. There is no need to set up the EBX register in
i386 _dl_tlsdesc_dynamic when calling the hidden ___tls_get_addr.
* elf/dl-tls.c (__tls_get_addr): Provide the hidden definition
if not defined.
* sysdeps/i386/dl-tls.h (___tls_get_addr): Provide the hidden
definition.
* sysdeps/i386/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Call the
hidden ___tls_get_addr.
* sysdeps/x86_64/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Call the
hidden __tls_get_addr.
* sysdeps/generic/localplt.data (__tls_get_addr): Removed.
* sysdeps/unix/sysv/linux/i386/localplt.data (___tls_get_addr):
Likewise.
This patch changes _dl_allocate_tls_init to resize DTV if the current DTV
isn't big enough. Tested on X86-64, x32 and ia32.
[BZ #13862]
* elf/dl-tls.c: Include <atomic.h>.
(oom): Remove #ifdef SHARED/#endif.
(_dl_static_dtv, _dl_initial_dtv): Moved before ...
(_dl_resize_dtv): This. Extracted from _dl_update_slotinfo.
(_dl_allocate_tls_init): Resize DTV if the current DTV isn't
big enough.
(_dl_update_slotinfo): Call _dl_resize_dtv to resize DTV.
* nptl/Makefile (tests): Add tst-stack4.
(modules-names): Add tst-stack4mod.
($(objpfx)tst-stack4): New.
(tst-stack4mod.sos): Likewise.
($(objpfx)tst-stack4.out): Likewise.
($(tst-stack4mod.sos)): Likewise.
(clean): Likewise.
* nptl/tst-stack4.c: New file.
* nptl/tst-stack4mod.c: Likewise.
This commit fixes a bug where the dynamic loader would crash
when loading audit libraries, via LD_AUDIT, where those libraries
used TLS. The dynamic loader was not considering that the audit
libraries would use TLS and failed to bump the TLS generation
counter leaving TLS usage inconsistent after loading the audit
libraries.
https://sourceware.org/ml/libc-alpha/2014-02/msg00569.html
This reverts commit 1f33d36a8a.
Conflicts:
elf/dl-misc.c
Also reverts the follow commits that were bug fixes to new code introduced
in the above commit:
063b2acbceb627fdd585e81c64bba1
* csu/libc-tls.c (static_dtv): Renamed to ...
(_dl_static_dtv): This. Make it global.
(_dl_initial_dtv): Removed.
(__libc_setup_tls): Updated.
* elf/dl-tls.c (DL_INITIAL_DTV): New macro.
(_dl_deallocate_tls): Replace GL(dl_initial_dtv) with
DL_INITIAL_DTV.
update_get_addr returns a link_map*, but the return expression
was of type char*. Fix by relying on gcc's void* arithmetic
extension and auto-conversion from void*.
