Wrap symbol address run-time calculation into a macro and use it
throughout, replacing inline calculations.
There are a couple of variants, most of them different in a functionally
insignificant way. Most calculations are right following RESOLVE_MAP,
at which point either the map or the symbol returned can be checked for
validity as the macro sets either both or neither. In some places both
the symbol and the map has to be checked however.
My initial implementation therefore always checked both, however that
resulted in code larger by as much as 0.3%, as many places know from
elsewhere that no check is needed. I have decided the size growth was
unacceptable.
Having looked closer I realized that it's the map that is the culprit.
Therefore I have modified LOOKUP_VALUE_ADDRESS to accept an additional
boolean argument telling it to access the map without checking it for
validity. This in turn has brought quite nice results, with new code
actually being smaller for i686, and MIPS o32, n32 and little-endian n64
targets, unchanged in size for x86-64 and, unusually, marginally larger
for big-endian MIPS n64, as follows:
i686:
text data bss dec hex filename
152255 4052 192 156499 26353 ld-2.27.9000-base.so
152159 4052 192 156403 262f3 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/el:
text data bss dec hex filename
142906 4396 260 147562 2406a ld-2.27.9000-base.so
142890 4396 260 147546 2405a ld-2.27.9000-elf-symbol-value.so
MIPS/n32/el:
text data bss dec hex filename
142267 4404 260 146931 23df3 ld-2.27.9000-base.so
142171 4404 260 146835 23d93 ld-2.27.9000-elf-symbol-value.so
MIPS/n64/el:
text data bss dec hex filename
149835 7376 408 157619 267b3 ld-2.27.9000-base.so
149787 7376 408 157571 26783 ld-2.27.9000-elf-symbol-value.so
MIPS/o32/eb:
text data bss dec hex filename
142870 4396 260 147526 24046 ld-2.27.9000-base.so
142854 4396 260 147510 24036 ld-2.27.9000-elf-symbol-value.so
MIPS/n32/eb:
text data bss dec hex filename
142019 4404 260 146683 23cfb ld-2.27.9000-base.so
141923 4404 260 146587 23c9b ld-2.27.9000-elf-symbol-value.so
MIPS/n64/eb:
text data bss dec hex filename
149763 7376 408 157547 2676b ld-2.27.9000-base.so
149779 7376 408 157563 2677b ld-2.27.9000-elf-symbol-value.so
x86-64:
text data bss dec hex filename
148462 6452 400 155314 25eb2 ld-2.27.9000-base.so
148462 6452 400 155314 25eb2 ld-2.27.9000-elf-symbol-value.so
[BZ #19818]
* sysdeps/generic/ldsodefs.h (LOOKUP_VALUE_ADDRESS): Add `set'
parameter.
(SYMBOL_ADDRESS): New macro.
[!ELF_FUNCTION_PTR_IS_SPECIAL] (DL_SYMBOL_ADDRESS): Use
SYMBOL_ADDRESS for symbol address calculation.
* elf/dl-runtime.c (_dl_fixup): Likewise.
(_dl_profile_fixup): Likewise.
* elf/dl-symaddr.c (_dl_symbol_address): Likewise.
* elf/rtld.c (dl_main): Likewise.
* sysdeps/aarch64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/alpha/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/hppa/dl-symaddr.c (_dl_symbol_address): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_rel): Likewise.
(elf_machine_rela): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/mips/dl-machine.h (ELF_MACHINE_BEFORE_RTLD_RELOC):
Likewise.
(elf_machine_reloc): Likewise.
(elf_machine_got_rel): Likewise.
* sysdeps/mips/dl-trampoline.c (__dl_runtime_resolve): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/riscv/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela):
Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Normally, TLS relocations against local symbols are optimised by the linker
to be absolute. However, gold does not do this, and so it is possible to
end up with, for example, R_SPARC_TLS_DTPMOD64 referring to a local symbol.
Since sym_map is left as null in elf_machine_rela for the special local
symbol case, the relocation handling thinks it has nothing to do, and so
the module gets left as 0. Havoc then ensues when the variable in question
is accessed.
Before this fix, the main_local_gold program would receive a SIGBUS on
sparc64, and SIGSEGV on powerpc32. With this fix applied, that test now
passes like the rest of them.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela):
Assign sym_map to be map for local symbols, as TLS relocations
use sym_map to determine whether the symbol is defined and to
extract the TLS information.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Likewise.
ELFv2 functions with localentry:0 are those with a single entry point,
ie. global entry == local entry, that have no requirement on r2 or
r12 and guarantee r2 is unchanged on return. Such an external
function can be called via the PLT without saving r2 or restoring it
on return, avoiding a common load-hit-store for small functions.
This patch implements the ld.so changes necessary for this
optimization. ld.so needs to check that an optimized plt call
sequence is in fact calling a function implemented with localentry:0,
end emit a fatal error otherwise.
The elf/testobj6.c change is to stop "error while loading shared
libraries: expected localentry:0 `preload'" when running
elf/preloadtest, which we'd get otherwise.
* elf/elf.h (PPC64_OPT_LOCALENTRY): Define.
* sysdeps/alpha/dl-machine.h (elf_machine_fixup_plt): Add
refsym and sym parameters. Adjust callers.
* sysdeps/aarch64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/generic/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/mips/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_fixup_plt):
Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.c (_dl_error_localentry): New.
(_dl_reloc_overflow): Increase buffser size. Formatting.
* sysdeps/powerpc/powerpc64/dl-machine.h (ppc64_local_entry_offset):
Delete reloc param, add refsym and sym. Check optimized plt
call stubs for localentry:0 functions. Adjust callers.
(elf_machine_fixup_plt, elf_machine_plt_conflict): Add refsym
and sym parameters. Adjust callers.
(_dl_reloc_overflow): Move attribute.
(_dl_error_localentry): Declare.
* elf/dl-runtime.c (_dl_fixup): Save original sym. Pass
refsym and sym to elf_machine_fixup_plt.
* elf/testobj6.c (preload): Call printf.
This patch adds a new feature for powerpc. In order to get faster access to
the HWCAP/HWCAP2 bits and platform number (i.e. for implementing
__builtin_cpu_is () / __builtin_cpu_supports () in GCC) without the overhead of
reading from the auxiliary vector, we now reserve space for them in the TCB.
This is an ABI change for GLIBC 2.23.
A new versioned symbol '__parse_hwcap_and_convert_at_platform' is available to
get the data from the auxiliary vector and parse it, and store it for later use
in the TLS initialization code. This function is called very early
(in _dl_sysdep_start () via DL_PLATFORM_INFO for the dynamic linking case, and
in __libc_start_main () for the static linking case) to make sure the data is
available at the time of TLS initialization.
* sysdeps/powerpc/Makefile (sysdep-dl-routines): Add hwcapinfo.
(sysdep_routines): Likewise.
(sysdep-rtld-routines): Likewise.
[$(subdir) = nptl](tests): Add test-get_hwcap and test-get_hwcap-static
[$(subdir) = nptl](tests-static): test-get_hwcap-static
* sysdeps/powerpc/Versions: Added new
__parse_hwcap_and_convert_at_platform symbol to GLIBC-2.23.
* sysdeps/powerpc/hwcapinfo.c: New file.
(__tcb_parse_hwcap_and_convert_at_platform): New function to initialize
and parse hwcap, hwcap2 and platform number information.
* sysdeps/powerpc/hwcapinfo.h: New file. Creates global variables
to store HWCAP+HWCAP2 and platform number.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Added new offsets
for HWCAP+HWCAP2 and platform number in the TCB.
* sysdeps/powerpc/nptl/tls.h: New functionality. Stores
the HWCAP, HWCAP2 and platform number in the TCB.
(dtv): Added new fields for HWCAP+HWCAP2 and platform number.
(TLS_INIT_TP): Included calls to add the hwcap and
at_platform values in the TCB in TP initialization.
(TLS_DEFINE_INIT_TP): Likewise.
(THREAD_GET_HWCAP): New macro.
(THREAD_SET_HWCAP): Likewise.
(THREAD_GET_AT_PLATFORM): Likewise.
(THREAD_SET_AT_PLATFORM): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h:
(dl_platform_init): New function that calls
__parse_hwcap_and_convert_at_platform for the dymanic linking case for
powerpc32.
* sysdeps/powerpc/powerpc64/dl-machine.h: Likewise, for powerpc64.
* sysdeps/powerpc/test-get_hwcap-static.c: New file. Testcase for
this functionality, static linking case.
* sysdeps/powerpc/test-get_hwcap.c: New file. Likewise, dynamic
linking case.
* sysdeps/unix/sysv/linux/powerpc/libc-start.c: Added call to
__parse_hwcap_and_convert_at_platform for the static linking case.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist:
Included the new __parse_hwcap_and_convert_at_platform symbol in the
ABI list for GLIBC 2.23.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist:
Likewise.
This patch is glibc support for a PowerPC TLS optimization, inspired
by Alexandre Oliva's TLS optimization for other processors,
http://www.lsd.ic.unicamp.br/~oliva/writeups/TLS/RFC-TLSDESC-x86.txt
In essence, this optimization uses a zero module id in the tls_index
GOT entry to indicate that a TLS variable is allocated space in the
static TLS area. A special plt call linker stub for __tls_get_addr
checks for such a tls_index and if found, returns the offset
immediately. The linker communicates the fact that the special
__tls_get_addr stub is used by setting a bit in the dynamic tag
DT_PPC64_OPT/DT_PPC_OPT. glibc communicates to the linker that this
optimization is available by the presence of __tls_get_addr_opt.
tst-tlsmod2.so is built with -Wl,--no-tls-get-addr-optimize for
tst-tls-dlinfo, which otherwise would fail since it tests that no
static tls is allocated. The ld option --no-tls-get-addr-optimize has
been available since binutils-2.20 so doesn't need a configure test.
* NEWS: Advertise TLS optimization.
* elf/elf.h (R_PPC_TLSGD, R_PPC_TLSLD, DT_PPC_OPT, PPC_OPT_TLS): Define.
(DT_PPC_NUM): Increment.
* elf/dynamic-link.h (HAVE_STATIC_TLS): Define.
(CHECK_STATIC_TLS): Use here.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Optimize
TLS descriptors.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/powerpc/dl-tls.c: New file.
* sysdeps/powerpc/Versions: Add __tls_get_addr_opt.
* sysdeps/powerpc/tst-tlsopt-powerpc.c: New tls test.
* sysdeps/unix/sysv/linux/powerpc/Makefile: Add new test.
Build tst-tlsmod2.so with --no-tls-get-addr-optimize.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist: Likewise.
This patch defines ELF_MACHINE_NO_RELA on all architectures. Tested
only on x86_64 to verify that the sources before and after are
identical except for two instructions that pass the current line
number in dl-machine.h to assert_fail.
* intl/dcigettext.c (_nl_find_msg): Add a cast.
* nis/nis_clone_dir.c (nis_clone_directory): Use char * for ADDR.
* nis/nis_clone_obj.c (nis_clone_object): Likewise.
* nis/nis_clone_res.c (nis_clone_result): Likewise.
* resolv/nss_dns/dns-network.c (getanswer_r): Use const unsigned char *
for END_OF_MESSAGE and CP.
* resolv/res_send.c (send_dg): Add else branch for case impossible
unless `poll' is buggy.
* crypt/crypt_util.c (__setkey_r): Add a cast.
* locale/programs/linereader.c (get_toplvl_escape): Use size_t for
NBYTES, and unsigned char * for BYTES.
* locale/programs/charmap.c (charmap_new_char): Use size_t and
unsighed char * for NBYTES, BYTES parameters.
* sysdeps/generic/dl-hash.h (_dl_elf_hash): Take const char * argument
and cast it.
* sysdeps/i386/i686/dl-hash.h (_dl_elf_hash): Likewise.
* sunrpc/create_xid.c (_create_xid): Don't use unsigned long for RES.
* sunrpc/svcauth_des.c (_svcauth_des): Fix cast type.
* sunrpc/auth_des.c (authdes_create): Don't use u_char for PKEY_DATA.
(authdes_marshal): Don't use unsigned int for LEN.
* sunrpc/xdr.c (xdr_hyper): Don't use unsigned long for T2.
(xdr_u_hyper): Likewise.
(xdr_u_short): Don't use u_long for L.
* sunrpc/xdr_intXX_t.c (xdr_int64_t): Don't use uint32_t for T2.
* inet/rexec.c (rexec_af): Use socklen_t.
* sunrpc/key_call.c (getkeyserv_handle): Likewise.
* sunrpc/rtime.c (rtime): Likewise.
* resolv/res_send.c (send_vc, send_dg): Likewise.
* nis/nis_callback.c (__nis_create_callback): Likewise.
* sysdeps/generic/libc-start.c: Use unsigned int for nthreads ptr.
* sysdeps/posix/getaddrinfo.c (gaih_inet): Fix type of ADDR local.
* libio/libio.h (_IO_BE): Add parenthesis around EXPR.
* intl/dcigettext.c (INTVARDEF, INTUSE): Macros removed.
(_nl_default_dirname): Use libc_hidden_data_def instead of INTVARDEF.
(libc_freeres_fn, DCIGETTEXT): Don't use INTUSE.
* intl/bindtextdom.c (INTUSE): Macro removed.
(_nl_default_dirname): Use libc_hidden_proto.
(set_binding_values): Don't use INTUSE.
* include/libintl.h (_libc_intl_domainname_internal): Decl removed.
(_libc_intl_domainname): Use libc_hidden_proto.
* posix/regex_internal.h (gettext): Remove INTUSE on it.
* locale/SYS_libc.c (_libc_intl_domainname): Use libc_hidden_data_def
rather than INTDEF.
* include/libintl.h (_): Don't use *_internal name.
* ctype/ctype-extn.c (__ctype_tolower, __ctype_toupper): Use int32_t,
not uint32_t.
* locale/lc-ctype.c (_nl_postload_ctype): Likewise for assignments.
* iconv/gconv_open.c (__gconv_open): Remove useless cast.
[BZ #721]
* sysdeps/i386/dl-machine.h (ELF_MACHINE_NO_RELA): Define this outside
of [RESOLVE_MAP].
* sysdeps/sh/dl-machine.h (ELF_MACHINE_NO_REL): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h
(elf_machine_rel, elf_machine_rel_relative): Removed.
* sysdeps/powerpc/powerpc64/dl-machine.h
(elf_machine_rel, elf_machine_rel_relative): Removed.
2005-02-03 Alexandre Oliva <aoliva@redhat.com>
[BZ #721]
* elf/dynamic-link.h: Don't declare nested auto functions that are
not going to be defined.
2004-07-23 Jakub Jelinek <jakub@redhat.com>
[BZ #284]
* include/features.h (_POSIX_SOURCE, _POSIX_C_SOURCE): Define
if _XOPEN_SOURCE >= 500 even if __STRICT_ANSI__ is defined.
2005-02-16 Roland McGrath <roland@redhat.com>
2003-04-15 Jakub Jelinek <jakub@redhat.com>
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Avoid
checking R_PPC_RELATIVE, R_PPC_NONE and whether relocation is
against local symbol in conflict processing.
Don't use weak_extern for dl_rtld_map. Instead check only if [SHARED].
(elf_machine_rela): Clean up.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Clean up.
PowerPC TLS support contributed by Paul Mackerras <paulus@samba.org>.
* sysdeps/powerpc/powerpc32/elf/configure.in: New file.
* sysdeps/powerpc/powerpc32/elf/configure: New generated file.
* elf/tls-macros.h [__powerpc__ && !__powerpc64__]
(TLS_LE, TLS_IE, TLS_LD, TLS_GD): Define them.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Support
new relocs for TLS.
* sysdeps/powerpc/dl-tls.h (TLS_TP_OFFSET, TLS_DTV_OFFSET): Move these
macros out of [SHARED].
(TLS_TPREL_VALUE, TLS_DTPREL_VALUE): New macros.
* elf/elf.h: Define R_PPC_* relocs for TLS support.
Clean up R_PPC64_* macro definition comments.
2002-07-29 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/__longjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/__longjmp.S: ...here.
* sysdeps/powerpc/add_n.S: Moved to...
* sysdeps/powerpc/powerpc32/add_n.S: ...here.
* sysdeps/powerpc/addmul_1.S: Moved to...
* sysdeps/powerpc/powerpc32/addmul_1.S: ...here.
* sysdeps/powerpc/atomicity.h: Moved to...
* sysdeps/powerpc/powerpc32/atomicity.h: ...here.
* sysdeps/powerpc/backtrace.c: Moved to...
* sysdeps/powerpc/powerpc32/backtrace.c: ...here.
* sysdeps/powerpc/bp-asm.h: Moved to...
* sysdeps/powerpc/powerpc32/bp-asm.h: ...here.
* sysdeps/powerpc/bsd-_setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/bsd-_setjmp.S: ...here.
* sysdeps/powerpc/bsd-setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/bsd-setjmp.S: ...here.
* sysdeps/powerpc/dl-machine.c: Moved to...
* sysdeps/powerpc/powerpc32/dl-machine.c: ...here.
* sysdeps/powerpc/dl-machine.h: Moved to...
* sysdeps/powerpc/powerpc32/dl-machine.h: ...here.
* sysdeps/powerpc/dl-start.S: Moved to...
* sysdeps/powerpc/powerpc32/dl-start.S: ...here.
* sysdeps/powerpc/gprrest0.S: Moved to...
* sysdeps/powerpc/powerpc32/gprrest0.S: ...here.
* sysdeps/powerpc/gprrest1.S: Moved to...
* sysdeps/powerpc/powerpc32/gprrest1.S: ...here.
* sysdeps/powerpc/gprsave0.S: Moved to...
* sysdeps/powerpc/powerpc32/gprsave0.S: ...here.
* sysdeps/powerpc/gprsave1.S: Moved to...
* sysdeps/powerpc/powerpc32/gprsave1.S: ...here.
* sysdeps/powerpc/lshift.S: Moved to...
* sysdeps/powerpc/powerpc32/lshift.S: ...here.
* sysdeps/powerpc/memset.S: Moved to...
* sysdeps/powerpc/powerpc32/memset.S: ...here.
* sysdeps/powerpc/mul_1.S: Moved to...
* sysdeps/powerpc/powerpc32/mul_1.S: ...here.
* sysdeps/powerpc/ppc-mcount.S: Moved to...
* sysdeps/powerpc/powerpc32/ppc-mcount.S: ...here.
* sysdeps/powerpc/register-dump.h: Moved to...
* sysdeps/powerpc/powerpc32/register-dump.h: ...here.
* sysdeps/powerpc/rshift.S: Moved to...
* sysdeps/powerpc/powerpc32/rshift.S: ...here.
* sysdeps/powerpc/setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/setjmp.S: ...here.
* sysdeps/powerpc/stpcpy.S: Moved to...
* sysdeps/powerpc/powerpc32/stpcpy.S: ...here.
* sysdeps/powerpc/strchr.S: Moved to...
* sysdeps/powerpc/powerpc32/strchr.S: ...here.
* sysdeps/powerpc/strcmp.S: Moved to...
* sysdeps/powerpc/powerpc32/strcmp.S: ...here.
* sysdeps/powerpc/strcpy.S: Moved to...
* sysdeps/powerpc/powerpc32/strcpy.S: ...here.
* sysdeps/powerpc/strlen.S: Moved to...
* sysdeps/powerpc/powerpc32/strlen.S: ...here.
* sysdeps/powerpc/sub_n.S: Moved to...
* sysdeps/powerpc/powerpc32/sub_n.S: ...here.
* sysdeps/powerpc/submul_1.S: Moved to...
* sysdeps/powerpc/powerpc32/submul_1.S: ...here.
* sysdeps/powerpc/elf/bzero.S: Moved to...
* sysdeps/powerpc/powerpc32/elf/bzero.S: ...here.
* sysdeps/powerpc/elf/start.S: Moved to...
* sysdeps/powerpc/powerpc32/elf/start.S: ...here.
* sysdeps/powerpc/fpu/__longjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/__longjmp.S: ...here.
* sysdeps/powerpc/fpu/fprrest.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/fprrest.S: ...here.
* sysdeps/powerpc/fpu/fprsave.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/fprsave.S: ...here.
* sysdeps/powerpc/fpu/setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/setjmp.S: ...here.
* sysdeps/powerpc/fpu/s_copysign.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: ...here.
* sysdeps/powerpc/fpu/s_copysignf.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/s_copysignf.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/brk.S: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/brk.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/clone.S: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/glob64.c: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/glob64.c: ...here.
* sysdeps/unix/sysv/linux/powerpc/kernel_stat.h: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/kernel_stat.h: ...here.
* sysdeps/unix/sysv/linux/powerpc/socket.S: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/socket.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/sysdep.h: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h: ...here.
* sysdeps/unix/sysv/linux/powerpc/syscalls.list: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: ...here.
Support PowerPC64. Separate powerpc into powerpc/powerpc32 and
powerpc/powerpc64.
2002-07-29 Steven Munroe <sjmunroe@us.ibm.com>
* FAQ.in: Add powerpc64 to supported targets list. Also state the
minimum gcc version is 3.2
* README: Add powerpc64 to supported targets list.
* configure.in: Change machine=powerpc to machine=powerpc/powerpc32.
Add powerpc64 and machine=powerpc/powerpc64.
(HAVE_ASM_GLOBAL_DOT_NAME): Define if linux*powerpc/powerpc64*.
* shlib-versions: Set DEFAULT version to 2.2.5 for powerpc64.
* sysdeps/powerpc/Dist: Remove dl-machine.c, dl-start.S, ppc-mcount.S,
gprsave1.S, gprsave0.S, gprrest1.S, and gprrest0.S.
* sysdeps/powerpc/powerpc32/Dist: New file.
* sysdeps/powerpc/Implies: Remove wordsize-32 and powerpc/soft-fp.
* sysdeps/powerpc/powerpc32/Implies: New file.
* sysdeps/powerpc/Makefile(cflags): Remove powerpc32 specific cflags.
($(with-fp) = no): Move test to powerpc32/Makefile.
($(subdir) = misc): Move to powerpc32/Makefile.
($(build-shared) = yes): Move to powerpc32/Makefile.
($(subdir) = csu): Move to powerpc32/Makefile.
(sysdep-rtld-routines): Remove dl-start. Moved these bits to ...
* sysdeps/powerpc/powerpc32/Makefile: New file.
* sysdeps/powerpc/Versions: Remove libgcc functions.
* sysdeps/powerpc/powerpc32/Versions: New file.
* sysdeps/powerpc/fpu/Makefile: Remove fprsave and fprrest.
* sysdeps/powerpc/powerpc32/fpu/Makefile: New file.
* sysdeps/unix/sysv/linux/configure.in (powerpc*):
Set arch_minimum_kernel=2.4.19 for powerpc/powerpc64. Also set
libc_cv_gcc_unwind_find_fde=yes only if !powerpc/powerpc64.
($machine): Add powerpc/powerpc64 to if ... | for
libc_cv_slibdir=/libc64.
(powerpc*): Set ldd_rewrite_script.
* sysdeps/unix/sysv/linux/powerpc/ldd-rewrite.sed: New file.
* sysdeps/unix/sysv/linux/powerpc/Dist: Remove clone.S.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Dist: New file.
Add clone.S.
* sysdeps/unix/sysv/linux/powerpc/Makefile: Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/powerpc/Versions: Remove GLIBC_2.0
functions. Remove GLIBC_2.2 functions except getrlimit and
setrlimit. Moved them to ...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Versions: New file.
2002-09-04 Ulrich Drepper <drepper@redhat.com>
* libio/tst-atime.c: Include <errno.h>.
(do_test): Only perform fstatvfs check if ST_NOATIME is defined.
2002-09-03 Isamu Hasegawa <isamu@yamato.ibm.com>
* posix/regcomp.c (regcomp): Append "__restrict" modifier to avoid
warnings of some compilers.
(build_collating_symbol): Change the type of characters from
"unsigned char" to "char", and append a cast to "char*" pointer in
array subscript.
(build_collating_symbol): Likewise.
(build_equiv_class): Likewise.
(build_charclass): Likewise.
(re_compile_pattern): Remove incorrect cast.
(re_compile_fastmap_iter): Change the type of characters from
"unsigned char" to "char", and append a cast to "char*" pointer
in array subscript.
(parse_bracket_exp): Likewise.
* posix/regex_internal.c (re_string_construct_common): Likewise.
(re_string_allocate): Likewise.
(re_string_construct): Likewise.
(re_string_realloc_buffers): Likewise.
(build_wcs_buffer): Likewise.
(re_string_reconstruct): Likewise.
* posix/regex_internal.h: Change the type of characters in
re_string_t and bracket_elem_t from "unsigned char" to "char".
* posix/regexec.c (regexec): Append "__restrict" modifier to avoid
warnings of some compilers.
(transit_state_bkref_loop): Change the type of characters from
"unsigned char" to "char", and append a cast to "char*" pointer in
array subscript.
(check_node_accept_bytes): Likewise.
(find_collation_sequence_value): Likewise.
