I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
This patch makes soft-fp use static assertions in place of conditional
calls to abort, in places where there are checks for conditions (on
the types for which a macro is used) that the code is not prepared to
handle. The fallback definition of _FP_STATIC_ASSERT (for kernel use
only, as only relevant to compilers not supported for building glibc)
is as in misc/sys/cdefs.h.
This means that soft-fp only ever calls abort for _FP_UNREACHABLE
calls in builds with GCC versions before 4.5. Thus, there is no need
for an abort declaration or <stdlib.h> include, since the kernel code
handles defining abort as a macro itself - and so this avoids any need
for an __KERNEL__ condition on the abort declaration to avoid it
breaking with the kernel's macro definition. That is, this patch is
intended to make glibc's soft-fp code suitable for kernel use with no
kernel-local changes to the soft-fp code needed at all.
Tested for powerpc-nofpu that installed stripped shared libraries are
unchanged by the patch. One explicit <stdlib.h> include had to be
added to a file that was relying on the include from soft-fp.h.
* soft-fp/soft-fp.h (_FP_STATIC_ASSERT): New macro.
[_LIBC]: Do not include <stdlib.h>.
[!_LIBC] (abort): Remove declaration.
* soft-fp/op-2.h (_FP_MUL_MEAT_2_120_240_double): Use
_FP_STATIC_ASSERT instead of conditionally calling abort.
* soft-fp/op-common.h (_FP_FROM_INT): Likewise.
(_FP_EXTEND_CNAN): Likewise.
(FP_TRUNC): Likewise.
(__FP_CLZ): Likewise.
* sysdeps/powerpc/nofpu/flt-rounds.c: Include <stdlib.h>.
This patch makes soft-fp use a new macro _FP_UNREACHABLE in place of
calling abort in unreachable default cases of switch statements.
_FP_UNREACHABLE expands to call __builtin_unreachable for GCC 4.5 and
later; the fallback to abort is thus only for kernel use.
Tested for powerpc-nofpu that installed stripped shared libraries are
unchanged by this patch. Also tested with the math/ tests for mips64
(in the case of fma there *was* previously an abort call generated,
unlike for the other operations - one switch only deals with a subset
of classes for one operand based on what could have been generated in
the earlier part of fma, whereas the other switches deal with all
combinations of two classes - and this is apparently too complicated
for the default case to have been optimized away).
* soft-fp/soft-fp.h (_FP_UNREACHABLE): New macro.
* soft-fp/op-common.h (_FP_MUL): Use _FP_UNREACHABLE instead of
abort.
(_FP_FMA): Likewise.
(_FP_DIV): Likewise.
This patch makes soft-fp headers consistently use multiple-include
guards, something previously done mainly only in the Linux kernel
version. The guard macros aren't the same as those used in the Linux
kernel, but there seems to be enough variation in such guards in Linux
kernel code that hopefully this version will be acceptable there.
Tested for powerpc-nofpu that installed stripped shared libraries are
unchanged by this patch.
* soft-fp/double.h [SOFT_FP_DOUBLE_H]: New multiple-include guard.
* soft-fp/extended.h [SOFT_FP_EXTENDED_H]: Likewise.
* soft-fp/op-1.h [SOFT_FP_OP_1_H]: Likewise.
* soft-fp/op-2.h [SOFT_FP_OP_2_H]: Likewise.
* soft-fp/op-4.h [SOFT_FP_OP_4_H]: Likewise.
* soft-fp/op-8.h [SOFT_FP_OP_8_H]: Likewise.
* soft-fp/op-common.h [SOFT_FP_OP_COMMON_H]: Likewise.
* soft-fp/quad.h [SOFT_FP_QUAD_H]: Likewise.
* soft-fp/single.h [SOFT_FP_SINGLE_H]: Likewise.
* soft-fp/soft-fp.h (SOFT_FP_H): Define to 1 rather than empty.
Add comment on closing #endif.
In the Linux kernel, some architectures have a single function that
uses different kinds of unpacking and packing depending on the
instruction being emulated, meaning it is not readily visible to the
compiler that variables from _FP_DECL and _FP_FRAC_DECL_* macros are
only used in cases where they were initialized. The existing copy of
soft-fp in the Linux kernel uses zero-initialization to avoid warnings
in this case, so while frowned upon as a warning suppression mechanism
in code built for glibc it seems appropriate to have such
zero-initialization conditional on __KERNEL__. This patch duly adds
it, via a macro _FP_ZERO_INIT that expands to empty for non-kernel
compilations.
Tested for powerpc-nofpu that installed stripped shared libraries are
unchanged by this patch.
* soft-fp/soft-fp.h (_FP_ZERO_INIT): New macro. Define depending
on [__KERNEL__].
* soft-fp/op-1.h (_FP_FRAC_DECL_1): Use _FP_ZERO_INIT.
* soft-fp/op-2.h (_FP_FRAC_DECL_2): Likewise.
* soft-fp/op-common.h (_FP_DECL): Likewise.
My Linux kernel patch to update the kernel to current glibc soft-fp
<https://sourceware.org/ml/libc-alpha/2015-02/msg00107.html> still
leaves a few small differences between the two copies of soft-fp.
I think it's desirable to avoid such differences completely if
possible by having one set of sources suitable for use in both places.
To that end, this patch introduces a conditional on __KERNEL__ for the
path by which sfp-machine.h is included.
Tested for powerpc-nofpu that installed stripped shared libraries are
unchanged by this patch.
* soft-fp/soft-fp.h [!_LIBC && __KERNEL__]: Include
<asm/sfp-machine.h> instead of <sfp-machine.h>.
As previously discussed
<https://sourceware.org/ml/libc-alpha/2013-10/msg00345.html>, it would
be desirable to be able to use the same version of the soft-fp code in
the Linux kernel as well as in glibc and libgcc (instead of an old
version in the kernel that's missing ten years of bug fixes,
performance improvements and new features), and to that end it is
useful to add to glibc's copy features in the kernel's copy, even when
they are not directly useful in glibc.
To that end, this patch adds one of those features: support for more
precise "invalid" exceptions describing the particular kind of invalid
operation. These are relevant for powerpc emulation, and are also as
described in IEEE 754-2008 as sub-exceptions.
The set of sub-exceptions here is the union of those supported on
powerpc and those from IEEE 754-2008 (the former adds a distinction
between 0/0 and Inf/Inf; the latter adds a distinction between Inf*0
from multiplication and the same from fma). This includes
sub-exceptions for sqrt, conversions to integer and comparisons that
are not supported in the kernel; I see no obvious reason for these
being missing from the kernel support, given that they are supported
on powerpc so accurate powerpc emulation should generate them.
Tested for powerpc-nofpu that the disassembly of installed shared
libraries is unchanged by this patch.
* soft-fp/soft-fp.h (FP_EX_INVALID_SNAN): New macro.
(FP_EX_INVALID_IMZ): Likewise.
(FP_EX_INVALID_IMZ_FMA): Likewise.
(FP_EX_INVALID_ISI): Likewise.
(FP_EX_INVALID_ZDZ): Likewise.
(FP_EX_INVALID_IDI): Likewise.
(FP_EX_INVALID_SQRT): Likewise.
(FP_EX_INVALID_CVI): Likewise.
(FP_EX_INVALID_VC): Likewise.
* soft-fp/op-common.h (_FP_UNPACK_CANONICAL): Specify more precise
"invalid" exceptions.
(_FP_CHECK_SIGNAN_SEMIRAW): Likewise.
(_FP_ADD_INTERNAL): Likewise.
(_FP_MUL): Likewise.
(_FP_FMA): Likewise.
(_FP_DIV): Likewise.
(_FP_CMP_CHECK_NAN): Likewise.
(_FP_SQRT): Likewise.
(_FP_TO_INT): Likewise.
(FP_EXTEND): Likewise.
Continuing the addition of soft-fp features used in the Linux kernel,
this patch adds soft-fp support for FP_DENORM_ZERO (flushing input
subnormal operands to zero of the same sign).
There are some differences from the kernel version. In the kernel,
the "inexact" exception is set when flushing to zero. This does not
appear to match the documented semantics for either of the
architectures (alpha and sh) for which the kernel uses FP_DENORM_ZERO,
so this patch does not set "inexact" in this case. More operations
now use raw or semi-raw unpacking for optimization than did in the
ten-year-old soft-fp version in the kernel, so checks of
FP_DENORM_ZERO are inserted in those operations. They are also
inserted for comparisons (which already used raw unpacking in the old
version) as I believe that's the correct thing to do when input
subnormals are flushed to zero. They are *not* inserted for _FP_NEG.
(If any processors do flush input subnormals to zero for negation, or
otherwise vary from the rules implemented when FP_DENORM_ZERO is set,
further macros for sfp-machine.h to control this may need to be
added.)
Although the addition for comparisons will cause FP_EX_DENORM to be
set in this case, it still won't be set for comparisons involving
subnormals when not flushed to zero. It's quite possible that
accurate emulation of processors that have such an exception for
subnormal operands will require further changes relating to when
FP_EX_DENORM is set (in general, the support for things defined by
IEEE should be considered more reliable and mature than the support
for things outside the scope of IEEE floating point).
Although some processors also have a mode for abrupt underflow -
producing zeroes instead of output subnormals - there is no such mode
in the kernel's soft-fp, so no such mode is added to glibc's soft-fp
(although it could be if someone wanted to emulate such processor
support).
Tested for powerpc-nofpu that the disassembly of installed shared
libraries is unchanged by this patch.
* soft-fp/soft-fp.h (FP_DENORM_ZERO): New macro.
* soft-fp/op-common.h (_FP_UNPACK_CANONICAL): Check
FP_DENORM_ZERO.
(_FP_CHECK_FLUSH_ZERO): New macro.
(_FP_ADD_INTERNAL): Call _FP_CHECK_FLUSH_ZERO.
(_FP_CMP): Likewise.
(_FP_CMP_EQ): Likewise.
(_FP_TO_INT): Do not set inexact for subnormal arguments if
FP_DENORM_ZERO.
(FP_EXTEND): Call _FP_CHECK_FLUSH_ZERO.
(FP_TRUNC): Likewise.
This patch fixes a soft-fp corner case I previously noted in
<https://sourceware.org/ml/libc-alpha/2013-10/msg00349.html>: when
trapping on underflow is enabled, extensions of subnormals from XFmode
to TFmode need to signal underflow because the result is tiny (but
exact, so the underflow flag is not raised unless trapping is
enabled).
To avoid any excess initialization or tests for other cases of
floating-point extensions, a new FP_INIT_TRAPPING_EXCEPTIONS is added
that does the initialization required for this particular case (more
than FP_INIT_EXCEPTIONS, less than FP_INIT_ROUNDMODE, in general), and
FP_NO_EXACT_UNDERFLOW is added to stub out FP_TRAPPING_EXCEPTIONS
tests for those cases of extensions where the test would be dead code,
to avoid any uninitialized variable warnings.
As the relevant case only applies in libgcc, not to any use of soft-fp
in glibc, there is no bug report in Bugzilla and no non-default
definitions of FP_INIT_TRAPPING_EXCEPTIONS are added by the patch. A
testcase will be added to GCC as part of an update of soft-fp in
libgcc once this patch is in libc.
Tested for powerpc-nofpu that the disassembly of installed shared
libraries is unchanged by this patch. Bootstrapped GCC with updated
soft-fp with no regressions on x86_64-unknown-linux-gnu and verified
that a test of the relevant case passes where it failed before.
* soft-fp/op-common.h (FP_EXTEND): When a subnormal input produces
a subnormal result, set the underflow exception if trapping on
underflow is enabled.
* soft-fp/soft-fp.h (FP_INIT_TRAPPING_EXCEPTIONS): New macro.
(FP_INIT_EXCEPTIONS): Default to FP_INIT_TRAPPING_EXCEPTIONS.
[FP_NO_EXACT_UNDERFLOW] (FP_TRAPPING_EXCEPTIONS): Undefine and
redefine to 0.
* soft-fp/extenddftf2.c (FP_NO_EXACT_UNDERFLOW): Define.
* soft-fp/extendsfdf2.c (FP_NO_EXACT_UNDERFLOW): Likewise.
* soft-fp/extendsftf2.c (FP_NO_EXACT_UNDERFLOW): Likewise.
* soft-fp/extendxftf2.c (__extendxftf2): Use
FP_INIT_TRAPPING_EXCEPTIONS instead of FP_INIT_ROUNDMODE.
As noted in
<https://sourceware.org/ml/libc-alpha/2013-10/msg00516.html>, the
soft-fp macro FP_CLEAR_EXCEPTIONS should not be necessary, as soft-fp
code should never set an exception and later clear it.
In fact, all four uses in glibc (for SPARC) are indeed unnecessary:
they appear in files that convert 32-bit or 64-bit integers to IEEE
binary128, an operation that can never raise any exceptions. If this
was intended to enable the compiler to optimize away any FP_FROM_INT
code testing for exceptional cases, we now have a better way of doing
this: defining FP_NO_EXCEPTIONS before including soft-fp.h causes all
code handling exceptions to be stubbed out, and the rounding mode to
be hardwired for round-to-zero, to allow such optimizations for source
files where (a) the operation in question, for the particular types in
question, can never raise exceptions, but (b) some instances of the
operation for other types can, so the macros used in the file do
contain references to rounding or exceptions, albeit dead in that
particular file.
The uses in the Linux kernel are also unnecessary (clearing exceptions
at a point where they are already cleared).
This patch duly removes FP_CLEAR_EXCEPTIONS, making the SPARC code in
question use FP_NO_EXCEPTIONS and stop using exception-related macros.
* soft-fp/soft-fp.h (FP_CLEAR_EXCEPTIONS): Remove macro.
* sysdeps/sparc/sparc32/soft-fp/q_itoq.c: Define FP_NO_EXCEPTIONS.
(_Q_itoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
* sysdeps/sparc/sparc32/soft-fp/q_lltoq.c: Define FP_NO_EXCEPTIONS.
(_Q_lltoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
* sysdeps/sparc/sparc32/soft-fp/q_ulltoq.c: Define FP_NO_EXCEPTIONS.
(_Q_ulltoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
* sysdeps/sparc/sparc32/soft-fp/q_utoq.c: Define FP_NO_EXCEPTIONS.
(_Q_utoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
This patch fixes formatting of comments in soft-fp (in particular, the
normal style in glibc does not have a leading '*' on each line, and
comments should start with capital letters and end with ". */").
Tested for powerpc-nofpu that the disassembly of installed shared
libraries is unchanged by this patch.
* soft-fp/extended.h: Fix comment formatting.
* soft-fp/op-1.h: Likewise.
* soft-fp/op-2.h: Likewise.
* soft-fp/op-4.h: Likewise.
* soft-fp/op-8.h: Likewise.
* soft-fp/op-common.h: Likewise.
* soft-fp/soft-fp.h: Likewise.
IEEE 754-2008 defines two ways in which tiny results can be detected,
"before rounding" (based on the infinite-precision result) and "after
rounding" (based on the result when rounded to normal precision as if
the exponent range were unbounded). All binary operations on an
architecture must use the same choice of how tininess is detected.
soft-fp has so far implemented only before-rounding tininess
detection. This patch adds support for after-rounding tininess
detection. A new macro _FP_TININESS_AFTER_ROUNDING is added that
sfp-machine.h must define (soft-fp is meant to be self-contained so
the existing tininess.h files aren't used here, though the information
going in sfp-machine.h has been taken from them). The soft-fp macros
dealing with raising underflow exceptions then handle the cases where
the choice matters specially, rounding a copy of the input to the
appropriate precision to see if a value that's tiny before rounding
isn't tiny after rounding.
Tested for mips64 using GCC trunk (which now uses soft-fp on MIPS, so
supporting exceptions and rounding modes for long double where not
previously supported - this is the immediate motivation for doing this
patch now) together with (a) a patch to sysdeps/mips/math-tests.h to
enable exceptions / rounding modes tests for long double for GCC 4.9
and later, and (b) corresponding changes applied to libgcc's soft-fp
and sfp-machine.h files. In the libgcc context this is also tested on
x86_64 (also an after-rounding architecture) with testcases for
__float128 that I intend to add to the GCC testsuite when updating
soft-fp there.
(To be clear: this patch does not fix any glibc bugs that were
user-visible in past releases, since after-rounding architectures
didn't use soft-fp in any affected case with support for
floating-point exceptions - so there is no corresponding Bugzilla bug.
Rather, it works together with the GCC changes to use soft-fp on MIPS
to allow previously absent long double functionality to work properly,
and allows soft-fp to be used in glibc on after-rounding architectures
in cases where it couldn't previously be used.)
* soft-fp/op-common.h (_FP_DECL): Mark exponent as possibly
unused.
(_FP_PACK_SEMIRAW): Determine tininess based on rounding shifted
value if _FP_TININESS_AFTER_ROUNDING and unrounded value is in
subnormal range.
(_FP_PACK_CANONICAL): Determine tininess based on rounding to
normal precision if _FP_TININESS_AFTER_ROUNDING and unrounded
value has largest subnormal exponent.
* soft-fp/soft-fp.h [FP_NO_EXCEPTIONS]
(_FP_TININESS_AFTER_ROUNDING): Undefine and redefine to 0.
* sysdeps/aarch64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): New macro.
* sysdeps/alpha/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/arm/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/mips/mips64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/mips/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/powerpc/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sh/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/tile/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* soft-fp/soft-fp.h (FP_CUR_EXCEPTIONS): Define.
(FP_TRAPPING_EXCEPTIONS): Provide default implementation.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h
(FP_TRAPPING_EXCEPTIONS): Define.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h
(FP_TRAPPING_EXCEPTIONS): Define.
* soft-fp/op-common.h (_FP_PACK_SEMIRAW): Signal underflow for
subnormals only when inexact has been signalled or underflow
exceptions are enabled.
(_FP_PACK_CANONICAL): Likewise.
New macros.
* sysdeps/x86_64/soft-fp/sfp-machine.h: Likewise.
* soft-fp/soft-fp.h: Allow sfp-machine.h to define FP_RND_NEAREST
without defining FP_ROUNDMODE.
2001-07-06 Paul Eggert <eggert@twinsun.com>
* manual/argp.texi: Remove ignored LGPL copyright notice; it's
not appropriate for documentation anyway.
* manual/libc-texinfo.sh: "Library General Public License" ->
"Lesser General Public License".
2001-07-06 Andreas Jaeger <aj@suse.de>
* All files under GPL/LGPL version 2: Place under LGPL version
2.1.
* configure.in: Compute sizeof-long-double.
* configure: Regenerated.
* config.make.in: Make sizeof-long-double available to sub-makes.
In libc/soft-fp/:
* soft-fp.h (_FP_ROUND_ZERO): Cast 0 to void before using it
as a statement.
* sysdeps/powerpc/Makefile (routines): New file.
* sysdeps/powerpc/q_*: New files.
2000-03-03 Geoff Keating <geoffk@cygnus.com>
* configure.in: Compute sizeof-long-double.
* configure: Regenerated.
* config.make.in: Make sizeof-long-double available to sub-makes.
2000-01-04 Andreas Jaeger <aj@suse.de>
* nss/nss_db/dummy-db.h (struct db24): Add missing field flags.
(struct db27): Add missing fields byteswapped, join and flags;
remove wrong member handleq.
(struct dbc27): Correct lock field.
* nss/makedb.c: Remove __P.
2000-01-04 Andreas Jaeger <aj@suse.de>
* nss/nss_db/db-open.c (internal_setent): Check for db_open for
success, fix a memory leak and clean up function.
2000-01-04 Ulrich Drepper <drepper@cygnus.com>
* Makefile (install): Pass $(install_root) to ldconfig.
Patch by Akira YOSHIYAMA <yosshy@tkf.att.ne.jp>.
2000-01-03 Jakub Jelinek <jakub@redhat.com>
* soft-fp/op-1.h: Fix division for machines using not normalizing
version of udiv_qrnnd in longlong.h.
* soft-fp/sysdeps/mips/sfp-machine.h: Likewise.
* soft-fp/sysdeps/mips/mips64/sfp-machine.h: Likewise.
* soft-fp/sysdeps/sparc/sparc64/sfp-machine.h: Likewise.
Patch by Eddie C. Dost <ecd@skynet.be>.
* soft-fp/soft-fp.h (QItype, UQItype): New types used by longlong.h.
2000-01-03 Andreas Schwab <schwab@suse.de>
* sysdeps/generic/dl-sysdep.c: Initialize __libc_multiple_libcs,
needed for change in common symbol handing in newer binutils.
1999-12-29 Ulrich Drepper <drepper@cygnus.com>
* soft-fp/*: Tons of new files to implement floating-point arithmetic
in software.
Contributed by Richard Henderson, Jakub Jelinek and others.
