WG14 decided to use the name C23 as the informal name of the next
revision of the C standard (notwithstanding the publication date in
2024). Update references to C2X in glibc to use the C23 name.
This is intended to update everything *except* where it involves
renaming files (the changes involving renaming tests are intended to
be done separately). In the case of the _ISOC2X_SOURCE feature test
macro - the only user-visible interface involved - support for that
macro is kept for backwards compatibility, while adding
_ISOC23_SOURCE.
Tested for x86_64.
These describe generic AArch64 CPU features, and are not tied to a
kernel-specific way of determining them. We can share them between
the Linux and Hurd AArch64 ports.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240103171502.1358371-13-bugaevc@gmail.com>
Includes test for setcontext too.
The test directly checks after longjmp if ZA got disabled and the
ZA contents got saved following the lazy saving scheme. It does not
use ACLE code to verify that gcc can interoperate with glibc.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For the ZA lazy saving scheme to work, longjmp has to call
__libc_arm_za_disable.
In ld.so we assume ZA is not used so longjmp does not need
special support there.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The runtime support routines for the call ABI of the Scalable Matrix
Extension (SME) are mostly in libgcc. Since libc.so cannot depend on
libgcc_s.so have an implementation of __arm_za_disable in libc for
libc internal use in longjmp and similar APIs.
__libc_arm_za_disable follows the same PCS rules as __arm_za_disable,
but it's a hidden symbol so it does not need variant PCS marking.
Using __libc_fatal instead of abort because it can print a message and
works in ld.so too. But for now we don't need SME routines in ld.so.
To check the SME HWCAP in asm, we need the _dl_hwcap2 member offset in
_rtld_global_ro in the shared libc.so, while in libc.a the _dl_hwcap2
object is accessed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Added annotations for autovec by GCC and GFortran - this enables GCC
>= 9 to autovectorise math calls at -Ofast.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Compilers may emit calls to 'half-width' routines (two-lane
single-precision variants). These have been added in the form of
wrappers around the full-width versions, where the low half of the
vector is simply duplicated. This will perform poorly when one lane
triggers the special-case handler, as there will be a redundant call
to the scalar version, however this is expected to be rare at Ofast.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The .cfi_return_column directive changes the return column for the whole
FDE range. But the actual intent is to tell the unwinder that the value
in x30 (lr) now resides in x15 after the move, and that is expressed by
the .cfi_register directive.
These were broken by the new atan2 functions, as they were only
set up for univariate functions. Arity is now detected from the
input file - this revealed a mistake that the double-precision
inputs were being used for both single- and double-precision
routines, which is now remedied.
The _dl_non_dynamic_init does not parse LD_PROFILE, which does not
enable profile for dlopen objects. Since dlopen is deprecated for
static objects, it is better to remove the support.
It also allows to trim down libc.a of profile support.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The latest implementations of memcpy are actually faster than the Falkor
implementations [1], so remove the falkor/phecda ifuncs for memcpy and
the now unused IS_FALKOR/IS_PHECDA defines.
[1] https://sourceware.org/pipermail/libc-alpha/2022-December/144227.html
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add a specialized memset for the common ZVA size of 64 to avoid the
overhead of reading the ZVA size. Since the code is identical to
__memset_falkor, remove the latter.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cleanup emag memset - merge the memset_base64.S file, remove
the unused ZVA code (since it is disabled on emag).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cleanup ifuncs. Remove uses of libc_hidden_builtin_def, use ENTRY rather than
ENTRY_ALIGN, remove unnecessary defines and conditional compilation. Rename
strlen_mte to strlen_generic. Remove rtld-memset.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Add support for MOPS in cpu_features and INIT_ARCH. Add ifuncs using MOPS for
memcpy, memmove and memset (use .inst for now so it works with all binutils
versions without needing complex configure and conditional compilation).
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* Transpose table layout for improved memory access
* Use half-vector special comparisons for AdvSIMD
* Improve register use near special-case branches
- Due to the presence of a function call, return value would get
mov-d out of x0 in order to facilitate PCS. By moving the final
computation after the branch this can be avoided
Also change SVE routines to use overloaded intrinsics for readability.
Use overloaded intrinsics for readability. Codegen does not
change, however while we're bringing the routines up-to-date with
recent improvements to other routines in AOR it is worth copying
this change over as well.
* Update ULP comment reflecting a new observed max in [-pi/2, pi/2]
* Use the same polynomial in AdvSIMD and SVE, rather than FTRIG instructions
* Improve register use near special-case branch
Also use overloaded intrinsics for SVE.
Remove the unnecessary extra checks for sin (-0.0) from vector sin/sinf,
improving performance. Passes regress.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Bump autoconf requirement to 2.71 to allow regenerating configure on
more recent distributions. autoconf 2.71 has been in Fedora since F36
and is the current version in Debian stable (bookworm). It appears to
be current in Gentoo as well.
All sysdeps configure and preconfigure scripts have also been
regenerated; all changes are trivial transformations that do not affect
functionality.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines. Log lookup table
added as HIDDEN symbol to allow it to be shared between AdvSIMD and
SVE variants.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Replace the loop-over-scalar placeholder routines with optimised
implementations from Arm Optimized Routines (AOR).
Also add some headers containing utilities for aarch64 libmvec
routines, and update libm-test-ulps.
Data tables for new routines are used via a pointer with a
barrier on it, in order to prevent overly aggressive constant
inlining in GCC. This allows a single adrp, combined with offset
loads, to be used for every constant in the table.
Special-case handlers are marked NOINLINE in order to confine the
save/restore overhead of switching from vector to normal calling
standard. This way we only incur the extra memory access in the
exceptional cases. NOINLINE definitions have been moved to
math_private.h in order to reduce duplication.
AOR exposes a config option, WANT_SIMD_EXCEPT, to enable
selective masking (and later fixing up) of invalid lanes, in
order to trigger fp exceptions correctly (AdvSIMD only). This is
tested and maintained in AOR, however it is configured off at
source level here for performance reasons. We keep the
WANT_SIMD_EXCEPT blocks in routine sources to greatly simplify
the upstreaming process from AOR to glibc.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
arm_sve.h depends on stdint.h but that relies on libc headers unless
compiled in freestanding mode. Without this change a bootstrap glibc
build (that uses a compiler without installed libc headers) failed with
checking for availability of SVE ACLE... In file included from [...]/arm_sve.h:28,
from conftest.c:1:
[...]/stdint.h:9:16: fatal error: stdint.h: No such file or directory
9 | # include_next <stdint.h>
| ^~~~~~~~~~
compilation terminated.
configure: error: mathvec is enabled but compiler does not have SVE ACLE. [...]
This patch enables libmvec on AArch64. The proposed change is mainly
implementing build infrastructure to add the new routines to ABI,
tests and benchmarks. I have demonstrated how this all fits together
by adding implementations for vector cos, in both single and double
precision, targeting both Advanced SIMD and SVE.
The implementations of the routines themselves are just loops over the
scalar routine from libm for now, as we are more concerned with
getting the plumbing right at this point. We plan to contribute vector
routines from the Arm Optimized Routines repo that are compliant with
requirements described in the libmvec wiki.
Building libmvec requires minimum GCC 10 for SVE ACLE. To avoid raising
the minimum GCC by such a big jump, we allow users to disable libmvec
if their compiler is too old.
Note that at this point users have to manually call the vector math
functions. This seems to be acceptable to some downstream users.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Fix the computation to allow for cntfrq_el0 being larger than 1GHz.
Assume cntfrq_el0 is a multiple of 1MHz to increase the maximum
interval (1024 seconds at 1GHz).
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Although static linker can optimize it to local call, it follows the
internal scheme to provide hidden proto and definitions.
Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
Although static linker can optimize it to local call, it follows the
internal scheme to provide hidden proto and definitions.
Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
