Only the placeholder compatibility symbols are left now.
The __errno_location symbol was removed (moved) using
scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The elision interfaces are closely aligned between the targets that
implement them, so declare them in the generic <lowlevellock.h>
file.
Empty .c stubs are provided, so that fewer makefile updates
under sysdeps are needed. Also simplify initialization via
__libc_early_init.
The symbols __lll_clocklock_elision, __lll_lock_elision,
__lll_trylock_elision, __lll_unlock_elision, __pthread_force_elision
move into libc. For the time being, non-hidden references are used
from libpthread to access them, but once that part of libpthread
is moved into libc, hidden symbols will be used again. (Hidden
references seem desirable to reduce the likelihood of transactions
aborts.)
This patch moves the vDSO setup from libc to loader code, just after
the vDSO link_map setup. For static case the initialization
is moved to _dl_non_dynamic_init instead.
Instead of using the mangled pointer, the vDSO data is set as
attribute_relro (on _rtld_global_ro for shared or _dl_vdso_* for
static). It is read-only even with partial relro.
It fixes BZ#24967 now that the vDSO pointer is setup earlier than
malloc interposition is called.
Also, vDSO calls should not be a problem for static dlopen as
indicated by BZ#20802. The vDSO pointer would be zero-initialized
and the syscall will be issued instead.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, powerpc64le-linux-gnu, powerpc64-linux-gnu,
powerpc-linux-gnu, s390x-linux-gnu, sparc64-linux-gnu, and
sparcv9-linux-gnu. I also run some tests on mips.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
__ppc_get_timebase_freq() always return 0 when using static linked
glibc.
This is a minimal example.c to reproduce:
/******************************/
#include <inttypes.h>
#include <stdint.h>
#include <stdio.h>
#include <sys/platform/ppc.h>
int main() {
uint64_t freq = __ppc_get_timebase_freq();
printf("Time Base frequency = %"PRIu64" Hz\n", freq);
if (freq == 0)
return -1;
return 0;
}
/******************************/
Compile command: gcc -static example.c
This bug has been reproduced, fixed and tested on all powerpc platforms
(ppc32, ppc64 and ppc64le).
The underlying code of __ppc_get_timebase_freq uses __get_timebase_freq
that has a different implementation for shared and static version of
glibc. In the static version, there is an incorrect sense in the if
check for the fd returned when opening /proc/cpuinfo.
This solution is mostly a cherry-pick from:
commit 4791e4f773d060c1a37b27aac5b03cdfa9327afc
Author: Stan Shebs <stanshebs@google.com>
Date: Fri May 17 12:25:19 2019 -0700
Subject: Fix sense of a test in the static-linking version of ppc get_clockfreq
That is in branch glibc/google/grte/v5-2.27/master and was mentioned for
inclusion on master here:
https://www.sourceware.org/ml/libc-alpha/2019-05/msg00409.html
Adapted from original fix for get_clockfreq. That code was moved to
get_timebase_freq.
Also added a static-build testcase for __ppc_get_timebase_freq since the
underlying function has different implementations for shared and static
build.
[BZ #24640]
* sysdeps/unix/sysv/linux/powerpc/get_timebase_freq.c
[!SHARED] (__get_timebase_freq): Fix sense of a test in the
static-linking version.
* sysdeps/unix/sysv/linux/powerpc/Makefile
(tests-static): Add test-gettimebasefreq-static.
(tests): Likewise.
* sysdeps/unix/sysv/linux/powerpc/test-gettimebasefreq-static.c:
New file.
This patch consolidates the Linux termios.h by removing the arch-specific
one.
No semantic change is expected, checked on a build against x86_64-linux-gnu,
alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu.
* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
bits/termios-misc.h.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h: Remove file.
* sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise.
* sysdeps/unix/sysv/linux/bits/termios-misc.h: New file.
* sysdeps/unix/sysv/linux/bits/termios.h: Include termios-misc.h.
There is currently no "cross-platform" (x86 and POWER) support for
determining the cacheline size.
This patch adds support to sysconf() to correctly report cacheline sizes
based on the information in the auxilliary vector.
Thus, using sysconf() is a cross-platform (x86 and POWER) solution for
determining cacheline sizes.
Support is added (on powerpc) for:
_SC_LEVEL1_ICACHE_SIZE _SC_LEVEL1_ICACHE_ASSOC _SC_LEVEL1_ICACHE_LINESIZE
_SC_LEVEL1_DCACHE_SIZE _SC_LEVEL1_DCACHE_ASSOC _SC_LEVEL1_DCACHE_LINESIZE
_SC_LEVEL2_CACHE_SIZE _SC_LEVEL2_CACHE_ASSOC _SC_LEVEL2_CACHE_LINESIZE
_SC_LEVEL3_CACHE_SIZE _SC_LEVEL3_CACHE_ASSOC _SC_LEVEL3_CACHE_LINESIZE
* sysdeps/unix/sysv/linux/powerpc/sysconf.c: New file.
Add powerpc-specific overrides for L1, L2, L3 CACHE_SIZEs,
CACHE_ASSOCs, and CACHE_LINESIZEs, retrieving from auxv.
* sysdeps/unix/sysv/linux/powerpc/test-powerpc-linux-sysconf.c:
New file. Invoke newly supported sysconf values for powerpc,
and report results. If none are supported, report so.
* sysdeps/unix/sysv/linux/powerpc/Makefile (tests): Add new test,
tst-sysconf.
This patch is glibc support for a PowerPC TLS optimization, inspired
by Alexandre Oliva's TLS optimization for other processors,
http://www.lsd.ic.unicamp.br/~oliva/writeups/TLS/RFC-TLSDESC-x86.txt
In essence, this optimization uses a zero module id in the tls_index
GOT entry to indicate that a TLS variable is allocated space in the
static TLS area. A special plt call linker stub for __tls_get_addr
checks for such a tls_index and if found, returns the offset
immediately. The linker communicates the fact that the special
__tls_get_addr stub is used by setting a bit in the dynamic tag
DT_PPC64_OPT/DT_PPC_OPT. glibc communicates to the linker that this
optimization is available by the presence of __tls_get_addr_opt.
tst-tlsmod2.so is built with -Wl,--no-tls-get-addr-optimize for
tst-tls-dlinfo, which otherwise would fail since it tests that no
static tls is allocated. The ld option --no-tls-get-addr-optimize has
been available since binutils-2.20 so doesn't need a configure test.
* NEWS: Advertise TLS optimization.
* elf/elf.h (R_PPC_TLSGD, R_PPC_TLSLD, DT_PPC_OPT, PPC_OPT_TLS): Define.
(DT_PPC_NUM): Increment.
* elf/dynamic-link.h (HAVE_STATIC_TLS): Define.
(CHECK_STATIC_TLS): Use here.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Optimize
TLS descriptors.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/powerpc/dl-tls.c: New file.
* sysdeps/powerpc/Versions: Add __tls_get_addr_opt.
* sysdeps/powerpc/tst-tlsopt-powerpc.c: New tls test.
* sysdeps/unix/sysv/linux/powerpc/Makefile: Add new test.
Build tst-tlsmod2.so with --no-tls-get-addr-optimize.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist: Likewise.
This patch adds support for lock elision using ISA 2.07 hardware
transactional memory instructions for pthread_mutex primitives.
Similar to s390 version, the for elision logic defined in
'force-elision.h' is only enabled if ENABLE_LOCK_ELISION is defined.
Also, the lock elision code should be able to be built even with
a compiler that does not provide HTM support with builtins.
However I have noted the performance is sub-optimal due scheduling
pressures.
This patch eliminates the mixture of SONAME information in
shlib-versions files and SONAME information used to generate
gnu/lib-names.h in makefiles, with the information in the makefiles
being removed so all this information comes from the shlib-versions
files.
So that gnu/lib-names.h supports multiple ABIs, it is changed to be
generated on the same basis as gnu/stubs.h: when there are multiple
ABIs, gnu/lib-names.h is a wrapper header (the same header installed
whatever ABI is being built) and separate headers such as
gnu/lib-names-64.h contain the substantive contents (only one such
header being installed by any glibc build).
The rules for building gnu/lib-names.h were moved from Makeconfig to
Makerules because they need to come after sysdeps makefiles are
included (now that "ifndef abi-variants" is a toplevel conditional on
the rules rather than $(abi-variants) being evaluated later inside the
commands for a rule).
Tested for x86_64 and x86 that the installed shared libraries are
unchanged by this patch, and examined the installed gnu/lib-names*.h
headers by hand. Also tested the case of a single ABI (where there is
just a single header installed, again like stubs.h) by hacking
abi-variants to empty for x86_64.
[BZ #14171]
* Makeconfig [$(build-shared) = yes]
($(common-objpfx)soversions.mk): Don't handle SONAMEs specified in
makefiles.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.h): Remove rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.stmp): Likewise. Split and moved
to Makerules.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(before-compile): Don't append $(common-objpfx)gnu/lib-names.h
here.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Don't append gnu/lib-names.h and
gnu/lib-names.stmp here.
* Makerules [$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-h-abi): New variable.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-stmp-abi): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (before-compile): Append
$(common-objpfx)$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (common-generated): Append gnu/lib-names.h.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (install-others-nosubdir): Depend on
$(inst_includedir)/$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] ($(common-objpfx)gnu/lib-names.h): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-h-abi)): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-stmp-abi)): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Append $(lib-names-h-abi) and
$(lib-names-stmp-abi).
* scripts/lib-names.awk: Do not handle multi being set.
* sysdeps/unix/sysv/linux/aarch64/Makefile (abi-lp64-ld-soname):
Remove variable.
(abi-lp64_be-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile (abi-soft-ld-soname):
Likewise.
(abi-hard-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/i386/shlib-versions: New file.
* sysdeps/unix/sysv/linux/mips/Makefile (abi-o32_soft-ld-soname):
Remove variable.
(abi-o32_hard-ld-soname): Likewise.
(abi-o32_soft_2008-ld-soname): Likewise.
(abi-o32_hard_2008-ld-soname): Likewise.
(abi-n32_soft-ld-soname): Likewise.
(abi-n32_hard-ld-soname): Likewise.
(abi-n32_soft_2008-ld-soname): Likewise.
(abi-n32_hard_2008-ld-soname): Likewise.
(abi-n64_soft-ld-soname): Likewise.
(abi-n64_hard-ld-soname): Likewise.
(abi-n64_soft_2008-ld-soname): Likewise.
(abi-n64_hard_2008-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/Makefile (abi-64-v1-ld-soname):
Likewise.
(abi-64-v2-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Add
ld.so entries.
* sysdeps/unix/sysv/linux/s390/Makefile (abi-64-ld-soname): Remove
variable.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86/Makefile (abi-32-ld-soname): Remove
variable.
(abi-64-ld-soname): Likewise.
(abi-x32-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
To avoid having a ELFv2 binary accidentally picking up an old ABI ld.so,
this patch bumps the soname to ld64.so.2.
In theory (or for testing purposes) this will also allow co-installing
ld.so versions for both ABIs on the same system. Note that the kernel
will already be able to load executables of both ABIs. However, there
is currently no plan to use that theoretical possibility in a any
supported distribution environment ...
Note that in order to check which ABI to use, we need to invoke the
compiler to check the _CALL_ELF macro; this is done in a new configure
check in sysdeps/unix/sysv/linux/powerpc/powerpc64/configure.ac,
replacing the hard-coded value of default-abi in the Makefile.
This patch fixes dlfcn/tststatic5 for PowerPC where pagesize
variable was not properly initialized in certain cases. This patch
is based on other architecture code.
Tom Gall <tom_gall@vnet.ibm.com>
* elf/rtld.c (dl_main): Initialize l_local_scope for sysinfo_map.
* sysdeps/powerpc/elf/libc-start.c: Move this...
* sysdeps/unix/sysv/linux/powerpc/libc-start.c: ...to here.
* sysdeps/powerpc/powerpc32/dl-start.S: Add _dl_main_dispatch label.
* sysdeps/powerpc/powerpc32/hp-timing.h: New file.
* sysdeps/unix/sysv/linux/powerpc/Versions: New file.
* sysdeps/unix/sysv/linux/clock_getres.c: If HAVE_CLOCK_GETRES_VSYSCALL
is not defined, redefine INTERNAL_VSYSCALL and INLINE_VSYSCALL to
INTERNAL_SYSCALL and INLINE_SYSCALL respectively. Otherwise include
<bits/libc-vdso.h>. Use INLINE_VSYSCALL and INTERNAL_SYSCALL instead
of the normal versions throughout the code.
* sysdeps/unix/sysv/linux/clock_gettime.c: Likewise if
HAVE_CLOCK_GETTIME_VSYSCALL is defined.
* sysdeps/unix/sysv/linux/powerpc/bits/libc-vdso.h: New file.
* sysdeps/unix/sysv/linux/powerpc/dl-vdso.c: New file.
* sysdeps/unix/sysv/linux/powerpc/dl-vdso.h: New file.
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c: Use vDSO.
* sysdeps/unix/sysv/linux/powerpc/gettimeofday.c: New file.
* sysdeps/unix/sysv/linux/powerpc/Makefile: Add dl-vdso to routines.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h: Define
INLINE_VSYSCALL, INTERNAL_VSYSCALL, INTERNAL_SYSCALL_NCS,
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK, HAVE_CLOCK_GETRES_VSYSCALL,
and HAVE_CLOCK_GETTIME_VSYSCALL.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h: Likewise.
* sysdeps/unix/sysv/linux/Makefile
($(objpfx)syscall-%.h $(objpfx)syscall-%.d): Take code from
sparc/Makefile to produce a bi-arch file as needed.
That's now parameterized by the variable $(64bit-predefine).
Use LC_ALL=C for `comm' commands in that rule.
No longer conditional on [$(no_syscall_list_h)].
* sysdeps/unix/sysv/linux/sparc/Makefile: Remove replacement rules.
(64bit-predefine): New variable.
* sysdeps/unix/sysv/linux/x86_64/Makefile: Likewise.
* sysdeps/unix/sysv/linux/s390/Makefile: New file.
* sysdeps/unix/sysv/linux/powerpc/Makefile
(64bit-predefine): New variable.
2002-10-15 Roland McGrath <roland@redhat.com>
* sysdeps/unix/sysv/linux/Makefile
($(objpfx)syscall-%.h $(objpfx)syscall-%.d)
* login/utmp-private.h: Declare __libc_utmp_lock.
* sysdeps/unix/getlogin_r.c (getlogin_r): Take __libc_utmp_lock once
call __libc_utmp_jump_table functions directly, instead of using
__setutent et al.
* sysdeps/unix/sysv/linux/configure.in: Use case instead of if.
* sysdeps/unix/sysv/linux/configure: Regenerated.
2002-07-29 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/__longjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/__longjmp.S: ...here.
* sysdeps/powerpc/add_n.S: Moved to...
* sysdeps/powerpc/powerpc32/add_n.S: ...here.
* sysdeps/powerpc/addmul_1.S: Moved to...
* sysdeps/powerpc/powerpc32/addmul_1.S: ...here.
* sysdeps/powerpc/atomicity.h: Moved to...
* sysdeps/powerpc/powerpc32/atomicity.h: ...here.
* sysdeps/powerpc/backtrace.c: Moved to...
* sysdeps/powerpc/powerpc32/backtrace.c: ...here.
* sysdeps/powerpc/bp-asm.h: Moved to...
* sysdeps/powerpc/powerpc32/bp-asm.h: ...here.
* sysdeps/powerpc/bsd-_setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/bsd-_setjmp.S: ...here.
* sysdeps/powerpc/bsd-setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/bsd-setjmp.S: ...here.
* sysdeps/powerpc/dl-machine.c: Moved to...
* sysdeps/powerpc/powerpc32/dl-machine.c: ...here.
* sysdeps/powerpc/dl-machine.h: Moved to...
* sysdeps/powerpc/powerpc32/dl-machine.h: ...here.
* sysdeps/powerpc/dl-start.S: Moved to...
* sysdeps/powerpc/powerpc32/dl-start.S: ...here.
* sysdeps/powerpc/gprrest0.S: Moved to...
* sysdeps/powerpc/powerpc32/gprrest0.S: ...here.
* sysdeps/powerpc/gprrest1.S: Moved to...
* sysdeps/powerpc/powerpc32/gprrest1.S: ...here.
* sysdeps/powerpc/gprsave0.S: Moved to...
* sysdeps/powerpc/powerpc32/gprsave0.S: ...here.
* sysdeps/powerpc/gprsave1.S: Moved to...
* sysdeps/powerpc/powerpc32/gprsave1.S: ...here.
* sysdeps/powerpc/lshift.S: Moved to...
* sysdeps/powerpc/powerpc32/lshift.S: ...here.
* sysdeps/powerpc/memset.S: Moved to...
* sysdeps/powerpc/powerpc32/memset.S: ...here.
* sysdeps/powerpc/mul_1.S: Moved to...
* sysdeps/powerpc/powerpc32/mul_1.S: ...here.
* sysdeps/powerpc/ppc-mcount.S: Moved to...
* sysdeps/powerpc/powerpc32/ppc-mcount.S: ...here.
* sysdeps/powerpc/register-dump.h: Moved to...
* sysdeps/powerpc/powerpc32/register-dump.h: ...here.
* sysdeps/powerpc/rshift.S: Moved to...
* sysdeps/powerpc/powerpc32/rshift.S: ...here.
* sysdeps/powerpc/setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/setjmp.S: ...here.
* sysdeps/powerpc/stpcpy.S: Moved to...
* sysdeps/powerpc/powerpc32/stpcpy.S: ...here.
* sysdeps/powerpc/strchr.S: Moved to...
* sysdeps/powerpc/powerpc32/strchr.S: ...here.
* sysdeps/powerpc/strcmp.S: Moved to...
* sysdeps/powerpc/powerpc32/strcmp.S: ...here.
* sysdeps/powerpc/strcpy.S: Moved to...
* sysdeps/powerpc/powerpc32/strcpy.S: ...here.
* sysdeps/powerpc/strlen.S: Moved to...
* sysdeps/powerpc/powerpc32/strlen.S: ...here.
* sysdeps/powerpc/sub_n.S: Moved to...
* sysdeps/powerpc/powerpc32/sub_n.S: ...here.
* sysdeps/powerpc/submul_1.S: Moved to...
* sysdeps/powerpc/powerpc32/submul_1.S: ...here.
* sysdeps/powerpc/elf/bzero.S: Moved to...
* sysdeps/powerpc/powerpc32/elf/bzero.S: ...here.
* sysdeps/powerpc/elf/start.S: Moved to...
* sysdeps/powerpc/powerpc32/elf/start.S: ...here.
* sysdeps/powerpc/fpu/__longjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/__longjmp.S: ...here.
* sysdeps/powerpc/fpu/fprrest.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/fprrest.S: ...here.
* sysdeps/powerpc/fpu/fprsave.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/fprsave.S: ...here.
* sysdeps/powerpc/fpu/setjmp.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/setjmp.S: ...here.
* sysdeps/powerpc/fpu/s_copysign.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: ...here.
* sysdeps/powerpc/fpu/s_copysignf.S: Moved to...
* sysdeps/powerpc/powerpc32/fpu/s_copysignf.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/brk.S: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/brk.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/clone.S: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/glob64.c: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/glob64.c: ...here.
* sysdeps/unix/sysv/linux/powerpc/kernel_stat.h: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/kernel_stat.h: ...here.
* sysdeps/unix/sysv/linux/powerpc/socket.S: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/socket.S: ...here.
* sysdeps/unix/sysv/linux/powerpc/sysdep.h: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h: ...here.
* sysdeps/unix/sysv/linux/powerpc/syscalls.list: Moved to...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: ...here.
Support PowerPC64. Separate powerpc into powerpc/powerpc32 and
powerpc/powerpc64.
2002-07-29 Steven Munroe <sjmunroe@us.ibm.com>
* FAQ.in: Add powerpc64 to supported targets list. Also state the
minimum gcc version is 3.2
* README: Add powerpc64 to supported targets list.
* configure.in: Change machine=powerpc to machine=powerpc/powerpc32.
Add powerpc64 and machine=powerpc/powerpc64.
(HAVE_ASM_GLOBAL_DOT_NAME): Define if linux*powerpc/powerpc64*.
* shlib-versions: Set DEFAULT version to 2.2.5 for powerpc64.
* sysdeps/powerpc/Dist: Remove dl-machine.c, dl-start.S, ppc-mcount.S,
gprsave1.S, gprsave0.S, gprrest1.S, and gprrest0.S.
* sysdeps/powerpc/powerpc32/Dist: New file.
* sysdeps/powerpc/Implies: Remove wordsize-32 and powerpc/soft-fp.
* sysdeps/powerpc/powerpc32/Implies: New file.
* sysdeps/powerpc/Makefile(cflags): Remove powerpc32 specific cflags.
($(with-fp) = no): Move test to powerpc32/Makefile.
($(subdir) = misc): Move to powerpc32/Makefile.
($(build-shared) = yes): Move to powerpc32/Makefile.
($(subdir) = csu): Move to powerpc32/Makefile.
(sysdep-rtld-routines): Remove dl-start. Moved these bits to ...
* sysdeps/powerpc/powerpc32/Makefile: New file.
* sysdeps/powerpc/Versions: Remove libgcc functions.
* sysdeps/powerpc/powerpc32/Versions: New file.
* sysdeps/powerpc/fpu/Makefile: Remove fprsave and fprrest.
* sysdeps/powerpc/powerpc32/fpu/Makefile: New file.
* sysdeps/unix/sysv/linux/configure.in (powerpc*):
Set arch_minimum_kernel=2.4.19 for powerpc/powerpc64. Also set
libc_cv_gcc_unwind_find_fde=yes only if !powerpc/powerpc64.
($machine): Add powerpc/powerpc64 to if ... | for
libc_cv_slibdir=/libc64.
(powerpc*): Set ldd_rewrite_script.
* sysdeps/unix/sysv/linux/powerpc/ldd-rewrite.sed: New file.
* sysdeps/unix/sysv/linux/powerpc/Dist: Remove clone.S.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Dist: New file.
Add clone.S.
* sysdeps/unix/sysv/linux/powerpc/Makefile: Remove oldgetrlimit64.
* sysdeps/unix/sysv/linux/powerpc/Versions: Remove GLIBC_2.0
functions. Remove GLIBC_2.2 functions except getrlimit and
setrlimit. Moved them to ...
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Versions: New file.
2002-09-04 Ulrich Drepper <drepper@redhat.com>
* libio/tst-atime.c: Include <errno.h>.
(do_test): Only perform fstatvfs check if ST_NOATIME is defined.
2002-09-03 Isamu Hasegawa <isamu@yamato.ibm.com>
* posix/regcomp.c (regcomp): Append "__restrict" modifier to avoid
warnings of some compilers.
(build_collating_symbol): Change the type of characters from
"unsigned char" to "char", and append a cast to "char*" pointer in
array subscript.
(build_collating_symbol): Likewise.
(build_equiv_class): Likewise.
(build_charclass): Likewise.
(re_compile_pattern): Remove incorrect cast.
(re_compile_fastmap_iter): Change the type of characters from
"unsigned char" to "char", and append a cast to "char*" pointer
in array subscript.
(parse_bracket_exp): Likewise.
* posix/regex_internal.c (re_string_construct_common): Likewise.
(re_string_allocate): Likewise.
(re_string_construct): Likewise.
(re_string_realloc_buffers): Likewise.
(build_wcs_buffer): Likewise.
(re_string_reconstruct): Likewise.
* posix/regex_internal.h: Change the type of characters in
re_string_t and bracket_elem_t from "unsigned char" to "char".
* posix/regexec.c (regexec): Append "__restrict" modifier to avoid
warnings of some compilers.
(transit_state_bkref_loop): Change the type of characters from
"unsigned char" to "char", and append a cast to "char*" pointer in
array subscript.
(check_node_accept_bytes): Likewise.
(find_collation_sequence_value): Likewise.
