Provide a 64-bit-time version of __difftime (but do not assume
__time64_t is a signed int so that Gnulib can reuse the code)
and make the 32-bit version a wrapper of it.
Current difftime expects two time_t arguments and returns a
double. To preserve source-code compatibility, its 64-bit-time
equivalent expects two __time64_t arguments but still returns
a double.
This patch was tested by running 'make check' on branch
master then applying this patch and its two predecessors and
running 'make check' again, and checking that both 'make check'
yield identical results. This was done on x86_64-linux-gnu and
i686-linux-gnu.
This patch was also functionally tested with an ad hoc userland
C program which checks the result of difftime for various pairs
of 32-bit and, for 64-bit builds, of 64-bit time_t values too.
The program was built and run against a glibc with and without
the patch, and the results compared to ensure the patch does
not change the behavior of difftime.
* include/time.h (__difftime64): Add.
* time/difftime.c (subtract): convert to 64-bit time.
* time/difftime.c (__difftime64): Add.
* time/difftime.c (__difftime): Wrap around __difftime64.
After previous cleanups, the only code in the x86 bits/mathinline.h
that is relevant with current compilers is the inline of
__ieee754_atan2l that is conditional on __LIBC_INTERNAL_MATH_INLINES
(i.e. for when libm itself is being built).
This inline is something that does belong in glibc not GCC, since
__ieee754_atan2l is a purely internal function name. This patch moves
that inline to a new sysdeps/x86/fpu/math_private.h, removing the
bits/mathinline.h header.
Note that previously the inline was only for non-SSE 32-bit x86. That
condition does not make sense, however, for a long double function; if
it's not inlined, exactly the same x87 instruction will end up getting
used by the out-of-line function, for both 32-bit and 64-bit. So that
condition is not retained in the new version.
Tested for x86_64 and x86. As expected, installed stripped shared
libraries are unchanged for 32-bit x86, but installed stripped libm.so
is changed for x86_64 because calls to __ieee754_atan2l start being
inlined where previously they were out of line calls. (The same
change to start inlining the function would presumably also apply for
32-bit built with -mfpmath=sse, but that's not a configuration I've
tested.)
* sysdeps/x86/fpu/math_private.h: New file.
* sysdeps/x86/fpu/bits/mathinline.h: Remove.
Continuing the removal of bits/mathinline.h inlines that would better
be done by the compiler, this patch removes x86 inlines for sinh, cosh
and tanh functions (inlines only previously present for fast-math,
non-SSE 32-bit x86). I've filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88556> for adding such
inlines as an optimization in GCC.
I believe the only remaining part of the x86 bits/mathinline.h that
does anything useful with current compilers after this patch is the
__LIBC_INTERNAL_MATH_INLINES inline of __ieee754_atan2l; I intend to
remove the whole header and move that inline to a sysdeps
math_private.h header in a subsequent patch.
Tested for x86_64 and x86.
* sysdeps/x86/fpu/bits/mathinline.h (sinh): Remove inline
definition.
(cosh): Likewise.
(tanh): Likewise.
Add support for AT_L1I_CACHESIZE, AT_L1I_CACHEGEOMETRY,
AT_L1D_CACHESIZE, AT_L1D_CACHEGEOMETRY, AT_L2_CACHESIZE,
AT_L2_CACHEGEOMETRY, AT_L3_CACHESIZE and AT_L3_CACHEGEOMETRY when
LD_SHOW_AUXV=1.
AT_L*_CACHESIZE is printed as decimal and represent the number of
bytes of the cache.
AT_L*_CACHEGEOMETRY is treated in order to specify the cache line size
and its associativity.
Example output from a POWER8:
AT_L1I_CACHESIZE: 32768
AT_L1I_CACHEGEOMETRY: 128B line size, 8-way set associative
AT_L1D_CACHESIZE: 65536
AT_L1D_CACHEGEOMETRY: 128B line size, 8-way set associative
AT_L2_CACHESIZE: 524288
AT_L2_CACHEGEOMETRY: 128B line size, 8-way set associative
AT_L3_CACHESIZE: 8388608
AT_L3_CACHEGEOMETRY: 128B line size, 8-way set associative
Some of the new types are longer than the previous ones, requiring to
increase the indentation in order to keep the values aligned.
* elf/dl-sysdep.c (auxvars): Add AT_L1I_CACHESIZE,
AT_L1I_CACHEGEOMETRY, AT_L1D_CACHESIZE, AT_L1D_CACHEGEOMETRY,
AT_L2_CACHESIZE, AT_L2_CACHEGEOMETRY, AT_L3_CACHESIZE and
AT_L3_CACHEGEOMETRY. Fix indentation when printing the other
fields.
(_dl_show_auxv): Give a special treatment to
AT_L1I_CACHEGEOMETRY, AT_L1D_CACHEGEOMETRY, AT_L2_CACHEGEOMETRY
and AT_L3_CACHEGEOMETRY.
* sysdeps/powerpc/dl-procinfo.h (cache_geometry): New function.
(_dl_procinfo): Fix indentation when printing AT_HWCAP and
AT_HWCAP2. Add support for AT_L1I_CACHEGEOMETRY,
AT_L1D_CACHEGEOMETRY, AT_L2_CACHEGEOMETRY and AT_L3_CACHEGEOMETRY.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__ctime64_r): Add.
* time/ctime_r.c
(__ctime64_r): Add.
[__TIMESIZE != 64] (__ctime_r): Turn into a wrapper.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__ctime64): Add.
* time/gmtime.c
(__ctime64): Add.
[__TIMESIZE != 64] (ctime): Turn into a wrapper.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__gmtime64_r): Add.
* time/gmtime.c
(__gmtime64_r): Add.
[__TIMESIZE != 64] (__gmtime): Turn into a wrapper.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__gmtime64): Add.
* time/gmtime.c
(__gmtime64): Add.
[__TIMESIZE != 64] (__gmtime): Turn into a wrapper.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__localtime64_r): Add.
* time/localtime.c
(__localtime64_r): Add.
[__TIMESIZE != 64] (__localtime_r): Turn into a wrapper.
S390 kernel sigaction is the same as the Linux generic one.
Checked with a s390-linux-gnu and s390x-linux-gnu build.
* sysdeps/unix/sysv/linux/s390/kernel_sigaction.h: Use Linux generic
kernel_sigction definition.
IA64 kernel_sigaction.h definition is the sama as the Linux generic
one.
Checked on ia64-linux-gnu.
* sysdeps/unix/sysv/linux/ia64/kernel_sigaction.h: Remove file.
HPPA kernel_sigaction.h definition is the sama as the Linux generic
one and old_kernel_sigaction is not used.
Checked on hppa-linux-gnu.
* sysdeps/unix/sysv/linux/hppa/kernel_sigaction.h: Remove file.
Alpha rt_sigaction syscall uses a slight different kernel ABI than
generic one:
arch/alpha/kernel/signal.c
90 SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
91 struct sigaction __user *, oact,
92 size_t, sigsetsize, void __user *, restorer)
Similar as sparc, the syscall expects a restorer function. However
different than sparc, alpha defines the restorer as the 5th argument
(sparc defines as the 4th).
This patch removes the arch-specific alpha sigaction implementation,
adapt the Linux generic one to different restore placements (through
STUB macro), and make alpha use the Linux generic kernel_sigaction
definition.
Checked on alpha-linux-gnu and x86_64-linux-gnu (for sanity).
* sysdeps/unix/sysv/linux/alpha/Makefile: Update comment about
__syscall_rt_sigaction.
* sysdeps/unix/sysv/linux/alpha/kernel_sigaction.h
(kernel_sigaction): Use Linux generic defintion.
(STUB): Define.
(__syscall_rt_sigreturn, __syscall_sigreturn): Add prototype.
* sysdeps/unix/sysv/linux/alpha/rt_sigaction.S
(__syscall_rt_sigaction): Remove implementation.
(__syscall_sigreturn, __syscall_rt_sigreturn): Define as global and
hidden.
* sysdeps/unix/sysv/linux/alpha/sigaction.c: Remove file.
* sysdeps/unix/sysv/linux/alpha/sysdep.h (INLINE_SYSCALL,
INTERNAL_SYSCALL): Remove definitions.
* sysdeps/unix/sysv/linux/sigaction.c: Define STUB to accept both the
action and signal set size.
* sysdeps/unix/sysv/linux/sparc/sparc32/sigaction.c (STUB): Redefine.
* sysdeps/unix/sysv/linux/sparc/sparc64/sigaction.c (STUB): Likewise.
Commit b4a5d26d88 (linux: Consolidate sigaction implementation) added
a wrong kernel_sigaction definition for m68k, meant for __NR_sigaction
instead of __NR_rt_sigaction as used on generic Linux sigaction
implementation. This patch fixes it by using the Linux generic
definition meant for the RT kernel ABI.
Checked the signal tests on emulated m68-linux-gnu (Aranym). It fixes
the faulty signal/tst-sigaction and man works as expected.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
James Clarke <jrtc27@jrtc27.com>
[BZ #23960]
* sysdeps/unix/sysv/linux/kernel_sigaction.h (HAS_SA_RESTORER):
Define if SA_RESTORER is defined.
(kernel_sigaction): Define sa_restorer if HAS_SA_RESTORER is defined.
(SET_SA_RESTORER, RESET_SA_RESTORER): Define iff the macro are not
already defined.
* sysdeps/unix/sysv/linux/m68k/kernel_sigaction.h (SA_RESTORER,
kernel_sigaction, SET_SA_RESTORER, RESET_SA_RESTORER): Remove
definitions.
(HAS_SA_RESTORER): Define.
* sysdeps/unix/sysv/linux/sparc/kernel_sigaction.h (SA_RESTORER,
SET_SA_RESTORER, RESET_SA_RESTORER): Remove definition.
(HAS_SA_RESTORER): Define.
* sysdeps/unix/sysv/linux/nios2/kernel_sigaction.h: Include generic
kernel_sigaction after define SET_SA_RESTORER and RESET_SA_RESTORER.
* sysdeps/unix/sysv/linux/powerpc/kernel_sigaction.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigaction.c: Likewise.
kernel-features.h has a macro __ASSUME_ST_INO_64_BIT, with a comment
"However, SH is lame, and still does not have a 64-bit inode field.".
The macro is, in fact, defined to 0 by Alpha as well as SH. The Alpha
case is, however, trivially useless: none of the files that test
__ASSUME_ST_INO_64_BIT are built for Alpha (which gained kernel
support for stat64 syscalls, with a 64-bit st_ino field, in Linux
2.6.4; the define to 0 for Alpha in glibc predates that).
The SH kernel gained support for a 64-bit st_ino in struct stat64 in
commit 760bcb1deec13c50e20399c84cb6a8ea41cc2820 ("sh: Fix fstatat64()
syscall."), which is in Linux 2.6.22 and later. So the redefinition
of __ASSUME_ST_INO_64_BIT to 0 is of no use for SH either; three of
the files testing it do so immediately after a stat64-family syscall
has been used, which will always have set the 64-bit st_ino correctly
(in addition to the 32-bit __st_ino), while the relevant code
__xstat32_conv executes only after such a syscall in the function
calling __xstat32_conv.
Thus this patch removes __ASSUME_ST_INO_64_BIT and code testing it.
Removing the useless [!__ASSUME_ST_INO_64_BIT] code in __xstat32_conv
renders the [_HAVE_STAT64___ST_INO] and [!_HAVE_STAT64___ST_INO] cases
around it identical, so that conditional is also removed.
Tested compilation with build-many-glibcs.py for its Alpha and SH
configurations; also ran the glibc testsuite for x86_64 and x86.
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_ST_INO_64_BIT): Remove macro definition.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_ST_INO_64_BIT): Do not undefine and define.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_ST_INO_64_BIT): Likewise.
* sysdeps/unix/sysv/linux/fxstat64.c: Do not include
<kernel-features.h>.
(___fxstat64) [_HAVE_STAT64___ST_INO && !__ASSUME_ST_INO_64_BIT]:
Remove conditional code.
* sysdeps/unix/sysv/linux/lxstat64.c: Do not include
<kernel-features.h>.
(___lxstat64) [_HAVE_STAT64___ST_INO && !__ASSUME_ST_INO_64_BIT]:
Remove conditional code.
* sysdeps/unix/sysv/linux/xstat64.c: Do not include
<kernel-features.h>.
(___xstat64) [_HAVE_STAT64___ST_INO && !__ASSUME_ST_INO_64_BIT]:
Remove conditional code.
* sysdeps/unix/sysv/linux/xstatconv.c: Do not include
<kernel-features.h>.
(__xstat32_conv) [_HAVE_STAT64___ST_INO]: Remove conditional code.
[!_HAVE_STAT64___ST_INO]: Make code unconditional.
The ifunc macros s390_vx_libc* are no longer used and
can be removed as all users are now relying on
s390_libc_ifunc_expr.
The same applies to s390_libc_ifunc. The macro
s390_libc_ifunc_init is now renamed to
s390_libc_ifunc_expr_stfle_init and the users are
adjusted accordingly.
ChangeLog:
* sysdeps/s390/multiarch/ifunc-resolve.h
(s390_vx_libc_ifunc, s390_vx_libc_ifunc_redirected,
s390_vx_libc_ifunc2, s390_vx_libc_ifunc_init,
s390_vx_libc_ifunc2_redirected, s390_libc_ifunc):
Delete macro definition.
(s390_libc_ifunc_init): Rename to
s390_libc_ifunc_expr_stfle_init.
* sysdeps/s390/bzero: Use
s390_libc_ifunc_expr_stfle_init instead of
s390_libc_ifunc_init.
* sysdeps/s390/memcmp.c: Likewise.
* sysdeps/s390/memcpy.c: Likewise.
* sysdeps/s390/mempcpy.c: Likewise.
* sysdeps/s390/memset.c: Likewise.
The ifunc handling for various __gconv_transform_* functions
which are using IFUNC on s390x are adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Instead those functions are just an alias to the vector variants.
Furthermore the ifunc-macro s390_libc_ifunc_expr is now used instead of
s390_vx_libc_ifunc.
ChangeLog:
* sysdeps/s390/multiarch/gconv_simple.c (ICONV_VX_IFUNC):
Define macro dependent on HAVE_S390_MIN_Z13_ZARCH_ASM_SUPPORT.
The ifunc handling for wmemcmp is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wmemcmp variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wmemcmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wmemcmp.
* sysdeps/s390/multiarch/wmemcmp-c.c: Move to ...
* sysdeps/s390/wmemcmp-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wmemcmp-vx.S: Move to ...
* sysdeps/s390/wmemcmp-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wmemcmp.c: Move to ...
* sysdeps/s390/wmemcmp.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wmemcmp.h: New file.
The ifunc handling for wmemset is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
Glibc internal calls will use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wmemset variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wmemset variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wmemset.
* sysdeps/s390/multiarch/wmemset-c.c: Move to ...
* sysdeps/s390/wmemset-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wmemset-vx.S: Move to ...
* sysdeps/s390/wmemset-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wmemset.c: Move to ...
* sysdeps/s390/wmemset.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wmemset.h: New file.
The ifunc handling for wmemchr is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
Glibc internal calls will use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wmemchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wmemchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wmemchr.
* sysdeps/s390/multiarch/wmemchr-c.c: Move to ...
* sysdeps/s390/wmemchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wmemchr-vx.S: Move to ...
* sysdeps/s390/wmemchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wmemchr.c: Move to ...
* sysdeps/s390/wmemchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wmemchr.h: New file.
The ifunc handling for wcscspn is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcscspn variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcscspn variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcscspn.
* sysdeps/s390/multiarch/wcscspn-c.c: Move to ...
* sysdeps/s390/wcscspn-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscspn-vx.S: Move to ...
* sysdeps/s390/wcscspn-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscspn.c: Move to ...
* sysdeps/s390/wcscspn.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcscspn.h: New file.
The ifunc handling for wcspbrk is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
Glibc internal calls will use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcspbrk variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcspbrk variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcspbrk.
* sysdeps/s390/multiarch/wcspbrk-c.c: Move to ...
* sysdeps/s390/wcspbrk-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcspbrk-vx.S: Move to ...
* sysdeps/s390/wcspbrk-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcspbrk.c: Move to ...
* sysdeps/s390/wcspbrk.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcspbrk.h: New file.
The ifunc handling for wcsspn is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
Glibc internal calls will use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcsspn variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcsspn variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcsspn.
* sysdeps/s390/multiarch/wcsspn-c.c: Move to ...
* sysdeps/s390/wcsspn-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsspn-vx.S: Move to ...
* sysdeps/s390/wcsspn-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsspn.c: Move to ...
* sysdeps/s390/wcsspn.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcsspn.h: New file.
The ifunc handling for wcsrchr is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcsrchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcsrchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcsrchr.
* sysdeps/s390/multiarch/wcsrchr-c.c: Move to ...
* sysdeps/s390/wcsrchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsrchr-vx.S: Move to ...
* sysdeps/s390/wcsrchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsrchr.c: Move to ...
* sysdeps/s390/wcsrchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcsrchr.h: New file.
The ifunc handling for wcschrnul is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcschrnul variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcschrnul variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcschrnul.
* sysdeps/s390/multiarch/wcschrnul-c.c: Move to ...
* sysdeps/s390/wcschrnul-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcschrnul-vx.S: Move to ...
* sysdeps/s390/wcschrnul-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcschrnul.c: Move to ...
* sysdeps/s390/wcschrnul.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcschrnul.h: New file.
The ifunc handling for wcschr is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
Glibc internal calls will use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcschr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcschr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcschr.
* sysdeps/s390/multiarch/wcschr-c.c: Move to ...
* sysdeps/s390/wcschr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcschr-vx.S: Move to ...
* sysdeps/s390/wcschr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcschr.c: Move to ...
* sysdeps/s390/wcschr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcschr.h: New file.
The ifunc handling for wcsncmp is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcsncmp variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcsncmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcsncmp.
* sysdeps/s390/multiarch/wcsncmp-c.c: Move to ...
* sysdeps/s390/wcsncmp-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsncmp-vx.S: Move to ...
* sysdeps/s390/wcsncmp-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsncmp.c: Move to ...
* sysdeps/s390/wcsncmp.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcsncmp.h: New file.
The ifunc handling for wcscmp is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcscmp variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcscmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcscmp.
* sysdeps/s390/multiarch/wcscmp-c.c: Move to ...
* sysdeps/s390/wcscmp-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscmp-vx.S: Move to ...
* sysdeps/s390/wcscmp-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscmp.c: Move to ...
* sysdeps/s390/wcscmp.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcscmp.h: New file.
The ifunc handling for wcsncat is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcsncat variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcsncat variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcsncat.
* sysdeps/s390/multiarch/wcsncat-c.c: Move to ...
* sysdeps/s390/wcsncat-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsncat-vx.S: Move to ...
* sysdeps/s390/wcsncat-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsncat.c: Move to ...
* sysdeps/s390/wcsncat.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcsncat.h: New file.
The ifunc handling for wcscat is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcscat variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcscat variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcscat.
* sysdeps/s390/multiarch/wcscat-c.c: Move to ...
* sysdeps/s390/wcscat-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscat-vx.S: Move to ...
* sysdeps/s390/wcscat-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscat.c: Move to ...
* sysdeps/s390/wcscat.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcscat.h: New file.
The ifunc handling for wcpncpy is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcpncpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcpncpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcpncpy.
* sysdeps/s390/multiarch/wcpncpy-c.c: Move to ...
* sysdeps/s390/wcpncpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcpncpy-vx.S: Move to ...
* sysdeps/s390/wcpncpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcpncpy.c: Move to ...
* sysdeps/s390/wcpncpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcpncpy.h: New file.
The ifunc handling for wcsncpy is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcsncpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcsncpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcsncpy.
* sysdeps/s390/multiarch/wcsncpy-c.c: Move to ...
* sysdeps/s390/wcsncpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsncpy-vx.S: Move to ...
* sysdeps/s390/wcsncpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsncpy.c: Move to ...
* sysdeps/s390/wcsncpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcsncpy.h: New file.
The ifunc handling for wcpcpy is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcpcpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcpcpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcpcpy.
* sysdeps/s390/multiarch/wcpcpy-c.c: Move to ...
* sysdeps/s390/wcpcpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcpcpy-vx.S: Move to ...
* sysdeps/s390/wcpcpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcpcpy.c: Move to ...
* sysdeps/s390/wcpcpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcpcpy.h: New file.
The ifunc handling for wcscpy is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcscpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcscpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcscpy.
* sysdeps/s390/multiarch/wcscpy-c.c: Move to ...
* sysdeps/s390/wcscpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscpy-vx.S: Move to ...
* sysdeps/s390/wcscpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcscpy.c: Move to ...
* sysdeps/s390/wcscpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcscpy.h: New file.
The ifunc handling for wcsnlen is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
Glibc internal calls will use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcsnlen variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcsnlen variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcsnlen.
* sysdeps/s390/multiarch/wcsnlen-c.c: Move to ...
* sysdeps/s390/wcsnlen-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsnlen-vx.S: Move to ...
* sysdeps/s390/wcsnlen-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcsnlen.c: Move to ...
* sysdeps/s390/wcsnlen.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcsnlen.h: New file.
The ifunc handling for wcslen is adjusted in order to omit ifunc
if the minimum architecture level already supports newer CPUs by default.
Unfortunately the c ifunc variant can't be omitted at all as it is used
by the z13 ifunc variant as fallback if the pointers are not 4-byte aligned.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove wcslen variants.
* sysdeps/s390/Makefile (sysdep_routines): Add wcslen variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for wcslen.
* sysdeps/s390/multiarch/wcslen-c.c: Move to ...
* sysdeps/s390/wcslen-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcslen-vx.S: Move to ...
* sysdeps/s390/wcslen-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/wcslen.c: Move to ...
* sysdeps/s390/wcslen.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-wcslen.h: New file.
The ifunc handling for memrchr is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove memrchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add memrchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for memrchr.
* sysdeps/s390/multiarch/memrchr-c.c: Move to ...
* sysdeps/s390/memrchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/memrchr-vx.S: Move to ...
* sysdeps/s390/memrchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/memrchr.c: Move to ...
* sysdeps/s390/memrchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-memrchr.h: New file.
The ifunc handling for memccpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove memccpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add memccpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for memccpy.
* sysdeps/s390/multiarch/memccpy-c.c: Move to ...
* sysdeps/s390/memccpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/memccpy-vx.S: Move to ...
* sysdeps/s390/memccpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/memccpy.c: Move to ...
* sysdeps/s390/memccpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-memccpy.h: New file.
The ifunc handling for rawmemchr is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove rawmemchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add rawmemchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for rawmemchr.
* sysdeps/s390/multiarch/rawmemchr-c.c: Move to ...
* sysdeps/s390/rawmemchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/rawmemchr-vx.S: Move to ...
* sysdeps/s390/rawmemchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/rawmemchr.c: Move to ...
* sysdeps/s390/rawmemchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-rawmemchr.h: New file.
The ifunc handling for memchr is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
Note: The fallback s390-32/s390-64 ifunc variants with srst instruction
are now moved to the unified memchr-z900.S file which can be used for
31/64bit. The s390-32/s390-64 files multiarch/memchr.c and memchr.S
are deleted.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove memchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add memchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for memchr.
* sysdeps/s390/multiarch/memchr-vx.S: Move to ...
* sysdeps/s390/memchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/memchr.c: Move to ...
* sysdeps/s390/memchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-memchr.h: New file.
* sysdeps/s390/s390-64/memchr.S: Move to ...
* sysdeps/s390/memchr-z900.S: ... here and adjust to be usable
for 31/64bit and ifunc handling.
* sysdeps/s390/s390-32/multiarch/memchr.c: Delete file.
* sysdeps/s390/s390-64/multiarch/memchr.c: Likewise.
* sysdeps/s390/s390-32/memchr.S: Likewise.
The ifunc handling for strcspn is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strcspn variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strcspn variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strcspn.
* sysdeps/s390/multiarch/strcspn-c.c: Move to ...
* sysdeps/s390/strcspn-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcspn-vx.S: Move to ...
* sysdeps/s390/strcspn-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcspn.c: Move to ...
* sysdeps/s390/strcspn.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strcspn.h: New file.
The ifunc handling for strpbrk is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strpbrk variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strpbrk variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strpbrk.
* sysdeps/s390/multiarch/strpbrk-c.c: Move to ...
* sysdeps/s390/strpbrk-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strpbrk-vx.S: Move to ...
* sysdeps/s390/strpbrk-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strpbrk.c: Move to ...
* sysdeps/s390/strpbrk.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strpbrk.h: New file.
The ifunc handling for strspn is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strspn variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strspn variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strspn.
* sysdeps/s390/multiarch/strspn-c.c: Move to ...
* sysdeps/s390/strspn-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strspn-vx.S: Move to ...
* sysdeps/s390/strspn-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strspn.c: Move to ...
* sysdeps/s390/strspn.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strspn.h: New file.
The ifunc handling for strrchr is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strrchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strrchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strrchr.
* sysdeps/s390/multiarch/strrchr-c.c: Move to ...
* sysdeps/s390/strrchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strrchr-vx.S: Move to ...
* sysdeps/s390/strrchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strrchr.c: Move to ...
* sysdeps/s390/strrchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strrchr.h: New file.
The ifunc handling for strchrnul is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strchrnul variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strchrnul variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strchrnul.
* sysdeps/s390/multiarch/strchrnul-c.c: Move to ...
* sysdeps/s390/strchrnul-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strchrnul-vx.S: Move to ...
* sysdeps/s390/strchrnul-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strchrnul.c: Move to ...
* sysdeps/s390/strchrnul.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strchrnul.h: New file.
The ifunc handling for strchr is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strchr variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strchr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strchr.
* sysdeps/s390/multiarch/strchr-c.c: Move to ...
* sysdeps/s390/strchr-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strchr-vx.S: Move to ...
* sysdeps/s390/strchr-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strchr.c: Move to ...
* sysdeps/s390/strchr.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strchr.h: New file.
The ifunc handling for strncmp is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strncmp variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strncmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strncmp.
* sysdeps/s390/multiarch/strncmp-c.c: Move to ...
* sysdeps/s390/strncmp-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncmp-vx.S: Move to ...
* sysdeps/s390/strncmp-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncmp.c: Move to ...
* sysdeps/s390/strncmp.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strncmp.h: New file.
The ifunc handling for strcmp is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
Note: The fallback s390-32/s390-64 ifunc variants with clst instruction
are now moved to the unified strcmp-z900.S file which can be used for
31/64bit. The s390-32/s390-64 files multiarch/strcmp.c and strcmp.S
are deleted.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strcmp variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strcmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strcmp.
* sysdeps/s390/multiarch/strcmp-vx.S: Move to ...
* sysdeps/s390/strcmp-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcmp.c: Move to ...
* sysdeps/s390/strcmp.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strcmp.h: New file.
* sysdeps/s390/s390-64/strcmp.S: Move to ...
* sysdeps/s390/strcmp-z900.S: ... here and adjust to be usable
for 31/64bit and ifunc handling.
* sysdeps/s390/s390-32/multiarch/strcmp.c: Delete file.
* sysdeps/s390/s390-64/multiarch/strcmp.c: Likewise.
* sysdeps/s390/s390-32/strcmp.S: Likewise.
The ifunc handling for strncat is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strncat variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strncat variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strncat.
* sysdeps/s390/multiarch/strncat-c.c: Move to ...
* sysdeps/s390/strncat-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncat-vx.S: Move to ...
* sysdeps/s390/strncat-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncat.c: Move to ...
* sysdeps/s390/strncat.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strncat.h: New file.
The ifunc handling for strcat is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strcat variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strcat variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strcat.
* sysdeps/s390/multiarch/strcat-c.c: Move to ...
* sysdeps/s390/strcat-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcat-vx.S: Move to ...
* sysdeps/s390/strcat-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcat.c: Move to ...
* sysdeps/s390/strcat.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strcat.h: New file.
The ifunc handling for stpncpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove stpncpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add stpncpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for stpncpy.
* sysdeps/s390/multiarch/stpncpy-c.c: Move to ...
* sysdeps/s390/stpncpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/stpncpy-vx.S: Move to ...
* sysdeps/s390/stpncpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/stpncpy.c: Move to ...
* sysdeps/s390/stpncpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-stpncpy.h: New file.
The ifunc handling for strncpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
Note: The fallback s390-32/s390-64 ifunc variants are now moved to
the strncpy-z900.S files. The s390-32/s390-64 files multiarch/strncpy.c
and strncpy.S are deleted.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strncpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strncpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strncpy.
* sysdeps/s390/multiarch/strncpy-vx.S: Move to ...
* sysdeps/s390/strncpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strncpy.c: Move to ...
* sysdeps/s390/strncpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strncpy.h: New file.
* sysdeps/s390/s390-64/strncpy.S: Move to ...
* sysdeps/s390/s390-64/strncpy-z900.S: ... here
and adjust ifunc handling.
* sysdeps/s390/s390-32/strncpy.S: Move to ...
* sysdeps/s390/s390-32/strncpy-z900.S: ... here
and adjust ifunc handling.
* sysdeps/s390/s390-32/multiarch/strncpy.c: Delete file.
* sysdeps/s390/s390-64/multiarch/strncpy.c: Likewise.
The ifunc handling for stpcpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove stpcpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add stpcpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for stpcpy.
* sysdeps/s390/multiarch/stpcpy-c.c: Move to ...
* sysdeps/s390/stpcpy-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/stpcpy-vx.S: Move to ...
* sysdeps/s390/stpcpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/stpcpy.c: Move to ...
* sysdeps/s390/stpcpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-stpcpy.h: New file.
The ifunc handling for strcpy is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
Note: The fallback s390-32/s390-64 ifunc variants with mvst instruction
are now moved to the unified strcpy-z900.S file which can be used for
31/64bit. The s390-32/s390-64 files multiarch/strcpy.c and strcpy.S
are deleted.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strcpy variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strcpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strcpy.
* sysdeps/s390/multiarch/strcpy-vx.S: Move to ...
* sysdeps/s390/strcpy-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strcpy.c: Move to ...
* sysdeps/s390/strcpy.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strcpy.h: New file.
* sysdeps/s390/s390-64/strcpy.S: Move to ...
* sysdeps/s390/strcpy-z900.S: ... here and adjust to be usable
for 31/64bit and ifunc handling.
* sysdeps/s390/s390-32/multiarch/strcpy.c: Delete file.
* sysdeps/s390/s390-64/multiarch/strcpy.c: Likewise.
* sysdeps/s390/s390-32/strcpy.S: Likewise.
The ifunc handling for strnlen is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strnlen variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strnlen variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strnlen.
* sysdeps/s390/multiarch/strnlen-c.c: Move to ...
* sysdeps/s390/strnlen-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strnlen-vx.S: Move to ...
* sysdeps/s390/strnlen-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strnlen.c: Move to ...
* sysdeps/s390/strnlen.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strnlen.h: New file.
The ifunc handling for strlen is adjusted in order to omit ifunc
variants if those will never be used as the minimum architecture level
already supports newer CPUs by default.
Glibc internal calls will then also use the "newer" ifunc variant.
ChangeLog:
* sysdeps/s390/multiarch/Makefile
(sysdep_routines): Remove strlen variants.
* sysdeps/s390/Makefile (sysdep_routines): Add strlen variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Refactor ifunc handling for strlen.
* sysdeps/s390/multiarch/strlen-c.c: Move to ...
* sysdeps/s390/strlen-c.c: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strlen-vx.S: Move to ...
* sysdeps/s390/strlen-vx.S: ... here and adjust ifunc handling.
* sysdeps/s390/multiarch/strlen.c: Move to ...
* sysdeps/s390/strlen.c: ... here and adjust ifunc handling.
* sysdeps/s390/ifunc-strlen.h: New file.
The new vector variant of memmem is using the common code
implementation, but instead of calling the default
mem* functions, the vector variants are called.
ChangeLog:
* sysdeps/s390/Makefile (sysdep_routines): Add memmem variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc variants for memmem.
* sysdeps/s390/ifunc-memmem.h: New file.
* sysdeps/s390/memmem.c: Likewise.
* sysdeps/s390/memmem-c.c: Likewise.
* sysdeps/s390/memmem-vx.c: Likewise.
The new vector variant of strstr is using the common code
implementation, but instead of calling the default
str* / mem* functions, the vector variants are called.
ChangeLog:
* sysdeps/s390/Makefile (sysdep_routines): Add strstr variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc variants for strstr.
* sysdeps/s390/ifunc-strstr.h: New file.
* sysdeps/s390/strstr.c: Likewise.
* sysdeps/s390/strstr-c.c: Likewise.
* sysdeps/s390/strstr-vx.c: Likewise.
This patch introduces a z13 specific ifunc variant for memmove.
As the common code implementation, it checks if we can copy from
the beginning to the end - with z196 memcpy implementation - or
if we have to copy from the end to the beginning.
The latter case is done by using vector load/store instructions.
If vector instructions are not available, the common-code is
used as fallback. Therefore it is implemented in memmove-c with
a different name.
Furthermore the ifunc logic decides if we need the common-code
implementation at all. If vector instructions are supported
due to the minimum architecture level set we can skip the
common-code ifunc variant.
ChangeLog:
* sysdeps/s390/Makefile (sysdep_routines): Add memmove-c.
* sysdeps/s390/ifunc-memcpy.h (HAVE_MEMMOVE_IFUNC,
HAVE_MEMMOVE_IFUNC_AND_VX_SUPPORT, MEMMOVE_DEFAULT,
HAVE_MEMMOVE_C, MEMMOVE_C, HAVE_MEMMOVE_Z13, MEMMOVE_Z13):
New defines.
* sysdeps/s390/memcpy-z900.S: Add z13 memmove implementation.
* sysdeps/s390/memmove-c.c: New file.
* sysdeps/s390/memmove.c: Likewise.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add ifunc variants for memmove.
Add a configure check for z13 in the same way as done for z196.
ChangeLog:
* config.h.in (HAVE_S390_MIN_Z13_ZARCH_ASM_SUPPORT): New undefine.
* sysdeps/s390/configure.ac: Add check for z13 support.
* sysdeps/s390/configure: Regenerated.
The s390/s390x memcpy implementations are safe to be
used by memmove. Starting with this commit, memmove is
using memcpy for the forward cases on s390.
ChangeLog:
* sysdeps/s390/memcopy.h: New file.
Nowadays gcc is automatically replacing a call to bcopy
with a call to memmove. Thus only old binaries will call
the s390 specific bcopy implementation.
The s390 specific implementation is using an own
implementation for memcpy in the forward case and is
relying on memmove in the backward case.
After removing the s390 specific bcopy, the common code
bcopy is used. It just performs a tail call to memmove.
ChangeLog:
* sysdeps/s390/s390-32/bcopy.S: Remove.
* sysdeps/s390/s390-64/bcopy.S: Likewise.
This patch moves all ifunc variants for memcpy/mempcpy
to sysdeps/s390/memcpy-z900.S. The configure-check/preprocessor logic
in sysdeps/s390/ifunc-memcpy.h decides if ifunc is needed at all
and which ifunc variants should be available.
E.g. if the compiler/assembler already supports z196 by default,
the older ifunc variants are not included.
If we only need the newest ifunc variant,
then we can skip ifunc at all.
Therefore the ifunc-resolvers and __libc_ifunc_impl_list are adjusted
in order to handle only the available ifunc variants.
ChangeLog:
* sysdeps/s390/ifunc-memcpy.h: New File.
* sysdeps/s390/memcpy.S: Move to ...
* sysdeps/s390/memcpy-z900.S ... here.
Move implementations from memcpy-s390x.s to here.
* sysdeps/s390/multiarch/memcpy-s390x.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines):
Remove memcpy/mempcpy variants.
* sysdeps/s390/Makefile (sysdep_routines):
Add memcpy/mempcpy variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Adjust ifunc variants for
memcpy and mempcpy.
* sysdeps/s390/multiarch/memcpy.c: Move ifunc resolver
to ...
* sysdeps/s390/memcpy.c: ... here.
Adjust ifunc variants for memcpy.
* sysdeps/s390/multiarch/mempcpy.c: Move to ...
* sysdeps/s390/mempcpy.c: ... here.
Adjust ifunc variants for mempcpy.
* sysdeps/s390/mempcpy.S: Delete file.
The implementation of memcpy/mempcpy for s390-32 (31bit)
and s390-64 (64bit) is nearly the same.
This patch unifies it for maintability reasons.
__mem[p]cpy_z10 and __mem[p]cpy_z196 differs between 31 and 64bit:
-31bit needs .machinemode "zarch_nohighgprs" and llgfr %r4,%r4
-lr vs lgr; lgr can be also used on 31bit as this ifunc variant
is only called if we are on a zarch machine.
__mem[p]cpy_default differs between 31 and 64bit:
-Some 31bit vs 64bit instructions (e.g. ltr vs ltgr.
Solved with 31/64 specific instruction macros).
-The address of mvc instruction is setup in different ways
(larl vs bras). Solved with #if defined __s390x__.
__memcpy_mvcle differs between 31 and 64bit:
-lr vs lgr; ahi vs aghi;
Solved with 31/64bit specific instruction macros.
Otherwise 31/64bit implementation has the same structure of the code.
ChangeLog:
* sysdeps/s390/s390-64/memcpy.S: Move to ...
* sysdeps/s390/memcpy.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/memcpy.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add memcpy.
* sysdeps/s390/s390-32/multiarch/Makefile: Delete file.
* sysdeps/s390/s390-64/multiarch/Makefile: Likewise.
* sysdeps/s390/s390-64/multiarch/memcpy-s390x.S: Move to ...
* sysdeps/s390/multiarch/memcpy-s390x.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/multiarch/memcpy-s390.S: Delete File.
* sysdeps/s390/s390-64/multiarch/memcpy.c: Move to ...
* sysdeps/s390/multiarch/memcpy.c: ... here.
* sysdeps/s390/s390-32/multiarch/memcpy.c: Delete File.
This patch moves all ifunc variants for memcmp
to sysdeps/s390/memcmp-z900.S. The configure-check/preprocessor logic
in sysdeps/s390/ifunc-memcmp.h decides if ifunc is needed at all
and which ifunc variants should be available.
E.g. if the compiler/assembler already supports z196 by default,
the older ifunc variants are not included.
If we only need the newest ifunc variant,
then we can skip ifunc at all.
Therefore the ifunc-resolvers and __libc_ifunc_impl_list are adjusted
in order to handle only the available ifunc variants.
ChangeLog:
* sysdeps/s390/ifunc-memcmp.h: New File.
* sysdeps/s390/memcmp.S: Move to ...
* sysdeps/s390/memcmp-z900.S ... here.
Move implementations from memcmp-s390x.s to here.
* sysdeps/s390/multiarch/memcmp-s390x.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines):
Remove memcmp variants.
* sysdeps/s390/Makefile (sysdep_routines):
Add memcmp variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Adjust ifunc variants for
memcmp.
* sysdeps/s390/multiarch/memcmp.c: Move ifunc resolver
to ...
* sysdeps/s390/memcmp.c: ... here.
Adjust ifunc variants for memcmp.
The implementation of memcmp for s390-32 (31bit) and
s390-64 (64bit) is nearly the same.
This patch unifies it for maintability reasons.
__memcmp_z10 and __memcmp_z196 differs between 31 and 64bit:
-31bit needs .machinemode "zarch_nohighgprs" and llgfr %r4,%r4
-lr vs lgr and some other instructions:
But lgr and co can be also used on 31bit as this ifunc variant
is only called if we are on a zarch machine.
__memcmp_default differs between 31 and 64bit:
-Some 31bit vs 64bit instructions (e.g. ltr vs ltgr.
Solved with 31/64 specific instruction macros).
-The address of mvc instruction is setup in different ways
(larl vs bras). Solved with #if defined __s390x__.
Otherwise 31/64bit implementation has the same structure of the code.
ChangeLog:
* sysdeps/s390/s390-64/memcmp.S: Move to ...
* sysdeps/s390/memcmp.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/memcmp.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add memcmp.
* sysdeps/s390/s390-32/multiarch/Makefile (sysdep_routines):
Remove memcmp.
* sysdeps/s390/s390-64/multiarch/Makefile: Likewise.
* sysdeps/s390/s390-64/multiarch/memcmp-s390x.S: Move to ...
* sysdeps/s390/multiarch/memcmp-s390x.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/multiarch/memcmp-s390.S: Delete File.
* sysdeps/s390/s390-64/multiarch/memcmp.c: Move to ...
* sysdeps/s390/multiarch/memcmp.c: ... here.
* sysdeps/s390/s390-32/multiarch/memcmp.c: Delete File.
This patch moves all ifunc variants for memset
to sysdeps/s390/memset-z900.S. The configure-check/preprocessor logic
in sysdeps/s390/ifunc-memset.h decides if ifunc is needed at all
and which ifunc variants should be available.
E.g. if the compiler/assembler already supports z196 by default,
the older ifunc variants are not included.
If we only need the newest ifunc variant,
then we can skip ifunc at all.
Therefore the ifunc-resolvers and __libc_ifunc_impl_list are adjusted
in order to handle only the available ifunc variants.
ChangeLog:
* sysdeps/s390/ifunc-memset.h: New File.
* sysdeps/s390/memset.S: Move to ...
* sysdeps/s390/memset-z900.S ... here.
Move implementations from memset-s390x.s to here.
* sysdeps/s390/multiarch/memset-s390x.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines):
Remove memset variants.
* sysdeps/s390/Makefile (sysdep_routines):
Add memset variants.
* sysdeps/s390/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Adjust ifunc variants for
memset.
* sysdeps/s390/multiarch/memset.c: Move ifunc resolver
to ...
* sysdeps/s390/memset.c: ... here.
Adjust ifunc variants for memset.
The implementation of memset for s390-32 (31bit) and
s390-64 (64bit) is nearly the same.
This patch unifies it for maintability reasons.
__memset_z10 and __memset_z196 differs between 31 and 64bit:
-31bit needs .machinemode "zarch_nohighgprs" and llgfr %r4,%r4
-lr vs lgr and some other instructions:
But lgr and co can be also used on 31bit as this ifunc variant
is only called if we are on a zarch machine.
__memset_default differs between 31 and 64bit:
-Some 31bit vs 64bit instructions (e.g. ltr vs ltgr.
Solved with 31/64 specific instruction macros).
-The address of mvc instruction is setup in different ways
(larl vs bras). Solved with #if defined __s390x__.
Otherwise 31/64bit implementation has the same structure of the code.
ChangeLog:
* sysdeps/s390/s390-64/memset.S: Move to ...
* sysdeps/s390/memset.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/memset.S: Delete File.
* sysdeps/s390/multiarch/Makefile (sysdep_routines): Add memset.
* sysdeps/s390/s390-32/multiarch/Makefile (sysdep_routines):
Remove memset.
* sysdeps/s390/s390-64/multiarch/Makefile: Likewise.
* sysdeps/s390/s390-64/multiarch/memset-s390x.S: Move to ...
* sysdeps/s390/multiarch/memset-s390x.S: ... here.
Adjust to be usable for 31/64bit.
* sysdeps/s390/s390-32/multiarch/memset-s390.S: Delete File.
* sysdeps/s390/s390-64/multiarch/memset.c: Move to ...
* sysdeps/s390/multiarch/memset.c: ... here.
* sysdeps/s390/s390-32/multiarch/memset.c: Delete File.
The renaming of hwcap arguments in ifunc-resolvers is needed
in order to prepare for further commits which refactors
ifunc handling for memset, memcmp, and memcpy. Now you are able
to use s390_libc_ifunc_init which stores the stfle bits
within the expression for an ifunc-resolver generated by
s390_libc_ifunc_expr.
ChangeLog:
* sysdeps/s390/multiarch/ifunc-resolve.h
(s390_libc_ifunc_init, s390_libc_ifunc,
s390_vx_libc_ifunc2_redirected): Use hwcap instead of dl_hwcap.
Add a configure check for z10 in the same way as done for z196.
ChangeLog:
* config.h.in (HAVE_S390_MIN_Z10_ZARCH_ASM_SUPPORT): New undefine.
* sysdeps/s390/configure.ac: Add check for z10 support.
* sysdeps/s390/configure: Regenerated.
Merge i386 and x86_64 atomic-machine.h to x86 atomic-machine.h.
Tested on i686 and x86_64 as well as with build-many-glibcs.py.
* sysdeps/i386/atomic-machine.h: Merged with ...
* sysdeps/x86_64/atomic-machine.h: To ...
* sysdeps/x86/atomic-machine.h: This. New file.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__localtime64): Add.
* manual/maint.texi: Document Y2038 symbol handling.
* time/localtime.c
(__localtime64): Add.
[__TIMERSIZE != 64] (__localtime): Turn into a wrapper.
GCC mainline now gives errors for an asm that clobbers the stack
pointer. According to
<https://gcc.gnu.org/ml/gcc-patches/2018-12/msg00932.html> GCC
previously ignored such a clobber; thus, this patch removes it from
the clobbers for ia64 syscalls.
Tested with build-many-glibcs.py for ia64-linux-gnu.
* sysdeps/unix/sysv/linux/ia64/sysdep.h (ASM_CLOBBERS_6_COMMON):
Do not clobber r12.
Continuing the process of building up and using Python infrastructure
for extracting and using values in headers, this patch adds a test
that MAP_* constants from sys/mman.h agree with those in the Linux
kernel headers. (Other sys/mman.h constants could be added to the
test separately.)
This set of constants has grown over time, so the generic code is
enhanced to allow saying extra constants are OK on either side of the
comparison (where the caller sets those parameters based on the Linux
kernel headers version, compared with the version the headers were
last updated from). Although the test is a custom Python file, my
intention is to move in future to a single Python script for such
tests and text files it takes as inputs, once there are enough
examples to provide a guide to the common cases in such tests (I'd
like to end up with most or all such sets of constants copied from
kernel headers having such tests, and likewise for structure layouts
from the kernel).
The Makefile code is essentially the same as for tst-signal-numbers,
but I didn't try to find an object file to depend on to represent the
dependency on the headers used by the test (the conform/ tests don't
try to represent such header dependencies at all, for example).
Tested with build-many-glibcs.py, and also for x86_64 with older
kernel headers.
* scripts/glibcextract.py (compare_macro_consts): Take parameters
to allow extra macros from first or second sources.
* sysdeps/unix/sysv/linux/tst-mman-consts.py: New file.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc]
(tests-special): Add $(objpfx)tst-mman-consts.out.
($(objpfx)tst-mman-consts.out): New makefile target.
Linux kernel have remove stat64 family from default syscall set, new
implementations with statx is needed when __ARCH_WANT_STAT64 is not
define. This patch add conditionals for relevant functions, using statx
system call to get information and then copy to the return buf, ref to
include/linux/fs.h from linux kernel.
* sysdeps/unix/sysv/linux/Makefile: Add statx_cp.c.
* sysdeps/unix/sysv/linux/fxstat64.c: Add conditionals for kernel
without stat64 system call support.
* sysdeps/unix/sysv/linux/fxstatat64.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstat.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat64.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/xstat.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/xstat64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/statx_cp.c: New file.
* sysdeps/unix/sysv/linux/statx_cp.c: Likewise.
* sysdeps/unix/sysv/linux/statx_cp.h: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/statx_cp.c: Likewise.
[BZ #18040]
Problem reported by Saito Takaaki <tails.saito@gmail.com> in
https://debbugs.gnu.org/32592
Call stack get_subexp->get_subexp_sub->clean_state_log_if_needed may
call extend_buffers which reallocates the re_string_t internal buffer.
Local variable 'buf' was not updated in such case, resulting in
use-after-free.
* posix/regexec.c (get_subexp): Update 'buf' after call to
get_subexp_sub.
Continuing the removal of bits/mathinline.h inlines that would better
be done by the compiler, this patch removes x86 inlines for asinh,
acosh and atanh functions (only for fast-math, non-SSE 32-bit x86).
I've filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88502> for
adding such inlines as an optimization in GCC.
Tested for x86_64 and x86.
* sysdeps/x86/fpu/bits/mathinline.h (asinh): Remove inline
definition.
(acosh): Likewise.
(atanh): Likewise.
The test case misc/tst-efgcvt.c only tests the double variants of the
Old-fashioned System V number-to-string functions: ecvt, fcvt, and their
re-entrant counterparts. With a few macros, the code can be reused for
the long double versions of these functions. A future patch will reuse
it again for IEEE long double on powerpc64le.
Tested for powerpc and powerpc64le.
Sometimes tst-nss-test3 fails with:
error: test-container.c:386: unable to open .../nss/libnss_test1.so for reading
The test tst-nss-test3 which runs in a container needs
libnss_test[12].so. (see e.g. tst-nss-test3.script).
Before this test was moved from tests to tests-container variable,
the requirement was met. Thus this patch adds this requirement
also for tests in tests-container.
ChangeLog:
* nss/Makefile (tst-nss-test3.out): New rule.
GCC mainline now gives errors for an asm that clobbers the stack
pointer. According to
<https://gcc.gnu.org/ml/gcc-patches/2018-12/msg00932.html> GCC
previously ignored such a clobber; thus, this patch removes it from
_hurd_stack_setup.
Tested with build-many-glibcs.py for i686-gnu.
* sysdeps/mach/hurd/i386/init-first.c (_hurd_stack_setup): Do not
clobber sp.
This patch fix Hygon Dhyana processor CPU Vendor ID detection
problem in glibc sysdep module, current glibc codes doesn't
recognize Dhyana CPU Vendor ID("HygonGenuine") and set kind to
arch_kind_other, which result to incorrect zero value for
__cache_sysconf() syscall. As Hygon Dhyana share most
architecture feature as AMD Family 17h, this patch add Hygon CPU
Vendor ID check and setup kind to arch_kind_amd and reuse AMD
code path, which lead to correct return value in
__cache_sysconf() syscall. we run the glibc test suite for both
Hygon Dhyana and AMD EPYC and found no failure case.
Background:
Chengdu Haiguang IC Design Co., Ltd (Hygon) is a Joint Venture
between AMD and Haiguang Information Technology Co.,Ltd., aims at
providing high performance x86 processor for China server market.
Its first generation processor codename is Dhyana, which
originates from AMD technology and shares most of the
architecture with AMD's family 17h, but with different CPU Vendor
ID("HygonGenuine")/Family series number(Family 18h).
Related Hygon kernel patch can be found on
http://lkml.kernel.org/r/5ce86123a7b9dad925ac583d88d2f921040e859b.1538583282.git.puwen@hygon.cn
Signed-off-by: fanjinke <fanjinke@hygon.cn>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
In the read lock function (__pthread_rwlock_rdlock_full) there was a
code path which would fail to reload __readers while waiting for
PTHREAD_RWLOCK_RWAITING to change. This failure to reload __readers
into a local value meant that various conditionals used the old value
of __readers and with only two threads left it could result in an
indefinite stall of one of the readers (waiting for PTHREAD_RWLOCK_RWAITING
to go to zero, but it never would).
Continuing the removal of bits/mathinline.h inlines that would better
be done by the compiler, this patch removes an x86 inline for hypot
functions (only for fast-math, only for non-SSE 32-bit x86). I've
filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88474> for adding
such an inline as an optimization in GCC.
Tested for x86_64 and x86.
* sysdeps/x86/fpu/bits/mathinline.h (hypot): Remove inline
definition.
Non-consumable data, alias data not related to benchmarks, should be sent to
the standard error, thus pipelines can work as expected.
* benchtests/scripts/compare_bench.py (do_compare): write to stderr in case
stat is not present.
* benchtests/scripts/compare_bench.py (plot_graphs): write to stderr in case
timings field is not present. Also string showing the output filename goes
into the stderr.
Allows user to pick a statistic, defaulting to min and mean, from command
line. At the same time, if stat does not exit, catch the run-time exception
and keep comparing the rest of benchmarked functions. Finally, take care of
division-by-zero exceptions and as the latter, keep comparing the rest of the
functions, turning the script a bit more fault tolerant thus useful.
* benchtests/scripts/compare_bench.py (do_compare): Catch KeyError and
ZeroDivisorError exceptions.
* benchtests/scripts/compare_bench.py (compare_runs): Use stats argument to
loop through user provided statistics.
* benchtests/scripts/compare_bench.py (main): Include the --stats argument.
Allows other functions to be processed, making the script a bit more fault
tolerant thus useful.
* benchtests/scripts/compare_bench.py (compare_runs): Continue instead of return.
The “any later version” clause was missing. This change was approved
in principle by the FSF in RT ticket #1316403.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add CFI information about the offset of registers stored in the stack
frame.
[BZ #23614]
* sysdeps/powerpc/powerpc64/addmul_1.S (FUNC): Add CFI offset for
registers saved in the stack frame.
* sysdeps/powerpc/powerpc64/lshift.S (__mpn_lshift): Likewise.
* sysdeps/powerpc/powerpc64/mul_1.S (__mpn_mul_1): Likewise.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
On some platforms, long double may have either the same format as double
or another, wider format, such as the Quadruple IEC 60559 long double
format or the IBM Extended Precision format (both 128-bits wide).
Selecting between the available formats is done by using one of the
following compiler switches: -mlong-double-128, for the wider format, or
-mlong-double-64, for the narrower. On all platforms that provide this
choice, the wider format is the default.
When the non-default format is selected by user code (i.e.: when
building with -mlong-double-64) calls to functions that take long double
parameters or return a long double type (e.g.: strfroml) are redirected
to a compat function, via assembler redirection, by headers such as
bits/stdlib-ldbl.h or bits/misc-ldbl.h.
In glibc builds, however, these headers are currently being read from
the system directories (/usr/include/bits) rather than from the source
directory. Although this works correctly today, it raises
reproducibility concerns. Besides that, builds for powerpc64le will
need these files from the source directory, because on powerpc64le, the
new redirections for long double with IEEE binary128 format will be
implemented in these headers.
Tested for powerpc64 and powerpc64le.
Since the commit
commit 698fb75b9f
Author: Zack Weinberg <zackw@panix.com>
Date: Wed Mar 7 14:32:01 2018 -0500
Add __v*printf_internal with flags arguments
_IO_vfprintf is gone. This did not trigger any test case failures on
powerpc and powerpc64le, because there were no tests that covered it.
However, new test cases for nldbl versions of argp.h functions exposed
the problem.
Tested for powerpc64 and powerpc64le.
The threshold value at which powf overflows depends on the rounding mode
and the current check did not take this into account. So when the result
was rounded away from zero it could become infinity without setting
errno to ERANGE.
Example: pow(0x1.7ac7cp+5, 23) is 0x1.fffffep+127 + 0.1633ulp
If the result goes above 0x1.fffffep+127 + 0.5ulp then errno is set,
which is fine in nearest rounding mode, but
powf(0x1.7ac7cp+5, 23) is inf in upward rounding mode
powf(-0x1.7ac7cp+5, 23) is -inf in downward rounding mode
and the previous implementation did not set errno in these cases.
The fix tries to avoid affecting the common code path or calling a
function that may introduce a stack frame, so float arithmetics is used
to check the rounding mode and the threshold is selected accordingly.
[BZ #23961]
* math/auto-libm-test-in: Add new test case.
* math/auto-libm-test-out-pow: Regenerated.
* sysdeps/ieee754/flt-32/e_powf.c (__powf): Fix overflow check.
During postclean.req testing it was found that the fork in the
parent process (after the unshare syscall) would fail with ENOMEM
(see recursive_remove() in test-container.c). While failing with
ENOMEM is certainly unexpected, it is simply easier to refactor
the design and have the parent remain outside of the namespace.
This change moves the postclean.req processing to a distinct
process (the parent) that then forks the test process (which will
have to fork once more to complete uid/gid transitions). When the
test process exists the cleanup process will ensure all files are
deleted when a post clean is requested.
Signed-off-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
[BZ #23948]
* support/test-container.c: Move postclean step to before we
change namespaces.
This patch eliminates the gen-py-const.awk variant of gen-as-const,
switching to use of gnu-as-const.py (with a new --python option) to
process .pysym files (i.e., to generate nptl_lock_constants.py), as
the syntax of those files is identical to that of .sym files.
Note that the generated nptl_lock_constants.py is *not* identical to
the version generated by the awk script. Apart from the trivial
changes (comment referencing the new script, and output being sorted),
the constant FUTEX_WAITERS, PTHREAD_MUTEXATTR_FLAG_BITS,
PTHREAD_MUTEXATTR_FLAG_PSHARED and PTHREAD_MUTEX_PRIO_CEILING_MASK are
now output as positive rather than negative constants (on x86_64
anyway; maybe not necessarily on 32-bit systems):
< FUTEX_WAITERS = -2147483648
---
> FUTEX_WAITERS = 2147483648
< PTHREAD_MUTEXATTR_FLAG_BITS = -251662336
< PTHREAD_MUTEXATTR_FLAG_PSHARED = -2147483648
---
> PTHREAD_MUTEXATTR_FLAG_BITS = 4043304960
> PTHREAD_MUTEXATTR_FLAG_PSHARED = 2147483648
< PTHREAD_MUTEX_PRIO_CEILING_MASK = -524288
---
> PTHREAD_MUTEX_PRIO_CEILING_MASK = 4294443008
This is because gen-as-const has a cast of the constant value to long
int, which gen-py-const lacks.
I think the positive values are more logically correct, since the
constants in question are in fact unsigned in C. But to reliably
produce gen-as-const.py output for constants that always (in C and
Python) reflects the signedness of values with the high bit of "long
int" set would mean more complicated logic needs to be used in
computing values.
The more correct positive values by themselves produce a failure of
nptl/test-mutexattr-printers, because masking with
~PTHREAD_MUTEXATTR_FLAG_BITS & ~PTHREAD_MUTEX_NO_ELISION_NP now leaves
a bit -1 << 32 in the Python value, resulting in a KeyError exception.
To avoid that, places masking with ~ of one of the constants in
question are changed to mask with 0xffffffff as well (this reflects
how ~ in Python applies to an infinite-precision integer whereas ~ in
C does not do any promotions beyond the width of int).
Tested for x86_64.
* scripts/gen-as-const.py (main): Handle --python option.
* scripts/gen-py-const.awk: Remove.
* Makerules (py-const-script): Use gen-as-const.py.
($(py-const)): Likewise.
* nptl/nptl-printers.py (MutexPrinter.read_status_no_robust): Mask
with 0xffffffff together with ~(PTHREAD_MUTEX_PRIO_CEILING_MASK).
(MutexAttributesPrinter.read_values): Mask with 0xffffffff
together with ~PTHREAD_MUTEXATTR_FLAG_BITS and
~PTHREAD_MUTEX_NO_ELISION_NP.
* manual/README.pretty-printers: Update reference to
gen-py-const.awk.
This patch converts the tst-signal-numbers test from shell + awk to
Python.
As with gen-as-const, the point is not so much that shell and awk are
problematic for this code, as that it's useful to build up general
infrastructure in Python for use of a range of code involving
extracting values from C headers. This patch moves some code from
gen-as-const.py to a new glibcextract.py, which also gains functions
relating to listing macros, and comparing the values of a set of
macros from compiling two different pieces of code.
It's not just signal numbers that should have such tests; pretty much
any case where glibc copies constants from Linux kernel headers should
have such tests that the values and sets of constants agree except
where differences are known to be OK. Much the same also applies to
structure layouts (although testing those without hardcoding lists of
fields to test will be more complicated).
Given this patch, another test for a set of macros would essentially
be just a call to glibcextract.compare_macro_consts (plus boilerplate
code - and we could move to having separate text files defining such
tests, like the .sym inputs to gen-as-const, so that only a single
Python script is needed for most such tests). Some such tests would
of course need new features, e.g. where the set of macros changes in
new kernel versions (so you need to allow new macro names on the
kernel side if the kernel headers are newer than the version known to
glibc, and extra macros on the glibc side if the kernel headers are
older). tst-syscall-list.sh could become a Python script that uses
common code to generate lists of macros but does other things with its
own custom logic.
There are a few differences from the existing shell + awk test.
Because the new test evaluates constants using the compiler, no
special handling is needed any more for one signal name being defined
to another. Because asm/signal.h now needs to pass through the
compiler, not just the preprocessor, stddef.h is included as well
(given the asm/signal.h issue that it requires an externally provided
definition of size_t). The previous code defined __ASSEMBLER__ with
asm/signal.h; this is removed (__ASSEMBLY__, a different macro,
eliminates the requirement for stddef.h on some but not all
architectures).
Tested for x86_64, and with build-many-glibcs.py.
* scripts/glibcextract.py: New file.
* scripts/gen-as-const.py: Do not import os.path, re, subprocess
or tempfile. Import glibcexctract.
(compute_c_consts): Remove. Moved to glibcextract.py.
(gen_test): Update reference to compute_c_consts.
(main): Likewise.
* sysdeps/unix/sysv/linux/tst-signal-numbers.py: New file.
* sysdeps/unix/sysv/linux/tst-signal-numbers.sh: Remove.
* sysdeps/unix/sysv/linux/Makefile
($(objpfx)tst-signal-numbers.out): Use tst-signal-numbers.py.
Redirect stderr as well as stdout.
I have tested that this builds and the resulting program still work.
This was tested on gcc23.fsffrance.org, and for some reason the vdso
there seems unused even when using shared libraries.
[BZ #19767]
* sysdeps/unix/sysv/linux/mips/init-first.c: Remove #ifdef SHARED.
* sysdeps/unix/sysv/linux/mips/libc-vdso.h: Remove #ifdef SHARED.
* sysdeps/unix/sysv/linux/mips/mips32/sysdep.h: Define
ALWAYS_USE_VSYSCALL.
* sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h: Define
ALWAYS_USE_VSYSCALL.
* sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h: Define
ALWAYS_USE_VSYSCALL.
This patch updates files coming from tzcode to the versions in tzcode
2018g. No changes elsewhere in glibc were needed.
Tested for x86_64.
* timezone/private.h: Update from tzcode 2018g.
* timezone/tzfile.h: Likewise.
* timezone/tzselect.ksh: Likewise.
* timezone/zdump.c: Likewise.
* timezone/zic.c: Likewise.
This one tests for BZ#23907 where the double free
test didn't check the tcache bin bounds before dereferencing
the bin.
[BZ #23907]
* malloc/tst-tcfree3.c: New.
* malloc/Makefile: Add it.
We can't use "__typeof__ (getcpu)" since getcpu is Linux specific and
Hurd doesn't have it.
Tested with build-many-glibcs.py.
* include/sched.h (__getcpu): Don't use __typeof__ (getcpu).
On powerpc64le, long double can currently take two formats: the same as
double (-mlong-double-64) or IBM Extended Precision (default with
-mlong-double-128 or explicitly with -mabi=ibmlongdouble). The internal
implementation of scanf-like functions is aware of these possibilites
and, based on the format in use, properly calls __strtold_internal or
__strtod_internal, saving the return to a variable of type double or
long double.
When library support for TS 18661-3 was added to glibc, a new function,
__strtof128_internal, was added to enable reading of floating-point
values with IEEE binary128 format into the _Float128 type. Now that
powerpc64le is getting support for its third long double format, and
taking into account that this format is the same as the format of
_Float128, this patch extends __vfscanf_internal and __vfwscanf_internal
to call __strtof128_internal or __wcstof128_internal when appropriate.
The result gets saved into a variable of _Float128 type.
Tested for powerpc64le.
Along with posix_spawn_file_actions_addchdir,
posix_spawn_file_actions_addfchdir is the subject of a change proposal
for POSIX: <http://austingroupbugs.net/view.php?id=1208>
This patch updates various miscellaneous files from their upstream
sources.
Tested for x86_64, including "make pdf".
* manual/texinfo.tex: Update to version 2018-09-21.20 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2018-11-28.
* scripts/config.sub: Update to version 2018-11-28.
* scripts/install-sh: Update to version 2018-03-11.20.
* scripts/mkinstalldirs: Update to version 2018-03-07.03.
* scripts/move-if-change: Update to version 2018-03-07 03:47.
After all that prep work, nldbl-compat.c can now use PRINTF_LDBL_IS_DBL
instead of __no_long_double to control the behavior of printf-like
functions; this is the last thing we needed __no_long_double for, so it
can go away entirely.
Tested for powerpc and powerpc64le.
The _chk variants of all of the printf functions become much simpler.
This is the last thing that we needed _IO_acquire_lock_clear_flags2
for, so it can go as well. I took the opportunity to make the headers
included and the names of all local variables consistent across all the
affected files.
Since we ultimately want to get rid of __no_long_double as well, it
must be possible to get all of the nontrivial effects of the _chk
functions by calling the _internal functions with appropriate flags.
For most of the __(v)xprintf_chk functions, this is covered by
PRINTF_FORTIFY plus some up-front argument checks that can be
duplicated. However, __(v)sprintf_chk installs a custom jump table so
that it can crash instead of overflowing the output buffer. This
functionality is moved to __vsprintf_internal, which now has a
'maxlen' argument like __vsnprintf_internal; to get the unsafe
behavior of ordinary (v)sprintf, pass -1 for that argument.
obstack_printf_chk and obstack_vprintf_chk are no longer in the same
file.
As a side-effect of the unification of both fortified and non-fortified
vdprintf initialization, this patch fixes bug 11319 for __dprintf_chk
and __vdprintf_chk, which was previously fixed only for dprintf and
vdprintf by the commit
commit 7ca890b88e
Author: Ulrich Drepper <drepper@redhat.com>
Date: Wed Feb 24 16:07:57 2010 -0800
Fix reporting of I/O errors in *dprintf functions.
This patch adds a test case to avoid regressions.
Tested for powerpc and powerpc64le.
__nldbl___vsyslog_chk will ultimately want to pass PRINTF_LDBL_IS_DBL
down to __vfprintf_internal *as well as* possibly setting PRINTF_FORTIFY.
To make that possible, we need a __vsyslog_internal that takes the
same flags as printf. The code in misc/syslog.c does also get a
little simpler.
Tested for powerpc and powerpc64le.
There are a lot more printf variants than there are scanf variants,
and the code for setting up and tearing down their custom FILE
variants around the call to __vf(w)printf is more complicated and
variable. Therefore, I have added _internal versions of all the
v*printf variants, rather than introducing helper routines so that
they can all directly call __vf(w)printf_internal, as was done with
scanf.
As with the scanf changes, in this patch the _internal functions still
look at the environmental mode bits and all callers pass 0 for the
flags parameter.
Several of the affected public functions had _IO_ name aliases that
were not exported (but, in one case, appeared in libio.h anyway);
I was originally planning to leave them as aliases to avoid having
to touch internal callers, but it turns out ldbl_*_alias only work
for exported symbols, so they've all been removed instead. It also
turns out there were hardly any internal callers. _IO_vsprintf and
_IO_vfprintf *are* exported, so those two stick around.
Summary for the changes to each of the affected symbols:
_IO_vfprintf, _IO_vsprintf:
All internal calls removed, thus the internal declarations, as well
as uses of libc_hidden_proto and libc_hidden_def, were also removed.
The external symbol is now exposed via uses of ldbl_strong_alias
to __vfprintf_internal and __vsprintf_internal, respectively.
_IO_vasprintf, _IO_vdprintf, _IO_vsnprintf,
_IO_vfwprintf, _IO_vswprintf,
_IO_obstack_vprintf, _IO_obstack_printf:
All internal calls removed, thus declaration in internal headers
were also removed. They were never exported, so there are no
aliases tying them to the internal functions. I.e.: entirely gone.
__vsnprintf:
Internal calls were always preceded by macros such as
#define __vsnprintf _IO_vsnprintf, and
#define __vsnprintf vsnprintf
The macros were removed and their uses replaced with calls to the
new internal function __vsnprintf_internal. Since there were no
internal calls, the internal declaration was also removed. The
external symbol is preserved with ldbl_weak_alias to ___vsnprintf.
__vfwprintf:
All internal calls converted into calls to __vfwprintf_internal,
thus the internal declaration was removed. The function is now a
wrapper that calls __vfwprintf_internal. The external symbol is
preserved.
__vswprintf:
Similarly, but no external symbol.
__vasprintf, __vdprintf, __vfprintf, __vsprintf:
New internal wrappers. Not exported.
vasprintf, vdprintf, vfprintf, vsprintf, vsnprintf,
vfwprintf, vswprintf,
obstack_vprintf, obstack_printf:
These functions used to be aliases to the respective _IO_* function,
they are now aliases to their respective __* functions.
Tested for powerpc and powerpc64le.
Change the callers of __vfscanf_internal and __vfwscanf_internal that
want to treat 'long double' as another name for 'double' (all of which
happen to be in sysdeps/ieee754/ldbl-opt/nldbl-compat.c) to communicate
this via the new flags argument, instead of the per-thread variable
__no_long_double and its __ldbl_is_dbl wrapper macro.
Tested for powerpc and powerpc64le.
Change the callers of __vfscanf_internal and __vfwscanf_internal that
want C99-compliant behavior to communicate this via the new flags
argument, rather than setting bits on the FILE object. This also
means these functions do not need to do their own locking.
Tested for powerpc and powerpc64le.
There are two flags currently defined: SCANF_LDBL_IS_DBL is the mode
used by __nldbl_ scanf variants, and SCANF_ISOC99_A is the mode used
by __isoc99_ scanf variants. In this patch, the new functions honor
these flag bits if they're set, but they still also look at the
corresponding bits of environmental state, and callers all pass zero.
The new functions do *not* have the "errp" argument possessed by
_IO_vfscanf and _IO_vfwscanf. All internal callers passed NULL for
that argument. External callers could theoretically exist, so I
preserved wrappers, but they are flagged as compat symbols and they
don't preserve the three-way distinction among types of errors that
was formerly exposed. These functions probably should have been in
the list of deprecated _IO_ symbols in 2.27 NEWS -- they're not just
aliases for vfscanf and vfwscanf.
(It was necessary to introduce ldbl_compat_symbol for _IO_vfscanf.
Please check that part of the patch very carefully, I am still not
confident I understand all of the details of ldbl-opt.)
This patch also introduces helper inlines in libio/strfile.h that
encapsulate the process of initializing an _IO_strfile object for
reading. This allows us to call __vfscanf_internal directly from
sscanf, and __vfwscanf_internal directly from swscanf, without
duplicating the initialization code. (Previously, they called their
v-counterparts, but that won't work if we want to control *both* C99
mode and ldbl-is-dbl mode using the flags argument to__vfscanf_internal.)
It's still a little awkward, especially for wide strfiles, but it's
much better than what we had.
Tested for powerpc and powerpc64le.
Now that __time64_t exists, we can switch internal function
__tz_convert from 32-bit to 64-bit time. This involves switching
some other internal functions as well, namely __tz_compute and
__offtime.
Tested with 'make check' on x86_64-linux-gnu and i686-linux.gnu.
* include/time.h
(__tz_compute): Replace time_t with __time64_t.
(__tz_convert): Replace time_t* with __time64_t.
(__offtime): Replace time_t* with __time64_t.
* time/gmtime.c
(__gmtime_r): Adjust call to __tz_convert.
(gmtime): Likewise.
* time/localtime.c
(__localtime_r): Likewise.
(localtime): Likewise.
* time/offtime.c: Replace time_t with __time64_t.
* time/tzset.c: Likewise.
I noticed that, now that build-many-glibcs.py no longer copies glibc
sources, I was getting core dumps in my glibc source directories. The
cause appears to be, from the i686-gnu build:
for dso in ` env LD_TRACE_LOADED_OBJECTS=1 \
/scratch/jmyers/glibc-bot/build/glibcs/i686-gnu/glibc/elf/ld.so.1 \
/scratch/jmyers/glibc-bot/build/glibcs/i686-gnu/glibc/testroot.pristine/bin/sh \
[...]
Segmentation fault (core dumped)
In this case, the x86 architecture means the binary executes, but
dumps core rather than actually working.
Anything involving running the newly built glibc should only be done
ifeq ($(run-built-tests),yes). This patch conditions the relevant
part of the testroot setup accordingly.
Tested for x86_64, and with build-many-glibcs.py for i686-gnu.
* Makefile ($(objpfx)testroot.pristine/install.stamp): Do not run
dynamic linker unless [$(run-built-tests) = yes].
It was reported in
<https://sourceware.org/ml/libc-alpha/2018-12/msg00045.html> that
gen-as-const.py fails to generate test code in the case where a .sym
file has no symbols in it, so resulting in a test failing to link for
Hurd.
The relevant difference from the old awk script is that the old script
treated '--' lines as indicating that the text to do at the start of
the test (or file used to compute constants) should be output at that
point if not already output, as well as treating lines with actual
entries for constants like that. This patch changes gen-as-const.py
accordingly, making it the sole responsibility of the code parsing
.sym files to determine when such text should be output and ensuring
it's always output at some point even if there are no symbols and no
'--' lines, since not outputting it means the test fails to link.
Handling '--' like that also avoids any problems that would arise if
the first entry for a symbol were inside #ifdef (since the text in
question must not be output inside #ifdef).
Tested for x86_64, and with build-many-glibcs.py for i686-gnu. Note
that there are still compilation test failures for i686-gnu
(linknamespace tests, possibly arising from recent posix_spawn-related
changes).
* scripts/gen-as-const.py (compute_c_consts): Take an argument
'START' to indicate that start text should be output.
(gen_test): Likewise.
(main): Generate 'START' for first symbol or '--' line, or at end
of input if not previously generated.
I have tested that this builds and the resulting program still work.
The kernel in gcc117 (which I ussed for testing) seems to be missing
https://patchwork.kernel.org/patch/10060431/, so the vdso is never used.
[BZ #19767]
* sysdeps/unix/sysv/linux/arm/init-first.c: Remove #ifdef SHARED.
* sysdeps/unix/sysv/linux/arm/libc-vdso.h: Remove #ifdef SHARED.
* sysdeps/unix/sysv/linux/arm/sysdep.h: Define
ALWAYS_USE_VSYSCALL.
This patch is essentially 28669f86f6 adjusted for the generic
implementation.
Checked on x86_64-linux-gnu with Linux spawni.c removed. The only
failure is posix/tst-spawn3, which is expected.
[BZ #23913]
* sysdeps/posix/spawni.c (maybe_script_execute):
Increment size of new_argv by one.
Downstream distributions need consistent sets of hardlinks in
order for rpm to operate effectively. This means that even if
locales are built with a high level of parallelism that the
resulting files need to have consistent hardlink counts. The only
way to achieve this is with a post-install hardlink pass using a
program like 'hardlink' (shipped in Fedora).
If the downstream distro wants to post-process the hardlinks then
the time spent in localedef looking up sibling directories and
processing hardlinks is wasted effort.
To optimize the build and install pass we add a --no-hard-links
option to localedef to avoid doing the hardlink optimziation for
size.
Tested on x86_64 with 'make localedata/install-locale-files'
before and after. Without the patch we have files with 100+
hardlink counts. After the patch and running with --no-hard-links
all link counts are 1. This patch also alters the convenience
target 'make localedata/install-locale-files' to use the new
option.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
Extend CPUID support for all feature bits from CPUID. Add a new macro,
CPU_FEATURE_USABLE, which can be used to check if a feature is usable at
run-time, instead of HAS_CPU_FEATURE and HAS_ARCH_FEATURE.
Add COMMON_CPUID_INDEX_D_ECX_1, COMMON_CPUID_INDEX_80000007 and
COMMON_CPUID_INDEX_80000008 to check CPU feature bits in them.
Tested on i686 and x86-64 as well as using build-many-glibcs.py with
x86 targets.
* sysdeps/x86/cacheinfo.c (intel_check_word): Updated for
cpu_features_basic.
(__cache_sysconf): Likewise.
(init_cacheinfo): Likewise.
* sysdeps/x86/cpu-features.c (get_extended_indeces): Also
populate COMMON_CPUID_INDEX_80000007 and
COMMON_CPUID_INDEX_80000008.
(get_common_indices): Also populate COMMON_CPUID_INDEX_D_ECX_1.
Use CPU_FEATURES_CPU_P (cpu_features, XSAVEC) to check if
XSAVEC is available. Set the bit_arch_XXX_Usable bits.
(init_cpu_features): Use _Static_assert on
index_arch_Fast_Unaligned_Load.
__get_cpuid_registers and __get_arch_feature. Updated for
cpu_features_basic. Set stepping in cpu_features.
* sysdeps/x86/cpu-features.h: (FEATURE_INDEX_1): Changed to enum.
(FEATURE_INDEX_2): New.
(FEATURE_INDEX_MAX): Changed to enum.
(COMMON_CPUID_INDEX_D_ECX_1): New.
(COMMON_CPUID_INDEX_80000007): Likewise.
(COMMON_CPUID_INDEX_80000008): Likewise.
(cpuid_registers): Likewise.
(cpu_features_basic): Likewise.
(CPU_FEATURE_USABLE): Likewise.
(bit_arch_XXX_Usable): Likewise.
(cpu_features): Use cpuid_registers and cpu_features_basic.
(bit_arch_XXX): Reweritten.
(bit_cpu_XXX): Likewise.
(index_cpu_XXX): Likewise.
(reg_XXX): Likewise.
* sysdeps/x86/tst-get-cpu-features.c: Include <stdio.h> and
<support/check.h>.
(CHECK_CPU_FEATURE): New.
(CHECK_CPU_FEATURE_USABLE): Likewise.
(cpu_kinds): Likewise.
(do_test): Print vendor, family, model and stepping. Check
HAS_CPU_FEATURE and CPU_FEATURE_USABLE.
(TEST_FUNCTION): Removed.
Include <support/test-driver.c> instead of
"../../test-skeleton.c".
* sysdeps/x86_64/multiarch/sched_cpucount.c (__sched_cpucount):
Check POPCNT instead of POPCOUNT.
* sysdeps/x86_64/multiarch/test-multiarch.c (do_test): Likewise.
hurd's jmp_buf-ssp.sym does not define any symbol.
scripts/gen-as-const.py currently was emitting an empty line in that
case, and the gawk invocation was prepending "asconst_" to it, ending up
with:
.../build/glibc/setjmp/test-as-const-jmp_buf-ssp.c:1:2: error: expected « = », « , », « ; », « asm » or
« __attribute__ » at end of input
1 | asconst_
| ^~~~~~~~
* scripts/gen-as-const.py (main): Avoid emitting empty line when
there is no element in `consts'.
Fortunately we were previously only missing an optimization.
Thanks dcb <dcb314@hotmail.com> for the report
[BZ #23032]
* sysdeps/htl/pt-barrier-init.c (pthread_barrier_init): Fix comparing
attr with __pthread_default_barrierattr.
* sysdeps/htl/pt-cond-init.c (__pthread_cond_init): Fix comparing
attr with __pthread_default_condattr.
* sysdeps/htl/pt-mutex-init.c (_pthread_mutex_init): Fix comparing
attr with __pthread_default_mutexattr.
* sysdeps/htl/pt-rwlock-init.c (_pthread_rwlock_init): Fix comparing
attr with __pthread_default_rwlockattr.
This patch does not have any functionality change, we only provide a spin
count tunes for pthread adaptive spin mutex. The tunable
glibc.pthread.mutex_spin_count tunes can be used by system administrator to
squeeze system performance according to different hardware capabilities and
workload characteristics.
The maximum value of spin count is limited to 32767 to avoid the overflow
of mutex->__data.__spins variable with the possible type of short in
pthread_mutex_lock ().
The default value of spin count is set to 100 with the reference to the
previous number of times of spinning via trylock. This value would be
architecture-specific and can be tuned with kinds of benchmarks to fit most
cases in future.
I would extend my appreciation sincerely to H.J.Lu for his help to refine
this patch series.
* manual/tunables.texi (POSIX Thread Tunables): New node.
* nptl/Makefile (libpthread-routines): Add pthread_mutex_conf.
* nptl/nptl-init.c: Include pthread_mutex_conf.h
(__pthread_initialize_minimal_internal) [HAVE_TUNABLES]: Call
__pthread_tunables_init.
* nptl/pthreadP.h (MAX_ADAPTIVE_COUNT): Remove.
(max_adaptive_count): Define.
* nptl/pthread_mutex_conf.c: New file.
* nptl/pthread_mutex_conf.h: New file.
* sysdeps/generic/adaptive_spin_count.h: New file.
* sysdeps/nptl/dl-tunables.list: New file.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Use
max_adaptive_count () not MAX_ADAPTIVE_COUNT.
* nptl/pthread_mutex_timedlock.c (__pthrad_mutex_timedlock):
Likewise.
Suggested-by: Andi Kleen <andi.kleen@intel.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Kemi.wang <kemi.wang@intel.com>
This patch uses posix_spawn on system implementation. On Linux this has
the advantage of much lower memory consumption (usually 32 Kb minimum for
the mmap stack area).
Although POSIX does not require, glibc system implementation aims to be
thread and cancellation safe. The cancellation code is moved to generic
implementation and enabled iff SIGCANCEL is defined (similar on how the
cancellation handler is enabled on nptl-init.c).
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, and powerpc64le-linux-gnu.
* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Use
__sigismember instead of sigismember.
* sysdeps/posix/system.c [SIGCANCEL] (cancel_handler_args,
cancel_handler): New definitions.
(CLEANUP_HANDLER, CLEANUP_RESET): Likewise.
(DO_LOCK, DO_UNLOCK, INIT_LOCK, ADD_REF, SUB_REF): Remove.
(do_system): Use posix_spawn instead of fork and execl and remove
reentracy code.
* sysdeps/generic/not-errno.h (__kill_noerrno): New prototype.
* sysdeps/unix/sysv/linux/not-errno.h (__kill_noerrno): Likewise.
* sysdeps/unix/sysv/linux/ia64/system.c: Remove file.
* sysdeps/unix/sysv/linux/s390/system.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/system.c: Likewise.
* sysdeps/unix/sysv/linux/system.c: Likewise.
This patch uses posix_spawn on popen instead of fork and execl. On Linux
this has the advantage of much lower memory consumption (usually 32 Kb
minimum for the mmap stack area).
Two issues are also fixed with this change:
* BZ#17490: although POSIX pthread_atfork description only list 'fork'
as the function that should execute the atfork handlers, popen
description states that:
'[...] shall be *as if* a child process were created within the popen()
call using the fork() function [...]'
Other libc/system seems to follow the idea atfork handlers should not be
executed for popen:
libc/system | run atfork handles | notes
------------|----------------------|---------------------------------------
Freebsd | no | uses vfork
Solaris 11 | no |
MacOSX 11 | no | implemented through posix_spawn syscall
------------|----------------------|----------------------------------------
Similar to posix_spawn and system, popen idea is to spawn a different
binary so all the POSIX rationale to run the atfork handlers to avoid
internal process inconsistency is not really required and in some cases
might be unsafe.
* BZ#22834: the described scenario, where the forked process might access
invalid memory due an inconsistent state in multithreaded environment,
should not happen because posix_spawn does not access the affected
data structure (proc_file_chain).
Checked on x86_64-linux-gnu and i686-linux-gnu.
[BZ #22834]
[BZ #17490]
* NEWS: Add new semantic for atfork with popen and system.
* libio/iopopen.c (_IO_new_proc_open): use posix_spawn instead of
fork and execl.
There is a data-dependency between the fields of struct l_reloc_result
and the field used as the initialization guard. Users of the guard
expect writes to the structure to be observable when they also observe
the guard initialized. The solution for this problem is to use an acquire
and release load and store to ensure previous writes to the structure are
observable if the guard is initialized.
The previous implementation used DL_FIXUP_VALUE_ADDR (l_reloc_result->addr)
as the initialization guard, making it impossible for some architectures
to load and store it atomically, i.e. hppa and ia64, due to its larger size.
This commit adds an unsigned int to l_reloc_result to be used as the new
initialization guard of the struct, making it possible to load and store
it atomically in all architectures. The fix ensures that the values
observed in l_reloc_result are consistent and do not lead to crashes.
The algorithm is documented in the code in elf/dl-runtime.c
(_dl_profile_fixup). Not all data races have been eliminated.
Tested with build-many-glibcs and on powerpc, powerpc64, and powerpc64le.
[BZ #23690]
* elf/dl-runtime.c (_dl_profile_fixup): Guarantee memory
modification order when accessing reloc_result->addr.
* include/link.h (reloc_result): Add field init.
* nptl/Makefile (tests): Add tst-audit-threads.
(modules-names): Add tst-audit-threads-mod1 and
tst-audit-threads-mod2.
Add rules to build tst-audit-threads.
* nptl/tst-audit-threads-mod1.c: New file.
* nptl/tst-audit-threads-mod2.c: Likewise.
* nptl/tst-audit-threads.c: Likewise.
* nptl/tst-audit-threads.h: Likewise.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch replaces gen-as-const.awk, and some fragments of the
Makefile code that used it, by a Python script. The point is not such
much that awk is problematic for this particular script, as that I'd
like to build up a general Python infrastructure for extracting
information from C headers, for use in writing tests of such headers.
Thus, although this patch does not set up such infrastructure, the
compute_c_consts function in gen-as-const.py might be moved to a
separate Python module in a subsequent patch as a starting point for
such infrastructure.
The general idea of the code is the same as in the awk version, but no
attempt is made to make the output files textually identical. When
generating a header, a dict of constant names and values is generated
internally then defines are printed in sorted order (rather than the
order in the .sym file, which would have been used before). When
generating a test that the values computed match those from a normal
header inclusion, the test code is made into a compilation test using
_Static_assert, where previously the comparisons were done only when
the test was executed. One fragment of test generation (converting
the previously generated header to use asconst_* prefixes on its macro
names) is still in awk code in the makefiles; only the .sym processing
and subsequent execution of the compiler to extract constants have
moved to the Python script.
Tested for x86_64, and with build-many-glibcs.py.
* scripts/gen-as-const.py: New file.
* scripts/gen-as-const.awk: Remove.
* Makerules ($(common-objpfx)%.h $(common-objpfx)%.h.d): Use
gen-as-const.py.
($(objpfx)test-as-const-%.c): Likewise.
Add support for %x, %lx and %zx to _dl_exception_create_format and pad
to the full width with 0.
* elf/Makefile (tests-internal): Add tst-create_format1.
* elf/dl-exception.c (_dl_exception_create_format): Support
%x, %lx and %zx.
* elf/tst-create_format1.c: New file.
_IO_fwide() is defined in libio.h file. This file is included only
when _LIBC is defined.
So, in case of compilation of these files without _LIBC definition,
the compilation failed due to this unknown function.
Now this function is called when libio.h file is included.
(Change merged from gnulib. Tested on x86_64.)
* argp/argp-fmtstream.c (__argp_fmtstream_update): Use [_LIBC]
conditional on calls to _IO_fwide and putwc_unlocked. (Merge from
gnulib.)
* argp/argp-help.c (__argp_failure): Likewise.
These files were both auto-generated and shipped in the source tree.
We can assume that sed is available and always generate the files
during the build.
Signal zero does not terminate a process, so it is safe to use negative
values for signal numbers.
Adjust libio/tst-vtables-common.c to use this new functionality,
instead of determining the termination status for a signal indirectly.
Now that build-many-glibcs.py touches at checkout time all files that
might get rebuilt in the glibc source directory in a normal glibc
build and test run, this patch stops the script from copying the glibc
source directory, so that all builds use the original directory
directly (and less disk space is used, less I/O is involved and cached
copies of the sources in memory can be shared between all the builds -
as well as avoiding spurious failures from copying while "git gc" is
running). This is similar to how all other components were already
handled. Any bugs involving writing into the source directory can be
dealt with in future as normal bugs, just as such bugs already are
handled.
Tested with build-many-glibcs.py runs with a read-only glibc source
directory, with all files not touched by the script having timestamps
in forwards alphabetical order and separately with all files not
touched by the script having timestamps in backwards alphabetical
order.
* scripts/build-many-glibcs.py (Glibc.build_glibc): Use original
source directory instead of a copy.
(CommandList.create_copy_dir): Remove.
The logic for generating sysdeps/mach/hurd/bits/errno.h involves a
stamp file and $(move-if-change).
The temporary file (generated unconditionally) is generated in the
source directory. This means that even if
sysdeps/mach/hurd/bits/errno.h is up to date, and has an up to date
timestamp, the build will fail if the source directory is read-only.
Even with a writable source directory, multiple concurrent builds for
i686-gnu with the same source directory could race to access the
temporary file (which always has the same name).
This patch uses the build directory for the temporary file instead to
avoid those problems. (In the case where the file is out of date and
the temporary file does need to be moved to the source directory, if
there are multiple concurrent builds for i686-gnu with the same source
directory, and the source and build directories are on different
filesystems, it's possible there might still be races replacing the
file in the source directory, depending on exactly how mv handles such
cross-filesystem moves. This is certainly no worse than the present
situation, where such a case would have races regardless of whether
the file is out of date or whether different filesystems are in use.)
Tested with a build-many-glibcs.py build for i686-gnu.
* sysdeps/mach/hurd/Makefile ($(common-objpfx)stamp-errnos): Use
$(hurd-objpfx)bits/errno.h-tmp, not $(hurd)/bits/errno.h-tmp.
Mathieu Desnoyers ran into an issue with his rseq patch where he
was the first person to add weak thread-local data and this
resulted in an ABI list update with entries like this:
"GLIBC_2.29 w ? D .tdata 0000000000000020".
The weakness of the symbol has nothing to do with the DSOs ABI
and so we should not write anything about weak symbols here. The
.tdata entries should be treated exactly like .tbss entries and
the output should have been: "GLIBC_2.29 __rseq_abi T 0x20"
This change makes abilist.awk handle .tdata just like .tbss,
while at the same time adding an error case for the default, and
the unknown line cases. We never want anyone to be able to add
such entries to any ABI list files and should see an immediate
error and consult with experts.
Tested by Mathieu Desnoyers <mathieu.desnoyers@efficios.com> with
the rseq patch set and 'make update-all-abi'.
Tested myself with 'make update-all-abi' on x86_64 with no
changes.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
build-many-glibcs.py currently copies the source tree to avoid issues
with parallel builds trying to write into it. This copying can result
in occasional spurious build failures from bots, when a "git gc" is in
progress that changes .git contents while copying is taking place, and
it would also be desirable to avoid the need to copy to save on disk
space, I/O and memory used in build-many-glibcs.py builds.
In preparation for removing the copying, this patch arranges for
build-many-glibcs.py to touch more files on checkout so their
timestamps do not result in make attempting to rebuild them. Before
actually removing the copying, I intend to do further tests to ensure
I haven't missed any other such makefile dependencies.
This is of course without prejudice to possibly moving more of these
files to being generated in the build directory rather than being
checked in at all, where that can be done using build tools already
required for the build. For sysdeps files (installed and otherwise)
it would be necessary to make sure this does not affect the search
ordering, for headers used in the build it would be necessary to
ensure they are generated early enough, and for errlist.c there may be
dual licensing reasons for keeping it checked in.
Tested that a checkout with build-many-glibcs.py does touch the
expected files and that a glibcs build for aarch64-linux-gnu succeeds.
* scripts/build-many-glibcs.py (Context.fix_glibc_timestamps):
Touch additional files.
The previous check could read beyond the end of the tcache entry
array. If the e->key == tcache cookie check happened to pass, this
would result in crashes.
All the required code already existed, and some of it was already
running.
AT_SYSINFO_EHDR is processed if NEED_DL_SYSINFO_DSO is defined, but it
looks like it always is. The call to setup_vdso is also unconditional,
so all that was left to do was setup the function pointers and use
them. This patch just deletes some #ifdef to enable that.
[BZ #19767]
* nptl/Makefile (tests-static): Add tst-cond11-static.
(tests): Likewise.
* nptl/tst-cond11-static.c: New File.
* sysdeps/unix/sysv/linux/Makefile (tests-static): Add
tst-affinity-static.
(tests): Likewise.
* sysdeps/unix/sysv/linux/sysdep-vdso.h: Check USE_VSYSCALL
instead of SHARED.
* sysdeps/unix/sysv/linux/sysdep.h (ALWAYS_USE_VSYSCALL): New.
(USE_VSYSCALL): Likewise.
* sysdeps/unix/sysv/linux/tst-affinity-static.c: New file.
* sysdeps/unix/sysv/linux/x86/libc-vdso.h: Check USE_VSYSCALL
instead of SHARED.
* sysdeps/unix/sysv/linux/x86_64/init-first.c: Don't check
SHARED.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h (ALWAYS_USE_VSYSCALL):
New.
The generic kernel-features.h defines __ASSUME_COPY_FILE_RANGE for 4.5
and later kernels. However, for 32-bit Arm binaries running on 64-bit
Arm kernels, the syscall was only wired up in the 4.7 kernel, although
the 32-bit Arm kernel had the syscall from 4.5 onwards. This patch
corrects the Arm kernel-features.h to undefine the macro for
configured minimum kernel versions before 4.7.
Tested (compilation only) with a build-many-glibcs.py build for
arm-linux-gnueabi.
[BZ #23915]
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__LINUX_KERNEL_VERSION < 0x040700] (__ASSUME_COPY_FILE_RANGE):
Undefine.
Add a re-exec test with legacy bitmap to verify that legacy bitmap is
properly hanlded by kernel.
* sysdeps/x86/Makefile (tests): Add tst-cet-legacy-1a.
(tst-cet-legacy-1a-ARGS): New.
($(objpfx)tst-cet-legacy-1a): New target.
* sysdeps/x86/tst-cet-legacy-1a.c: New file.
In <https://sourceware.org/ml/libc-alpha/2018-11/msg00225.html>,
Florian reported that the change from conformtest.pl to conformtest.py
had increased conform/ test time, possibly because of increased
startup overhead for Python scripts.
This patch improves conformtest.py performance by arranging for as
many tests of a (header, standard) pair as possible to use a single
execution of the compiler, so it does not need to initialize and parse
the whole header under test separately for every test assertion.
Specifically, compilation tests that are not marked as "optional" or
"xfail" are combined into a single source file, and are only then run
separately if compilation of that combined file fails. For me, this
reduces the wall clock time for the conformtest.py tests (not the
whole of the conform/ directory) from two minutes to 15 seconds.
Tested for x86_64, and with build-many-glibcs.py.
* conform/conformtest.py (CompileSubTest.__init__): Set
self.run_early to False.
(ExecuteSubTest.__init__): Likewise.
(HeaderTests.run): Try running all non-optional, non-XFAILed
compilation tests in a single execution of the compiler.
This patch continues moving conformtest towards running more tests in
a single compiler execution by separating the generation and execution
of the subtests of each test.
Instead of test classes having a run method that both generates the
text of the programs to be compiled or executed, and compiles or
executes them, they are changed to having a gen_subtests method that
just generates CompileSubTest and ExecuteSubTest objects to store the
subtest names and text, and then a separate loop in HeaderTests.run
deals with actually executing those subtests.
This will allow for future changes to extract the text for all
non-optional, non-xfail compilation subtests to try compiling those
all at once, with separate compilations only if that fails, so
massively reducing the number of separate compiler executions (each of
which needs to parse the entire contents of the header under test, in
addition to the startup cost that applies even for compiling an empty
file).
Tested for x86_64, and with build-many-glibcs.py.
* conform/conformtest.py (CompileSubTest): New class.
(ExecuteSubTest): Likewise.
(ElementTest.run): Rename to gen_subtests. Append tests to
self.subtests instead of running them.
(ConstantTest.run): Likewise.
(SymbolTest.run): Likewise.
(TypeTest.run): Likewise.
(TagTest.run): Likewise.
(FunctionTest.run): Likewise.
(VariableTest.run): Likewise.
(MacroFunctionTest.run): Likewise.
(MacroStrTest.run): Likewise.
(HeaderTests.handle_test_line): Generate subtests for tests.
(HeaderTests.run): Run subtests for tests.
Introduce new pow symbol version that doesn't do SVID compatible error
handling. The standard errno and fp exception based error handling is
inline in the new code and does not have significant overhead.
The wrapper is disabled for sysdeps/ieee754/dbl-64 by using empty
w_pow.c and enabled for targets with their own pow implementation or
ifunc dispatch on __ieee754_pow by including math/w_pow.c.
The compatibility symbol version still uses the wrapper with SVID error
handling around the new code. There is no new symbol version nor
compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
On targets where previously powl was an alias of pow, now it points to
the compatibility symbol with the wrapper, because it still need the
SVID compatible error handling. This affects NO_LONG_DOUBLE (e.g. arm)
and LONG_DOUBLE_COMPAT (e.g. alpha) targets as well.
The __pow_finite symbol is now an alias of pow. Both __pow_finite and
pow set errno and thus not const functions.
The ia64 asm is changed so the compat and new symbol versions map to the
same address.
On x86_64 #include <math.h> was added before macro definitions that
may affect that header.
Tested with build-many-glibcs.py.
* math/Versions (GLIBC_2.29): Add pow.
* math/w_pow_compat.c (__pow_compat): Change to versioned compat
symbol.
* math/w_pow.c: New file.
* sysdeps/i386/fpu/w_pow.c: New file.
* sysdeps/ia64/fpu/e_pow.S: Add versioned symbols.
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Rename to __pow
and add necessary aliases.
* sysdeps/ieee754/dbl-64/w_pow.c: New file.
* sysdeps/m68k/m680x0/fpu/w_pow.c: New file.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Update.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Update.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__ieee754_pow): Rename to
__pow.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__ieee754_pow): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_pow.c (__ieee754_pow): Likewise.
* sysdeps/x86_64/fpu/multiarch/w_pow.c: New file.
Introduce new log2 symbol version that doesn't do SVID compatible error
handling. The standard errno and fp exception based error handling is
inline in the new code and does not have significant overhead.
The wrapper is disabled for sysdeps/ieee754/dbl-64 by using empty
w_log2.c and enabled for targets with their own log2 implementation by
including math/w_log2.c.
The compatibility symbol version still uses the wrapper with SVID error
handling around the new code. There is no new symbol version nor
compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
On targets where previously log2l was an alias of log2, now it points to
the compatibility symbol with the wrapper, because it still need the
SVID compatible error handling. This affects NO_LONG_DOUBLE (e.g. arm)
and LONG_DOUBLE_COMPAT (e.g. alpha) targets as well.
The __log2_finite symbol is now an alias of log2. Both __log2_finite
and log2 set errno and thus not const functions.
The ia64 asm is changed so the compat and new symbol versions map to the
same address.
Tested with build-many-glibcs.py.
* math/Versions (GLIBC_2.29): Add log2.
* math/w_log2_compat.c (__log2_compat): Change to versioned compat
symbol.
* math/w_log2.c: New file.
* sysdeps/i386/fpu/w_log2.c: New file.
* sysdeps/ia64/fpu/e_log2.S: Add versioned symbols.
* sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Rename to __log2
and add necessary aliases.
* sysdeps/ieee754/dbl-64/w_log2.c: New file.
* sysdeps/m68k/m680x0/fpu/w_log2.c: New file.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Update.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Update.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update.
Introduce new log symbol version that doesn't do SVID compatible error
handling. The standard errno and fp exception based error handling is
inline in the new code and does not have significant overhead.
The wrapper is disabled for sysdeps/ieee754/dbl-64 by using empty
w_log.c and enabled for targets with their own log implementation by
including math/w_log.c.
The compatibility symbol version still uses the wrapper with SVID error
handling around the new code. There is no new symbol version nor
compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
On targets where previously logl was an alias of log, now it points to
the compatibility symbol with the wrapper, because it still need the
SVID compatible error handling. This affects NO_LONG_DOUBLE (e.g. arm)
and LONG_DOUBLE_COMPAT (e.g. alpha) targets as well.
The __log_finite symbol is now an alias of log. Both __log_finite and
log set errno and thus not const functions.
The ia64 asm is changed so the compat and new symbol versions map to the
same address.
On x86_64 #include <math.h> was added before macro definitions that may
affect that header.
Tested with build-many-glibcs.py.
* math/Versions (GLIBC_2.29): Add log.
* math/w_log_compat.c (__log_compat): Change to versioned compat
symbol.
* math/w_log.c: New file.
* sysdeps/i386/fpu/w_log.c: New file.
* sysdeps/ia64/fpu/e_log.S: Update.
* sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Rename to __log
and add necessary aliases.
* sysdeps/ieee754/dbl-64/w_log.c: New file.
* sysdeps/m68k/m680x0/fpu/w_log.c: New file.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Update.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Update.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update.
* sysdeps/x86_64/fpu/multiarch/e_log-avx.c (__ieee754_log): Rename to
__log.
* sysdeps/x86_64/fpu/multiarch/e_log-fma.c (__ieee754_log): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_log-fma4.c (__ieee754_log): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_log.c (__ieee754_log): Likewise.
* sysdeps/x86_64/fpu/multiarch/w_log.c: New file.
Introduce new exp and exp2 symbol version that don't do SVID compatible
error handling. The standard errno and fp exception based error handling
is inline in the new code and does not have significant overhead.
The double precision wrappers are disabled for sysdeps/ieee754/dbl-64
by using empty w_exp.c and w_exp2.c files, the math/w_exp.c and
math/w_exp2.c files use the wrapper template and can be included by
targets that have their own exp and exp2 implementations or use ifunc
on the glibc internal __ieee754_exp symbol.
The compatibility symbol versions still use the wrapper with SVID error
handling around the new code. There is no new symbol version nor
compatibility code on !LIBM_SVID_COMPAT targets (e.g. riscv).
On targets where previously expl and exp2l were aliases of exp and exp2,
now they point to the compatibility symbols with the wrapper, because
they still need the SVID compatible error handling. This affects
NO_LONG_DOUBLE (e.g arm) and LONG_DOUBLE_COMPAT (e.g. alpha) targets
as well.
The _finite symbols are now aliases of the standard symbols (they have
no performance advantage anymore). Both the standard symbols and
_finite symbols set errno and thus not const functions.
The ia64 asm is changed so the compat and new symbol versions map to the
same address.
On x86_64 #include <math.h> was added before macro definitions that may
affect that header (the new macro name is __exp instead of __ieee754_exp
which breaks some math.h macros).
Tested with build-many-glibcs.py.
* math/Versions (GLIBC_2.29): Add exp and exp2.
* math/w_exp2_compat.c (__exp2_compat): Change to versioned compat
symbol, handle NO_LONG_DOUBLE and LONG_DOUBLE_COMPAT explicitly.
* math/w_exp_compat.c (__exp_compat): Likewise.
* math/w_exp.c: New file.
* math/w_exp2.c: New file.
* sysdeps/i386/fpu/w_exp.c: New file.
* sysdeps/i386/fpu/w_exp2.c: New file.
* sysdeps/ia64/fpu/e_exp.S: Add versioned symbols.
* sysdeps/ia64/fpu/e_exp2.S: Likewise.
* sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Rename to __exp
and add necessary aliases.
* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Rename to __exp2
and add necessary aliases.
* sysdeps/ieee754/dbl-64/w_exp.c: New file.
* sysdeps/ieee754/dbl-64/w_exp2.c: New file.
* sysdeps/m68k/m680x0/fpu/w_exp.c: New file.
* sysdeps/m68k/m680x0/fpu/w_exp2.c: New file.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Update.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Update.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Update.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Update.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Update.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Update.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Update.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Update.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__exp1): Remove.
(__ieee754_exp): Rename to __exp.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__exp1): Remove.
(__ieee754_exp): Rename to __exp.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__exp1): Remove.
(__ieee754_exp): Rename to __exp.
* sysdeps/x86_64/fpu/multiarch/e_exp.c (__ieee754_exp): Rename to
__exp.
* sysdeps/x86_64/fpu/multiarch/w_exp.c: New file.
This fixes an ineffiency in the non-zero memset. Delaying the writeback
until the end of the loop is slightly faster on some cores - this shows
~5% performance gain on Cortex-A53 when doing large non-zero memsets.
* sysdeps/aarch64/memset.S (MEMSET): Improve non-zero memset loop.
This patch makes tests in conformtest use unique identifiers, in
preparation for trying to cover more tests in a single compilation to
speed up these tests as suggested in
<https://sourceware.org/ml/libc-alpha/2018-11/msg00229.html>.
Tests are assigned a number, used in generating identifiers; where a
single call to a run method does multiple compilations (sharing that
number), identifiers are changed as needed to avoid duplication
between those compilations, so they can be combined in future.
Large numbers of positional arguments to format strings make the code
harder to follow, and using the test numbers serves to increase the
number of arguments to such format strings, so the code is generally
changed to use %(name)s where all the arguments come from attributes
of the test object and so vars(self) is sufficient to provide all
those names for the format string. Cases where some arguments aren't
attributes of self still use positional format arguments.
Tested for x86_64, and with build-many-glibcs.py.
* conform/conformtest.py (ElementTest.run): Use unique identifiers
in tests. Use names for format arguments.
(ConstantTest.run): Likewise.
(SymbolTest.run): Likewise.
(TypeTest.run): Likewise.
(TagTest.run): Likewise.
(FunctionTest.run): Likewise.
(VariableTest.run): Likewise.
(MacroFunctionTest.run): Likewise.
(MacroStrTest.run): Likewise.
(HeaderTests.__init__): Set self.num_tests.
(HeaderTests.handle_test_line): Set test.num. Increment
self.num_tests.
This is sometimes useful to determine if a test truly got stuck, or if
it was making progress (logging information to standard output) and
was merely slow to finish.
On platforms where long double used to have the same format as double,
but later switched to a different format (alpha, s390, sparc, and
powerpc), accessing the older behavior is possible and it happens via
__nldbl_* functions (not on the API, but accessible from header
redirection and from compat symbols). These functions write to the
global flag __ldbl_is_dbl, which tells other functions that long double
variables should be handled as double. This patch takes the first step
towards removing this global flag and creates __vstrfmon_l_internal,
which takes an explicit flags parameter.
This change arguably makes the generated code slightly worse on
architectures where __ldbl_is_dbl is never true; right now, on those
architectures, it's a compile-time constant; after this change, the
compiler could theoretically prove that __vstrfmon_l_internal was
never called with a nonzero flags argument, but it would probably need
LTO to do it. This is not performance critical code and I tend to
think that the maintainability benefits of removing action at a
distance are worth it. However, we _could_ wrap the runtime flag
check with a macro that was defined to ignore its argument and always
return false on architectures where __ldbl_is_dbl is never true, if
people think the codegen benefits are important.
Tested for powerpc and powerpc64le.
The DEBUG_MKTIME code no longer works in glibc or in Gnulib.
And it’s no longer needed now that glibc and Gnulib both have
their own testing mechanisms for mktime.
* time/mktime.c (DEBUG_MKTIME): Remove. All uses removed.
[BZ#23789]
mktime was not properly reporting failures when the underlying
localtime_r fails with errno != EOVERFLOW; it incorrectly treated
them like EOVERFLOW failures, and set errno to EOVERFLOW.
The problem could happen on non-glibc platforms, with Gnulib.
* time/mktime.c (guess_time_tm): Remove, replacing with ...
(tm_diff): ... this simpler function, which does not change errno.
All callers changed to deal with errno themselves.
(ranged_convert, __mktime_internal): Return failure immediately if
the underlying function reports any failure other than EOVERFLOW.
(__mktime_internal): Set errno to EOVERFLOW if the spring-forward
gap code fails.
[BZ#23789]
* time/mktime.c (ranged_convert): On 32-bit platforms, don’t
mishandle a DST transition that jumps over the Y2038 boundary.
No such DST transitions are known so this is only a theoretical
bug, but we might as well do things right.
[BZ#23789]
* time/mktime.c (long_int): Now 4⨯ int, not just 3⨯.
This is so that we can add tm_diff results to a previous guess,
which will be useful in a later patch.
[BZ#23789]
* time/mktime.c [!_LIBC && !DEBUG_MKTIME]:
Include libc-config.h, not config.h, for __set_errno.
(guess_time_tm, __mktime_internal): Set errno to EOVERFLOW on overflow.
* sysdeps/mach/hurd/dl-sysdep.c (check_no_hidden): Use
__attribute_copy__ to copy attributes from name. Drop static qualifier
to avoid warnings about leaf attribute not having effect on static
functions.
This patch fixes the build for MIPS (o32) with GCC 9 by stopping MIPS
__longjmp from using strong_alias, instead defining the alias
manually, so that the intended effect of not copying the nomips16
attribute is achieved, as explained in the included comment.
Tested with build-many-glibcs.py compilers build for mips64-linux-gnu
(which includes glibc builds for all three ABIs).
* sysdeps/mips/__longjmp.c (__longjmp): Define alias manually with
alias attribute, not with strong_alias.
Soft-float powerpc fails to build with current GCC mainline because of
use of libc_hidden_data_def for TLS variables, resulting in a non-TLS
alias being defined, to which the tls_model attribute is now copied,
resulting in a warning about it being ignored.
The problem here appears to be the non-TLS alias. This patch adds a
hidden_tls_def macro family, corresponding to the hidden_tls_proto
macros, to define TLS aliases properly in such a case, and uses it for
those powerpc soft-float variables.
Tested with build-many-glibcs.py compilers build for powerpc-linux-gnu
soft-float. Also tested for x86_64.
* include/libc-symbols.h [SHARED && !NO_HIDDEN && !__ASSEMBLER__]
(__hidden_ver2): New macro. Use old definition of __hidden_ver1
with additional parameter thread.
[SHARED && !NO_HIDDEN && !__ASSEMBLER__] (__hidden_ver1): Define
in terms of __hidden_ver2.
(hidden_tls_def): New macro.
(libc_hidden_tls_def): Likewise.
(rtld_hidden_tls_def): Likewise.
(libm_hidden_tls_def): Likewise.
(libmvec_hidden_tls_def): Likewise.
(libresolv_hidden_tls_def): Likewise.
(librt_hidden_tls_def): Likewise.
(libdl_hidden_tls_def): Likewise.
(libnss_files_hidden_tls_def): Likewise.
(libnsl_hidden_tls_def): Likewise.
(libnss_nisplus_hidden_tls_def): Likewise.
(libutil_hidden_tls_def): Likewise.
(libutil_hidden_tls_def): Likweise.
* sysdeps/powerpc/nofpu/sim-full.c (__sim_exceptions_thread): Use
libc_hidden_tls_def.
(__sim_disabled_exceptions_thread): Likewise.
(__sim_round_mode_thread): Likewise.
Similar to the x86_64 and armv7 build issues, glibc fails to build for
sparc64 with current mainline GCC because of aliases declared in the
course of defining IFUNCs, which copy their attributes from a header
declaration, ending up with fewer attributes than the (built-in)
string function they alias. This patch fixes the issue similarly to
the fixes for those other architectures.
Tested with build-many-glibcs.py compilers build for
sparc64-linux-gnu.
* sysdeps/sparc/sparc-ifunc.h [SHARED]
(sparc_ifunc_redirected_hidden_def): Use __attribute_copy__ to
copy attributes from name.
Similar to the x86_64 build issues, glibc fails to build for armv7
with current mainline GCC because of aliases declared in the course of
defining IFUNCs, which copy their attributes from a header
declaration, ending up with fewer attributes than the (built-in)
string function they alias: the relevant attributes (nonnull, leaf)
are present on the header declaration, but elided therefrom when glibc
itself if being built (whatever the reasons are for disabling the
nonnull and leaf attributes in that case, and whether or not those
reasons are actually still valid). This patch fixes the issue
similarly to the x86_64 fix, by adding an addition __attribute_copy__
use (in this case, on the definition of arm_libc_ifunc_hidden_def).
Tested with build-many-glibcs.py build for armeb-linux-gnueabi-be8.
* sysdeps/arm/arm-ifunc.h [SHARED] (arm_libc_ifunc_hidden_def):
Use __attribute_copy__ to copy attributes from name.
This patch fixes the glibc build for i686 with current mainline GCC,
where there are warnings about inconsistent attributes for aliases in
certain files defining libm IFUNCs.
In three of the files, the aliases were defined in terms of internal
symbols such as __sinf, and copied attributes from file-local
declarations of those functions which lacked the nothrow attribute.
Since the nothrow attribute is present on the declarations from
<math.h> (which include declarations of those __-prefixed functions),
the natural fix was to include <math.h> in those files, replacing the
local declarations.
In the other three files, a more complicated __hidden_ver1 call was
involved in the warnings. <math.h> has not been included at this
point and, furthermore, it is included indirectly only later in the
source file after macros have been defined to remap a function name
therein. So there isn't an obvious declaration from which to copy the
attribute and it seems simplest and safest just to add __THROW to the
hidden_ver1 calls.
Tested for i686 (build-many-glibcs.py compilers build for
x86_64-linux-gnu with GCC mainline; full testsuite run with GCC 7).
* sysdeps/i386/i686/fpu/multiarch/e_expf.c [SHARED]: Use __THROW
with __hidden_ver1 call.
* sysdeps/i386/i686/fpu/multiarch/e_log2f.c [SHARED]: Likewise.
* sysdeps/i386/i686/fpu/multiarch/e_logf.c [SHARED]: Likewise.
* sysdeps/i386/i686/fpu/multiarch/s_cosf.c: Include <math.h>.
(__cosf): Do not declare here.
* sysdeps/i386/i686/fpu/multiarch/s_sincosf.c: Include <math.h>.
(__sincosf): Do not declare here.
* sysdeps/i386/i686/fpu/multiarch/s_sinf.c: Include <math.h>.
(__sinf): Do not declare here.
After the changes to use the copy attribute, building glibc for ia64
fails, even with older compilers, because
sysdeps/ia64/fpu/sfp-machine.h has a definition of _strong_alias that
now differs from the one in libc-symbols.h.
That definition is a relic of this file coming from libgcc, as are
some other such macro definitions in this file; in the glibc context,
there is no need for those macros, and this patch removes them to fix
the build.
Tested with build-many-glibcs.py for ia64-linux-gnu.
* sysdeps/ia64/fpu/sfp-machine.h (__LITTLE_ENDIAN): Remove.
(__BIG_ENDIAN): Likewise.
(__BYTE_ORDER): Likewise.
(strong_alias): Likewise.
(_strong_alias): Likewise.
This commit is in preparation of turning the macro into a proper
function. The output arguments of the macro were in fact unused.
Also clean up uses of __builtin_expect.
* hurd/hurd/userlink.h (_hurd_userlink_move): New function.
* hurd/hurd/port.h (_hurd_port_move): New function.
* sysdeps/mach/hurd/spawni.c (NEW_ULINK_TABLE): New macro.
(EXPAND_DTABLE): Use NEW_ULINK_TABLE macro for ulink_dtable.
This fixes build-many-glibcs.py on i686-gnu.
Thanks Florian Weimer for the initial version.
* sysdeps/mach/hurd/spawni.c (__spawni): Add ccwdir port. Test and use
it, free it if needed.
(reauthenticate): Test and use ccwdir.
(child_init_port): In non-resetids case, test and use ccwdir.
(child_chdir): New nested function to set ccwdir.
GCC 9 has gained an enhancement to help detect attribute mismatches
between alias declarations and their targets. It consists of a new
warning, -Wattribute-alias, an enhancement to an existing warning,
-Wmissing-attributes, and a new attribute called copy.
The purpose of the warnings is to help identify either possible bugs
(an alias declared with more restrictive attributes than its target
promises) or optimization or diagnostic opportunities (an alias target
missing some attributes that it could be declared with that might
benefit analysis and code generation). The purpose of the new
attribute is to easily apply (almost) the same set of attributes
to one declaration as those already present on another.
As expected (and intended) the enhancement triggers warnings for
many alias declarations in Glibc code. This change, tested on
x86_64-linux, avoids all instances of the new warnings by making
use of the attribute where appropriate. To fully benefit from
the enhancement Glibc will need to be compiled with
-Wattribute-alias=2 and remaining warnings reviewed and dealt with
(there are a couple of thousand but most should be straightforward
to deal with).
ChangeLog:
* include/libc-symbols.h (__attribute_copy__): Define macro unless
it's already defined.
(_strong_alias): Use __attribute_copy__.
(_weak_alias, __hidden_ver1, __hidden_nolink2): Same.
* misc/sys/cdefs.h (__attribute_copy__): New macro.
* sysdeps/x86_64/multiarch/memchr.c (memchr): Use __attribute_copy__.
* sysdeps/x86_64/multiarch/memcmp.c (memcmp): Same.
* sysdeps/x86_64/multiarch/mempcpy.c (mempcpy): Same.
* sysdeps/x86_64/multiarch/memset.c (memset): Same.
* sysdeps/x86_64/multiarch/stpcpy.c (stpcpy): Same.
* sysdeps/x86_64/multiarch/strcat.c (strcat): Same.
* sysdeps/x86_64/multiarch/strchr.c (strchr): Same.
* sysdeps/x86_64/multiarch/strcmp.c (strcmp): Same.
* sysdeps/x86_64/multiarch/strcpy.c (strcpy): Same.
* sysdeps/x86_64/multiarch/strcspn.c (strcspn): Same.
* sysdeps/x86_64/multiarch/strlen.c (strlen): Same.
* sysdeps/x86_64/multiarch/strncmp.c (strncmp): Same.
* sysdeps/x86_64/multiarch/strncpy.c (strncpy): Same.
* sysdeps/x86_64/multiarch/strnlen.c (strnlen): Same.
* sysdeps/x86_64/multiarch/strpbrk.c (strpbrk): Same.
* sysdeps/x86_64/multiarch/strrchr.c (strrchr): Same.
* sysdeps/x86_64/multiarch/strspn.c (strspn): Same.
The function do_test, in tst-efgcvt.c, increments an error counter for
each error that it finds, then returns it to the test framework.
However, the test framework does not expect an error count as return,
but zero for a passing test, one for a failing test, or 77 for an
unsupported test. Alternatively, the framework provides the function
support_record_failure that records errors, which then allows the test
program to return zero unconditionally.
This patch removes the error counter, replaces each increment of the
counter with a call to support_record_failure, and makes do_test
unconditionally return zero.
Tested for powerpc64le (as-is and with a patched results table to check
that the error reporting actually works).
* misc/tst-efgcvt.c: Include support/check.h and
support/test-driver.c. Do not include test-skeleton.c.
(error_count): Remove.
(output_error): Replace increments to error_count with calls to
support_record_failure.
(output_r_error): Likewise.
(special): Likewise.
(do_test): Unconditionally return zero.
(TEST_FUNCTION): Remove.
conform/Makefile creates $(@D)/scratch for the per-standard per-header
tests. That directory was formerly used by the Perl scripts for
temporary files, but the Python implementations use
tempfile.TemporaryDirectory to get such files cleaned up
automatically. This patch changes the Makefile to create only $(@D)
(required for the output redirection to work), not the scratch
subdirectory.
Tested for x86_64.
* conform/Makefile ($(conformtest-header-tests)): Create $(@D),
not $(@D)/scratch.
($(linknamespace-header-tests)): Likewise.
Continuing the consolidation on Python for various miscellaneous build
and test scripts, this patch moves conformtest from Perl to Python.
The substance of the tests run is intended to be the same as before,
except that the previous test for tags did not actually achieve the
intended purpose of verifying whether a tag was already declared, so
is changed to one that would actually fail for a tag that wasn't
declared, and a typo in the old test for variables being available
($xyzzy instead of xyzzy) would have made that test not use the
correct type (but it would have passed anyway with warnings). No
attempt is made to keep the details of what the test output looks
like; instead, tests are given names which are made to follow PASS: /
FAIL: / XFAIL: / SKIP: / MISSING: as appropriate.
In the new version, there is more consistent parsing of test lines
(into a series of words, either surrounded by {} or separated by
spaces) that applies for all kinds of test lines, rather than the old
approach of different regular expressions for every kind of test. A
few of the conform/data/ files are adjusted so their syntax works with
the new script (which now requires spaces in certain cases where the
old script tolerated them being missing, and does not allow stray
semicolons at the end of "function" lines). Similarly, common logic
is used around what happens with a second subtest if a first one fails
(e.g., a test for a symbol's type if the test for availability fails),
rather than such logic being replicated separately for each kind of
test. Common parsing also applies for test lines both when they are
lines for the header under test and when they are lines for another
header specified with allow-header, again unlike the old script.
Tested for x86_64, and with build-many-glibcs.py.
* conform/conformtest.py: New file.
* conform/conformtest.pl: Remove.
* conform/GlibcConform.pm: Likewise.
* conform/glibcconform.py (KEYWORDS_C90): New constant.
(KEYWORDS_C99): Likewise.
(KEYWORDS): Likewise.
* conform/Makefile ($(conformtest-header-tests)): Use
conformtest.py instead of conformtest.pl. Do not pass --tmpdir
option. Use --header instead of --headers.
* conform/data/arpa/inet.h-data: Remove trailing semicolons on
function entries.
* conform/data/spawn.h-data: Likewise.
* conform/data/fcntl.h-data (openat): Add space after function
name.
* conform/data/wchar.h-data (wcscasecmp): Likewise.
(wcscasecmp_l): Likewise.
* conform/data/termios.h-data (c_cc): Add space after element
name.
The commit
commit 1df872fd74
Author: Florian Weimer <fweimer@redhat.com>
Date: Wed Nov 7 12:42:44 2018 +0100
support: Implement TEST_COMPARE_STRING
added the new macro TEST_COMPARE_STRING, which compares the output of
functions under test against expected strings, and, when there's a
mismatch, automatically reports an error and prints the differences.
This patch adapts recently added test cases to use this new macro.
Tested for powerpc64le (as is, and locally patched to intentionally fail
and produce error output).
* argp/tst-ldbl-argp.c (do_one_test): Use TEST_COMPARE_STRING,
instead of manually comparing and reporting mismatching strings.
* misc/tst-ldbl-error.c (do_one_test): Likewise.
* misc/tst-ldbl-warn.c (do_one_test): Likewise.
The __ASSUME_SOCKETCALL macro in kernel-features.h is no longer used
for anything. (It used to be used in defining other macros related to
accept4 / recvmmsg / sendmmsg availability, but the code in that area
was simplified once we could assume a kernel with those features,
whether through a syscall or through socketcall, so allowing those
functions to be handled much like other socket operations, without
requring __ASSUME_SOCKETCALL.) This patch removes that unused macro.
(Note: once we can assume a Linux 4.4 or later kernel, much of the
support for using socketcall at all can be removed from glibc,
although a few functions may need that support in glibc for longer.)
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/kernel-features.h: Remove comment about
__ASSUME_SOCKETCALL.
* sysdeps/unix/sysv/linux/i386/kernel-features.h
(__ASSUME_SOCKETCALL): Remove.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_SOCKETCALL): Likewise.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_SOCKETCALL): Likewise.
* sysdeps/unix/sysv/linux/powerpc/kernel-features.h
(__ASSUME_SOCKETCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
(__ASSUME_SOCKETCALL): Likewise.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_SOCKETCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h
(__ASSUME_SOCKETCALL): Likewise.
Linkers group input note sections with the same name into one output
note section with the same name. One output note section is placed in
one PT_NOTE segment. Since new linkers merge input .note.gnu.property
sections into one output .note.gnu.property section, there is only
one NT_GNU_PROPERTY_TYPE_0 note in one PT_NOTE segment with new linkers.
Since older linkers treat input .note.gnu.property section as a generic
note section and just concatenate all input .note.gnu.property sections
into one output .note.gnu.property section without merging them, we may
see multiple NT_GNU_PROPERTY_TYPE_0 notes in one PT_NOTE segment with
older linkers.
When an older linker is used to created the program on CET-enabled OS,
the linker output has a single .note.gnu.property section with multiple
NT_GNU_PROPERTY_TYPE_0 notes, some of which have IBT and SHSTK enable
bits set even if the program isn't CET enabled. Such programs will
crash on CET-enabled machines. This patch updates the note parser:
1. Skip note parsing if a NT_GNU_PROPERTY_TYPE_0 note has been processed.
2. Check multiple NT_GNU_PROPERTY_TYPE_0 notes.
[BZ #23509]
* sysdeps/x86/dl-prop.h (_dl_process_cet_property_note): Skip
note parsing if a NT_GNU_PROPERTY_TYPE_0 note has been processed.
Update the l_cet field when processing NT_GNU_PROPERTY_TYPE_0 note.
Check multiple NT_GNU_PROPERTY_TYPE_0 notes.
* sysdeps/x86/link_map.h (l_cet): Expand to 3 bits, Add
lc_unknown.
The generic kernel-features.h defines __ASSUME_MLOCK2 for 4.4 and
later kernels. However, for 32-bit ARM binaries running on 64-bit ARM
kernels, and for MicroBlaze, the syscall was only wired up in the 4.7
kernel. (32-bit ARM kernels did have the syscall from 4.4 onwards.)
This patch duly arranges for the macro to be undefined for those
architectures for kernels before 4.7.
Tested with build-many-glibcs.py for its ARM and MicroBlaze
configurations.
[BZ #23867]
* sysdeps/unix/sysv/linux/arm/kernel-features.h
[__LINUX_KERNEL_VERSION < 0x040700] (__ASSUME_MLOCK2): Undefine.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
[__LINUX_KERNEL_VERSION < 0x040700] (__ASSUME_MLOCK2): Undefine.
Fix the following on 32 bits targets:
support_test_compare_string.c: In function ‘support_test_compare_string’:
support_test_compare_string.c:80:37: error: format ‘%lu’ expects argument of
type ‘long unsigned int’, but argument 2 has type ‘size_t’ {aka ‘unsigned int’}
[-Werror=format=]
printf (" string length: %lu bytes\n", left_length);
~~^ ~~~~~~~~~~~
%u
Checked on arm-linux-gnueabihf.
* support/support_test_compare_string.c
(support_test_compare_string): Fix printf format.
The SH kernel-features.h undefines __ASSUME_RENAMEAT2 for kernel
versions before 4.8, but fails to undefine __ASSUME_EXECVEAT,
__ASSUME_MLOCK2 and __ASSUME_COPY_FILE_RANGE, although all those
syscalls (and several others) were added for SH in the same Linux
kernel commit (first released in 4.8). This patch adds the proper
undefines of those macros.
Tested with build-many-glibcs.py for its SH configurations.
[BZ #23862]
* sysdeps/unix/sysv/linux/sh/kernel-features.h
[__LINUX_KERNEL_VERSION < 0x040800] (__ASSUME_EXECVEAT): Undefine.
[__LINUX_KERNEL_VERSION < 0x040800] (__ASSUME_MLOCK2): Likewise.
[__LINUX_KERNEL_VERSION < 0x040800] (__ASSUME_COPY_FILE_RANGE):
Likewise.
Similarly to what has been done for argp_error, and argp_failure, as
well as for warn, warnx, vwarn, and vwarnx, this patch adds new tests
for the following functions: err, errx, verr, verrx, error, and
error_at_line. The new tests check that the conversion of long double
variables into string works correctly on the default format of the type.
Future patches will reuse these tests for other formats that long double
can take.
Tested for powerpc64le.
* misc/Makefile (tests): Add tst-ldbl-error.
* misc/tst-ldbl-error.c: New file.
Similarly to what has been done for argp_error and argp_failure, this
patch patch adds new tests for the warn, warnx, vwarn, and vwarnx
functions. The new tests use the format string to request the
conversion of long double parameters into string. Currently, these
tests only check that the default format of the long double type works.
Future patches will extend the test for platforms that can have an
optional format for long double.
Tested for powerpc64le.
* misc/Makefile (tests): Add tst-ldbl-warn.
* misc/tst-ldbl-warn.c: New file.
The functions argp_error and argp_failure, from argp.h, have a format
string as parameter, which can possibly request the printing of
floating-point values. These values could be of long double type, which
can have different formats, depending on the architecture and on
compilation parameters (for instance, on powerpc, long double values can
have double format (-mlong-double-64) or IBM Extended Precision format
(-mlong-double-128)).
This patch adds tests for argp_error and argp_failure that contain a
format string with double and long double conversion specifiers ('%f'
and '%Lf'). These tests automatically check that the default format of
the long double type works. A future patch will extend the test for
platforms that can have an optional format for long double.
Tested for powerpc64le.
* argp/Makefile (tests): Add tst-ldbl-argp.
* argp/tst-ldbl-argp.c: New file.
__gconv_read_conf is only ever called once during the program's lifetime.
This means that __gconv_path_elem is always uninitialized when the function
begins executing. __gconv_get_path has an assert to ensure that this
expected runtime behaviour is always exhibited. Given this, checking for a
NULL value before calling __gconv_get_path is unnecessary. This commit
drops the condition and calls __gconv_get_path unconditionally.
Here only add the implementation when building the RV32 port.
These macros are used when the following situations occur at the same
time: soft-fp fma, ldbl-128 and 32-bit _FP_W_TYPE_SIZE. The RISC-V
32-bit port is the first port which use all three together.
This is the building flow about the situation:
When building soft-fp/s_fmal.c, there uses the FP_FMA_Q in __fmal.
The _FP_W_TYPE_SIZE is defined to 32-bit in sysdeps/riscv/sfp-machine.h,
so the FP_FMA_Q was defined to _FP_FMA (Q, 4, 8, R, X, Y, Z) in
soft-fp/quad.h.
Something in the soft-fp/quad.h:
#if _FP_W_TYPE_SIZE < 64
# define FP_FMA_Q(R, X, Y, Z) _FP_FMA (Q, 4, 8, R, X, Y, Z)
#else
# define FP_FMA_Q(R, X, Y, Z) _FP_FMA (Q, 2, 4, R, X, Y, Z)
#endif
Finally, in _FP_FMA (fs, wc, dwc, R, X, Y, Z), it will use the
_FP_FRAC_HIGHBIT_DW_##dwc macro, and it will be expanded to
_FP_FRAC_HIGHBIT_DW_8, but the _FP_FRAC_HIGHBIT_DW_8 is not be
implemented in soft-fp/op-8.h. there is only _FP_FRAC_HIGHBIT_DW_1,
_FP_FRAC_HIGHBIT_DW_2 and _FP_FRAC_HIGHBIT_DW_4 in the
soft-fp/op-*.h.
After this modification, we can pass the soft floating testing of glibc
testsuites on RV32.
* soft-fp/op-8.h (_FP_FRAC_SET_8, _FP_FRAC_ADD_8, _FP_FRAC_SUB_8)
(_FP_FRAC_CLZ_8, _FP_MINFRAC_8, _FP_FRAC_NEGP_8, _FP_FRAC_ZEROP_8)
(_FP_FRAC_HIGHBIT_DW_8, _FP_FRAC_COPY_4_8, _FP_FRAC_COPY_8_4)
(__FP_FRAC_SET_8): Add implementation for RV32 use.
In FRAC_SUB_3(R, X, Y) and FRAC_SUB_4(R,, X, Y), it reference both
the X[N] and X[N] after R[N] have been set. If one of the X and Y is
the same address with R, the result of the calculation is wrong,
because the value of the original X and Y are overwritten.
In glibc, there are two places use FRAC_SUB and occurs the overlap.
The first is _FP_DIV_MEAT_N_loop in op-common.h, it uses the source
_FP_DIV_MEAT_N_loop_u as the destination. This macro only be used
when N is one(_FP_DIV_MEAT_1_loop) and then the _FP_FRAC_SUB_##wc
extend to _FP_FRAC_SUB_1 in this macro. so it also work because
_FP_FRAC_SUB_1 has no overlap problem in its implementation.
The second places is _FP_DIV_MEAT_4_udiv, the original value of X##_f[0]
is overwritten before the calculatation.
In FRAC_SUB_1 and FRAC_SUB_2, there don't refer the source after
destination have been set, so they have no problem.
After this modification, we can pass the soft floating testing of glibc
testsuites on RV32.
* soft-fp/op-4.h (_FP_FRAC_SUB_3, _FP_FRAC_SUB_4): Use temporary
variable to avoid overlap arguments.
Building posix/bug-regex22.c fails with GCC mainline because of
-Wformat-overflow= warnings for NULL arguments to %s formats.
This is *not* testing how glibc handles such format arguments; in the
context of the messages in question it makes no sense to pass NULL to
such a %s format (the code passes s, inside "if (s == NULL)"). So
this patch changes the code not to pass such a format argument at all
(which means the string passed is constant, so no need to use printf
at all - however, there are two separate tests here with different
length arguments passed to re_compile_pattern, so it *does* make sense
to make the strings used different so that in the event of failure
it's clear which one of the tests failed).
Tested with build-many-glibcs.py with GCC mainline for
aarch64-linux-gnu.
* posix/bug-regex22.c (main): Use puts with distinct error
messages for unexpected success of re_compile_pattern, not printf
with NULL argument to %s.
Recent GCC -Wformat-overflow= changes result in some printf tests
failing to build, because those tests are deliberately testing the
handling of formats writing more than INT_MAX characters and the
handling of NULL arguments to the %s format, which GCC now warns
about. This patch duly disables -Wformat-overflow= for the relevant
calls to printf functions.
Tested with build-many-glibcs.py with GCC mainline for
aarch64-linux-gnu.
* stdio-common/bug22.c: Include <libc-diag.h>.
(do_test): Disable -Wformat-overflow= warnings around fprintf
calls outputting more than INT_MAX characters.
* stdio-common/tst-printf.c: Disable -Wformat-overflow= warnings
around printf call with NULL %s argument.
Looking at kernel-features.h files, I saw that SPARC was missing full
information on when it gained separate socket syscalls.
This patch adds such information to the SPARC kernel-features.h. It
also corrects what appear to be bugs in the existing code (that would
cause syscalls to be assumed to be present when not actually present).
Various __ASSUME_* macros, defined by default, were not undefined for
32-bit despite those syscalls only being added for 32-bit in Linux
4.4. Some syscalls were used in the SPARC64 syscalls.list but only
added in 4.4; this was harmless before the __NR_* macros were defined
at all, but once the macros were defined it means a build with
post-4.4 headers would assume the syscalls to be present regardless of
--enable-kernel version. Then, various __ASSUME_* macros were
previously not defined in cases where they could be defined (this part
of the patch is just an optimization, not a bug fix).
Note the observation in a comment in the patch that even the latest
Linux kernel for SPARC does not have getpeername and getsockname
syscalls in the compat syscall table for 32-bit binaries on 64-bit
kernels (so glibc can't assume those syscalls to be present for 32-bit
at all, although the 32-bit syscall table gained them in 4.4).
Tested (compilation only) for SPARC with build-many-glibcs.py.
[BZ #23848]
* sysdeps/unix/sysv/linux/sparc/kernel-features.h [!__arch64__ &&
__LINUX_KERNEL_VERSION < 0x040400] (__ASSUME_SENDMSG_SYSCALL):
Undefine.
[!__arch64__ && __LINUX_KERNEL_VERSION < 0x040400]
(__ASSUME_RECVMSG_SYSCALL): Likewise.
[!__arch64__ && __LINUX_KERNEL_VERSION < 0x040400]
(__ASSUME_SENDTO_SYSCALL): Likewise.
[!__arch64__ && __LINUX_KERNEL_VERSION < 0x040400]
(__ASSUME_ACCEPT_SYSCALL): Undefine under this condition, not just
[!__arch64__].
[!__arch64__ && __LINUX_KERNEL_VERSION < 0x040400]
(__ASSUME_CONNECT_SYSCALL): Likewise.
[!__arch64__ && __LINUX_KERNEL_VERSION < 0x040400]
(__ASSUME_RECVFROM_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x040400] (__ASSUME_BIND_SYSCALL):
Define.
[__LINUX_KERNEL_VERSION >= 0x040400] (__ASSUME_LISTEN_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x040400]
(__ASSUME_SETSOCKOPT_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/syscalls.list (bind):
Remove.
(listen): Likewise.
(setsockopt): Likewise.
GAS treats the R5900 as MIPS III, with some modifications. The MIPS III
designation means that the GNU C Library will try to assemble the LL and
SC instructions, even though they are not implemented in the R5900. GAS
will therefore produce the following errors:
Error: opcode not supported on this processor: r5900 (mips3) `ll $2,0($4)'
Error: opcode not supported on this processor: r5900 (mips3) `sc $6,0($4)'
The MIPS II ISA override as used here enables the kernel to trap and
emulate the LL and SC instructions, as required.
This change has been tested by compiling the GNU C Library 2.27 with a
GCC 8.2.0 cross-compiler for mipsr5900el-unknown-linux-gnu under Gentoo.
* sysdeps/mips/sys/tas.h (_test_and_set): Handle the R5900 CPU
with the ISA override.
The #else of two nested #if clauses were identical.
* sysdeps/unix/sysv/linux/sysdep-vdso.h: Simplify an #if #else
#endif.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
This patch replaces conform/linknamespace.pl with a new
conform/linknamespace.py, so continuing the consolidation on Python
instead of Perl for miscellaneous scripts used in building and testing
glibc. The new script follows the same logic as the old one; as a
recently-added script, there were no major cleanups to be made in the
course of the language conversion.
Tested for x86_64, and with build-many-glibcs.py. For x86_64 I also
tested that if the Perl and Python scripts were made to print all the
symbols in seen_where and the paths of symbol references by which
those symbols were linked in, even when those symbols were OK,
identical symbol lists appeared in the output with both versions of
the script (the differences in linknamespace.out files were only in
paths to temporary files in diagnostics for e.g. deprecated functions,
and error output for the expected compilation failures when testing
ndbm.h and varargs.h).
* conform/linknamespace.py: New file.
* conform/linknamespace.pl: Remove file.
* conform/Makefile ($(linknamespace-header-tests)): Use
linknamespace.py instead of linknamespace.pl. Do not use --tmpdir
option.
On systems without enough random-access memory, stdlib/test-bz22786
will go deeply into swap and time out, even with a substantial
TIMEOUTFACTOR. This commit adds a facility to construct repeating
strings with alias mappings, so that the requirement for physical
memory, and uses it in stdlib/test-bz22786.
Mark the ra register as undefined in _start, so that unwinding through
main works correctly. Also, don't use a tail call so that ra points after
the call to __libc_start_main, not after the previous call.
Now that we require Python 3.4 or later, Python code creating
temporary directories can use tempfile.TemporaryDirectory in "with" to
have the directory deleted automatically instead of needing to use
try/finally to handle removing a directory created with
tempfile.mkdtemp. This patch does so in conform/glibcconform.py.
Tested for x86_64.
* conform/glibcconform.py: Do not import shutil.
(list_exported_functions): Use tempfile.TemporaryDirectory instead
of mkdtemp.
This patch makes Python 3.4 or later a required tool for building
glibc, so allowing changes of awk, perl etc. code used in the build
and test to Python code without any such changes needing makefile
conditionals or to handle older Python versions.
This patch makes the configure test for Python check the version and
give an error if Python is missing or too old, and removes makefile
conditionals that are no longer needed. It does not itself convert
any code from another language to Python, and does not remove any
compatibility with older Python versions from existing scripts.
Tested for x86_64.
* configure.ac (PYTHON_PROG): Use AC_CHECK_PROG_VER. Set
critic_missing for versions before 3.4.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for Python to build glibc.
* INSTALL: Regenerated.
* Rules [PYTHON]: Make code unconditional.
* benchtests/Makefile [PYTHON]: Likewise.
* conform/Makefile [PYTHON]: Likewise.
* manual/Makefile [PYTHON]: Likewise.
* math/Makefile [PYTHON]: Likewise.
* sysdeps/mach/hurd/i386/intr-msg.h (INTR_MSG_TRAP): Make
_hurd_intr_rpc_msg_about_to global point to start of controlled
assembly snippet. Make it check canceled flag.
* hurd/hurdsig.c (_hurdsig_abort_rpcs): Only mutate thread if it passed
the _hurd_intr_rpc_msg_about_to point.
* hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): Remove comment on mutation
issue, remove cancel flag check.
since we do not actually know whether the RPC was completed or not,
which makes a huge difference for e.g. write(), so better really error
out than letting caller think that the RPC did not happen.
* hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): When the server does not
answer to interrupt_operation, return EIO instead of EINTR.
Seeing a server not able to get interrupted for 3s is not so surprising when
e.g. a lot of writes are happening. 1 minute allows to actually notice the
issue and be able to debug it.
* hurd/hurdsig.c (_hurd_interrupted_rpc_timeout): Set to 60000.
